7
Programme overview also see Page 5
After drying: laundry is to be ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Towelling
dressing gowns
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
towels
cironed
lightly ironed dry
@cnot ironed
cpassed through a mangle
Cottons
max. 7 kg
For whites and coloureds/cotton or linen.
Iron Dry ø@
è* * è* è* è* è* è* è* è*
Cupboard Dry @
* * * è* è* è* * è* è*
Very Dry @
* è* è* è* * è* è*
Extra Dry @
è* è* è* *
Easy-Care
max. 3.5 kg For non-iron laundry made of synthetic fibres and blended fabric, cotton.
Iron Dry cø@c
* è* è* è* è* è* è* *
Cupboard Dry @ * è* è* * * * *
Very Dry @ è* è* è*
! MIx
max. 3 kg
For mixed items of laundry made of cotton and easy-care fabrics.
Cupboard Dry/Iron Dry
Freshen up
max. 3 kg
For cotton or linen fabrics that are still damp and easy-care fabrics. Creasing in fabrics is reduced. Fabrics are not dried
completely. Hang up fabrics!
$ Sportswear
max. 1.5 kg
For fabrics with membrane coating, water-repellent fabrics, functional clothing, fleece fabrics (dry jackets/trousers with
removable internal lining separately).
Woollens
Finish
max. 3 kg
For woollen fabrics suitable for machine-washing. Fabrics become fluffier but not dry.
Remove fabrics once the programme has ended and allow to dry.
Super Quick 40
max. 2 kg
For laundry made of synthetic fibres, cotton or blended fabrics (for example) that needs to be dried quickly. The values may
differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the fabric
and loading capacity.
Timed Programme warm
max. 3 kg
For pre-dried, multi-layered, sensitive fabrics made of acrylic fibres, or separate small items of laundry.Also for subsequent
drying.
Timed Programme cold
max. 3 kg
For all types of fabrics. For freshening up or airing of items of laundry that have been worn for a short period of time.
Further information: http://www.bosch-hausgeraete.de
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
D-81739 Munich/Germany
WTW84560GB
0509 en
9000 415833
8
Installation
Delivery specification: dryer, instructions for installation and use.
Check dryer for transport damage.
The dryer is very heavy. Do not attempt to lift it on your own.
Be careful to avoid sharp edges.
Do not lift the dryer by any of the protruding parts (e.g. the door) as they may break off.
Do not set up in a room that is susceptible to frost.
Freezing water may cause damage.
If in doubt, have the appliance connected by an expert.
Setting up the dryer
The appliance plug must always be accessible.
Ensure that the appliance is installed on a clean, level
and solid surface.
Keep the cooling grille at the front of the dryer
unobstructed.
Keep the area around the dryer clean.
Make the dryer level using the threaded feet
and a spirit level.
Do not unscrew the threaded feet further than 20 mm.
Do not remove the threaded feet under any
circumstances.
Mains connection see safety instructions -> Page 11.
Connect to an AC earthed socket. If in doubt have the socket checked by an expert.
The mains voltage and the voltage shown on the rating plate (-> Page 9) must correspond.
The connected load and necessary fuse protection are specified on the rating plate.
Frost protection
Preparation
1. Empty the condensation container -> Page 4.
2. Turn the programme selector to any programme.
3. Press the Start/Stop button -> condensation is pumped into the container.
4. Wait 5 mins., empty the condensation container again.
5. Turn the programme selector to Off.
Transport
Preparation of dryer -> see Frost protection.
Transport the dryer in a vertical upright position.
Following transportation, leave the dryer to stand for one hour.
The dryer contains residual water;
this can flow out if the dryer is tilted.
Take all accessory parts
out of the drum.
The drum must be empty.
Make sure that the air
inlet remains unobstructed
Clean and level
Do not operate the dryer if
there is a danger of frost.
Do not set up the dryer behind a door or sliding
door as this may obstruct or prevent the dryer door
from opening. This will prevent a potentially fatal
danger to children from locking themselves in.
9
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approximately 53 kg
Max. capacity 7 kg
Condensation container 4.0 l
Connection voltage 220-240 V
Connected load max. 1500 W
Fuse protection 10 A
Ambient temperature 5 - 35 °C
Product number/
Production number
Inside of door
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions.
Spin speed in rpm
(residual moisture)
Drying time**
in min.
Energy
consumption**
in kWh
Cottons 7 kg
Cupboard Dry* 1400 (approx. 50 %) 106 1.61
1000 (approx. 60 %) 124 1.90
800 (approx. 70 %) 143 2.19
Iron Dry* 1400 (approx. 50 %) 73 1.11
1000 (approx. 60 %) 91 1.40
800 (approx. 70 %) 110 1.70
Easy-Care 3.5 kg
Cupboard Dry* 800 (approx. 40 %) 48 0.64
600 (approx. 50 %) 59 0.79
*Test program according to DIN EN 61121
**The values may differ from the those specified depending on the type of fabric, mixture of
laundry to be dried, residual moisture in the fabric and loading capacity.
ʠ
Drum interior light (bulb E14, 15 W)
The drum is illuminated after the door is opened or closed, and also after the programme is
started. It goes out automatically. Replacing the bulb -> Page 10.
Optional accessories
Order no.:
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space.
This connection set must always be used to secure the dryer to the washing machine.
Same as WTZ 11310, but with pull-out worktop.
Installation underneath the worktop
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
Platform
Facilitates loading and unloading the appliance.
The basket contained in the drawer can be used to carry the laundry.
10
What to do if ...
Repairs must only be carried out by the aftersales service or an authorised expert.
Before you contact the after-sales service, please make sure that you are unable to resolve
the problem yourself. You will be charged for advice if a technician is called out, even during
the warranty period. You can find your nearest customer services in the enclosed list. When
contacting the after-sales service, please specify the product number (E-Nr.) and production
number (FD) of your appliance (see inside of door).
ʠ
The Start/Stop indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The ā symbol and Start/Stop
indicator lamp flash.
Empty the condensation container.
Clean the condensation container filter if necessary ->Page 6.
ʠ
The 4 symbol and Start/Stop
indicator lamp flash.
Clean the fluff filter -> Page 4.
ʠ
Dryer does not start. Start/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out. Make sure the dryer is level.
ʠ
The door opens by itself. Push the door closed until you hear it engage.
ʠ
The required degree of
dryness was not achieved or
the drying time was too long.
Clean the fluff filter -> Page 4.
Empty condensation container -> Page 4.
Ambient temperature higher than 35 °C -> airing.
Air inlet may be blocked -> keep unobstructed.
Was an unsuitable programme selected? -> Page 7.
Laundry too dry? The laundry in a dryer with a heat
exchanger requires sufficient residual moisture.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure -> Restart the dryer.
Fine layer of scale on the moisture sensors -> Clean the
moisture sensors -> page 6.
ʠ
Laundry damp. Use the next drying programme up or use the timer
programme as a supplement -> Page 7.
Warm laundry feels damper than it really is!
ʠ
The moisture content of the room
has increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked? -> keep unobstructed.
ʠ
Cln appears in the display
panel.
Not an error! Automatic cleaning of heat exchanger.
Do not empty the condensation container.
ʠ
Mains failure. Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ The interior light is not working. Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screw driver) and
replace the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
ʠ
Other intermittent noises and
vibrations.
Not an error!
Automatic cleaning of the heat exchanger.
ʠ
Loud humming noise for
several seconds.
Has the condensation container been properly reinserted?
-> slide the condensation container in fully.
ʠ
If you cannot rectify a fault yourself or a repair is necessary:
Turn the programme selector to Off.
Remove the appliance plug from the socket.
Call the after-sales service -> see the after-sales service directory.
11
Safety instructions
Emergency
Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
In rooms inside the house.
To dry fabrics.
The dryer must
NEVER...
Be used for other purposes than those described above.
Be modified in terms of its technology or attributes.
Dangers
The dryer must not be used by children or persons who have not been
instructed in its use.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
Remove all objects from pockets.
Make especially sure that cigarette lighters are removed as they constitute an
-> explosion hazard.
Do not lean or sit on the door -> risk of tipping.
Installation
Secure loose cables -> tripping hazard.
Do not operate the dryer if there is a risk of frost.
Mains
connection
Connect the dryer according to specifications to an AC earthed socket, as
otherwise it cannot be guaranteed that the appliance is completely safe.
The cable cross-section must be sufficient.
Only use earth-leakage circuit breakers with the following symbol:
The appliance plug and socket must be compatible.
Do not use multiple plugs/couplings and/or extension cables.
Do not hold the appliance plug with wet hands -> risk of electric shock.
Never pull the appliance plug out of the socket by its cable.
Do not damage the mains lead -> risk of electric shock.
Operation
Only load the drum with laundry.
Check the contents before you switch the dryer on.
Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) -> fire/explosion hazard.
Dust (e.g. coal dust, flour) poses a danger: do not use the dryer
->explosion hazard.
Do not put laundry containing foamed material/rubber in the dryer -> elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
Switch off the dryer once the programme has ended.
Condensation is not drinking water and may be contaminated with fluff.
Defect
Do not use the dryer if it is defective or if you suspect it is.
Repairs must only be carried out by the after-sales service.
Do not use the dryer if the mains cable is defective. To avoid danger, only
have the defective mains cable replaced by the after-sales service.
Always pull the mains plug out of the socket before changing the bulb for the
interior light -> risk of electric shock.
Spare parts
Only use genuine spare parts and accessories for safety reasons.
Disposal
Dryer: pull out the appliance plug, then cut off the mains cable from the
appliance.
Dispose of at municipal waste disposal facility.
Packaging: do not leave children alone with packing parts
-> risk of suffocation.
The heat exchanger contains coolant -> Dispose of it in the proper manner.
All materials are environmentally sound and can be reused. Dispose of in an
environmentally-responsible manner.
Instructions for
installation and use
Tumble dryer
Read these instructions before operating the dryer.
en
Observe the safety instructions on page 11.