Motorola 2700 - Car Cell Phone Manuale utente

Powerline MU User Guide

Powerline MU

User Guide

PowerlineMU-UG-en

Issue 4.0

August, 2007

Trademarks, Product Names, and Service Names

MOTOROLA, the stylized M Logo, Canopy and all other trademarks indicated as such

herein are registered trademarks of Motorola, Inc.

®

Reg. U.S. Pat & Tm. Office. All other

product or service names are the property of their respective owners.

http://www.motorola.com/canopy

Powerline MU

Page 3 of 112

TABLE OF CONTENTS

1 ABOUT THIS USER GUIDE....................................................................................... 8

1.1 Becoming Familiar with This User Guide ........................................................... 8

1.2 Getting Additional Help...................................................................................... 9

1.3 Sending Feedback........................................................................................... 10

2 OVERVIEW OF POWERLINE MU............................................................................ 11

2.1 Powerline MU Features ................................................................................... 12

2.1.1 Security.............................................................................................................. 12

2.1.2 Bandwidth Management.................................................................................... 13

2.1.3 Network Operations........................................................................................... 13

2.2 Powerline MU Products ................................................................................... 14

2.3 Ordering Equipment Plug Types...................................................................... 14

3 Planning the Powerline MU Network ..................................................................... 15

3.1 Canopy Wireless ............................................................................................. 15

3.2 Powerline MU .................................................................................................. 15

3.3 Connecting the Canopy Network to the Gateway............................................. 16

3.3.1 Ethernet from SM to Gateway........................................................................... 16

3.3.2 Ethernet from SM to Powerline MU Hybrid Adapter to Powerline MU Hybrid

Adapter to Gateway ........................................................................................................ 17

3.4 Building Electrical Considerations.................................................................... 17

3.4.1 Main Planning.................................................................................................... 17

3.4.2 Owners of Electrical Equipment ........................................................................ 17

3.4.3 Gateway Location.............................................................................................. 17

4 Installing Powerline MU.......................................................................................... 18

4.1 Two-Phase (Single-Phase) Installation............................................................ 21

4.2 Three-Phase Installation.................................................................................. 22

4.2.1 Mass Metered.................................................................................................... 23

4.2.2 Using a Panel Extender (multiple electrical panels).......................................... 24

4.2.3 Individually Metered .......................................................................................... 25

4.2.4 Multiple Transformer ......................................................................................... 30

5 Hardware Installation.............................................................................................. 33

5.1 Upgrading Firmware ........................................................................................ 33

5.2 Equipment Staging .......................................................................................... 33

Powerline MU

Page 4 of 112

5.3 Installation ....................................................................................................... 34

5.3.1 Mount the Gateway ........................................................................................... 34

5.3.2 Install Modems .................................................................................................. 35

6 CONFIGURING THE POWERLINE MU GATEWAY ................................................ 36

6.1 Connect to the Gateway .................................................................................. 36

6.1.1 User Interface Navigation tips ........................................................................... 37

6.2 Configuration and Maintenance....................................................................... 38

6.2.1 System Information ........................................................................................... 38

6.2.2 Date and Time................................................................................................... 38

6.2.3 System Password Configuration ....................................................................... 39

6.2.4 Logs................................................................................................................... 40

6.2.5 Reboot ............................................................................................................... 41

6.2.6 Backup and Restore Settings............................................................................ 42

6.2.7 Site Info ............................................................................................................. 42

6.3 Advanced ........................................................................................................ 43

6.3.1 BAM Configuration ............................................................................................ 43

6.3.2 SNMP Configuration.......................................................................................... 44

6.3.3 SNMP Access Control....................................................................................... 46

6.3.4 VLAN Configuration........................................................................................... 46

6.4 IP Address....................................................................................................... 51

6.4.1 IP Configuration................................................................................................. 51

6.5 Powerline ........................................................................................................ 52

6.5.1 Modem List ........................................................................................................ 52

6.5.2 NEK Configuration............................................................................................. 53

6.5.3 PSD Setting ....................................................................................................... 54

6.5.4 Remote NEK ..................................................................................................... 56

7 Powerline Modem ................................................................................................... 58

7.1 Connect to the Modem .................................................................................... 58

7.1.1 User Interface Navigation tips ........................................................................... 58

7.2 Powerline Modem Screen Map........................................................................ 59

7.3 Configuring the Powerline Modem................................................................... 59

7.3.1 System Info ....................................................................................................... 60

7.3.2 System Password.............................................................................................. 61

7.3.3 System Logs...................................................................................................... 62

7.3.4 Reset ................................................................................................................. 63

Powerline MU

Page 5 of 112

7.3.5 Backup............................................................................................................... 64

7.3.6 Site Info ............................................................................................................. 65

7.3.7 Advanced Packet Priority .................................................................................. 66

7.3.8 Advanced Bandwidth Control ............................................................................ 67

7.3.9 Advanced SNMP Configuration ........................................................................ 68

7.3.10 Advanced SNMP Access Control...................................................................... 70

7.3.11 Operating Mode (Modem Repeater Function) .................................................. 70

7.3.12 VLAN Configuration........................................................................................... 72

7.4 IP Configuration............................................................................................... 73

7.4.1 IP Configuration with NAT Enabled................................................................... 74

7.4.2 WAN .................................................................................................................. 75

7.4.3 DMZ................................................................................................................... 76

7.4.4 Scan Devices .................................................................................................... 77

7.4.5 Network Encryption Key .................................................................................... 77

7.4.6 PSD Setting ....................................................................................................... 78

8 Legal and Regulatory Notices................................................................................ 79

8.1 Important Note on Modifications ...................................................................... 79

8.2 National and Regional Regulatory Notices....................................................... 79

8.2.1 U.S. Federal Communication Commission (FCC) Notification ......................... 79

8.2.2 Declarations of Conformity ................................................................................ 79

8.3 Legal Notices................................................................................................... 89

8.3.1 Software License Terms and Conditions .......................................................... 89

8.3.2 Hardware Warranty in U.S. ............................................................................... 91

8.3.3 Limit of Liability.................................................................................................. 91

9 Additional Resources ............................................................................................. 92

10 History of Changes in This Document .................................................................. 93

11 Technical Specifications ........................................................................................ 94

Appendix A International Electric Grid Plug Types ................................................. 101

Appendix B Signal Distances..................................................................................... 110

LIST OF FIGURES

Figure 1 Powerline MU Network Overview ...................................................................11

Figure 2 Electrical Symbols...........................................................................................19

Powerline MU

Page 6 of 112

Figure 3 Sample Diagram A...........................................................................................19

Figure 4 Sample Diagram B...........................................................................................20

Figure 5 Two-phase installation....................................................................................22

Figure 6 Three-phase installation .................................................................................22

Figure 7 Mass-metered installation...............................................................................23

Figure 8 Wiring the Panel Extender ..............................................................................24

Figure 9 Mass Metered Building with Panel Extender Capacitive Coupling ..............25

Figure 10 Inductive Coupling Installation Diagram......................................................26

Figure 11 Inductive Coupler Connection, One Transformer .......................................27

Figure 12 Inductive Coupler Connection, Multiple Transformers...............................31

Figure 13 Individually-metered installation (capacitive coupling) ..............................32

Figure 14 Gateway connected to laptop .......................................................................36

Figure 15 System Information Screen ..........................................................................38

Figure 16 Date and Time Screen ...................................................................................38

Figure 17 System Password Configuration Screen.....................................................39

Figure 18 Logs Screen...................................................................................................40

Figure 19 Reboot and Reset to Defaults Screen ..........................................................41

Figure 20 Backup and Restore Settings Screen ..........................................................42

Figure 21 Site Info Screen .............................................................................................42

Figure 22 BAM Configuration........................................................................................43

Figure 23 SNMP Configuration......................................................................................44

Figure 24 SNMP Access Control...................................................................................46

Figure 25 VLAN Configuration ......................................................................................46

Figure 26 An Example Network Configuration for VLAN Implementation..................47

Figure 27 Example of VLAN Configuration Screen in the Gateway. ..........................48

Figure 28. Example Configuration of a Modem in VLAN Pass-Through Mode. .........49

Figure 29. Modem LUID Range Configuration in the Powerline MU Gateway...........50

Figure 30 IP Configuration.............................................................................................51

Figure 31 Modem List ....................................................................................................52

Figure 32 NEK Configuration ........................................................................................53

Figure 33 PSD Setting....................................................................................................54

Figure 34 Modem NEK Screen (Powerline Modem) .....................................................56

Figure 35 Modem NEK Screen (Hybrid Adapter)..........................................................56

Figure 36 Modem Connected to Laptop .......................................................................58

Powerline MU

Page 7 of 112

Figure 37 System Info Screen .......................................................................................60

Figure 38 System Password Screen .............................................................................61

Figure 39 System Logs Screen .....................................................................................62

Figure 40 Reset Screen..................................................................................................63

Figure 41 Backup Screen...............................................................................................64

Figure 42 Site Info Screen .............................................................................................65

Figure 43 Advanced Packet Priority .............................................................................66

Figure 44 Advanced Bandwidth Control.......................................................................67

Figure 45 Advanced SNMP Configuration....................................................................68

Figure 46 SNMP Access Control Screen ......................................................................70

Figure 47 IP Operating Mode (Normal) .........................................................................70

Figure 48 Typical Set Up for the Modem Repeater ......................................................71

Figure 49 Operating Mode (Repeater)...........................................................................71

Figure 50 Operating Mode (Use with Re;eater) ............................................................72

Figure 51 VLAN Configuration (Modem).......................................................................72

Figure 52 IP Address with NAT Enabled Screen..........................................................74

Figure 53 IP Address WAN ............................................................................................75

Figure 54 IP Address DMZ.............................................................................................76

Figure 55 Scan Devices Screen.....................................................................................77

Figure 56 Network Encryption Key Screen...................................................................77

Figure 57 PSD Setting Screen .......................................................................................78

LIST OF TABLES

Table 1 Where to find information in this user guide ....................................................8

Table 2: Examples of where to find information in this user guide ..............................8

Table 3: Admonition types...............................................................................................9

Table 4 Powerline MU Carriers Linked to Carrier Frequency. .....................................55

Powerline MU

Page 8 of 112

1 ABOUT THIS USER GUIDE

In future issues, this section will identify features, descriptions, and revisions that are new

since the last previous issue of this document.

1.1 BECOMING FAMILIAR WITH THIS USER GUIDE

Quick Reference

The Powerline MU User Guide describes the following:

Table 1 Where to find information in this user guide

Planning and installing Powerline MU Chapters 2 through 5

Configuring and maintaining Powerline MU Chapters 6 and 7

Examples

Directions to commonly sought pieces of information are given as examples in Table 2.

Table 2: Examples of where to find information in this user guide

If you want to know… then see…

What Powerline MU devices are included in this

manual

Section 2.2

How to plan your Powerline MU network Chapter 3

How to install Powerline MU devices Chapter 5

This document also employs a set of consistently used admonitions. Each type of

admonition has a general purpose that underlies the specific information in the box.

These purposes are indicated below.

Powerline MU

Page 9 of 112

Table 3: Admonition types

Admonition

Label

General Message

NOTE:

informative content that may

◦ defy common or cursory logic.

◦ describe a peculiarity of the Canopy implementation.

◦ add a conditional caveat.

◦ provide a reference.

◦ explain the reason for a preceding statement or provide background

for what immediately follows.

RECOMMENDATION:

suggestion for an easier, quicker, or safer action or practice.

IMPORTANT:

informative content that may

◦ identify an indication that you should watch for.

◦ advise that your action can disturb something that you may not want

disturbed.

◦ reiterate something that you presumably know but should always

keep in mind.

CAUTION!

a notice that the risk of harm to equipment or service exists.

WARNING!

a notice that the risk of harm to person exists.

1.2 GETTING ADDITIONAL HELP

To get information or assistance as soon as possible for problems that you encounter,

use the following sequence of action:

1. Search this document, the user manuals that support the modules, and the

software release notes of supported releases

a. in the Table of Contents for the topic.

b. in the Adobe Reader

®

search capability for keywords that apply.

1

2. Visit the Canopy systems website at http://www.motorola.com/canopy.

3. Ask your Canopy products supplier to help.

1

Reader is a registered trademark of Adobe Systems, Incorporated.

Powerline MU

Page 10 of 112

4. Gather information such as

◦ the IP addresses and MAC addresses of any affected Powerline devices.

◦ the software releases that operate on these modules.

◦ data from the Event Log page of the modules.

◦ the configuration of software features on these modules.

5. Escalate the problem to Canopy systems Technical Support (or another Tier 3

technical support that has been designated for you) as follows. You may either

◦ send e-mail to technical-support@canopywireless.com.

◦ call 1 888 605 2552 (or +1 217 824 9742).

For warranty assistance, contact your reseller or distributor for the process.

1.3 SENDING FEEDBACK

We welcome your feedback on Canopy system documentation. This includes feedback

on the structure, content, accuracy, or completeness of our documents, and any other

comments you have. Please send your comments to

technical-documentation@canopywireless.com.

Powerline MU

Page 11 of 112

2 OVERVIEW OF POWERLINE MU

Motorola Powerline MU Solution provides a broadband over low-voltage power line

access solution that delivers reliable performance to multiple-dwelling units while

mitigating interference by using low voltage wires. Motorola Powerline MU is designed

for and works with the Canopy™ wireless broadband Internet platform. The standard

Canopy system provides the broadband backbone for the system, creating a wireless

transport system to the hotel, apartment building, or other multiple dwelling unit.

Figure 1 Powerline MU Network Overview

The Canopy Subscriber Module (SM) is the termination unit of the wireless part of the

system and consists of a single transceiver that operates with a 60-degree antenna and

communicates with one or more Access Points (AP). The synchronization and control of

the SM is accomplished via the received AP signal. After the SM is turned on, it scans

the channels and automatically registers with an AP.

The Category 5 Ethernet output cable from the SM plugs directly into the Powerline MU

Gateway unit or via a Powerline MU Hybrid Adapter. Power to the SM is supplied by use

of the SM “pigtail” electric cord. The integrated Subscriber Module (SM)-Powerline

Gateway unit provides signal routing to the Modem devices within the home.

When the Gateway is connected to the low voltage side of the power transformer, digital

data is transmitted over the power line. By using this technique and adding notch filtering

Powerline MU

Page 12 of 112

to Powerline MU carriers, the potential for radio frequency interference is significantly

reduced, especially in the HF radio amateur bands.

Within the home or business, the Powerline Modem fits into any standard AC power

outlet and performs the power line to Ethernet conversion, using the same circuitry as the

Powerline MU Gateway. An Ethernet cable from the Modem to a computer or router

completes the connection.

The Powerline Modem uses the HomePlug® protocol and can coexist without

interference in the same home, but retail HomePlug units cannot take the place of the

Powerline Modem

Careful planning of the Canopy wireless segment of your Powerline MU system is

essential to a successful completion of the network. See “Designing Your Canopy

Network” in the Canopy System User Guide. Follow that guide carefully to achieve a

strong signal at the subscriber modules in the Powerline MU network.

2.1 POWERLINE MU FEATURES

2.1.1 Security

Powerline MU provides the following security solutions:

◦ User ID and Password - The default User ID is admin. The default Password is

Motorola (case sensitive). We recommend these be changed when the system

is deployed to help prevent unauthorized users from accessing the system. This

can be done both locally and via Prizm. A factory reset will change them back to

the defaults.

◦ Authentication (Requires Prizm) - The recommended Authentication method is

via Motorola's Prizm EMS. In addition to monitoring and maintaining

the Powerline equipment, it can also be used for MAC-based authentication for

both the MU and end users. Much like Canopy today, Powerline MU devices can

be managed via Prizm.

◦ Encryption - Data on the Powerline MU network is encrypted using 56-bit Data

Encryption Standard (DES), the HomePlug standard. This prevents any

HomePlug modem from establishing a connection on the network that does not

have the correct Network Encryption Key (NEK). Not only will the modem not be

able to connect to the network, the data packets will not transmit out of the

Ethernet port of the modem to attempt to be decrypted.

◦ Modem isolation - The are two levels of Modem isolation:

A. The first is Virtual Local Area Network (VLAN) tagging. When a Modem is

plugged in, it tries to communicate with a Gateway. If the NEK is correct, the

Gateway and the Modem establish one to one Powerline VLAN communication.

This is internal to the Gateway, so the VLAN ID can be viewed but cannot be

changed without requiring a Gateway reconfiguration. This prevents modems on

the network from having access to data on other modems.

B. The second is in the Modem itself. The modem by default acts as a router.

It requests a DHCP address on the WAN side for management purposes. It also

has a DHCP server for the LAN side so the PC or other device will obtain a

private IP address. In addition, Network Address Translation (NAT) is on, so

each modem (and PC or system under that modem) are on their own private IP

network. The modem addressing can be set to static and NAT turned off if that is

the way the network has been designed.

Powerline MU

Page 13 of 112

These multiple layers of security have been implemented to ensure the security of

the Powerline MU system.

2.1.2 Bandwidth Management

Individual modems may be set for downlink and uplink sustained rates. The network

operator can also select one of eight levels of Quality of Service (QoS) for all traffic to

and from that modem or can use three Type of Service (ToS) bits (three higher order

DSCP bits), which are part of the IP header, to determine QoS of individual packets.

In either case, eight indicated priorities map to 4 classes of service, using the scheme

recommended in 802.1D. See QoS screen, Figure 44 Advanced Packet Priority.

If QoS is set manually using the Web page then it will be added as a part of the VLAN

tag, not part of the IP header.

2.1.3 Network Operations

Powerline MU provides IP address configuration, NAT configuration, and DHCP

configuration for manually or automatically obtaining IP addresses.

By default, NAT is enabled in the Modem.

Powerline MU

Page 14 of 112

2.2 POWERLINE MU PRODUCTS

The following products are available for Powerline MU networks.

Product Name Part Number

Powerline Modem (US Plug) 0171486N01

Powerline Modem (Type C Plug) 0171486N03

Powerline MU Modem (Type G Plug) 0171486N14

Powerline MU Gateway (US Plug) 0171486N11

Powerline MU Gateway (Type C Plug) 0171486N04

Powerline MU Gateway power cord (Type G Plug) 0171486N19

Powerline MU Gateway 3 capacitive cords (Type G

Plug)

0171486N20

Powerline MU Hybrid Adapter (US Plug) 0171486N02

Powerline MU Hybrid Adapter (Type C Plug) 0171486N08

Powerline MU Panel Extender 0171486N07

Powerline MU Inductive Coupler 500 0171486N21

Powerline MU Inductive Coupler 100 0171486N22

Powerline MU Inductive Coupler 250 0171486N23

Powerline MU Inductive Coupler 750

(available Q4, 2007)

TBD

2.3 ORDERING EQUIPMENT PLUG TYPES

For the Modem and Hybrid Adapters, a plug type must be specified, which will determine

the appropriate part number. See Appendix A for plug types by country to validate your

choice. US Plug and Type C plug Gateways ship with one 6-foot power cord and three 3-

foot coupling cords of the respective plug type. For Gateways using G or I plugs, one

matching power cord and one matching coupling cord kit must be specified by plug type

and ordered in addition to the Type C plug Gateway.

If, however, you plan to install the Gateway using inductive couplers, you need only order

the appropriate power cord.

Before ordering inductive couplers, please see the size chart in section 4.2.3.

Powerline MU

Page 15 of 112

3 Planning the Powerline MU Network

The Powerline MU network consists of three major design considerations:

• Canopy wireless devices

• Powerline MU devices

• Electrical distribution within the building

3.1 CANOPY WIRELESS

Careful planning of the Canopy segment of your network is essential to successful

installation. Measure distances carefully and examine the physical constraints around

the power line installations.

A site survey questionnaire is posted at

http://motorola.canopywireless.com/support/library/?region=1&cat=8

Install Canopy devices, including Backhauls (BH) as needed, Access Points (APs),

Cluster Management Modules (CMMs) as needed, and Subscriber Modules (SMs)

according to installation information provided in the Canopy System User Guide.

3.2 POWERLINE MU

The Powerline MU section of the network consists of the following Motorola Powerline

products:

• Powerline Modem – CPE and Powerline-to-Ethernet adapter

In Package:

1 Powerline Modem

1 Ethernet Cable

Powerline MU Gateway – Head-end and controller for Powerline network

In Package:

1 Powerline MU

Gateway

8 wood screws for

mounting on board or

wall

1 6’ (1.8 meters)

power cord

8 anchors for mounting

on dry wall or plaster

3 3’ (.9 meters)

capacitive

injection cords

6 small screws for

attaching mounting

brackets to Gateway

2 mounting

brackets

Powerline MU

Page 16 of 112

• Powerline MU Hybrid Adapter -- Optional Twisted Pair adapter for utilizing unused

phone lines for Gateway to Canopy Radio connectivity

In Package:

1 Powerline MU Hybrid Adapter

1 CD for changing the name and NEK of the device

• Powerline MU Panel Extender – Accessory to provide coupling between four

separate low-voltage distribution panels

In Package:

1 Powerline MU Panel Extender

Powerline MU Inductive Couplers – Accessory to provide inductive coupling between

the Powerline MU Gateway and electrical termination cabinets.

In Package:

1 Powerline MU Inductive Coupler

Three sizes available August, 2007

See size chart in section 4.2.3.

3.3 CONNECTING THE CANOPY NETWORK TO THE GATEWAY

Internet feed to the Gateway must be considered before the Gateway location is decided.

3.3.1 Ethernet from SM to Gateway

The simplest connection is from the Canopy Subscriber Module (SM) via shielded

Ethernet cable directly to the Gateway. Use straight-through shielded outdoor Ethernet

cables that adhere to Category 5 and 5e (TIA/EIA 568-B). The SM must be plugged into

an AC outlet, as it does not get power over the Ethernet cable.

Powerline MU

Page 17 of 112

This connection may not be possible because of distances limitations (100 meters) or

structural obstacles.

3.3.2 Ethernet from SM to Powerline MU Hybrid Adapter to Powerline MU Hybrid

Adapter to Gateway

Connect the SM to a Powerline MU Hybrid Adapter plugged in to an AC outlet. Use a

straight-through shielded Ethernet cable that adheres to Category 5 and 5e (TIA/EIA 568-

B). Connect a telephone wire to the RJ11 jack on the Powerline MU Hybrid Adapter and

run the telephone wire over existing twisted pair telephone wires to another Hybrid

Adapter that is near the Gateway.

Connect the second Hybrid Adapter to the Gateway using the same kind of Ethernet

cable defined above.

3.4 BUILDING ELECTRICAL CONSIDERATIONS

Most buildings have the same basic layout electrically. They all have a main feed that is

then distributed to the customer premise.

3.4.1 Main Planning

You will need to involve the building manager, a qualified electrician and, perhaps, the

local utility and a local inspector, depending on local regulations and where you

connect the Gateway.

3.4.2 Owners of Electrical Equipment

The meter or the meter bank is usually the separation between the utility (line side) and

the customer (load side). In multiple units buildings (MUs), the building typically owns all

of the equipment all the way to the transformer outside the building, except the meters.

The utility owns the meters and the outside transformer and must be included in plans

that involve gaining access to these devices.

NOTE: Typical Powerline MU installations do not require gaining access to those

devices.

3.4.3 Gateway Location

Choose the location for the MU Gateway(s) and discuss with the building management

who needs to be involved.

The closer you connect to the customer premise, the better, but remember that you will

want to connect to the point that serves the most customers with the least signal loss.

Determine the location of the broadband entrance point, which is the Internet access

device, such as the Motorola Canopy SM.

Determine how to connect the Gateway to the Internet access device:

• Ethernet (from the Motorola Canopy SM)

• Ethernet via fiber

• Powerline MU Hybrid Adapter using telephone wiring

• Other Ethernet connection

Powerline MU

Page 18 of 112

4 Installing Powerline MU

WARNING!

A qualified electrician is required to connect the Powerline MU Gateway to the electrical

panels in the building.

NOTE:

Every effort has been made to use diagrams, symbols, wiring colors and

labels that are accepted universally across all countries. In cases where that is

impossible, North American references are used in this documentation.

The following steps will guide you with your installation:

1. Gather information

You will need to gather information about the electrical system in the building in order to

design your network.

• Locate all distribution points and electrical panels on the electrical

diagram. These areas provide optimal locations for Gateway placement.

• Locate any electricity (power) meters or electricity (power) meter banks.

• Identify which areas of the building are powered by each panel.

• Identify all electrical closets and risers.

• Determine potential connectivity from the panel locations to the main

Internet access point, including telephone cable and conduit access.

2. Find or create an electrical diagram of the building.

Electrical diagrams, which provide details of the building’s electrical layout, are typically

available from the property manager or electrician Perform a site survey to know where

all the power panels are located and determine how you will connect the gateways to the

Internet access point. Be sure you know who has to be involved from an electrical

connectivity standpoint; utility, building owner, etc.

It is a requirement of the standard for electrical installations in buildings that a diagram

chart or schedule is provided, giving details of the installation. Thus such a diagram

should be available, and if any modifications are made when installing the Powerline MU,

they must be recorded.

If no electrical diagram is available, however, create one. The following symbols are often

used to denote various electrical devices and connections. Symbols may differ according

to the country of local code where the Powerline MU is being installed. For example,

“Ground” is called “Earth” in some countries. The symbols used in various countries can

be found on the International Electrotechnical Commission (IEC) website (www.iec.ch).

Powerline MU

Page 19 of 112

Figure 2 Electrical Symbols

Figure 3 Sample Diagram A

Powerline MU

Page 20 of 112

Figure 4 Sample Diagram B

Legend

(1) 3 Phase, 4 Wire (4) Sub-panel 2 (Sub-distribution Board goes to

rooms 211-220 and to rooms 311-320)

(2) Main Panel (Main Distribution Board) (5) Sub-panel 3 (Sub-distribution Board goes to

rooms 401-410 and to rooms 501-510)

(3) Sub-panel 1 (Sub-distribution Board goes to

rooms 201-210 and to rooms 301-310)

(6) Sub-panel 4 (Sub-distribution Board goes to

rooms 411-420 and to rooms 511-520)

If you create an electrical diagram, include the following information:

• Determine the feeder routes for the electrical distribution.

• Note locations of all distribution points, electrical panels and meter banks.

• Diagram which rooms are connected to which location.

• Include dimensions of the building.

• Note the number of floors.

• Include the dimensions of each floor.

• Note the number of rooms per floor.

La pagina sta caricando ...

Motorola 2700 - Car Cell Phone Manuale utente

Questo manuale è adatto anche per

Motorola 2700 - Car Cell Phone Manuale utente

in altre lingue

Altri documenti