AEG HG654421UM Manuale utente

HG654421 EN User manual 2

FR Notice d'utilisation 16

DE Benutzerinformation 31

IT Istruzioni per l’uso 46

ES Manual de instrucciones 61

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

2

www.aeg.com

1. SAFETY INFORMATION

Before the installation and use of the appliance, careful-

ly read the supplied instructions. The manufacturer is

not responsible if an incorrect installation and use cau-

ses injuries and damages. Always keep the instructions

with the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they are supervised by an adult or a

person who is responsible for their safety.

• Do not let children play with the appliance. Children

under 3 years must not be left unsupervised in the vi-

cinity of the appliance.

• Keep all packaging away from children.

• Keep children and pets away from the appliance

when it operates or when it cools down. Accessible

parts are hot.

• If the appliance has a child safety device, we recom-

mend that you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

• The appliance and its accessible parts become hot

during use. Do not touch the heating elements.

• Do not operate the appliance by means of an exter-

nal timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

ENGLISH 3

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a

fire blanket.

• Do not store items on the cooking surfaces.

• Do not use a steam cleaner to clean the appliance.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• Where the appliance is directly connected to the

power supply, an all-pole isolating switch with a con-

tact gap is required. Complete disconnection in com-

pliance with the conditions specified in overvoltage

category III must be guaranteed. The earth cable is

excluded from this.

• When you route the mains cable, make sure that the

cable doesn't come into direct contact (for example

using insulating sleeving) with parts that can reach

temperatures of more than 50°C above room temper-

ature.

2.

SAFETY INSTRUCTIONS

This appliance is suitable for the

following markets: FR

IT

2.1 Installation

WARNING!

Only a qualified person must in-

stall this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This pre-

vents hot cookware to fall from the ap-

pliance when the door or the window

is opened.

4

www.aeg.com

• If the appliance is installed above

drawers make sure that the space, be-

tween the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. We recommend to install a non-

combustile separation panel under the

appliance to prevent access to the

bottom.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections must be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is dis-

connected from the power supply.

• Use the correct electricity mains cable.

• Do not let the electricity mains cable

tangle.

• Make sure the mains cable or plug (if

applicable) does not touch the hot ap-

pliance or hot cookware, when you

connect the appliance to the near

sockets

• Make sure the appliance is installed

correctly. Loose and incorrect electrici-

ty mains cable or plug (if applicable)

can make the terminal become too

hot.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on cable.

• Make sure not to cause damage to the

mains plug (if applicable) or to the

mains cable. Contact the Service or an

electrician to change a damaged

mains cable.

• The electrical installation must have an

isolation device which lets you discon-

nect the appliance from the mains at

all poles. The isolation device must

have a contact opening width of mini-

mum 3 mm.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the ad-

justment of the appliance are compat-

ible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

• This appliance is not connected to a

device, which evacuates the products

of combustion. Make sure to connect

the appliance according to current in-

stallation regulations. Pay attention to

requirements regarding adequate

ventilation.

2.2 Use

WARNING!

Risk of injury, burns or electric

shock.

• Remove all the packaging, labelling

and protective film (if applicable) be-

fore first use.

• Use this appliance in a household en-

vironment

• Do not change the specification of this

appliance.

• Do not let the appliance stay unatten-

ded during operation.

• Do not operate the appliance with wet

hands or when it has contact with wa-

ter.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Set the cooking zone to “off” after

use.

• Do not use the appliance as a work or

as a storage surface.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire or explosion.

• Fats and oil when heated can release

flammable vapours. Keep flames or

ENGLISH 5

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food rem-

nants, can cause fire at a lower tem-

perature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the appliance.

• Do not keep hot cookware on the con-

trol panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cook-

ware fall on the appliance. The surface

can be damaged.

• Do not activate the cooking zones

with empty cookware or without cook-

ware.

• Do not put aluminium foil on the ap-

pliance.

• Do not let acid liquids, for example

vinegar, lemon juice or limescale re-

mover, touch the hob. This can cause

matt patches.

• This appliance is for cooking purposes

only. Do not use the appliance for oth-

er purposes, as for example room

heating.

• The use of a gas cooking appliance re-

sults in the production of heat and

moisture. Provide good ventilation in

the room where the appliance is instal-

led.

• Make sure that the ventilation open-

ings are not blocked.

• Prolonged intensive use of the appli-

ance may call for additional ventila-

tion, for example opening of a win-

dow, or more effective ventilation, for

example increasing the level of me-

chanical ventilation where present.

• Use only stable cookware with the cor-

rect shape and diameter larger than

the dimensions of the burners. There

is a risk of overheating and rupture of

the glass plate (if applicable).

• Make sure the flame does not go out

when you quickly turn the knob from

the maximum to the minimum posi-

tion.

• Make sure pots are centrally posi-

tioned on the rings and do not stick

out over edges of the cooking surface.

• Use only the accessories supplied with

the appliance.

• Do not install a flame diffuser on the

burner.

2.3 Care and Cleaning

WARNING!

Risk of damage to the appliance.

• Clean regularly the appliance to pre-

vent the deterioration of the surface

material.

• Do not use water spray and steam to

clean the appliance.

• Do not clean the burners in the dish-

washer.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal ob-

jects.

2.4 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the ap-

pliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Flat the external gas pipes.

6

www.aeg.com

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

3

4

2

1

Semi-rapid burner

2

Triple Crown burner

3

Auxiliary burner

4

Control knobs

3.2 Control knobs

Symbol Description

no gas supply /

off position

ignition posi-

tion / maximum

gas supply

Symbol Description

minimum gas

supply

4. DAILY USE

WARNING!

Refer to the Safety chapters.

4.1 Ignition of the burner

WARNING!

Be very careful when you use

open fire in kitchen environment.

Manufacturer decline any re-

sponsibility in case of misuse of

the flame

Always light the burner before

you put cookware.

Lightning the burner:

1.

Push the control knob down and

turn it counterclockwise to the maxi-

mum position (

).

2.

Keep the control knob pushed for

equal or less than 10 seconds to let

the thermocouple warm up. If not,

the gas supply will be interrupted.

3.

Adjust the flame after it is regular.

If the burner does not light after

some tries, check if the crown

and its cap are in correct posi-

tions.

A

B

C

A)

Burner cap and crown

B)

Thermocouple

C)

Ignition candle

ENGLISH 7

C

D

B

A

A)

Burner cap

B)

Burner crown

C)

Ignition candle

D)

Thermocouple

WARNING!

Do not keep the control knob

pushed for more than 15 sec-

onds.

If the burner does not light after

15 seconds, release the control

knob, turn it into off position and

try to light the burner again after

minimum 1 minute.

In the absence of electricity you

can ignite the burner without

electrical device; in this case ap-

proach the burner with a flame,

push the relevant knob down

and turn it counter-clockwise to

maximum gas release position.

If the burner accidentally goes

out, turn the control knob to the

off position and try to light the

burner again after minimum 1 mi-

nute.

The spark generator can start au-

tomatically when you switch on

the mains, after installation or a

power cut. It is normal.

4.2 Turning the burner off

To put the flame out, turn the knob to

the symbol

.

WARNING!

Always turn the flame down or

switch it off before you remove

the pans from the burner.

5. HELPFUL HINTS AND TIPS

WARNING!

Refer to the Safety chapters.

5.1 Energy savings

• If possible, always put the lids on the

pans.

• When the liquid starts to boil, turn

down the flame to barely simmer the

liquid.

WARNING!

Use cookware with diameters ap-

plicable to the size of burners.

Burner Diameters of cook-

ware

Triple

Crown

180 - 260 mm

Burner Diameters of cook-

ware

Semi-rapid 120 - 220 mm

Auxiliary 80 - 180 mm

WARNING!

Make sure that the bottoms of

pots do not stand above the con-

trol knobs. If the control knobs

are under the bottoms of pots,

the flame heats them up.

Do not put the same pan on two

burners.

8

www.aeg.com

WARNING!

Make sure that pot handles is not

above the front edge of the

cooktop. Make sure that pots are

centrally put on the rings in order

to get maximum stability and to

get lower gas consumption.

Do not put unstable or damaged pots

on the rings to prevent from spill and in-

jury.

WARNING!

Do not use a flame diffuser.

6. CARE AND CLEANING

WARNING!

Refer to the Safety chapters.

WARNING!

Deactivate the appliance and let

it cool down before you clean it.

Disconnect the appliance from

the electrical supply before you

do cleaning or maintenance

work.

Scratches or dark stains on the

surface have no effect on how

the appliance operates.

• You can remove the pan supports to

easily clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before

you put them back.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

•The pan supports are not dishwasher

proof. They must be washed by hand.

• The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

• Make sure you position the pan sup-

ports correctly after cleaning.

• To make the burners work correctly,

make sure that the arms of the pan

supports are in the centre of the burn-

er.

• Be very careful when you replace

the pan supports to prevent the hob

top from damage.

After cleaning, dry the appliance with a

soft cloth.

Removing the dirt:

1.

– Remove immediately: melting

plastic, plastic foil, and food con-

taining sugar.

– Stop the appliance and let it

cool down before you clean: lime-

scale rings, water rings, fat stains,

shiny metallic discolorations. Use a

special cleaner applicable for sur-

face of hob.

2.

Clean the appliance with a damp

cloth and some detergent.

3.

At the end rub the appliance dry

with a clean cloth.

The stainless steel can become tarnished

if it is too much heated. Refer to this you

must not cook with potstones, earthen-

ware pans or cast iron plates.

6.1 Cleaning of the spark plug

This feature is obtained through a ce-

ramic ignition candle with a metal elec-

trode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

ENGLISH 9

6.2 Periodic maintenance

Periodically speak your local Service

Force Centre to check the conditions of

the gas supply pipe and the pressure ad-

juster, if fitted.

7. TROUBLESHOOTING

Problem Possible cause Remedy

There is no spark when

lighting the gas

• There is no electrical

supply

• Make sure that the

unit is connected and

the electrical supply is

switched on.

• Control the fuse. If the

fuse is released more

than one time, refer to

a qualified electrician.

•Burner cap and crown

are placed uneven

• Make sure that the

burner cap and crown

are in correct posi-

tions.

The flame is blow out im-

mediately after ignition

• Thermocouple is not

heated sufficient

• After lightning the

flame, keep the knob

pushed for equal or

less than 10 seconds.

The gas ring burns un-

evenly

• Burner crown is

blocked with food resi-

dues

• Make sure that the in-

jector is not blocked

and the burner crown

is clear of food parti-

cles.

If there is a fault, first try to find a solu-

tion to the problem yourself. If you can-

not find a solution to the problem your-

self, speak your dealer or the local Serv-

ice Force Centre.

If you operated the appliance in-

correctly, or the installation was

not carried out by a registered

engineer, the visit from the cus-

tomer service technician or deal-

er may not take place free of

charge, even during the warranty

period.

These data are necessary to help you

quickly and correctly. These data are

available on the supplied rating plate.

• Model description .................

• Product number (PNC) .................

• Serial Number (S.N.) .................

Use the original spare parts only. They

are available at Service Force Centre and

approved spare parts shops.

7.1 Labels supplied with the

accessories bag

Stick the adhesive labels as indicated

below:

10

www.aeg.com

MOD.

PROD.NO.

SER.NO

DATA

MOD.

PROD.NO.

SER.NO

DATA

MODELMODEL

MOD.

PROD.NO.

SER.NO.

03 IT

MADE IN ITALY

TYPE

230V-50Hz

IP20

0049

A B C

A)

Stick it on Guarantee Card and send

this part (if applicable)

B)

Stick it on Guarantee Card and keep

this part (if applicable)

C)

Stick it on instruction booklet

8. INSTALLATION

WARNING!

Refer to the Safety chapters.

WARNING!

The following instructions about

installation, maintenance and

ventilation must be carried out

by qualified personnel in compli-

ance with the regulation in force

(UNI-CIG 7129 - 7131). Make sure

that the kitchen is well ventilated:

keep natural ventilation holes

open (at least 100 cm²) or install a

mechanical extractor hood.

8.1 Gas Connection

Choose fixed connections or use a flexi-

ble pipe in stainless steel in compliance

with the regulation in force. If you use

flexible metallic pipes, be careful they

do not come in touch with mobile parts

or they are not squeezed. Also be care-

ful when the hob is put together with an

oven.

Make sure that the gas supply

pressure of the appliance obeys

the recommended values.

If the supplied pressure has not the

specified value, it is necessary to assem-

ble a proper pressure regulator in com-

pliance with the standard UNI EN 88. For

Liquid Gas (LPG) the use of pressure

regulator is allowed only if they are in

compliance with UNI EN 12864. The ad-

justable connection is fixed to the com-

prehensive ramp by means of a threa-

ded nut G 1/2". Screw the parts without

force, adjust the connection in the nec-

essary direction and tighten everything.

ABC

A)

End of shaft with nut

B)

Washer

C)

Elbow (if needed)

ENGLISH 11

Rigid connection:

Carry out connection by using metal rig-

id pipes (copper with mechanical end)

(UNI-CIG 7129).

Flexible connection:

Use a flexible pipe in stainless steel

(UNI-CIG 9891) with a maximum length 2

m.

When installation is complete,

make sure that the seal of each

pipe fitting is correct. Use a

soapy solution, not a flame!

8.2 Injectors replacement

1.

Remove the pan supports.

2.

Remove the caps and crowns of the

burner.

3.

With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the

type of gas you use (see table in

"Technical Information" chapter).

4.

Assemble the parts, follow the same

procedure backwards.

5.

Replace the rating plate (it is near

the gas supply pipe) with the one for

the new type of gas supply. You can

find this plate in the package sup-

plied with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure ad-

juster on the gas supply pipe.

8.3 Adjustment of minimum

level

To adjust the minimum level of the burn-

ers:

1.

Light the burner.

2.

Turn the knob on the minimum posi-

tion.

3.

Remove the knob.

4.

With a thin screwdriver, adjust the

by-pass screw position.

A

A)

The by-pass screw

• If you change from natural gas G20 20

mbar to liquid gas, fully tighten the

by-pass screw in.

• If you change from liquid gas to natu-

ral gas G20 20 mbar, undo the by-pass

screw approximately 1/4 of a turn (1/2

of a turn for Triple Crown burner).

WARNING!

Make sure the flame does not go

out when you quickly turn the

knob from the maximum position

to the minimum position.

8.4 Electrical connection

• Make sure that the rated voltage and

type of power on the rating plate

agree with the voltage and the power

of the local power supply.

• This appliance is supplied with a mains

cable. It has to be supplied with a cor-

rect plug which can hold the load that

the rating plate rates. Make sure that

you install the plug in a correct socket.

• Always use a correctly installed shock-

proof socket.

• Make sure that there is an access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• There is a risk of fire when the appli-

ance is in connection with an exten-

sion cable, an adapter or a multiple

connection. Make sure that the

ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up

to a temperature higher than 90° C.

To prevent contact between the cable

and the appliance below the hob use

the clamps which are on the side of the

cabinet.

12

www.aeg.com

A

A)

Rigid copper pipe or flexible pipe of

stainless steel

8.5 Replacement of the

connection cable

To replace the connection cable use on-

ly H05V2V2-F T90 or equivalent type.

Make sure that the cable section is appli-

cable to the voltage and the working

temperature. The yellow/green earth

wire must be approximately 2 cm longer

than the brown (or black) phase wire.

8.6 Building In

min.

55 mm

min.

650 mm

560 mm

480 mm

min.

200 mm

30 mm

B

A

A)

supplied seal

B)

supplied brackets

CAUTION!

Install the appliance only on a

worktop with flat surface.

If you install the hob under a

hood, please see the installation

instructions of the hood for the

minimum distance between the

appliances.

8.7 Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must

be easy to remove and let an easy ac-

cess in case a technical assistance inter-

vention is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

B

A

A)

Removable panel

B)

Space for connections

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

ENGLISH 13

9. TECHNICAL INFORMATION

Hob dimensions

Width: 595 mm

Length: 525 mm

Hob recess dimensions

Width: 560 mm

Length: 480 mm

Heat input

Triple Crown burner: 4.0 kW

Semi-Rapid burner: 2.0 kW

Auxiliary burner: 1.0 kW

TOTAL POWER: G20 (2H) 20 mbar = 9 kW

G30 (3+) 28–30 mbar = 654 g/h

G31 (3+) 37 mbar = 643 g/h

Electric supply: 230 V ~ 50 Hz

Category: II2H3+

Gas connection: G 1/2

Gas supply: G20 (2H) 20 mbar

Appliance class: 3

By-pass diameters

Burner Ø By-pass in

1/100 mm

Burner Ø By-pass in

1/100 mm

Auxiliary 28 Triple Crown 56

Semi-rapid 32

Gas burners for NATURAL GAS G20 20 mbar

BURNER NORMAL POWER kW inj. 1/100 mm

Auxiliary 1.0 70

Semi-rapid 2.0 96

Triple Crown 4.0 146

Gas burners for LPG G30/G31 28-30/37 mbar

BURNER

NORMAL

POWER

kW

inj.

1/100 mm

G30

28-30 mbar

G31

37 mbar

g/h g/h

Auxiliary 1.0 50 73 71

Semi-rapid 2.0 71 145 143

14

www.aeg.com

BURNER

NORMAL

POWER

kW

inj.

1/100 mm

G30

28-30 mbar

G31

37 mbar

g/h g/h

Triple Crown 4.0 98 291 286

10. ENVIRONMENT CONCERNS

Recycle the materials with the

symbol

. Put the packaging in

applicable containers to recycle it.

Help protect the environment and

human health and to recycle waste

of electrical and electronic

appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling

facility or contact your municipal

office.

ENGLISH 15

SOMMAIRE

1. CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3. DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4. UTILISATION QUOTIDIENNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5. CONSEILS UTILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6. ENTRETIEN ET NETTOYAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7. EN CAS D'ANOMALIE DE FONCTIONNEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

9. CARACTERISTIQUES TECHNIQUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies innovantes qui

vous simplifient la vie grâce à des caractéristiques que vous ne trouverez pas forcément sur

des appareils ordinaires. Veuillez prendre quelques instants pour lire cette notice afin d'utiliser

au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com

Enregistrer votre produit pour obtenir un meilleur service :

www.aeg.com/productregistration

Acheter des accessoires, consommables et pièces de rechange d'origine pour votre

appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

N'utilisez que des pièces de rechange d'origine.

Avant de contacter le service, assurez-vous de disposer des informations suivantes :

Vous trouverez ces informations sur la plaque signalétique. Modèle, PNC, numéro de série.

Avertissement/Attention : consignes de sécurité.

Informations générales et conseils

Informations écologiques

Sous réserve de modifications.

16

www.aeg.com

1. CONSIGNES DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez soigneu-

sement les instructions fournies. Le fabricant ne peut

être tenu pour responsable des dommages et blessures

liés à une mauvaise installation ou utilisation. Conservez

toujours cette notice avec votre appareil pour vous y ré-

férer ultérieurement.

1.1 Sécurité des enfants et des personnes

vulnérables

AVERTISSEMENT

Risque d'asphyxie, de blessure ou d'invalidité per-

manente.

• Cet appareil peut être utilisé par des enfants de plus

de 8 ans, ainsi que des personnes dont les capacités

physiques, sensorielles et mentales sont réduites ou

dont les connaissances et l'expérience sont insuffi-

santes, à condition d'être surveillés par une personne

responsable de leur sécurité.

• Ne laissez pas les enfants jouer avec l'appareil. Les

enfants de moins de 3 ans ne doivent pas être laissés

sans surveillance à proximité de l'appareil.

• Ne laissez pas les emballages à la portée des enfants.

• Tenez les enfants et les animaux éloignés de l'appa-

reil lorsqu'il est en cours de fonctionnement ou lors-

qu'il refroidit. Les parties accessibles sont chaudes.

• Si l'appareil est équipé d'un dispositif de sécurité en-

fants, nous vous recommandons de l'activer.

• Les enfants ne doivent pas nettoyer ni entreprendre

une opération de maintenance sur l'appareil sans sur-

veillance.

FRANÇAIS 17

1.2 Sécurité générale

• L'appareil et ses parties accessibles deviennent

chauds pendant son fonctionnement. Ne touchez pas

les éléments chauffants.

• Ne faites pas fonctionner l'appareil avec un minuteur

externe ou un système de commande à distance.

• Il peut être dangereux de laisser chauffer de la grais-

se ou de l'huile sans surveillance sur une table de

cuisson car cela pourrait provoquer un incendie.

• N'essayez jamais d'éteindre un feu avec de l'eau.

Mettez à l'arrêt l'appareil puis couvrez les flammes,

par exemple avec un couvercle ou une couverture

ignifuge.

• N'entreposez rien sur les surfaces de cuisson.

• N’utilisez pas de nettoyeur vapeur pour nettoyer l'ap-

pareil.

• Ne posez pas d'objets métalliques tels que couteaux,

fourchettes, cuillères ou couvercles sur la table de

cuisson car ils pourraient chauffer.

• Si le câble d'alimentation est endommagé, il ne doit

être remplacé que par un professionnel qualifié afin

d'éviter tout danger.

• Si l'appareil est relié directement à l'alimentation

électrique, installez un sectionneur avec une ouvertu-

re de contact. Il est indispensable de garantir une dé-

connexion complète conformément aux conditions

de surtension de catégorie III. Le fil de terre n'est pas

concerné.

• Lorsque vous acheminez le câble d'alimentation, as-

surez-vous qu'il n'entre pas en contact direct (par

exemple, à l'aide d'un manchon isolant) avec des par-

ties pouvant atteindre des températures supérieures

de 50 °C à la température ambiante.

18

www.aeg.com

2.

INSTRUCTIONS DE SÉCURITÉ

Cet appareil est adapté aux marchés

suivants : FR

IT

2.1 Installation

AVERTISSEMENT

L'appareil doit être installé uni-

quement par un professionnel

qualifié.

• Retirez l'intégralité de l'emballage.

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les instruc-

tions d'installation fournies avec l'ap-

pareil.

• Respectez la distance minimale requi-

se avec les autres appareils et élé-

ments.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd.

Portez toujours des gants de sécurité.

• Isolez les surfaces découpées à l'aide

d'un matériau d'étanchéité pour éviter

que la moisissure ne provoque de

gonflements.

• Protégez la partie inférieure de l'appa-

reil de la vapeur et de l'humidité.

• N'installez pas l'appareil près d'une

porte ou sous une fenêtre. Les réci-

pients chauds risqueraient de tomber

de l'appareil lors de l'ouverture de cel-

les-ci.

• Si l'appareil est installé au-dessus de

tiroirs, assurez-vous qu'il y a suffisam-

ment d'espace entre le fond de l'ap-

pareil et le tiroir supérieur pour que

l'air puisse circuler.

• Le dessous de l'appareil peut devenir

très chaud. Nous vous recommandons

d'installer un panneau de séparation

ignifuge sous l'appareil pour en blo-

quer l'accès.

Branchement électrique

AVERTISSEMENT

Risque d'incendie ou d'électro-

cution.

• L'ensemble des branchements électri-

ques doit être effectué par un techni-

cien qualifié.

• L'appareil doit être relié à la terre.

• Avant toute intervention, assurez-vous

que l'appareil est débranché.

• Utilisez le câble d'alimentation électri-

que approprié.

• Ne laissez pas le câble d'alimentation

s'emmêler.

• Assurez-vous que le câble d'alimenta-

tion ou la fiche (si présente) n'entrent

pas en contact avec les surfaces brû-

lantes de l'appareil ou les récipients

brûlants lorsque vous branchez l'appa-

reil à des prises électriques situées à

proximité.

• Assurez-vous que l'appareil est bien

installé. Un câble d'alimentation lâche

et inapproprié ou une fiche (si présen-

te) non serrée peuvent être à l'origine

d'une surchauffe des bornes.

• Assurez-vous qu'une protection anti-

électrocution est installée.

• Utilisez un collier anti-traction sur le

câble.

• Veillez à ne pas endommager la fiche

secteur (si présente) ni le câble d'ali-

mentation. Contactez le service après-

vente ou un électricien pour remplacer

le câble d'alimentation s'il est endom-

magé.

• L'installation électrique doit être équi-

pée d'un dispositif d'isolement à cou-

pure omnipolaire. Le dispositif d'isole-

ment doit présenter une distance

d'ouverture des contacts d'au moins

3 mm.

• N'utilisez que des systèmes d'isolation

appropriés : des coupe-circuits, des

fusibles (les fusibles à visser doivent

être retirés du support), un disjoncteur

différentiel et des contacteurs.

Raccordement au gaz

• Tout raccordement au gaz doit être

effectué par une personne qualifiée.

• Avant l'installation, vérifiez que les

conditions de distribution locales (na-

ture et pression du gaz) sont compati-

bles avec le réglage de l'appareil.

FRANÇAIS 19

• Assurez-vous que l'air circule autour

de l'appareil.

• Les informations relatives à l'alimenta-

tion en gaz se trouvent sur la plaque

signalétique.

• Cet appareil n'est pas raccordé à un

dispositif d'évacuation des produits

de combustion. Veillez à brancher

l'appareil en conformité avec les ré-

glementations d'installation en vi-

gueur. Veillez à respecter les exigen-

ces en matière d'aération.

2.2 Utilisation

AVERTISSEMENT

Risque de blessures, de brûlures

ou d'électrocution.

• Avant la première utilisation, retirez

les emballages, les étiquettes et les

films de protection (si présents).

• Utilisez cet appareil dans un environ-

nement domestique.

• Ne modifiez pas les caractéristiques

de cet appareil.

• Ne laissez jamais l'appareil sans sur-

veillance pendant son fonctionne-

ment.

• N'utilisez jamais cet appareil avec les

mains mouillées ou lorsqu'il est en

contact avec de l'eau.

• Ne posez pas de couverts ou de cou-

vercles sur les zones de cuisson. Elles

sont chaudes.

• Éteignez les zones de cuisson après

chaque utilisation.

• N'utilisez jamais l'appareil comme

plan de travail ni comme plan de stoc-

kage.

• Lorsque vous versez un aliment dans

de l'huile chaude, elle peut éclabous-

ser.

AVERTISSEMENT

Risque d'explosion ou d'incen-

die.

• Les graisses et l'huile chaudes peu-

vent dégager des vapeurs inflamma-

bles. Tenez les flammes ou les objets

chauds éloignés des graisses et de

l'huile lorsque vous vous en servez

pour cuisiner.

• Les vapeurs dégagées par l'huile très

chaude peuvent provoquer une com-

bustion spontanée.

• L'huile qui a servi contient des restes

d'aliments pouvant provoquer un in-

cendie à température plus faible que

l'huile n'ayant jamais servi.

• Ne placez pas de produits inflamma-

bles ou d'éléments imbibés de pro-

duits inflammables à l'intérieur ou à

proximité de l'appareil, ni sur celui-ci.

AVERTISSEMENT

Risque d'endommagement de

l'appareil.

• Ne laissez pas de récipients chauds

sur le bandeau de commande.

• Ne laissez pas le contenu des réci-

pients de cuisson s'évaporer complè-

tement.

• Prenez soin de ne pas laisser tomber

d'objets ou de récipients sur l'appa-

reil. Sa surface risque d'être endom-

magée.

• Ne faites jamais fonctionner les zones

de cuisson avec des récipients de cuis-

son vides ou sans aucun récipient de

cuisson.

• Ne placez jamais de papier aluminium

sur l'appareil.

• Ne laissez pas de liquides acides, tels

que du vinaigre, du jus de citron ou du

produit détartrant, entrer en contact

avec la table de cuisson. Cela peut

provoquer l'apparition de taches ma-

tes.

• Cet appareil est exclusivement destiné

à un usage culinaire. Ne l'utilisez pas

pour des usages autres que celui pour

lequel il a été conçu, à des fins de

chauffage par exemple.

• L'utilisation d'un appareil de cuisson

au gaz génère de la chaleur et de l'hu-

midité. Veillez à ce que la pièce où est

installé l'appareil soit bien aérée.

• Assurez-vous que les orifices de venti-

lation ne sont pas bouchés.

• L'utilisation intensive et prolongée de

l'appareil peut nécessiter une ventila-

tion supplémentaire comme l'ouvertu-

re d'une fenêtre, ou une aération plus

efficace en augmentant par exemple

la puissance de la ventilation mécani-

que si la pièce en est dotée.

20

www.aeg.com

La pagina sta caricando ...

AEG HG654421UM Manuale utente

AEG HG654421UM Manuale utente

in altre lingue

Documenti correlati