Hitachi DZMV780MA Manuale utente

English

DZ-GX20MA/DZ-MV780MA

DZ-MV750MA/DZ-BX31A

Instruction Manual

DVD-RAM DVD-RW

DVD-R

English

Instruction manual

To obtain the best performance and ensure years of

trouble-free use, please read this instruction

manual completely.

Mode d’emploi

Des performances optimales et un fonctionnement

à long terme seront assurés en appliquant les

présentes instructions après avoir entièrement lu

ce mode d’emploi.

Manual de instrucciones

Para obtener el mejor funcionamiento y asegurar

muchos años de utilización exentade problemas,

lea todo este manual de instrucciones.

DZ-GX20MA DZ-MV750MA

DZ-BX31A

DZ-MV780MA

English

2

Important Information

For Your Safety

The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the

camera/recorder is to be left unattended for a long period of time, turn it off.

The DVD video camera/recorder and AC

adapter/charger have the following caution

marks.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Identifications of caution marks

Precautions

WARNING: Many television programs and films

are copyrighted. In certain circumstances, copy-

right law may apply to private in-home

videotaping of copyrighted materials.

This Class B digital apparatus complies with

Canadian ICES-003.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

BE SURE TO USE THE SPECIFIED AC ADAPTER/

CHARGER (DZ-ACS2).

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol warns the user that

uninsulated voltage within the unit

may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous

to make any kind of contact with any

inside part of this unit.

This symbol alerts the user that

important literature concerning the

operation and maintenance of this unit

has been included. Therefore, it should

be read carefully to avoid any

problems.

The liquid crystal display (LCD) panel is

made by highly precise technology. More than

99.99% of its picture elements (pixels) are

effective, but some (less than 0.01%) may

appear as colored bright dots. This does not

indicate a fault as the LCD panel stretches the

limits of current technology.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain

access to the inside of the product. Refer all

servicing to qualified personnel.

English

3

Microsoft

®

, Windows

®

, Windows

®

Me, Windows

®

2000 Professional, and Windows

®

XP are

registered trademarks of Microsoft Corporation.

Intel

®

, Pentium

®

Processor, and Celeron

®

Processor are registered trademarks of Intel Corporation.

IBM

®

and PC/AT

®

are registered trademarks of International Business Machines Corporation.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each

individual company.

SD logo is a trademark.

Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution to the user: Changes or modifications not expressly approved by the manufacturer void

the user’s authority to operate the equipment.

English

4

IMPORTANT SAFETY INSTRUCTIONS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a

major factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/

recorder and accessory equipment.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

10 Only use attachments/accessories specified by the

manufacturer.

11 Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

12 Unplug this apparatus during lightning storms or

when unused for long periods of time.

13 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

14 The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

15 The equipment (AC Adapter/Charger) shall be

used near the socket-outlet and shall be easily

accessible.

English

5

Cautions When Using

Handle the liquid crystal display (LCD) with care:

• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with

a sharp object.

• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear

soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.

• Do not place the DVD video camera/recorder with the open LCD screen down.

• Close the LCD monitor when not using the DVD video camera/recorder.

Liquid crystal display (LCD) and viewfinder:

• The LCD screen and viewfinder are the products of highly precise technology. Among the total

number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels

for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as colored dots

(red, blue, green). This shows the limitations of the current technology, and does not indicate a

fault that will interfere with recording.

• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/

recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal

brightness will be restored when the temperature inside the DVD video camera/recorder rises.

Hold the DVD video camera/recorder correctly:

• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The

viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.

Do not subject the DVD video camera/recorder to impact:

• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it

against a hard object or let it fall.

• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD

video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.

No sand or dust!

• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause

malfunctions or defects.

No water or oil!

• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric

shock, malfunctions or defects.

English

6

Heat on surface of product:

• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly

warm, but this does not indicate a fault.

Screen on connected TV:

• Never leave the disc navigation screen, still image or camera image displayed on your TV to which

the DVD video camera/recorder is connected: Doing so could result in displayed image retention

or phosphor degradation of TV screen.

Be careful of ambient temperature:

• Using the DVD video camera/recorder in a place where the temperature is over 104ºF (40ºC) or

under 32ºF (0ºC) will result in abnormal recording/playback.

• Take care that the temperature of this DVD video camera/recorder, when connected to PC does

not rise excessively (reference for usage: approx. 30 minutes at about 86ºF (30ºC)).

• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the

temperature is very high for a long time: This could cause malfunctions.

Do not point directly at the sun:

• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction

or a fire could occur.

• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This

could cause malfunctions.

Do not use the DVD video camera/recorder near TV or radio:

• This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD video camera/recorder near strong radio waves or magnetism:

• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a

radio wave tower or electric appliances, noise could enter video and audio that are being recorded.

During playback of normally recorded video and audio, noise may also be present in picture and

sound.

At worst the DVD video camera/recorder could malfunction.

Do not expose the DVD video camera/recorder to soot or steam:

• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.

Do not use the DVD video camera/recorder near corrosive gas:

• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated

by gasoline or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot

spring area, the external or internal terminals could corrode, which would disable normal

operation, or the battery connecting terminals could corrode, so power will not turn on.

Do not use the DVD video camera/recorder near ultrasonic humidifier:

• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the

air, and white particles could adhere to the optical head of the DVD video camera/recorder, which

could cause it to operate abnormally.

Do not expose the DVD video camera/recorder to insecticide:

• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,

and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD

video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.

Do not use a generally available 8 cm CD lens cleaner:

• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.

• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.

• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.

English

7

Be careful of moisture condensation:

• When you move the DVD video camera/recorder between places where the difference in

temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or

vehicle – condensation (vapor in air warmed or cooled to water droplets) could occur on the lens

and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of

disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,

dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may

remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2

hours before using it again.

Do not use the DVD video camera/recorder for a long uninterrupted period of time:

• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance

camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video

camera/recorder could exceed the limit and the recording/playback operation may slow down or

other faults could occur. If this happens, turn it off and wait for a while before using it again.

Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or

CARD ACCESS indicator is lit or blinking:

• The ACCESS/PC or CARD ACCESS indicator is lit or

blinking to show that data is being written to disc or card,

or being read from it. At this time, do not do any of the

following, so as not to damage the data:

− Remove battery

− Disconnect AC adapter/charger

− Plug or unplug PC connection cable

− Remove disc or card

− Subject DVD video camera/recorder to severe

vibrations or impact.

− Violently open or close the LCD monitor

The ACCESS/PC indicator will light for a while after

recording is finished. While it is lit, do not subject the DVD

video camera/recorder to any vibration or impact, and do

not disconnect the battery or AC adapter/charger.

If you turn the DVD video camera/recorder off while the

ACCESS/PC or CARD ACCESS indicator is lit or blinking,

turn it on again with the disc or card loaded in it: Repair of

the disc or card will be executed automatically (see page 171).

Do not wipe the DVD video camera/recorder case with benzene or thinner:

• The coating of case could peel off or the case surface could deteriorate.

• When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

The battery provided has not been charged at time of purchase:

• Charge it before using the DVD video camera/recorder (see page 40).

• The battery will discharge as time passes. (The battery is produced so that it discharges on its own

in order to protect its characteristics.)

Disc cannot be inserted or removed unless a charged battery or AC adapter/

charger is connected to the DVD video camera/recorder.

Be sure to set the power switch to “OFF” when turning the DVD video camera/

recorder off:

• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being

powered could cause a fault.

ACCESS/PC

indicator

CARD ACCESS indicator

English

8

Cautions When Storing

Do not leave the DVD video camera/recorder in a place where the temperature is

very high for a long period of time:

• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave

the DVD video camera/recorder in such a place, it could malfunction or the case could be

damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a

heater.

Do not store the DVD video camera/recorder in a place where the humidity is high

or in a dusty place:

• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,

the lens could be moldy, and the DVD video camera/recorder could become inoperable. It is

recommended that you put the DVD video camera/recorder with desiccant in a box when storing

it in a closet, etc.

Do not store the DVD video camera/recorder in a place subject to strong

magnetism or intense vibrations:

• This could cause malfunctions.

Detach the battery from the DVD video camera/recorder and store it in a cool place:

• Leaving the battery attached or storing it at high temperature could shorten its life.

Suggestions and Restrictions

Make a trial recording:

• Always make a trial recording before doing actual recording to make sure that recording is normal.

The data that have not been stored normally because of a defect in the DVD video camera/

recorder cannot be restored.

It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for

trial recording.

Do not use the DVD video camera/recorder for professional applications:

• This DVD video camera/recorder is designed and produced for home-use recording and playback.

The recorded contents cannot be compensated for:

• Hitachi cannot compensate for any damages caused when recording is not made normally or

recorded contents cannot be played back because of a defect in the DVD video camera/recorder,

disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.

• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card,

etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due

to loss of recorded contents.

Copyright:

• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog

media or devices are protected by the copyright act and cannot be used without permission of the

owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some

demonstrations, performances and exhibitions, even for personal enjoyment.

English

9

Read This First

To guide you, we have included following six chapters.

• The section on “Setups” explains how to set

up the DVD video camera/recorder, battery,

and set the date/time.

• The section on “Basic Techniques” explains the

basic operation of this DVD video camera/

recorder – recording of movies, still images,

external input, and playback of recorded

images.

• The section on “Advanced Techniques”

explains settings on this DVD video camera/

recorder for more advanced usage.

• The section on “Disc Navigation” explains

editing with Disc Navigation: Refer to this

section when finalizing DVD-RW/DVD-R disc

and initializing DVD-RAM/DVD-RW disc.

• The section on “Connecting to PC” explains

the contents of provided CD-ROM and how to

install the software included.

• “Subsidiary Information” includes an

introduction to products sold separately,

proper cleaning, and troubleshooting.

We want this manual to be as helpful as

possible, so it includes two easy ways to find the

information you need:

• A quick index for the information you use

most often (this page).

• A detailed table of contents directing you to

specific information quickly (see pages 12 –

14).

Get to know your DVD video camera/recorder by

using this manual, and get to know Hitachi. We

appreciate your business.

Quick Index

Available Discs ................................................ 25

Recording Movie ............................................. 50

Playing Back.................................................... 59

Connecting to a TV.......................................... 80

Functions Available with Disc Navigation ...... 110

Connecting to PC .......................................... 141

About This Manual

●Displays in this manual

Understand that the displays are different from those you will actually see in the viewfinder or on

the LCD screen.

●Notation of cancel button

Press the stop/cancel button to stop your operation midway, or return the menu screen to the

preceding one. The expression “press the C button” will be used in this text.

●1, <, >, 2 and 3 marks beside headings

Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to

the marks at right above each function to identify whether the disc or card is compatible with the

function. Refer to these marks and identify the functions and operation to match the disc or card you

use.

●Illustrations in this manual

Although the external appearances of DZ-GX20MA, DZ-MV780MA, DZ-MV750MA and DZ-BX31A

are different, the method of operating these models is identical.

The illustrations of DZ-GX20MA are used for the explanation in this text.

With this DVD video camera/recorder you can view the picture being recorded or the playback

picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor

switches the picture to appear on the LCD monitor or in the viewfinder.

It is possible to switch the language in the on-screen display of this DVD video camera/recorder

(see page 104).

English

10

Introduction

●You can start recording immediately after stopping playback (p. 50, 59)

Unlike tape devices, you do not need to search for the recording start position or locate the

beginning of blank portion.

You can stop playback and immediately start recording: New recording will not overwrite any

previously recorded data.

●You can immediately play back desired recorded scenes (p. 108)

You do not need to rewind, unlike recorders using tape.

You can select any scene you want and immediately play it back (using Disc Navigation function).

●Use Disc Navigation to create your original movie (p. 127)

You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play

List).

If you stop playback midway and start recording, overwrite will not occur.

Recorded scenes

Before editing

After editing

English

11

●You can easily edit scenes, which

is quite difficult with tape (p. 86)

Using this DVD video camera/recorder, you can

collect scenes of your child, for example, on play

list of Disc Navigation function and create an

original movie: Then simply play back the play

list and dub it on VCR or DVD recorder.

●Create original DVDs on PC

(p. 150)

You can create an original DVD, using the

provided software CD-ROM.

The created DVD disc can be played back on

DVD player/recorder, DVD-ROM drive, etc.

Up to now, you had to

repeatedly press

buttons

With a DVD, you can

simply play it back on this

DVD video camera/

recorder: Press the record

button on VCR or DVD

recorder.

Original DVD being

created

Playback of DVD

English

12

Table of Contents

Important Information......................................... 2

For Your Safety.................................................. 2

Precautions........................................................ 2

IMPORTANT SAFETY INSTRUCTIONS...........4

Cautions When Using........................................ 5

Cautions When Storing...................................... 8

Suggestions and Restrictions ............................ 8

Read This First .................................................. 9

About This Manual............................................. 9

Introduction...................................................... 10

Table of Contents ............................................ 12

Checking Provided Accessories ...................... 15

Names of Parts................................................16

Try Recording and Playing Back using Disc

(Video and Photo) ......................................... 20

Try Recording and Playing Back using Card

(Photo) .......................................................... 22

Discs and Cards .............................................. 24

AVAILABLE DISCS ............................................. 25

INFORMATION ON DVD-R DISC ....................... 25

EXAMPLES OF DISCS THAT CANNOT BE

USED ON THIS DVD VIDEO CAMERA/

RECORDER: .................................................... 26

HANDLING DISCS .............................................. 27

DISC CLEANING.................................................27

AVAILABLE CARDS............................................28

COMMON CAUTIONS FOR DISC AND CARD .......28

Storage Capacity on Disc or Card ................... 29

RECORDABLE TIME OF MOVIE (VIDEO) ......... 29

RECORDABLE STILLS (PHOTOS) ON

DVD-RAM......................................................... 29

RECORDABLE STILLS (PHOTOS) ON

CARD................................................................ 30

SIZE AND QUALITY OF PHOTOS .....................31

Setups

Setting Up the DVD Video Camera/

Recorder ....................................................... 32

HOLDING DVD VIDEO CAMERA/

RECORDER ..................................................... 32

ATTACHING SHOULDER STRAP...................... 33

ATTACHING LENS CAP ..................................... 33

INSERTING BATTERY INTO REMOTE

CONTROL ........................................................ 34

REMOVING BATTERY FROM REMOTE

CONTROL ........................................................ 34

VIEWING IMAGE ON LCD MONITOR

SCREEN........................................................... 36

CLOSING LCD MONITOR .................................. 37

VIEWING SUBJECT THROUGH

VIEWFINDER ................................................... 37

SETTING DATE AND TIME ................................ 38

CHANGING DISPLAY FORMAT OF DATE

AND TIME.........................................................39

Setting Up the Battery......................................40

CHARGING BATTERY........................................40

ATTACHING BATTERY TO DVD VIDEO

CAMERA/RECORDER.....................................41

REMOVING BATTERY........................................41

BATTERY REMAINING LEVEL INDICATOR......43

EFFICIENT USE OF BATTERY ..........................43

USING DVD VIDEO CAMERA/RECORDER WITH

AC ADAPTER/CHARGER................................44

Turning DVD Video Camera/Recorder On

and Off...........................................................45

Inserting and Removing Disc...........................46

INSERTING DISC................................................46

REMOVING DISC................................................48

Inserting and Removing Card ..........................49

Basic Techniques

Recording Movie..............................................50

Recording Stills................................................52

On-Screen Information ....................................53

INFORMATION DISPLAY DURING

RECORDING....................................................53

Zooming...........................................................57

MACRO RECORDING ........................................58

RECORDING SUBJECTS FOR STRONGER

WIDE-ANGLE OR TELEPHOTO EFFECT.......58

Playing Back ....................................................59

PLAYING BACK ..................................................59

PLAYBACK FROM START OF DISC OR

CARD................................................................60

SEARCH PLAYBACK OF MOVIE .......................60

FRAME ADVANCE/FRAME BACK/SLOW

PLAYBACK OF MOVIE ....................................60

SKIP PLAYBACK OF MOVIE..............................61

PLAYING BACK STILLS .....................................61

JUMPING TO SPECIFIED POINT (GO TO)........62

On-Screen Information Display........................63

INFORMATION DISPLAY DURING

PLAYBACK.......................................................63

Checking Flow of Quick Menu .........................64

Camera Functions

FLOW OF QUICK MENU WHEN RECORDING

MOVIE: .............................................................66

FLOW OF QUICK MENU WHEN RECORDING

PHOTO (DISC): ................................................67

FLOW OF QUICK MENU WHEN RECORDING

PHOTO (CARD): ..............................................69

Disc Navigation Functions

FLOW OF QUICK MENU

(WITH DVD-RAM DISC):..................................71

FLOW OF QUICK MENU

(WITH DVD-RW DISC):....................................72

English

13

FLOW OF QUICK MENU

(WITH DVD-R DISC): ....................................... 73

FLOW OF QUICK MENU (WITH CARD):............ 74

Manually Focusing Subject ..............................75

FOCUSING DURING RECORDING.................... 75

Adjusting Brightness of Image to be recorded

(Exposure) .....................................................77

Compensating for Backlight .............................77

Using External Microphone..............................78

Built-in Video Flash (for DZ-GX20MA only) .....79

Viewing on TV Screen......................................80

CONNECTING TO A TV......................................80

VIEWING ON TV SCREEN ................................. 81

Playback on DVD Recorder/Player..................82

PLAYING BACK

DVD-RAM/DVD-RW (VR-mode) DISC .............82

PLAYING BACK

DVD-RW (VF-mode)/DVD-R DISC................... 82

Recording (Dubbing) Images ...........................83

RECORDING (DUBBING) IMAGES FROM

OTHER VIDEO DEVICE................................... 83

RECORDING (DUBBING) IMAGES FROM

OTHER VIDEO CAMERAS .............................. 85

RECORDING (DUBBING) IMAGES ON

OTHER VIDEO DEVICES ................................ 86

Advanced Techniques

Checking Flow of Normal Menu .......................87

Camera Functions

Setting Up Camera Functions ..........................89

SELECTING SHOOTING MODE TO MATCH

THE SUBJECT

(SWITCHING PROGRAM AE MODE)..............89

RECORDING DARK SUBJECTS USING LCD

MONITOR LIGHT .............................................90

ADJUSTING COLOR (WHITE BALANCE).......... 91

USING THE ELECTRONIC IMAGE

STABILIZER (EIS)............................................ 93

RECORDING SUBJECT USING LARGE

MAGNIFICATION (DIGITAL ZOOM) ................93

REDUCING WIND NOISE DURING

RECORDING (MIC.FILTER) ............................ 93

Setting Up Record Functions ...........................94

SWITCHING MOVIE QUALITY

(VIDEO MODE) ................................................ 94

SETTING TO WIDE TV SCREEN MODE

(16:9 MODE)..................................................... 95

SWITCHING QUALITY OF STILL IMAGE

(QUALITY)........................................................ 97

RECEIVING IMAGE FROM ANOTHER DEVICE

(INPUT SOURCE) ............................................ 97

SWITCHING EXTERNAL INPUT RECORDING

METHOD (PHOTO INPUT) ..............................98

SELF-TIMER .......................................................99

SETTING ON-SCREEN DISPLAY OUTPUT

ON OR OFF (OSD OUTPUT)......................... 100

LCD/EVF Setup..............................................101

SETTING BRIGHTNESS OF LCD SCREEN

(LCD BRIGHTNESS)......................................101

SETTING BRIGHTNESS OF VIEWFINDER

(EVF BRIGHTNESS) ......................................101

SETTING COLOR DENSITY

(COLOR LEVEL).............................................102

ALWAYS DISPLAYING IMAGE IN

VIEWFINDER .................................................102

Initial Settings................................................ 103

SWITCHING OPERATING SOUND ON OR

OFF (BEEP)....................................................103

TURNING DVD VIDEO CAMERA/RECORDER

OFF AUTOMATICALLY (POWER SAVE) ......103

TURNING RECORD LED ON OR OFF

(RECORD LED)..............................................104

CHANGING DISPLAY LANGUAGE

(LANGUAGE)..................................................104

RESETTING MENU SETTINGS TO

DEFAULTS (RESET)......................................105

Disc Navigation

Using Disc Navigation ................................... 106

STARTING OR TERMINATING DISC

NAVIGATION..................................................106

PLAYING BACK FROM DISC NAVIGATION

SCREEN.........................................................108

SELECTING MULTIPLE SCENES ....................109

SELECTING CONSECUTIVE SCENES

TOGETHER....................................................109

FUNCTIONS AVAILABLE WITH DISC

NAVIGATION..................................................110

UNDERSTANDING FLOW OF DISC

NAVIGATION MENU ......................................111

Scene ............................................................ 113

DELETING SCENES (EDIT – DELETE) ...........113

DIVIDING MOVIES (EDIT – DIVIDE) ................115

COMBINING MULTIPLE SCENES

(EDIT – COMBINE).........................................116

ARRANGING ORDER OF SCENES

(EDIT – MOVE)...............................................116

DIRECTING SCENES EFFECTIVELY

(EFFECT – FADE)..........................................117

PLAYING BACK BY SKIPPING SCENES

(EFFECT – SKIP) ...........................................118

CHANGING IMAGES FOR THUMBNAILS

(EFFECT – THUMBNAIL)...............................119

COPYING STILLS ON DVD-RAM DISC TO

CARD (COPY) ................................................120

LOCKING SCENES ON CARD (LOCK) ............121

SELECTING SCENES USING MENU SCREEN

(SELECT)........................................................122

DISPLAYING INFORMATION USING MENU

SCREEN (DETAIL).........................................123

Program......................................................... 124

WHAT IS “PROGRAM”?....................................124

SWITCHING TO THUMBNAIL DISPLAY OF

SPECIFIC DATE (SWITCH) ...........................124

PLAYING BACK PROGRAM (PLAY) ................125

CHANGING TITLE OF PROGRAM (TITLE)......125

Play List......................................................... 127

WHAT IS “PLAY LIST”?.....................................127

CREATING NEW PLAY LIST (CREATE) ..........127

English

14

SWITCHING TO DISPLAY OF EACH PLAY LIST

(SWITCH) ....................................................... 128

PLAYING BACK A PLAY LIST (PLAY) ............. 128

ADDING SCENES TO PLAY LIST

(EDITING PLAY LIST).................................... 129

DELETING SCENES FROM PLAY LIST

(EDITING PLAY LIST).................................... 130

ADDING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) .................... 130

DELETING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) .................... 131

SELECTING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) .................... 131

ARRANGING ORDER OF SCENES (MOVE) ... 132

CHANGING TITLE OF PLAY LIST (TITLE) ...... 133

DELETING PLAY LIST (DELETE) .................... 133

Go To............................................................. 134

TOP (END) ........................................................ 134

Disc or Card Management............................. 135

INITIALIZING DISC OR CARD

(FORMAT DISC. FORMAT CARD) ................ 135

PROTECTING DISC FROM WRITING

(PROTECT DISC)........................................... 136

VERIFYING REMAINING FREE SPACE ON

DISC OR CARD (CAPACITY) ........................ 136

UPDATING CONTROL INFORMATION OF

DVD-RAM/DVD-RW (VR-mode) DISC

(UPDATE CONTROL INFO.).......................... 137

FINALIZING DVD-RW/DVD-R DISC

(FINALIZE DISC)............................................ 138

Others............................................................ 139

DISPLAYING MOVIES OR STILLS

INDEPENDENTLY (CATEGORY).................. 139

PLAYING BACK SCENES REPEATEDLY

(REPEAT PLAY)............................................. 139

SLIDE SHOW

(CONTINUOUS PLAYBACK OF STILLS) ...... 140

Connecting to PC

THE FOLLOWING ARE AVAILABLE WHEN

CONNECTING TO PC.................................... 141

To Copy Still Data on PC............................... 143

Contents on Provided CD-ROM .................... 143

Installing Software ......................................... 145

DISPLAYING INSTALLER SCREEN ................ 145

INSTALLING SOFTWARE ................................ 146

Creating DVD Video (DVD-RW/DVD-R) from

DVD-RAM/DVD-RW (VR-mode) Disc

Recorded on DVD Video Camera/

Recorder ..................................................... 150

INSERTING 3D TITLE IMAGES........................152

CREATING A DVD VIDEO (DVD-RW/DVD-R)

USING SCENES RECORDED ON MULTIPLE

DVD-RAM/DVD-RW (VR-MODE) DISCS....... 154

CAPTURING SCENES ON DVD-RAM/DVD-RW

(VR-MODE) INTO PC..................................... 156

DVD-MovieAlbumSE HDD MODE..................... 158

REUSING A RECORDED DVD-RW ................. 159

Uninstalling Software..................................... 160

Cautions When Using DVD Video Camera/

Recorder by Connecting It to PC.................160

Introduction to Video Editing Software...........161

Subsidiary Information

Introduction to Optional Accessories .............162

CAMERA ACCESSORIES ................................ 162

POWER SUPPLY..............................................162

Removing Disc from Its Package...................163

REMOVING AND REPLACING FROM/IN ROUND

DVD HOLDER ................................................163

REMOVING DISC FROM CARTRIDGE............164

Cleaning.........................................................164

Changing Setting of Demonstration...............165

Terminology ...................................................166

No DVD Video Camera/Recorder Operation –

Check the Following:...................................169

Trouble Messages .........................................171

Troubleshooting .............................................178

System Reset ................................................185

Major Specifications.......................................186

To Order in the United States ........................189

To Order in the Canada .................................189

Index ..............................................................190

Be sure to read the following before opening

the package of CD-ROM.............................192

TOC

English

15

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP14S):

For DZ-GX20MA only.

Portable power supply for this DVD video

camera/recorder. Charge it before use.

Battery (model DZ-BP7S):

For DZ-MV780MA, DZ-MV750MA, DZ-

BX31A only. Portable power supply for this

DVD video camera/recorder. Charge it

before use.

AC adapter/charger (model DZ-ACS2):

Used to power the DVD video camera/

recorder from AC outlet, or charge battery.

DC power cord:

When powering the DVD video camera/

recorder from household AC outlet, use

this cord to connect the DVD video

camera/recorder and AC adapter/charger.

Power cable:

Connect between household AC outlet and

AC adapter/charger.

Infrared remote control

(model DZ-RM4W):

Use to control the DVD video camera/

recorder from a distance. For DZ-GX20MA

or DZ-MV780MA only.

Lithium battery (model CR2032):

To power the remote control. For DZ-

GX20MA or DZ-MV780MA only.

AV/S input/output cable:

Used when viewing the picture played back

on the DVD video camera/recorder on TV

screen, or input or output video from/to

another video device.

Shoulder strap:

Attach to the DVD video camera/recorder

to hang it from shoulder.

Lens cap and lens cap string:

Attach the lens cap when not recording, to

protect the lens.

Single-sided 8 cm DVD-R disc:

To record videos (movies) on this DVD

video camera/recorder. For DZ-GX20MA,

DZ-MV780MA and DZ-MV750MA only.

Software CD-ROM:

Use this CD-ROM when connecting the

DVD video camera/recorder to PC. For DZ-

GX20MA, DZ-MV780MA and DZ-

MV750MA only.

PC connection cable:

Use this cable when connecting the DVD

video camera/recorder to PC.

Disc cleaning cloth:

Always use this to clean discs.

WARNING: Keep

this battery away

from children. If

swallowed, consult

a physician

immediately for

emergency

treatment.

English

16

Names of Parts

1 Light receiving sensor

(for DZ-GX20MA only)

This sensor controls the amount of light to be

emitted from the built-in flash. Take care not

to block with hand, etc. during recording.

2 Flash (for DZ-GX20MA only) (p. 79)

3 Lens cap string attachment hole (p. 33)

4 Stereo microphone (p. 51)

5 Recording indicator (p. 104)

The red indicator will light during recording.

6 Infrared receiver (for DZ-GX20MA or

DZ-MV780MA only) (p. 35)

When the remote control is used to operate

the DVD video camera/recorder, this

receiver will receive the infrared signal.

7 Optical 10× zoom lens

(for DZ-GX20MA or DZ-MV780MA only)

Optical 16× zoom lens

(for DZ-MV750MA or DZ-BX31A only)

(p. 57)

8 Lens hood (p. 58)

Always remove this lens hood when using

generally available tele-conversion or wide-

conversion lens.

9 Zoom lever (p. 57)

Push the lever to the T side for telephoto, or

to the W side for wide-angle.

10 Accessory shoe (p. 79)

For DZ-GX20MA or DZ-MV780MA only:

The optional video flash can be attached

here. (See the instruction manual of device to

be attached for details.)

11 PC connection terminal (TO PC) (p. 141)

12 AV input/output jack (p. 80, 83)

13 External microphone jack (p. 78)

14 2.5" type liquid crystal display (inside)

(p. 36)

14

1312

6

78 9

(Inside the cover)

10

11

23 451

Although the external appearances of DZ-

GX20MA, DZ-MV780MA, DZ-MV750MA

and DZ-BX31A are different, the method of

operating both models is identical. DZ-

GX20MA illustrations are used in this

manual.

English

17

15 Viewfinder (p. 37)

16 Diopter control (p. 37)

To adjust the focus of image appearing in the

viewfinder. (Pull out the viewfinder.)

17 ACCESS/PC indicator (p. 7, 50, 52)

Will blink or light when the disc in DVD

video camera/recorder is accessed (write or

read is executed) or the DVD video camera/

recorder is connected to PC.

18 PHOTO button (p. 52)

19 DISC EJECT button (p. 46)

Press down and release this button to open

the cover of disc insertion block.

20 Disc insertion block (p. 46)

21 BATTERY EJECT button (p. 41)

Press this button when removing the battery.

22 Battery attachment platform (p. 41)

23 Record button (REC) (p. 50)

24 LOCK switch (p. 51)

It is recommended that you set the LOCK

switch to L (to the upper position) to prevent

the power switch in the “O” position from

accidentally moving to “N”.

25 Power switch (p. 45)

26 Hand strap (p. 32)

ACCESS/PC

DISC EJECT

PHOTO

15 16 17

21

18

22 23 25 26

20

24

19

English

18

27 QUICK MENU button (p. 64)

To display only the functions that you

frequently use (simple menus).

28 FOCUS button (p. 75)

To switch between manual focus and auto-

focus.

29 MENU button (p. 38, 89, 114)

Press this button to display the menu for

setting camera functions and Disc

Navigation.

30 SELECT button (p. 109)

31 DISC NAVIGATION button (p. 106)

32 STOP/EXIT button (p. 9, 59, 65)

To end playback or cancel setting of menu.

33 EXPOSURE button (p. 77)

Press this button to adjust the exposure.

34 Speaker (p. 59)

35 RESET button (p. 185)

To reset all settings to defaults (status when

the DVD video camera/recorder was

shipped from the factory)

36 DISPLAY (Screen display) button (p. 53, 63)

Press this button to display the details of

image being played back or camera setting

status, or switch the display off.

37 CARD ACCESS indicator (p. 7, 52)

38 Volume control buttons (VOL)/

S R buttons (p. 59, 75, 77)

To adjust the volume of sound from speaker,

etc.

39 Card insertion block (p. 49)

40 BLC (backlight compensation) button

(p. 77)

Press this button when subject is being

lighted from rear.

41 f / e / d / c / A buttons

(p. 38, 59, 65, 87)

Use these buttons to select a scene or menu

item, and then press the center (A) to play

back the scene, or designate an option from

the menu.

42 Tripod threaded hole

Used to attach the DVD video camera/

recorder to a tripod.

QUICK

MENU

DISPLAY

FOCUS

EXPOSURE

VOL.

BLC

MENU

SELECT

DISC

NAVIGATION

STOP/EXIT

28 29 30 31 32 33

34 4036 37 38 3935

27

41

42

English

19

43 PHOTO button (p. 52)

44 REC button (p. 50)

45 MENU button (p. 38, 89, 114)

46 SELECT button (p. 109)

47 Reverse search button (p. 60)

48 DELETE button (p. 113)

49 DISC NAVIGATION button (p. 106)

50 DISPLAY button (p. 53, 63)

51 ZOOM T button (p. 57)

52 DIGITAL ZOOM button (p. 57)

53 ZOOM W button (p. 57)

54 Reverse skip button (p. 61)

55 Forward search button (p. 60)

56 Play/pause button (p. 59)

57 Stop button (p. 9, 59, 65)

58 Forward skip button (p. 61)

* The buttons on remote control will function the same as those on DVD video camera/recorder.

REC

PHOTO

DIGITAL

ZOOM

MENU

SELECT

DELETE

DISC

NAVIGATION

DISPLAY

43

44

45

46

47

48

49

52

50

51

54

53

55

56

57

58

English

20

1<>2

Try Recording and Playing Back using Disc

(Video and Photo)

You can record both videos and photos on a DVD-RAM (generally available), but only videos on a

DVD-RW/DVD-R (generally available).

Before You Begin

• It is recommended that you use a DVD-RAM disc for trial recording,

since you can delete the recorded contents (p. 24).

1 Connect a power supply (p. 44).

1

3

2

4

Power cable

AC adapter/charger

DC power cord

2 Insert a disc (p. 46).

1 Press down the DISC EJECT button once

and release it.

2 Gently open the cover until it stops.

3 Push the disc against the turntable at the

center of disc insertion block to lock it

until a click is heard, and then close the

cover of disc insertion block: Do not touch

the disc recording surface or pickup lens

at this time.

DISC EJECT

Tur nta ble

Disc cover

La pagina sta caricando ...

Hitachi DZMV780MA Manuale utente

Hitachi DZMV780MA Manuale utente

in altre lingue

Documenti correlati

Altri documenti