SW-Motech KFT.07.664.72000/B Mounting instructions

ANBAUANLEITUNG

mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio

beinhaltet • contains • contient • contiene • contiene

KFT.07.664.72000/B

AKR.00.001.10000/B

KFT.07.664.30001/B

KFT.00.152.35100

ALK.00.733.10000L/B

ALK.00.733.11000R/B

QLS.00.095.15100

www.akrapovic.com

Installation instructions

Akrapovič Exhaust System

for the

Slip-On

BMW R 1250 GS

BMW R 1250 GS Adventure

Revision 1.0

EN

03/2019

*506811*

www.akrapovic.com

2 / 14

Congratulations on purchasing the Akrapovič exhaust system. The Akrapovič exhaust system is a product of

Akrapovič d.d., Malo Hudo 8a, 1295 Ivančna Gorica, Slovenia (“Akrapovič”).

Akrapovič exhaust system should only be installed by persons skilled in motorcycle exhaust system installation

and performance. The instructions provided in this manual should be followed to ensure proper installation

and safe use of the Akrapovič exhaust system. Akrapovič and/or its partners shall not be held liable for any

damage or personal injury (including direct, indirect, or consequential damage) sustained as a result of improper

installation of the Akrapovič exhaust system or its use and maintenance contrary to the instructions and warnings

contained herein.

If you have any questions regarding the installation and/or proper use of the Akrapovič exhaust system or this

manual, please contact your local Akrapovič partner.

For more information on the Akrapovič exhaust systems, see the ofcial Akrapovič website at:

http://www.akrapovic.com

Your safety is our number one priority. Please ride your motorcycle responsibly, safely and always obey local

trafc rules.

All statements made with regard to the exhaust system’s compliance are made in respect of the exhaust system

“as is”. Any modications of the Akrapovič exhaust system or its improper installation, use or maintenance that

is not in accordance with this Installation manual, may result in severe damage to the exhaust system and/ or

engine, as well as personal injury, and may affect the exhaust system’s compliance with the legal requirements,

such as exhaust system’s air and/ or noise emissions (as an example, the motorcycle may not be suitable for

use on public roads any longer), as well as warranty coverage.

The exhaust system may only be used in accordance with relevant laws and regulations, including state and

federal, where applicable.

Damage caused by improper installation, use and maintenance of the Akrapovič exhaust system is not covered

by the Akrapovič warranty. Please refer to the enclosed warranty with regard to the terms of our warranty.

Technical specications of Akrapovič exhaust systems and related products are subject to change without notice.

Please read this entire installation manual carefully prior to installing and using the Akrapovič exhaust

system.

GENERAL INFORMATION

COPYRIGHT AND OTHER RIGHTS NOTICE

The Akrapovič trademark, including corporate logos and emblems, are subject to copyright as well as trademark

rights of Akrapovič, its licensors, or third persons authorizing Akrapovič to use them.

Any reproduction, technical or other manipulation, translation, or other use of the copyright and/or trademark

rights contained herein is prohibited without the explicit prior written consent of Akrapovič. The same especially

applies to the entire contents of this manual and/or any of its parts, including but not limited to technical

specications, instructions, graphs, photographs, and so on included in this manual.

Akrapovič takes all copyright and other rights infringement cases under serious consideration. If you have

any reason to believe that your exhaust system is not an original Akrapovič product, please contact our local

partners or Akrapovič at [email protected].

3 / 14

• THIS MANUAL IS SPECIFIC TO THE MOTORCYCLE INDICATED ON THE COVER PAGE, FOR WHICH IT IS

DESIGNED. INSTALLATION PROCEDURES VARY DEPENDING ON THE TYPE OF MOTORCYCLE. PLEASE

VERIFY THAT THE AKRAPOVIČ EXHAUST SYSTEM AND THIS INSTALLATION MANUAL CORRESPOND

TO THE TYPE OF YOUR MOTORCYCLE.

• THE EXHAUST SYSTEM CAN GET EXTREMELY HOT DURING AND AFTER IT IS USED. MAKE SURE NOT

TO TOUCH THE EXHAUST SYSTEM UNTIL IT IS COMPLETELY COOL. ALLOW THE EXHAUST AND ENGINE

TO COOL DOWN BEFORE BEGINNING INSTALLATION.

• MAKE SURE THE MOTORCYCLE IS SECURELY POSITIONED TO PREVENT TIPPING OVER AND DAMAGE

TO YOURSELF AND OTHERS, OR THE MOTORCYCLE.

• PLEASE CHECK THE PARTS YOU RECEIVED AGAINST THE PARTS LIST AVAILABLE ON OUR WEBSITE

(PLEASE USE THE QR CODE ON THE FRONT PAGE OR LOOK FOR “SCHEMATIC VIEW” IN THE

RESPECTIVE PRODUCT PAGE ON WWW.AKRAPOVIC.COM). MAKE SURE THAT YOU HAVE ALL THE

PARTS NECESSARY FOR THE INSTALLATION OF YOUR NEW AKRAPOVIČ EXHAUST SYSTEM. IF ANY

OF THE PARTS IS MISSING, PLEASE DO NOT PROCEED WITH UNINSTALLING YOUR STOCK EXHAUST

SYSTEM/ INSTALLING THE AKRAPOVIČ EXHAUST SYSTEM AND CONTACT THE RETAILER WHERE YOU

PURCHASED THE AKRAPOVIČ EXHAUST SYSTEM.

• ALWAYS SECURE YOUR MOTORCYCLE’S GROUND CLEARANCE. FOR ADVANCED USERS, WE

RECOMMEND YOU CHECK THE MOTORCYCLE SPRING PRELOAD SETTINGS TO OPTIMIZE GROUND

CLEARANCE WHERE POSSIBLE.

• EVERY EXHAUST SYSTEM MUFFLER HAS ITS UNIQUE SERIAL NUMBER, WHICH IDENTIFIES THE

AUTHENTICITY OF THE PRODUCT. YOU CAN FIND THE SERIAL NUMBER ON THE MUFFLER’S INLET

PIPE. PLEASE REFER TO THE PICTURE BELOW. PLEASE VERIFY THAT YOUR EXHAUST SYSTEM IS

AN ORIGINAL AKRAPOVIČ PRODUCT. IF YOU HAVE ANY DOUBTS, PLEASE CONTACT THE RESELLER

WHERE YOU PURCHASED THE EXHAUST SYSTEM OR AKRAPOVIČ PARTNERS. THIS MANUAL, ANY

CERTIFICATES AND AKRAPOVIČ WARRANTY APPLY TO ORIGINAL PRODUCTS ONLY.

SAFETY AND COMPLIANCE WARNING, PLEASE READ CAREFULLY

BEFORE REMOVING THE STOCK EXHAUST SYSTEM AND BEGINNING THE INSTALLATION OF YOUR

NEW AKRAPOVIČ EXHAUST, PLEASE MAKE SURE THAT ALL ITEMS LISTED BELOW ARE VERIFIED:

SERIAL NUMBER POSITION

YYWWPXXXXX

www.akrapovic.com

4 / 14

NOISE AND EMISSION WARNINGS

General warning

Because of the world-wide distribution of Akrapovič d.d. products, neither Akrapovič d.d. nor any of its subsidiaries

make any representation that the exhaust system complies with the air and/or noise emissions laws, or labeling laws,

of any jurisdiction. The purchasers are entirely responsible for informing themselves of the applicable laws where the

products are to be used and to comply with those law.

Although legal compliance of Akrapovič products in a specic country should be determined by the user, you can

nd some basic guidance on compliance of your Akrapovič exhaust system with various legal requirements on the

product-related part of our website (please use the QR code on the front page or look for the respective product page

on www.akrapovic.com). For EC and ECE type approvals, please refer to the certicate enclosed to your product.

California laws prohibit the use of any aftermarket exhaust part or system that modies, removes or replaces original

equipment catalysts unless the California Air Resources Board has issued an Executive Order regarding such part or

system or unless the part or system is exempted by being used only on racing vehicles on closed courses. Neither

Akrapovic d.d. nor any of their subsidiaries make any representation that any of their parts or systems has received such

an Executive Order or that any of their parts or systems conform with the racing vehicles exemption. The purchasers are

entirely responsible for informing themselves of applicable California laws and to comply with those laws.

Various U.S. states and the U.S. federal government have individual laws regulating the use of aftermarket exhaust

parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts.

Please consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to

ensure compliance with all applicable laws. Neither Akrapovic d.d. nor any of their subsidiaries or the sellers of the parts

or systems make any representation that any of their parts or systems comply with any such laws.

USA WARNING

CALIFORNIA WARNING

CAUTION OR IMPORTANT

HAND TIGHTEN

INSTALLATION TIP

LUBRICATION

TOOLS AND PROTECTIVE

EQUIPMENT REQUIRED

TIGHTENING TORQUE

SYMBOLS

The following symbols are used throughout these installation instructions:

Photographs and other illustrations in this manual are symbolic and are intended to help represent individual steps

for proper installation and use, as well as for a general overview. The actual component parts of the Akrapovič

exhaust system may not entirely correspond to the photographs and other illustrations.

GENERAL NOTE

USE BOLT SEALANT

USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube)

USE ANTI-SEIZING GREASE (white tube)

Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before tightening the

bolts.

WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep

out of reach of children.

Provides trouble-free and long-lasting protection against seizing, corrosion and rusting of bolts,

threaded ends, nuts, joints, etc. Also protects against vibration, wear and impact.

Prevents seizing, corrosion and excessive wear between the titanium components of your exhaust

system.

WARNING! Avoid eye contact. Keep out of reach of children.

5 / 14

Tools & equipment

The following parts should be found in the box:

• Installation Manual

• Homologation certicate/ compliance documents if applicable

• Warranty

• Fitting material

• Mufer and pipes

Detailed list of parts can be found on the Akrapovič website (please use the QR code on the front page or look for

“Schematic view” in the respective product page on www.akrapovic.com).

PARTS LIST

• Torx 25 wrench

• Torx 40 wrench

• Torx 45 wrench

• T-handle 13 mm wrench

REMOVAL OF STOCK EXHAUST SYSTEM:

The process of uninstalling the original exhaust system may vary depending on the existing exhaust system.

Please follow the original exhaust system manufacturer’s instructions for uninstalling the original exhaust system.

If you for any reason decide otherwise, please note that any information provided in this respect herein should

be considered as general information provided for your convenience only. Akrapovič shall not assume any

liability or responsibility with regard to uninstalling your existing exhaust system, warranty coverage of such

exhaust system or vehicle or their further tness for use.

In case your Akrapovič exhaust system may not be used on certain roads or under certain conditions,

please keep the stock or other exhaust system that you can use in such circumstances legally.

www.akrapovic.com

6 / 14

F 01

F 02

1.

2.

Unscrew the marked mufer’s bracket bolt and carefully remove the stock mufer off the motorcycle (F 02).

IMPORTANT: support the mufer during this process!

IMPORTANT:

be careful

not to damage any part of the motorcycle during this process!

3.

Put the motorcycle on a central stand, we recommend a additional racing stand. Make sure, that surface is solid

and at.

Unscrew the marked heat shield’s bolt and loosen the metal clamp at the mufer - collector joint (F 01).

CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!

REMOVAL OF STOCK EXHAUST SYSTEM:

7 / 14

F 03

F 04

Insert the sleeve from Akrapovič installation kit, into the rubber mufer’s bracket, as shown (F 04). 2.

INSTALLATION OF THE AKRAPOVIČ EXHAUST SYSTEM:

1. Assemble the clamp from Akrapovič installation kit onto the mufer’s inlet pipe, as shown (F 03).

CAUTION: be careful not to damage the mufer during this procedure!

www.akrapovic.com

8 / 14

F 05

F 06

Slide the heat shield onto the stock collector and hand tighten the marked bolt (F 06).

IMPORTANT: do not fully tighten the heat shield’s clamp or bolt yet!

IMPORTANT:

be careful

not to damage any part of the motorcycle during this process!

4.

Assemble the bolt and heat resistant washers from Akrapovic installation kit, onto the carbon ber heat shield, as shown

(F 05).

INSTALLATION TIP: screw the heat resistant washers onto the bolt; do not try to push them on!

IMPORTANT: make sure, that heat shield’s clamp is completely loosened!

3.

9 / 14

F 07

F 08

Attach the aluminium washer from Akrapovič installation kit to the sleeve and rotate both, till bolt hole aligns with

sub frame thread (F 08).

IMPORTANT:

make sure to join aluminium washer and rubber bracket’s inner sleeve correctly

!

6.

5. Carefully slide the mufer onto the stock collector’s outlet (F 07).

IMPORTANT:

be careful

not to damage the exhaust system or any other part of the motorcycle during this

process!

www.akrapovic.com

10 / 14

F 09

F 10

STOCK BOLT

Akr. washer

22Nm

16ftlb

14Nm

10ftlb

7. Align the mufer in respect to the motorcycle and tighten the mufer’s bracket to the sub frame (using stock bolt and

Alu washer from Akrapovič installation kit) and mufer’s inlet pipe clamp (F 09, 10).

IMPORTANT:

be careful

not to damage any part of the motorcycle during this process!

11 / 14

F 11

F 12

4.9Nm

3.6ftlb

2.1Nm

1.5ftlb

8. Align the heat shield in respect to the mufer’s inlet pipe and stock exhaust valve’s cover. Tighten the heat shield’s

bolt and clamp to the specied torques (F 11, 12).

IMPORTANT: before tightening the bolt and clamp, make sure you adjust the heat shield in such a way, that

it doesn’t touch the pipe or any other part of the motorcycle!

www.akrapovic.com

12 / 14

FINAL INSTALLATION AND MAINTENANCE:

Clean grease spots off all exhaust system surfaces, when installation is nished. Cleaning will prevent spots

from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage the surface

or sticker.

1. Mufer – titanium outer sleeve: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40® or

equivalent)*.

2. Mufer – carbon-ber outer sleeve: use a soft dry cloth sprayed with all purpose foam cleaner, then wipe

with a soft dry cloth.

3. Mufer – carbon-ber outlet cap: use a soft dry cloth sprayed with all purpose foam cleaner, then wipe with

a soft dry cloth.

4. Painted mufers and parts – use a soft cloth sprayed with all purpose foam cleaner, then wipe with a soft

dry cloth.

5. Chrome plated mufers and parts: use a soft cloth sprayed with all purpose foam cleaner, then wipe with a

soft dry cloth.

6. Stainless steel pipes: use a soft cloth sprayed with a contact cleaner, then wipe with a soft dry cloth.

7. Titanium pipes: use a soft cloth sprayed with a multi-purpose spray lubricant (WD-40® or equivalent)*.

IMPORTANT: make sure all the bolts are sufciently tightened. In case the exhaust system

touches the cowling or other parts repeat the adjustment of the exhaust system or contact your

authorized dealer!

CAUTION: after running engine for 30 minutes, retighten the bolts of the Akrapovič carbon-ber

heat shield!

INSTALLATION TIP: IT IS NORMAL IF WHITE SMOKE COMES OUT OF THE MUFFLER DURING

THE FIRST 100 KM AFTER REPLACEMENT.

INSTALLATION TIP: A CHANGE IN THE COLOR OF THE EXHAUST SYSTEM IS NORMAL DUE TO

THE HIGH TEMPERATURES.

CAUTION: DO NOT STAND BEHIND THE MUFFLER AT ANY TIME.

IMPORTANT: DO NOT USE AUTOMOTIVE WHEEL CLEANERS OR ANY CLEANING PRODUCTS

WHICH CONTAIN ACIDIC ADDITIVES TO CLEAN AKRAPOVIČ EXHAUST SYSTEMS.

Periodically make sure all the bolts and springs are sufciently tight.

*WD-40® is a trademark of the WD-40 Company.

13 / 14

TROUBLESHOOTING:

Problem Possible cause Solution

Exhaust gas leaks out of the

mufer/pipe clamp connections

loosened clamp tighten the clamp to specied

torque

connection is not completely

joined

tap the connection into place and

tighten the clamp to specied

torque

www.akrapovic.com

Version 1.0 12/2017

Akrapovič-Auspuffanlage Slip-On

Impianto di scarico Akrapovič Slip-On

Système d‘échappement d‘Akrapovič Slip-On

Sistema de escape Akrapovič Slip-On

Sistema de Escape Akrapovič Slip-On

Izpušni sistem Akrapovič Slip-On

Einbauanleitung

Istruzioni per il montaggio

Instructions d‘installation

Instrucciones de montaje

Instruções de montagem

Navodila za namestitev

DE

IT

FR

ES

PT

SI

BMW R 1250 GS

BMW R 1250 GS Adventure

*506812*

www.akrapovic.com

Einbauanleitung

Akrapovič-Auspuffanlage

für

Slip-On

BMW R1200GS

Version 1.0

DE

12/2017

www.akrapovic.com

4 / 62

Herzlichen Glückwunsch zum Kauf Ihrer Akrapovič-Auspuffanlage. Die Akrapovič-Auspuffanlage ist ein Produkt

von Akrapovič d.d., Malo Hudo 8a, 1295 Ivančna Gorica, Slowenien („Akrapovič”).

Bitte lesen Sie die gesamte Einbauanleitung sorgfältig, bevor Sie die Akrapovič-Auspuffanlage einbauen

und nutzen.

Die Akrapovič-Auspuffanlage sollte nur von Personen eingebaut werden, die sich mit dem Einbau von

Auspuffanlagen in Motorräder und deren Eigenschaften auskennen. Die in dieser Anleitung gegebenen

Anweisungen sollten befolgt werden, um einen ordnungsgemäßen Einbau und eine sichere Nutzung der

Akrapovič-Auspuffanlage sicherzustellen. Akrapovič und/oder ihre Partner haften nicht für Sach- oder

Personenschäden (einschließlich direkter, indirekter oder Folgeschäden), die infolge eines fehlerhaften Einbaus

der Akrapovič-Auspuffanlage oder ihrer Nutzung und Wartung entgegen den hierin enthaltenen Anweisungen

und Warnungen auftreten.

Sollten Sie Fragen bezüglich des Einbaus und/oder der ordnungsgemäßen Nutzung der Akrapovič-Auspuffanlage

oder dieser Anleitung haben, wenden Sie sich bitte an Ihren Akrapovič-Partner vor Ort.

Weitere Informationen über die Akrapovič-Auspuffanlagen nden Sie auf der ofziellen Website von Akrapovič

unter: http://www.akrapovic.com

ALLGEMEINE INFORMATIONEN

Ihre Sicherheit hat für uns oberste Priorität. Bitte fahren Sie Ihr Motorrad verantwortungsvoll, sicher und halten

Sie sich stets an die örtlichen Verkehrsregeln.

Alle Aussagen hinsichtlich der Übereinstimmung der Auspuffanlage mit den gesetzlichen Vorschriften

beziehen sich auf die Auspuffanlage „wie geliefert“. Jegliche Veränderungen an der Akrapovič-Auspuffanlage

oder ein unsachgemäßer Einbau, eine unsachgemäße Verwendung oder Wartung der Anlage abweichend

von dieser Einbauanleitung können zu schweren Schäden an der Auspuffanlage und/oder am Motor sowie

zu Personenschäden führen und können die Übereinstimmung der Auspuffanlage mit den gesetzlichen

Erfordernissen beeinussen, wie zum Beispiel die Luft- und Lärmemissionen der Auspuffanlage (so ist das

Fahrzeug dann beispielsweise nicht mehr für die Nutzung auf öffentlichen Straßen geeignet), sowie den

Garantieumfang.

Die Auspuffanlage darf nur im Einklang mit allen geltenden Gesetzen und Vorschriften genutzt werden,

einschließlich gegebenenfalls Staats- und Bundesgesetzen.

Schäden, die durch einen unsachgemäßen Einbau, eine unsachgemäße Verwendung und Wartung der

Akrapovič-Auspuffanlage entstehen, sind nicht durch die Garantie von Akrapovič gedeckt. Bitte beachten Sie

sich in Bezug auf unsere Garantiebedingungen den beiliegenden Garantieschein.

Die technischen Spezikationen von Akrapovič-Auspuffanlagen und zugehörigen Produkten können ohne

vorherige Ankündigung geändert werden.

URHEBERRECHT UND ANDERE RECHTLICHE HINWEISE

Die Marke Akrapovič einschließlich der Firmenlogos und -embleme unterliegt dem Urheberrecht sowie den

Markenschutzrechten von Akrapovič, den Lizenznehmern des Unternehmens und Dritten, die Akrapovič die

Nutzung genehmigen.

Jede Reproduktion, technische oder sonstige Manipulation, Übersetzung oder sonstige Nutzung der hierin

enthaltenen Urheber- und/oder Markenschutzrechte ohne die vorherige ausdrückliche schriftliche Genehmigung

von Akrapovič ist untersagt. Das gleiche gilt insbesondere für den gesamten Inhalt dieser Anleitung und/oder für

Teile davon, einschließlich, jedoch nicht beschränkt auf technische Spezikationen, Anweisungen, Diagramme,

Fotos und so weiter, die in dieser Anleitung enthalten sind.

Akrapovič unterzieht alle Fälle von Verstößen gegen Urheber- und andere Rechte einer eingehenden Prüfung.

Sollten Sie Grund zu der Annahme haben, dass es sich bei Ihrer Auspuffanlage nicht um ein Originalprodukt von

Akrapovič handelt, wenden Sie sich bitte an unsere Partner vor Ort oder an Akrapovič unter info@akrapovic.

com.

La pagina si sta caricando...

SW-Motech KFT.07.664.72000/B Mounting instructions

SW-Motech KFT.07.664.72000/B Mounting instructions

in altre lingue

Altri documenti