Gateway DC-T20 Manuale utente

Tipo
Manuale utente
1
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:441
2
FCC STATEMENT
FCC declaration of conformity
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax:(605) 232-2023
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation
Note: This equipment has been tested and found to comply with the limits for Class B digital
devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
Consult the dealer or an experienced radio/TV technician for help
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:442
3
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the
FCC rules. Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could be
required to stop operation of the equipment.
TRADEMARK INFORMATION
© 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway
stylized logo, and the black-and-white spot design are trademarks or registered
trademarks of Gateway, Inc. in the United States and other countries. All other brands
and product names are trademarks or registered trademarks of their respective
companies.
READ THIS FIRST
Notice:
1. Product design and specifications are subject to change without notice. This includes
primary product specifications, software, software drivers, and user’s manual. This User
Manual is a general reference guide for the product.
2. Gateway assumes no liability for any errors or discrepancies in this user’s manual.
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digit
al
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouilla
ge
radioélectrique édicté par Industrie Canada.
/NMB-003
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:443
4
WARNINGS
Do not use this camera if it is emitting smoke (or an unusual odor), if it becomes unusually
hot to the touch, produces a peculiar noise, or exhibits any other abnormal conditions.
Operating the camera in any of these circumstances may cause a fire or an electrical
shock. Stop using the camera immediately, turn the camera off and remove the batteries.
Contact Gateway for repairs. Never attempt to repair this camera by yourself, as this may
be dangerous.
Do not expose the camera to moisture and make sure no water gets into the camera. Take
particular care when using the camera under extreme weather conditions, such as rain or
snow, or when operating the camera at the beach or near water. Avoid using this camera
in places subject to extreme moisture. Do not use the camera if water has entered the
camera. Turn the camera off and remove the batteries. Contact Gateway. Do not continue
to use the camera as this may cause a fire or an electrical shock.
Do not use the camera if any foreign objects have entered the camera. Turn the camera off
and remove the batteries. Contact Gateway. Do not continue to use the camera as this
may cause a fire or an electrical shock.
Do not place the camera in an unstable location such as on a wobbly table or sloping
surface where the camera may fall or tip over and cause injury. If the camera has been
dropped or damaged, turn the camera off and remove the batteries. Contact Gateway. Do
not continue to use the camera as this may cause a fire or an electrical shock.
Do not insert or drop metallic or other foreign objects into the camera through access
points such as the SD memory card slot. This may cause a fire or an electrical shock.
Do not attempt to modify this camera. Do not remove the camera casing. This may cause
a fire or an electrical shock. Internal inspection and repairs should only be carried out by
an authorized service facility.
Never operate this camera in any way while driving a vehicle. This may cause a traffic
accident.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:444
5
CAUTIONS
Do not place this camera in a location affected by oil fumes or steam, such as near a
cooking stove or humidifier. This may cause a fire or an electrical shock.
Do not leave this camera in a location subject to extremely high temperatures, such as in a
sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect
the camera case and internal components and may cause a fire.
Do not cover or wrap the camera with a cloth or quilt. This may cause heat to build up and
distort the camera case and cause a fire. Always use the camera and accessories in well-
ventilated locations.
Handle the camera carefully and do not expose the camera to shock or vibration. Handling
the camera roughly may cause a malfunction.
Do not use batteries other than those specified for use with your camera. Use of unsuitable
batteries may result in the batteries splitting, or leaking and may cause a fire, injury, or
soiling of the battery compartment.
When placing the batteries into the camera, check the polarity markings on the batteries
(- and + ) to ensure that the batteries are inserted correctly. Incorrect battery polarity will
result in camera inoperability and may result in the batteries splitting or leaking and causing
a fire, injury, or soiling of the battery compartment.
Remove the batteries if the camera will not be used for an extended period of time. The
batteries may leak and cause a fire, injury or soiling of the battery compartment. If the
batteries leak, clean and wipe the battery compartment carefully and install new batteries.
Wash your hands carefully if you touch the battery fluid.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:445
6
CONTENTS
Introduction..........................................................................................................................8
Package Contents
Getting to Know Your Camera...........................................................................................9
Names of Parts
LCD Monitor Indicator
Getting Started....................................................................................................................13
Installing Batteries
Attaching the Hand Strap
Inserting an SD Memory Card (optional accessory)
Setting the Date and Time
Record Mode.......................................................................................................................16
Taking Pictures
Using the Normal Mode
Digital Zoom Photography
Self-timer Photography
Using the Macro Mode
Setting the Flash
Setting the Image Resolution and Quality
Playback Mode....................................................................................................................24
Playing Back Photographed Images (Single-Frame Playback)
Displaying Thumbnail Images
Viewing Image Information
Zoom Playback
Slideshow Display
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:446
7
Movie Mode........................................................................................................................27
Recording Video Clips
Viewing Video Clips
Deleting Images.................................................................................................................29
Formatting the SD Memory Card....................................................................................30
Protecting Images.............................................................................................................30
Setting the DPOF.................................................................................................................31
Menu Options.....................................................................................................................32
Record Menu
Movie Menu
Playback Menu
Setup Menu
Transferring Recorded Images/Video Clips Your Computer....................................40
Using the Camera as a PC Camera.................................................................................42
Specifications.....................................................................................................................45
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:447
8
Introduction
Thank you for the purchase of the digital camera. With the camera, you will live a whole new
camera experience and make photo shooting more interesting and fun. We will guide you
through the whole picture taking process. Keep this manual on hand and enjoy your time.
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
Digital camera
USB cable
Video cable
Software CD-ROM
User’s manual
Camera strap
Camera pouch
2 AA alkaline batteries
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:448
9
Getting to Know Your Camera
1
1920
10
9
11
12 14 13
15
17
16
18
4
6
7
5
3
2
8
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:459
10
Names of Parts
1. Shutter button
2. Strap eyelet
3. VIDEO OUT jack
4. Flash
5. Viewfinder window
6. Lens
7. Focus dial
8. USB connector
9. Viewfinder
10.
Power button
11.
Mode button
12. Menu button
13. Display button
Arrow button(up)
14. Quality/Resolution button
Arrow button(left)
15. Flash button
Arrow button(right)
16. Self-timer button
Arrow button(down)
17. Zoom button
OK button
18. LCD monitor
19. Tripod socket
20. Battery/card cover
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4510
11
LCD Monitor Indicator
The indicators displayed when recording images:
1. Record mode
2. Resolution
3. Quality
4. Card indicator
5. Number of recordable image
6. Flash
7. Self-timer
8. Digital zoom
9. EV compensation
*No indication: 0 EV
10. White balance
*No indication: Auto
11. Battery level
1. Movie mode
2. Resolution
3. Possible recording time
4. Recording state (in progress)
1
2 3
4
6
7
8
9
10
11
5
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4511
12
The indicators displayed when playing images back:
1. Playback mode
2. Resolution
3. Quality
4. Card indicator
5. File number
6. Battery level
7. Captured time
8. Captured date
1. Playback mode
2. File number
3. Movie indicator
4. Recorded time
1
2 3
4
6
7
8
5
0002
1
2
4
3
00:21
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4612
13
Getting Started
You use 2 AA size batteries (Alkaline, Ni-MH or Lithium) to power the camera.
Installing Batteries
1. Make sure the camera is turned off.
2. Slide the battery/card cover.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery/card cover firmly.
Note:
If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
Never use manganese batteries.
Never use batteries of different types (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4613
14
Attaching the Hand Strap
To prevent accidental dropping of the camera, always use the strap.
Attach the hand strap as follows:
1. Thread the small loop of the hand strap
through the strap eyelet on the camera.
2. Pull the large loop through the small loop
until the strap is firmly secured.
Inserting an SD Memory Card
The camera comes with 8MB of internal memory, allowing you to store images and video clips
in the camera. However, you can expand the memory capacity by using an optional SD
memory card so that you can store more images and video clips.
1. Make sure the camera is turned off.
2. Open the battery/card cover.
3. Insert an SD memory card:
The front side of the memory card (printed arrow)
should face towards the front side of the camera.
If the card cannot be inserted, check the orientation.
This camera is also compatible with the MultiMediaCard .
4. Close the battery/card cover.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4614
15
To remove a memory card:
Make sure the camera is off. Open the battery/card cover. Press lightly on the edge of the
memory card and it will eject.
Note:
To prevent valuable data from being accidentally erased
from an SD memory card you can slide the write protect
tab (on the side of the SD memory card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you
must unlock the card .
Setting the Date and Time
The date/time setting screen (on Step 5) will pop out under the two situations below:
When first turning the camera on.
When turning the power on after leaving the camera without batteries for an extended
period of time.
1. Turn the camera on by pressing the
button.
2. Toggle the button to
/ / mode.
3. Press the button.
4. SETUP MENU will be highlighted, and press the button.
5. Move to the DATE/TIME by using the
or button, and press the button.
DATE/TIME menu appears.
To select an item, press the or button.
To change the value for each option, press the or
button.
When all options are set, press the button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4615
16
Record Mode
Taking Pictures
Your camera is equipped with both an optical viewfinder and a 1.5" LCD monitor to compose
images. Taking images using the optical viewfinder will conserve battery power. If your
batteries are low, it is recommended that you only compose images by using the viewfinder.
Using the LCD monitor, you can compose images more accurately, but at the cost of battery
consumption. Always use the LCD monitor for macro shots, however, to avoid parallax
effects. The LCD monitor must be used when Digital Zoom is used.
Using the Viewfinder
1. Turn the camera on by pressing the button.
2. Toggle the button to the
mode.
3. Compose your shot in the viewfinder.
4. Press the shutter button.
Using the LCD Monitor
1. Turn the camera on by pressing the button.
2. Toggle the button to the
mode.
By default, the LCD monitor is on.
3. Compose your shot on the display screen.
4. Press the shutter button.
Note:
You may turn off the LCD monitor by pressing the button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4616
17
Note:
The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
Using the LCD monitor for an extended period of time will decrease the number of images
you can take. To increase battery longevity, turn the LCD monitor off and use the viewfinder
instead.
Always use the LCD monitor for macro shots.
The LCD monitor must be on when Digital Zoom is to be used.
Using the Normal Mode
Normal mode is used to take images where the distance to the subject is 3.9 ft (1.2 m) or more.
Select this mode for general shooting, including portraits and scenery.
1. Toggle the button to the
mode.
2. Set the focus dial to the
position.
3. Compose the picture.
4. Press the shutter button.
Note:
For better results, we recommend that you use the Normal mode if the distance to the
subject is 2.3 ft (0.7 m) or more.
Digital Zoom Photography
By using digital zoom, images appear closer. Whereas digital zoom is a compelling feature, the
more an image is enlarged (zoomed), the more pixilated (grainier) the image will appear. To
enable the digital zoom, toggle the button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4617
18
1. Toggle the button to the mode.
2. Turn on the LCD monitor by pressing the button.
3. To enable the digital zoom, press the button.
You may select 2X/3X/4X by toggling the button.
Normal display 2X 3X 4X
4. Press the shutter button to capture a "zoomed" image.
Self-Timer Photography
When the self-timer is used, the camera automatically takes a picture after 10 or 2 seconds.
This allows you to get into the scene when taking group images.
1. Secure the camera to a tripod or place it on a stable surface.
2. Power on the camera, and toggle the button to the mode.
3. Press the
button.
You may select or self-timer mode by toggling the
button.
[No display]Setting off
4. Compose the scene.
5. Press the shutter button.
The self-timer function is activated.
The photograph is then taken after the preset time.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4618
19
To cancel self-timer photography at any time, press the shutter button to disrupt the
sequence.
Note:
After an image is taken using the self-timer, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
Using the Macro Mode
Use the macro (close-up) mode to shoot a close-up of a subject (such as flowers or insects)
where the range is between 1.3~1.6 ft (0.4~0.5 m).
1. Toggle the button to the
mode.
2. Set the focus dial to the
position.
The
icon appears on the LCD monitor.
3. Compose the scene.
4. Press the shutter button.
To cancel macro photography at any time, set the focus dial to the position.
Note:
When shooting a close-up in macro mode, use the LCD monitor to compose your shot,
avoiding the off-center parallax phenomenon.
There is not a distinct point (subject range) at which normal mode is favored over macro
mode; take an image in both normal and macro modes and compare the results.
After a macro shot is taken, DO NOT FORGET to reset the lens to the normal position.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4619
20
Setting the Flash
The flash is designed to function automatically when lighting conditions warrant the use of the
flash. You can take an image using a flash mode suitable to your circumstances. If you change
the flash mode, the camera will retain that setting even if the camera is turned off.
1. Toggle the button to the
mode.
2. Press the
button repeatedly until your desired flash
mode appears on the LCD monitor.
3. Compose the image and press the shutter button.
IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4620
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45

Gateway DC-T20 Manuale utente

Tipo
Manuale utente

in altre lingue