MPR50-IEM User Manual
High performance
True diversity IEM
Receiver
SN: ________________
Rev. 02 (ref. FW v1.5)
Date: 07 April 2023
MPR50-IEM User Manual
Rev. 02
BRIEF DESCRIPTION
MPR50 is a compact true diversity receiver designed for professional in-ear monitoring
applications. This receiver features a real TRUE DIVERSITY configuration along with a unique
wideband tuning range up to 232 MHz. Audio processing can be Stereo MPX with mix-mode
function or mono FM IFB mode.
The output audio stage is especially design to have maximum audio peak-dynamic of 200 mW.
MPR50-IEM is designed to be:
•
o automatic setup functions (i.e. frequencies, scan for best channels),
o remote configuration utilities (thru infrared or micro-USB interface) using
Wisycom Manager application
o OLED display with intuitive context menu navigation
•
o MPR50-IEM-N: 470/700 MHz (TV ch 21/49)
o MPR50-IEM-M:566/798 MHz (TV ch 33/61)
•
extreme RF sensitivity and immunity and superb audio quality
•
Above a schematic with an overview of main receiver functions.
Receiver -A
Receiver -B
TrueDiversity
Control Rx1
Communic.
and control
interface
Receiver supervisor
microcontroller
and user interface
Front panel
A
B
Antennainputs
INFRARED
USB-B
RIGHT
Ear-phone
LEFT
Audio Settings
MPR50-IEM User Manual
Rev. 02
SAFETY INSTRUCTION
• Read this safety instruction and the manual first
• Follow all instructions and information.
• Do not lose this manual.
• Do not use this apparatus under the rain or near the water.
• Do not install the apparatus near heaters or in hot environments, do not use outside the
operating temperature range.
• Do not open the apparatus, only qualified service technician are enabled to operate on it.
The apparatus needs servicing when it is not properly working or is damaged by liquids,
moisture or other objects are fallen in the apparatus.
• Use only accessories or replacement parts authorized or specified by the manufacturer.
• Clean the apparatus only with dry cloths, do not use liquids.
• Report the serial number and the purchasing date in front of the manual. It is needed to
have proper replacement parts or accessories from the manufacturer.
• When replacement parts are needed, use only replacement parts authorized from the
manufacturer. Substitution with not authorized parts could result in electric shock,
hazards or fire.
• Keep attention on all the labels with warnings or hazards on the apparatus.
The apparatus is intended for professional use; anyway the manufacturer alerts the
user that the headphone output power of the apparatus could exceed the level of 85 dB(A) of
sound pressure level and this could be dangerous for the hearings. Do not use the headphone
with high power level or for long time. Reduce the power or suspend the hearing in case of any
kind of hearing problem.
MPR50-IEM User Manual
Rev. 02
BATTERIES
MPR50-IEM works with standard camera battery:
- 2xIEC-LR6 1.5 size-AA alkaline or NiMh rechargeable
- MPRLBP (lithium-ion, rechargeable, ref code CS-WMR500SL)
- Ricoh DB-50 (lithium-ion, rechargeable)
- DR9708 Duracell (lithium-ion, rechargeable)
Battery status can be checked on OLED display or looking the status of LED indicator ON.
Lithium-ion battery can be charged through
A. dedicated charger
B. integrated micro-usb-B connector
For B item, the charging status can be checked looking the status of LED indicator ON.
The receiver can be used also during the batteries charging with lithium
rechargeable batteries inside.
The receiver powered thru micro-USB without
batteries doesn't work correctly.
DO NOT operate the device with some new and some old batteries. Always replace
ALL BATTERIES.
Remember to remove the batteries when the device is not in use.
MPR50-IEM User Manual
Rev. 02
PRODUCT OVERVIEW
Upper Panel
SMA antenna Connector A and B
MPR50-IEM is supplied with two couple of antennas. According to the working band, different
antenna models can be supply. All the models have
black cap and a black label with code in white colour.
For more details see the section Accessories and Parts
Headphone Output
The audio headphone output with 3.5 mm stereo jack socket lockable (TRS).
Audio level can be adjusted with the Volume control knob and the Audio settings> Pwr. Limit
menu.
Maximum output power: 2x100mW @ 32Ω
Pin Assignment: Tip = left (hot), Ring = right (hot), Sleeve = Gnd
On/Off/Volume control
The control knob in the upper panel allows:
➢ To switch the receiver ON: turn the control knob volume control clockwise until it clicks
➢ To switch the receiver OFF: turn the control knob volume control counter clockwise until it
clicks
➢ To adjust the volume: turn the control knob volume control until the volume set has the
desired level.
➢ To disable the lock volume: turn off and turn on the receiver within 1 second.
NOTE: turn off and turn on the receiver
Antenna Code label
SMA connector Antenna B
SMA connector Antenna A
On/Off/Volume
control
Headphone Output
ON LED indicator
MPR50-IEM User Manual
Rev. 02
• within 1 second→MPR50 restarts without the initialization phase
• after 1 second →MPR50 restarts with complete initialization
Front panel
MPR50-
display.
OLED Display
The receiver has a high contrast display. Pushing one of the 4 buttons while the receiver is
active (but the display is off), turn on automatically the display. After a time-out user setting
(see Display>Off timeout menu) the display turns off automatically.
SEL & EXIT Buttons
Push the 2 buttons together to enter on the function menu
SEL Button
Push this
EXIT Button
Push this button to turn off the display.
During menu navigation push this button to exit from current menu (escape function).
SYNC/UP Button
Push and keep this button to start a synchronisation with a Wisycom transmitter (follow
instructions on display). Before starting synchronization IRDA must be enabled on Wisycom
transmitter.
During menu navigation push this button to move -up and select the previous item.
SCAN/DOWN
Button
SYNC/UP
MENU/EXIT
Button
MENU/SELECT
Button
ON Led Indicator
RF Led Indicator
Infrared Interface
(IR)
MPR50-IEM User Manual
Rev. 02
SCAN/DOWN Button
Push and keep this button to start the automatic scan.
During menu navigation push this button to move-down and select the previous item
SCAN/DOWN + SYNC/UP
If the lock volume function is enabled, press the two buttons together to lock the volume at
the desired level.
MPR50-IEM User Manual
Rev. 02
ON & RF Led Indicators (Firmware rel. v0.2)
ON
RF
WHEN
MEANING
power up
red
off
when the receiver is power on,
during the power up phase
the receiver is not ready to use,
wait the status display on display
red
off/on
when the receiver is power on,
after the power up phase
the PLL is not locked on the select
frequency, wait for lock ( about
1second or less)
Tuning phase
red
off/on
when the receiver is power on,
during a frequency change
phase (see Gr-Ch or Frequency
menu)
the PLL is not locked on the select
frequency, wait for lock
fixed
green
off
after the tuning phase, no
transmitter is received
the receiver is locked on the
select frequency, the batteries
charge is good, no transmitter is
synchronized with the receiver,
no output audio available
fixed
green
blue
after the tuning phase, a stereo
signal is received
the transmitter is correctly tuned,
the bars in the status display
show the RF levels received from
antenna A and B
fixed
green
green
after the tuning phase, a mono
signal is received
the transmitter is correctly tuned,
the bars in the status display
show the RF levels received from
antenna A and B, in the status
display M symbol appears upper
the battery level
battery status
fixed
green
on/off
the batteries charge of the
receiver is good (>25% lifetime)
the batteries charge of the
receiver is good
slow
blinking
green
on/off
the batteries charge of the
receiver is low (<25% lifetime)
change or put on charge the
batteries as soon as possible
fast
blinking
green
on/off
the batteries charge of the
receiver is very low (<12%
lifetime)
change or put on charge the
batteries immediately
red
off
battery error
change the batteries
charging status
blinking
blue
off
during batteries charging
the batteries are charging (<90%
of complete charge)
blinking
green
off
during batteries charging
of charge reached)
fixed
green
off
during batteries charging
charge complete
white
green/
blue
device in bootloader mode*
* to put the MPR50-IEM in boot mode: power on the device push and keep both UP and DOWN buttons
for few seconds (until the led indicators light up, then release the buttons)
MPR50-IEM User Manual
Rev. 02
PUTTING THE DIVERSITY RECEIVER INTO OPERATION
• Insert the batteries
• Connect the headphones
• Connect the 2 antennas on the SMA connectors
• Turn the knob control clockwise until it clicks and verify on the display the Antenna
model to use (if the connected antennas on the receiver is different from the antenna
model indicate on the display, power off the receiver and replace them with the proper
model of antennas)
• after the power up phase, the Status display is showed on the OLED display
• verify the setting and eventually adjust the settings using the Operating Menu
Status display
- Receiver Name (ex. MPR50-IEM RX)
- Group (ex. Gr:00) and Channel (ex. Ch:01)
- Frequency (ex. Fr:697.000 MHz)
- Squelch (ex. Sq:12dBuV)
- Mode (ex. Stereo)
A. RF Level Antenna A and B (range 5 ÷ 70 dBµV)
Between the two RF bars there is a dotted line where the first 3 dots indicate
6/8/10dBµV and the other 15 dots indicate the rest of the range (from 14 to 70dBµV
with step of 4dBµV
An orizzontal sign in a central row shows the setted Squelch level
B. deviation level (range of 54 dB, bar with 3dB steps; upper level= 0dB, under level =-
54dB)
the upper symbol:
indicates presence of audio output
indicates absence of audio output (RF level < Squelch)
indicate absence of audio output (no pilot tone detected)
NOTE: in case of absence of pilot tone and RF level < Squelch, the symbol will be
display
C. batteries level for MPR50-IEM receiver the upper symbol:
indicates receiving of a mono signal
S
T
M
A
B
C
CSquelch level
MPR50-IEM User Manual
Rev. 02
indicates receiving of a stereo signal
MENU
S
Preset parameters
Clone parameters
MENU
Audio
Settings
Head jack Mono/Stereo
Out mode Mono/Stereo/Mix
Balance/Mix mode
Equalizer Low (-12÷+12)
Hi (-12÷+12)
Vol. boost 0/5/10/15dB
Output load /
PWR Limit OFF/100mW/50mW
Edit RX
Gr-Ch GR (0÷39)
CH (0÷59)
Frequency N: 470.000÷700.000
M: 566.000÷798.000
Squelch OFF-0/3/6/9/12/15/18/21/24//28/32/36/40/46 dBµV
Scan
Scan now
Channel GR 00 - 39
Groups more groups (max 10)
Freq freq. Min/ freq. Max/
step (100 or 200 kHz)
Squelch scan
Scan BTN Channel/Groups/Freq
View last
Deploy
Settings
Name 12 characters
ex. RECEIVER-123
Quick Menu Bal /Mix; Clone; Ch; Vol view; OFF
Display
Contrast 0÷5
Low timeout (sec) 5÷60 steps 5
Off timeout (sec) 10÷120 steps 10 - OFF
Direction up/down
LED
Mode Full/Alams/Off
Brightness 1/2/3/4/5
Act Top Off /Led ON /Led RF /Led Only
Infrared
Sync
Advanced
Lock volume Disable/Max/Fixed
Fixed/Max Level -64 to 0 dB
Pilot Squelch Yes/No
Clone
Add 00÷23
Load default/0/...
Delete 00÷23
Delete all
OP Mode IEM/IFB
Info
Model MPR50-I
Range 470÷700
Serial xxxxxxx
FW
HW Version 1
Option N
Battery 2.36 Volt
Errors 0
Preset Restore 1/2/3/4/5/6/Factory
Save 1/2/3/4/5/6
MPR50-IEM User Manual
Rev. 02
From Status Display push SEL and EXIT together to enter on the
Main menu
Use UP/DOWN to navigate on all available menus
Push SEL to select a menu item
Use UP/DOWN to move on the different parameters of the menu
Push SEL to modify the parameter menu
Use UP/DOWN to change the parameter value
Keep push SEL to save changing
Push EXIT to return on the Main Menu
Push EXIT to return on the Status display
Audio settings
The Audio settings menu allows to configure the audio output.
PARAMETER
SETTING
MEANING
Head jack
Mono/Stereo
Select Mono or Stereo according to the jack headphone
connector used.
Out mode
Stereo
The left and right signals are available as usual. The Balance
setting serves to adjust the balance between the left and right
stereo signal.
Mono
The left-right signals are mixed and are available as a mono
signal in both headphone channels.
Mix
The left-right signals are mixed and are available as a mono
signal in both headphone channels.
The Mix mode setting serves to adjust the relative levels of
the two separate channels in the mixer mono signal.
Balance
Use the Up and Down arrows to change the balance
between Left and Right channel (available only with Out
Mode sets on Stereo)
Mix mode
Use the Up and Down arrows to change the mix between
Channel1 and Channel2 (available only with Out Mode sets
on Mix)
Equalizer
Low and High
frequencies
-12dB/+12dB
1dB steps
This menu allows to of adjusting the gain of low and high
frequency components (bass and treble) within the audio
signal.
1. Push UP/DOWN button to increase/decrease the
gain of the Low frequencies (50Hz)
2. Push SEL button to shift on High frequencies,
3. Push UP/DOWN button to increase/decrease the
gain of the High frequencies (10kHz)
4. Keep push SEL button to SAVE
MPR50-IEM User Manual
Rev. 02
Vol. boost
0/5/10/15dB
This menu allows to increase or decrease the volume of the
output headphones, selectable from 0dB to 15 dB. Set the
appropriate volume boost and then adjust the volume with
the control knob.
Output load
Set the Output load according to the impendence of the
headphones connected
Pwr limit
OFF (only using lithium
battery) / 100mW /
50mW
This menu allows to limit the power output. If set to OFF(only
lithium battery), there is no power limit control. If set to OFF
using alkaline or NiMH batteries, the receiver set
automatically the max value permitted (100mW)
NOTE: When the volume knob is rotated, appears a screen with a
volume bar and the values of Pwr limit, Outpul load and Vol. boost
Edit RX
The Edit RX menu allows to configure the radio frequency settings.
PARAMETER
SETTING
MEANING
Gr-Ch
0÷39 groups
0÷59 channels
Select current group and channel. Group name and channel
frequency are displayed on the right.
Frequency
470÷700 MHz
for MPR50-IEM-N
566÷798 MHz
for MPR50-IEM-M
If the specific group/channel is not locked, the frequency
can be edited in this menu.
Squelch
OFF or
0/3/6/9/12/
15/18/21/
24/28/32/
36/40/46dBuV
This menu allows to disable the RF squelch or to setup the
desired squelch level in dBuV (note 0 dBuV is equal to -107
dBm).
Scan
It allows making three types of scan over a desired channel,
group or frequency. MPR50-IEM manages up to 2400
custom frequencies organized in 40 groups of 60 channels
each. This extreme flexibility makes the scan function very
flexible.
This function can be called also using the dedicated
DOWN&SEL buttons pushed together.
Squelch scan indicates the threshold below which a
channel is considered as free or almost free.
Scan BTN is the parameter to set the rapid function called
pressing DOWN&SEL buttons together.
MPR50-IEM User Manual
Rev. 02
View last allows to see the result of the last scan
operation.
Deploy allows to send to a MTK952 the last scan.
of the
last scan and choose the frequency to tune.
(*)As per Wisycom standard, group 00 and group 01 or 09 are special; respectively the “center
frequency” (474,482/ MHz) and the intergap frequency (i.e. 470/478/486/ MHz). A scan on group
00 will reveal in few seconds the overall DVB-T occupation on the area, while a scan on group 01 will
give possible working frequency, usable also in presence of strong DVB-T signal (sort to speak working
in the band-guard of 2 digital television channels).
“Scan now” menu
The following table lists the three types of scans that can be performed
Channel
Once started a Channel scan operation the receiver asks for
group to be used*. Press and hold the SEL button to select the
group to scan.
Then it prompts to turn off all transmitters.
So press SEL to start the scan!
After few seconds, scan results are displayed sorted by level,
making easier to pick up the best one.
The dotted line in the graph indicate the squelch threshold.
Under the graph are reported the following parameters:
- Ch: Channel
- Rank: Ranking position
- Freq: Frequency
- Lev: RF level
Pushing simultaneously UP and DOWN button, the results can
be also displayed on a chart in ascending order according to the
number of the channel.
MPR50-IEM User Manual
Rev. 02
After the selection of the desired channel, a screen appears
with the selected frequency, channel and group and it is
possible to Set or Synchronize the receiver with the transmitter.
We recommend setting the frequency and then synchronize it
with the transmitter.
Groups
If the scan is done on Groups, you can choose a maximum of 10
groups from among the 40 groups shown in the table (Press the
SEL button to select and press it again to deselect).
In the upper left shows the number of the selected group and
the number of selected groups, while in the upper right corner
there is the item "START" to start the scan.
To select START, go to the box 39 and press the "UP" button or
go to the box 0 and press the "DOWN" button, so press SEL to
run the scansion.
Then it prompts to turn off all transmitters.
So press SEL to start the scan!
After few seconds, scan results are displayed on a histogram.
Each column of the histogram is divided into two parts by a
black line. The lower part indicates the number of free channels
(RF level < Squelch level - 6dBµV) in the group, while the upper
one the number of channels almost free
(Squelch level < RF level < Squelch level - 6dBµV).
We recommend to choose the group with the highest number
of free channels.
Press SEL to select the desiderate group and choose the channel
as in Channel scan
After the selection of the desired channel, a screen appears
with the selected frequency, channel and group and it is
possible to Set or Synchronize the receiver with the transmitter.
We recommend setting the frequency and then synchronize it
with the transmitter.
MPR50-IEM User Manual
Rev. 02
Freq
The Frequency scan allows to select a range of frequency to
scan, between a maximum and a minimum value and the step
with which to perform the scans. Press and hold the SEL button
to confirm.
Then it prompts to turn off all transmitters.
So press SEL to start the scan!
After few seconds, scan results are displayed on a chart in
ascending order according to the frequency (step 1MHz). The
dotted line in the graph indicate the squelch threshold.
s possible to
zoom the graph to show all the steps of scan
After the selection of the desired frequency, a screen appears
with the selected frequency and the RF level and it is possible
to Set or Synchronize the receiver with the transmitter. We
recommend setting the frequency and then synchronize it with
the transmitter.
MPR50-IEM User Manual
Rev. 02
Settings
The Settings menu allows to configure main settings of the device.
PARAMETER
SETTING
MEANING
Name
12 case-sensitive alphanumeric
characters
The name menu allows to change the name of the
receiver. This is the name displayed in the top of the
Status display and it is the name sent to the
transmitter with the sync function (for the
transmitter with this advanced capability).
Use the UP/DOWN buttons to change the selected
character and push SEL button to switch to the next
character.
Quick
Menu
Bal/Mix ; Clone ; Ch; Volume
view; Off
The quick menu is displayed pushing UP or DOWN
buttons when the receiver is on the Status display.
Set to Bal/Mix to enter quickly to the Balance/Mix
mode menu (according to the Out mode
configured).
Set to Clone to enter into Load
menu.
Set to Channel -
menu.
Set to Volume view to view quickly the Volume
screen
Set to Off
and UP or DOWN buttons are pushed, nothing
happens).
Display
Contrast
0÷5
Change contrast display from 0 (min) to 5 (max).
Low timeout
5÷60 (steps 5)
Low timeout sets the timeout from 5 to 60 seconds
(5sec steps) to decrease the brightness display.
Off timeout
10÷120 (steps 10)
or OFF
Off timeout sets the timeout from 10 to 120
seconds in 10 sec. steps to turn off the display.
With OFF setting the display never turns off.
Direction
up/down
To change direction of display
LED
Mode
Full
Alarm
OFF
3 LED setting are available:
Full: LED indicators works normally;
Alarm: LED indicators lights up only when an alarm
happened;
OFF: LED indicators remain off.
Brightness
1/2/3/4/5
Act Top
OFF
LED ON
LED RF
LED ONLY
To change the behavior of the LED on the top (near
the headphone connector)
MPR50-IEM User Manual
Rev. 02
Infrared
By this menu, MPR50-IEM can be connected to IRDA for setup or firmware upgrades.
When the Infrared interface is active, the following screen is displayed.
NOTE: while in this menu display is not automatically turned off.
Sync
The SYNC function is useful to tune a transmitter on the same
frequency of the receiver via the IR interface. Before starting the sync
function tune the receiver on desired channel, manually or using the
SCAN utility. After this, enable the IR interface on the transmitter.
Now press UP&EXIT buttons together or enter in the Sync menu to
start the SYNC function. Keep the IR window of the transmitter in
front of the IR window of the receiver and, as soon as the connection is done, the receiver will send to
the transmitter all the information needed.
If the operation is not possible, (i.e. the frequency range of the transmitter is not compatible with the
frequency of the receiver), the display will show an error message.
If the transmitter function is completed it will show
the same name of the synchronized receiver.
Advanced
The Advanced menu allows to manage advanced settings.
PARAMETER
SETTING
MEANING
Lock volume
Disable / Max / Fixed
Thanks to this menu it is possible to lock the
volume potentiometer to a fixed value or limit the
volume to a maximum value.
Set to disable
volume
Fixed/Max Level
-64 to 0dB
Use this menu to set
- the Max level is Lock Volume is set to Max
- the Fixed level is Lock Volume is set to Fixed
Pilot Squelch
Yes / No
When the Pilot tone is enabled, the audio output is
muted unless the correct carrier is detected
(19kHz).
When the Pilot tone is disable, the audio output is
muted if RF level < Squelch level.
For the presence/absence of audio output, check
the upper symbol in the status display.
MPR50-IEM User Manual
Rev. 02
Clone *
Add
00÷23
To add a clone
Load
Default/00÷23
To load a clone *
Delete
00÷23
To delete a clone *
Delete all
To delete all the clones *
* It appears if exist at least a1 clone
OP mode
IEM/IFB
This menu allows to change the type of operation
between:
- IEM: that is a stereo transmission, MPX decoding
with 19 kHz sync carrier
- IFB: that is a mono transmission with 100 kHz
bandwidth (narrowband)
NOTE: remember to set the pilot squelch to No
when set to IFB!
* A clone is a partial configuration of the MPR50-IEM which can be copied from a receiver to another
using the IRDA interface. It consists of the same parameters of pre-set configuration for less than
display, quick menu and headphones parameters (see the Operating menu for more details).
From firmware version v1.3 the MPR50-IEM is able to manage up to 24 clones (from 00 to 23). The
menus of the clone management allow to add/load and delete a clone.
How to add a clone
Out mode
Balance
Equalizer
Vol boost
Pilot tone
Gr-Ch
Squelch
RX Name
Clone name
Enable the IRDA interface on the RX from
which take the configuration (Infrared menu)
Enter in the Add menu and select the
wanted clone number. Then push SEL
to start the IRDA communication.
Put the receivers face
to face
At the end of the process the name
of the clone will be identify with the
name of the receiver.
MPR50-IEM User Manual
Rev. 02
How to load a clone
Use Clone>Load menu or UP/DOWN button (if the quick menu is configured to clone) to load a
clone. Afterwards push the arrows to change clone, SEL to activeted the clone and EXIT to exit
without changing.
Ex.
The configuration saved before the loading of the clone is saved
on the clone default, therefore loading the default
allows to return with the previous settings. The following
arrows displayed near the clone number indicates the currently
clone loaded.
Loading a clone, all the clone parameters are set on the receiver. The follow icon appears on the
right of the display indicating that a clone is loaded. The number and the name of the clone are
displayed on the top of the display menu and a brief list of the main parameters are displayed on the
status menu.
NOTE: the clones are saved on the EPROM and remains saved also after a reboot of the device.
NOTE: If a clone is loaded and then a reboot is executed, the MPR50-IEM always restarts with the
previous configuration (default clone).
NOTE: When a clone is loaded, it's not possible change the parameters
using Lithium battery, the power limit is set automatically to the max value permitted for no lithium
battery (that is 100mW).
Name of the clone
symbol to indicate that a
clone is loaded
is loaded
Number of the clone
Main parameters
MPR50-IEM User Manual
Rev. 02
Info
the INFO function shows many important features or information of MPR50-IEM receiver:
PARAMETER
MEANING
example
Model
Wisycom receiver model
MPR50-IEM
Range
Frequencies range of working
470-700
Serial
Serial number
S2334437
FW
Version *
Firmware version
V1.6
BL
Bootloader version
V1.4d
App
Application version
V1.63d
HW
Version
Hardware version
6
Option
MPR50-IEM Options
N= freq. range
470 ÷ 700 MHz
,
M= freq. range
566 ÷ 798 MHz
N
Battery
Batteries voltage
3.71 Volt
Errors
Number of errors.
If the number of errors is > 0 push SEL button to enter on the
Errors list. For each error a brief description and the error code is
showed. For more information, please see the Error List section.
4
* The Firmware Version recaps BL (Bootloader Version) and App (Application version).
Preset
This menu allows to load/save 6 user presets or load the Factory configuration.
PARAMETER
SETTING
MEANING
Restore
1/2/3/4/5/6/Factory
Select the Restore submenu and chose the
presets to load: user presets or Factory preset.
Push and keep SEL button to load the preset.
Save
1/2/3/4/5/6
Select the Save submenu and chose the user
presets to save. Push and keep SEL button to
save the preset
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
