Gateway DC-T20 Manuale utente

1

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:441

2

FCC STATEMENT

FCC declaration of conformity

Responsible party:

Gateway Companies, Inc.

610 Gateway Drive, North Sioux City, SD 57049

(605) 232-2000 Fax:(605) 232-2023

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1)This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation

Note: This equipment has been tested and found to comply with the limits for Class B digital

devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected

Consult the dealer or an experienced radio/TV technician for help

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:442

3

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the

FCC rules. Do not make any changes or modifications to the equipment unless otherwise

specified in the manual. If such changes or modifications should be made, you could be

required to stop operation of the equipment.

TRADEMARK INFORMATION

stylized logo, and the black-and-white spot design are trademarks or registered

trademarks of Gateway, Inc. in the United States and other countries. All other brands

and product names are trademarks or registered trademarks of their respective

companies.

READ THIS FIRST

Notice:

1. Product design and specifications are subject to change without notice. This includes

primary product specifications, software, software drivers, and user’s manual. This User

Manual is a general reference guide for the product.

2. Gateway assumes no liability for any errors or discrepancies in this user’s manual.

Canada

Industry Canada (IC)

Unintentional emitter per ICES-003

This digital apparatus does not exceed the Class B limits for radio noise emissions from digit

al

apparatus as set out in the radio interference regulations of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouilla

ge

radioélectrique édicté par Industrie Canada.

/NMB-003

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:443

4

WARNINGS

Do not use this camera if it is emitting smoke (or an unusual odor), if it becomes unusually

hot to the touch, produces a peculiar noise, or exhibits any other abnormal conditions.

Operating the camera in any of these circumstances may cause a fire or an electrical

shock. Stop using the camera immediately, turn the camera off and remove the batteries.

Contact Gateway for repairs. Never attempt to repair this camera by yourself, as this may

be dangerous.

Do not expose the camera to moisture and make sure no water gets into the camera. Take

particular care when using the camera under extreme weather conditions, such as rain or

snow, or when operating the camera at the beach or near water. Avoid using this camera

in places subject to extreme moisture. Do not use the camera if water has entered the

camera. Turn the camera off and remove the batteries. Contact Gateway. Do not continue

to use the camera as this may cause a fire or an electrical shock.

Do not use the camera if any foreign objects have entered the camera. Turn the camera off

and remove the batteries. Contact Gateway. Do not continue to use the camera as this

may cause a fire or an electrical shock.

Do not place the camera in an unstable location such as on a wobbly table or sloping

surface where the camera may fall or tip over and cause injury. If the camera has been

dropped or damaged, turn the camera off and remove the batteries. Contact Gateway. Do

not continue to use the camera as this may cause a fire or an electrical shock.

Do not insert or drop metallic or other foreign objects into the camera through access

points such as the SD memory card slot. This may cause a fire or an electrical shock.

Do not attempt to modify this camera. Do not remove the camera casing. This may cause

a fire or an electrical shock. Internal inspection and repairs should only be carried out by

an authorized service facility.

Never operate this camera in any way while driving a vehicle. This may cause a traffic

accident.

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:444

5

CAUTIONS

Do not place this camera in a location affected by oil fumes or steam, such as near a

cooking stove or humidifier. This may cause a fire or an electrical shock.

Do not leave this camera in a location subject to extremely high temperatures, such as in a

sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect

the camera case and internal components and may cause a fire.

Do not cover or wrap the camera with a cloth or quilt. This may cause heat to build up and

distort the camera case and cause a fire. Always use the camera and accessories in well-

ventilated locations.

Handle the camera carefully and do not expose the camera to shock or vibration. Handling

the camera roughly may cause a malfunction.

Do not use batteries other than those specified for use with your camera. Use of unsuitable

batteries may result in the batteries splitting, or leaking and may cause a fire, injury, or

soiling of the battery compartment.

When placing the batteries into the camera, check the polarity markings on the batteries

(- and + ) to ensure that the batteries are inserted correctly. Incorrect battery polarity will

result in camera inoperability and may result in the batteries splitting or leaking and causing

a fire, injury, or soiling of the battery compartment.

Remove the batteries if the camera will not be used for an extended period of time. The

batteries may leak and cause a fire, injury or soiling of the battery compartment. If the

batteries leak, clean and wipe the battery compartment carefully and install new batteries.

Wash your hands carefully if you touch the battery fluid.

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:445

6

CONTENTS

Introduction..........................................................................................................................8

Package Contents

Getting to Know Your Camera...........................................................................................9

Names of Parts

LCD Monitor Indicator

Getting Started....................................................................................................................13

Installing Batteries

Attaching the Hand Strap

Inserting an SD Memory Card (optional accessory)

Setting the Date and Time

Record Mode.......................................................................................................................16

Taking Pictures

Using the Normal Mode

Digital Zoom Photography

Self-timer Photography

Using the Macro Mode

Setting the Flash

Setting the Image Resolution and Quality

Playback Mode....................................................................................................................24

Playing Back Photographed Images (Single-Frame Playback)

Displaying Thumbnail Images

Viewing Image Information

Zoom Playback

Slideshow Display

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:446

7

Movie Mode........................................................................................................................27

Recording Video Clips

Viewing Video Clips

Deleting Images.................................................................................................................29

Formatting the SD Memory Card....................................................................................30

Protecting Images.............................................................................................................30

Setting the DPOF.................................................................................................................31

Menu Options.....................................................................................................................32

Record Menu

Movie Menu

Playback Menu

Setup Menu

Transferring Recorded Images/Video Clips Your Computer....................................40

Using the Camera as a PC Camera.................................................................................42

Specifications.....................................................................................................................45

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:447

8

Introduction

Thank you for the purchase of the digital camera. With the camera, you will live a whole new

camera experience and make photo shooting more interesting and fun. We will guide you

through the whole picture taking process. Keep this manual on hand and enjoy your time.

Package Contents

Carefully unpack your camera and ensure that you have the following items:

Common Product Components:

Digital camera

USB cable

Video cable

Software CD-ROM

User’s manual

Camera strap

Camera pouch

2 AA alkaline batteries

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:448

9

Getting to Know Your Camera

1

1920

10

9

11

12 14 13

15

17

16

18

4

6

7

5

3

2

8

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:459

10

Names of Parts

1. Shutter button

2. Strap eyelet

3. VIDEO OUT jack

4. Flash

5. Viewfinder window

6. Lens

7. Focus dial

8. USB connector

9. Viewfinder

10.

Power button

11.

Mode button

12. Menu button

13. Display button

Arrow button(up)

14. Quality/Resolution button

Arrow button(left)

15. Flash button

Arrow button(right)

16. Self-timer button

Arrow button(down)

17. Zoom button

OK button

18. LCD monitor

19. Tripod socket

20. Battery/card cover

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4510

11

LCD Monitor Indicator

The indicators displayed when recording images:

1. Record mode

2. Resolution

3. Quality

4. Card indicator

5. Number of recordable image

6. Flash

7. Self-timer

8. Digital zoom

9. EV compensation

*No indication: 0 EV

10. White balance

*No indication: Auto

11. Battery level

1. Movie mode

2. Resolution

3. Possible recording time

4. Recording state (in progress)

1

2 3

4

6

7

8

9

10

11

5

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4511

12

The indicators displayed when playing images back:

1. Playback mode

2. Resolution

3. Quality

4. Card indicator

5. File number

6. Battery level

7. Captured time

8. Captured date

1. Playback mode

2. File number

3. Movie indicator

4. Recorded time

1

2 3

4

6

7

8

5

0002

1

2

4

3

00:21

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4612

13

Getting Started

You use 2 AA size batteries (Alkaline, Ni-MH or Lithium) to power the camera.

Installing Batteries

1. Make sure the camera is turned off.

2. Slide the battery/card cover.

3. Insert the batteries, noting correct polarity (+ and -).

4. Close the battery/card cover firmly.

Note:

If you will not be using the batteries for an extended period of time, remove them from the

camera to prevent leakage or corrosion.

Never use manganese batteries.

Never use batteries of different types (together) or mix old and new batteries.

Avoid using batteries in extremely cold environments as low temperatures can shorten the

battery life and reduce camera performance.

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4613

14

Attaching the Hand Strap

To prevent accidental dropping of the camera, always use the strap.

Attach the hand strap as follows:

1. Thread the small loop of the hand strap

through the strap eyelet on the camera.

2. Pull the large loop through the small loop

until the strap is firmly secured.

Inserting an SD Memory Card

The camera comes with 8MB of internal memory, allowing you to store images and video clips

in the camera. However, you can expand the memory capacity by using an optional SD

memory card so that you can store more images and video clips.

1. Make sure the camera is turned off.

2. Open the battery/card cover.

3. Insert an SD memory card:

The front side of the memory card (printed arrow)

should face towards the front side of the camera.

If the card cannot be inserted, check the orientation.

This camera is also compatible with the MultiMediaCard .

4. Close the battery/card cover.

IM±Æª©GAT.p65 92/7/30, ¤W¤È 09:4614

15

To remove a memory card:

Make sure the camera is off. Open the battery/card cover. Press lightly on the edge of the

memory card and it will eject.

Note:

To prevent valuable data from being accidentally erased

from an SD memory card you can slide the write protect

tab (on the side of the SD memory card) to “LOCK”.

To save, edit, or erase data on an SD memory card, you

must unlock the card .

Setting the Date and Time

The date/time setting screen (on Step 5) will pop out under the two situations below:

When first turning the camera on.

When turning the power on after leaving the camera without batteries for an extended

period of time.

1. Turn the camera on by pressing the

button.

2. Toggle the button to

/ / mode.

3. Press the button.

4. SETUP MENU will be highlighted, and press the button.

5. Move to the DATE/TIME by using the

or button, and press the button.

DATE/TIME menu appears.

To select an item, press the or button.

To change the value for each option, press the or

button.

When all options are set, press the button.

16

Record Mode

Taking Pictures

Your camera is equipped with both an optical viewfinder and a 1.5" LCD monitor to compose

images. Taking images using the optical viewfinder will conserve battery power. If your

batteries are low, it is recommended that you only compose images by using the viewfinder.

Using the LCD monitor, you can compose images more accurately, but at the cost of battery

consumption. Always use the LCD monitor for macro shots, however, to avoid parallax

effects. The LCD monitor must be used when Digital Zoom is used.

Using the Viewfinder

1. Turn the camera on by pressing the button.

2. Toggle the button to the

mode.

3. Compose your shot in the viewfinder.

4. Press the shutter button.

Using the LCD Monitor

1. Turn the camera on by pressing the button.

2. Toggle the button to the

mode.

By default, the LCD monitor is on.

3. Compose your shot on the display screen.

4. Press the shutter button.

Note:

You may turn off the LCD monitor by pressing the button.

17

Note:

The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.

Using the LCD monitor for an extended period of time will decrease the number of images

you can take. To increase battery longevity, turn the LCD monitor off and use the viewfinder

instead.

Always use the LCD monitor for macro shots.

The LCD monitor must be on when Digital Zoom is to be used.

Using the Normal Mode

Normal mode is used to take images where the distance to the subject is 3.9 ft (1.2 m) or more.

Select this mode for general shooting, including portraits and scenery.

1. Toggle the button to the

mode.

2. Set the focus dial to the

position.

3. Compose the picture.

4. Press the shutter button.

Note:

For better results, we recommend that you use the Normal mode if the distance to the

subject is 2.3 ft (0.7 m) or more.

Digital Zoom Photography

By using digital zoom, images appear closer. Whereas digital zoom is a compelling feature, the

more an image is enlarged (zoomed), the more pixilated (grainier) the image will appear. To

enable the digital zoom, toggle the button.

18

1. Toggle the button to the mode.

2. Turn on the LCD monitor by pressing the button.

3. To enable the digital zoom, press the button.

You may select 2X/3X/4X by toggling the button.

Normal display 2X 3X 4X

4. Press the shutter button to capture a "zoomed" image.

Self-Timer Photography

When the self-timer is used, the camera automatically takes a picture after 10 or 2 seconds.

This allows you to get into the scene when taking group images.

1. Secure the camera to a tripod or place it on a stable surface.

2. Power on the camera, and toggle the button to the mode.

3. Press the

button.

You may select or self-timer mode by toggling the

button.

[No display]Setting off

4. Compose the scene.

5. Press the shutter button.

The self-timer function is activated.

The photograph is then taken after the preset time.

19

To cancel self-timer photography at any time, press the shutter button to disrupt the

sequence.

Note:

After an image is taken using the self-timer, the self-timer mode is turned off.

If you wish to take another image using the self-timer, repeat these steps.

Using the Macro Mode

Use the macro (close-up) mode to shoot a close-up of a subject (such as flowers or insects)

where the range is between 1.3~1.6 ft (0.4~0.5 m).

1. Toggle the button to the

mode.

2. Set the focus dial to the

position.

The

icon appears on the LCD monitor.

3. Compose the scene.

4. Press the shutter button.

To cancel macro photography at any time, set the focus dial to the position.

Note:

When shooting a close-up in macro mode, use the LCD monitor to compose your shot,

avoiding the off-center parallax phenomenon.

There is not a distinct point (subject range) at which normal mode is favored over macro

mode; take an image in both normal and macro modes and compare the results.

After a macro shot is taken, DO NOT FORGET to reset the lens to the normal position.

20

Setting the Flash

The flash is designed to function automatically when lighting conditions warrant the use of the

flash. You can take an image using a flash mode suitable to your circumstances. If you change

the flash mode, the camera will retain that setting even if the camera is turned off.

1. Toggle the button to the

mode.

2. Press the

button repeatedly until your desired flash

mode appears on the LCD monitor.

3. Compose the image and press the shutter button.

La pagina sta caricando ...

Gateway DC-T20 Manuale utente

Gateway DC-T20 Manuale utente

in altre lingue

Altri documenti