DAB Nova Instruction For Installation And Maintenance

Categoria
Potenza pistole termiche
Tipo
Instruction For Installation And Maintenance
ISTRUZIONI PER L'INSTALLAZIONE E LA MANUTENZIONE
INSTRUCTIONS DE MISE EN SERVICE ET D'ENTRETIEN
INSTRUCTIONS FOR INSTALLATION AND MAINTENANCE
INSTALLATIONSANWEISUNG UND WARTUNG
INSTRUCTIES VOOR INGEBRUIKNAME EN ONDERHOUD
INSTRUCCIONES PARA LA INSTALACION Y EL MANTENIMIENTO
INSTALLATIONS - OCH UNDERHÅLLSANVISNING
ИНСТРУКЦИИ ПО МОНТАЖУ И ТЕХНИЧЕСКОМУ ОБСЛУЖИВАНИЮ
INSTRUCTIUNI DE INSTALARE SI INTRETINERE
NÁVOD NA INSTALACI A OBSLUHU
NOVA BOX
NOVA BOX
(IT) DICHIARAZIONE DI CONFORMITÀ CE
Noi, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, dichiariamo sotto la nostra esclusiva responsabilità
che i prodotti ai quali questa dichiarazione si riferisce sono
conformi alle seguenti direttive:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
ed alle seguenti norme:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(FR) DÉCLARATION DE CONFORMITÉ CE
Nous, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino
(PD) – Italy, déclarons sous notre responsabilité exclusive
que les produits auxquels cette déclaration se réfère sont
conformes aux directives suivantes:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
ainsi qu’aux normes suivantes :
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(GB) DECLARATION OF CONFORMITY CE
We, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, declare under our responsibility that the products to
which this declaration refers are in conformity with the
following directives:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
and with the following standards:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(DE) EG-KONFORMITÄTSERKLÄRUNG
Wir, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, erklären unter unserer ausschließlichen
Verantwortlichkeit, dass die Produkte auf die sich diese
Erklärung bezieht, den folgenden Richtlinien:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
sowie den folgenden Normen entsprechen:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(NL) EG-VERKLARING VAN OVEREENSTEMMING
Wij, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, verklaren uitsluitend voor eigen verantwoordelijkheid
dat de producten waarop deze verklaring betrekking heeft,
conform de volgende richtlijnen zijn:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
en conform de volgende normen:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(ES) DECLARACIÓN DE CONFORMIDAD CE
Nosotros, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino
(PD) – Italy, declaramos bajo nuestra exclusiva
responsabilidad que los productos a los que se refiere esta
declaración son conformes con las directivas siguientes:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
y con las normas siguientes:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(SE) EG-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
Vi, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD) –
Italy, försäkrar under eget ansvar att produkterna som denna
försäkran avser är i överensstämmelse med följande direktiv:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
och följande standarder:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(RU) ЗАЯВЛЕНИЕ О СООТВЕТСТВИИ СЕ
Мы, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, заявляем под полную нашу ответственность, что
изделия к которым относится данное заявление,
отвечают требованиям следующих директив:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
и следующих нормативов:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(RO) DECLARAŢIE DE CONFORMITATE CE
Noi, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy, declarăm sub exclusiva noastră responsabilitate că
produsele la care se referă această declaraţie sunt conforme cu
următoarele directive:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility
Directive)
2011/65/EU (Restriction of the use of certain
hazardous substances in electrical and electronic
equipment)
şi cu următoarele norme:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Lifting plants for wastewater
containing faecal matter)
(CZ) PROHLÁŠENÍ O SHODĚ CE
My, DAB Pumps S.p.A. - Via M.Polo, 14 – Mestrino (PD)
– Italy,prohlašujeme na svou zodpovědnost, že výrobky, na
které toho prohlášení platí, jsou ve shodě s následujícími
směrnicemi:
2006/95/CE (Low Voltage Directive)
2004/108/CE (Electromagnetic Compatibility Directive)
2011/65/EU (Restriction of the use of certain hazardous
substances in electrical and electronic equipment)
A s následujícími normami:
EN 60335-1 : 10 (Household and Similar Electrical
Appliances – Safety)
EN 60335-2-41 : 10 (Particular Requirements for
Pumps)
EN 12050-1 : 03 (Liftin plants for wastewater
containing faecal matter)
Mestrino (PD), 01/01/2013
IT
Ultime due cifre dell'anno di apposizione della marcatura: 13
FR
Deux derniers chiffres de l’année d’apposition du marquage : 13
GB
Last two figures of the year in which the mark was applied: 13
DE
Die letzten beiden Zahlen des Jahrs der Kennzeichnung: 13
NL
Laatste twee cijfers van het jaar voor het aanbrengen van de markering: 13
ES
Últimas dos cifras del año puestas en aposición en el marcado: 13
SE
De två sista siffrorna i det årtal då märkningen har anbringats: 13
RU
Последние две цифры года в маркировке: 13
RO
Ultimele două cifre ale anului de aplicare a marcajului: 13
CZ
Poslední dvě číslice určující rok v označení: 13
Francesco Sinico
Technical Director
ITALIANO pag 01
FRANÇAIS page 05
ENGLISH page 09
DEUTSCH seite 13
NEDERLANDS bladz 17
ESPAÑOL pág 21
SVENSKA sid 25
РУССКИЙ стр. 29
ROMANA pag. 33
ČESKY strana 37
ITALIANO
1
INDICE pag.
1.
AVVERTENZE 1
2.
RESPONSABILITÀ 1
3.
DIMENSIONI E PESI 1
4.
MODALITÀ DI IMPIEGO 1
5.
INSTALLAZIONE 1
6.
IMPORTANTE 2
7.
MANUTENZIONE 3
8.
RICERCA INCONVENIENTI 3
SCHEMA DI MONTAGGIO : KIT GALLEGGIANTE DOCCIA 41
ESEMPIO DI INSTALLAZIONE 42
1. AVVERTENZE
1.1
Prima di procedere all’installazione leggere attentamente questa documentazione e quella
contenuta nel manuale della pompa.
E’ indispensabile che i collegamenti elettrici e idraulici vengano realizzati da personale qualificato
ed in possesso dei requisiti tecnici indicati dalle norme di sicurezza riguardanti la progettazione,
l’installazione e la manutenzione degli impianti tecnici del paese di installazione del prodotto.
Il mancato rispetto delle norme di sicurezza, oltre a creare pericolo per l’incolumità delle persone
e danneggiare le apparecchiature, farà decadere ogni diritto di intervento in garanzia
.
1.2
Per personale qualificato si intendono quelle persone che per la loro formazione, esperienza ed
istruzione, nonché le conoscenze delle relative norme, prescrizioni provvedimenti per la
prevenzione degli incidenti e sulle condizioni di servizio, sono stati autorizzati dal responsabile
della sicurezza dell’impianto ad eseguire qualsiasi necessaria attività ed in questa essere in grado
di conoscere ed evitare qualsiasi pericolo. (Definizione per il personale tecnico IEC 364).
L’apparecchio non è destinato ad essere usato da persone (bambini compresi) le cui capaci
fisiche sensoriali e mentali siano ridotte, oppure con mancanza di esperienza o di conoscenza, a
meno che esse abbiano potuto beneficiare, attraverso l’intermediazione di una persona
responsabile della loro sicurezza, di una sorveglianza o di istruzioni riguardanti l’uso
dell’apparecchio. I bambini devono essere sorvegliati per sincerarsi che non giochino con
l’apparecchio.
1.3
Verificare che l’impianto non abbia subito danni dovuti al trasporto o al magazzinaggio. In
particolare occorre controllare che l’involucro esterno sia perfettamente integro ed in ottime
condizioni ; verificare l’efficienza di tutti i componenti della vasca, se necessario, sostituire le
parti che non risultassero in perfetta efficienza.
2. RESPONSABILITÀ
Il costruttore non risponde del mal funzionamento dell’impianto qualora questo venga manomesso o modificato o
fatto funzionare oltre i dati di targa.
Declina inoltre ogni responsabilità per le possibili inesattezze contenute nel presente opuscolo, se dovute ad errori
di stampa o di trascrizione. Si riserva il diritto di apportare ai prodotti quelle modifiche che riterrà necessarie od
utili, senza pregiudicarne le caratteristiche essenziali.
3. DIMENSIONI E PESI
La targhetta adesiva posta sull’imballo riporta l’indicazione del peso totale dell’impianto. Le dimensioni di
ingombro sono riportate a pag. 3
4. MODALITÁ DI IMPIEGO
NOVA BOX è un sistema premontato, pronto alla posa, senza bisogno di regolazioni, ideale per la raccolta e lo
smaltimento di scarichi domestici da locali seminterrati, situati sotto il livello della rete fognaria.
NON è idonea per il convogliamento di acque nere di rifiuto e liquidi corrosivi.
Temperatura max del liquido: 50 °C continui – fino a 90 °C per massimo 3 minuti.
In ottemperanza alle vigenti norme antinfortunistiche, le NOVA BOX non possono essere impiegate per il
convogliamento di liquidi infiammabili o esplosivi, quali benzina, gasolio, oli combustibili, solventi, ecc.
5. INSTALLAZIONE
5.1
Le NOVA BOX sono fornite con pompe NOVA 300.
5.2
Per riferimenti dei particolari riguardanti il montaggio vedere schema di montaggio pag. 4
ENGLISH
9
CONTENTS Page
1.
WARNINGS 9
2.
RESPONSIBILITY 9
3.
DIMENSIONS AND WEIGHTS 9
4.
METHOD OF USE 9
5.
INSTALLATION 9
6.
IMPORTANT 10
7.
MAINTENANCE 11
8.
TROUBLESHOOTING 11
ASSEMBLY DIAGRAM : SHOWER FLOAT KIT 41
EXAMPLE OF INSTALLATION 42
1. WARNINGS
1.1
Read this documentation and the documentation supplied in the pump manual carefully
before installation.
It is indispensable to have the electrical and hydraulic connections made by skilled personnel
in possession of the technical requirements indicated by the safety regulations in force in the
country in which the product is installed.
Failure to comply with the safety regulations not only causes risk to personal safety and
damage to the equipment, but invalidates every right to assistance under guarantee.
1.2
The term skilled personnel means persons whose training, experience and instruction, as well
as their knowledge of the respective standards and requirements for accident prevention and
working conditions, have been approved by the person in charge of plant safety, authorizing
them to perform all the necessary activities, during which they are able to recognize and
avoid all dangers. (Definition for technical personnel IEC 364).
The appliance is not intendend for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsable for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
1.3
Check that no damage has been done during transport or storage. In particular, ensure that
the external casing is perfectly entire and in excellent condition; check the efficiency of all
the tank components and, if necessary, replace any parts that are not in perfect working order.
2. RESPONSIBILITY
The Manufacturer does not ensure good operation of the circulator if it is tampered with or modified or made
to operate at values beyond the data on the plate.
The Manufacturer also declines all responsibility for possible errors in this booklet, if due to misprints or
errors in copying. The company reserves the right to make any modifications to products that it may
consider necessary or useful, without affecting the essential characteristics.
3. DIMENSIONS AND WEIGHTS
The adhesive label on the package indicates the total weight of the system. The dimensions are given on
page 11
4. METHOD OF USE
NOVA BOX is a pre-assembled system, ready for installation, without any need of regulation, ideal for
collecting and disposing of domestic waste from basement premises, located below the level of the sewage
network.
It is NOT suitable for conveying waste sewage and corrosive liquids.
Max. liquid temperature: 50°C continuous - up to 90°C for maximum 3 minutes.
In accordance with the accident-prevention regulations in force, the NOVA BOX may not be used for
conveying inflammable or explosive liquids, such as petrol, diesel fuel, fuel oil, solvents, etc.
5. INSTALLATION
5.1
The NOVA BOX is supplied with a NOVA 300 pump that is not connected to the tank couplings.
5.2
For the part references concerning assembly, see the assembly diagram on page 12
ENGLISH
10
5.3
Instructions for assembly:
Remove the tank cover, releasing the 6 clips(229). The maximum level reached in the tank with the
standard float is 285 mm from the tank bottom. If it is necessary to maintain a lower maximum level,
the standard float must be replaced with the float type B (standard supply) (fig. page 12 ). With this
float it is possible to limit the maximum level of water in the tank to 110 mm. A typical application is
for a shower drain. To change the float, slacken the screw (26) and extract the standard float from the
horizontal pin onto which it is keyed, fit the float type B, performing the same operations in inverse
order, and secure it with the same screw..
Insert the pump between the two anchoring points on the bottom of the tank and make the following
hydraulic connections:
INPUT: (for the input references, see the example of installation on page 41)
2 on sides A and B: to use these inputs a hole must be made in the box on the marks and the
adapters (119) must be fitted for PVC pipes with external diam. = 40 mm, or internal diam. = 50
mm, to be glued on with adhesive type “TANGIT” (HENKEL). The gaskets (64a) must be
applied on the outside of the tank.
1 on side C: to use this inputs a hole must be made in the box on the mark and the ¾” hosetail
(119a) must be fitted for rubber pipes with external diam. = 25 mm. The gasket (64b) must be
applied on the outside of the tank. It is recommended to secure the pipe to the sleeve with two
hose-clamps. When used for a washing machine drain, install a siphon (not supplied) between the
machine and the collecting tank, so as to avoid the overflow of liquid when it is not in use.
1 on the cover D: for pipes with external diam = 30 or 40 mm. To use this input, make a hole in
the cover in the place provided, without damaging the seat of the rubber sleeve. Use one of the
clamps (84) or (84a) supplied in the accessories kit to ensure the seal between the input pipe and
the cover.
DELIVERY:
Fit the no return valve (137) supplied in the accessories kit, screwing it onto the output mouth, after
fitting the sealing gasket (64a) between the tank and the valve. Tighten it to ensure the seal of the
gasket. Directly connect the delivery pipe with internal thread 1¼” or fit the connecting union (161)
to use a rubber delivery pipe with internal diam. = 32 mm, to be secured with a hose-clamp.
Before replacing the cover on the tank, test the connection with clean water, after having connected
the pump to the mains.
VENTILATION:
The ventilation duct E may be made using a PVC pipe with external diam = 30 or 40 mm, to be
connected to the cover of the tank with a rubber clamp (84) or (84a) supplied as standard in the
accessories kit. Avoid horizontal stretches. If it is not possible to make a pipe, the seat for pipe
connection may be fitted with a valve with filter. To fit the valve, refer to the diagram on page 12 and
insert all its components in the valve housing, proceeding in this order: float ball (49), seal ring (16a),
safety valve support disc (180), O-Ring (95), rubber clamp diam. 490 mm (84a), breather cap (26).
6. IMPORTANT
6.1
Install the tank in a position protected against frost.
6.2
The tank may stand on the floor or be placed in a masonry pit. In any case the surface on
which it rests must be perfectly horizontal and the whole of the bottom of the tank must rest
on the surface..
6.3
Ensure that the difference in level between the pump and the sewage mains is compatible
with the pump performance.
6.4
The tank should be ventilated in any case.
ENGLISH
11
7. MAINTENANCE
7.1
After starting up the plant, it is advisable to inspect and clean it, especially the no return valve, about
every three months. This interval may be increased after the first inspections have given a favourable
outcome.
7.2
Clean the pump accurately, removing any foreign bodies stuck in the intake grille and check that the
float moves freely. If necessary, remove the pump from the tank.
7.3
To take out the pump, release it from the delivery duct, unscrewing the two ring nuts of the elbow
connections (161a).
7.4
It is recommended to clean the system at least once a year with running water, operating the pump
repeatedly.
7.5
To guarantee good operation of the breather filter (42), it must be cleaned at least every six months
with soap and water.
8. TROUBLESHOOTING
FAULT CHECK (POSSIBLE CAUSES) REMEDY
1. Water is
overflowing from
the tank and the
pump is not
working.
A. Delivery pipe blocked.
B. No return valve blocked.
C. Pump characteristics are insufficient.
D. The pump intake grille is blocked.
A. Remove the obstructions.
B. Clean the valve.
D. Remove the obstructions.
DIMENSIONS
ENGLISH
12
ASSEMBLY DIAGRAM
FLOAT TYPE B “SHOWER”
139. PUMP 87. SCREW CLAMP Ø 44
BREATHER GROUP / SAFETY VALVE
100. TANK 137. CHECK VALVE 1¼” 49. FLOAT BALL
14. COVER 157. COLLAR 1¼” 16a. SEAL RING Ø 15 mm
109. GASKET 119a. STRAIGHT HOSETAIL ¾” × 25 180. VALVE SUPPORT DISC
229. CLOSING CLIP 161. STRAIGHT HOSETAIL 1¼” × 32 95. O-RING 3143 36.14 × 2.62
118. NIPPLE 1 ¼” 88. RUBBER CABLE CLAMP 26. BREATHER CAP
161a. CURVED HOSETAIL 1¼” × 32 119. ADAPTER 50 × 40 × 1 ¼” 84a. TUBE CLAMP Ø 40 mm
64a. GASKET Ø 1¼” 157a. COLLAR ¾” 42. FILTER PLUG NUT
64b. GASKET Ø ¾” 84. TUBE CLAMP Ø 30 mm
161b. NIT. RUBBER HOSE 32 83. SHOWER FLOAT KIT
BRETHER GROUP / SAFETY VALVE
41
SCHEMA MONTAGGIO: KIT GALLEGGIANTE DOCCIA-SCHÉMA DE MONTAGE: KIT FLOTTEUR DOUCHE
ASSEMBLY DIAGRAM: SHOWER FLOAT KIT-MONTAGESCHEMA: KIT SCHWIMMER DUSCHE
MONTAGESCHEMA: SET VLOTTER DOUCHE-ESQUEMA DE MONTAJE: KIT FLOTADOR DUCHA
MONTERINGSSCHEMA: FLOTTÖRSATS DUSCH -МОНТАЖНАЯ СХЕМА: КОМПЛЕКТ ПОПЛАВКА ДЛЯ ДУША
SCHEMA DE MONTAJ: KIT PLUTITOR DE DUS - SCHÉMA ZAPOJENÍ: KIT SHOWER FLOAT
1 2
3 4
42
ESEMPIO DI INSTALLAZIONE / EXEMPLE D'INSTALLATION / EXAMPLE OF INSTALLATION
INSTALLATIONSBEISPIEL / INSTALLATIEVOORBEELD / EJEMPLO DE INSTALACION / INSTALLATIONSEXEMPEL
ПРИМЕР МОНТАЖА / EXEMPLU DE INSTALARE / PŘÍKLAD INSTALACE
MIN
130
D
E
A
B
C
43
DAB PUMPS LTD.
Units 4 & 5, Stortford Hall Industrial Park,
Dunmow Road, Bishop’s Stortford, Herts
CM23 5GZ - UK
Tel.: +44 1279 652 776
Fax: +44 1279 657 727
DAB PUMPEN DEUTSCHLAND GmbH
Tackweg 11
D - 47918 Tönisvorst - Germany
Tel.: +49 2151 82136-0
Fax: +49 2151 82136-36
DAB UKRAINE Representative Office
Regus Horizon Park
4M. Hrinchenka St, suit 116
03680 Kiev. UKRAINE
Tel. +38 044 391 59 43
DAB PRODUCTION HUNGARY KFT.
H-8800
NAGYKANIZSA, Buda Ernó u.5
HUNGARY
Tel. +36.93501700
DAB PUMPS B.V.
Albert Einsteinweg, 4
5151 DL Drunen - Nederland
Tel.: +31 416 387280
Fax: +31 416 387299
DAB PUMPS B.V.
Brusselstraat 150
B-1702 Groot-Bijgaarden - Belgium
Tel.: +32 2 4668353
Fax: +32 2 4669218
DAB PUMPS IBERICA S.L.
Avenida de Castilla nr.1 Local 14
28830 - San Fernando De Henares - Madrid
Spain
Ph.: +34 91 6569545
Fax: +34 91 6569676
PUMPS AMERICA, INC. DAB PUMPS DIVISION
3226 Benchmark Drive
Ladson, SC 29456 USA
Ph. : 1-843-824-6332
Toll Free : 1-866-896-4DAB (4322)
Fax : 1-843-797-3366
OOO DWT GROUP
100 bldg. 3 Dmitrovskoe highway,
127247 Moscow - Russia
Tel.: +7 495 739 52 50
Fax: +7 495 485-3618
DAB PUMPS CHINA
No.40 Kaituo Road, Qingdao Economic &
Technological Development Zone
Qingdao City, Shandong Province, China
PC: 266500
Tel.: +8653286812030-6270
Fax: +8653286812210
DAB PUMPS S.p.A.
Via M. Polo, 14 - 35035 Mestrino (PD) - Italy
Tel. +39 049 5125000 - Fax +39 049 5125950
www.dabpumps.com
DWT South Africa
Podium at Menlyn, 3rd Floor, Unit 3001b,
43 Ingersol Road, C/O Lois and Atterbury,
Menlyn, Pretoria, 0181 South-Africa
Tel +27 12 361 3997
Fax +27 12 361 3137
DAB POLAND - Representative Office
Mokotow Marynarska
Ul. Postepu 15c - 3rd Floor
02-676 Warsaw - POLAND
Tel. +48 223 81 6085
02/14 cod.0013.600.31
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

DAB Nova Instruction For Installation And Maintenance

Categoria
Potenza pistole termiche
Tipo
Instruction For Installation And Maintenance

in altre lingue