Candy EVO 9143D/1-80 Manuale utente

Marca: Candy

Modello: EVO 9143D/1-80

Categoria: Lavatrici

Tipo: Manuale utente

Washing machine Instructions for use

Introduction

Please read these instructions for use carefully and all other information enclosed with the

washing machine.

Keep all documentation in a safe place for future reference or for any future owners.

This appliances is intended to be used in household and

similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

A different use of this appliance from household environment or from typical housekeeping

functions, as commercial use by expert or trained users, is excluded even in the above

applications.

If the appliance is used in a manner inconsistent with this it may reduce the life of the

appliance and may void the manufacturer’s warranty.

Any damage to the appliance or other damage or loss arising through use that is not

consistent with domestic or household use (even if located in a domestic or household

environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

Notes on disposal

All packaging material used is environmentally-friendly and recyclable. Please help dispose of

the packaging via environmentally-friendly means.

Your supplier or local council will be able to give you

details of current means of disposal.

Valuable materials can be salvaged from an old appliance via scrap reprocessing.

Note: pull out the mains plug from any old appliance.

Cut the power cable and dispose of it, together with the

plug.

When disposing of an old washing machine, please ensure that the door lock is rendered

inoperable to prevent children shutting themselves in the appliance.

Contents Page

Introduction 2

General delivery notes 4

Safety notes 4

Quick start 5

Description of controls 6

Programme Table 14

Programme selector 16

Detergent drawer 18

Detergents, washing aids and amounts to use 19

Useful advice for the user 21

The main wash 22

Cleaning and routine maintenance 24

Investigating malfunctions 26

Technical data 27

Setting up + installation 28

BEFORE SWITCHING ON THE APPLIANCE MAKE SURE

IT IS CORRECTLY INSTALLED AND THAT THE TRANSIT

BRACES ARE REMOVED AS SHOWN IN PAGE 28.

General delivery notes

Please check that the following items are delivered with the appliance:

- Instruction manual

- Certificate of guarantee

- Inlet hose

Check that no damage has occurred during transit, and if so, call your nearest Authorised

Technical Support Service agent.

Safety notes.

Note:

for cleaning or maintenance of the washing machine.

A) Pull out the plug

B) Turn off the tap

C) Candy equips all its appliances with earthing. Ensure that the mains supply is earthed,

and if it is not, seek assistance from a qualified person.

D) Do not touch the appliance when hands or feet are wet or damp. Do not use the appliance

with bare feet.

E) The use of adapters, multiple connectors and/or extensions is not recommended.

Note:

water temperature can reach 90°C during the wash cycle.

F) Check there is no water left in the drum before opening the door.

G) This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

H) Do not pull the power cable or the appliance itself to remove the plug from the socket.

I) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)

L) When moving the appliance never lift it by the controls or by the detergent drawer.

When in transit never rest the door against the trolley or transport the appliance without

the polystyrene base.

M) N.B!

If the appliance is installed on a carpeted floor ensure that the ventilation holes on the

base of the appliance are not obstructed.

N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do

not tamper with the appliance.

Consult only the Authorised Technical Support Service for possible repair and ask them to

use original spare parts.

Failure to comply with the above can compromise the safety of the appliance.

O) If the appliance’s power cable should ever need replacing, consult the Authorised

Technical Support Service

Quick start

Washing

- Open the door by using the handle “A” (Fig. 1, page 6)

- Select laundry and put it in the machine

- Close the door

- Put detergent in the compartments as indicated in the programme guide in this instruction

manual

- Select programme

- The display will show the settings for the programme selected.

- Adjust the wash temperature if necessary.

Press additional function buttons (if required)

- Press the “Start/Pause” button (page 8)

- The programme starts.

After washing

- The word “End” will appear on the display.

- Wait for the door lock to be released

(about 2 minutes after the programme has finished).

The “Door Security” indicator light will go out.

- Switch off the washing machine by turning the

selector to “OFF” position.

- Open the door and remove the laundry.

Ensure that the machine is correctly installed in line with the instructions found on page 28.

Description of controls

Door handle A

"Door Security" indicator light B

"Start/Pause" button C

"Fast Iron" button D

"Temperature Selection" button E

"Delay Start" button F

"Allergy Care" button G

"Spin Selection" button I

Digital Display L

"Stain level" button M

Programme selector with "OFF" position N

Buttons indicator light O

Detergent drawer P

Fig. 1

H G F E D C

Stain

Blaster

Delicates

Rapid

14-30-44 Min

Cotton + Pre

OFF

Wool

Hand

Mixed

Wool

"Stain Blaster" button H

“Kg DETECTOR”

(Function active only on Cotton and Synthetics programmes)

Through every wash phase “Kg DETECTOR” allows to monitor information on the wash load

in the drum.

So, as soon as the “Kg DETECTOR” is set in motion, in the first 4 minutes of the wash, it:

- adjusts the amount of water required

- determines the length of the wash cycle

- controls rinsing

according to the type of fabric selected to be washed it:

- adjusts the rhythm of drum rotation for the type of fabric being washed

- recognises the presence of lather, increasing, if necessary, the amount of water during rinsing

- adjusts the spin speed according to the load, thus avoiding any imbalance.

In this way “Kg DETECTOR” is able to decide, by itself, the most suitable programme for each

individual wash from the hundreds of possible wash combinations.

“Kg DETECTOR” meets the need for easy use by permitting a simplified programme

selection. Infact, the user need only tell the machine the type of fabric in the drum and the

degree of soiling, to obtain a perfect wash with the highest level of drying possible with a spin

which really cares for your clothes.

“START/PAUSE” button

Press to start the selected cycle .

Changing the settings after the programmes has started (PAUSE)

Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the

options buttons and time remaining indicator will show that the machine has been paused,

adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.

If you wish to add or remove items during washing, wait 2 minutes until the safety device

unlocks the door.

When you have carried out the manoeuvre, close the door, press "Start/Pause" button and

the appliance will continue working where it left off.

CANCELLING THE PROGRAMME

To cancel the programme, set the selector to the OFF position.

Select a different programme.

Re-set the programme selector to the OFF position.

Door handle

To open the door turn the handle as shown in the picture.

A special safety device prevents the door from being opened

immediately after the end of the cycle.

Wait for 2 minutes after the wash cycle has finished and the “Door

Security” light has gone out before opening the door. At the end of

the cycle turn the programme selector to "OFF" .

DOOR SECURITY indicator light

The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.

When "Start/Pause" is pressed on the machine with the door closed the indicator will flash

momentarily and then illuminate.

If the door is not closed the indicator will continue to flash.

A special safety device prevents the door from being opened immediately after the end of the cycle.

Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out

before opening the door. At the end of the cycle turn the programme selector to "OFF" .

NOTE:

Few seconds after the start the wash cycle will begin. During the first 4

minutes of the wash cycle, the kg detector (active only on cotton and

synthetics programmes) will weigh the clothes and update the maximum

wash time remaining on the display every five seconds until the weight

has been determined.

While this function is operating the “kg detector” indicator is on.

The option buttons should be selected before pressing

the "Start/Pause" button.

“TEMPERATURE SELECTION” button

When a programme is selected the relevant indicator will light up to show the recommended

wash temperature. The Temperature button can be used to decrease or increase the

temperature of your chosen wash cycle. Each time the button is pressed, the new

temperature level is shown on the Wash Temperature Indicator.

“FAST IRON” button

The Fast Iron function (Not available on COTTON programmes) minimizes creases as much

as possible with a uniquely designed anti-crease system that is tailored to specific fabrics.

MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no

spinning and then a delicate spin assures the maximum relaxation of the fabrics.

DELICATE FABRICS – after the final two rinses with no spinning the machine stops in the

final rinse stage and the option indicators blink. The load is held in the water in the drum,

thus reducing creasing and enabling easier ironing.

WOLLENS/HAND WASH – after the final rinse the load is held in the water in the drum,

thus reducing creasing and enabling easier ironing and the option indicators blink.

To complete the cycle press the Fast Iron button and the machine will pump out the water

and complete the cycle.

If you do not want to spin the clothes and activate drain only:

- Turn the programme selector to the "OFF" position;

- Select programme drain only ;

- Switch on the appliance again by pressing the "Start/Pause" button.

If you want carry out a cold wash, all the indicators must be off.

“DELAY START” button

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up

to 24 hours.

To delay the start use the following procedure:

Set the required programme.

Press the button once to activate it (h00 appears on the display) and then press it again to set

a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time

the button is pressed, until h24 appears on the display, at which point pressing the button

again will reset the delay start to zero.

Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The

countdown will begin and when it has finished the programme will start automatically.

It is possible to cancel the delay start by taking the following action:

Press and hold the button for 5 seconds until the display will show the settings for the

programme selected.

At this stage it is possible to start the programme previously selected by pressing the

“START/PAUSE” button or to cancel the process by setting the selector to the OFF position

and then selecting another programme.

Warning: If there is any break in the power supply while

the machine is operating, a special memory stores the

selected programme and, when the power is restored, it

continues where it left off.

“ALLERGY CARE” button

By pressing this button you can activate a special new wash cycle in the Cotton and Mixed

Fabrics programs, thanks to the new Sensor Activa System. This option treats with care the fibres

of garments and the delicate skin of those who wear them.

The load is washed in a much larger quantity of water and this, together with the new combined

action of the drum rotation cycles, where water is filled and emptied, will give you garments which

have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that

the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also

increased during the rinse procedure so as to remove all traces of detergent from the fibres. This

function has been specifically designed for people with delicate and sensitive skin, for whom even

a very small amount of detergent can cause irritation or allergy.

You are advised to also use this function for children’s clothing and for delicate fabrics in general,

or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of

detergent. To ensure the best performance for your wash, this function is always activated on the

Delicates and Woollens/Hand wash programs.

“STAIN BLASTER” button

“SPIN SELECTION” button

The spin cycle is very important to remove as much water as possible from the laundry without

damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.

By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle

can be cancelled.

To reactivate the spin cycle press the button until you reach the spin speed you would like to set.

To prevent damage to the fabrics, it is not possible to increase the speed over that which is

automatically suitable during the selection of the program.

It is possible to modify the spin speed without to pausing the machine.

Note:

The machine is fitted with a special electronic device, which

prevents the spin cycle should the load be unbalanced.

This reduces the noise and vibration in the machine and so

prolongs the life of your machine.

“DIGITAL” Display

The display’s indicator system allows you to be constantly informed about the status of the

machine:

1) WASH TEMPERATURE

When a programme is selected the relevant indicator will light up to show the recommended

wash temperature. The Temperature button can be used to decrease or increase the

temperature of your chosen wash cycle. Each time the button is pressed, the new

temperature level is shown on the Wash Temperature Indicator.

4 6

{

By pressing this button,which can only be activated in the Cotton cycles, the sensors

in the new Sensor system come into operation. They affect both the selected

temperature, keeping it at a constant level throughout the wash cycle, and the

mechanical function of the drum.

The drum is made to turn at two different speeds at crucial moments.When the

detergent enters the garments, the drum rotates in such a way that the detergent is

distributed in a uniform manner; during the wash and rinse procedures, however, the

speed increases in order to maximise the cleaning action. Thanks to this special

system, the efficiency of the wash procedure is improved WITHOUT ANY INCREASE

IN THE LENGTH OF THE PROGRAM.

By pressing this button,which can only be activated in the Cotton cycles, the sensors in the new Sensor system come into

operation. They affect both the selected temperature, keeping it at a constant level throughout the wash cycle, and the

mechanical function of the drum.

The drum is made to turn at two different speeds at crucial moments.When the detergent enters the garments, the drum rotates in

such a way that the detergent is distributed in a uniform manner; during the wash and rinse procedures, however, the speed

increases in order to maximise the cleaning action. Thanks to this special system, the efficiency of the wash procedure is

improved WITHOUT ANY INCREASE IN THE LENGTH OF THE PROGRAM.

By pressing this button,which can only be activated in the Cotton cycles, the sensors in

the new Sensor system come into operation. They affect both the selected temperature,

keeping it at a constant level throughout the wash cycle, and the mechanical function of

the drum.

The drum is made to turn at two different speeds at crucial moments.When the

detergent enters the garments, the drum rotates in such a way that the detergent is

distributed in a uniform manner; during the wash and rinse procedures, however, the

speed increases in order to maximise the cleaning action. Thanks to this special

system, the efficiency of the wash procedure is improved WITHOUT ANY INCREASE IN

THE LENGTH OF THE PROGRAM.

By pressing this button,which can only be activated in the Cotton cycles, the sensors in

the new Sensor system come into operation. They affect both the selected temperature,

keeping it at a constant level throughout the wash cycle, and the mechanical function of

the drum.

The drum is made to turn at two different speeds at crucial moments.When the detergent

enters the garments, the drum rotates in such a way that the detergent is distributed in a

uniform manner; during the wash and rinse procedures, however, the speed increases in

order to maximise the cleaning action. Thanks to this special system, the efficiency of

the wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE

PROGRAM.

If you want carry out a cold wash, all the indicators must be off.

2) DOOR LIGHT

Once the START/PAUSE button has been pressed the light first flashes then stops flashing

and remains on until the end of the wash.

2 minutes after the end of the wash the light goes off to show that the door can now be

opened.

3) SPIN SPEED

Once the programme has been selected, the maximum spin speed allowed for that

programme appears on the display. Pressing the spin button will reduce the speed by 100

rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is

possible to omit the spin by pressing the spin button repeatedly.

4) DELAY START LIGHT

This flashes when delay start has been set.

5) WASH CYCLE TIME

When a programme is selected the display automatically shows the maximum cycle duration

for a full load, which can vary, depending on the options selected. Once the programme has

started you will be kept informed constantly of the time remaining to the end of the wash.The

appliance calculates the time to the end of the selected programme based upon a standard

loading, during the cycle, the appliance corrects the time to that applicable to the size and

composition of the load.

6)Kg DETECTOR Indicator

Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent

sensor will weigh the laundry and adjust the cycle time, water and electricity consumption

accordingly.

7) STAIN LEVEL

Once the programme has been selected the indicator light will automatically show the stain

level set for that programme. Selecting a different stain level the relevant indicator will light

up.

“STAIN LEVEL” button

By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is a

choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.

Once the programme has been selected the indicator light will automatically show the stain level

set for that programme. Selecting a different stain level the relevant indicator will light up. For

example: Using this button on the Rapid Wash cycle will enable you to select either a 14, 30 or 44

minute wash cycle.

PROGRAMME selector with "OFF" position

When the programme selector

is turned the display lights up to

show the settings for the

programme selected.

N.B. To switch the machine off,

turn the programme selector to

the “OFF” position.

Today, most detergents have been improved to wash efficiently at

lower temperatures, therefore we have set the default

temperature settings of each programme to a lower level, saving

electricity and reducing the carbon footprint of your machine.

You can select an high temperature by pressing the temperature

button.

Please refer to the programme guide for the maximum

temperature to which each programme can be set.

Press the "Start/Pause" button to start the selected cycle.

Once a programme is selected the programme selector remains stationary on the selected

programme till cycle ends.

Switch off the washing machine by turning the selector to "OFF".

Note:

The programme selector must be returned to the "OFF" position

at the end of each cycle or when starting a subsequent wash

cycle prior to the next programme being selected and started.

Buttons indicator light

These light up when the relevant buttons are pressed.

If an option is selected that is not compatible with the selected programme then the light on

the button first flashes and then goes off.

CHAPTER 7

TABLE OF PROGRAMMES

●●●

●●

●

●●

Up to:

90°

Up to:

60°

Up to:

60°

Up to:

40°

Up to:

40°

Up to:

40°

Up to:

40°

Up to:

40°

Up to:

30°

Up to:

40°

60°

40°

30°

40°

30°

20°

RECOMMENDED

TEMP.

°C

Resistant fabrics

Cotton, linen

with Prewash

Cotton, mixed

resistant,

Coloureds

Mixed fabrics and synthetics

Cotton, mixed fabrics, synthetics

Resistant fabrics

Mixed fabrics and synthetics

Rapid 14 minute

Resistant fabrics

Mixed fabrics and synthetics

Rapid 30 minute

Resistant fabrics

Mixed fabrics and synthetics

Rapid 44 minute

Rinse

Fast spin

Drain only

Very delicate fabrics

“MACHINE WASHABLE”

woollens

Hand wash

CHARGE DETERGENT

PROGRAMME

SELECTOR ON:

PROGRAM FOR:

WEIGHT

MAX

MAX TEMP.

°C

Cotton + Pre

Mixed

Delicates

3,5

1,5

2,5

3,5

2,5

1,5

4,5

1,5

2,5

3,5

2,5

1,5

EcoMix 20°

Please read these notes

* Maximum load capacity of dry clothes, according to the model used (see rating plate).

** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and

No 1061/2010

COTTON PROGRAMME with a temperature of 60°C

COTTON PROGRAMME with a temperature of 40°C

These programmes are suitable to clean normally soiled cotton laundry and they are the most

efficient programmes in terms of combined energy and water consumptions for washing cotton

laundry.

These programmes have been developed to be compliant with the temperature on the wash

label on the garments and the actual water temperature may slightly differ from the declared

temperature of the cycle.

The spin speed may also be reduced,to match any guidelines suggested on the fabric

label, or for very delicate fabrics cancel the spin completely this option is available with a

spin speed button.

Pressing the wash temperature button makes it possible to wash at any temperature

below the maximum allowed.

1) For the programmes shown you can adjust the duration and intensity of the wash using

the stain level button.

2) Using the stain level button on the Rapid cycle will enable you to select either a 14,

30 or 44 minute wash cycle.

Delicates

Rapid

14-30-44 Min

Cotton + Pre

OFF

Wool

Hand

Mixed

Wool

PROGRAMMES

For the various types of fabrics and various degrees of dirt the

washing machine has different programme bands according

to: wash cycle, temperature andlenght of cycle (see table of

washing cycle programmes).

RESISTANTS FABRICS

The programmes have been designed for a maximum wash

and the rinses,with spin intervals, ensure perfect rinsing.The

final spin gives more efficient removal of water.

MIXED AND SYNTHETIC FABRICS

The main wash and the rinse gives best results thanks to the

rotation rhythms of the drum and to the water levels.

A gentle spin will mean that the fabrics become less creased.

RAPID PROGRAMME

The Rapid programme allows a washing cycle to be

completed in just 14 minutes! This programme is particularly

suited to slightlydirty cottons and mixed fabrics.

enable you to select either a 14, 30 or 44 minute wash

cycle.When selecting the rapid programme, please note that

we recommend you use only 20% of the recommended

quantities shown on the detergent pack. For information

about these programmes please refer to

the programmes table.

SELECTION

SPECIAL “RINSE” PROGRAMME

This programme carries out three rinses with a intermediate spin

(which can be reduced or excluded by using the correct button).

It can be used for rinsing any type of fabric, eg. use after hand-

washing.

Cotton + Pre

Mixed

Using the

button on the Rapid cycle will

stain level

SPECIAL “FAST SPIN” PROGRAMME

Programme “FAST SPIN” carries out a maximum spin

(which can be reduced by using the correct button).

DRAIN ONLY

This programme drains out the water.

SPECIAL DELICATE FIBRES

This is a new wash cycle which alternates washing

and soaking and is particularly recommended

for very delicate fabrics. The wash cycle and rinses are

carried out with high water levels to ensure best results.

WOOLMARK PROGRAMME

A programme dedicated to washing fabrics labelled

with the woolmark . The cycle comprises of alternate

periods of activity and pauses. The programme has a

maximum temperature of 40° and concludes with 3

rinses and a short spin.

SPECIAL “HAND WASH”

This washing machine also has a gentle Hand Wash

programme cycle. This programme allows a complete

washing cycle for garments specified as “Hand Wash

only” on the fabric care label. The programme has a

temperature of 30°C and concludes with 3 rinses and a

slow spin.

Delicates

EcoMix

20°

This innovative programme,

allows you to wash different

fabrics and colours

together,such as cottons,

synthetics and mixed fabrics

at only 20°C and provides

an excellent cleaning

performance.

Consumption on this

program is about 40% of a

conventional 40°C.cottons

wash.

"EcoMix"PROGRAMME

Detergent drawer

The detergent drawer is split into 3 compartments:

- the compartment labelled "1" is for prewash detergent;

- the compartment labelled " " is for special additives,

fabric softeners, fragrances, starch, brighteners etc;

- the compartment labelled "2" is for main wash

detergent.

NOTE:

Some Detergents are Difficult to

utilise. Ensure to use an in drum

dispenser if recommended by

the detergent Manufacturer.

Note: only put liquid products in the compartment

labelled “ ”. The machine is programmed to

automatically take up additives during the final rinse

stage for all wash cycles.

Detergents, washing aids and amounts to use

Choice of detergent

General purpose detergents

- Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for

use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.

- Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,

cosmetics and oil.

These detergents are not suitable for washing stained laundry, as they do not contain

bleach.

- Biological detergents, not all the products available give a really thorough wash.

Additional laundry aids

- Water softener, means less detergent can be used where water hardness is classed as

hard to very hard.

- Prewash substances, for the programmed treatment of stains prior to the main wash.

Using them means the subsequent wash can be at a low temperature or with bleach-free

detergents.

- Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.

If you own a tumble dryer, clothes are softened even without the use of a fabric softener.

Do not put solvents in the washing machine!

Keep detergents and other laundry products out of children’s reach.

Before pouring in the detergent check that there are no foreign bodies in the detergent

drawer.

Dosage details are usually shown on the detergent packaging. Follow those instructions.

Dosages

Only use detergents which are suitable for use in a washing machine.

You will obtain the best results from your wash with the minimum use of chemical products

and the best care for your laundry if you take into consideration the degree of soiling as well

as the type of detergent to choose.

The amount of detergent to use depends on:

- water hardness: depending on the hardness of the water and the type of detergent used, it

is possible to reduce the amount of detergent.

- the degree of soiling: it is possible to reduce the amount of detergent used depending on

the degree of soiling.

- amount of laundry: it is possible to reduce the amount of detergent when washing only a

small amount of laundry.

Dosage for powder detergent

For normal and low concentration detergents: for normally soiled laundry choose a

programme without prewash.

Put the detergent in compartment “2” of the drawer.

For heavily soiled laundry, choose a programme with prewash.

Put 1/4 of the detergent in compartment “1”, 3/4 in compartment “2” of the drawer.

When using water softeners, first put in the detergent, then add the softener to compartment “2”.

For highly concentrated detergents not in single dose format, follow what is shown on pack

exactly as regards type and amount of dosage.

To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids

provided in the detergent packaging.

Liquid detergent dosage

Liquid detergents may be used in accordance with the instructions on the relevant

packaging, for all programmes without prewash, by using the special container which is

placed in the drum or, for those models that have it, in the special insert for liquid detergents.

La pagina sta caricando ...

Candy EVO 9143D/1-80 Manuale utente

Marca: Candy

Modello: EVO 9143D/1-80

Categoria: Lavatrici

Tipo: Manuale utente

Scarica il pdf

rapporto

Candy EVO 9143D/1-80 Manuale utente

Candy EVO 9143D/1-80 Manuale utente

Documenti correlati

Altri documenti