Pioneer X-CM32BT-W Manuale utente

Categoria
Ricevitori multimediali per auto
Tipo
Manuale utente
X-CM32BT
-K/-W/-R/-L/-N/-D/-Y
CD Receiver System | Micro chaîne CD | CD-Receiversystem |
Sistema CD con amplificatore | CD Receiver System |
Sistema receptor de CD | Система ресивера CD
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Istruzioni per l’uso
Handleiding
Manual de instrucciones
Инструкции по эксплуатации
Discover the benefits of registering your product online at
http://www.pioneer.co.uk
(or http://www.pioneer.eu).
Découvrez les nombreux avantages offerts en enregistrant
votre produit en ligne maintenant sur
http://www.pioneer.fr
(ou http://www.pioneer.eu).
Bitte nutzen Sie die Möglichkeit zur Registrierung Ihres
Produktes unter
http://www.pioneer.de
(oder
http://www.pioneer.eu)
Registra il tuo prodotto su
http://www.pioneer.it
(o
http://www.pioneer.eu) e scopri subito quali vantaggi puoi
ottenere!
Ontdek nu de voordelen van online registratie! Registreer uw
Pioneer product via
http://www.pioneer.nl -
http://www.pioneer.be
(of http://www.pioneer.eu)
Registre su producto en
http://www.pioneer.es
(o en
http://www.pioneer.eu) Descubra los beneficios de
registrarse on-line:
Зарегистрируйт е Baшe изделие на
http://www.pioneer-rus.ru
(или http://www.pioneer.eu).
Oзнакомьт есь с преимуществами регистрации в Интернет
X-CM42BT
-K/-W/-R/-L
;&0B6<;(B&RYHUB$QNLIP࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸲᭶㸰㸶᪥ࠉ᭶᭙᪥ࠉ༗๓㸯㸯᫬㸱㸳ศ
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period. K041_A1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 25 cm at top, 15 cm at rear, and 5 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
D3-4-2-1-1_B1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Information for users on collection and disposal of old equipment and used batteries
These symbols on the products, packaging, and/or accompanying documents mean
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
K058a_A1_En
Symbol examples
for batteries
Symbol for
equipment
Pb
Radio wave caution
This unit uses a 2.4 GHz radio wave frequency, which is
a band used by other wireless systems (Microwave
ovens and Cordless phones, etc.). In this event noise
appears in your television image, there is the possibility
this unit (including products supported by this unit) is
causing signal interference with the antenna input
connector of your television, video, satellite tuner, etc. In
this event, increase the distance between the antenna
input connector and this unit (including products
supported by this unit).
Pioneer is not responsible for any malfunction of the
compatible Pioneer product due to communication
error/malfunctions associated with your network
connection and/or your connected equipment.
Please contact your Internet service provider or
network device manufacturer.
A separate contract with/payment to an Internet
service provider is required to use the Internet.
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
4
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model properly. After you
have finished reading the instructions, put them in a safe place for future reference.
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Loading the batteries in the remote control . . . . . . . . . . . . .5
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . 5
02 Part names and functions
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Speaker system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Detatching and replacing the front grille . . . . . . . . . . . . . . .7
Attaching the Non-skid pads . . . . . . . . . . . . . . . . . . . . . . 8
Rotating the Speaker Badge. . . . . . . . . . . . . . . . . . . . . . . 8
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Top panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
03 Connections
Speaker connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Using external antennas . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
04 Getting started
To turn the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Input function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display brightness control . . . . . . . . . . . . . . . . . . . . . . . 13
Volume auto set-in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Volume control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Muting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Sound controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Equalizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
P.bass control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Bass/treble control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Calling the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . . 15
Cancelling the wake-up timer. . . . . . . . . . . . . . . . . . . . . 15
Using the wake-up timer. . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
05 iPod/iPhone/iPad playback
Confirming what iPod/iPhone/iPad models are
supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connecting your iPod/iPhone/iPad . . . . . . . . . . . . . . . . . . .16
Connecting iPod/iPhone to the top panel
(X-CM42BT only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Close the iPod/iPhone connector port
(X-CM42BT only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting iPod/iPhone/iPad using supplied stand
. . . 17
Playing iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Playing iPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
06 Disc playback
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . . .20
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Programmed play (CD or MP3/WMA) . . . . . . . . . . . . . . 21
About downloading MP3/WMA . . . . . . . . . . . . . . . . . . . 21
About folder playback order . . . . . . . . . . . . . . . . . . . . . . 21
Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 22
Switch the display contents . . . . . . . . . . . . . . . . . . . . . . 22
07 USB playback
Playing USB storage devices . . . . . . . . . . . . . . . . . . . . . . . . 23
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 24
Switch the display contents . . . . . . . . . . . . . . . . . . . . . . 24
Playing in the desired order (Programmed Play) . . . . . . . . 24
08 Using the tuner
Listening to the radio broadcasts . . . . . . . . . . . . . . . . . . . . . 25
Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Saving station presets. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
To recall a memorised station . . . . . . . . . . . . . . . . . . . . 26
To scan the preset stations. . . . . . . . . . . . . . . . . . . . . . . 26
To erase entire preset memory. . . . . . . . . . . . . . . . . . . . 26
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . . . 26
An introduction to RDS. . . . . . . . . . . . . . . . . . . . . . . . . . 26
Searching for RDS programs. . . . . . . . . . . . . . . . . . . . . 26
Information provided by RDS . . . . . . . . . . . . . . . . . . . . . 27
Using the Auto Station program Memory (ASPM). . . . 27
Notes for RDS operation. . . . . . . . . . . . . . . . . . . . . . . . . 27
09 Other connections
Connecting auxiliary components . . . . . . . . . . . . . . . . . . . . 28
10
Bluetooth
®
Audio playback
Music playback using Bluetooth wireless technology . . . . 29
Remote control operation . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Pairing with the unit (Initial registration) . . . . . . . . . . . . . . 29
Listen to music on the unit from a Bluetooth capable
device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
BT STANDBY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Radio wave caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Scope of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Radio wave reflections . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Precautions regarding connections to products
supported by this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
11 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Playable discs and formats . . . . . . . . . . . . . . . . . . . . . . . . . .34
Regarding copy protected CDs . . . . . . . . . . . . . . . . . . . 34
Supported audio file formats . . . . . . . . . . . . . . . . . . . . . 34
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
When moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Do not place objects on this unit . . . . . . . . . . . . . . . . . . 35
About condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cleaning the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cleaning the lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
About specially shaped discs. . . . . . . . . . . . . . . . . . . . . 36
About iPod/iPhone/iPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Auto power off setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Restoring all the settings to the defaults . . . . . . . . . . . . . . . 36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Before you start 01
5
En
English
Français Español
Chapter 1:
Before you start
What’s in the box
Please confirm that the following accessories are in the box
when you open it.
Remote Control
AAA batteries (R03) x 2
•Power cord
Speaker wire x 2
AM antenna cable
FM wire antenna
Non-skid pads x 8
iPhone/iPad stand
Warranty card
Operating instructions (this document)
Loading the batteries in the
remote control
1 Open the rear lid and load the batteries as
illustrated below.
2 Close the rear lid.
CAUTION
Do not use any batteries other than the ones specified.
Also, do not use a new battery together with an old one.
When inserting the batteries, make sure not to damage
the springs on the battery’s terminals. This can cause
batteries to leak or over heat.
When loading the batteries into the remote control, set
them in the proper direction, as indicated by the polarity
marks ( and ).
Do not heat batteries, disassemble them, or throw them
into flames or water.
Batteries may have different voltages, even if they are the
same size and shape. Do not use different types of
batteries together.
To prevent leakage of battery fluid, remove the batteries
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert
new batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large quantities
of water.
When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
Using the remote control
The remote has a range of about 7 m at an angle of about 30º
from the remote sensor.
Keep in mind the following when using the remote control:
Make sure that there are no obstacles between the
remote and the remote sensor on the unit.
Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the unit’s
remote sensor.
Remote controllers for different devices can interfere
with each other. Avoid using remotes for other
equipment located close to this unit.
Replace the batteries when you notice a fall off in the
operating range of the remote.
STANDBY/ON
CD
USB TUNER
A
U
DIO IN
iPod
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO
ASPM
PTY DISPLAY
+
MUT
E
TUN
E
TUNE+
DIMMER


+
MEMO
R
Y
/PROGRAM
123
456
78
9
0
B
T
AU
DIO
CLOCK/TIMER
SLEEP
EQUALIZER
P.BASS
BA
SS
/TREBLE
RANDOM
C
LEAR
RE
PE
AT
OPE
N/CL
OSE
RDS
ENTER
OPTION
30°
7 m
30°
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Part names and functions02
6
En
Chapter 2:
Part names and functions
Remote control
1 1 STANDBY/ON
Switches the receiver between standby and on (page 19).
2 Input function buttons
Use to select the input source to this receiver (page 19).
iPod (X-CM42BT only)
Use to switch between the iPod controls and the receiver
controls (page 16).
BT AUDIO
Use to set up or play the audio file using the Bluetooth
network (page 29).
3 CD Receiver control buttons
CLOCK/TIMER
Use for setting the clock, as well as for setting and
checking the timers (page 13).
SLEEP
See Using the sleep timer on page 15.
4 Numeric buttons (0 to 9)
Use to enter the number (page 20).
5
CLEAR
Use to clear the programmed play (page 21).
6 CD Receiver control buttons
DISPLAY
Press to change the display for songs playing back from
CD or USB (page 22).
FOLDER
Use to select the folder of the MP3/WMA disc or USB
mass storage device (page 21).
MENU
Use to access the menu.
MEMORY/PROGRAM
Use to memory or program the MP3/WMA disc
(page 21).
7
F
/
G
/
H
/
I
(TUNE +/–), ENTER
Use to select/switch system settings and modes, and to
confirm actions.
Use TUNE +/– can be used to find radio frequencies
(page 25).
8 PRESET control buttons
Use to select preset radio stations (page 25).
9
MUTE
Mutes/unmutes the sound (page 13).
4
5
1
3
2
6
7
8
12
17
13
14
9
10
11
16
15
STANDBY/ON
CD USB TUNER
AUDIO IN
iPod
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO
+
MUTE
TUNE–
TUNE+
DIMMER

+
MEMORY
/PROGRAM
123
456
789
0
BT AUDIO
CLOCK/TIMER
SLEEP
EQUALIZER
P. BAS S
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
ASPM PTY DISPLAY
RDS
ENTER
OPTION
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Part names and functions 02
7
En
English
Français Español
10 Playback control buttons
Use to control each function after you have selected it using
the input function buttons (page 19).
11
Tuner
control buttons
ST/MONO
Use to switch the sound mode between stereo and
monaural. (page 25)
RDS ASPM
Use to search for RDS Auto station program memory
(page 26).
RDS PTY
Use to search for RDS program types (page 26).
RDS DISPLAY
Press to change the RDS display for information mode
(page 26).
12 OPEN/CLOSE
Use to open or close the disc tray (page 19).
13 Sound control buttons
Adjust the sound quality (page 14).
14 RANDOM
Press to randomize order play setting from a CD, iPod or USB
(page 20).
15
REPEAT
Press to change the repeat play setting from a CD, iPod or
USB (page 20).
16 Volume control buttons
Use to set the listening volume (page 13).
17
DIMMER
Dims or brightens the display. The brightness can be
controlled in four steps (page 13).
Speaker system
1 Tweeter
2Woofer
3 Bass Reflex Duct
4 Speaker Terminals
Important
Speaker grille can be removed.
Make sure nothing comes into contact with the speaker
diaphragms when you remove the speaker grilles.
Both speakers can be used on either the right or the left
side.
Detatching and replacing the front
grille
The front grille of this speaker system is removable. Proceed
as follows:
1 Grab the bottom of the grille, and gently
pull it toward you to remove the bottom
portion.
2 Next, grab the top part of the grille and
gently pull it toward you to remove the top
portion.
To install the grille, align the projections on the speaker with
the receptacles on the top and at the base of the grille and
push them into place.
3
2
1
4
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Part names and functions02
8
En
Attaching the Non-skid pads
Apply the accessory non-skid pads to the bottom surfaces of
the speakers.
Important
Use the speaker is usually in an upright position.
When placing speakers upright
When placing the speakers vertically upright, attach the non-
skid pads to the bottom surface of the speakers.
When placing speakers horizontally
When placing the speaker horizontally, attach the non-skid
pads to what will be the bottom surface of the speakers.
Rotating the Speaker Badge
The grill frame speaker badge can be rotated. Operate as
follows.
1 Grasp the speaker badge (1), pull forward
(2), and turn left (3).
The speaker badge will rotate.
If the speaker badge does not rotate doing the above step 1,
try the following steps 2 to 3.
2 Detach the speaker grill.
3 Rotate the screws on the backside of the grill
in a clockwise direction using a plus driver.
Important
Do not rotate the screw in a counter-clockwise direction
as it may cause the badge to fall off.
The bottom surface
of the speaker
The bottom surface of
the speaker when
using it horizontally
1
2
3
Backside of speaker grill
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Part names and functions 02
9
En
English
Français Español
Front panel
1Main display
2 Volume control
Use to set the listening volume (page 13).
3 Volume illumination
Light when the power on.
4 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
5 AUDIO IN socket
Use to connect an auxiliary component using a stereo
minijack cable (page 28).
6 Remote sensor
Receives the signals from the remote control.
7Disc tray
Place the disc, label side up (page 19).
8
TIMER
indicator
Lights when the receiver is power off with timer setting.
9 USB terminal
Use to connect your USB mass storage device or Apple iPod/
iPhone/iPad as an audio source (page 23).
TIMER VOLUME
PHONES AUDIO IN
4 5 6 7 8 9
2 31
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Part names and functions02
10
En
Top panel
1 iPod/iPhone connector port
(X-CM42BT only)
To connect the iPod/iPhone, press the PUSH OPEN tab
(page 17).
2
1 STANDBY/ON
Switches the receiver between standby and on (page 19).
3 Playback control buttons
Selects the desired track or file to be played back. Use to stop
the playback. Stops playback or resumes playback from the
pause point.
4 INPUT
Selects the input source.
Long press to change to BT STANDBY mode.
5 Disc tray open/close button
Use to open or close the disc tray (page 19).
STANDBY/ON

 
INPUT
PUSH OPEN
2 5
1
3 4
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Connections 03
11
En
English
Français Español
Chapter 3:
Connections
CAUTION
Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
Connect the power cord after all the connections
between devices have been completed.
Speaker connection
Push open the tabs and insert exposed wire.
The provided speaker wire with red tube is for the (+)
terminal. Connect the wire with red tube the (+)
terminal, and other wire to the (–) terminal.
Both speakers can be used on either the right or the left
side.
CAUTION
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
Do not connect any speakers other than those supplied
to this system.
Do not connect the supplied speakers to any amplifier
other than the one supplied with this system.
Connection to any other amplifier may result in
malfunction or fire.
Do not attach these speakers to the wall or ceiling.
They may fall off and cause injury.
Do not install your speakers overhead on the ceiling or
wall. The grill is designed to be detachable, and as
such it may fall and cause damage or personal injury if
installed overhead.
These speakers are magnetically shielded. However,
depending on the installation location, color distortion
may occur if the speaker system is installed extremely
close to the screen of a television set. If this happens,
turn off the television set, and then turn it on after 15 to
30 minutes. If the problem persists, move the speaker
system away from the television set.
Make sure that the speaker cable cores do not become
exposed and make contact with other cable cores. This
may cause malfunction of the product.
Do not allow the speaker cable core to come into contact
with the receiver body.
If the speaker cable core comes into contact with any
metal portion of the receiver’s body, it may damage the
speakers and cause smoke and fire.
Insert speaker cables securely into the terminals and
check that the cable does not come out of easily.
Note
There is no difference between L and R speakers.
AM
LOOP
ANTENNA
AC IN
LINE
IN
SPEAKERS
L
R
FM
UNBAL 75 Ω
R
L
Left
speaker
Right
speaker
This unit’s rear panel
Red tube
Supplied
speaker wire
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Connections03
12
En
Connecting antennas
Connect the AM loop antenna and the FM wire antenna
as shown below.
To improve reception and sound quality, connect
external antennas (see Using external antennas).
1 Connect the AM antenna wires.
Holding the connector to connect.
2 Fix the AM loop antenna to the attached
stand.
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
4 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve FM reception
Use a PAL connector (not supplied) to connect an external FM
antenna.
Plugging in
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
CAUTION
Do not use any power cord other than the one supplied
with this unit.
Do not use the supplied power cord for any purpose
other than that described above.
AM
LOOP
ANTENNA
FM
UNBAL 75 Ω
2
1
3
4
1
2
3
ANTENNA
FM
UNBAL 75 Ω
One-touch PAL
connector
75 :coaxial
cable
AC IN
LINE
IN
SPEAKERS
L
R
R
L
To AC outlet
This unit’s rear panel
Power cord
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Getting started 04
13
En
English
Français Español
Chapter 4:
Getting started
To turn the power on
Press the 1 STANDBY/ON to turn the power on.
After use:
Press the 1 STANDBY/ON to enter the power stand-by mode.
Note
In standby mode, if iPod/iPhone/iPad is connected, the
unit turns charge mode.
Setting the clock
1 Press
1 STANDBY/ON
to turn the power on.
2 Press
CLOCK/TIMER
on the remote control.
“CLOCK” is shown on the main display.
3 Press
ENTER
.
4 Press
HI
to set the day, then press ENTER.
5 Press
HI
to set the hour, then press
ENTER.
6 Press
HI
to set the minute, then press
ENTER to confirm.
7 Press
ENTER
.
To confirm the time display:
Press the CLOCK/TIMER. The time display will appear for
about 10 seconds.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
General control
Input function
When the INPUT on main unit is pressed, the current function
will change to different mode. Press the INPUT repeatedly to
select desired function.
Display brightness control
Press DIMMER to dims the display brightness. The
brightness can be controlled in four steps.
Volume auto set-in
If you turn off and on the main unit with the volume set to 31
or higher, the volume starts at 30 and sets in to the last set
level.
Volume control
Turn the volume knob towards VOLUME (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
CAUTION
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Muting
The volume is muted temporarily when pressing the MUTE on
the remote control. Press again to restore the volume.
STANDBY/ON
CD USB TUNER
AUDIO IN
iPod
123
BT AUDIO
CLOCK/TIMER
SLEEP
EQUALIZER
PBASS
OPEN/CLOSE
DISPLAY FOLDER
MENU
TUNE+
MEMORY
/PROGRAM
ENTER
CD FM AM USB/IPOD
IPODBT AUDIO AUDIO IN LINE
(X-CM42BT only)
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Getting started04
14
En
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
P.bass control
When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.
Bass/treble control
Press the BASS/TREBLE, then press HI to adjust the bass
or treble.
Note
•The EQUALIZER and P.BASS cannot operate
simultaneously. The most recently selected of these two
functions will be the one used.
BASS/TREBLE can operate alongside either the
EQUALIZER or P.BASS.
When one of the above two functions is
selected, the function that is not selected will
be displayed as follows.
1 When P.BASS setting (ON/OFF) is changed
EQUALIZER : FLAT
2 When EQUALIZER setting is changed
P.BASS : OFF
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
1Press
1 STANDBY/ON
to turn the power on.
2 Press and hold
CLOCK/TIMER
.
3Press
HI
to select “ONCE” or “DAILY”,
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
4Press
HI
to select “TIMER SET”, then
press ENTER.
5Press
HI
to select the timer playback
source, then press
ENTER
.
CD, FM, AM, USB/IPOD, IPOD (X-CM42BT only), BT AUDIO,
AUDIO IN and LINE can be selected as the playback source.
6Press
HI
to select the timer day, then
press ENTER.
7Press
HI
to set the hour, then press
ENTER.
8Press
HI
to set the minute, then press
ENTER.
Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press
VOLUME +/–
, then
press ENTER.
10 Press
1 STANDBY/ON
to enter the power
standby mode.
The TIMER indicator lights up.
NIGHT
FLAT A flat and basic sound
ACTIVE
DIALOGUE
A sound that can be enjoyed
at night even with lower volume
A powerful sound that
emphasizes low and high tones
A sound that allows the radio or
vocals to be heard more easily
B*HWWLQJBVWDUWHGB;&0IP࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸲᭶㸰㸶᪥ࠉ᭶᭙᪥ࠉ༗๓㸯㸯᫬㸶ศ
Getting started 04
15
En
English
Français Español
Calling the wake-up timer
It can be used to re-use an existing timer setting.
1 As well as steps 1 through 3 in “Setting the
wake-up timer”.
2 Press
HI
to select “TIMER ON”, then press
ENTER.
Cancelling the wake-up timer
It can be used to turn off the timer setting.
1 As well as steps 1 through 3 in “Setting the
wake-up timer”.
2 Press
HI
to select “TIMER OFF”, then
press ENTER.
Using the wake-up timer
1 Press
1 STANDBY/ON
to turn the power
off.
2 At the wake-up time, this unit will turn on
automatically and play the selected input
function.
Note
If at the wake-up time iPod/iPhone/iPad is not connected
to this unit or a disc is not inserted, this unit will be
turned to on and not play back the track.
Some discs may not be played automatically at the wake-
up time.
If you set the timer, take one minute or more between the
start and end time.
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
1 Press
SLEEP
repeatedly to select a switch off
time.
Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120
min, 150 min, 180 min or OFF. The newly set value displays for
3 seconds, and then the setting is completed.
Note
The sleep timer can be set by pressing SLEEP while the
remaining time is displayed.
Using Headphones
Connect to the jack plug of the headphones.
When the headphones are connected, there is no sound
output from the speakers.
Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Before plugging in or unplugging the headphone,
reduce the volume.
Be sure your headphone has a 3.5 mm diameter plug
and impedance between 16
: and 50 :. The
recommended impedance is 32
:.
TIMER VOLUME
PHONES AUDIO IN
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
iPod/iPhone/iPad playback05
16
En
Chapter 5:
iPod/iPhone/iPad playback
Merely by connecting your iPod/iPhone/iPad to this unit, you
can enjoy high-quality sound from your iPod/iPhone/iPad.
Confirming what iPod/iPhone/iPad
models are supported
The iPod/iPhone/iPad playable on this unit are shown below.
Note
Pioneer does not guarantee that this unit plays iPod/
iPhone/iPad models other than the ones specified.
Some functions may be restricted depending on the
model or software version.
iPod/iPhone/iPad is licensed for reproduction of non-
copyrighted materials or materials the user is legally
permitted to reproduce.
Features such as the equalizer cannot be controlled
using this system, and we recommend switching the
equalizer off before connecting.
Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising from
any inconvenience or loss of recorded material resulting
from iPod/iPhone/iPad failure.
For detailed instructions on using the iPod/iPhone/iPad,
please refer to the manual supplied with the iPod/
iPhone/iPad.
This system has been developed and tested for the
software version of iPod/iPhone/iPad indicated on the
website of Pioneer (http://pioneer.jp/homeav/support/
ios/eu/).
Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone/iPad may result
in incompatibility with this system.
This unit cannot be used to record CD, tuner or other
content on an iPod/iPhone/iPad.
Connecting your iPod/iPhone/iPad
CAUTION
When connecting iPod/iPhone/iPad devices, use the
iPod/iPhone/iPad cable provided with iPod/iPhone/iPad
devices, or a commercially available iPod/iPhone/iPad
cable designed to support iPod/iPhone/iPad.
An iPod/iPhone/iPad cable is not supplied with this unit.
Important
If you are mounting the protective cover of a
commercially available iPod/iPhone/iPad, you may not
be able to connect iPod/iPhone/iPad to this unit.
iPod/iPhone/iPad
Lightning
connector
(X-CM42BT only)
USB Terminal
iPod nano 3G/4G/5G/6G
iPod nano 7G 
iPod touch 1G/2G/3G/4G
iPod touch 5G 
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
iPhone 4s
iPhone 5 
iPhone 5c 
iPhone 5s 
iPad mini
iPad mini with Retina
display
iPad
iPad 2
iPad (3rd generation)
iPad (4th generation)
iPad Air
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
iPod/iPhone/iPad playback 05
17
En
English
Français Español
Connecting iPod/iPhone to the top
panel (X-CM42BT only)
1 Press the PUSH OPEN.
2 Open the iPod/iPhone connector port.
3 Connect your iPod/iPhone.
Close the iPod/iPhone connector port
(X-CM42BT only)
While pull the PULL CLOSE knob (1), close the iPod/
iPhone/iPad connector port firmly (2).
When iPod/iPhone is not connected to the unit, close
the iPod/iPhone connector port firmly.
Connecting iPod/iPhone/iPad using
supplied stand
1 Connect the unit to an iPod/iPhone/iPad
with the iPod/iPhone/iPad cable.
1
2
iPod/iPhone/iPad
cable
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
iPod/iPhone/iPad playback05
18
En
2 Set up to stand the iPod/iPhone/iPad.
When using an iPod/iPhone
Make sure the iPod/iPhone cable is aligned along the groove
for it on the back of the stand that comes with the unit.
When using iPad
Make sure to place the iPad in a horizontal direction on the
stand.
Playing iPod/iPhone
1 Connect your iPod/iPhone.
If an iPod/iPhone is connected when this unit is on, playback
of the iPod/iPhone will not begin.
2 Press
iPod
or
USB
as the input source.
“IPOD” or “USB/IPOD” is shown on the main display.
3 When the recognition is completed, will
begin playing automatically.
Playing iPad
1 Connect your iPad.
If an iPad is connected when this unit is on, playback of the
iPad will not begin.
2Press
USB
as the input source.
“USB/IPOD” is shown on the main display.
3 When the recognition is completed, will
begin playing automatically.
CAUTION
When your iPod/iPhone/iPad is connected to this unit
and you wish to operate the iPod/iPhone/iPad directly,
be sure to steady the iPod/iPhone/iPad with the other
hand to prevent malfunctions due to faulty contacts.
Note
For detailed instructions on using the iPod/iPhone/iPad,
please refer to the manual supplied with the iPod/
iPhone/iPad.
iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this unit. (This function is
supported in standby mode as well.)
When input is switched from iPod to another function,
iPod/iPhone/iPad playback is temporarily stopped.
When iPod/iPhone/iPad is not playing and no operations
have been performed for more than 20 minutes, the unit
will automatically power off. In this case it is required
that the Auto power off is switched to ON.
Auto power off can be switched to ON/OFF (page 36).
Important
If this unit cannot play your iPod/iPhone/iPad, perform
the following troubleshooting checks:
- Check whether the iPod/iPhone/iPad is supported by
this unit.
- Reconnect the iPod/iPhone/iPad to the unit. If this
doesn’t seem to work, try resetting your iPod/iPhone/
iPad.
- Check the iPod/iPhone/iPad software is supported by
this unit.
If the iPod/iPhone/iPad cannot be operated, check the
following items:
- Is the iPod/iPhone/iPad connected correctly?
Reconnect the iPod/iPhone/iPad to the unit.
- Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to the
unit.
Back of stand
iPod/iPhone
cable
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
Disc playback 06
19
En
English
Français Español
Chapter 6:
Disc playback
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot
record on them. Some audio CD-R and CD-RW discs may not
be playable due to the state of the disc or the device that was
used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which is
processed by significant compression from the original audio
source with very little loss in sound quality.
This system supports MPEG-1/2 Audio Layer 3 (Sampling
rates: 8 kHz to 48 kHz; Bit rates: 32 kbps to 320 kbps).
During VBR file playback, time counter in the display
may differ from its actual playback time.
WMA:
WMA (Windows Media Audio) files are Advanced System
Format files that include audio files which are compressed
with Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media Player.
This system supports WMA (Sampling rates: 32 kHz/44.1
kHz/48 kHz; Bit rates: 64 kbps to 320 kbps).
During VBR file playback, time counter in the display
may differ from its actual playback time.
Playing discs or files
1 Press
1 STANDBY/ON
to turn the power on.
2 Press
CD
on the remote control or
INPUT
repeatedly on the main unit to select CD input.
3 Press
$ OPEN/CLOSE
to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press
$ OPEN/CLOSE
to close the disc tray.
6 Press
!
to start playback.
After the last track is played, the unit will stop automatically.
CAUTION
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray whilst it is moving.
If the power fails whilst the tray is open, wait until the
power is restored.
Be sure to place 8 cm disc in the middle of the disc tray.
Note
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode (only
for CD).
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Tip
When no operation has done in CD mode and the audio
file is not played for more than 20 minutes, the power will
automatically turn off. In this case it is required that the
Auto power off is switched to ON.
Auto power off can be switched to ON/OFF (page 36).
Various disc functions
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback mode.
Pause
Press in the playback mode.
Press
!
to resume
playback from the paused
point.
Track up/
down
Press in the playback or stop
mode.
If you press the button in the
stop mode, press
!
to
start the desired track.
Fast
forward/
reverse
Press and hold down in the
playback mode.
Release the button to
resume playback.




 
 
B'LVF3OD\EDFNB;&0IP࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸲᭶㸰㸶᪥ࠉ᭶᭙᪥ࠉ༗ᚋ㸰᫬㸷ศ
Disc playback06
20
En
Advanced CD or MP3/WMA disc
playback
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to
select the desired track whilst playing the selected
disc.
Note
A track number higher than the number of tracks on the
disc cannot be selected.
To stop playback:
Press #.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press REPEAT repeatedly until “RPT ONE” appears. Press
ENTER.
To repeat all tracks:
Press REPEAT repeatedly until “RPT ALL” appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on next
page and then press REPEAT repeatedly until “RPT ALL”
appears. Press ENTER.
To cancel repeat play:
Press REPEAT repeatedly until “RPT OFF” appears. Press
ENTER.
Note
After performing repeat play, be sure to press #.
Otherwise, the disc will play continuously.
During repeat play, random play is not possible.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until “RDM ON” appears. Press
ENTER.
To cancel random play:
Press RANDOM repeatedly until “RDM OFF” appears. Press
ENTER.
Note
If you press the , during random play, you can move
to the track selected next by the random operation.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
During random play, repeat play is not possible.
STANDBY/ON
CD USB TUNER
AUDIO IN
iPod
123
456
789
0
BT AUDIO
CLOCK/TIMER
SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER

+
MEMORY
/PROGRAM
RDS
ENTER
;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸰᭶㸴᪥ࠉᮌ᭙᪥ࠉ༗๓㸯㸮᫬㸲㸰ศ
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260

Pioneer X-CM32BT-W Manuale utente

Categoria
Ricevitori multimediali per auto
Tipo
Manuale utente