iiyama Vision Master Pro 514 HM204DT A Manuale utente

iiyama
Marca
iiyama
Modello
Vision Master Pro 514 HM204DT A
Categoria
Monitora CRT
Tipo
Manuale utente
HM204DT A
DEUTSCH
FRANCAIS
NEDERLANDS
TABLE OF CONTENTS
SAFETY PRECAUTIONS............................................
1
1
4
4
FOR YOUR SAFETY............................................................
USER MANUAL
Thank you very much for choosing the iiyama Vision Master color monitor.
We recommend that you take a few minutes to read carefully through this brief but comprehensive
manual before installing and switching on the monitor. Please keep this manual in a safe place
for your future reference.
CUSTOMER SERVICE................................................
CLEANING...................................................................
BEFORE YOU OPERATE THE MONITOR..........................
FEATURES..................................................................
LOCATION OF CONTROLS........................................
OPERATING THE MONITOR................................................
ADJUSTMENT MENU CONTENTS
..............................
POWER MANAGEMENT FEATURE.............................
TROUBLE SHOOTING........................................................
APPENDIX............................................................................
5
5
5
5
6
7
CONNECTING YOUR MONITOR..................................
ACCESSORIES...........................................................
16
18
18
19
19
8
9
15
15
PRESET MODES.........................................................
CONNECTOR PIN ASSIGNMENT.................................
SPECIFICATIONS.......................................................
ENGLISH
SVENSKA
FOR WINDOWS 95/98/2000/ME/XP USERS.................
SELF DIAGNOSIS FUNCTION........................................
ITALIANO
All manuals and user guides at all-guides.com
all-guides.com
ENGLISH
Congratulations!
The display you have just purchased carries the TCO’03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This makes
for a high performance product, designed with the user in focus
that also minimizes the impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
• Good visual ergonomics and image quality in order to improve the working environment for the
user and to reduce sight and strain problems. Important parameters are luminance, contrast,
resolution, reflectance, colour rendition and image stability.
Energy
• Energy-saving mode after a certain time – beneficial both for the user and the environment
• Electrical safety
Emissions
• Electromagnetic fields
• Noise emissions
Ecology
• The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
• Restrictions on
o chlorinated and brominated flame retardants and polymers
o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation
with scientists, experts, users as well as manufacturers all over the world. Since the end of the
1980s TCO has been involved in influencing the development of IT equipment in a more user-
friendly direction. Our labelling system started with displays in 1992 and is now requested by
users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
All manuals and user guides at all-guides.com
ENGLISH
n We reserve the right to change specifications without notice.
n All trademarks used in this user manual are the property of their respective owners.
n As an E
NERGY STAR
®
Partner, iiyama has determined that this product meets the ENERGY STAR
®
guidelines for
energy efficiency.
FCC DECLARATION OF CONFORMITY
Model Number: HM204DT A
Trade Name: iiyama
Responsible Party: IIYAMA North America, Inc.
Address: 65 West Street Road, Suite 101B, Warminster, PA18974 U.S.A.
Telephone number: 215-682-9050
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This equipment may not cause harmful interference, and (2) this equipment must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If you determine the equipment does cause harmful interference to radio or
television reception (this may be determined by monitoring the interference while turning the equipment off
and on), you are encouraged to try to correct the interference by one of the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and receiver.
n Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
n Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, the specified signal cables below should be used.
Signal Cable MB38 (Enclosed): 242Z013-01
Signal Cable MB31 (Optional): 242Z017-01
CAUTION Changes or modifications not expressly approved by iiyama could void the users authority
to operate the equipment under FCC compliance regulations.
CE MARKING DECLARATION OF CONFORMITY
This Color Data Monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive”
and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential
areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the
buildings. All places of operation are characterized by their connection to the public low voltage power supply
system.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus
as set out in the radio interference regulation of the Canadian department of communications.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
All manuals and user guides at all-guides.com
ENGLISH
1 FOR YOUR SAFETY
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous
and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use the monitor where water may be splashed or spilt on the monitor as it may cause fire
or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage
will cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as
it may cause electric shock.
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, or dusty or
smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where
the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
All manuals and user guides at all-guides.com
ENGLISH
CAUTION
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the cabinet bottom will
be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cables are disconnected. If you do not disconnect them, it may cause fire or electric shock.
It is recommended that two people are used when moving the monitor.
UNPLUG THE MONITOR
The power cable is the disconnect device. If the monitor is not in use for a long period of time it is
recommended that the power cable it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
DO NOT PUT FLOPPY DISKS NEAR THE MONITOR
Magnetic data recordings such as on a floppy disk may disappear if they are placed on or near the
monitor as the degauss circuit causes a strong momentary magnetic field.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24
inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break
every hour is recommended as looking at the screen continuously can cause eye strain.
MAGNETIC FIELD INFLUENCE
Place the monitor away from TV, speaker systems or any other source of strong magnetic fields.
The monitor may be noisy or the screen's output may be distorted as a result of interference from
other appliances.
INTENDED APPLICATION
The monitor can be also used in a medical environment to display video signal from computer or
other system. The monitor is not suitable for use in areas that patients are cared for.
UNSUITABLE LOCATION FOR USING THE MONITOR
The monitor is not suitable for use in the presence of a FLAMMABLE ANAESTHETIC MIXTURE WITH
AIR or WITH OXYGEN OR NITROUS OXIDE.
The monitor is not suitable for use in areas that patients are cared for. This encloses a space
within the room 1.83 m (6 feet) beyond the perimeter of the bed (examination table, dental chair,
treatment booth, and the like) in its intended location, and extending vertically 2.29 m (7-1/2 feet)
above the floor.
FOR YOUR SAFETY 2
All manuals and user guides at all-guides.com
ENGLISH
OTHERS
ATTENTION FOR USING THE OPQ FUNCTION
(=Optimize Picture Quality)
Due to the nature of the Diamondtron U3-CRT, misconvergence, misalignment of the aperture grille,
picture shaking or burn-in of phosphors may happen when displaying a high-white picture for a
long time while the OPQ function is active.
Turn OFF the OPQ function when displaying anything other than DVD or other moving pictures.
OPTIMUM PICTURE FOR THE OPQ FUNCTION
NOTE
3 FOR YOUR SAFETY
When you select the Picture or Movie mode within the OPQ function, and use a word
processor or display text and a like then your eyes maybe subject to fatigue. This will be
because the right side of characters will appear stretched, bright and slightly out of
focus. This is normal because the mode you have selected is designed for still or moving
pictures. To reduce fatigue use the Text mode or take a short break.
1. Text1 mode
n Word processor and spreadsheet
n Text and a like
2. Picture mode
n Still picture
3. Movie mode
n Moving picture (DVD / TV)
4. Text2 mode
n Word processor and spreadsheet
n Text and a like
* With Text2 mode, the outline of character is emphasized more than Text1 mode. In case that
the characters get blurred with Text1 mode, select Text2 mode.
All manuals and user guides at all-guides.com
all-guides.com
ENGLISH
CUSTOMER SERVICE
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
n
CLEANING
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Wipe the CRT with a soft dry cloth. Tough stains can be removed with diluted ethanol
(15% or less), neutral glass cleaner or neutral detergent solvent.
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
n
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service
center.
n
The CRT screen is protected by an anti-reflection & anti-static coating. Do not
scratch or rub the screen with a hard object, as this could damage the coating.
n
Never use any of the following strong solvents. These will damage the cabinet and
the CRT.
n
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CRT
WARNING
CAUTION
NOTE
FOR YOUR SAFETY 4
All manuals and user guides at all-guides.com
ENGLISH
5 BEFORE YOU OPERATE THE MONITOR
FEATURES
ACCESSORIES
The following accessories should be included in the Vision Master packaging. Please ensure that
all of them are enclosed.
K High Quality & High Brightness (OPQ ON: 200cd/m
2
)
K OPQ Function for Digital Camera Edit & DVD Playback
K Supports sRGB for Clear Publications & Photography
K Separate Color Adjustment of Red / Blue for Fine Picture Quality
K Original Gamma Function for Multi-Quality Picture
K Supports “Flicker Free” Refresh Rates up to 87Hz at 2048×1536
K Plug & Play VESA DDC2B Compliant, Windows
®
95/98/2000/Me/XP Compliant
K Automatic Landing System to cancel Magnetic Field Effect
K Ergonomic Design: TCO ’03 and MPR 3 Approved
K Power Management (E
NERGY STAR
®
and VESA DPMS Compliant)
K Space Saving, Compact Case Design
K USB Hub Function
K Stereo Speakers with High Quality Sound
BEFORE YOU OPERATE THE MONITOR
The stand functions as a hub when connected to a USB compliant computer and USB peripherals.
However, with older operating systems and/or BIOS settings in your computer, the USB hub may
not operate. In this case, please contact your computer dealer first for advice.
n Power Cable*
n Signal Cable MB38 (For D-Sub connection)
n USB Cable SU44
n Audio Cable AD24 (RCA to mini jack)
n User Manual
CAUTION
*
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.
However, all guarantees and warranties are void for any problems or damage
caused by a power cable not supplied by iiyama.
FOR WINDOWS 95/98/2000/ME/XP USERS
Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be obtained via the
Internet, using the address: http://www.iiyama.com (U.S.A.)
http://www.iiyama.co.uk (U.K.)
NOTE For additional information on how to download the driver for your monitor, please
access one of the internet sites noted above.
n
Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer first for advice.
n
All manuals and user guides at all-guides.com
ENGLISH
LOCATION OF CONTROLS
P
O
W
E
R
A
U
D
I
O
I
N
V
I
D
E
O
I
N
1
A
C
I
N
U
P
V
I
D
E
O
I
N
2
Back
A
Speakers
The volume control is performed with the
On Screen Display. Press the /
Buttons and then the Menu Button
continuously when the Menu is not
displayed.
B
Power Indicator
C
Input Select Button (VIDEO 1/2)
Select either VIDEO IN 1 or 2 for the signal
input when both of the signal inputs are
connected to a signal source. Switch
VIDEO IN 1 and 2 whenever pressing Input
Select Button for 3-4 seconds.
When only one of the two signal
inputs is connected to the signal
source, the one connected is
automatically selected. Input
Select Button is not available if
there is no signal input from the
selected connector or during the
power management mode.
D
Four Directional Button / / /
E
Menu Button (MENU)
F
D-sub mini 15pin Connector (VIDEO IN 1)
G
D-sub mini 15pin Connector (VIDEO IN 2)
H
AC Connector (AC IN)
I
Audio Connector (AUDIO IN)
J
USB-UP
Connect with a USB compliant computer
by the USB Cable attached to the monitor.
K
USB-DOWN
Connect any cables from USB compliant
peripherals such as mouse, keyboard, etc.
L
Headphone Connector
M
Switch
( : On Symbol, : Stand-by Symbol)
NOTE
Front
MENU
VIDEO 1/2
BEFORE YOU OPERATE THE MONITOR 6
All manuals and user guides at all-guides.com
ENGLISH
7 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
[Example of Connection]
A
Ensure that both the computer and the monitor are switched off.
B
Connect the computer to the monitor with the signal cable. (See page 19 for CONNECTOR PIN
ASSIGNMENT.)
C
Connect the monitor to the audio equipment with the Audio Cable when using the audio
features.
D
Connect the monitor to the USB compliant computer with the USB Cable when using the USB
hub features.
E
Connect the Power Cable to the monitor first and then to the power supply.
NOTE n The signal cables used for the connection vary by the type of computers you use. An
incorrect connection may cause serious damage to both the monitor and the computer.
The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a
special cable is required please contact your local iiyama dealer or regional iiyama
office.
n For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
n Make sure you tighten the finger screws at each end of the signal cable.
Power Cable
(Accessory)
Audio Cable AD24
(Accessoy)
Signal Cable MB38
(Accessory)
P
O
W
E
R
A
U
D
I
O
I
N
V
I
D
E
O
I
N
1
A
C
I
N
U
P
V
I
D
E
O
I
N
2
USB Cable SU44
(Accessory)
Printer
Keyboard
Mouse
Computer
All manuals and user guides at all-guides.com
ENGLISH
H-Size
Screen Control
50
Adjustment icon
Adjustment menu
presently selected
The line shows the
progress of the
adjustment being
made.
|||||||||||||||||||||||||
·························
V-Size
50
|||||||||||||||||||||||||
·························
OPERATING THE MONITOR
To create the best picture, your iiyama Vision Master has been preset at the factory with the signal
timings listed on page 19 in
PRESET MODES. If an incorrect picture appears during the operation,
adjust the image by following the procedure shown below to get the desired picture.
After selecting an item in the Main Menu, the adjustments and settings
are made in the Sub-Menu.
For example, to adjust the horizontal screen size, select
(Screen Control) on the Main Menu by using the / Buttons.
The Sub-Menu appears when you press the Menu Button.
B
The On Screen Display disappears in optional setting seconds after you stop pressing the
buttons while performing an adjustment. (See page 13 for OSD Off Timer.)
n
n
NOTE
Select (H-Size) on the Sub-Menu by using the / Buttons.
An adjustment scale will turn white when you press the Menu
Button. Use the / Buttons to adjust the horizontal screen size.
The vertical screen size adjustment can be also made on this screen
by using the / Buttons. See ADJUSTMENT MENU CONTENTS on
next pages for further information.
C
(
Adjustments for Size, Position, Pin-Cushion and Trapezoid are saved for each signal timing.
Except for these adjustments, all other adjustments such as Color, Parallelogram, Convergence,
Moire, and Landing have only one setting which applies to all signal timings.
Main Menu appears on the screen when you press the Menu
Button.
Screen Control
Menu
IN 1
RB
FUNC
Adjustment icon
Adjustment menu
presently selected
Signal input connector
presently selected
OPERATING THE MONITOR 8
All manuals and user guides at all-guides.com
all-guides.com
ENGLISH
9 OPERATING THE MONITOR
Sub-MenuMain Menu
Problem / Option Button to Press
SWITCHING CONTRAST/BRIGHTNESS AND VOLUME CONTROL
To switch between Contrast/Brightness and Volume Control, press the Menu Button
within 2 seconds after pressing the Four Directional Button during the direct adjustments
above.
NOTE
n
The On Screen Display disappears approx. 3 seconds after you stop pressing the
buttons while performing the direct adjustment, irrespective of OSD Off Timer setting.
(See page 13 for OSD Off Timer.)
n
ADJUSTMENT MENU CONTENTS
Direct
Too soft
Too loud
Direct
Volume Control
NOTE
Only available on Direct adjustment.
You can skip the Menu pages and display an adjustment scale directly by using the following
button operations.
l Volume Control: Press the / Buttons and then the Menu Button continuously when
the Menu is not displayed.
l Contrast/Brightness: Press the / Buttons when the Menu is not displayed.
l OPQ: Press the / Buttons when the Menu is not displayed.
All manuals and user guides at all-guides.com
ENGLISH
Too dull
Too intense
Too dark
Too bright
NOTE
Color
Control
Color temperature is adjustable sRGB and between approximately 10000K
and 4500K. The factory preset is 9300K.
Return to Menu
Return to Main Menu.
Brightness
Color Temp.
COLOR
Reddish white
Bluish white
Direct
Direct
Contrast
sRGB
Procedure
n To access the sRGB mode, select the Color Temp. function and select 10000K by
pushing the button. Hold down the button & sRGB function will be activated.
When this mode is activated the color temperature is approximately 6500K.
n To deactivate the sRGB mode, push the button while the Color Temp. is selected.
n sRGB is an international standard which defines and unifies the
difference of color appearance between equipment.
n You can not adjust the Contrast, Brightness, Red, Blue, OPQ and Gamma
Correction during sRGB mode because those settings are locked.
NOTE
NOTE Input video signal level: The factory preset is 0.7Vp-p.
To change to 1.0Vp-p, hold down the button until 1.0V appears on screen.
Sub-MenuMain Menu
Problem / Option Button to Press
Red
Too weak
Too strong
Blue
Too weak
Too strong
NOTE
n Red and Blue can be adjusted for each color temperature.
n The adjustment data is reset to the factory-preset data when the color
temperature is changed after the adjustment.
NOTE
See page 9 for Direct adjustment.
OPERATING THE MONITOR 10
All manuals and user guides at all-guides.com
ENGLISH
11 OPERATING THE MONITOR
H-Position
Too far to the left
Too far to the right
Sub-Menu
H-Size
V-Size
V-Position
Zoom
Too small
Too large
Too small
Too large
Too low
Too high
Return to Menu
Screen
Control
Too small
Too large
Main Menu
Problem / Option Button to Press
Tilt
To correct tilt
Return to Menu
Pin-Cushion
Trapezoid
Pin-Balance
Return to Main Menu.
To correct distortion
To correct distortion
To correct distortion
To correct distortion
Shape
Return to Main Menu.
Parallelogram
All manuals and user guides at all-guides.com
ENGLISH
Sub-MenuMain Menu
Problem / Option Button to Press
Moiré is the result of interference between the phosphor layout and the
video signal. By changing the horizontal and vertical size, the moiré can
be reduced. You may find the moiré more noticeable depending on the
Desktop Pattern you select. In this case, change the desktop pattern. If
moiré is still noticeable, use this function to reduce the effect. The picture
may shake if extreme moiré correction is performed.
H-Convergence
H-Moire
Return to Main Menu.
Picture
Quality
To correct misconvergence
for vertical lines
NOTE
To correct vertical
wavy lines
Every time the monitor is switched on, the
monitor is automatically degaussed. But
occasionally the colors change when
moving or swiveling the monitor. In this case,
first select Degauss. If the problem persists,
perform the Landing adjustments.
NOTE
Degauss should not be
repeated continuously. Wait at least
30 minutes between degaussing
operations. While degaussing, the
picture shakes and a low sound
occurs but this does not indicate a
problem, it is normal.
Degauss
V-Convergence
To correct misconvergence
for horizontal lines
Text1
Picture
Word processor, spreadsheet, text and a like
Still picture
Movie
Moving picture (DVD / TV)
OPQ
VIDEO
VIDEO
Gamma Correction
Midtone color is too dark
Midtone color is too bright
Direct
Return to Menu
Text2
Word processor, spreadsheet, text and a like
n With Text2 mode, the outline of character is emphasized more than
Text1 mode. In case that the characters get blurred with Text1 mode,
select Text2 mode.
n See page 9 for Direct adjustment.
NOTE
OPERATING THE MONITOR 12
All manuals and user guides at all-guides.com
ENGLISH
13 OPERATING THE MONITOR
Sub-Menu
Top-Left
Top-Right
Bottom-Left
Bottom-Right
To correct discoloration
To correct discoloration
To correct discoloration
To correct discoloration
Return to Menu Return to Main Menu.
Landing
Main Menu
Problem / Option Button to Press
OSD H-Position
OSD V-Position
Function
Deutsch
Français
Nederlands
Svenska
Language
English
English
German
French
Dutch
Swedish
Japanese
Lockout
All adjustment items except this function
are locked out.
OSD Off Timer
3 5 15 30 45 sec
You can set the OSD display time to any
one of the above 5 settings.
Japanese
Too far to the left
Too far to the right
Too low
Too high
On
Of f Lockout is canceled.
All manuals and user guides at all-guides.com
all-guides.com
ENGLISH
Sub-MenuMain Menu
Option
Help
Information
Help
Off
On
The online balloon help is off.
Every time you select the sub-menu icon,
the online balloon help appears to indicate
the menu contents or adjustment procedure.
The model name, the serial number and
the current horizontal scan frequency
and vertical refresh rate is displayed.
Return to Menu
Return to Main Menu.
Return to Menu
Return to Main Menu.
NOTE
Performing this operation resets any adjustment
data made by the user to the factory-preset
frequencies. The following settings made by the
user for signals other than the factory-preset
timings remain unchanged.
H-Size V-Size Pin-Cushion
H-Position V-Position Trapezoid
Factory-preset data is restored.
Any changes are automatically saved in
the memory when the On Screen Display
disappears.
Save Recall
Auto
Turning off the power should be avoided while
using the Menu.
NOTE
Reset
Function
OPERATING THE MONITOR 14
All manuals and user guides at all-guides.com
ENGLISH
Even when using the power management mode, the monitor consumes electricity.
Turn off the Power Switch whenever the monitor is not used, during the night and
weekends, to avoid unnecessary power consumption.
NOTE
n
n
It is possible that the video signal from the computer may be on while the H or V sync signal
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
n
If two separate computers are connected to the monitor, one to the VIDEO IN 1 input
connector and the other to the VIDEO IN 2 input connector, the POWER MANAGEMENT
feature will work only if both computers meet the conditions described above.
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 1W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in 10 seconds when either the keyboard or the mouse
are touched again.
The power management feature of this product complies with every power saving requirement of
ENERGY STAR
®
and VESA DPMS. When activated, it automatically reduces unnecessary power
consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management
function, including any timer settings is configured by the operating system. Check your operating
system manual for information on how this can be configured.
n
POWER MANAGEMENT FEATURE
Procedure
A
Disconnect the signal cable of the computer or turn OFF the computer.
B
Turn ON the monitor.
The monitor has a self-diagnosis function. The monitor diagnoses itself automatically when the
picture does not appear and the power indicator is green or orange because of the failure of
computer or monitor.
n
SELF-DIAGNOSIS FUNCTION
Diagnosis
A
A color bar picture is displayed:
The monitor is working normally. Check the computer.
B
A color bar picture is not displayed:
The monitor may be damaged. Contact your dealer or iiyama service center.
n
0 1 W 100%
POWER
CONSUMPTION
Green
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
15 OPERATING THE MONITOR
All manuals and user guides at all-guides.com
ENGLISH
The screen
position is not in
the center.
The signal timing of the computer is within the specification of the
monitor.
The screen is
too bright or too
dark.
The screen is
shaking.
Check if there are any sources of strong magnetic fields such as TV,
speakers, etc. nearby.
If yes, remove them from the area of the monitor or change the position/
direction of the monitor to avoid magnetic field interference.
The power voltage is within the specification of the monitor.
The signal timing of the computer is within the specification of the
monitor.
Moiré correction is working properly.
C
D
The video output level of the computer is within the specification of the
monitor.
The screen may be too bright due to the video output level difference of
the computer. In this case, adjust the Contrast.
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1.
Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following charts if you cannot find an appropriate adjustment item in OPERATING
THE MONITOR or if the problem persists.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
3.
Problem Check
The picture does
not appear.
(Power indicator
does not light up.)
The Power Cable is firmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
o
o
o
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the
monitor.
The screen is not
synchronized.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the
monitor.
The video output level of the computer is within the specification of the
monitor.
A
B
(Power indicator
is green.)
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the
monitor.
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
E
(Power indicator
is orange.)
See page 15 for SELF-DIAGNOSIS FUNCTION.
See page 15 for SELF-DIAGNOSIS FUNCTION.
TROUBLE SHOOTING 16
All manuals and user guides at all-guides.com
ENGLISH
Normal phenomenon on ‘Diamondtron U3-CRT’ monitors
Misalignment of Aperture Grille
Due to the nature of the Diamondtron U3-CRT, in rare cases, a misalignment of the aperture grille
may happen by the shock or vibration caused during transportation. If a black vertical line appears
on the screen, apply a light shock to the side of the monitor with your hand. If the problem persists,
follow the procedure below.
Display a full white picture and inspect the problem area.
Display a high-white picture that covers the problem area to shoot a strong electron beam.
Leave it for a while, until the problem disappears.
Damper Wires
The two faint horizontal lines that may be visible on the screen are actually the shadows of steel
wires called
Damper Wires. All Diamondtron U3-CRT based monitors have these wires for structural
reasons.
A
B
Problem Check
No sound.
o The Audio Cable is properly connected.
o The audio output level of the audio equipment is within the specification of
the monitor.
F
o
The audio equipment (computer etc.) is ON.
o If the headphone is connected, disconnect it.
o
The Volume is turned up.
The sound is too
loud or too quiet.
G
o The audio output level of the audio equipment is within the specification of
the monitor.
A strange noise is
heard.
H
o
The Audio Cable is properly connected.
17 TROUBLE SHOOTING
All manuals and user guides at all-guides.com
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

iiyama Vision Master Pro 514 HM204DT A Manuale utente

iiyama
Marca
iiyama
Modello
Vision Master Pro 514 HM204DT A
Categoria
Monitora CRT
Tipo
Manuale utente
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti