Philips GC9671/50 Manuale utente

4239 001 1140 2

GC9600

PerfectCare

Elite Plus

User Manual

Brugervejledning

Bedienungsanleitung

Käyttöopas

Mode d’emploi

Manuale per l’utente

Gebruiksaanwijzing

Brukerhåndbok

Användarhandbok

DE

CALC

EN IMPORTANT: Perform descaling regularly for great

steam and prolonged life.

DA VIGTIGT: Udfør afkalkningsprocessen jævnligt

for at opnå god damp og forlænge apparatets

levetid.

DE WICHTIG: Entkalken Sie regelmäßig, um eine gute

Dampeistung und eine lange Nutzungsdauer zu

gewährleisten.

FI TÄRKEÄÄ: voit pidentää laitteen käyttöikää

ja parantaa höyryntuottoa suorittamalla

kalkinpoiston säännöllisesti.

FR IMPORTANT : eectuez régulièrement un

détartrage pour obtenir une vapeur de qualité et

une durée de vie prolongée.

IT IMPORTANTE: eseguire regolarmente la

procedura di decalcicazione per una produzione

di vapore ottimale e una maggiore durata del

ferro.

NL BELANGRIJK: regelmatig ontkalken zorgt voor

goede stoom en een langere levensduur.

NO VIKTIG: Utfør avkalking regelmessig for ott damp

og lang levetid.

SV VIKTIGT! Utför avkalkning regelbundet för bra

ånga och förlängd drifttid.

1

2

4

12

11

10

13

16

17

14

9

8

5

1918

6 7 20

3

15

1

GC9600 PerfectCare Elite Plus

ENGLISH 6

DANSK 17

DEUTSCH 28

SUOMI 40

FRANÇAIS 51

ITALIANO 62

NEDERLANDS 73

NORSK 85

SVENSKA 96

6 ENGLISH

Introduction

This iron has been approved by The Woolmark Company

Pty Ltd for the ironing of wool only products provided that

the garments are ironed according to the instructions on the

garment label and those issued by the manufacturer of this

iron. R1703. The Woolmark symbol is a certication mark in

many countries.

Product overview (Fig. 1)

1 Steam supply hose

2 Iron platform

3 First supply hose storage compartment

4 Mains cord with plug

5 ECO button with light

6 On/o button with light and MAX setting

7 ‘Water tank empty’ light

8 EASY DE-CALC light

9 EASY DE-CALC knob

10 Cord storage compartment

11 Second supply hose storage compartment

12 Detachable water tank

13 Carry lock

14 Carry lock release button

15 Soleplate

16 Steam trigger

17 ‘Iron ready’ light

18 Intelligent automatic steam button with light

19 Filling hole

20 Protective glove for vertical ironing

Important

Read the separate important information leaet and the user

manual carefully before you use the appliance. Save both

documents for future reference.

7

ENGLISH

Using your appliance

Filling the water tank

Fill the water tank before every use and when the ‘water tank

empty’ light ashes.

Do not add perfume, water from the tumble dryer, vinegar,

starch, descaling agents, ironing aids, chemically descaled

water or other chemicals, as they may cause water spitting,

brown staining or damage to your appliance.

1 Remove the water tank from the appliance and ll it with

tap water up to the MAX indication.

Tip: Your appliance has been designed for use with tap water.

If you live in an area with very hard water, scale builds up

quickly. In this case it is recommended to use distilled water

to prolong the life of your appliance.

2 Put the water tank back into the appliance by sliding in the

bottom part rst. Then push the top part until it locks into

place.

‘Water tank empty’ light

When the water tank is almost empty, the ‘water tank

empty’ light goes on. Fill the water tank and press the steam

trigger to let the appliance heat up again. When the ‘iron ready’

light lights up continuously, you can continue steam ironing.

OptimalTEMP technology

The OptimalTEMP technology enables you to iron all types

of ironable fabrics, in any order, without adjusting the iron

temperature setting.

Fabrics with these symbols are ironable, for example linen,

cotton, polyester, silk, wool, viscose and rayon.

Fabrics with this symbol are not ironable. These fabrics include

synthetic fabrics such as Spandex or elastane, Spandex-mixed

fabrics and polyolens (e.g. polypropylene), but also prints on

garments.

8

ENGLISH

During ironing, you can place the iron either on the iron

platform or horizontally on the ironing board. Thanks to the

OptimalTEMP technology, the soleplate will not damage the

ironing board cover.

Ironing

1 Place the steam generator on a stable and even surface.

2 Make sure that there is enough water in the water tank

(see section ‘Filling the water tank’).

3 Put the mains plug in an earthed wall socket and press the

on/o button to switch on the steam generator. The blue

power-on light on the appliance and the ‘iron ready’ light

start to ash to indicate that the appliance is heating up

(this takes approx. 2 minutes).

, When the appliance is ready for use, the ‘iron ready

light’ and the power-on light stop ashing and light up

continuously. Additionally you hear a short beep.

4 Press the carry lock release button to unlock the iron from

the iron platform.

5 Press and hold the steam trigger to start ironing.

Never direct steam at people.

Note: For best result on tough fabrics such as cotton, linen

and jeans, keep the steam trigger pressed continuously when

you move the iron over the fabric. Then move the iron over

the same area a few more times without steam to dry the

fabric.

Note: For the best results on silk and shiny synthetic fabrics,

it is recommended to keep the steam trigger pressed

continuously while ironing.

9

ENGLISH

sensor and intelligent automatic steam mode

The intelligent sensor inside your iron knows

exactly when and how your iron is moving. When you activate

intelligent automatic steam mode, the sensor will

start recognizing the movements of your iron and will enable

your iron to release the right amount of steam automatically

without you having to press the steam trigger. This will help you

to get great results faster and easier.

- To activate the intelligent automatic steam mode, press

the intelligent automatic steam button on top of the iron

handle. The intelligent automatic steam light turns on.

- The ‘iron ready’ light moves back and forth when the iron is

moving.

Note: in intelligent automatic steam mode, steam comes out

automatically when you move the iron and stops when you

stop moving the iron. You can still press the steam trigger in

this mode to activate the steam when the iron is not moving.

- You can use the intelligent automatic steam mode in all

steam settings, including ECO and MAX.

Note: for your safety, in intelligent automatic steam mode,

the steam stops when the soleplate is tilted.

- To exit the intelligent automatic steam mode, press

the intelligent automatic steam button. The intelligent

automatic steam light turns o. You need to press the

steam trigger to continue your ironing.

Steam boost function

The steam boost function is designed to help tackle dicult

creases.

- Press the steam trigger twice quickly to activate the steam

boost function. The appliance releases powerful shots of

steam continuously.

- To stop the steam boost function, press the steam trigger

once.

2x

10

ENGLISH

Vertical ironing

Hot steam is emitted from the iron. Never attempt to remove

creases from a garment that someone is wearing. Do not

apply steam near your or someone else’s hand.

You can use the iron in vertical position to remove wrinkles

from hanging fabrics.

1 Put on the glove.

2 Hold the iron in vertical position, press the steam trigger

and touch the garment slightly with the soleplate.

Note: for your safety, the intelligent automatic steam mode is

not available for vertical ironing.

ECO setting

By using the ECO setting (reduced amount of steam), you can

save energy without compromising on the ironing result.

- Press the ECO button. The green ECO light turns on.

- To deactivate ECO setting, press then ECO button again.

The green ECO light goes o.

MAX setting

For faster ironing and a higher amount of steam, you can use

MAX setting.

1 Press and hold the on/o button for 2 seconds until the

light turns white.

2 To deactivate MAX setting, press and hold the on/o

button again for 2 seconds until the white light turns blue

2 sec.

11

ENGLISH

Auto shut-o

- The appliances enters the standby mode if it has not been

used for 10 minutes. The light in the on/ o button starts to

ash.

- To activate the appliance again, press the on/o button.

The appliance starts to heat up again.

- The appliance switches o automatically if it has not been

used for another 10 minutes after it enters the standby

mode. The light in the on/o button goes o.

Ironing tips

Minimising wrinkles while drying

Start wrinkle removal early in the drying process by spreading

out your laundry properly after washing and by putting

garments on hangers to make them dry naturally with fewer

wrinkles.

Best practice shirt ironing

Start with the time-consuming parts like collar, cu links and

sleeves. Next, iron the bigger parts like front and back to

prevent wrinkling the bigger parts when you are busy ironing

the time-consuming parts.

Collar: When you iron a collar, start on its underside and work

from the outside (the pointy end) inwards. Turn over and

repeat. Fold down the collar and press the edge for a more

crisp nish.

Buttons: Iron on the reverse side of the buttons for more

eective and faster ironing.

Cleaning and maintenance

To properly maintain your appliance, clean the iron and the

appliance regularly.

1 Clean the appliance with a moist cloth. To remove

stubborn stains, you can use a small amount of washing-

up liquid.

2 To easily and eectively remove stains from the soleplate,

switch on the appliance and let it heat up. When the

appliance has heated up, move the iron over a moist cloth

while you press the steam trigger.

Tip: Clean the soleplate regularly to ensure smooth gliding.

12

ENGLISH

IMPORTANT - EASY DE-CALC

It is very important to use the EASY DE-CALC function as

soon as the EASY DE-CALC light starts to ash and the

appliance beeps continuously.

The EASY DE-CALC light ashes and the appliance beeps

continuously after about a month or 10 ironing sessions to

indicate that the appliance needs to be descaled. Perform

the following EASY DE-CALC procedure before you continue

ironing.

To avoid the risk of burns, unplug the appliance and let it cool

down for at least two hours before you perform the EASY DE-

CALC procedure.

1 Remove the plug from the wall socket.

2 Place the appliance on the edge of the tabletop.

3 Hold a cup (with a capacity of at least 350ml) under the

EASY DE-CALC knob and turn the knob anticlockwise.

4 Remove the EASY DE-CALC knob and let the water with

scale particles ow into the cup.

5 When no more water comes out of the appliance, reinsert

the EASY DE-CALC knob and turn it clockwise to fasten it.

6 You can continue using your iron immediately after

completing the EASY DE-CALC procedure.

13

ENGLISH

IMPORTANT – Descaling the soleplate

If you do not use the EASY DE-CALC function regularly, scale

particles may build up in the soleplate and brown stains may

come out of the soleplate during ironing. In this situation,

you need to descale the soleplate by following the procedure

below. We advice you to repeat the procedure twice to better

clean the soleplate.

To avoid the risk of burns, unplug the appliance and let it cool

down for at least two hours before you descale the soleplate.

1 Remove the plug from the wall socket.

2 Place the appliance on the edge of the tabletop.

3 Make sure that the water tank is empty.

4 Hold a cup (with a capacity of at least 350ml) under the

EASY DE-CALC knob and turn the knob anticlockwise.

5 Remove the EASY DE-CALC knob and let the water with

scale particles ow into the cup.

6 Hold the appliance in the position that EASY DE-CALC

opening is facing up and pour 900ml distilled water into

the opening.

Note: Be mindful on the heavy weight of the appliance when

you tilt it.

14

ENGLISH

7 Keep the EASY DE-CALC opening facing up, reinsert the

EASY DE-CALC knob and turn it clockwise to fasten it.

8 Put the appliance back on a stable and even surface. Plug

in the appliance and switch it on.

9 Wait for 5 minutes for the appliance to heat up.

10 Keep the steam trigger pressed continuously while you

move the iron on a piece of thick cloth for 3 minutes.

Warning: hot, dirty water comes out of the soleplate.

11 Stop moving the iron when no more water comes out or

when steam starts coming out.

12 You can continue to use the appliance immediately.

Otherwise unplug the appliance after the descaling is

completed.

Storage

1 Switch o the appliance and unplug it.

2 Remove the water tank and empty it.

3 Put the iron on the iron platform. Push the carry lock to

lock the iron onto the platform.

4 Fold the supply hose and mains cord. Put them in their

respective storage compartments.

5 You can carry the appliance with one hand by the handle

of the iron.

Do not carry the appliance by holding the water tank release

lever.

15

ENGLISH

Troubleshooting

This chapter summarises the most common problems

you could encounter with the appliance. If you are unable

to solve the problem with the information below, visit

www.philips.com/support for a list of frequently asked

questions or contact the Consumer Care Centre in your

country.

Problem Possible cause Solution

The ironing board

cover becomes

wet or there are

water droplets

on the garment

during ironing.

Steam has condensed on

the ironing board cover after

a long ironing session.

Replace the ironing board cover if

the foam material has worn out. You

can also add an extra layer of felt

material under the ironing board

cover to prevent condensation on

the ironing board. You can buy felt in

a fabric shop.

You have an ironing board

cover that is not designed

to cope with the high steam

rate of the appliance.

Put an extra layer of felt material

under the ironing board cover to

prevent condensation on the ironing

board. You can buy felt in a fabric

shop.

Water droplets

come out of the

soleplate.

The steam that was

still present in the hose

has cooled down and

condensed into water. This

causes water droplets to

come out of the soleplate.

Steam away from the garment for a

few seconds.

Steam and/or

water come out

from under the

EASY DE-CALC

knob.

The EASY DE-CALC knob is

not tightened properly.

Switch o the appliance and let the

appliance cool down for 2 hours.

Unscrew the EASY DE-CALC knob

and screw it back onto the appliance

properly. Note: Some water may

escape when you remove the knob.

The rubber sealing ring of

the EASY DE-CALC knob is

worn.

Contact an authorised Philips service

centre for a new EASY DE-CALC

knob.

Dirty water

and impurities

come out of the

soleplate or the

soleplate is dirty.

Impurities or chemicals

present in the water have

deposited in the steam

vents and/or on the

soleplate.

Clean the soleplate with a damp

cloth.

Too much scale and

minerals have accumulated

inside the appliance.

Descale the appliance regularly (see

chapter ‘Important - DESCALING’).

16

ENGLISH

Problem Possible cause Solution

The iron leaves

a shine or an

imprint on the

garment.

The surface to be ironed

was uneven, for instance

because you were ironing

over a seam or a fold in the

garment.

PerfectCare is safe on all garments.

The shine or imprint is not

permanent and will come o if you

wash the garment. Avoid ironing

over seams or folds or you can place

a cotton cloth over the area to be

ironed to avoid imprints at seams

and folds.

The appliance

does not produce

any steam.

There is not enough water

in the water tank (the ‘water

tank empty’ light ashes).

Fill the water tank (see chapter ‘Using

your appliance’, section ‘Filling the

water tank’).

The appliance is not hot

enough to produce steam.

Wait until the ‘iron ready’ light on the

iron lights up continuously.

You did not press the steam

trigger.

Press the steam trigger and keep it

pressed while you iron.

The water tank is not placed

in the appliance properly.

Slide the water tank back into the

appliance rmly (‘click’).

The appliance is not

switched on.

Insert the plug in the wall socket and

press the on/o button to switch on

the appliance.

The appliance

has switched o.

The light in the

on/o button

ashes.

The auto-o function is

activated automatically

when the appliance has not

been used for more than 10

minutes.

Press the power on/o button to

switch on the appliance again.

The appliance

produces a

pumping sound.

Water is pumped into the

boiler inside the appliance.

This is normal.

If the pumping sound continues

nonstop, switch o the appliance

and remove the plug from the wall

socket. Contact an authorised Philips

service centre.

17DANSK

Introduktion

Strygejernet er blevet godkendt af Woolmark Company

Pty Ltd til strygning af uldprodukter, hvis tøjet stryges i

overensstemmelse med instruktionerne på tøjets mærkat og

instruktionerne fra producenten af dette strygejern. R1703.

Woolmark-symbolet er et certiceringsmærke i mange lande.

Produktoversigt (Fig. 1)

1 Dampslange

2 Holder til strygejern

3 Opbevaringsrum til forsyningsslange

4 Netledning med stik

5 ECO-knap med lys

6 On/o-knap med lys og MAX-indstilling

7 Lysindikator for "tom vandtank"

8 EASY DE-CALC-indikator

9 EASY DE-CALC-knap

10 Rum til at opbevare ledningen

11 Andet opbevaringsrum til forsyningsslange

12 Aftagelig vandtank

13 Transportlås

14 Udløserknap til transportlås

15 Strygesål

16 Dampudløser

17 Lysindikator for "strygejernet er klar"

18 Intelligent automatisk dampknap med lys

19 Påfyldningshul

20 Beskyttelseshandske til lodret strygning

Vigtigt!

Læs den separate folder med vigtige oplysninger og

brugervejledningen omhyggeligt igennem, før du tager

apparatet i brug. Gem begge dokumenter til eventuel senere

brug.

18

DANSK

Sådan bruges apparatet

Påfyldning af vandtanken

Fyld vandtanken før hver brug, og når indikatoren "tom

vandtank" lyser.

Tilsæt ikke parfume, vand fra en tørretumbler, eddike,

stivelse, afkalkningsmiddel, strygemiddel, kemisk afkalket

vand eller andre kemikalier, da de kan medføre vandstænk,

brune pletter eller skader på apparatet.

1 Tag vandtanken ud, skyl og fyld den med friskt vand op til

MAX-markeringen.

Tip: Apparatet er udviklet til brug med vand fra hanen. Hvis

du bor i et område med hårdt vand, dannes der hurtigt

kalkaejringer. I dette tilfælde anbefales det at anvende

destilleret vand for at forlænge apparatets levetid.

2 Sæt vandtanken tilbage i apparatet ved at skubbe i den

nederste del først. Skub derefter den øverste del, indtil

den låser på plads.

Lysindikator for "tom vandtank"

Når vandtanken er ved at være tom, lyser indikatoren for

"tom vandtank". Fyld vandtanken, og tryk på dampudløseren

for at lade apparatet varme op igen. Når lysindikatoren for

"strygejernet er klar" lyser konstant, kan du fortsætte med

dampstrygningen.

OptimalTEMP-teknologi

OptimalTemp-teknologien gør det muligt at stryge alle

strygbare tekstiler, i vilkårlig rækkefølge, uden at justere

strygetemperaturen.

Materialer med disse symboler er strygbare, f.eks. linned,

bomuld, polyester, silke, uld, viskose og rayon.

Materialer med dette symbol kan ikke stryges. Disse materialer

omfatter syntetiske stoer som f.eks. spandex eller elastan,

stoer med spandex-blandinger og polyolener (f.eks.

polypropylen) samt tøj med påtrykt mønster.

19

DANSK

Under strygningen kan du enten stille strygejernet i holderen

eller i vandret position på strygebrættet. OptimalTEMP-

teknologien sikrer, at strygesålen ikke skader beklædningen på

strygebrættet.

Strygning

1 Stil dampgeneratoren på et stabilt og jævnt underlag.

2 Kontroller, at der er nok vand i vandtanken (se afsnittet

"Påfyldning af vandtanken").

3 Sæt netstikket i en jordforbundet stikkontakt, og tryk på

tænd/sluk-knappen for at tænde for dampgeneratoren.

Den blå kontrollampe på apparatet og lysindikatoren for

"strygejernet er klar" begynder at blinke for at indikere, at

apparatet varmer op (det tager ca. 2 minutter).

, Når apparatet er klar til brug, holder lysindikatoren

"strygejernet er klar" og kontrollampen op med at blinke

og lyser konstant. Desuden kan du høre et kort bip.

4 Tryk på udløserknappen til transportlåsen for at frigøre

strygejernet fra holderen.

5 Hold dampudløseren nede for at begynde strygning.

Ret aldrig dampstrålen mod personer.

Bemærk: For at opnå det bedste strygeresultat på stof

såsom bomuld, linned og jeans skal du holde dampudløseren

nede konstant, når du bevæger strygejernet over stoet.

Bevæg derefter strygejernet over samme område et par

gange mere uden damp for at tørre stoet.

Bemærk: For at opnå det bedste strygeresultat på silke

og skinnende, syntetiske tekstiler anbefales det at holde

dampudløseren nede konstant under strygningen.

20

DANSK

Sensor og intelligent automatisk

damptilstand

Den intelligente sensor inde i dit strygejern ved

præcis, hvornår og hvordan dit strygejern er i bevægelse. Når

du aktiverer intelligent automatisk damptilstand, vil sensoren

begynde at genkende dit strygejerns bevægelser og

gøre dit strygejern i stand til at frigøre den rette mængde damp

automatisk, uden at du skal trykke på dampudløseren. Dette vil

hjælpe dig med at opnå fantastiske strygeresultater hurtigere

og nemmere.

- For at aktivere intelligent automatisk damptilstand skal

du trykke på knappen for intelligent automatisk damp

øverst på strygejernets håndtag. Indikatoren for intelligent

automatisk damp tændes.

- Lysindikatoren for "strygejernet er klar" bevæger sig frem og

tilbage, når strygejernet er i bevægelse.

Bemærk: I intelligent automatisk damptilstand kommer der

damp ud automatisk, når du bevæger strygejernet, og den

stopper, når du holder op med at bevæge strygejernet. Du

kan stadig trykke på dampudløseren i denne tilstand for at

aktivere damp, når strygejernet ikke er i bevægelse.

- Du kan bruge intelligent automatisk damptilstand i alle

indstillinger, herunder ECO og MAX.

Bemærk: Af sikkerhedsmæssige årsager stopper dampen, når

strygesålen står skråt i intelligent automatisk damptilstand.

- For at afslutte intelligent automatisk damptilstand skal

du trykke på knappen for intelligent automatisk damp.

Indikatoren for intelligent automatisk damp slukkes. Du skal

trykke på dampudløseren for at fortsætte strygningen.

Dampskudsfunktion

Dampskudsfunktionen er udviklet til at hjælpe med at klare

vanskelige folder.

- Tryk på dampudløseren to gange hurtigt efter hinanden

for at aktivere dampskudsfunktionen. Apparatet afgiver et

kraftigt skud damp kontinuerligt.

- For at stoppe dampskudsfunktionen skal du trykke på

dampudløseren én gang.

2x

21

DANSK

Lodret strygning

Strygejernet udsender varm damp. Du må aldrig forsøge at

fjerne folder fra tøj, som nogen har på. Anvend ikke damp i

nærheden af din egen eller en anden persons hånd.

Du kan bruge dampstrygejernet i lodret position til at fjerne

folder fra ophængte tekstiler.

1 Tag handsken på.

2 Hold strygejernet lodret, tryk på dampudløseren, og berør

forsigtigt tekstilet med strygesålen.

Bemærk: Af hensyn til din sikkerhed er intelligent automatisk

damptilstand ikke tilgængelig ved lodret strygning.

ECO-indstilling

Ved hjælp af ECO-indstillingen (nedsat mængde damp) kan du

spare energi, uden at det går ud over strygeresultatet.

- Tryk på ECO-knappen. Den grønne ECO-indikator tændes.

- For at deaktivere ECO-indstilling skal du trykke på ECO-

knappen igen. Den grønne ECO-indikator slukkes.

MAX-indstilling

For hurtigere strygning og en højere mængde damp kan du

bruge MAX-indstillingen.

1 Hold on/o-knappen nede i 2 sekunder, indtil

lysindikatoren lyser hvidt.

2 For at deaktivere MAX-indstillingen skal du igen holde on/

o-knappen nede i 2 sekunder, indtil den hvide indikator

skifter til blå

2 sec.

22

DANSK

Auto-sluk

- Apparatet går i standbytilstand, hvis det ikke har været

i brug i 10 minutter. Lysindikatoren i on/o-knappen

begynder at blinke.

- Tryk på on/o-knappen for at aktivere apparatet igen.

Apparatet begynder nu at varme op igen.

- Apparatet slukker automatisk, hvis det ikke har været

i brug i 10 minutter, efter det er gået i standbytilstand.

Lysindikatoren i on/o-knappen slukkes.

Strygetip

Minimering af folder under tørringen

Start udglatning af folder i begyndelsen af tørringen ved at

sprede dit tøj grundigt ud efter vask og ved at hænge tøjet på

bøjler, så det tørrer naturligt med færre folder.

Fremgangsmåde for skjortestrygning

Begynd med de tidskrævende dele, f.eks. krave, manchetter og

ærmer. Stryg derefter de store dele som bryst og ryg. På denne

måde undgår du, at de større dele krøller, mens du stryger de

tidskrævende dele.

Krave: Når du stryger en krave, skal du starte fra undersiden

og arbejde dig indad (fra den spidse ende). Vend kraven, og

gentag proceduren. Fold kraven ned, og pres kanten for et

mere skarpt resultat.

Knapper: Stryg på modsatte side af knapperne for en mere

eektiv og hurtigere strygning.

Rengøring og vedligeholdelse

Korrekt vedligeholdelse af dit apparat kræver, at du rengør

strygejernet og apparatet regelmæssigt.

1 Tør apparatet af med en fugtig klud. Du kan fjerne

genstridige pletter ved at bruge en lille smule

opvaskemiddel.

2 Du kan nemt og eektivt fjerne pletter fra strygesålen

ved at tænde for apparatet og lade det varme op. Når

apparatet er varmet op, skal du bevæge strygejernet over

en fugtig klud, mens du trykker på dampudløseren.

Tip: Rengør strygesålen regelmæssigt for at sikre, at den

glider let.

La pagina sta caricando ...

Philips GC9671/50 Manuale utente

Philips GC9671/50 Manuale utente

in altre lingue

Documenti correlati