Bosch WAT24468IN/04 Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
2
Your new washing machine
You have chosen a Bosch washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■ / -
Lists are represented by a small box or
a dash.
en
3
Contents
enInstruction Manual and Installation Instructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . .7
Packaging/used appliance . . . . . . . . . 7
Tips on economical use . . . . . . . . . . . 7
5 Positioning and connecting . . . .8
Included with the appliance . . . . . . . . 8
Safety instructions. . . . . . . . . . . . . . . . 9
Installation surface . . . . . . . . . . . . . . 10
Installation on a base
or a wooden joist floor . . . . . . . . . . . 10
Installation on a platform
with drawer . . . . . . . . . . . . . . . . . . . . 10
Installing the appliance
in a kitchenette . . . . . . . . . . . . . . . . . 10
Removing the transport locks . . . . . . 10
Hose and cable lengths . . . . . . . . . . 11
Water inlet. . . . . . . . . . . . . . . . . . . . . 12
Water outlet . . . . . . . . . . . . . . . . . . . 13
Levelling . . . . . . . . . . . . . . . . . . . . . . 13
Electrical connection. . . . . . . . . . . . . 14
Before washing for the first time . . . . 15
Transportation. . . . . . . . . . . . . . . . . . 16
* Getting to know
the appliance . . . . . . . . . . . . . . .17
Washing machine . . . . . . . . . . . . . . . 17
Control panel . . . . . . . . . . . . . . . . . . 18
Display panel . . . . . . . . . . . . . . . . . . 18
Z Laundry. . . . . . . . . . . . . . . . . . . .20
Prepare the laundry . . . . . . . . . . . . . 20
Sorting laundry . . . . . . . . . . . . . . . . . 20
Starching . . . . . . . . . . . . . . . . . . . . . 20
Dyeing/bleaching . . . . . . . . . . . . . . . 21
Soaking . . . . . . . . . . . . . . . . . . . . . . 21
C Detergent . . . . . . . . . . . . . . . . . . 21
Correct selection of detergent . . . . . .21
Saving energy and detergent . . . . . .22
0 Programme default
settings. . . . . . . . . . . . . . . . . . . . 22
Temperature . . . . . . . . . . . . . . . . . . .22
Spin speed . . . . . . . . . . . . . . . . . . . .22
Finished in-time . . . . . . . . . . . . . . . . .23
\ Additional programme
settings. . . . . . . . . . . . . . . . . . . . 24
Speed Eco. . . . . . . . . . . . . . . . . . . . .24
Easy-Iron . . . . . . . . . . . . . . . . . . . . . .24
Prewash . . . . . . . . . . . . . . . . . . . . . .24
Water Plus . . . . . . . . . . . . . . . . . . . . .24
Rinse Plus . . . . . . . . . . . . . . . . . . . . .24
Anti tangle . . . . . . . . . . . . . . . . . . . . .24
1 Operating the appliance . . . . . . 25
Preparing the washing machine . . . .25
Select programme/switch
on the appliance . . . . . . . . . . . . . . . .25
Change the programme
default settings . . . . . . . . . . . . . . . . .25
Select additional programme
settings . . . . . . . . . . . . . . . . . . . . . . .25
Placing laundry into the drum . . . . . .26
Measure and add detergent
and care products . . . . . . . . . . . . . . .26
Starting the programme . . . . . . . . . .27
Childlock . . . . . . . . . . . . . . . . . . . . .28
Adding/removing laundry . . . . . . . . .28
Changing the programme . . . . . . . . .28
Cancel the programme . . . . . . . . . . .28
Programme end during rinse hold. . .29
Programme end . . . . . . . . . . . . . . . .29
Removing laundry/switching
off the appliance . . . . . . . . . . . . . . . .29
en Intended use
4
H Sensors . . . . . . . . . . . . . . . . . . . 30
Automatic load sensing . . . . . . . . . . 30
Unbalanced load detection system . 30
VoltCheck . . . . . . . . . . . . . . . . . . . . 30
M Setting the signal . . . . . . . . . . . 31
2 Cleaning and maintenance . . . 31
Machine housing/control panel . . . . 31
Drum . . . . . . . . . . . . . . . . . . . . . . . . 31
Descaling. . . . . . . . . . . . . . . . . . . . . 32
Detergent drawer and housing . . . . 32
Detergent solution pump blocked . . 32
The drain hose at the siphon i
s blocked. . . . . . . . . . . . . . . . . . . . . 33
Filter in the water
supply is blocked. . . . . . . . . . . . . . . 33
3 Faults and what to
do about them . . . . . . . . . . . . . 34
Emergency release . . . . . . . . . . . . . 34
Information on the display panel . . . 35
Faults and what to do about them . . 36
4 After-sales service . . . . . . . . . . 39
J Technical data. . . . . . . . . . . . . . 39
8 Intended use
Intended use
■ This appliance is intended for private
domestic use only.
■ Do not install or operate this
appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.
■ Do not install the machine in a damp
area or bathroom with exposure to a
direct shower.
■ Protect the machine from direct
sunlight and rain.
■ This appliance must only be used for
washing domestic laundry,
consisting of machine-washable
items and hand-washable woollens
(see label on item). Using the
appliance for any other purpose is
outside of the scope of its intended
application and is forbidden.
■ This appliance is suitable for
operation with mains water and
commercially available detergents
and care products (must be suitable
for use in washing machines).
■ This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Read and follow the operating and
installation instructions and all other
information provided with this appliance.
Retain the documents for subsequent
use or for subsequent owners.
Safety instructions en
5
( Safety instructions
Safety instructi ons
Electrical safety
:Warning
Risk of death!
There is a risk of electric shock
if you touch live components.
■ Never touch or hold the
mains plug with wet hands.
■ Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
■ The appliance must be
grounded.
Electrical connection
~ Page 14
Risk of injury
:Warning
Risk of injury!
■ When the washing machine
is lifted by its protruding
parts (e.g. the washing
machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■ If you climb on the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■ If you lean on the washing
machine door when it is
open, the washing machine
may tip over and cause
injuries.
Do not lean on the washing
machine door when it is
open.
■ Reaching into the drum
when it is turning can cause
injuries to hands.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot water e.g. if hot
water is being drained into a
wash basin.
Do not reach into the hot
detergent solution.
Safety for children
:Warning
Danger of death!
If children play with the washing
machine, they may get into life-
threatening situations or injure
themselves.
■ Do not leave children
unattended near the washing
machine.
■ Do not let children play with
the washing machine.
en Safety instructions
6
:Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■ Disconnect the mains plug.
■ Cut through the mains cable
and remove it, along with
plug.
■ Destroy the lock on the
washing machine door.
:Warning
Risk of suffocation!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When you wash at high
temperatures, the glass in the
washing machine door gets
hot.
Do not let children touch the
hot washing machine door.
Environmental protection en
7
7 Environmental
protection
Environmental protection
Packaging/used appliance
Do’s
■ Hand over the old/discarded
electronic equipment only to
authorized collection centers for
disposal
www.bosch-home.com/in/about-
bosch/responsibility.html
See also:
■ Consult the authorized service
center as to whether the Electronic
Equipment can be repaired or not,
before discarding
■ Consult the retailer about appliance
take back schemes
Don’ts
■ Don’t dump the discarded Electronic
Equipment in the open or in any land
fill site, as this will result in
contamination of the soil and the
ground water
■ Don’t dispose of the discarded
Electronic Equipment in household
bins or Municipal bins
■ The product is not meant for re-sale
to any unauthorized agencies/scrap
dealers
■ Don't keep any replaced spare
part(s) from the product in an
exposed area
Tips on economical use
■ Fill the appliance with the maximum
amount of laundry for each
programme to save energy and
water to an optimum.
Overview of programmes
~ Supplementary sheet for the
operating and installation
instructions.
■ Wash normally soiled laundry
without a prewash.
■ Save energy and detergent when
washing lightly and normally soiled
laundry.
~ "Detergent" on page 21
■ The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
)
Dispose of packaging in an
environmentally-responsible
manner.
This appliance is certified in
accordance with the guidelines
on E-waste (Management )
Rules 2016 which govern
waste electrical and electronic
equipment. The guidelines
provide a framework for the
return and recycling of used
appliances.
Note: This product doesn't
contain any of hazardous
substances as specified in the
E-waste (Management) Rules
2016.
Contact No: 180042535287 (toll-free)
E-mail: [email protected]
Online
website:
www.ewasteindia.com
en Positioning and connecting
8
■ Information about the energy
consumption
*
:
The display provides information
about the relative energy
consumption in the selected
program.
The more indicator lights light up,
the higher the program's
consumption.
This enables you to compare the
consumption levels of the different
programs when choosing your
program settings and to decide on
an energy- and water-saving
program setting for the selected
program.
■ Energy-saving mode: The display
panel lighting goes out after a few
minutes and the start button flashes.
To activate the lighting, press any
button.
Energy-saving mode is not activated
if a programme is running.
■ If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
5 Positioning and
connecting
Positioning and connecti ng
Included with the appliance
Note: Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
* depending on the model
3+
#
Positioning and connecting en
9
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for levelling
■ Wrench with:
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
Safety instructions
:Warning
Risk of injury!
■ The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■ When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■ If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■ In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■ If in doubt, have the appliance
connected by a specialist.
( Mains cable
0 Bag:
■ Installation and operating
instructions
■ After-sales service location
directory*
■ Warranty*
■ Cover caps for openings left
after removing the transport
locks
■ Wrench*
8 Water drain hose
@ Elbow for securing the water drain
hose*
H Water supply hose on standard/
Aqua-Secure models
P Water filter*
*depending on the model
en Positioning and connecting
10
Installation surface
Note: The washing machine must be
aligned in a stable manner so that it
does not move around.
■ The installation surface must be firm
and level.
■ Soft floors/floor coverings are not
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 975600,
CZ 110600, Z 7080X0.
Note: On wooden joist floors, install the
washing machine:
■ In a corner, if possible,
■ On a water-resistant wooden board
(min. 30 mm thick) which is screwed
tightly to the floor.
Installation on a platform with
drawer
*
Platform order no.: WMZ 20490, WZ
20490, WZ 20510, WZ 20520
Installing the appliance in a
kitchenette
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
■ Recess width of 60 cm required.
■ Only install the washing machine
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
■ The machine is secured for
transportation using transport locks.
If the transport locks are not
removed, the machine may become
damaged when it is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
■ To prevent transport damage from
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Note: Keep the screws and sleeves in
a safe place.
* Depending on the model
Positioning and connecting en
11
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Hose and cable lengths
■ Left-hand connection
■ Right-hand connection
* depending on model
Tip: The following are available from
specialist dealers/the after-sales
service:
■ An extension for Aqua-Stop or cold
water supply hose (approx. 2.50 m);
order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
■ A longer supply hose (approx.
2.20 m) for standard model
aFP
PD[FP
aFP
aFP
PD[FP
aFP
aFP
aFP
en Positioning and connecting
12
Water inlet
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Observe the following when connecting
the machine:
Notes
■ Only operate the washing machine
using cold mains water.
■ Do not connect the machine to the
mixer tap of an unpressurised hot-
water boiler.
■ Do not use a used supply hose. Only
use the supply hose supplied with
the machine or one that was
purchased from an authorised
retailer.
■ Do not bend, squash, modify or cut
through the water supply hose
(otherwise its strength is no longer
guaranteed).
■ Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may be
damaged.
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
1. Connect the water supply hose to
the water tap (¾" = 26.4 mm) and to
the appliance:
– Model: Standard
– Model: AquaSecure
Tip: Connect also an external water
filter between water supply hose and
tap. The filter filters dirt particles out
of the water.
Water filter must be cleaned regularly
to remove contaminants. This will
prevent blockages. See also ~
separate installation and cleaning
instruction for water filter.
2. Open the water tap carefully,
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Positioning and connecting en
13
Water outlet
Caution!
Water damage
When water is being pumped away, the
outlet hose is under water pressure and
may slip out of the wash basin or
connection point.
Secure the outlet hose so that it cannot
slip out.
Note: Do not kink the water drain hose
or put strain on it lengthways.
You can lay the water drain hose as
follows:
■ Outlet in a sink
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into contact
with hot water e.g. if hot water is
being drained into a wash basin.
Do not reach into the hot water.
Caution!
Damage to the appliance/fabrics
If the end of the drain hose is
immersed in the drained water, water
may be sucked back into the
appliance and may damage the
appliance/fabrics.
Make sure that:
– The plug does not block drainage
from the sink.
– The end of the drain hose is not
immersed in the drained water.
– The water drains away quickly
enough.
Secure the outlet hose so that it
cannot slip out.
Elbow available from after-sales
service:
Individual part number 00655300
■ Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24-40 mm (available
from specialist dealers).
■ Outlet into a plastic pipe with
rubber bushing or into a drainage
pit
Levelling
Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
1. Loosen the lock nuts using a
wrench, by turning it in a clockwise
direction.
2. Check the alignment of the washing
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
en Positioning and connecting
14
3. Tighten the lock nut against the
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.
Electrical connection
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
■ Never touch or hold the mains plug
with wet hands.
■ Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
■ Never unplug the mains plug during
operation.
Observe the following information and
ensure that:
Notes
■ The mains voltage and voltage
indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.
■ The mains plug fits the socket.
■ The cable cross-section is adequate.
■ The mains cable is only replaced by
a qualified electrician (if this is
necessary). Replacement mains
cables are available from the after-
sales service.
■ No multiple plugs/couplings or
extension cables are used.
■ If an earth-leakage circuit breaker is
used, only a type which displays this
symbol is used: z.
Only this symbol guarantees
compliance with the currently
applicable regulations.
■ The mains plug can be accessed at
all times.
■ The mains cable is not bent,
squashed, modified, cut through, or
in contact with heat sources.
Grounding Instructions
:Warning
Danger of death!
Improper connection of the ground may
result in electric shock. Have the
appliance checked by a qualified
technician or licensed electrician if you
are in doubt as to whether the washing
machine has been properly grounded.
This appliance must be grounded. In the
event of malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for the electric current. This
appliance is equipped with a cord that
has an equipment grounding conductor
and a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with local codes and
ordinances. To ground the appliance
use a 3 pin plug and properly grounded
socket of 16 A rating.
Positioning and connecting en
15
Notes
■ Do not modify the plug provided with
the appliance. If the plug will not fit
into outlet have a properly grounded
outlet installed by qualified
electrician. Do not cut, remove or
bypass the grounding prong on the
washing machine power cord plug.
■ The wiring for the eletrical outlet
circuit must be sufficient to meet the
appliance requirements. Use of
Ground Fault Circuit Interrupter
(GFCI) is recommended.
■ Do not use the machine with an
extension box, extension cord, spike
busters etc., as this may lead to
improper grounding conditions.
Before washing for the first
time
The washing machine was thoroughly
tested before leaving the factory. To
remove any residues from the
production and to remove water that
may be left over from the test, run the
first wash cycle without any laundry.
Notes
■ The washing machine must be
correctly installed and connected.
~ Page 8
■ Never use a damaged machine.
Inform customer services.
1. Check the machine.
2. Remove the protective foil from the
work top and the control panel.
3. Connect the mains plug.
4. Turn on the tap.
5. Close the door (do not load any
laundry).
6. Depending on the model, select ¾
Drum Clean 90 °C or i
Cottons 90 °C program.
7. Open the detergent drawer.
8. Pour approximately 1 litre of water
into compartment II.
9. Pour standard detergent into
compartment II.
Note: To prevent foaming, only use
half the amount of detergent
recommended by the detergent
manufacturer. Do not use detergent
designed for wool or delicates.
10.Close the detergent drawer.
11.Press the A button.
12.When the program ends, switch off
the appliance.
Your washing machine is now ready to
use.
en Positioning and connecting
16
Transportation
e.g. when moving home
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the
supply hose.
Maintenance – filter in the water
supply ~ Page 33
3. Disconnect the washing machine
from the main plug.
4. Drain the remaining detergent
solution.
Maintenance – detergent solution
pump blocked ~ Page 32
5. Remove the hoses.
Installing the transport locks:
1. Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2. Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before switching on the appliance
again:
Notes
■ The transport locks must be
removed. ~ "Removing the
transport locks" on page 10
■ To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour approx. 1 litre of
water into compartment II and start
the 0 Spin/Drain [//0 Spin/Empty
[ program.
Getting to know the appliance en
17
* Getting to know the appliance
Getti ng to know the appliance
Washing machine
#
6 7
( Detergent drawer
0 Controls/display elements
8 Washing machine door with
integrated window handle
9S Open the washing machine door
9T Close the door
@ Service flap
en Getting to know the appliance
18
Control panel
Control panel depending on the model
Note: The buttons are sensitive, they
only need to be touched gently.
Display panel
( Programmes ~ Supplementary
sheet for the operating and
installation instructions.
0 Programme selector
8 Display panel for settings and
information
#
+
Button Display indicator Description
( selectable Temperature**
' - 90 °C in °C;
0 selectable Spin speed
- - - -, 0 - 1400** 0 in rpm; 0 = no spin cycle, draining only;
- - - - = Rinse Stop
8 Finished in-time/Ready in-time/Finish in-time*
* depending on the model
** depending on the selected program, settings and model
Getting to know the appliance en
19
More information on the display panel
e.g. 2:30 Program duration depends on the program selection in h:min
(hours:minutes)
1 - 24 ñ End time preselection in hours
End of program after ... hours
@ Additional program settings: ~ Page 24
(G) ** Speed EcoPerfect
(Q)** Easy-Iron/Less-Iron*
(T)** Prewash*
(Z, Water+)** Water Plus/Anti tangle*
(', Rinse+) Rinse Plus*
H A Button for starting a program, Interrupting a program, e.g. to add
items of laundry or cancelling a program
Button Display indicator Description
* depending on the model
** depending on the selected program, settings and model
Display in-
dicator
Description
8** kg Load recommendation
é { { ... Energy consumption*
Program progress:
ß Washing
à Rinse
0 Spin
End Program end
- - - - 0 Program end during Rinse Stop
è Washing machine door
r Tap
~ "Information on the display
panel" on page 35
* depending on the model
** depending on the selected program, settings
and model
E Childproof lock ~ "Childlock"
on page 28
Å
¾
Foam detection
Indicator lamp for Drum Clean
programme*
E: - - Fault display
0 - 4 Signal setting
Display in-
dicator
Description
* depending on the model
** depending on the selected program, settings
and model
en Laundry
20
Z Laundry
Laundry
Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips,
needles, nails) may damage the laundry
or components in the washing machine.
Therefore, note the following tips when
preparing your laundry:
■ Empty pockets.
■ Look out for metal items (paperclips,
etc.) and remove them.
■ Wash delicates in a laundry bag
(tights, underwired bras, etc.).
■ Close any zips, button up any cover
buttons.
■ Brush sand out of pockets and
collars.
■ Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels:
■ Type of fabric/fibre
■ Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured laundry separately.
Wash new bright fabrics separately
the first time you wash them.
■ Soiling
Wash laundry with the same level of
soiling together.
You can find examples of levels of
soiling on ~ Page 22
– Light: Do not prewash, select the
(Speed Perfect) G setting if
necessary
– Normal
– Heavy: Load less laundry, select
a programme with prewash
– Stains: Remove/pretreat stains
while they are fresh. First, dab the
stain with soapy water/do not
rub. Then wash the items of
laundry with the appropriate
programme. Stubborn/dried-in
stains can sometimes only be
removed with several washes.
■ Symbols on the care labels
The numbers in the symbols indicate
the maximum washing temperature
which may be used.
– M: Suitable for a normal
washing process; e.g. Cottons
programme
– U : A gentle washing process is
required; e.g. Easy-Care
programme
– V : An especially gentle washing
process is required; e.g.
Delicate/Silk programme
– W : Suitable for washing by
hand; e.g. Wool programme
– Ž : Do not wash the laundry in
the machine.
Starching
Note: Laundry must not be treated with
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Starching with liquid starch is possible
in programs such as Rinse and Cottons
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
Bosch WAT24468IN/04 Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
in altre lingue
Documenti correlati
-
Bosch WAJ2006WIN/09 Guida d'installazione
-
Bosch WAT28370GB WMACHINE Manuale utente
-
-
-
-
-
Bosch Washer-dryer Guida d'installazione
-
-
Bosch WAN28267II/28 Istruzioni per l'uso
-