Hitachi DZ-GX5100SW Manuale utente

EnglishPyccкий

DVD-RAM DVD-RW

DVD-R +RW

Instruction manual

Инструкция по эксплуатации

Если Вы хотите получить надежные

результаты при воспроизведении и работать

видеокамерой в следующие годы без

возникновения каких-либо проблем, прежде

всего прочтите полностью эту инструкцию по

эксплуатации.

DVDCAM PC Software Support Centre

URL http://dvdcam-pc.support.hitachi.ca/

Support Center phone numbers for software provided:

Телефон центра программного обслуживания для прилагаемого программного обеспечения:

PIXELA CORPORATION

+63-2-438-0090 URL: http://www.pixela.co.jp/oem/hitachi/e/index.html

DZ-GX5100SW/DZ-GX5060SW

DZ-GX5100SW DZ-GX5060SW

To obtain the best performance and ensure years of

trouble-free use, please read this entire instruction

manual.

English

2

Important Information

For Your Safety

The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the

camera/recorder is to be left unattended for a long period of time, turn it off.

The DVD video camera/recorder and AC

adapter/charger have the following caution

marks.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Identifications of caution marks

Precautions

WARNING: Many television programmes and

films are copyrighted. In certain circumstances,

copy-right law may apply to private in-home

videotaping of copyrighted materials.

WARNING: To prevent risk of injury or damage

to your DVD video camera/recorder and the AC

adapter/charger, use only the DZ-BP07PW/DZ-

BP14SW/DZ-BP7SW battery and DZ-ACS3

(SW) AC adapter/charger.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol warns the user that

uninsulated voltage within the unit

may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous

to make any kind of contact with any

inside part of this unit.

This symbol alerts the user that

important literature concerning the

operation and maintenance of this unit

has been included. Therefore, it should

be read carefully to avoid any

problems.

The liquid crystal display (LCD) panel is

made by highly precise technology. More than

99.99% of its picture elements (pixels) are

effective, but some (less than 0.01%) may

appear as coloured bright dots. This does not

indicate a fault as the LCD panel stretches the

limits of current technology.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain

access to the inside of the product. Refer all

servicing to qualified personnel.

English

3

IMPORTANT SAFETY INSTRUCTIONS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a

major factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/

recorder and accessory equipment.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Protect the mains lead from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

10 Only use attachments/accessories specified by the

manufacturer.

11 Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

12 Unplug this apparatus during lightning storms or

when unused for long periods of time.

13 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as mains lead or plug is

damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

14 The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

15 The equipment (AC Adapter/Charger) shall be

used near the socket-outlet and shall be easily

accessible.

English

4

Cautions When Using

Handle the liquid crystal display (LCD) with care:

• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with

a sharp object.

• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear

soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.

• Do not place the DVD video camera/recorder with the open LCD screen down.

• Close the LCD monitor when not using the DVD video camera/recorder.

Liquid crystal display (LCD) and viewfinder:

• The LCD screen and viewfinder are the products of highly precise technology. Among the total

number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels

for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured dots

(red, blue, green). This shows the limitations of the current technology, and does not indicate a

fault that will interfere with recording.

• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/

recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal

brightness will be restored when the temperature inside the DVD video camera/recorder rises.

Hold the DVD video camera/recorder correctly:

• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The

viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.

Do not subject the DVD video camera/recorder to impact:

• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it

against a hard object or let it fall.

• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD

video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.

No sand or dust!

• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause

malfunctions or defects.

No water or oil!

• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric

shock, malfunctions or defects.

Heat on surface of product:

• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly

warm, but this does not indicate a fault.

Screen on connected TV:

• Never leave the disc navigation screen, still image or camera image displayed on your TV to which

the DVD video camera/recorder is connected: Doing so could result in displayed image retention

or phosphor degradation of TV screen.

Be careful of ambient temperature:

• Using the DVD video camera/recorder in a place where the temperature is over 40ºC or under 0ºC

will result in abnormal recording/playback.

• Take care that the temperature of this DVD video camera/recorder, when connected to PC does

not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).

• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the

temperature is very high for a long time: This could cause malfunctions.

English

5

Do not point directly at the sun:

• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction

or a fire could occur.

• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This

could cause malfunctions.

Do not use the DVD video camera/recorder near TV or radio:

• This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD video camera/recorder near strong radio waves or magnetism:

• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a

radio wave tower or electric appliances, noise could enter video and audio that are being recorded.

During playback of normally recorded video and audio, noise may also be present in picture and

sound.

At worst the DVD video camera/recorder could malfunction.

Do not expose the DVD video camera/recorder to soot or steam:

• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.

Do not use the DVD video camera/recorder near corrosive gas:

• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated

by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring

area, the external or internal terminals could corrode, which would disable normal operation, or

the battery connecting terminals could corrode, so power will not turn on.

Do not use the DVD video camera/recorder near ultrasonic humidifier:

• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the

air, and white particles could adhere to the optical head of the DVD video camera/recorder, which

could cause it to operate abnormally.

Do not expose the DVD video camera/recorder to insecticide:

• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,

and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD

video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.

Do not use a generally available 8 cm CD lens cleaner:

• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.

• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.

• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.

Be careful of moisture condensation:

• When you move the DVD video camera/recorder between places where the difference in

temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or

vehicle – condensation (vapour in air warmed or cooled to water droplets) could occur on the lens

and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of

disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,

dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may

remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2

hours before using it again.

Do not use the DVD video camera/recorder for a long uninterrupted period of time:

• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance

camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video

camera/recorder could exceed the limit and the recording/playback operation may slow down or

other faults could occur. If this happens, turn it off and wait for a while before using it again.

English

6

Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or

CARD ACCESS indicator is lit or blinking:

• The ACCESS/PC or CARD ACCESS indicator is lit or

blinking to show that data is being written to disc or card,

or being read from it. At this time, do not do any of the

following, so as not to damage the data:

− Remove battery

− Disconnect AC adapter/charger

− Plug or unplug PC connection cable

− Remove disc or card

− Subject DVD video camera/recorder to severe

vibrations or impact

− Violently open or close the LCD monitor

The ACCESS/PC indicator will light for a while after

recording is finished. While it is lit, do not subject the DVD

video camera/recorder to any vibration or impact, and do

not disconnect the battery or AC adapter/charger.

If you turn the DVD video camera/recorder off while the

ACCESS/PC or CARD ACCESS indicator is lit or blinking,

turn it on again with the disc or card loaded in it: Repair of

the disc or card will be executed automatically (see page 131).

Do not wipe the DVD video camera/recorder case with benzene or thinner:

• The coating of case could peel off or the case surface could deteriorate.

• When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

The battery provided has not been charged at time of purchase:

• Charge it before using the DVD video camera/recorder (see page 26).

• The battery will discharge as time passes. (The battery is produced so that it discharges on its own

in order to protect its characteristics.)

Disc cannot be inserted or removed unless a charged battery or AC adapter/

charger is connected to the DVD video camera/recorder.

Be sure to set the power switch to “OFF” when turning the DVD video camera/

recorder off:

• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being

powered could cause a fault.

CARD ACCESS indicator

ACCESS/PC

indicator

English

7

Cautions When Storing

Do not leave the DVD video camera/recorder in a place where the temperature is

very high for a long period of time:

• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave

the DVD video camera/recorder in such a place, it could malfunction or the case could be

damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a

heater.

Do not store the DVD video camera/recorder in a place where the humidity is high

or in a dusty place:

• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,

the lens could be mouldy, and the DVD video camera/recorder could become inoperable. It is

recommended that you put the DVD video camera/recorder with desiccant in a box when storing

it in a closet, etc.

Do not store the DVD video camera/recorder in a place subject to strong

magnetism or intense vibrations:

• This could cause malfunctions.

Detach the battery from the DVD video camera/recorder and store it in a cool place:

• Leaving the battery attached or storing it at high temperature could shorten its life.

Suggestions and Restrictions

Make a trial recording:

• Always make a trial recording before doing actual recording to make sure that recording is normal.

The data that have not been stored normally because of a defect in the DVD video camera/

recorder cannot be restored.

It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for

trial recording.

Do not use the DVD video camera/recorder for professional applications:

• This DVD video camera/recorder is designed and produced for home-use recording and playback.

The recorded contents cannot be compensated for:

• Hitachi cannot compensate for any damages caused when recording is not made normally or

recorded contents cannot be played back because of a defect in the DVD video camera/recorder,

disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.

• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card,

etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due

to loss of recorded contents.

Copyright:

• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog

media or devices are protected by the copyright act and cannot be used without permission of the

owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some

demonstrations, performances and exhibitions, even for personal enjoyment.

English

8

CLEANING

Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.

●Cleaning LCD screen and camera

lens

Use dry, soft cloth to wipe dirt off. When

cleaning the LCD screen, be careful not to use

force, scratch it, or subject it to impact: Doing

such could cause a defect in the screen, result in

display unevenness, or damage the LCD

monitor.

●If dust adheres to the viewfinder

lens, remove it using a cotton

swab, etc.

Do not rub the lens with force: Doing so could

scratch the lens.

●Do not use benzene or thinner to

clean DVD video camera/recorder

case

The coating of case could peel off or the case

could deteriorate. Wipe off dirt on the case with

a moist cloth which has been completely wrung

out. When using chemical cleaning cloth, follow

instructions for use.

HANDLING DISCS

●Using discs

Discs are very delicate recording media.

Carefully read the following cautions and

observe them:

• Always use a brand new disc when recording

important material.

• Be sure not to touch the recording surface of

disc, or dirty or scratch it.

• If there is dust, scratch, dirt on disc or if it is

warped, the following phenomena may occur:

− Block noise in playback

image

− Momentary stop of

playback image

− Sound interrupted during

playback, or abnormal

sound

− Blue thumbnail

display* (Fig. 1)

− Disc cannot correctly

be recognised

− Disc cannot be

initialised

− Delay between video

and audio

Even if disc is normal, the above phenomena

may occasionally occur. While the ACCESS/

PC indicator is lit, do not subject disc to

vibrations or impact, and avoid using DVD

video camera/recorder at extremely high or

low temperatures, or in environment where

condensation is likely to occur.

• When recording images,

the DVD video camera/

recorder may avoid the

portions of disc where

recording is not possible,

due to dust, scratches,

etc. [It will pause 9 at

such a portion and

automatically restart

recording (:).]

This will cause recording to be interrupted for

several seconds to several minutes, and

multiple thumbnails will be created by one

recording session as shown above. In this case,

the recordable time on disc will decrease.

• Be careful when removing the disc since the

metal of removal slot of DVD video camera/

recorder, and disc itself, may be hot.

●Storing discs

• When storing disc, replace it in the plastic case

in which it was purchased.

• Be careful that no condensation occurs on disc.

• Do not place disc in following places:

− Direct sunlight for a long time

− Where humidity is high or in dusty place

− Where there is heat from a heater, etc.

Block noise

001/ 006All Prog ra

m

s

PLAY

Fig. 1

*

001 / 002All Progra

m

s

PLAY

(Recording one scene

may produce multiple

thumbnails.)

English

9

DISC CLEANING

Use the disc cleaning cloth provided to lightly

wipe off any dirt adhering to the disc as shown

in the figure. Do not wipe the disc with force:

Doing so could cause scratches.

Never use solvent (thinner, water, antistat or

detergent) for cleaning.

Lightly wash the dirty cleaning cloth with

detergent: The dirt removal capacity of the cloth

will improve (rinse the cloth well with water so

that no detergent remains).

Read This First

To guide you, we have included following five chapters.

• The section on “Setups” explains how to set

up the DVD video camera/recorder, battery,

and set the date/time.

• The section on “Basic Techniques” explains the

basic operation of this DVD video camera/

recorder – recording of movies, still images,

external input, and playback of recorded

images.

• The section on “Disc Navigation” explains

editing with Disc Navigation: Refer to this

section when finalising DVD-RW/DVD-R/

+RW disc and initialising DVD-RAM/DVD-

RW/+RW disc.

• The section on “Connecting to PC” explains

the contents of provided CD-ROM and how to

install the software included.

• “Subsidiary Information” includes an

introduction to products sold separately, and

troubleshooting.

We want this manual to be as helpful as

possible, so it includes two easy ways to find the

information you need:

• A quick index for the information you use

most often.

• A detailed table of contents directing you to

specific information quickly (see pages 11 –

13).

Get to know your DVD video camera/recorder by

using this manual, and get to know Hitachi. We

appreciate your business.

Quick Index

Available Discs ................................................ 23

Recording Movie ............................................. 40

Playing Back.................................................... 68

Functions Available with Disc Navigation ........ 75

Connecting to a TV........................................ 105

Connecting to PC .......................................... 111

Use the disc cleaning

cloth to clean from inner

to outer edges in axial

direction.

With this DVD video camera/recorder you can view the picture being recorded or the playback

picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor

switches the picture to appear on the LCD monitor or in the viewfinder.

It is possible to switch the language in the on-screen display of this DVD video camera/recorder

(see page 33).

English

10

About This Manual

●Displays in this manual

Understand that the displays are different from those you will actually see in the viewfinder or on

the LCD screen.

●Notation of cancel button

Press the STOP/EXIT button to stop your operation midway, or return the menu screen to the

preceding one. The expression “press the  button” will be used in this text.

●, , , ,  and  marks beside headings

Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to

the marks at right above each function to identify whether the disc or card is compatible with the

function. Refer to these marks and identify the functions and operation to match the disc or card you

use.

●Illustrations in this manual

Although the external appearances of DZ-GX5100SW/GX5060SW are different, the method of

operating these models is identical.

The illustrations of DZ-GX5100SW are used for the explanation in this text.

Microsoft

®

, Windows

®

, Windows

®

Me, Windows

®

2000 Professional, and Windows

®

XP are

registered trademarks of Microsoft Corporation.

Windows Vista™ is a trademark of Microsoft Corporation.

Intel

®

, Pentium

®

Processor, and Celeron

®

Processor are registered trademarks of Intel Corporation.

Macintosh is a trademark of Apple Computer, Inc.

IBM

®

and PC/AT

®

are registered trademarks of International Business Machines Corporation.

Manufactured under licence from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each

individual company.

SD logo is a trademark.

English

11

Table of Contents

Important Information .........................................2

For Your Safety ..................................................2

Precautions ........................................................2

IMPORTANT SAFETY INSTRUCTIONS...........3

Cautions When Using ........................................4

Cautions When Storing ......................................7

Suggestions and Restrictions.............................7

CLEANING ............................................................8

HANDLING DISCS ................................................ 8

DISC CLEANING................................................... 9

Read This First...................................................9

About This Manual ...........................................10

Table of Contents.............................................11

Checking Provided Accessories.......................14

Names of Parts ................................................15

Setups

Demonstration Function ...................................19

Setting Up the DVD Video Camera/

Recorder........................................................19

HOLDING DVD VIDEO CAMERA/

RECORDER ..................................................... 19

ATTACHING SHOULDER STRAP...................... 19

ATTACHING LENS CAP ..................................... 20

INSERTING BATTERY INTO REMOTE

CONTROL ........................................................20

REMOVING BATTERY FROM REMOTE

CONTROL ........................................................21

Discs and Cards...............................................22

AVAILABLE DISCS ............................................. 23

INFORMATION ON DVD-R DISC .......................23

NOTES ON FINALISATION ................................ 23

EXAMPLES OF DISCS THAT CANNOT BE

USED ON THIS DVD VIDEO CAMERA/

RECORDER ..................................................... 24

AVAILABLE CARDS............................................ 24

COMMON CAUTIONS FOR DISC AND CARD .......24

Preparations for Power Supply ........................25

USING DVD VIDEO CAMERA/RECORDER

WITH AC ADAPTER/CHARGER...................... 25

Setting Up the Battery ......................................26

CHARGING BATTERY........................................ 26

ATTACHING BATTERY TO DVD VIDEO

CAMERA/RECORDER..................................... 27

REMOVING BATTERY........................................ 27

BATTERY REMAINING LEVEL INDICATOR......29

EFFICIENT USE OF BATTERY .......................... 29

Turning DVD Video Camera/Recorder

On and Off .....................................................30

VIEWING IMAGE ON LCD MONITOR

SCREEN........................................................... 31

VIEWING SUBJECT THROUGH

VIEWFINDER ................................................... 31

Setting Date and Time..................................... 32

CHANGING DISPLAY FORMAT OF

DATE AND TIME ..............................................32

Initial Settings.................................................. 33

SWITCHING OPERATING SOUND ON OR OFF

(BEEP) ..............................................................33

TURNING DVD VIDEO CAMERA/RECORDER

OFF AUTOMATICALLY (POWER SAVE) ........33

CHANGING DISPLAY LANGUAGE

(LANGUAGE)....................................................33

RESETTING MENU SETTINGS TO DEFAULTS

(RESET)............................................................34

TURNING RECORD LED ON OR OFF

(RECORD LED) ................................................34

CHANGING SETTING OF

DEMONSTRATION ..........................................34

LCD/EVF Setup............................................... 35

ADJUSTING BRIGHTNESS OF LCD SCREEN

(LCD BRIGHTNESS) AND VIEWFINDER

(EVF BRIGHTNESS) ........................................35

ADJUSTING COLOUR DENSITY

(COLOUR LEVEL) ............................................36

ALWAYS DISPLAYING IMAGE IN

VIEWFINDER ...................................................36

Inserting and Removing Disc .......................... 37

Inserting and Removing Card.......................... 39

Basic Techniques

Recording Movie ............................................. 40

Recording Stills ............................................... 41

Swift Restart of Recording

(SLEEP/RESTART button)........................... 42

On-Screen Information.................................... 43

INFORMATION DISPLAY DURING

RECORDING ....................................................43

Checking Flow of Menu................................... 48

Zooming .......................................................... 50

MACRO RECORDING ........................................50

RECORDING SUBJECTS FOR STRONGER

WIDE-ANGLE OR TELEPHOTO EFFECT .......51

Manually Focusing Subject ............................. 52

FOCUSING DURING RECORDING....................52

Adjusting Brightness of Image to be recorded

(Exposure) .................................................... 54

Compensating for Backlight ............................ 54

Using Full Auto Function ................................. 55

Setting Up Camera Functions ......................... 56

SELECTING SHOOTING MODE TO MATCH

THE SUBJECT

(SWITCHING PROGRAMME AE MODE) ........56

RECORDING DARK SUBJECTS USING LCD

MONITOR LIGHT .............................................57

ADJUSTING COLOUR (WHITE BALANCE) .......57

English

12

USING THE ELECTRONIC IMAGE

STABILISER (EIS)............................................ 59

RECORDING SUBJECT USING LARGE

MAGNIFICATION (DIGITAL ZOOM)................ 59

REDUCING WIND NOISE DURING

RECORDING (MIC.FILTER) ............................ 59

Setting Up Record Functions........................... 60

SWITCHING MOVIE QUALITY

(VIDEO MODE) ................................................ 60

SETTING TO WIDE TV SCREEN MODE

(16:9 MODE)..................................................... 61

SWITCHING QUALITY OF STILL IMAGE

(QUALITY)........................................................ 63

RECEIVING IMAGE FROM ANOTHER DEVICE

(INPUT SOURCE) ............................................ 63

SWITCHING EXTERNAL INPUT RECORDING

METHOD (PHOTO INPUT) .............................. 64

SELF-TIMER ....................................................... 64

SETTING ON-SCREEN DISPLAY OUTPUT

ON OR OFF (OSD OUTPUT)........................... 65

Using External Microphone.............................. 65

Disc Navigation

Using Disc Navigation......................................66

STARTING OR TERMINATING DISC

NAVIGATION.................................................... 66

PLAYING BACK FROM DISC NAVIGATION

SCREEN........................................................... 68

ADJUSTING VOLUME DURING PLAYBACK..... 68

PLAYING BACK LATEST RECORDED

SCENE ............................................................. 69

DELETING LAST RECORDED SCENE.............. 69

CAPTURING PHOTO.......................................... 70

SEARCH PLAYBACK OF MOVIE....................... 70

FRAME ADVANCE/FRAME BACK/SLOW

PLAYBACK OF MOVIE .................................... 70

SKIP PLAYBACK OF MOVIE.............................. 71

PLAYING BACK STILLS ..................................... 71

JUMPING TO SPECIFIED POINT (GO TO) ....... 72

INFORMATION DISPLAY DURING

PLAYBACK....................................................... 73

SELECTING MULTIPLE SCENES...................... 74

SELECTING CONSECUTIVE SCENES

TOGETHER...................................................... 74

FUNCTIONS AVAILABLE WITH DISC

NAVIGATION.................................................... 75

UNDERSTANDING FLOW OF DISC

NAVIGATION MENU........................................ 76

Scene...............................................................78

DELETING SCENES (EDIT – DELETE) ............. 78

DIVIDING MOVIES (EDIT – DIVIDE) .................. 79

COMBINING MULTIPLE SCENES

(EDIT – COMBINE) .......................................... 80

ARRANGING ORDER OF SCENES

(EDIT – MOVE)................................................. 80

DIRECTING SCENES EFFECTIVELY

(EFFECT – FADE)............................................ 81

PLAYING BACK BY SKIPPING SCENES

(EFFECT – SKIP) ............................................. 82

CHANGING IMAGES FOR THUMBNAILS

(EFFECT – THUMBNAIL)................................. 83

COPYING STILLS ON DVD-RAM DISC TO

CARD (COPY) ..................................................84

LOCKING SCENES ON CARD (LOCK)..............85

SELECTING SCENES USING MENU SCREEN

(SELECT) .........................................................86

DISPLAYING INFORMATION USING MENU

SCREEN (DETAIL)...........................................87

Programme ...................................................... 88

WHAT IS “PROGRAMME”? ................................ 88

SWITCHING TO THUMBNAIL DISPLAY OF

SPECIFIC DATE (SELECT) ............................. 88

PLAYING BACK PROGRAMME (PLAY).............89

CHANGING TITLE OF PROGRAMME

(TITLE)..............................................................89

Play List ........................................................... 91

WHAT IS “PLAY LIST”?....................................... 91

CREATING NEW PLAY LIST (CREATE) ............91

SWITCHING TO DISPLAY OF EACH

PLAY LIST (SELECT)....................................... 92

PLAYING BACK A PLAY LIST (PLAY)................92

ADDING SCENES TO PLAY LIST

(EDITING PLAY LIST) ......................................93

DELETING SCENES FROM PLAY LIST

(EDITING PLAY LIST) ......................................94

ADDING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................94

DELETING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................95

SELECTING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................95

ARRANGING ORDER OF SCENES (MOVE) .....96

CHANGING TITLE OF PLAY LIST (TITLE).........97

DELETING PLAY LIST (DELETE).......................97

Go To............................................................... 98

TOP (END) .......................................................... 98

Disc or Card Management...............................98

INITIALISING DISC OR CARD

(FORMAT DISC. FORMAT CARD) .................. 98

PROTECTING DISC FROM WRITING

(PROTECT DISC).............................................99

VERIFYING REMAINING FREE SPACE

ON DISC OR CARD (CAPACITY) .................... 99

UPDATING CONTROL INFORMATION OF

DVD-RAM/DVD-RW (VR-MODE) DISC

(UPDATE CONTROL INFO.)..........................100

FINALISING DVD-RW/DVD-R/+RW DISC

(FINALIZE DISC) ............................................101

ADDITIONALLY RECORDING ON FINALISED

DVD-RW (VF-MODE)/+RW

(UNFINALIZE DISC).......................................102

Others ............................................................ 103

DISPLAYING MOVIES OR STILLS

INDEPENDENTLY (CATEGORY) ..................103

PLAYING BACK SCENES REPEATEDLY

(REPEAT PLAY).............................................103

PLAYING BACK WIDE-MODE IMAGES ON 4:3

DISPLAY TV (TV TYPE).................................104

SLIDE SHOW (CONTINUOUS PLAYBACK OF

STILLS)...........................................................104

English

13

Viewing on TV Screen....................................105

CONNECTING TO A TV....................................105

VIEWING ON TV SCREEN ...............................106

Playback on DVD Recorder/Player ................107

PLAYING BACK DVD-RAM/DVD-RW

(VR-MODE) DISC........................................... 107

PLAYING BACK DVD-RW (VF-MODE)/DVD-R/

+RW DISC ...................................................... 107

Recording (Dubbing) Images .........................108

RECORDING (DUBBING) IMAGES FROM

OTHER VIDEO DEVICE................................. 108

RECORDING (DUBBING) IMAGES ON OTHER

VIDEO DEVICES............................................110

Connecting to PC

Software Provided..........................................111

Requirements of available PC........................112

Installing Software..........................................113

Connecting to PC via PC Connection Cable..116

USING DISC IN DVD DRIVE BUILT

INTO PC .........................................................118

BEFORE TERMINATING PC CONNECTION

(UNPLUGGING PC CONNECTION CABLE)/

CHANGING OVER POWER SWITCH ........... 119

Using ImageMixer 3 for Windows ..................120

VIEWING IMAGES RECORDED ON DISC

USING PC ...................................................... 120

CREATING DVD-VIDEO USING IMAGES

RECORDED ON DISC ................................... 121

Using ImageMixer 3 Mac Edition

for DVDCAM................................................124

VIEWING IMAGES RECORDED ON DISC

USING MACINTOSH......................................124

IMPORTING IMAGES RECORDED ON DISC

INTO MACINTOSH......................................... 125

CREATING DVD-VIDEO USING IMAGES

RECORDED ON DISC ................................... 126

Uninstalling Software .....................................128

Contact The Following ...................................128

Cautions when connecting DVD video

camera/recorder to PC ................................129

Subsidiary Information

Introduction to Optional Accessories..............130

CAMERA ACCESSORIES ................................130

POWER SUPPLY.............................................. 130

Trouble Messages..........................................131

Troubleshooting .............................................137

System Reset.................................................145

Major Specifications .......................................146

STORAGE CAPACITY OF DISC.......................148

SIZE AND QUALITY OF PHOTOS....................149

RECORDABLE STILLS (PHOTOS) ON

CARD.............................................................. 149

Index ..............................................................150

Be sure to read the following before opening

the package of CD-ROM .............................152

TOC

English

14

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP07PW):

Portable power supply for this DVD video

camera/recorder. Charge it before use.

AC adapter/charger

(model DZ-ACS3 (SW)):

Used to power the DVD video camera/

recorder from AC outlet, or charge battery.

DC power cord:

When powering the DVD video camera/

recorder from household AC outlet, use

this cord to connect the DVD video

camera/recorder and AC adapter/charger.

Mains lead:

Connect between household AC outlet and AC adapter/charger.

For China

1 cable included.

For regions other than China

3 cables included. Select an appropriate lead for your region.

Infrared remote control

(model DZ-RM4W):

Use to control the DVD video camera/

recorder from a distance.

For DZ-GX5100SW only.

Lithium battery (model CR2032):

To power the remote control.

For DZ-GX5100SW only.

AV/S input/output cable:

Used when viewing the picture played back

on the DVD video camera/recorder on TV

screen, or input or output video from/to

another video device. For DZ-GX5100SW

only.

AV/S output cable:

Used when viewing the picture played back

on the DVD video camera/recorder on TV

screen, or output video to another video

device. For DZ-GX5060SW only.

Lens cap and lens cap string:

Attach the lens cap when not recording, to

protect the lens.

Software CD-ROM:

Use this CD-ROM when connecting the

DVD video camera/recorder to PC.

PC connection cable:

Use this cable when connecting the DVD

video camera/recorder to PC.

Disc cleaning cloth:

Always use this to clean discs.

Shoulder strap:

Attach to the DVD video camera/recorder

to hang it from shoulder.

WARNING: Keep

this battery away

from children. If

swallowed, consult

a physician

immediately for

emergency

treatment.

English

15

Names of Parts

1 Lens cap string attachment hole (p. 20)

2 Stereo microphone

Take care that the microphone is not blocked

by a hand, etc., during recording.

3Recording indicator (p. 34)

The red indicator will light during recording.

4 Infrared receiver

(for DZ-GX5100SW only) (p. 21)

When the remote control is used to operate

the DVD video camera/recorder, this

receiver will receive the infrared signal.

5Optical 15× zoom lens

(for DZ-GX5100SW only)

Optical 30× zoom lens

(for DZ-GX5060SW only) (p. 50)

6 Zoom lever (p. 50, 52, 68)

To adjust the zoom or volume.

7PC connection terminal (TO PC) (p. 116)

8 AV input/output jack

(for DZ-GX5100SW only)

AV output jack

(for DZ-GX5060SW only) (p. 105, 108, 110)

9 External microphone jack (for DZ-

GX5100SW only) (p. 65)

10 Wide-screen colour liquid crystal display

(inside) (p. 31)

10

8

4

5

6

(Inside the cover)

7

123

9

Although the external appearances of DZ-

GX5100SW, DZ-GX5060SW are different, the

method of operating these models is identical.

DZ-GX5100SW illustrations are used in this

manual.

English

16

11 Viewfinder (p. 31)

12 Dioptre control (p. 31)

To adjust the focus of image appearing in the

viewfinder. (Pull out the viewfinder.)

13 SLEEP/RESTART button (p. 42)

To switch the sleep/restart status between

ON and OFF.

14 ACCESS/PC indicator (p. 6, 40, 41)

Will blink or light when the disc in DVD

video camera/recorder is accessed (write or

read is executed) or the DVD video camera/

recorder is connected to PC.

15 PHOTO button (p. 41)

16 DISC EJECT button (p. 37)

Press down and release this button to open

the cover of disc insertion block.

17 Disc insertion block (p. 37)

18 BATTERY EJECT button (p. 27)

Press this button when removing the battery.

19 Battery attachment platform (p. 27)

20 Record button (REC) (p. 40)

21 LOCK switch (p. 40)

It is recommended that you set the LOCK

switch to  (to the upper position) to prevent

the power switch in the “!” position from

accidentally moving to “ ”.

22 Power switch (p. 30)

23 Hand strap (p. 19)

12 13 14

18

15

19 20 22 23

17

21

1611

English

17

24 FULL AUTO button (p. 55)

To switch the DVD video camera /recorder

to full automatic.

25 FOCUS button (p. 52)

To switch between manual focus and auto-

focus.

26 MENU button (p. 32, 48, 79)

Press this button to display the menu for

setting camera functions and Disc

Navigation.

27 SELECT button (p. 74)

28 DISC NAVIGATION button (p. 66)

29 STOP/EXIT button (p. 10, 48, 69)

To end playback or cancel setting of menu.

30 EXPOSURE button (p. 54)

Press this button to adjust the exposure.

31 Speaker (p. 68)

32 RESET button (p. 145)

To reset all settings to defaults (status when

the DVD video camera/recorder was

shipped from the factory).

33 DISPLAY (Screen display) button (p. 43, 73)

Press this button to display the details of

image being played back or camera setting

status, or switch the display off.

34 CARD ACCESS indicator (p. 6, 41)

35 QUICK MENU button (p. 48)

To display only the functions that you

frequently use (simple menus).

36 FINALIZE button (p. 101)

Press this button to finalise the recorded

DVD-RW/DVD-R/+RW.

37 Card insertion block (p. 39)

38 BLC (backlight compensation) button

(p. 54)

Press this button when subject is being

lighted from rear.

39 2 / 1 / 0 / / /  buttons

(p. 32, 48, 52, 54, 69, 70, 71)

Use these buttons to select a scene or menu

item, and then press the centre () to play

back the scene, or designate an option from

the menu.

These buttons are to adjust exposure or focus.

40 Tripod threaded hole

Used to attach the DVD video camera/

recorder to a tripod.

25 26 27 28 29 30

31 3833 34 35 3632

24

3937

40

English

18

41 PHOTO button (p. 41)

42 REC button (p. 40)

43 MENU button (p. 32, 48, 79)

44 SELECT button (p. 74)

45 Reverse search button (p. 70)

46 DELETE button (p. 78)

47 DISC NAVIGATION button (p. 66)

48 DISPLAY button (p. 43, 73)

49 ZOOM T button (p. 50)

50 DIGITAL ZOOM button (p. 50)

51 ZOOM W button (p. 50)

52 Reverse skip button (p. 71)

53 Forward search button (p. 70)

54 Play/pause button (p. 69)

55 Stop button (p. 10, 48, 69)

56 Forward skip button (p. 71)

* The buttons on remote control will function the same as those on DVD video camera/recorder.

REC

PHOTO

DIGITAL

ZOOM

MENU

SELECT

DELETE

DISC

NAVIGATION

DISPLAY

41

42

43

44

45

46

47

50

48

49

52

51

53

54

55

56

19

English

Setups

This section explains preparations for recording – setting up the DVD video camera/recorder

and battery.

Demonstration Function

This DVD video camera/recorder is equipped with a demonstration function.

The default at purchase time is “Auto”, which will automatically start the demonstration approx. three

minutes after the DVD video camera/recorder is turned on.

Refer to “CHANGING SETTING OF DEMONSTRATION” on page 34 if

you wish to view the demonstration immediately or change the setting

to “Off”.

Setting Up the DVD Video Camera/Recorder

HOLDING DVD VIDEO CAMERA/RECORDER

Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.

Put your hand in a position where you can easily operate the REC button and the Zoom lever.

Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the

REC button with your thumb.

ATTACHING SHOULDER STRAP

Pass the shoulder strap through

the shoulder strap attachments.

Be sure to pass through the 2 slots.

English

20

ATTACHING LENS CAP

1 Attach the shorter end of lens cap string to

the lens cap.

2 Attach the longer end of lens cap string to the

attachment hole of DVD video camera/

recorder.

3 Push the both sides of cap inward and attach

it over the lens.

Note:

• Always keep the lens cap on when not using the DVD

video camera/recorder, to protect the lens.

• When recording, attach the lens cap to the hand strap

by hooking the tab inside the cap onto strap for

comfortable shooting.

INSERTING BATTERY INTO REMOTE CONTROL

Insert the provided lithium battery into remote control.

1 While inserting a fine rod into the hole

marked PUSH, pull the battery holder out

forward.

2 Insert the lithium battery with the positive $

terminal facing down.

3 Slide the cover to close it.

Note:

• The life of lithium battery is approximately one year. If

the battery is discharged, no operation is possible

with remote control: Replace the battery.

• The remote control (DZ-RM4W) and lithium battery

(CR2032) are supplied only with the DZ-GX5100SW.

Shorter end

Longer end

Push and fit

Battery holder

La pagina sta caricando ...

Hitachi DZ-GX5100SW Manuale utente

Questo manuale è adatto anche per

Hitachi DZ-GX5100SW Manuale utente

in altre lingue

Documenti correlati

Altri documenti