Electrolux ESF656W Manuale utente

Categoria
Lavastoviglie
Tipo
Manuale utente

Questo manuale è adatto anche per

Dishwasher
User Instructions
ANC 822 945 702 - 00 - 0801
ESF 656
EN
2
Dear customer,
Please read these user instructions carefully.
Above all please observe the safety instructions on
the first few pages ofthese user instructions! Please
keep these user instructions for later reference. Pass
them on to any subsequent owner of the appliance.
1
The warning triangle and/or specific words
(Warning!, Caution!, Important!) are used
to highlight instructions that are important for
your safety or for the function of the appli-
ance. It is imperative that these instructions
are observed.
This symbol or numbered instruction steps
lead you step for step through the operation
of the appliance.
3
Next to this symbol you receive additional
information and practical tips on using the
appliance.
2
Tips and instructions for the economical and
environmentally conscious use of the appli-
ance are marked with a clover leaf.
In the event of a malfunction, these operating instruc-
tions contain information on how to rectify faults your-
self, see the "What to do, if..." section.
If these instructions are insufficient, please contact
your nearest customer service centre.
In this respect please read the "Service" note on the
rear of these user instructions.
3
Contents
Safety Instructions ......................................................................4
Securing the door of the dishwasher .........................................................5
Disposal ..............................................................................5
Economical and Ecological Dishwashing ...................................................6
Appliance Features and Control Panel .....................................................7
Control panel ...........................................................................8
Prior to using for the first time ............................................................9
Adjusting the Water Softener ...............................................................9
Filling with Special Salt for the Water Softener . ...............................................10
Filling with Rinse Aid ....................................................................11
AdjustingRinseAidDosing.............................................................11
In Daily Use ...........................................................................12
Loading cutlery and dishes ...............................................................12
Loading Cutlery ......................................................................13
Loading Pans, Frying Pans and Large Plates ...............................................13
Loading Cups, Glasses and Coffee Services ...............................................14
Adjusting the Height of the Upper Basket . . . ...............................................15
Filling with Detergent ....................................................................16
SelectingtheWashProgramme(ProgrammeTable) ...........................................17
Settingthedishwashingprogramme ........................................................18
Changing/Interrupting the Wash Programme ...............................................18
SwitchingOfftheDishwasher .............................................................18
Care and Cleaning .....................................................................19
CleaningtheFilter ......................................................................19
CleaningthePanel......................................................................20
What to do, when ... ....................................................................21
...there are problems with the operation of the dishwasher. ......................................21
...thewashresultisunsatisfactory. .........................................................21
Technical Data ........................................................................22
Notes for Test Institutes ................................................................23
Installation and Connection Instructions ...................................................25
Installing the Dishwasher ...............................................................25
DishwashersThatCanBeIntegrated.....................................................25
Built-InDishwasher...................................................................26
Free-Standing Appliances ..............................................................26
Connecting the Dishwasher .............................................................27
Water Connection ......................................................................27
Permittedwaterpressure ..............................................................27
Connect the inlet hose ................................................................27
Waterdrain .........................................................................28
Leak Prevention System ...............................................................28
Electricalconnection ....................................................................29
Connections . ..........................................................................30
Service ...............................................................................31
4
1 Safety Instructions
The safety aspects of ELECTROLUX electrical appli-
ances comply with accepted technical standards and
the German Appliance Safety Law. Nevertheless, as
a manufacturer we consider it our obligation to make
you aware of the following safety information:
Installation, Connection and Plac-
ing into Operation
The dishwasher may only be transported upright.
Check the dishwasher for transport damage. Do
not in any circumstances connect an appliance
that is damaged. In the case of damage, please
contact your supplier.
Prior to placing the appliance in operation, ensure
that the nominal voltage and type of supply on the
rating plate match that of the supply where the
appliance is to be installed. The fuse rating is also
to be found on the rating plate.
For information on how to correctly install and
connect up your dishwasher, please read the
“Installation“ section. Multiway plugs / connectors
and extension cables must not be used. This
could constitute a safety hazard.
Child Safety
Children often do not recognise the hazards asso-
ciated with the use of electrical appliances. It is
therefore important that you ensure children are
adequately supervised and that you do not allow
children to play with the dishwasher there is a
risk that children can shut themselves inside the
appliance (risk of suffocation!).
Packaging materials (e.g. films, styrofoam) can be
dangerous for children. Risk of suffocation! Keep
packaging away from children.
Detergents can cause burns to the eyes, mouth,
and throat, or even cause choking! Please
observe the manufacturer's safety instructions for
cleaners and detergents.
The water in your dishwasher is not suitable for
drinking. If there are still remnants of detergent in
the appliance, there is a risk of burns!
When disposing of the dishwasher: unplug from
the mains, cut off and dispose of the mains cable.
Break the door lock so that the door no longer
shuts.
General Safety
Repairs to the dishwasher are only to be carried
out by qualified service engineers. Improper
repairs can give rise to significant hazards for the
user. If your appliance needs repairing, please
contact customer service or your dealer.
Never place the dishwasher in operation if the
mains cable, water inlet or drain hose is damaged;
or the control panel, work top or plinth area is
damaged such that the inside of the appliance is
freely accessible.
If the mains lead is damaged, or is to be replaced
for a longer lead, the cable (obtainable from
ELECTROLUX customer service) must be
changed by a service engineer authorised by
ELECTROLUX.
Never unplug the appliance by pulling on the
cable, always pull the plug.
Additions or modifications to the dishwasher are
not permitted for safety reasons.
Ensure that the door of the dishwasher is always
closed when it is not being loaded or unloaded. In
this way you will avoid anybody tripping over the
open door and hurting themselves.
Sharp knives and items of cutlery with sharp
edges must be placed in the cutlery tray or in the
upper rack.
Correct Use
Only wash household dishes using the dish-
washer. If the appliance is used for other pur-
poses, or is used incorrectly, the manufacturer
cannot accept any liability for any damage
caused.
Prior to use, ensure that the manufacturers of the
special salt, detergent, and rinse aid employed
specifically permit the usage of their products in
household dishwashers.
Do not put any solvents in the dishwasher. There
is a risk of an explosion!
The anti-flood system provides dependable pro-
tection against damage due to leaks. For this sys-
tem to function correctly, the following
preconditions must be met:
The appliance must remain connected to the
mains even when it is switched off.
The dishwasher must be correctly installed.
Always shut off the water supply at the tap
when the dishwasher is not to be used for
longer periods, e.g. when you are away on hol-
iday.
Do not sit or stand on the open door, the appli-
ance may tip over.
In the event of a fault, first close the tap, then
switch off the appliance and unplug it from the
mains. If the appliance is permanently wired to the
mains: switch off the fuse(s) or unscrew them.
5
Securing the door of the dishwasher
This way you can ensure that children cannot open
the door of the dishwasher:
1. There is a lever (1) on the left side of the door han-
dle. You can secure the door against being
opened unintentionally by pressing this lever to
the back using a small screwdriver or the handle
of a spoon.
2. Once the lever has been pushed back, you must
first push the door handle to the left (2) and then
push it upwards (3) in order to open the door.
3. You can remove the safety lock from the door
again by pulling the lever forwards again using a
small screwdriver or the handle of a spoon.
2 Disposal
Disposing of the Packaging Material
Dispose of the dishwasher packaging material cor-
rectly. All the packaging materials used are harmless
to the environment and can be recycled.
Plastic parts are marked with standard interna-
tional abbreviations:
>PE< for polyethylene, e.g. sheet wrapping
material
>PS< for polystyrene, e.g. padding mate-
rial (always CFC-free)
>POM< for polyoxymethylene, e.g. plastic
clips
Cardboard packaging is manufactured from recy-
cled paper and should be deposited in the waste
paper collection for recycling.
Disposal of old appliances
As and when you cease to use your dishwasher,
please take it to a recycling centre or to your dealer
who will, for a small contribution to the costs, dispose
of it for you.
6
2 Economical and Ecological Dishwash-
ing
Only connect the dishwasher to the hot water sup-
ply if your hot water is not electrically heated.
Ensure that the water softener is correctly
adjusted.
Do not pre-rinse dishes under running water.
Select the wash programme to suit the nature and
degree of the soiling on the dishes.
Do not use more detergent, special salt or rinse
aid than is recommended in these operating
instructions and by the manufacturer of the
respective product.
7
Appliance Features and Control Panel
Spray Arms
Container for Special
Salt
Rating Plate
Container
for Rinse Aid
Container for
Detergent
Filters
Rubber Seal for Con-
necting the Water
Feed to the Upper
Spray Arm
Water Hardness Switch
Top S pray Noz zle
8
Control panel
ON/OFF button
Programme buttons
Door release handle
Programme cycle indicator
Programme switch
a
ON/OFF button
Programme buttons
b
Pre Wash
c
q
Intensive 65 °C
é
Normal 65 °C
è
Normal 50 °C
ã
Eco 50 °C
Programme switch
Set the point at which the wash programme is to
start using the programme switch.
Programme cycle indicator
While the programme is running, the indicator
disc rotates to show you the respective pro-
gramme step.
b
Pre Wash
x
Main Wash
Ö
Intermediate Rinse
u
Final Rinse
z
Drying
9
Prior to using for the first time
Prior to using for the first time, remove all the clips
with which the dish racks are secured for transport.
Then perform the following steps:
1. Adjust the water softener
2. Filling with Special Salt for the Water Softener
3. Filling with Rinse Aid
Adjusting the Water Softener
To prevent the build up of scale on dishes and in the
dishwasher, the dishes must be washed with soft, i.e.
low lime content water. For this reason the dish-
washer is fitted with a water softener in which tap
water from a hardness of 4 °d (German degrees) is
softened with the aid of special salt.
3
Your local water authority can advise you on
the hardness of the water in your area.
The water softener has 4 settings.
Adjust the water softener in accordance with the table
to suit your area:
1. Open the door on the dishwasher.
2. Remove the lower rack from the dishwasher.
3. Adjust the water hardness switch with, e.g. a coin.
4. Replace the lower rack and close the door of the
dishwasher.
Water Hardness
in °d
1)
in ppm
2)
1)(°d) German degree, measure of water hardness
2)(ppm) parts per million (CaCO
3
)
*Factory setting
Turn the arrow on the water
hardness switch to number
29-50
22-28
510 - 900
390 - 500
4
3
15-21 260 - 380 2*
4-14 70 - 250 1
under 4 under 70
1
no salt necessary
10
Filling with Special Salt for the Water Softener
1
Use only special salt for dishwashers. Never
fill the salt container with any another type of
salt (e.g. culinary salt) or dishwasher deter-
gent. This would irreparably damage the
water softener.
Prior to filling with salt, please check each
time that you really do have a packet of spe-
cial salt in your hand.
Fill with special salt:
Prior to using the dishwasher for the first time
If a green mark can be seen under the lid of the
special salt container, then there is sufficient spe-
cial salt. If the green mark cannot be seen, you
must refill the container with special salt.
3
If the water hardness in your area is less
than 4 °d, you do not need to use special
salt. The green mark will then not be visible.
The function of the appliance is not impaired.
1. Open the door, remove the lower rack.
2. Undo the lid on the salt container by turning it anti-
clockwise.
3. Only when using for the first time:
fill the salt container with water.
4. Place the funnel supplied on the container open-
ing.
Fill the container with special salt through the fun-
nel; the capacity of the container is approx. 1.0-
1.5 kg depending on the grain size. Do not overfill
the salt container with special salt.
3
The water expelled by filling the salt con-
tainer with special salt runs out of the salt
container onto the base of the washing com-
partment. This is not a cause for concern,
the water will be pumped out at the start of
the next wash programme.
5. Clean any salt remnants on the container open-
ing.
6. Turn the lid clockwise to the stop, otherwise spe-
cial salt will leak into the wash water, this could
lead to poor wash results. To avoid this run a rinse
program after filling the salt container with special
salt. This will wash away salt water and any salt
crystals that have been spilt.
3
Depending on the size of the salt grains, it
can take several hours for the salt to dissolve
in the water and the green mark to become
visible again.
The setting of the water softener and thus
the consumption of salt are dependent on
the hardness of the local water.
SALE
SALT
SALZ
SEL
11
Filling with Rinse Aid
Rinse aid ensures that your dishes gleam and are
free from spots, and that you glasses are clear.
1
Use only branded rinse aid for dishwashers.
Never fill the rinse aid container with any
another substance (e.g. concentrated vine-
gar). This would damage the appliance.
Fill with rinse aid:
Prior to using the dishwasher for the first time.
When a dark point surrounded by a light ring is to
be seen in the indicator window on the container.
If there is sufficient rinse aid in the container, the
indicator window is uniformly dark.
The rinse aid compartment is on the inside of the
dishwasher door.
1. Open the door.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Fill with rinse aid exactly up to the level marked
max; this corresponds to a quantity of approx.
140 ml.
5. Close the lid and press until it locks into place.
6. Wipe up any spilt rinse aid with a cloth. Otherwise
too much foam will be formed during the wash.
Adjusting Rinse Aid Dosing
3
As the dishes are washed rinse aid is
released from the dispenser into the wash
water. The dose is factory set at 4, and can
be adjusted from 1 to 6. Only change the set-
ting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.
1. Open the door of the dishwasher.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Set the dose level.
5. Close the lid and press until it locks into place.
6. If rinse aid has run out, wipe up with a cloth.
12
In Daily Use
Is it necessary to refill with special salt or rinse
aid?
Load cutlery and dishes into the dishwasher
Fill with dishwasher detergent
Select a wash programme suitable for the cutlery
and dishes
Start the wash programme
Loading cutlery and dishes
1
Sponges, household cloths and any object
that can absorb water may not be washed in
the dishwasher
.
Before loading the dishes, you should:
Remove large left-overs.
Soften remnants of burnt food in pans.
When loading the dishes and cutlery, please note:
Dishes and cutlery must not impede the rota-
tion of the spray arms.
Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so that
water cannot collect in the container or a deep
base.
Dishes and items of cutlery must not lie inside
one another, or cover each other
To avoid damage to glasses, they must not
touch
Do not lay small objects (e.g. lids) in the cutlery
rack
For washing in the dishwasher the following cutlery/dishes
are not suitable: are of limited suitability:
Cutlery with wooden, horn,
china or mother of pearl handles
Plastic items that are not heat resistant
Older cutlery with cement that is not tempera-
ture resistant
Bonded cutlery items or dishes
Pewter or copper items
Lead crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Only wash stoneware in the dishwasher if it is spe-
cifically marked as being dishwasher-safe by the
manufacturer.
Glazed patterns may fade if machine washed fre-
quently.
Silver and aluminium parts have a tendency to dis-
colour during washing. Left-overs, e.g. egg white,
egg yolk and mustard often cause discolouring and
staining on silver. Therefore always clean left-overs
from silver immediately, if it is not to be washed
straight after use.
Some types of glass can become dull after a large
number of washes.
13
Loading Cutlery
1
Long bladed knives stored in an upright posi-
tion are a potential hazard.
1
Long and/or sharp items of cutlery such as
carving knives must be positioned horizon-
tally in the upper basket.
1
Take care when loading or unloading sharp
itemssuchasknives.
To ensure that all items of cutlery are completely
washed, you should
1. Place the grid insert on the cutlery rack
2. Place short knives, forks and spoons in the grid
insert with their handles pointing downwards.
Some models of dishwasher have cutlery baskets
without a cutlery grid.
Loading Pans, Frying Pans and
Large Plates
Load large and heavily soiled dishes in the lower
rack.
3
To make it easier to load large dishes, it is
possible
- to remove the plate inserts from the lower
rack.
- to move the cutlery basket sideways.
14
Loading Cups, Glasses and Coffee
Services
Arrange smaller, sensitive items in the lower rack and
place long, pointed items of cutlery in the knife
drawer.
Arrange plates and dishes offset on and under the
folding cup racks so that washing water can reach
all items.
The cup racks can be folded up out of the way for
tall items.
Lay or hang wine, champagne, and brandy
glasses in the cut outs on the cup racks.
Glasses, beakers, etc. can also be placed on the
two rows of prongs on the left of the upper rack.
15
Adjusting the Height of the Upper
Basket
3
The height of the basket can also be
adjusted when it is loaded.
Depending on the model, your appliance is
provided with one of the following types of
upper basket:
Lowering the Upper Basket:
1. Pull the upper basket out completely.
2. Lift and lower the upper basket using the handle at
the rear of the right hand cup basket.
Raising the Upper Basket:
1. Pull the upper basket out completely.
2. Lift the upper basket by the handle, pull gently for-
wards and allow to latch into the upper position.
Lowering the Upper Basket:
1. Pull the upper basket out completely.
2. Holding the upper basket by the handle, lift it as
far as it will go and then lower it vertically. The
upper basket will engage in the lower position.
Raising the Upper Basket:
1. Pull the upper basket out completely.
2. Holding the upper basket by the handle, lift it as
far as it will go and then lower it vertically. The
upper basket will engage in the higher position.
Maximum Height of the Dishes in the
Upper Rack Lower Rack
With upper basket raised 22 cm 31 cm
With upper basket lowered 24 cm 29 cm
Type 1
Type 2
16
Filling with Detergent
1
Only use dishwasher detergent.
Fill with detergent:
Prior to the start of a wash programme (not for the
pre wash programme). The detergent is released into
the wash water during the programme.
2
Please observe the manufacturer's dosing
and storage recommendations as stated on
the detergent packaging.
The detergent compartment is on the inside of the
dishwasher door.
1. If the lid is closed:
press release button (1).
The lid springs open.
2. Fill the detergent dispenser with detergent. The
markings indicate the dosing levels:
20corresponds to approx. 20 ml of detergent,
30corresponds to approx. 30 ml of detergent.
3. Close the lid and press until it locks into place.
3
If the dishes are very heavily soiled put addi-
tional detergent into the adjacent chamber
(2). This detergent will take effect during the
pre wash.
17
Selecting the Wash Programme (Programme Table)
Choose the most suitable wash programme with the aid of this table:
1)
The consumption figures were recorded under standard conditions. They are dependent on the loading of the
dish racks. Variations are therefore possible in practice.
Type of
Dishes:
Dinner Service and Cooking Utensils
Coffee Service
and Dessert
Dishes
All
Dish Types
In Addition:
- - with non-temperature resistant dishes -
Type of
Soiling:
heavily
soiled
driedonleft-
overs, particu-
larly egg white
and thickeners
normally
soiled
dried left-overs
normally
soiled
normally to lightly
soiled
Useddishesthat
are collected in
the dishwasher
andaretobe
washed at a
later point in
time.
particularly suited
to the use of concentrated deter-
gents.
Suitable
Programme:
òòòòò
INTENSIVE
65°C
NORMAL
65 °C
NORMAL
50 °C
ECO
50 °C
PRE WASH
Turn
Programme
Switch to:
AAABA
Press
Programme
Button:
c
q
éèãb
Programme
Sequence:
Pre Wash
Main Wash
2x Intermediate
Rinses
Final Rinse
Drying
Pre Wash
Main Wash
Intermediate
Rinse
Final Rinse
Drying
Pre Wash
Main Wash
Intermediate
Rinse
Final Rinse
Drying
-
Main Wash
Intermediate
Rinse
Final Rinse
Drying
Pre Wash
-
-
-
-
Consumption
Figures:
1)
òòòòò
Duration: 92 minutes 88 minutes 83 minutes 72 minutes 10 minutes
Energy: 1,7 kWh 1,35 kWh 1,24 kWh 1,2 kWh < 0.1 kWh
Water: 22 litres 19 litres 19 litres 14 litres 6 litres
18
Setting the dishwashing programme
1. Check that the dishes and cutlery are loaded into
the dishwasher in such a manner that the spray
arms are free to rotate.
2. Open the tap fully.
3. Close dishwasher door.
4. Turn the programme switch clockwise to A or B
(see Programme Table).
1
For interference suppression reasons, only
operate the programme switch with the dish-
washer switched off. It is also possible that
the automated addition of detergent will be
triggered.
5. Press the button for the programme required
(see Programme Table).
6.
Press ON/OFF button a. Power indicator
light illuminates. The selected wash pro-
gramme starts.
The programme switch rotates during the
wash programme and indicates the position
that has been reached in the programme.
1
If a wash programme has been started even
though the tap was closed, switch off the
dishwasher with the ON/OFF button
a,
open the tap and start the wash programme
again.
Changing/Interrupting the Wash
Programme
3
Only change or interrupt a wash programme
in progress if it is absolutely necessary.
When the appliance is closed again, the air
that has entered is heated rapidly and
expands. This can cause water to escape
onto the floor and possibly trigger the anti-
flood system.
Changing the wash programme
1. Press ON/OFF button a. Power indicator light
goes out, wash programme stops.
1
Hot steam can escape when the door is
opened. There is a risk of scolding! Open the
door carefully.
2. Open dishwasher door and check whether there is
still detergent in the container. Refill the container
if necessary.
3. Close dishwasher door.
4. Turn the programme switch clockwise to A or B
(see Programme Table).
5. Press the button for the programme required
(see Programme Table).
6. Press ON/OFF button
a.ON/OFFbuttona
indicator illuminates. The selected wash pro-
gramme starts.
Interrupting the wash programme by
opening the door of the dishwasher
1
Hot steam can escape when the door is
opened. There is a risk of scolding! Open the
door carefully.
1. Open the door of the dishwasher. The wash pro-
gramme stops.
2. Shut the door. The wash programme continues.
Switching Off the Dish-
washer
When the wash programme is finished:
1. Press the ON/OFF button
a . Power indicator
light goes out.
1
Hot steam may escape if the door is opened
immediately after the end of the programme.
Therefore:
2. Open the door carefully.
Emptying the Dishwasher
3
Hot dishes are sensitive to knocks. The dishes
should therefore be allowed to cool down before
removing them from the appliance.
Leave the dishes in the dishwasher for approx. 15
minutes after the end of the programme so that
they dry better and can cool down.
Empty the lower rack first, then the upper rack. In
this way you will avoid any water left on the upper
rack dripping onto the dishes in the lower rack and
causing water spots.
1
Please note, that if your dishwasher is
installed under a kitchen worktop, escaping
steam may damage the worktop. Its under-
side must be protectad against rising steam
with aluminium foil as prescribed.
19
Care and Cleaning
1
Do not under any circumstances use furni-
ture care products or aggressive cleaners.
If necessary, clean the controls only with a soft
cloth and pure warm water.
The spray arms do not need cleaning.
Occasionally check the internal containers, door
seal, and water inlet for soiling, clean if necessary.
Cleaning the Filter
3
Thefiltersinthebaseofthewashingcom-
partment are to a large extent self-cleaning.
Nevertheless the filters should be checked
and cleaned from time to time. Dirty filters
will degrade the washing result.
1. Open the door, remove the lower rack.
2. The dishwasher filter system comprises a coarse/
fine filter, microfilter and a flat filter. Unlock the fil-
ter system using the handle on the microfilter, and
remove.
3. Turn the handle about ¼ a turn anticlockwise and
remove.
4. Take hold of the coarse/fine filter (1) by the handle
with the hole and remove from the microfilter (2).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (3) from the base of the
washing compartment and clean both faces thor-
oughly.
7. Put the flat filter back in the base of the washing
compartment.
8. Place the coarse/fine filter in the microfilter and
press together.
9. Put the filter combination in place and lock by
turning the handle clockwise to the stop. During
this process ensure that the flat filter does not pro-
trude .above the base of the washing compart-
ment.
1
Under no circumstances may the dishwasher
be used without filters.
20
Cleaning the Panel
To be able to clean the control panel of the dish-
washer, it is possible to remove the Plexiglas cover
from the control panel.
Remove the Plexiglas Cover
1
Pull the mains plug of the dishwasher out of
the socket.
1. Close dishwasher door.
2. In the case of dishwashers with program switches,
set these switches to the horizontal position (only
turn them clockwise!).
3. There is a small recess in the bottom centre of the
Plexiglas cover. Insert a screwdriver into this
recess and carefully lift the Plexiglas cover
until
the hooks on both sides of the Plexiglas cover
spring out of the eyes of the control panel
.
1
Caution: When doing this, do not scratch the
control panel with the screwdriver.
4. Swivel the Plexiglas cover up and remove it.
5. Clean the control panel and the Plexiglas cover
with a cloth and hand detergent. Never use strong
cleaning agents.
Insert the Plexiglas Cover
1
The Plexiglas cover and the control panel
must be dry. The program switch must be
horizontal in the case of units with a program
switch.
1. With the door closed, press the Plexiglas cover up
into the joint of the control panel.
2. Slightly bend the Plexiglas cover so that the two
hooks of the Plexiglas cover fit into the eyes of the
control panel. It is best to begin with the left hook.
3. After pressing again in the upper part, check that
the Plexiglas cover is correctly fitted.
4. Turn the program switch clockwise into the zero
position in the case of units with a program switch.
5. Plug the mains plug back into the socket.
I
I
I
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Electrolux ESF656W Manuale utente

Categoria
Lavastoviglie
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue