Alpine CVA-1004R Manuale del proprietario

Marca: Alpine

Modello: CVA-1004R

Categoria: Ricevitori multimediali per auto

Tipo: Manuale del proprietario

Printed in Korea (Y)

68P02294K66-A

MOBILE MEDIA STATION

JEIL Moon Hwa Co.

18-6, 3Ga, Pil-dong, Jung-gu,

Seoul, Korea

CVA-1004R

• OWNER'S MANUAL

Please read before using this equipment.

• BEDIENUNGSANLEITUNG

Lesen Sie diese Bedienungsanleitung bitte vor

Gebrauch des Gerätes.

• MODE D'EMPLOI

Veuillez lire avant d'utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

• ISTRUZIONI PER L'USO

Si prega di leggere prima di utilizzare

l'attrezzatura.

• ANVÄNDARHANDLEDNING

Innan du använder utrustningen bör du läsa

igenom denna användarhandledning.

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku,

Tokyo 141-0031, Japan

Phone 03-5496-8231

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, Canada

Phone 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Phone 03-9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7,

40878 Ratingen, Germany

Phone 02102-4550

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House

Fletchamstead Highway, Coventry CV4 9TW, U.K.

Phone 0870-33 33 763

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,

B.P. 50016, 95945 Roissy Charles de Gaulle

Cedex, France

Phone 01-48638989

ALPINE ITALIA S.p.A.

Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), Italy

Phone 02-484781

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, Spain

Phone 945-283588

https://manual-hub.com/

CD changer for CVA-1004R.

CD-Wechsler für CVA-1004R.

Changeur CD pour CVA-1004R.

Cambiador de CD para CVA-1004R.

Cambia CD per CVA-1004R.

CD-växlare för CVA-1004R.

CHA-1214

CHM-S630

You cannot connect to CVA-1004R.

Il est impossible de se raccorder au CVA-1004R.

No es posible conectarlo a CVA-1004R.

Ein Anschluß an CVA-1004R ist nicht

möglich.

Non è possibile effettuare il collegamento a

CVA-1004R.

Du kan inte ansluta till CVA-1004R.

Alpine CD Changers Give You More!

More musical selections, more versatility, more convenience.

An Alpine CD Changer adds more musical choices to your sound system. All models except CHM-S630 can be controlled from Alpine

head units and deliver excellent sound quality. The CHA-S634 is a high-performance 6-disc changer with a new M DAC, Ai-NET

compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the

CHM-S630 M-Bus model is a super-compact 6-disc changer.

Von Alpine CD-Wechslern haben Sie mehr!

Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.

Mit einem Alpine CD-Wechsler erweitern Sie die Musikauswahl Ihres Systems. Sämtliche Modelle außer dem CHM-S630 lassen sich

von einer Alpine-Bedieneinheit aus steuern und liefern hervorragende Klangqualität. Der CHA-S634 ist ein Ai-NET-kompatibler

Hochleistungs-Wechsler für 6 CDs mit dem neuen M-DAC, Digitalausgang für Glasfaserkabel, CD-Titelspeicher für 150 Titel und CD-

TEXT. Das Ai-NET-Modell CHA-1214 nimmt 12 CDs auf, und der M-Bus-kompatible CHM-S630 ist ein superkompakter Wechsler für

6 CDs.

Changeurs de CD Alpine : vous avez le choix!

Plus de sélections musicales, plus de souplesse, plus de confort.

Un changeur de CD Alpine permet d'augmenter la plage des sélections musicales de votre système embarqué. Tous les modèles,

l'exception du CHM-S630, peuvent être contrôlés à partir des autoradios Alpine et offrent une excellente qualité audio. Le modèle CHA-

S634 est un changeur 6 disques ultra performant compatible Ai-NET et équipé d'un convertisseur N/A standard, d'une sortie optique

numérique, d'une mémoire d'une capacité de 150 titres et de la fonction CD TEXT. Le modèle CHA-1214 Ai-NET peut contenir 12

disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques super compact.

¡Los cambiadores Alpine de CD le ofrecen más!

Más selecciones musicales, más versatilidad y más ventajas.

Un cambiador Alpine de CD añade más opciones musicales a su equipo de sonido. Todos los modelos, excepto el CHM-S630, pueden

controlarse desde las unidades principales de Alpine y proporcionar un sonido de calidad excepcional. El modelo CHA-S634 es un

cambiador de 6 discos de alto rendimiento con el nuevo DAC "M" y compatibilidad con Ai-NET, salida digital óptica, memoria de

títulos de 150 discos y TEXTO CD. El modelo CHA-1214 Ai-NET admite 12 discos y el modelo CHM-S630 Bus-M es un cambiador de

6 discos y tamaño reducido.

I caricatori CD Alpine danno di più!

Più scelta, più versatilità, più comodità.

Un caricatore CD Alpine offre maggiore scelta. Tutti i modelli, eccetto il modello CHM-S630, possono essere controllati tramite le unità

di controllo Alpine e producono un suono di qualità eccellente. CHA-S634 è un caricatore a 6 dischi Ai NET compatibile e dotato di un

nuovo M DAC, di un'uscita ottica digitale, memorizzazione dei titoli di 150 dischi e CD TEXT. Il modello CHA-1214 Ai NET può

contenere un massimo di 12 dischi, mentre il modello CHM-S630 M-Bus è un caricatore a 6 dischi ultra compatto.

Alpines CD-växlare ger mer!

Fler musikval, mer variation, större bekvämlighet.

Med Alpines CD-växlare i systemet får du större musikalisk valfrihet. Alla modeller, utom CHM-S630, kan styras från Alpines

huvudenheter och ger enastående ljudkvalitet. CHA-S634 är en högpresterande växlare för 6 skivor med en ny M D/A-omvandlare,

kompatibel med Ai-NET, optisk digitalutgång, titelminne för 150 skivor och CD-TEXT. Modellen CHA-1214 Ai-NET rymmer 12 skivor

och modellen CHM-S630 M-Bus är en superkompakt växlare för 6 skivor.

CD changer for CVA-1004R.

CD-Wechsler für CVA-1004R.

Changeur CD pour CVA-1004R.

Cambiador de CD para CVA-1004R.

Cambia CD per CVA-1004R.

CD-växlare för CVA-1004R.

CHA-S634

https://manual-hub.com/

ENGLISH

DAB Operation (Optional)

Using DAB Receiver for the Ensemble Seek

Tuning .......................................................... 15

Changing the Service ...................................... 16

Changing the Service Component .................. 16

Memorizing the Service .................................. 16

Receiving the Memorized Service .................. 16

Memorizing the Ensemble Automatically ...... 17

PTY (Programme Type) Tuning ..................... 17

Turning ON/OFF Traffic News Announcement ....

Setting the Announcement Select Mode ......... 18

Changing the Display Mode ........................... 19

Receiving Announcement Information of DAB

Regional (Local) Stations ............................ 19

Setting for Automatic Change from DAB to RDS ....

Setting ON/OFF for DRC

(Dynamic Range Control) ........................... 20

CD/MP3/Changer Operation

(Optional)

Playing Optional CD player or Changer ......... 21

Repeat Play ..................................................... 22

M.I.X. (Random Play) .................................... 22

Scanning Programmes .................................... 23

Selecting Folders (concerning MP3) .............. 23

File/Folder Search (concerning MP3)............. 23

Controlling CD Changer ................................. 24

Playing MP3 Files with the CD Changer........ 24

Multi-Changer Selection ................................. 25

Setting the Range of MP3 File Selection ........ 25

DVD/Video CD/CD Player Operation

(Optional)

Playing DVD/Video CD/CD ........................... 26

Still/Pause ....................................................... 26

Chapter (DVD)/Track (Video CD) Sensor ...... 26

Fast Forward/Backward .................................. 26

Repeat Play ..................................................... 27

Controlling DVD Changer .............................. 27

1-EN

Contents

Operating Instructions

WARNING

WARNING .................................................. 3

CAUTION ................................................... 3

PRECAUTIONS ......................................... 3

Basic Operation

Detaching the Front Panel................................. 6

Attaching the Front Panel ................................. 6

Initial System Start-Up ..................................... 6

Turning Power On and Off ............................... 7

Raising the Monitor .......................................... 7

Lowering the Monitor ....................................... 7

Selecting the Monitor's Opening Position ........ 7

Adjusting the Monitor Viewing Angle .............. 8

Adjusting Volume/Balance (Between Left and

Right)/Fader (Between Front and Rear) ........ 8

Audio Mute Function ........................................ 8

Radio Operation

Manual Tuning .................................................. 9

Automatic Seek Tuning .................................... 9

Manual Storing of Station Presets .................... 9

Automatic Memory of Station Presets ............ 10

Tuning to Preset Stations ................................ 10

Selecting a Station from the List..................... 10

RDS Operation

Setting RDS Reception Mode and Receiving

RDS Stations ............................................... 11

Recalling Preset RDS Stations ........................ 11

Receiving RDS Regional (Local) Stations ..... 12

PI SEEK Setting.............................................. 12

Receiving Traffic Information ........................ 12

PTY (Programme Type) Tuning ..................... 13

Receiving Traffic Information While Playing

CD or Radio ................................................. 13

Priority PTY (Programme Type) .................... 14

Displaying Radio Text .................................... 14

https://manual-hub.com/

Navigation System Operation (Optional)

Turning on the Navigation Mode .................... 28

Interrupt Feature (NAV. MIX) ......................... 28

Interrupt Feature (NAV. MIX OUT) ............... 28

MobileHub™ Link Operation (Optional)

About MobileHub™ Link .............................. 29

Telephone Mode On and Off .......................... 29

Incoming Calls ................................................ 29

Calling ............................................................. 30

Calling by using the Speed Dial ................. 30

Calling by the Phone book ......................... 30

Calling by the outgoing history .................. 30

Calling by the incoming history ................. 31

Calling by the incoming missed call history ..

SMS (Short Message Service) Operation ....... 31

Setting the Call Receiving Method ................. 31

Other Useful Features

Displaying the Title/Text................................. 32

Titling Discs/Stations ...................................... 33

Erasing Disc Title/Station Title ....................... 33

Setting the Bass Control ................................. 34

Setting the Treble Control ............................... 35

Switching Phase .............................................. 36

Turning Loudness On and Off ........................ 36

Turning Defeat Mode On and Off ................... 36

Illumination Control ....................................... 37

Adjusting Brightness of Picture ...................... 37

Adjusting Colour of Picture ............................ 37

Adjusting Tint of Picture ................................. 38

Setting the Background Screen Colour

(DAY/NIGHT) ............................................. 38

Setting the Automatic Background Screen

Colour .......................................................... 38

Scroll Setting................................................... 39

Setting Automatic Opening/Closing of Monitor

..................................................................... 39

Turning Sound Guide Function On or Off ...... 40

Setting the Clock Display ............................... 40

Displaying Time .............................................. 40

Setting Time .................................................... 40

Automatic Time Adjustment ........................... 41

Setting the External Expansion Box ............... 41

Rear Monitor Setting ...................................... 41

Setting the External Input ............................... 42

Setting Front/Rear/Subwoofer Preout of the

External Expansion Box .............................. 43

Displaying Spectrum Analyzer ....................... 43

Switching the Tuner Mode .............................. 44

Adjusting Source Signal Levels ...................... 44

Subwoofer Control On and Off ....................... 44

Turning Mute Mode On and Off ..................... 45

Changing the Radio Frequencies for each

Country ........................................................ 45

Switching Disc Mode...................................... 45

Operating an External Audio Processor

(Optional) .................................................... 46

Simultaneous Operation .................................. 46

Switching Display Mode ................................ 47

Operation with the Monitor Closed ..................

Information

In Case of Difficulty ....................................... 49

Specifications .................................................. 50

Installation and

Connections

Warning ........................................................... 51

Caution ............................................................ 51

Precautions ...................................................... 51

Installation ...................................................... 52

Connections .................................................... 54

2-EN

https://manual-hub.com/

3-EN

WARNING

This symbol means important instructions.

Failure to heed them can result in serious

injury or death.

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

Any function that requires your prolonged attention

should only be performed after coming to a complete stop.

Always stop the vehicle in a safe location before

performing these functions. Failure to do so may result in

an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE THIS PRODUCT FOR MOBILE 12V

APPLICATIONS.

Use for other than its designed application may result in

fire, electric shock or other injury.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result

in fire.

DO NOT PLACE HANDS, FINGERS OR FOREIGN

OBJECTS IN INSERTION SLOTS OR GAPS.

Doing so may result in personal injury or damage to the

product.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If

swallowed, consult a physician immediately.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

(Check with your dealer if you are not sure.) Failure to do

so may result in fire, etc.

CAUTION

This symbol means important instructions.

Failure to heed them can result in injury or

material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to

the product. Return it to your authorized Alpine dealer or

the nearest Alpine Service Centre for repairing.

KEEP FINGERS AWAY WHILE THE MOTORIZED

FRONT PANEL OR MOVING MONITOR IS IN

MOTION.

Failure to do so may result in personal injury or damage to

the product.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between

+45°C (+113°F) and 0°C (+32°F) before turning your unit

on.

Maintenance

If you have problems, do not attempt to repair the unit

yourself. Return it to your Alpine dealer or the nearest

Alpine Service Station for servicing.

Installation Location

Make sure the CVA-1004R will not be installed in a

location subjected to:

• Direct sun and heat

• High humidity and water

• Excessive dust

• Excessive vibrations

Handling the Detachable Front Panel

• Do not expose to rain or water.

• Do not drop or apply shock.

https://manual-hub.com/

4-EN

WARNING

Operation of some of the functions of this unit is very

complex. Because of this, it was deemed necessary to

place these functions into a special screen. This will

restrict operation of these functions to times when the

vehicle is parked. This ensures the focus of the driver's

attention will be on the road and not on the CVA-1004R.

This has been done for the safety of the driver and

passengers.

The Title Input and SETUP screens cannot be made while

the car is moving. The car must be parked and the parking

brake must be engaged for the procedure described in the

Owner's Manual to be valid. These operations are not

possible while you are driving. Also if you attempt to

drive during operation, the display will show the warning

“CAN’T OPERATE WHILE DRIVING” for 5 seconds.

This operation is the same as when selecting sources

using the remote control (Optional). When the car is

parked, the selection is made as described in the Owner's

Manual.

Alpine products equipped with the Ai-NET bus,

connected to the CVA-1004R, can be operated from the

CVA-1004R. Depending on the products connected, the

functions and displays will vary. For details, consult your

Alpine dealer.

https://manual-hub.com/

5-EN

Introduction

You can operate most of the functions of this unit with the monitor open or

closed. For operations with the monitor closed, refer to page 48.

THE MONITOR IS OPEN

THE MONITOR IS CLOSED

displayed in the sub-display

displayed in

the monitor

https://manual-hub.com/

6-EN

Basic Operation

Detaching the Front Panel

1Press and hold SOURCE/PWR (Power) for more

than 2 seconds to turn off the power.

2Press (Release) at lower left side until the

front panel pops out.

3Grasp the left side of the front panel and pull it

out.

NOTES

•The front panel may become hot in normal usage

(especially the connector terminals), this is not a

malfunction.

•To protect the front panel, place it in the supplied

carrying case.

Attaching the Front Panel

1First, insert the right side of the front panel into

the main unit. Align the groove on the front panel

with the projections on the main unit.

2Push the left side of the front panel until it locks

firmly into the main unit.

NOTE

Before attaching the front panel, make sure that there is

no dirt or dust on the connector terminals and no foreign

object between the front panel and the main unit.

[Compatibility with Factory Steering Wheel

Radio Controls

If your vehicle has steering wheel controls for the

radio, an optional steering wheel control

interface may be available to connect your Alpine

radio. For details, contact your Alpine dealer.

[Controllable with Remote Control

This unit can be controlled with an optional

Alpine remote control. For details, consult your

Alpine dealer.

Point the optional remote control transmitter at

the remote control sensor.

• You can use the remote control even when the

monitor display is closed.

[CVA-1004R is not compatible with MD,

cassette tapes and a 3-disc changer.

Initial System Start-Up

Immediately after installing or applying power to the

unit, it should be initialized. To do this, first, remove

the detachable front panel. Behind the front panel, to

the right of the connector, there is a small hole.

Using a pencil or other pointed object, press the

Reset switch mounted behind this hole to complete

the initialization procedure.

RESET switch

SOURCE/PWR

OPEN/CLOSE

Remote control

sensor

Remote control

sensor

When the monitor

is closed.

When the monitor

is open.

https://manual-hub.com/

7-EN

Basic Operation

Turning Power On and Off

Some of this unit's functions, cannot be performed

while the vehicle is in motion. Be sure to stop your

vehicle in a safe location and apply the parking

brake, before attempting these operations.

1Press SOURCE/PWR (Power) to turn on the

unit.

The opening screen appears automatically on

the monitor.

NOTE

The unit can be turned on by pressing any other buttons

except OPEN/CLOSE, TITLE and TILT 7 8.

The volume level gradually increases to the

previous level you were listening to before the

unit was turned off. Press and hold SOURCE/

PWR (Power) for at least 2 seconds to turn off

the unit.

NOTES

•After turning the system off, a slight ghost of the image

will remain temporarily. This is an effect peculiar to

LCD technology and is normal.

•Under cold temperature conditions, the screen may

lose contrast temporarily. After a short warm-up

period, it will return to normal.

•The CVA-1004R draws minimal current even when its

power switch is turned off. If the switched power

(ignition) lead of the CVA-1004R is connected directly

to the positive (+) post of the vehicle's battery, the

battery may be discharged. If this lead is unswitched,

it must be disconnected from the battery post should

the vehicle be left unused for an extended period of

time.

An SPST (Single-Pole, Single-Throw) switch (sold

separately) can be added to simplify this procedure.

Then, you can simply place it in the OFF position

when you leave the vehicle. Turn the SPST switch back

ON before using the CVA-1004R. For connecting the

SPST switch, refer to "Connection Diagram of SPST

Switch" on page 53.

•Some operation of the unit cannot be performed while

the vehicle is in motion. In this case, be sure to first

stop your vehicle and apply the parking brake, then

perform the operation.

Raising the Monitor

1Press OPEN/CLOSE, or press and hold MUTE

on the optional Remote Control.

The unit beeps 3 times and raises the monitor

automatically.

NOTES

•The CVA-1004R is a precision device. With gentle

handling, its unique capabilities can be enjoyed for a

long time.

•If the monitor touches an obstacle while it is being

raised, the unit will stop raising the monitor

immediately. Should this occur, remove the obstacle

and press OPEN/CLOSE again to raise the monitor.

•When the movable monitor is opened, do not place any

object on the monitor and be careful not to bump or

apply any pressure to the monitor while it is open. This

can cause damage to the mechanism.

•Under low ambient temperature conditions, the

display may be dark for a short period of time

immediately after the power is turned on. Once the

LCD has warmed up, the display will return to

normal.

•For your safety, some operation of the unit cannot be

performed while the vehicle is in motion. In this case,

first stop the vehicle and engage the parking brake,

then perform the operation.

•If you select AUX or NAVI as the current source

without connecting to the CVA-1004R, a noise may

occur when you open the monitor. This is not a

malfunction.

Lowering the Monitor

1Press OPEN/CLOSE, or press and hold MUTE

on the optional Remote Control.

The unit will beep 3 times and lower the monitor

automatically.

NOTES

•The CVA-1004R is a precision device. With gentle

handling, its unique capabilities can be enjoyed for a

long time.

•If the monitor touches an obstacle while it is being

lowered, the unit will stop lowering the monitor

immediately.

Should this occur, remove the obstacle and press

OPEN/CLOSE again to lower the monitor.

•If you select AUX or NAVI as the current source

without connecting to the CVA-1004R, a noise may

occur when you close the monitor. This is not a

malfunction.

Selecting the Monitor's Opening

Position

The monitor's opening position has 2 settings.

1Press and hold OPEN/CLOSE for at least 2

seconds while the monitor is being raised. Each

press changes the monitor position back or forth.

https://manual-hub.com/

8-EN

MUTE/SETUP TILT 77

7 88

MODE

(Rotary encoder)

Basic Operation

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

1Press MODE (Rotary encoder) repeatedly to

choose the desired mode.

Each press changes the modes as follows:

NAV.Level: 0~15

Subwoofer: 0~15

Balance: L15~R15

Fader: R15~F15

Volume: 0~35

NOTE

If the Rotary encoder is not turned in 5 seconds after

selecting the BALANCE, FADER, NAV. Level or

SUBWOOFER mode, the unit automatically returns to

the VOLUME mode.

∗1When the SUBWOOFER mode is OFF (page 44), its

level cannot be adjusted.

∗2When the NAV.MIX mode is OFF (page 28), its level

cannot be adjusted.

2Tur n MODE (Rotary encoder) until the desired

sound is obtained in each mode.

Audio Mute Function

Activating this function will instantly lower the

volume level by 20 dB.

1Press MUTE/SETUP to activate the MUTE

mode. The audio level will decrease by about

20 dB.

Pressing MUTE/SETUP again will bring the

audio back to its previous level.

Adjusting the Monitor Viewing

Angle

Adjust the monitor's angle for better visibility.

1Press TILT 77

7 88

8 to adjust the monitor's angle so

the screen will be in the best viewing position.

Each press of the buttons produces a beep and

changes the screen angle between about 40 and

105 degrees.

When you press and hold TILT 77

7 or 88

8 for at least

2 seconds, the monitor's angle keeps moving

until you release the button.

NOTES

•If the monitor touches an obstacle while the angle is

being adjusted, the unit will stop the screen

immediately.

Should this happen, remove the obstacle and press

TILT 7or 8 again.

•The screen colour will vary when viewed at certain

angles. Adjust the screen angle for the best viewing

position.

•If the voltage of the vehicle's battery power is low, the

screen may blink when the screen angle is changed.

This is normal and not a malfunction.

CAUTION

Keep hands (or any other object) away from the display

while it is opening or closing to avoid damage or injury.

The back of the movable display will get very warm

under normal operating conditions. This is not a

malfunction. Do not touch.

→ NAV∗1 → SUB-W∗2 → BAL → FAD → VOL

https://manual-hub.com/

9-EN

Manual Tuning

1Press SOURCE/PWR until a radio band and

frequency appears in the display.

2Press BAND/TEL. repeatedly until the desired

radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → FM3 → MW → LW

3Press TUNE/A.ME repeatedly until "DX SEEK"

and "SEEK" disappear from the display.

NOTE

The initial mode is DX SEEK.

4Press g or f to move downward or upward

one step respectively until the desired station

frequency is displayed.

NOTE

The STEREO indicator appears on the monitor when a

Stereo FM station is tuned in.

Automatic Seek Tuning

1Press SOURCE/PWR until a radio band and

frequency appears in the display.

2Press BAND/TEL repeatedly until the desired

radio band is displayed.

Each press changes the band:

→ FM1 → FM2 → FM3 → MW → LW

3Press TUNE/A.ME to illuminate the DX and

SEEK indicators in the display.

With the DX (Distance) mode activated, both

strong and weak stations will be tuned in the

Auto-Seek operation.

Press again to return to the local mode. The DX

indicator will turn off and the SEEK indicator will

remain illuminated. Now, only strong stations will

be tuned.

4Press g or f to automatically seek for a

station downward or upward respectively.

The unit will stop at the next station it finds.

Press the same button again to seek the next

station.

Manual Storing of Station Presets

1Select the radio band and tune in a desired radio

station you wish to store in the preset memory.

2Press and hold any one of the preset buttons (1

through 6) for at least 2 seconds, into which you

want to store the station. The selected station is

stored. The display shows the band, preset No.

and station frequency memorized.

3Repeat the procedure to store up to 5 other

stations onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

A total of 30 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2,

FM3, MW or LW.)

NOTE

If you store a station in a preset memory which already

has a station, the current station will be cleared and

replaced with the new station.

Example of Radio mode Screen

BAND/TEL.

SOURCE/

PWR

gff

fPreset buttons

(1 through 6)

TUNE/

A.ME

Radio Operation

Volume Level Current Time

Selected Source

The current

setting status

Frequency of the

current station

Preset button

number for the

stored station

Station Title

https://manual-hub.com/

10-EN

Radio Operation

Automatic Memory of Station

Presets

1Press SOURCE/PWR to select the radio mode.

2Press BAND/TEL. repeatedly until the desired

radio band is displayed.

3Press and hold TUNE/A.ME for at least 2

seconds.

The frequency on the display continues to

change while the automatic memory is in

progress. The tuner will automatically seek and

store 6 strong stations in the selected band. They

will be stored into presets 1 to 6 buttons in order

of signal strength.

When the automatic memory has been

completed, the tuner goes to the station stored in

the preset location No. 1.

NOTE

If no stations are stored, the tuner will return to the

original station you were listening to before the auto

memory procedure began.

Tuning to Preset Stations

1Press SOURCE/PWR to select the radio mode.

2Press BAND/TEL. repeatedly until the desired

radio band is displayed.

3Press the station preset button that has your

desired radio station in memory.

The display shows the band, preset No. and

frequency of the station selected.

Selecting a Station from the List

You can display the list of your titled stations (refer

to “Titling Discs/Stations” on page 33), and select

a station from this list.

1When the monitor is open, press and hold the

Rotary encoder for at least 2 seconds.

The title list is displayed.

2Press g or f to select a station from the

list.

3Press the Rotary encoder to tune in the

selected station.

NOTE

To cancel the title list display, press and hold the Rotary

encoder for at least 2 seconds.

BAND/TEL.

SOURCE/

PWR

gff

fStation preset

buttons (1 through 6)

TUNE/A.ME

Rotary

encoder

https://manual-hub.com/

11-EN

Setting RDS Reception Mode and

Receiving RDS Stations

The RDS (Radio Data System) is a radio

information system using the 57 kHz subcarrier of

regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic

information, station names, and to automatically

re-tune to a stronger transmitter that is

broadcasting the same programme.

1Press FUNC so that the FUNC indicator appears

in the sub-display. To perform the same operation

with the monitor open, press FUNC only when

the "FUNC" indicator lights red in the monitor.

2Press 1/AF to activate the RDS mode.

3Press g or f to tune in the desired RDS

station.

4Press 1/AF again to deactivate the RDS mode.

5Press FUNC to activate the normal mode.

The FUNC indicator will turn off.

TIPS

• When the unit receives the PTY31 (Emergency

Broadcast) signal, the unit will show "ALARM" in the

display automatically.

• The RDS digital data includes the following:

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

PTY Programme Type

EON Enhanced Other Networks

R.TEXT Radio Text Information

CT Clock Time

Recalling Preset RDS Stations

1Press FUNC so that the FUNC indicator appears

in the sub-display. To perform the same operation

with the monitor open, press FUNC only when

the "FUNC" indicator lights red in the monitor.

2Press 1/AF to activate the RDS mode.

The display shows "AF" when the RDS mode is

activated.

3Press FUNC to activate the normal mode.

The FUNC indicator will turn off.

4Make sure that the FUNC indicator light goes

out, then press the preset button in which your

desired RDS station is preset.

If the preset station's signal is weak, the unit

automatically searches and tunes to a stronger

station in the AF (Alternative Frequencies) list.

5If the preset station and the stations in the AF list

cannot be received:

When the PI SEEK setting is on (refer to "PI

SEEK Setting" on page 12), the unit searches

again for a station in the PI (Programme

Identification) list.

If there are still no stations receivable in the area,

the unit displays the frequency of the preset

station and the preset indicator disappears.

If the signal level of the Regional (Local) station

being tuned becomes too weak to receive, press

the same preset button to tune in a Regional

station in other district.

NOTE

For presetting the RDS stations, refer to the Radio

Operation section. The RDS stations can be preset in the

FM1, FM2 and FM3 bands only.

RDS Operation

gff

fPreset buttons

(1 through 6)

1/AF

FUNC

https://manual-hub.com/

12-EN

RDS Operation

Receiving RDS Regional (Local)

Stations

1When the monitor is open, press and hold

MUTE/SETUP for at least 2 seconds. The

SETUP screen appears.

2Press preset 4 to activate the RADIO setting

mode. Press preset 4 again to select

REGIONAL.

3Press g or f to turn to OFF or ON the

REGIONAL mode.

In the REGIONAL OFF mode, the unit

automatically keeps receiving the related local

RDS station.

For any other settings, press preset 4 or another

preset button.

4After setting is completed, press MUTE/SETUP

to return to normal mode.

PI SEEK Setting

1When the monitor is open, press and hold

MUTE/SETUP for at least 2 seconds. The

SETUP screen appears.

2Press preset 4 to activate the RADIO setting

mode. Press preset 4 again to select PI SEEK.

3Press g or f to set PI SEEK to ON/OFF.

For any other settings, press preset 4 or another

preset button.

4After setting is completed, press MUTE/SETUP

to return to normal mode.

Receiving Traffic Information

1Press T.INFO/ANNC. to activate the Traffic

Information mode.

2Press g or f to select your desired traffic

information station. When a traffic information

station is tuned in, the TP indicator lights up.

Traffic information is heard only when it is being

broadcast. If traffic information is not being

broadcast, the unit is set in the standby mode.

When a traffic information broadcast begins, the

unit automatically receives it and the monitor

shows “T.INFO” during the traffic information

broadcast (sub-display shows "TRF-INFO" for 2

seconds, then returns to the previous display.)

When traffic information broadcast is over, the

unit will automatically set in the standby mode.

3Press T.INFO/ANNC. to activate the normal

mode.

NOTES

•If the traffic information broadcast signal falls below a

certain level, the unit remains in the receiving mode

for 1 minute. If the signal remains below a certain

level for over 1 minute, the "T.INFO" indicator blinks.

•If you do not want to listen to the traffic information

being received, lightly press T.INFO/ANNC. to skip

that traffic information message. The T.INFO mode

will remain in the ON position to receive the next

traffic information message.

•If the volume level is changed while receiving traffic

information, the changed volume level will be

memorized. When traffic information is received next

time, the volume level will be automatically adjusted

to the level memorized.

•In the T.INFO mode, the SEEK tuning selects only the

TP stations.

gff

fFUNCPreset 4

MUTE/SETUP

T.INFO/

ANNC.

2/PTY

https://manual-hub.com/

13-EN

Receiving Traffic Information While

Playing CD or Radio

1Press T.INFO/ANNC. repeatedly until the T.INFO

indicator appears in the display.

2Press g and f to select a traffic

information station if necessary.

•When a traffic information broadcast starts, the

unit automatically mutes the optional CD

player or the regular FM broadcast.

•When the traffic information broadcast finishes,

the unit automatically returns to the original

source play before the traffic information

broadcast began.

•When traffic information stations cannot be

received:

In the tuner mode:

When the TP signal can no longer be

received for over 1 minute, the "T.INFO"

indicator blinks.

In the CD mode:

When the TP signal can no longer be

received, the traffic information station of

another frequency will be selected

automatically.

NOTE

The receiver is equipped with the EON (Enhanced Other

Networks) function in order to keep track of additional

alternative frequencies to the AF list. The EON indicator

appears while an RDS EON station is being received. If

the station being received does not broadcast the traffic

information, the receiver automatically tunes in the

related station that broadcasts the traffic information

when it occurs.

3Press T.INFO/ANNC. to deactivate the Traffic

Information mode. The T.INFO indicator

disappears.

NOTE

The unit automatically switches to a traffic information

announcement even if you are listening to a source other

than the radio or CD player (e.g. DVD player).

PTY (Programme Type) Tuning

Press FUNC so that the FUNC indicator appears

in the sub-display. To perform the same operation

with the monitor open, press FUNC only when

"FUNC" lights red in the monitor.

Press 2/PTY to activate the PTY mode, while the

unit is in Radio (FM Receiving) mode. The

Programme Type of the station being currently

received will be displayed for 5 seconds.

If there is no receivable PTY broadcast, "NO

PTY" will be displayed for 2 seconds.

NOTE

If no button is pressed within 5 seconds after pressing

2/PTY, the PTY mode will be automatically cancelled.

3Press g or f within 5 seconds after

activating the PTY mode to choose the desired

programme type while the PTY (programme

type) is being displayed. Each press scrolls the

programme type by one.

→ LIGHT M → CLASSICS → OTHER M

Press 2/PTY within 5 seconds after selecting the

programme type to start searching for a station in

the selected programme type.

In the sub-display, the desired programme type

indicator blinks during the search, and lights when a

station is found. In the monitor, “PTY SEEK” is

displayed during the search, and the current

programme type name appears if the station is

found.

If no station is found, "NO PTY" will be displayed

for 2 seconds.

5Press FUNC to activate the normal mode. The

"FUNC" indicator will turn off.

RDS Operation

https://manual-hub.com/

14-EN

Priority PTY (Programme Type)

This function allows presetting of a programme

type such as music category, news, etc. You can

listen to a programme in the preset programme

type as the unit automatically gives priority to the

preset programme type when it begins

broadcasting, and interrupts the programme you

are currently listening. This feature is functional

when your unit is set to a mode other than the LW

and MW.

1Press FUNC so that the FUNC indicator appears

in the sub-display. To perform the same operation

with the monitor open, press FUNC only when

the "FUNC" indicator lights red in the monitor.

2Press 3/P.PTY to activate the PRIORITY PTY

mode.

In the sub-display, “PRIO PTy” is displayed for 2

seconds and then the programme type for 3

seconds. In the monitor, “P.PTY ” is displayed,

and the current programme type name appears.

The initial setting is "NEWS."

NOTE

If no button is pressed within 5 seconds after pressing

3/P.PTY, the PRIORITY PTY mode is automatically

cancelled.

3Press g or f within 5 seconds while

"NEWS" is being displayed to choose a desired

programme type. Then press 3/P.PTY. The

PRIORITY PTY function will activate.

RDS Operation

4Press 3/P.PTY to activate the PRIORITY PTY

mode again.

•To change the programme category, perform

the step 3.

•To disable the PRIORITY PTY function, press

3/P.PTY for at least 2 seconds.

NOTE

In the PRIORITY PTY function, unlike in the T.INFO

function, the volume does not increase during operation.

5Press FUNC to activate the normal mode. The

FUNC indicator will turn off.

Displaying Radio Text

Text messages from a radio station can be

scrolled in the display.

1Tune in a radio station that transmits text

messages.

2Press TITLE to display the Radio Text.

3The display shows "R/T WAIT" for a few seconds.

When the "Scroll Setting" is set to "AUTO" (refer

to page 39), the display scrolls. When set to

"MANUAL," the scrolling is cancelled. It

continues until other operation is performed.

4To cancel the Radio Text mode, press TITLE .

NOTE

If there is no receivable text message or the unit cannot

receive a text message properly, the display shows “No

Radio Text”(monitor) or “NO TEXT” (sub-display).

gff

fFUNC

3/P.PTY

TITLE

https://manual-hub.com/

15-EN

SOURCE/PWR

BAND/TEL.

DAB Operation (Optional)

Using DAB Receiver for the

Ensemble Seek Tuning

DAB (Digital Audio Broadcasting) offers excellent

sound quality even in a moving vehicle, enabling

you to receive various types of information,

including weather and traffic information, and it

also displays information sent from the

broadcasting stations. You can also let urgent

broadcasts or announcements interrupt a current

broadcast.

NOTES

•If you connect the DAB Receiver Box TUA-T100DAB

(separately sold), you can control DAB for the

reception of broadcast.

•CD quality sound can be obtained from DAB

broadcasts, although quality may differ on some

services.

•Some broadcasting stations may perform test

broadcasts.

•When DAB reception is poor, metallic noise may

occur. This is not a malfunction.

1Press SOURCE/PWR to select DAB.

2Press BAND/TEL to select DAB1, DAB2, or

DAB3.

3If you press and hold g or f for at least 2

seconds while receiving DAB1, 2, or 3, it starts

searching for ensemble automatically.

By selecting the mode in the “Changing the

Display Mode” section (page 19), the display

shows the status of the broadcasting stations

that have been received as follows:

Channel No. Display:

The channel numbers of received stations are

displayed.

Ensemble Label Display:

The Ensemble Label of received station is

displayed.

Service Label Display:

The Ensemble Label is displayed for 2 seconds

and then the Service Label is displayed after

receiving the broadcasting station.

Component Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Component Label after receiving the

broadcasting station.

Dynamic Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Dynamic Label after receiving the broadcasting

station.

NOTE

When you use DAB, you can select a desired ensemble

which may contain one or more services, any of which

can be received. Furthermore, each service contains a

Service Component, which itself can contain any number

of Primary or Secondary services, depending on the

Service Component. Several different kinds of service

can therefore be selected.

https://manual-hub.com/

16-EN

DAB Operation (Optional)

Changing the Service

Services are received within the ensemble that

you are currently receiving.

1While receiving the ensemble, momentarily

press g or f, and select the service that

you desire.

The selected service label is displayed for 2

seconds, and then you return to the display that

you select with the steps described under the

section “Changing the Display Mode” (page 19).

Changing the Service Component

You can change Audio Services of the Service

Component between the Primary and Secondary,

when listening to an Audio Service that has a

Secondary Service Component.

1Press FUNC to turn on the “FUNC” indicator.

2Press preset 4 to change the Service

Component between the Primary and Secondary

broadcast.

Every time you press the button the selection

toggles.

The Component label is displayed for 2 seconds,

and then you return to the display that you

selected with the steps described under the

section “Changing the Display Mode” (page 19).

NOTE

If there exists a Secondary Service Component within a

service, the indicator “S” blinks on the display, “P”

indicator lights ON. When receiving the Secondary

Service Component, the indicator “S” remains lit “P”

indicator lights OFF.

Memorizing the Service

1Select the service that you want to memorize.

2Press any one of the preset buttons (1 through

6) for at least 2 seconds while the “FUNC”

indicator light goes out. The selected service is

memorized.

To memorize more, repeat the above steps 1 and 2.

NOTES

•You can memorize up to 18 stations (6 stations for

each band; DAB1, DAB2, DAB3).

•If you select a preset button that has already

memorized a service, the new selection takes it over.

•When you are not receiving DAB, the service is not

memorized. (Memorize the service when the DAB

reception is good.)

Receiving the Memorized Service

1Press BAND/TEL. to select your desired band.

2Press one of the preset buttons (1 through 6).

The selected service is received.

By selecting the mode in the “Changing the

Display Mode” section ( page 19), the display

shows the status of the broadcasting stations

that have been received as follows:

Channel No. Display:

The channel numbers of received stations are

displayed.

Ensemble Label Display:

The Ensemble Label of received station is

displayed.

Service Label Display:

The Ensemble Label is displayed for 2 seconds

and then the Service Label is displayed after

receiving the broadcasting station.

Component Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Component Label after receiving the

broadcasting station.

Dynamic Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Dynamic Label after receiving the broadcasting

station.

NOTE

When you receive the Secondary Service Component, you

memorize the service, but when you call out this

memorized service, the Primary Service Component will

be called out.

gff

fFUNC

2/PTY

BAND/TEL.

Preset buttons

(1 through 6)

T.INFO/

ANNC.

Preset 4

TUNE/A. ME

https://manual-hub.com/

17-EN

Memorizing the Ensemble

Automatically

1Press BAND/TEL. to select the band that you

want to receive.

2Press and hold TUNE/A.ME for at least 2

seconds.

The ensemble is searched for, and six

ensembles are automatically received and

memorized with the preset buttons (1 through 6).

When memorization has completed, the

Ensemble that was memorized last is received.

By selecting the mode in the “Changing the

Display Mode” section (see page 19), the display

shows the status of the broadcasting stations

that have been received as follows:

Channel No. Display:

The channel numbers of received stations are

displayed.

Ensemble Label Display:

The Ensemble Label of received station is

displayed.

Service Label Display:

The Ensemble Label is displayed for 2 seconds

and then the Service Label is displayed after

receiving the broadcasting station.

Component Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Component Label after receiving the

broadcasting station.

Dynamic Label Display:

The Ensemble Label is displayed for 2 seconds,

then the Service Label is displayed for 2

seconds, and then the display is changed to the

Dynamic Label after receiving the broadcasting

station.

NOTE

If no ensemble is received, the one that has been received

before you perform this automatic memorization is

received.

DAB Operation (Optional)

PTY (Programme Type) Tuning

1Press FUNC and the “FUNC” indicator lights.

2During radio (DAB receiving) mode, press

2/PTY to go to the PTY Select mode.

3Press g or f to select your desired

programme type.

4After selecting a programme type, and when the

“FUNC” indicator is lit, press 2/PTY to go to the

PTY Search mode.

The selected programme type is searched for.

NOTE

To cancel the PTY Search mode and return to the PTY

select mode during the PTY search, press 2/PTY, g or

5When the station is received, the received

programme type is displayed for 5 seconds. If no

station is found, “NO PTY” is displayed for 2

seconds.

NOTE

Above functions can be performed only for services

within an ensemble.

Turning ON/OFF Traffic News

Announcement

When you set to ON, you can automatically

receive the Traffic News.

1Press T.INFO/ANNC to set ON/OFF for the

Traffic News.

NOTES

•You can also set the RDS stations at the same time.

•This operation can also be performed by turning the

Traffic News ON/OFF in the “Setting the

Announcement Select Mode” section on page 18.

https://manual-hub.com/

18-EN

Setting the Announcement Select

Mode

1Press T.INFO/ANNC. for at least 2 seconds to

turn ON the Announcement Select mode.

2Press g or f to select “ANNOUN,” and

then press TUNE/A.ME to set it to ON.

3After turning ON the “ANNOUN,” press g or

f to select your desired Announcement.

4Press TUNE/A.ME to set ON/OFF for the

selected Announcement.

Repeat Steps 3 and 4 to set more.

5To set the Announcement Select mode OFF,

press and hold T.INFO/ANNC. for at least 2

seconds.

NOTES

•When one of the selections between ALLSEL (All

Select) and FINANCE (Financial news) is set ON, no

announcement interrupts are made if you set OFF for

the ANNOUN (Announcement).

•If you set ON/OFF with the ALLSEL (All Select)

selection, you can set ON/OFF for the selections from

TRAFFIC (Traffic News) to FINANCE (Financial

news).

•The ON/OFF setting of TRAFFIC (Traffic News) is

reflected in the setting of the “Turning ON/OFF

Traffic News Announcement” section on page 17.

TIPS

•When an urgent broadcast is received, the mode

automatically changes to the DAB mode to receive the

Alarm Announcement. If you adjust the volume level

at this time, that volume level is memorized, and that

volume level is applied the next time you receive an

urgent broadcast.

•If the announcement that you select in Step 3

interrupts, the selected announcement Label is

displayed. If you adjust the volume level at this time,

that volume level is memorized, and that volume level

is applied the next time announcement interrupts.

↓

ANNOUN (Announcement)

↓

ALLSEL (All Select)

↓

TRAFFIC (Traffic News)

↓

TRAVEL (Travel News)

↓

WARNING (Warning)

↓

NEWS (News)

↓

WEATHER (Weather)

↓

EVENT (Event)

↓

SPECIAL (Special Event)

↓

RA INFO (Radio Info)

↓

SPORT N (Sports News)

↓

FINANCE (Financial)

DAB Operation (Optional)

gff

MUTE/

SETUP

Preset 4 T.INFO/

ANNC.

TUNE/

A.ME

TITLE

https://manual-hub.com/

La pagina si sta caricando...

Alpine CVA-1004R Manuale del proprietario

Marca: Alpine

Modello: CVA-1004R

Categoria: Ricevitori multimediali per auto

Tipo: Manuale del proprietario

Scarica PDF

rapporto

in altre lingue

English: Alpine CVA-1004R Owner's manual

Alpine CVA-1004R Manuale del proprietario

Alpine CVA-1004R Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti