HOTPOINT/ARISTON ENBLH 19363 FW Guida utente

Categoria
Frigo-congelatori
Tipo
Guida utente
Italiano
Istruzioni per l’uso
COMBINATO FRIGORIFERO/CONGELATORE
Contents
Operating Instructions, 1
Assistance, 3
Description of the appliance, 4
Description of the appliance, 5
Reversible Doors, 6
Installation, 11
Start-up and use, 11
Maintenance and care, 12
Precautions and tips, 13
Troubleshooting, 14
Sommario
Istruzioni per l’uso, 1
Assistenza, 3
Descrizione dell’apparecchio, 4
Descrizione dell’apparecchio, 5
Reversibilità apertura porte, 6
Installazione, 7
Avvio e utilizzo, 7
Manutenzione e cura, 8
Precauzioni e consigli, 9
Anomalie e rimedi, 10
English
Operating Instructions
REFRIGERATOR/FREEZER COMBINATION
ENBLH 19xxx F
ENBLH 19xxx FW
3
Assistenza
Prima di contattare l’Assistenza:
Verificare se l’anomalia può essere risolta autonomamente
(vedi Anomalie e Rimedi).
In caso negativo, contattare il Numero Unico Nazionale
199.199.199.
Comunicare:
il tipo di anomalia
il modello della macchina (Mod.)
il numero di serie (S/N)
Queste informazioni si trovano sulla targhetta caratteristiche posta
nel vano frigorifero in basso a sinistra.
Non ricorrete mai a tecnici non autorizzati e riutate sempre
l’installazione di pezzi di ricambio non originali.
Assistance
Before calling for Assistance:
Check if the malfunction can be solved on your own (see
Troubleshooting).
If after all the checks, the appliance still does not operate or
the problem persists, call the nearest Service Centre
Communicating:
type of malfunction
appliance model (Mod.)
serial number (S/N)
This information can be found on the data plate located on the
bottom left side of the refrigerator compartment.
Never call on unauthorized technicians and always refuse
spare parts which are not originals.
- modello
- model
- numero di serie
- serial number
4
Descrizionedell’apparecchio
Pannello di controllo
1 Pulsante FUNZIONAMENTO CONGELATORE per regolare la
temperatura del vano congelatore. Il pulsante è utilizzato con
SUPER FREEZE per accendere/spegnere il prodotto premere
entrambi per 3 secondi.
2 Pulsante SUPER FREEZE (congelamento rapido) per
congelare gli alimenti freschi.Premere il tasto per 3 secondi
per accendere il prodotto, mentre è spento.
3 Spia blu SUPER FREEZE (congelamento rapido): si accende
quando viene premuto il tasto SUPER FREEZE.
4 Spia gialla TEMPERATURA FREEZER La temperatura del
congelatore è costituita da 4 livelli come indicato sulla serigrafia.
5 Spia gialla TEMPERATURA FRIGORIFERO La temperatura del
frigorifero è costituita da 4 livelli come indicato sulla serigrafia.
6 Spia blu SUPER COOL: si accende quando viene premuto il
tasto SUPER COOL.
7 Tasto SUPER COOL (raffreddamento rapido) per abbassare
velocemente la temperatura del vano frigorifero.
8 Pulsante FUNZIONAMENTO FRIGORIFERO per regolare la
temperatura del vano frigorifero.
! Le spie servono anche per segnalare un anomalo aumento di
temperatura nel vano congelatore (vedi Anomalie e rimedi).
!The indicator lights are also used to indicate an unusual
temperature increase in the freezer compartment (see
Troubleshooting).
Description of the appliance
Control panel
1 FREEZER OPERATION Button to regulate the temperature the
freezer compartment. Button is used with SUPER FREEZE
Button to switch on/switch off the product by pressing both
3 seconds
2 SUPER FREEZE Button (rapid freezing) to freeze fresh food.
Press button for 3 seconds to switch on the product while it
is switched off
3 SUPER FREEZE Blue light illuminates when SUPER FREEZE
button is pressed.
4 FREEZER TEMPERATURE Yellow light The temperature of the
Freezer is consisted with 4 levels as indicated on serigraphy
5 FRIDGE TEMPERATURE Yellow light The temperature of the
Fridge is consisted with 4 levels as indicated on serigraphy
6 SUPER COOL Blue light illuminates when SUPER COOL
button is pressed.
7 SUPER COOL Button (quick cool) to lower the temperature of
the refrigerator compartment rapidly.
8 REFRIGERATOR OPERATION button to regulate the
temperature of the refrigerator compartment.
2
4
5
3
7
8
26 22 20 18
SUPER
FREEZE
SUPER
COOL
2468
°C
°C
1
6
5
Descrizionedell’apparecchio
Vista d’insieme
Le istruzioni sull’uso valgono per diversi modelli per cui è
possibile che la figura presenti particolari differenti rispetto a
quelli dell’apparecchio acquistato. La descrizione degli oggetti
più complessi si trova nelle pagine seguenti.
1 PIEDINO di regolazione.
2 Vano CONGELAMENTO e CONSERVAZIONE
3 Balconcino BOTTIGLIE
*.
4 Food Care Zone / Food Care Zone 0°C / Safe Defrost*
5 Cassetto FRUTTA e VERDURA
*
6 Balconcino estraibile PORTAOGGETTI *
7 Pannello di controllo.
8 WINE RACK*
* Variabili per numero e/o per posizione, presente solo in alcuni
modelli.
Description of the appliance
Overall view
The instructions contained in this manual are applicable to different
model refrigerators. The diagrams may not directly represent the
appliance purchased. For more complex features, consult the
following pages.
1 Levelling FEET
2 FREEZER and STORAGE compartment
3 BOTTLE shelf
*
4 Food Care Zone / Food Care Zone 0°C / Safe Defrost*
5 FRUIT and VEGETABLE bin
*
6 Removable multipurpose SHELVES*
7 Control panel.
8 WINE RACK*
* Varies by number and/or position, available only on certain
models.
7
85
4
2
1
6
3
6
Reversibilità apertura porte
Nel caso sia necessario cambiare il verso di apertura delle porte,
rivolgersi al servizio di Assistenza Tecnica.
Reversible doors
If it is necessary to change the direction in which the doors open,
please contact the Technical Assistance Centre.
IT
7
Installazione
! È importante conservare questo libretto per poterlo consultare
in ogni momento. In caso di vendita, di cessione o di trasloco,
assicurarsi che resti insieme all’apparecchio per informare il nuovo
proprietario sul funzionamento e sui relativi avvertimenti.
! Leggere attentamente le istruzioni: ci sono importanti informazioni
sull’installazione, sull’uso e sulla sicurezza.
Posizionamento e collegamento
Posizionamento
1. Posizionare l’apparecchio in un ambiente ben aerato e non
umido.
2. Non ostruire le griglie posteriori di ventilazione: compressore
e condensatore emettono calore e richiedono una buona
aerazione per funzionare bene e contenere i consumi elettrici.
3. Lasciare una distanza di almeno 10 cm tra la parte superiore
dell’apparecchio ed eventuali mobili sovrastanti e di almeno
5 cm tra le fiancate e mobili/pareti laterali.
4. Lasciare l’apparecchio lontano da fonti di calore (la luce solare
diretta, una cucina elettrica).
5. Per mantenere una ottimale distanza del prodotto dalla parete
posteriore, montare i distanzieri presenti nel kit di installazione
seguendo le istruzioni presenti sul foglio dedicato.
Livellamento
1. Installare l’apparecchio su un pavimento piano e rigido.
2. Se il pavimento non fosse perfettamente orizzontale,
compensare svitando o avvitando i piedini anteriori.
Collegamento elettrico
Dopo il trasporto, posizionare l’apparecchio verticalmente e
attendere almeno 3 ore prima di collegarlo all’impianto elettrico.
Prima di inserire la spina nella presa della corrente, accertarsi che:
la presa abbia la messa a terra e sia a norma di legge;
la presa sia in grado di sopportare il carico massimo di potenza
della macchina, indicato nella targhetta caratteristiche posta
nel vano frigorifero in basso a sinistra (es 150 W);
la tensione di alimentazione sia compresa nei valori indicati nella
targhetta caratteristiche, posta in basso a sinistra (es 220-240
V);
la presa sia compatibile con la spina dell’apparecchio.
In caso contrario richiedere la sostituzione della spina a un
tecnico autorizzato (vedi Assistenza); non usare prolunghe e
multiple.
! Ad apparecchio installato, il cavo elettrico e la presa della
corrente devono essere facilmente raggiungibili.
! Il cavo non deve subire piegature o compressioni.
! Il cavo deve essere controllato periodicamente e sostituito solo
da tecnici autorizzati (vedi Assistenza).
! Líazienda declina ogni responsabilit‡ qualora queste
norme non vengano rispettate.
Avvio e utilizzo
Avviare líapparecchio
! Prima di avviare líapparecchio, seguire le istruzioni
sullíinstallazione (vedi Installazione).
! Prima di collegare l’apparecchio pulire bene i vani e gli accessori
con acqua tiepida e bicarbonato.
! L’apparecchio è provvisto di un controllo salvamotore che fa
avviare il compressore solo dopo circa 8 minuti dall’accensione.
Questo accade anche dopo ogni interruzione dell’alimentazione
elettrica, volontaria o involontaria (black out).
1 Inserire la spina nella presa ed accendere il prodotto tramite
l’apposito pulsante, accertarsi che si accenda la spia gialla
TEMPERATURA FREEZER e TEMPERATURA FRIGORIFERO.
2 Dopo qualche ora sarà possibile inserire alimenti nel frigorifero.
3 Premere il tasto SUPER FREEZE (congelamento rapido): si
accenderà la spia blu SUPER FREEZE. Essa si spegnerà
quando il congelatore avrà raggiunto la temperatura ottimale:
a quel punto sarà possibile inserire gli alimenti
Sistema di raffreddamento
No Frost
È riconoscibile dalla presenza di celle d’aerazione poste sulle pareti
posteriori dei vani.
Il No Frost gestisce un flusso continuo di aria fredda che raccoglie
l’umidità e impedisce la formazione di ghiaccio e brina: nel vano
frigorifero mantiene il giusto livello di umidità e, grazie all’assenza di
brina, preserva le qualità originarie degli alimenti; nel vano congelatore
evita la formazione di ghiaccio rendendo superflue le operazioni di
sbrinamento ed evitando che gli alimenti si attacchino tra loro.
Non mettere alimenti o contenitori in prossimità della parete
refrigerante posteriore, per non ostruire i fori di aerazione e facilitare
la formazione di condensa.Chiudere le bottiglie e avvolgere gli
alimenti.
Utilizzare al meglio il frigorifero
Per regolare la temperatura utilizzare il pulsante
FUNZIONAMENTO FRIGORIFERO (vedi Descrizione).
• Premere il tasto SUPER COOL (raffreddamento rapido) per
abbassare la temperatura in poco tempo, per esempio quando
il vano viene riempito dopo una grossa spesa. La funzione si
disattiva automaticamente trascorso il tempo necessario.
Inserire soltanto alimenti freddi o appena tiepidi, non caldi (vedi
Precauzioni e consigli).
• Ricordarsi che gli alimenti cotti non si mantengono più a lungo
di quelli crudi.
Non inserire liquidi in recipienti scoperti: provocherebbero un
aumento di umidità con conseguente formazione di condensa.
RIPIANI:
Sono estraibili e regolabili in altezza grazie alle apposite guide ,
per l’inserimento di contenitori o alimenti di notevole dimensione.
Indicatore TEMPERATURA*: per individuare la zona più fredda
del frigorifero.
1. Controllare che sull’indicatore risulti ben evidente OK (vedi
figura).
2. Se non compare la scritta OK significa che la temperatura
è troppo elevata: impostare una temperatura più fredda e
attendere circa 10 h finché la temperatura si sia stabilizzata.
8
IT
3. Controllare nuovamente l’indicatore: se necessario, procedere
con una nuova regolazione. Se si sono introdotte grosse
quantità di alimenti o si è aperta frequentemente la porta del
frigorifero, è normale che l’indicatore non segni OK. Attendere
almeno 10 h prima di regolare la manopola FUNZIONAMENTO
FRIGORIFERO su una posizione più alta.
Cassetto FRUTTA e VERDURA
*
I cassetti frutta e verdura di cui è dotato il frigorifero sono
appositamente progettati allo scopo di mantenere fresche e
fragranti la frutta e le verdure. Aprire il regolatore d’umidità
(posizione B)
se si desidera conservare gli alimenti, come la frutta, in un
ambiente con poca umidità, o chiudere (posizione A) se si vuole
conservare del cibo, come la verdura, in un ambiente con molta
umidità.
A
B
A
B
Easy Ice *
La doppia bacinella è stata progettata per ottimizzare lo spazio nel
cassetto freezer e rendere disponibile il ghiaccio in modo rapido
e semplice. Le bacinelle possono essere impilate o riempite ed
utilizzate separatamente.
Inoltre l’apposito aggancio rende l’Easy Ice una soluzione
estremamente flessibile, in quanto è possibile posizionarla nella
parte destra o sinistra dei primi cassetti.
Food Care Zone *
Zona dedicata alla conservazione di alimenti freschi quali carne e
pesce. Grazie alla bassa temperatura all’interno dello scomparto,
la Food Care Zone consente di allungare i tempi di conservazione
fino ad una settimana.
Food Care Zone 0°C / Safe Defrost*
Un vano progettato per mantenere la freschezza di cibi delicati
come carne e pesce. Grazie alla bassa temperatura del vano
(-2 / +3° C) gli alimenti possono essere conservati fino a una
settimana (test effettuato su prodotti carnei) mantenendo inalterati
componenti nutrizionali, aspetto e aroma.
Questo vano è inoltre particolarmente indicato per scongelare
i cibi in modo salutare, in quanto, lo scongelamento a bassa
temperatura inibisce la proliferazione di microrganismi,
preservando il gusto e le proprietà organolettiche del cibo.
Non è adatto per frutta, verdura e insalate, ma può essere adatto
per: latte e latticini freschi o freschissimi, pasta fresca, pasta fresca
ripiena (volendo anche i cibi cotti o gli avanzi).
Utilizzare al meglio il congelatore
Per regolare la temperatura utilizzare il pulsante
FUNZIONAMENTO CONGELATORE (vedi Descrizione).
Non ricongelare alimenti che stanno per scongelare o
scongelati; tali alimenti devono essere cotti per essere
consumati (entro 24 ore).
Gli alimenti freschi da congelare non devono essere posti a
contatto con quelli già congelati.
Non mettere nel congelatore bottiglie di vetro contenenti liquidi,
tappate o chiuse ermeticamente, perché potrebbero rompersi.
La quantità massima giornaliera di alimenti da congelare è
indicata sulla targhetta caratteristiche, posta nel vano frigorifero
in basso a sinistra (esempio: Kg/24h 4).
• Per congelare (se il congelatore è già in funzione): premere il
tasto di congelamento rapido SUPER FREEZE (si accenderà
la
corrispondente spia blu), inserire il cibo e chiudere la porta.La
funzione si disattiva automaticamente dopo 24 ore o quando
le temperature ottimali sono state raggiunte (la spia si spegne)
! Non riporre cibi troppo voluminosi nella parte del cassetto freezer
superiore occupata dall’ Ice Device ove presente.
! Durante il congelamento evitare di aprire la porta.
! In caso di interruzione di corrente o di guasto, non aprire la
porta del congelatore: in questo modo congelati e surgelati si
conserveranno senza alterazioni per circa 9-14 ore.
Manutenzione e cura
Escludere la corrente elettrica
Durante i lavori di pulizia e manutenzione è necessario isolare
l’apparecchio dalla rete di alimentazione:
1. Premere il pulsante FUZIONAMENTO CONGELATORE e
SUPER FREEZER per 3 secondi per spegnere il prodotto
2. staccare la spina dalla presa.
! Se non si segue questa procedura può scattare l’allarme: esso
non è sintomo di anomalia.
Per ripristinare il normale funzionamento reinserire la spina,
premere i pulsanti FUNZIONAMENTO CONGELATORE e
SUPER FREEZE ed impostare il FUNZIONAMENTO CONGELA-
TORE sul valore desiderato.
Funzione I Care
La funzione I Care può essere attivata per ottimizzare i
consumi energetici. Questa funzione si attiva tenendo premuto
contemporaneamente per almeno 6 secondi il tasto SUPER COOL
e il tasto funzionamento frigorifero.
All’attivazione della funzione si accenderanno 4 spie per 2
secondi: spia SUPER COOL, spia SUPER FREEZE e due spie
di temperature, una per il frigorifero ed una per il congelatore.
Dopo 5 secondi l’interfaccia entra in modalità risparmio energetico
e le spie si spengono. L’interfaccia resta spenta anche all’apertura
della porta. È sufficiente premere un qualsiasi pulsante per
riaccenderla. E’ possibile modificare la temperatura attraverso
la pressione dei tasti di regolazione.
L’ottimizzazione dei consumi avverrà dopo 48h dall’attivazione
della funzione. Per disattivare la funzione I Care, spegnere il
prodotto (Vedi descrizione). Il prodotto può essere nuovamente
acceso per il normale funzionamento.
In ambienti umidi, con la funzione I Care attivata, potrebbe
presentarsi una lieve formazione di condensa sulle porte;
disattivando la funzione, si ristabiliscono comunque le condizioni
standard del prodotto.
* Variabili per numero e/o per posizione, presente solo in alcuni
modelli.
IT
9
Pulire l’apparecchio
Le parti esterne, le parti interne e le guarnizioni in gomma
possono essere pulite con una spugnetta imbevuta di acqua
tiepida e bicarbonato di sodio o sapone neutro. Non usare
solventi, abrasivi, candeggina o ammoniaca.
Gli accessori estraibili possono essere messi a bagno in acqua
calda e sapone o detersivo per piatti. Sciacquarli e asciugarli
con cura.
Il retro dell’apparecchio tende a coprirsi di polvere, che può
essere eliminata utilizzando con delicatezza, dopo aver spento
l’apparecchio e staccato la presa di corrente, la bocchetta lunga
dell’aspirapolvere, impostato su una potenza media.
Evitare muffe e cattivi odori
L’apparecchio è fabbricato con materiali igienici che non
trasmettono odori. Per mantenere questa caratteristica è
necessario che i cibi vengano sempre protetti e chiusi bene.
Ciò eviterà anche la formazione di macchie.
Nel caso si voglia spegnere l’apparecchio per un lungo
periodo, pulire l’interno e lasciare le porte aperte
Sostituire la led*
La nuova illuminazione a led, grazie alla potente luce diffusa,
permette una chiara visione di ogni alimento senza alcuna zona
d’ombra. Nel caso sia necessario sostituire il led, rivolgersi al
servizio Assistenza Tecnica
Sostituire la lampadina *
Per sostituire la lampadina di illuminazione del vano frigorifero,
staccare la spina dalla presa di corrente. Seguire le istruzioni
riportate qui sotto. Accedere alla lampada togliendo la protezione
come indicato in figura. Sostituirla con una di potenza analoga a
quella indicata sulla protezione.
Precauzioni e consigli
! L’apparecchio è stato progettato e costruito in conformità alle
norme internazionali di sicurezza.
Queste avvertenze sono fornite per ragioni di sicurezza e devono
essere lette attentamente.
Questa apparecchiatura è conforme alle seguenti Direttive
Comunitarie:
- 73/23/CEE del 19/02/73 (Bassa Tensione) e successive
modificazioni;
- 89/336/CEE del 03/05/89 (Compatibilità Elettromagnetica) e
successive modificazioni.
- 2002/96/CE.
Sicurezza generale
L’apparecchio è stato concepito per un uso di tipo non
professionale all’interno dell’abitazione.
L’apparecchio deve essere usato per conservare e congelare
cibi, solo da persone adulte e secondo le istruzioni riportate in
questo libretto.
L’apparecchio non va installato all’aperto, nemmeno se lo
spazio è riparato, perché è molto pericoloso lasciarlo esposto
a pioggia e temporali.
Non toccare l’apparecchio a piedi nudi o con le mani o i piedi
bagnati o umidi.
Non toccare le parti interne raffreddanti: c’è pericolo di
ustionarsi o ferirsi.
Non staccare la spina dalla presa della corrente tirando il cavo,
bensì afferrando la spina.
Non è sufficiente il solo spegnimento del prodotto per
interrompere tutti i collegamenti elettrici.
In caso di guasto, in nessun caso accedere ai meccanismi
interni per tentare una riparazione.
Non utilizzare, all’interno degli scomparti conservatori di cibi
congelati, utensili taglienti ed appuntiti o apparecchi elettrici
se non sono del tipo raccomandato dal costruttore.
Non mettere in bocca cubetti appena estratti dal congelatore.
Questo apparecchio non è da intendersi adatto all’uso da
parte di persone (incluso bambini) con ridotte capacità fisiche,
sensoriali o mentali, o prive di esperienza e conoscenza, a
meno che siano state supervisionate o istruite riguardo all’uso
dell’apparecchio da una persona responsabile della loro
sicurezza. I bambini dovrebbero essere supervisionati per
assicurarsi che non giochino con l’apparecchio.
Gli imballaggi non sono giocattoli per bambini.
Smaltimento
Smaltimento del materiale di imballaggio: attenersi alle norme
locali, così gli imballaggi potranno essere riutilizzati.
La direttiva Europea 2012/19/EU sui rifiuti di apparecchia¬ture
elettriche ed elettroniche (RAEE), prevede che gli
elettrodo¬mestici non debbano essere smaltiti nel normale
flusso dei rifiuti solidi urbani. Gli apparecchi dismessi devono
essere raccolti separatamente per ottimizzare il tasso di
recupero e riciclaggio dei materiali che li compongono ed
impedire potenziali danni per la salute e l’ambiente. Il simbolo
del cestino barrato è riportato su tutti i prodotti per ricordare
gli obblighi di raccolta separata. Quando si acquista una
nuova apparecchiatura equivalente si può consegnare il
RAEE al negoziante, che è tenuto a ritirarlo gratuitamente;
i RAEE di “piccolissime dimensioni” (nessun lato sopra i 25
cm) possono essere consegnati gratuitamente ai negozianti
anche se non si acquista nulla (solo nei negozi con superficie
di vendita superiore a 400 mq). Per ulteriori informazioni sulla
corretta dismissione degli elettrodomestici i detentori potranno
rivolgersi al servizio pubblico preposto o ai rivenditori.
Risparmiare e rispettare l’ambiente
Installare l’apparecchio in un ambiente fresco e ben aerato,
proteggerlo dall’esposizione diretta ai raggi solari, non disporlo
vicino a fonti di calore.
Per introdurre o estrarre gli alimenti, aprire le porte
dell’apparecchio il più brevemente possibile.
Ogni apertura delle porte causa un notevole dispendio di
energia.
Non riempire con troppi alimenti l’apparecchio:
per una buona conservazione, il freddo deve poter circolare
10
IT
liberamente. Se si impedisce la circolazione, il compressore
lavorerà continuamente.
Non introdurre alimenti caldi: alzerebbero la temperatura
interna costringendo il compressore a un grosso lavoro, con
grande spreco di energia elettrica.
Anomalie e rimedi
Può accadere che l’apparecchio non funzioni. Prima di telefonare
all’Assistenza (vedi Assistenza), controllare che non si tratti di un
problema facilmente risolvibile aiutandosi con il seguente elenco.
Nessun indicatore luminoso è acceso.
Se non è attiva la Funzione I Care (vedi sezione dedicata), la
spina non è inserita nella presa di corrente o non abbastanza
da fare contatto, oppure in casa non c’è corrente.
Il motore non parte.
L’apparecchio è dotato di un controllo salvamotore (vedi Avvio
e utilizzo).
Le spie sono debolmente accese.
Staccare la spina e reinserirla nella presa dopo averla girata
su se stessa.
a) Suona l’allarme.
La porta del frigorifero è rimasta aperta per più di due minuti.
Il segnale acustico cessa alla chiusura della porta. Oppure
non si è seguita la corretta procedura di spegnimento (vedi
Manutenzione).
b) l’allarme suona e due spie blu lampeggiano.
L’apparecchio segnala un riscaldamento eccessivo del
congelatore. Si consiglia di verificare lo stato degli alimenti:
potrebbe essere necessario gettarli.
+ segnale acustico = Riscaldamento eccessivo
c )Suona l’allarme e lampeggiano le due spie gialle blu.
L’apparecchio segnala un riscaldamento pericoloso del
congelatore: gli alimenti devono essere gettati.
-26
+8
+ segnale acustico = Riscaldamento pericoloso
b/c) Nel primo caso il congelatore si manterrà a una
temperatura intorno a 0°C per non far ricongelare gli alimenti.
Per spegnere il segnale acustico: aprire e chiudere la porta del
frigorifero.
Per ripristinare il normale funzionamento del prodotto si può
spegnere e riaccendere il prodotto attraverso I pulsanti del
pannello di controllo (Vedi Descrizione)
Il frigorifero e il congelatore raffreddano poco.
Le porte non chiudono bene o le guarnizioni sono rovinate.
Le porte vengono aperte molto spesso.
Il frigorifero o il congelatore sono stati riempiti eccessivamente.
Nel frigorifero gli alimenti si gelano.
• La temperatura non è regolata correttamente (vedi descrizio-
ne)
Gli alimenti sono in prossimità dei fori di aerazione
Il motore funziona di continuo.
Il pulsante SUPER FREEZE (congelamento rapido) è premuto:
la spia blu SUPER FREEZER è accesa o lampeggia (Vedi
Descrizione)
La porta non è ben chiusa o viene aperta di continuo.
La temperatura dell’ambiente esterno è molto alta.
L’apparecchio emette molto rumore.
L’apparecchio non è stato installato ben in piano (vedi
Installazione).
L’apparecchio è stato installato tra mobili o oggetti che vibrano
ed emettono rumori.
Il gas refrigerante interno produce un leggero rumore anche
quando il compressore è fermo: non è un difetto, è normale.
GB
11
Installation
! Before placing your new appliance into operation please read these
operating instructions carefully. They contain important information for
safe use, for installation and for care of the appliance.
! Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to operate
correctly and save energy.
3. Leave a space of at least 10 cm between the top part of the
appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat (direct
sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the appliance
and the wall behind it, fit the spacers supplied in the installation
kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by
tightening or loosening the front feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:
The appliance is earthed and the plug is compliant with the law.
The socket can withstand the maximum power of the appliance,
which is indicated on the data plate located on the bottom left
side of the fridge (e.g. 150 W).
The voltage must be in the range between the values indicated
on the data plate located on the bottom left side (e.g. 220-
240V).
The socket is compatible with the plug of the appliance. If
the socket is incompatible with the plug, ask an authorised
technician to replace it (see Assistance). Do not use extension
cords or multiple sockets.
! Once the appliance has been installed, the power supply cable
and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised
technicians only (see Assistance).
! The manufacturer declines any liability should these safety
measures not be observed.
Start-up and use
Starting the appliance
! Before starting the appliance, follow the installation
instructions (see Installation).
! Before connecting the appliance, clean the compartments and
accessories well with lukewarm water and bicarbonate.
! The appliance comes with a motor protection control system which
makes the compressor start approximately 8 minutes after being
switched on. The compressor also starts each time the power supply
is cut off whether voluntarily or involuntarily (blackout).
1. Insert the plug into the socket and switch on the product using
the appropriate button, ensure that yellow refrigerator and
freezer temperature lights illuminates
2. After a few hours you will be able to put food in the refrigerator.
3. Press the SUPER FREEZE button (rapid freezing): the SUPER
FREEZE indicator light will illuminate. Once the refrigerator has
reached the optimal temperature, the indicator light goes out
and you can begin food storage.
Chiller system
NO FROST
The No Frost system circulates cold air continuously to collect
humidity and prevent ice and frost formation. The system maintains
an optimal humidity level in the compartment, preserving the
original quality of the food, preventing the food from sticking
together and making defrosting a thing of the past. Do not
block the aeration cells by placing food or containers near the
refrigerating back panel.
! Close bottles and wrap food tightly.
Using the refrigerator to its full potential
Use the REFRIGERATOR OPERATION button to adjust the
temperature (see Description).
Press the SUPER COOL button (rapid cooling) to lower
the temperature quickly. For example, when you place a
large number of new food items inside a fridge the internal
temperature will rise slightly. The function quickly cools the
groceries by temporarily reducing the temperature until it
reaches the ideal level.
Place only cold or lukewarm foods in the compartment, not hot
foods (see Precautions and tips).
Remember that cooked foods do not last longer than raw foods.
Do not store liquids in open containers. They will increase
humidity in the refrigerator and cause condensation to form
SHELVES: Due to the special guides the shelves are removable
and the height is adjustable, allowing easy storage of large
containers and food.
FRUIT and VEGETABLE bin
*
The salad crispers fitted inside the fridge have been specially
designed for the purpose of keeping fruit and vegetables fresh and
crisp. Open the humidity regulator (position B) if you want to store
food in a less humid environment like fruit, or close it (position A)
to store food in a more humid environment like vegetable.
A
B
A
B
12
GB
* Varies by number and/or position, available only on certain
models.
TEMPERATURE Indicator light
*: to identify the coldest area in
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word “OK” does not appear it means that the temperature
is too high: set a lower temperature and wait approximately 10
hours until the temperature has been stabilised.
3. Check the indicator light again: if necessary, readjust it following
the initial process. If large quantities of food have been added
or if the refrigerator door has been opened frequently, it is
normal for the indicator not to show OK. Wait at least 10 hours
before adjusting the REFRIGERATOR OPERATION knob to a
higher setting.
Using the freezer to its full potential
Use the FREEZER OPERATION button to adjust the temperature
(see Description).
Do not re-freeze food that is defrosting or that has already been
defrosted. These foods must be cooked and eaten (within 24
hours).
Fresh food that needs to be frozen must not come into contact
with food that has already been defrosted.
Do not place glass bottles which contain liquids, and which
are corked or hermetically sealed in the freezer because they
could break.
The maximum quantity of food that may be frozen daily is
indicated on the plate containing the technical properties
located on the bottom left side of the refrigerator compartment
(for example: Kg/24h: 4).
To freeze (if the freezer is already operating): press the
rapid freezing SUPER FREEZE button (corresponding blue
indicator light illuminates), insert the food and close the door.
The function is disabled automatically after 24 hours or when
optimal temperatures have been reached (indicator light goes
out)
! Do not store food too large in the upper freezer drawer if is
present the ‘Ice Device”.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 9 -14 hours.
Easy Ice
*
The double tub was designed to optimise space in the freezer
compartment and to ensure that ice is always readily available.
The trays can be stacked or filled and used separately.
Furthermore, the special fastening system makes Easy Ice an
extremely flexible solution, as it can be positioned in the right or
left part of the top drawers.
Food Care Zone *
Area dedicated to the storage of fresh food, such as meat and
fish. Thanks to the low temperature inside the compartment, the
Food Care Zone extends the period of time for which the food
can be stored, keeping it fresh for up to a week.
Food Care Zone 0°C / Safe Defrost* : A compartment designed
to keep delicate food such as meat and fish fresh. The low
temperature in the compartment (-2 / +3° C) makes it possible
to store the food for up to one week - tests performed on meat
products - without changing its nutrients, appearance and flavour.
The compartment is also very suitable for healthy food defrosting,
as low-temperature defrosting prevents any proliferation of
microorganisms, while protecting its taste and organoleptic
properties.
It is not suitable for fruit, vegetables and green salad. But it can
be used for fresh or very fresh dairy products and milk, stuffed
fresh pasta and even cooked food or leftovers.
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
1. press the FREEZER OPERATION Button and SUPER FREEZE
Button for 3 seconds to switch off the product
2. pull the plug out of the socket
! If this procedure is not followed, the alarm may sound. This
alarm does not indicate a malfunction. To restore normal operation
insert the plug into the socket, press the FREEZER OPERATION
and SUPER FREEZE button and set the FREEZER OPERATION
button on the desired value.To disconnect the appliance, follow
point 1 and 2.
Cleaning the appliance
The external and internal parts, as well as the rubber seals may
be cleaned using a sponge that has been soaked in lukewarm
water and bicarbonate of soda or neutral soap. Do not use
solvents, abrasive products, bleach or ammonia.
The removable accessories may be soaked in warm water and
soap or dishwashing liquid. Rinse and dry them carefully.
The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner set
on medium power. The appliance must be switched off and
the plug must be pulled out before cleaning the appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
• If you want to switch the appliance off for an extended period
of time, clean the inside and leave the doors open.
I Care function
The I Care function can be enabled to optimise energy
consumption. Press and hold down the SUPER COOL and
REFRIGERATOR OPERATION buttons simultaneously for at least
6 seconds to enable this function.
On enabling the function, 4 indicator lights will go on for 2 seconds:
SUPER COOL light, SUPER FREEZE light and two temperature
lights - one for the refrigerator and one for the freezer.
After 5 seconds the interface will enter the energy saving mode
and the indicator lights will go off. The interface stays off even
when the door is opened. Just press any button to switch it on
GB
13
again. Press the adjustment buttons to change the temperature.
Consumption will be optimised 48h after the function was
enabled. To disable the I Care function, switch off the product
(see description). The product can be switched on again for
normal operation.
In humid environments, when the I Care function is enabled, slight
condensation may form on the doors; normal operating conditions
are restored when the function is disabled.
Replacing the led*
Thanks to the powerful light it emits, the new LED lighting system
offers a clear view of all foods, with no shadowy areas. If the LED
needs to be replaced, please contact the Technical Assistance
Service.
Replacing the light bulb *
To replace the light bulb in the refrigerator compartment, pull out
the plug from the electrical socket. Follow the instructions below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power range
indicated on the cover.
Precautions and tips
! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and
subsequent amendments;
- 2002/96/CE..
General safety
The appliance was designed for domestic use inside the home
and is not intended for commercial or industrial use.
The appliance must be used to store and freeze food products
by adults only and according to the instructions in this manual.
The appliance must not be installed outdoors, even in covered
areas. It is extremely dangerous to leave the appliance
exposed to rain and storms.
Do not touch the appliance with bare feet or with wet or moist
hands and feet.
Do not touch the internal cooling elements: this could cause
skin abrasions or frost/freezer burns.
When unplugging the appliance always pull the plug from the
mains socket, do not pull on the cable.
Is not sufficient to switch-off of the product to eliminate all the
electrical connections.
In the case of a malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance.
Do not use any sharp or pointed utensils or electrical equipment
- other than the type recommended by the manufacturer - inside
the frozen food storage compartments.
Do not put ice cubes taken directly from the freezer into your
mouth.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of experience
and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Keep packaging material out of the reach of children! It can
become a choking or suffocation hazard.
Disposal
Observe local environmental standards when disposing
packaging material for recycling purposes.
• The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the
normal unsorted municipal waste stream.Old appliances
must be collected separately in order to optimise the
recovery and recycling of the materials they contain and
reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds
you of your obligation, that when you dispose of the appliance
it must be separately collected. Consumers should contact
their local authority or retailer for information concerning the
correct disposal of their old appliance.
Respecting and conserving the
environment
Install the appliance in a fresh and well-ventilated room. Ensure
that it is protected from direct sunlight and do not place it near
heat sources.
Try to avoid keeping the door open for long periods or opening
the door too frequently in order to conserve energy.
Do not fill the appliance with too much food: cold air must
circulate freely for food to be preserved properly. If circulation
is impeded, the compressor will work continuously.
Do not place hot food directly into the refrigerator. The internal
temperature will increase and force the compressor to work
harder and will consume more energy.
14
GB
Troubleshooting
If the appliance does not work, before calling for Assistance (see
Assistance), check for a solution from the following list.
Any indicator lights do not illuminate.
• If the function I Care is not active (see section), the plug has not
been inserted into the electrical socket, or not far enough to
make contact, or there is no power in the house.
The motor does not start.
The appliance comes with a motor protection control (see
Start-up and use).
The indicator lights are on but the light is dim.
Pull out and reverse the plug before putting it back in the socket.
a) The alarm sounds.
• The refrigerator door has remained open for more than two
minutes (the buzzer will stop sounding when you shut the door)
or the correct switching-off procedure was not followed (see
Maintenance).
b) The alarm sounds and the two blue indicator lights ash.
The temperature in the freezer is too high. Check the quality
of the food products and dispose if necessary.
+ buzzer = Heating is excessive
c) The alarm sounds and the two yellow indicator and blue
one lights ash.
The temperature in the freezer has reached a dangerous level.
The food must be disposed immediately.
-26
+8
+ buzzer = Heating danger
-b/c) In both these cases the freezer will maintain a temperature
of about 0°C so that the food does not re-freeze.
To turn off the acoustic signal open and close the refrigerator door.
restore normal operation product should be switched off and
switched on by buttons from control panel (See the description)
The refrigerator and the freezer do not cool well.
The doors do not close properly or the seals are damaged.
The doors are opened too frequently.
The refrigerator or the freezer have been over-filled.
The food inside the refrigerator is beginning to freeze.
The temperature is not adjusted properly (see description)
The food is near the back inside wall of the refrigerator.
The motor runs continuously.
The SUPER FREEZE button has been pressed (rapid freezing):
the blue SUPER FREEZE light is on (see Description).
The door is not closed properly or is continuously opened.
The outside ambient temperature is very high.
The appliance makes a lot of noise.
The appliance has not been installed on a level surface (see
Installation).
The appliance has been installed between cabinets that vibrate
and make noise.
The internal refrigerant makes a slight noise even when the
compressor is off. This is not a defect, it is normal.
19515886000
12/2017
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

HOTPOINT/ARISTON ENBLH 19363 FW Guida utente

Categoria
Frigo-congelatori
Tipo
Guida utente