Aeg-Electrolux F35010IW Manuale utente

FAVORIT 35010 I

User manual Dishwasher

Istruzioni per l’uso Lavastoviglie

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 3

Safety information 3

Correct use 3

General safety 3

Child safety 3

Installation 4

Product description 4

Control panel 5

Programme knob and On/Off indicator light

6

First use 6

Set the water softener 6

Setting manually 7

Setting electronically 7

Use of dishwasher salt 8

Use of rinse aid 8

Adjusting the dosage of rinse aid 9

Daily use 10

Load cutlery and dishes 10

The lower basket 11

The cutlery basket 11

The upper basket 12

Adjusting the height of the upper basket

13

Use of detergent 13

Fill with detergent 14

Use of combi detergent tablets 15

Washing programmes 15

Select and start a washing programme 16

Setting and starting the programme with

"delay start" 16

Unloading the dishwasher 17

Care and cleaning 18

Cleaning the filters 18

Cleaning the spray arms 19

External cleaning 19

Internal cleaning 19

Prolonged periods of non-operation 19

Frost precautions 19

Moving the machine 20

What to do if… 20

Technical data 21

Hints for test institutes 22

Installation instructions 23

Installation 23

Fixing to the adjacent units 23

Levelling 23

Water connection 23

Water supply connections 23

Water inlet hose with safety valve 24

Water outlet hose connection 24

Electrical connection 25

Environment concerns 26

Packaging material 26

Subject to change without notice

2

Contents

Operating instructions

Safety information

In the interest of your safety and to ensure the correct use, before installing and first using

the appliance, read this user manual carefully, including its hints and warnings. To avoid

unnecessary mistakes and accidents, it is important to ensure that all people using the

appliance are thoroughly familiar with its operation and safety features. Save these in-

structions and make sure that they remain with the appliance if it is moved or sold, so that

everyone using it through its life will be properly informed on appliance use and safety.

Correct use

• This dishwasher is only intended for washing household utensils suitable for machine

washing.

• Do not put any solvents in the dishwasher. This could cause an explosion.

• Knives and other items with sharp points must be loaded in the cutlery basket with their

points down or placed in a horizontal position in the upper basket.

• Only use products (detergent, salt and rinse aid) suitable for dishwashers.

• Avoid opening the door whilst the appliance is in operation, hot steam may escape.

• Do not take any dishes out of the dishwasher before the end of the dishwashing cycle.

• After use, isolate the appliance from the power supply and turn off the water supply.

• This product should be serviced only by an authorised service engineer, and only genuine

spare parts should be used.

• Under no circumstances should you attempt to repair the machine yourself. Repairs

carried out by inexperienced persons will cause injury or serious malfunctioning. Contact

your local Service Force Centre. Always insist on genuine spare parts.

General safety

• Persons (including children) with reduced physical sensory, mental capabilities or lack

of experience and knowledge must not use the appliance. They must have supervision

or instruction for the operation of the appliance by a person responsible for their safety.

• Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could en-

danger life! Comply with the safety instructions of the dishwasher detergent manufac-

turer.

• Water in the dishwasher is not for drinking purposes. Detergent residue may still be

present in your machine.

• Ensure that the door of the dishwasher is always closed when it is not being loaded or

unloaded. In this way you will avoid anybody tripping over the open door and hurting

themselves.

• Do not sit or stand on the open door.

Child safety

• This appliance is designed to be operated by adults. Don’t allow children to use the

dishwasher unsupervised.

• Keep all packaging well away from children. There is risk of suffocation.

• Keep all detergents in a safe place out of children’s reach.

Safety information

3

• Keep children well away from the dishwasher when the door is open.

Installation

• Check your dishwasher for any transport damage. Never connect a damaged machine.

If your dishwasher is damaged contact your supplier.

• All packaging must be removed before use.

• Any electrical and plumbing work required to install this appliance must be carried out

by a qualified and competent person.

• For safety reasons it is dangerous to alter the specifications or attempt to modify this

product in any way.

• Never use the dishwasher if the electrical supply cable and water hoses are damaged; or

if the control panel, work top or plinth area are damaged such that the inside of the

appliance is freely accessible. Contact your local Service Force centre, in order to avoid

hazard.

• All sides of the dishwasher must never be drilled to prevent damage to hydraulic and

electric components.

WARNING!

For electrical and water connection carefully follow the instructions given in specific para-

graphs.

Product description

1 Upper basket

2 Water hardness dial

3 Salt container

4 Detergent dispenser

4

Product description

5 Rinse aid dispenser

6 Rating plate

7 Filters

8 Lower spray arm

9 Upper spray arm

Control panel

1

Programme knob

2

START/RESET button

3

Delay start button

4

Indicator lights

5

On/Off indicator light

6

Programme marker

Indicator lights

Wash

Illuminates when the washing and rinsing pha-

ses are running.

Dry

Illuminates when the drying phase is running.

End of programme

Illuminates when the washing programme has

ended. It also has added functions of visual sig-

nalling as:

• the setting of the water softener,

• intervention of an alarm due to the malfunc-

tion of the machine.

Salt refilling

1)

Illuminates when special salt needs to be filled.

Rinse aid

1)

Illuminates when rinse aid needs to be filled.

Control panel

5

Indicator lights

1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling

with salt and rinse aid is necessary.

Programme knob and On/Off indicator light

•

The selection of a washing programme occurs by turning the programme knob clock-

wise or anticlockwise, until the programme marker, placed on the knob, corresponds

with the desired washing programme indicated on the control panel.

The On/Off indicator light illuminates (position ON)

•

To switch off the appliance turn the programme knob until the programme marker

corresponds with the On/Off indicator light. The On/Off indicator light turns off

(position OFF).

With the programme knob it is also possible to set the level of the water softener.

First use

Before using your dishwasher for the first time:

• Ensure that the electrical and water connections comply with the installation instruc-

tions

• Remove all packaging from inside the appliance

• Set the water softener

• Pour 1 litre of water inside the salt container and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent tablets ("3 in 1", "4 in 1", "5 in 1" etc... ) follow the

instructions given in "Use of detergent".

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts

from the water supply, which would have a detrimental or adverse effect on the operation

of the appliance.

The higher the content of these minerals and salts, the harder your water is. Water hardness

is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l

(millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your

local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and

electronically.

6

First use

Water hardness Adjusting the water hardness

setting

Use of salt

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes

23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes

19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes

15 - 18 26 - 32 2,6 - 3,2 1 level 4 yes

11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes

4 - 10 7 - 18 0,7 - 1,8 1 level 2 yes

< 4 < 7 < 0,7 1 level 1 no

Setting manually

The dishwasher is factory set at position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the dish-

washer.

3. Turn the water hardness dial to position 1

or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5.

1. The dishwasher must be switched off.

Keep the START/RESET button pressed and turn the programme knob clockwise until

the programme marker corresponds with the first washing programme.

2.

Release the START/RESET button , the On/Off and START/RESET indicator lights

start to flash indicating that you have activated the water softener setting function.

3.

At the same time, the end of programme indicator light starts to flash.

The current level is indicated by the number of flashes of end of programme indicator

light and a pause of about 3 seconds.

Examples:

5 flashes, pause, 5 flashes, pause, etc... = level 5

6 flashes, pause, 6 flashes, pause, etc... = level 6

4.

To change the level, press the START/RESET button . Each time the button is pressed

the level changes.

Set the water softener

7

Examples:

if the current level is 5, by pressing START/RESET button once, level 6 is selected.

if the current level is 10, by pressing START/RESET button once, level 1 is selected.

5.

To memorize the operation, switch off the dishwasher by returning the programme

knob to the Off position.

Use of dishwasher salt

WARNING!

Only use salt specifically designed for use in dishwashers. All other types of salt not spe-

cifically designed for use in a dishwasher, especially table salt, will damage the water soft-

ener. Only fill with salt just before starting one of the complete washing programmes. This

will prevent any grains of salt or salty water, which may have been spilt, remaining on the

bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the cap of the salt container by

turning it anticlockwise.

2.

Pour 1 litre of water inside the container (this is necessary only before filling with

salt for the first time) .

3. Using the funnel provided, pour in the salt

until the container is full.

4. Replace the cap making sure that there is

no trace of salt on the screw thread or on

the gasket.

5. Replace the cap tightly turning it clock-

wise until it stops with a click.

Do not worry if water overflows from the unit

when filling with salt, this is quite normal.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the

salt has been replenished, assuming the dishwasher remains switched on. If you are using

salts that take longer to dissolve then this can take longer. The function of the machine is

not affected.

Use of rinse aid

WARNING!

Only use branded rinse aid for dishwashers.

Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent,

liquid detergent). This would damage the appliance.

Rinse aid ensures thorough rinsing, and spot and streak free drying.

Rinse aid is automatically added during the last rinse.

8

Use of dishwasher salt

1. Open the container by pressing the release

button (A).

2. Add the rinse aid in the container. The

maximum level for filling is indicated by

"max".

The dispenser holds about 110 ml of rinse

aid, which is sufficient for between 16 and

40 dishwashing cycles, depending upon

the dosage setting.

3. Ensure that the lid is closed after every re-

fill.

Clean up any rinse aid spilt during filling with

an absorbent cloth to avoid excess foaming

during the next wash.

Adjusting the dosage of rinse aid

According to the finish and drying results obtained, adjust the dose of rinse aid by means

of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage).

The dose is factory set in position 4.

Increase the dose if there are drops of water or lime

spots on the dishes after washing.

Reduce it if there are sticky whitish streaks on the

dishes or a bluish film on glassware or knife blades.

Use of rinse aid

9

Daily use

• Check if it's necessary to refill with dishwasher salt or rinse aid.

• Load cutlery and dishes into the dishwasher.

• Fill with dishwasher detergent.

• Select a wash programme suitable for the cutlery and dishes.

• Start the wash programme.

Load cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the

dishwasher.

• Before loading the dishes, you should:

– Remove all left over food and debris.

– Soften remnants of burnt food in pans

• When loading the dishes and cutlery, please note:

– Dishes and cutlery must not impede the rotation of the spray arms.

– Load hollow items such as cups, glasses, pans, etc. with the opening downwards so

that water cannot collect in the container or a deep base.

– Dishes and items of cutlery must not lie inside one another, or cover each other.

– To avoid damage to glasses, they must not touch.

– Lay small objects in the cutlery basket.

• Plastic items and pans with non stick coatings have a tendency to retain water drops;

these items will not dry as well as porcelain and steel items.

• Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they

do not move.

For washing in the dishwasher the following cutlery and dishes

are not suitable: are of limited suitability:

• Cutlery with wooden, horn, china or mother-

of-pearls handles.

• Plastic items that are not heat resistant.

• Older cutlery with glued parts that are not

temperature resistant.

• Bonded cutlery items or dishes.

• Pewter or copper items.

• Lead crystal glass.

• Steel items prone to rusting.

• Wooden platters.

• Items made from synthetics fibres.

• Only wash stoneware in the dishwasher if it

is specially marked as being dishwasher-safe

by the manufacturer.

• Glazed patterns may fade if machine washed

frequently.

• Silver and aluminium parts have a tendency

to discolour during washing: Residues, e.g.

egg white, egg yolk and mustard often cause

discolouring and staining on silver. Therefore

always clean left-overs from silver immedi-

ately, if it is not to be washed straight after

use.

Open the door and slide out the baskets to load the dishes.

10

Daily use

The lower basket

Load larger and heavily soiled dishes and pans in

the lower basket.

To make it easier to load larger dishes, the 2 plate

racks on the right in the lower basket can be folded

down.

The cutlery basket

WARNING!

Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp

items of cutlery such as carving knives must be positioned horizontally in the upper basket.

Take care when loading or unloading sharp items such as knives.

To ensure that all items of cutlery in the cutlery basket can be reached by the water, you

should:

Load cutlery and dishes

11

1. Place the grid insert on the cutlery basket.

2. Place forks and spoon in the cutlery basket

with their handles pointing downwards.

For larger utensils, such as whisks, leave off

one half of the cutlery grid.

The upper basket

Load smaller, fragile crockery and long, sharp cut-

lery in the upper basket.

• Arrange items of crockery on and under the

folding cup racks so that they are offset from

each other and water can reach all items.

12

Load cutlery and dishes

• The cup racks can be folded up out of the way

for tall crockery items.

• Lay or hang wine and brandy glasses in the

slots in the cup racks.

Adjusting the height of the upper basket

Maximum height of the dishes in:

the upper basket the lower basket

With upper basket raised 22 cm 30 cm

With upper basket lowered 24 cm 29 cm

The height of the upper basket can also be adjusted when it is loaded.

Raising / lowering the upper basket:

1. Pull out the upper basket completely.

2. Holding the upper basket by the handle,

raise it as far as it will go and then lower

it vertically.

The upper basket will latch into the lower

or the upper position.

WARNING!

After loading your machine always close the

door, as an open door can be a hazard.

Before closing the door, ensure that the spray

arms can rotate freely.

Use of detergent

Only use detergents specifically designed for use in dishwashers.

Please observe the manufacturer's dosing and storage recommendations as stated on the

detergent packaging.

Using no more than the correct amount of detergent contributes to reducing pollution.

Use of detergent

13

Fill with detergent

1. Open the lid.

2. Fill the detergent dispenser (1) with deter-

gent. The marking indicates the dosing

levels:

20 = approximately 20 g of detergent

30 = approximately 30 g of detergent.

3. All programmes with prewash need an ad-

ditional detergent dose (5/10 g) that must

be placed in the prewash detergent cham-

ber (2).

This detergent will take effect during the

prewash phase.

4. When using detergent tablets, place the

tablet in compartment (1)

5. Close the lid and press until it locks in

place.

Detergent tablets

Detergent tablets from different manufac-

tures dissolve at different rates. For this reason,

some detergent tablets do not attain their full

cleaning power during short washing pro-

grammes. Therefore, please use long washing

programmes when using detergent tablets, to

ensure the complete removal of detergent re-

siduals.

14

Use of detergent

Use of combi detergent tablets

These products are detergents with a combined cleaning, rinsing and salt functions. They

can also contain other different agents depending on which kind of tablets you choose («3

in 1», «4 in 1», «5 in 1» etc...).

1. Check whether these detergents are suitable for your water hardness. See the manu-

facturers instructions.

2. Select the lowest setting for water hardness and rinse aid dosage.

3. Before the start of the washing programme put the combi detergent tablet in the

detergent dispenser.

The refilling of the salt container and the rinse aid dispenser are no longer necessary. In

this case the rinse aid indicator light will always remain illuminated when the machine is

switched on (not all dishwasher models are foreseen with rinse aid indicator light).

If the drying results are not satisfactory we recommend that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosage to position 2.

If you decide to turn back to the use of the standard detergent system we advise

that you:

1. Fill up the dispensers for salt and rinse aid again.

2. Adjust the water hardness setting to the highest setting and perform washing pro-

gramme without loading any dishes.

3. Adjust the water hardness setting according to the hardness of the water in your area.

4. Adjust the rinse aid dosage.

Washing programmes

Programme Degree of

soil

Type of load Programme description Consumption val-

ues

1)

Prewash

Main wash

Intermediate rinse

Final rinse

Drying

Duration (minutes)

Energy (kWh)

Water (litres)

INTENSIV

CARE 70°

Heavy soil Crockery,

cutlery, pots

and pans

2 x

120 - 130

1,8 -2,0

22 - 24

30 MIN

2)

Light soil Crockery and

cutlery

30

0,9

9

NORMAL 65° Normal soil Crockery and

cutlery

2 x

105 - 115

1,5 - 1,7

23 - 25

Washing programmes

15

Programme Degree of

soil

Type of load Programme description Consumption val-

ues

1)

Prewash

Main wash

Intermediate rinse

Final rinse

Drying

Duration (minutes)

Energy (kWh)

Water (litres)

ECO 50°

3)

Normal soil Crockery and

cutlery

130 - 140

1,0 - 1,2

14 - 16

PREWASH Any Partial load

(to be com-

pleted later in

the day)

4)

12

0,1

5

1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water

and also by the variations of the power supply and the amount of dishes.

2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs

of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.

3) Test programme for test institutes.

4) This programme does not require the use of detergent

Select and start a washing programme

1. Check that the baskets have been loaded correctly and that the spray arms are free to

rotate

2. Check that the water tap is opened

3. Close the dishwasher’s door.

4. Turn the programme knob until the programme marker corresponds with the desired

programme (see "Washing programmes" chart).

–

The On/Off indicator light illuminates.

– The indicator lights of the phases foreseen for the programme start flashing.

5.

Press the START/RESET button, the programme starts automatically and the START/

RESET indicator light illuminates.

– As soon as the programme starts, the phase indicator lights turn off except for the

indicator light for the phase in progress which will remain lit.

During the running of the programme, it is not possible to change the selection made by

turning the programme knob in correspondence of another programme or the Off position.

If you want to change the running programme you must cancel the selection made (see

"Cancel a washing programme in progress").

Setting and starting the programme with "delay start"

• Allows the start of the programme to be delayed by 3 hours.

1.

After having selected the washing programme, press the delay start button.

– The corresponding indicator light illuminates.

16

Select and start a washing programme

2.

Press the START/RESET button, the countdown of the delay start begins automatically.

– The phase indicator lights turn off.

– Opening the door will interrupt the countdown. Once the door is closed the count-

down will continue from the point at which it was interrupted

– Once the delay start has elapsed, the washing programme will start automatically,

the delay start indicator light turns off, while the indicator light of the phase in

progress illuminates.

Cancelling the "delay start"

•

Press the START/RESET button for about 5 seconds, the indicator lights of START/RESET

and delay start buttons turn off while the indicator lights of the phases start flashing.

To start the selected washing programme press the START/RESET button.

The washing programme or the countdown of the delay start will begin only after having

pressed the START/RESET button. Until that moment it is possible to modify the selection

made.

WARNING!

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely nec-

essary. Attention! Hot steam may escape when the door is opened. Open the door

carefully.

Interrupt a washing programme in progress:

• Open the dishwasher door; the programme will stop. Close the door; the programme will

start from the point at which it was interrupted.

Cancel a washing programme in progress

•

Press the START/RESET button for about 5 seconds. The START/RESET indicator

light turns off and the phase indicator lights are flashing. The running programme has

been cancelled and it is now possible to set a new washing programme or switch off the

machine. If a new washing programme is to be selected, check that there is detergent

in the detergent dispenser.

End of the washing programme

• The dishwasher will automatically stop.

•

The end of programme indicator light will illuminate.

1. Switch off the dishwasher by returning the programme knob to the Off position. The

On/Off indicator light turns off.

2. Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the

dishes; in this way they will be cooler and the drying will be improved.

Unloading the dishwasher

• Hot dishes are sensitive to knocks.

The dishes should therefore be allowed to cool down before removing from the appliance.

• Empty the lower basket first and then the upper one; this will avoid water dripping from

the upper basket onto the dishes in the lower one.

• Water may appear on the sides and the door of the dishwasher as the stainless steel will

eventually become cooler than the dishes.

Unloading the dishwasher

17

CAUTION!

When the washing programme has finished, it is recommended that the dishwasher is

unplugged and the water tap turned off.

Care and cleaning

Cleaning the filters

The filters must be checked and cleaned from time to time. Dirty filters will degrade the

washing result.

WARNING!

Before cleaning the filters ensure that the machine is switched off.

1. Open the door, remove the lower basket.

2. The dishwasher filter system comprises a

coarse filter (A), a microfilter (B) and a flat

filter. Unlock the filter system using the

handle on the microfilter, and remove the

filter system.

3. Turn the handle about 1/4 a turn anti-

clockwise and remove the filter system.

4.

Take hold of the coarse filter (A) by the

handle with the hole and remove from the

microfilter (B).

5. Clean all filters thoroughly under running

water.

18

Care and cleaning

6. Remove the flat filter from the base of the

washing compartment and clean both

faces thoroughly.

7. Put the flat filter back in the base of the

washing compartment and ensure that it

fits perfectly.

8.

Place the coarse filter (A) in the microfilter

(B) and press together.

9. Put the filter combination in place and

lock by turning the handle clockwise to the

stop. During this process ensure that the

flat filter does not protrude above the base

of the washing compartment.

WARNING!

NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters

will produce poor washing results and may result in damage to the appliance.

Cleaning the spray arms

NEVER try to remove the spray arms.

If residues of soil have clogged the holes in the spray arms, remove them with a cocktail

stick.

External cleaning

Clean the external surfaces of the machine and control panel with a damp soft cloth. If

necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent

(acetone, trichloroethylene etc....).

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned

regularly with a damp cloth.

We recommend every 3 months to run the wash programme for heavy soiled dishes using

detergent but without dishes.

Prolonged periods of non-operation

If you are not using the machine for any prolonged period of time you are advised to:

1. Unplug the appliance and then turn off the water.

2. Leave the door ajar to prevent the formation of any unpleasant smells.

3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature is below 0°C. If this is

unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe

and empty it.

Care and cleaning

19

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.

What to do if…

The dishwasher will not start or stops during operation. Certain problems are due to the

lack of simple maintenance or oversights, which can be solved with the help of the indi-

cations described in the chart, without calling out an engineer.

Switch off the dishwasher and carry out the following suggested corrective actions.

Fault code and malfunction Possible cause and solution

•

continuous flashing of the START/RESET in-

dicator light

•

1 flash of the end of programme indicator

light

The dishwasher does not fill with water

• The water tap is blocked or furred with lime-

scale

Clean the water tap

• The water tap is turned off

Turn the water tap on

• The filter (where present) in the threaded hose

fitting at the water inlet valve is blocked

Clean the filter in the threaded hose

• The water inlet hose has not been correctly

laid or it is bent or squashed

Check the water inlet hose connection

•

continuous flashing of the START/RESET in-

dicator light

•

2 flashes of the end of programme indica-

tor light

The dishwasher will not drain

• The sink spigot is blocked

Clean out the sink spigot

• The water drain hose has not been correctly

laid or it is bent or squashed

Check the water drain hose connection

•

continuous flashing of the START/RESET in-

dicator light

•

3 flashes of the end of programme indica-

tor light

• Anti-flood device is activated

Close the water tap and contact your local Serv-

ice Force Center.

• The programme does not start • The dishwasher’s door has not been properly

closed

Close the door

• The main plug is not plugged in

Insert the main plug

• The fuse has blown out in the household fuse

box

Replace the fuse

• Delay start has been set

If dishes are to be washed immediately, cancel

the delay start

20

What to do if…

La pagina sta caricando ...

Aeg-Electrolux F35010IW Manuale utente

Questo manuale è adatto anche per

Aeg-Electrolux F35010IW Manuale utente

in altre lingue

Documenti correlati

Altri documenti