Moog Videolarm SM5TF8NE Istruzioni per l'uso

Marca: Moog Videolarm

Modello: SM5TF8NE

Tipo: Istruzioni per l'uso

www.moogvideolarm.com

S M 5 C 8 N a n d S M 5 C F 8 N

PoE Ready™ Compact Vandal-Resistant Surface Mount Dome-5”

Installation and Operation Instructions for the following models:

SM5C8N Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the

(SM5T8N) side and top of the housing, 30W PoE input, with heater and Dynamic Power Allocation™.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

SM5CF8N Outdoor 5” PoE surface mount housing for small xed camera, conduit input from the side and the

(SM5TF8N) top of the housing, 30W PoE input, with heater and Dynamic Power Allocation. Polycarbonate body

and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

SM5CF8NE Outdoor 5” PoE surface mount housing for small xed camera, conduit input from the

(SM5TF8NE) side and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

(no midspan included)

SM5C8NE Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the side

(SM5T8NE) and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.

Polycarbonate body and clear/tinted dome. IP66, 1” NPT threads for pendant mount.

(no midspan included)

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5460

01-10-2013

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

17 This product has been tested and proven to work with the following midspan manufacturer

• PowersDsine • Phihong

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

SM5C8N SM5CF8N

Input Power: 100 to 240VAC (Midspan)

Power: 0.8A

Frequency: 50 to 60 HZ output

Camera: POE (55VDC)

Heater: 56VDC (max. 20W)

Energía de entrada: 100 a 240VAC (Midspan)

Energía: 0.8A

Frecuencia: 50 a 60 hertzios de salida

Cámara: POE (55VDC)

Calentador: 56VDC (máximo 20W)

Electrical Specifications

Power POE 56V

Puissance d'entrée: 100 à 240VAC (Midspan)

Puissance: 0.8A

Fréquence: 50 à 60 hertz de rendement

Appareil-photo: POE (55VDC)

Réchauffeur: 56VDC (maximum 20W)

Zugeführte Energie: 100 zu 240VAC (Midspan)

Energie: 0.8A

Frequenz: 50 bis 60 Hz Ausgang

Kamera: POE (55VDC)

Heizung: 56VDC (Maximum 20W)

Poder de entrada: 100 a 240VAC (Midspan)

Poder: 0.8A

Freqüência: 50 a 60 hertz de saída

Câmera: Ponto de entrada (55VDC)

Calefator: 56VDC (máximo 20W)

Alimentazione in ingresso di entrata: 100 a 240VAC (Midspan)

Potere: 0.8A

Frequenza: 50 - 60 hertz di uscita

Macchina fotograca: POE (55VDC)

Riscaldatore: 56VDC (massimo 20W)

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

* FIXED units ONLY

(4) M3 6mm Bolt

(1) 1/4 Flat Washer

(1) 1/4 Lock Washer

(1) Mounting Plate

(1) 1/4 x 20 Bolt

(7) 8 x 32 x 3/8" bolts

(2) 94-FSCT01

(4) M3 Lock Washers

(2) 8 x 32 Nuts

(1) Mounting Plate

(1) Fixed Bracket

(7) 8 x 32 x 3/8" Bolt

(3) 8 x 32 Nuts

(7) 8 x 32 Star Washers

PACKETS

Fixed

(4) M3 6mm Bolt

(1) 1/4 Flat Washer

(1) 1/4 Lock Washer

(1) Mounting Plate

(1) 1/4 x 20 Bolt

(7) 8 x 32 x 3/8" bolts

(2) 94-FSCT01

(4) M3 Lock Washers

(2) 8 x 32 Nuts

(4)

(8)

(4)

(1) Mounting Plate

(1) Fixed Bracket

(7) 8 x 32 x 3/8" Bolt

(3) 8 x 32 Nuts

(7) 8 x 32 Star Washers

Etch knockout slightly with utility knife.

Knock and hammer out ⅞ conduit opening

with blunt screw driver

• Golpe de gracia del grabado de pistas levemente

con el cuchillo para uso general. Golpee y resuelva la

abertura del conducto del ⅞ con destornillador

embotado

• Coup de grâce gravure à l'eau forte légèrement avec

le couteau de service. Frappez et résolvez l'ouverture

de conduit de ⅞ avec le tournevis émoussé

• Ätzung-Ausscheidungswettkampf etwas mit

Gebrauchsmesser. Klopfen Sie und hämmern Sie ⅞

Rohröffnung mit stumpfem Schraubenzieher

• KO gravura em àgua forte ligeiramente com faca de

serviço público. Bata e resolva a abertura da

canalização do ⅞ com chave de fenda sem corte

• Espulsore incissione all'acquaforte un po'con la lama

pratica. Batti e risolva l'apertura del condotto del ⅞

con il cacciavite smussato

For Surface Mounting Using Side Conduit Entrance

Drill out (3) mounting holes as shown for # 10

hardware (not supplied)

• Taladre (3) los agujeros de montaje como se

muestra para # el hardware 10 (not supplied)

• Percez (3) les trous de montage comme montré

pour # le matériel 10 (not supplied)

• Bohren Sie (3) Entlüftungslöcher wie gezeigt für

# Hardware 10 heraus (not supplied)

• Fure (3) furos de montagem como mostrado

para # a ferragem 10 (not supplied)

• Estragga (3) fori di montaggio come indicato

per # fissaggi 10 (not supplied)

WARNING: Ensure drill is

level to avoid damage to

the circuit board

Mount securely to ceiling or mounting

surface using the appropriate hardware

• Monte con seguridad a la superficie del techo

o de montaje usando el hardware apropiado

• Montez solidement au plafond ou à la surface

de montage utilisant le matériel approprié

• Bringen Sie sicher zur Decke oder zur Befestigungsfläche

unter Verwendung der passenden Hardware an

• Monte firmemente à superfície do teto ou de

montagem usando a ferragem apropriada

• Monti saldamente alla superficie di montaggio

o del soffitto per mezzo dei fissaggi adatti

Connect conduit fitting to knockout.

• Conecte el conducto que cabe con el golpe de gracia.

• Reliez le conduit s'adaptant au coup de grâce.

• Schließen Sie das Rohr an, das an

Ausscheidungswettkampf passt.

• Conecte a canalização que cabe ao KO.

• Colleghi il condotto che si adatta all'espulsore.

Remove plug with ⅝” Allen Wrench.

• Quite el enchufe con la llave Allen del ⅝”.

• Enlevez la prise clé Allen avec de ⅝ ».

• Entfernen Sie Stecker mit ⅝“ Inbusschlüssel.

• Remova o plugue com chave Allen do ⅝ de”.

• Rimuova la spina con chiave di Allen del ⅝„.

For Surface Mounting Using Side Conduit Entrance Continued

For Pendant Or Wall Mount Bracket ApplicationsFor Surface Mount Applications

For Surface Mount Applications

2 3

4 5

Seal pipe threads with teflon tape supplied

with outdoor housings.

• Hilos de rosca de pipa del sello con la cinta del Teflon

suministrada las cubiertas al aire libre.

• Filetages de tuyauterie de joint avec la bande de

teflon fournie avec les logements extérieurs.

• Dichtungsrohrgewinde mit dem Teflonklebeband

geliefert mit im Freiengehäusen.

• Linhas de tubulação do selo com a fita do Teflon

fornecida com as carcaças ao ar livre.

• Filetti di tubo della guarnizione con nastro adesivo del

Teflon fornito con gli alloggiamenti esterni.

Thread housing to optional pendent pipe

or wall mount bracket

• Hilo de rosca que contiene al soporte pendiente

opcional del montaje de la pipa o de la pared

• Fil logeant à la parenthèse en suspens facultative

de bâti de pipe ou de mur

• Gewinde, das zum wahlweise freigestellten pendent

Rohr- oder Wandeinfassungshaltewinkel unterbringt

• Linha que abriga ao suporte pendent opcional da

montagem da tubulação ou da parede

• Filetto che alloggia alla staffa pendent facoltativa

del supporto della parete o del tubo

For Pendant Or Wall Mount Applications

Finish assembly with Pendant or Wall mount

(not supplied).

• Asamblea del final con el montaje pendiente o de la

pared (not supplied).

• Finition avec le bâti en suspens ou de mur (not supplied).

• Ende mit Pendent oder Wandeinfassung (not supplied).

• Conjunto do revestimento com a montagem Pendent

ou da parede (not supplied).

• Assemblea di rivestimento con il supporto della parete

o Pendent (not supplied).

Feed wiring through threaded hole.

•

Cableado de la alimentación a través del agujer roscado

• Câblage d'alimentation par le trou fileté.

• Zufuhrverdrahtung durch verlegtes Loch.

• Fiação da alimentação através do furo rosqueado.

•

Collegamenti dell'alimentazione attraverso il foro filettato.

Axis M10 Camera Series

Camera hole

pattern

Axis M-10

Axis 207

Adding

Spacers

Attach Axis camera mount to camera base plate. Use (4) 1” spacers and attach camera base plate to housing.

• Ate el montaje de cámara del eje al embase de la cámara. Utilice (4) los” espaciadores 1 y ate el embase de la cámara a la

cubierta.

• Attachez la monture de caméra d'axe à l'embase d'appareil-photo. Employez (4) les » entretoises 1 et attachez l'embase d'appareil-

photo au logement.

• Bringen Sie Mittellinienkameraeinfassung zur Grundplatte der Kamera an. Verwenden Sie (4)“ Distanzscheiben 1 und bringen Sie

Grundplatte der Kamera zum Gehäuse an.

• Una a montagem de câmera da linha central à placa baixa da câmera. Use (os” espaçadores 4) 1 e una a placa baixa da câmera

à carcaça.

• Attacchi il supporto di macchina fotografica di asse alla base di appoggio della macchina fotografica. Usi (4)„ i distanziatori 1 ed

attaccano la base di appoggio della macchina fotografica ad alloggiamento.

Arecont AV1315 / AV2815 / AV2805 / AV10005 Camera

REMOVE

Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and

complete wiring connections.

• Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las

conexiones del cableado.

• Enlevez la section centrale de la parenthèse fixe d'appareil-photo. Attachez au plat de support avec le matériel fourni. Fixez et

accomplissez les raccordements de câblage.

• Entfernen Sie mittleren Abschnitt von örtlich festgelegtem Kamerahaltewinkel. Bringen Sie zur Montageplatte mit der bereitgestellten

Hardware an. Sichern Sie und schließen Sie Verdrahtungsanschlüsse ab.

• Remova a seção center de suporte fixo da câmera. Una à placa de montagem com a ferragem fornecida. Fixe e termine conexões

da fiação.

• Rimuova la sezione concentrare dalla staffa fissa della macchina fotografica. Attacchi al giunto di supporto con fissaggi forniti. Assicuri

e completi i collegamenti dei collegamenti.

Install (4) .5” + (4) 2.0”

spacers to center bosses.

• Instale (4) .5” + (4) 2.0” espaciadores para

centrar los jefes.

• Installez (4) .5 » + (4) 2.0 » entretoises pour

centrer des patrons.

• Bringen Sie (4) .5“ + (4) 2.0“ Distanzscheiben

an, um Chefs zu zentrieren.

• Instale (4) .5” + (4) 2.0” espaçadores para

centrar saliências.

• Installi (4) .5„ + (4) 2.0„ distanziatori per

concentrarsi le sporgenze.

Secure camera quick release

mounting plate with #8 hardware

provided.

• Pletina segura del lanzamiento rápido de la cámara

con el hardware #8 proporcionado.

• Le plat de support bloqué de dégagement rapide

d'appareil-photo avec le matériel #8 a fourni.

• Sichere Montageplatte der schnellen Freigabe der

Kamera mit Hardware #8 stellte zur Verfügung.

• Placa de montagem segura da liberação rápida

da câmera com a ferragem #8 fornecida.

• Il giunto di supporto sicuro del rilascio rapido della

macchina fotografica con fissaggi #8 ha fornito.

Tighten hardware and

complete wiring.

• Apriete el hardware y termine el cableado.

• Serrez la visserie et accomplissez le câblage.

• Ziehen Sie Hardware fest und schließen Sie

Verdrahtung ab.

• Aperte a ferragem e termine a fiação.

• Stringa i fissaggi e completi i collegamenti.

(52

) 2"

(13

) ½"

Use this hole

pattern

Axis 212 PTZ Camera

(52

) 2"

(13

) ½"

Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and

complete wiring connections.

• Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las

conexiones del cableado.

• Enlevez la section centrale de la parenthèse fixe d'appareil-photo. Attachez au plat de support avec le matériel fourni. Fixez et

accomplissez les raccordements de câblage.

• Entfernen Sie mittleren Abschnitt von örtlich festgelegtem Kamerahaltewinkel. Bringen Sie zur Montageplatte mit der bereitgestellten

Hardware an. Sichern Sie und schließen Sie Verdrahtungsanschlüsse ab.

• Remova a seção center de suporte fixo da câmera. Una à placa de montagem com a ferragem fornecida. Fixe e termine conexões

da fiação.

• Rimuova la sezione concentrare dalla staffa fissa della macchina fotografica. Attacchi al giunto di supporto con fissaggi forniti. Assicuri

e completi i collegamenti dei collegamenti.

Axis 216 Camera

Install (4) .5” spacers to

center bosses.

• Instale (4) espaciadores del .5 los” para

centrar los jefes.

• Entretoises installez (4) .5 des » pour centrer

des patrons.

• Bringen Sie (4) .5“ Distanzscheiben an, um

Chefs zu zentrieren.

• Instale (4) espaçadores do .5” para centrar

saliências.

• Installi (4) distanziatori del .5„ per

concentrarsi le sporgenze.

(13

) ½"

Secure camera quick release

plate to mounting plate with

#8 hardware provided.

• Placa segura del lanzamiento rápido de la

cámara a la pletina con el hardware #8

proporcionado.

• Le plat bloqué de dégagement rapide

d'appareil-photo au plat de support avec le

matériel #8 a fourni.

• Sichere Platte der schnellen Freigabe der

Kamera zur Montageplatte mit der Hardware

#8 bereitgestellt.

• Placa segura da liberação rápida da câmera

à placa de montagem com a ferragem #8

fornecida.

• Il piatto sicuro del rilascio rapido della

macchina fotografica al giunto di supporto

con fissaggi #8 ha fornito.

Tighten hardware and

complete wiring.

• Apriete el hardware y termine el cableado.

• Serrez la visserie et accomplissez le câblage.

• Ziehen Sie Hardware fest und schließen Sie

Verdrahtung ab.

• Aperte a ferragem e termine a fiação.

• Stringa i fissaggi e completi i collegamenti.

Use this hole

pattern

Install (4) .5” + (4) 2.0”

spacers to center bosses.

• Instale (4) .5” + (4) 2.0” espaciadores para

centrar los jefes.

• Installez (4) .5 » + (4) 2.0 » entretoises pour

centrer des patrons.

• Bringen Sie (4) .5“ + (4) 2.0“ Distanzscheiben

an, um Chefs zu zentrieren.

• Instale (4) .5” + (4) 2.0” espaçadores para

centrar saliências.

• Installi (4) .5„ + (4) 2.0„ distanziatori per

concentrarsi le sporgenze.

Secure camera quick release

plate to mounting plate with #8

hardware provided.

• Pletina segura del lanzamiento rápido de la

cámara con el hardware #8 proporcionado.

• Le plat de support bloqué de dégagement

rapide d'appareil-photo avec le matériel #8 a

fourni.

• Sichere Montageplatte der schnellen Freigabe der

Kamera mit Hardware #8 stellte zur Verfügung.

• Placa de montagem segura da liberação rápida

da câmera com a ferragem #8 fornecida.

• Il giunto di supporto sicuro del rilascio rapido della

macchina fotografica con fissaggi #8 ha fornito.

Secure camera safety screw.

• Asegure el tornillo de la seguridad de la

cámara.

• Fixez la vis de sûreté d'appareil-photo.

• Sichern Sie Kamerasicherheitsschraube.

• Fixe o parafuso da segurança da câmera.

• Fissi la vite di sicurezza della macchina

fotografica.

(52

) 2"

(13

) ½"

Panasonic BB-HCM381 / KX-HCM280A Camera

Panasonic WV-SF304 / WV-SF336 Camera

Install (4) 1” spacer to

center bosses.

• Instale (4) 1” espaciador para centrar los

jefes.

• Installez (4) 1 » entretoise pour centrer des

patrons.

• Bringen Sie (4) 1“ Distanzscheibe an, um

Chefs zu zentrieren.

• Instale (4) 1” espaçador para centrar

saliências.

• Installi (4) 1„ distanziatore per concentrarsi le

sporgenze.

Secure camera quick release

mounting plate with #8

hardware provided.

• Pletina segura del lanzamiento rápido de la

cámara con el hardware #8 proporcionado.

• Le plat de support bloqué de dégagement

rapide d'appareil-photo avec le matériel #8 a

fourni.

• Sichere Montageplatte der schnellen Freigabe

der Kamera mit Hardware #8 stellte zur

Verfügung.

• Placa de montagem segura da liberação

rápida da câmera com a ferragem #8

fornecida.

• Il giunto di supporto sicuro del rilascio rapido

della macchina fotografica con fissaggi #8 ha

fornito.

Secure camera safety screw.

• Asegure el tornillo de la seguridad de la

cámara.

• Fixez la vis de sûreté d'appareil-photo.

• Sichern Sie Kamerasicherheitsschraube.

• Fixe o parafuso da segurança da câmera.

• Fissi la vite di sicurezza della macchina

fotografica.

(25

) 1"

Panasonic WV-NF284 / WV-NF302 Camera

Install (4) .5” spacers to

center bosses.

• Instale (4) espaciadores del .5 los” para

centrar los jefes.

• Entretoises installez (4).5 des » pour centrer

des patrons.

• Bringen Sie (4) .5“ Distanzscheiben an, um

Chefs zu zentrieren.

• Instale (4) espaçadores do .5” para centrar

saliências.

• Installi (4) distanziatori del .5„ per concen-

trarsi le sporgenze.

(13

) ½"

Secure camera quick release

mounting plate with #8 hardware

provided.

• Pletina segura del lanzamiento rápido de la cámara

con el hardware #8 proporcionado.

• Le plat de support bloqué de dégagement rapide

d'appareil-photo avec le matériel #8 a fourni.

• Sichere Montageplatte der schnellen Freigabe der

Kamera mit Hardware #8 stellte zur Verfügung.

• Placa de montagem segura da liberação rápida da

câmera com a ferragem #8 fornecida.

• Il giunto di supporto sicuro del rilascio rapido della

macchina fotografica con fissaggi #8 ha fornito.

Tighten hardware and

complete wiring.

• Apriete el hardware y termine el cableado.

• Serrez la visserie et accomplissez le câblage.

• Ziehen Sie Hardware fest und schließen Sie

Verdrahtung ab.

• Aperte a ferragem e termine a fiação.

• Stringa i fissaggi e completi i collegamenti.

Panasonic WV-NS202 / WV-SC385 Camera

1” spacers + (4) .5” spacers

(4) corner bosses.

• 1” espaciadores + (4) jefes de la esquina de

los espaciadores del .5” (4).

• 1 » entretoises + (4) patrons faisants le coin

des entretoises de .5 » (4).

• 1“ Distanzscheiben + (4) .5“ Eckchefs der

Distanzscheiben (4).

• saliências de canto dos espaçadores de 1”

espaçadores + (4) .5” 4).

• i distanziatori del 1„ distanziatori + (4) .5„ (4)

sporgenze d'angolo.

(26

) 1"

Secure camera quick release

mounting plate with ¼” hardware

provided.

• Pletina segura del lanzamiento rápido de la cámara

con el hardware ¼” proporcionado.

• Le plat de support bloqué de dégagement rapide

d'appareil-photo avec le matériel ¼” a fourni.

• Sichere Montageplatte der schnellen Freigabe der

Kamera mit Hardware ¼” stellte zur Verfügung.

• Placa de montagem segura da liberação rápida da

câmera com a ferragem ¼” fornecida.

• Il giunto di supporto sicuro del rilascio rapido della

macchina fotografica con fissaggi ¼” ha fornito.

Tighten hardware and

complete wiring.

• Apriete el hardware y termine el cableado.

• Serrez la visserie et accomplissez le câblage.

• Ziehen Sie Hardware fest und schließen Sie

Verdrahtung ab.

• Aperte a ferragem e termine a fiação.

• Stringa i fissaggi e completi i collegamenti.

(13

) ½"

Toshiba IKWB21A Camera

Cable to camera (B), Network / Power (A). Unit is

ready to power up.

• Cablegrafíe a la cámara (b), red hacia / fuera (a). La unidad está

lista para accionar para arriba.

• Câblez à l'appareil-photo (b), le réseau / dehors (a). L'unité est

prête à mettre sous tension.

• Kabeln Sie zu Kamera (b), Netz / heraus (a). Maßeinheit ist bereit,

oben anzutreiben.

• Cabografe à câmera (b), rede / para fora (a). A unidade está

pronta para pôr acima.

• Cavo alla macchina fotografica (B), rete / fuori (A). L'unità è

pronta ad alimentare in su.

Power Reset

LEDs

Network to Camera

Network / Power In

Press the Calibration button for one second. Both the

Test and Heat LED will turn ON. Once the unit has been

successfully calibrated, the Test and Heat LED will turn

OFF. Once this is complete the Heat LED will turn ON

only if the heater is ON.

• Pulse el botón de calibración durante un segundo. Tanto la prueba y el calor se

encenderá. Una vez que la unidad ha sido calibrado correctamente, la prueba y

el calor del LED se apagará. Una vez que se trata de completar el calor se

encenderá sólo si el calentador está encendido.

• Appuyez sur le bouton d'étalonnage pour une seconde. Tant le test et la chaleur

LED s'allume. Une fois l'appareil a été étalonné avec succès, le test et la chaleur

LED s'éteindra. Une fois cette opération terminée, la chaleur LED s'allume que si

le chauffage est allumé.

• Drücken Sie die Taste Kalibrierung für eine Sekunde. Sowohl der Test-und

Wärme-LED leuchtet auf. Sobald das Gerät erfolgreich kalibriert wurde, wird

die Test-und Wärme-LED auszuschalten. Sobald dies abgeschlossen ist die

Wärme-LED leuchtet auf, wenn die Heizung an ist.

• Pressione o botão de calibração para um segundo. Tanto o teste como calor

LED acenderá. Uma vez que o aparelho foi calibrado com sucesso, o teste e

calor LED apaga-se. Uma vez que este é completar o calor LED acenderá se

o aquecedor está ligado.

• Premere il pulsante di calibrazione per un secondo. Sia il test e di calore LED

si accende. Una volta che l'unità è stata correttamente calibrata, il collaudo e

calore LED si spegne. Una volta che questo è completare il calore LED si

accende solo se il riscaldatore è ON.

Reset

NOTE:

To maximize power for the camera and heater option, the unit

requires that you calibrate the enclosure. During calibration,

the onboard processor intelligently determines the maximum

safe power output of the midspan, and ensures that the

enclosure does not exceed that limit. Once calibration is

complete the required values are stored in permanent

memory, with no additional calibration required.

• Para maximizar la potencia de la opción de cámara y la calefacción, la unidad requiere

que calibre la caja. Durante la calibración, el procesador de a bordo determina de forma

inteligente la potencia máxima seguridad del centro de la luz, y asegura que el recinto no

exceda de ese límite. Una vez que la calibración se ha completado los valores requeridos

se almacenan en la memoria permanente, sin calibración adicional.

• Pour maximiser la puissance de l'option appareil photo et le chauffage, l'unité exige

que vous calibrer l'enceinte. Lors de l'étalonnage, le processeur embarqué détermine

intelligemment la puissance de sortie maximale de sécurité de l'injecteur, et veille à ce

que l'enceinte ne dépasse pas cette limite. Une fois l'étalonnage est terminé, les valeurs

requises sont stockées dans la mémoire permanente, sans étalonnage supplémentaire

n'est nécessaire.

• Um Strom für die Kamera und Heizung Option zu maximieren, setzt das Gerät, dass

Sie das Gehäuse zu kalibrieren. Während der Kalibrierung der Onboard-Prozessor

ermittelt intelligent die maximale sichere Leistung der Feldmitte, und sorgt dafür, dass

das Gehäuse nicht überschreitet diese Grenze. Sobald die Kalibrierung abgeschlossen

ist die geforderten Werte im permanenten Speicher abgelegt werden, ohne zusätzliche

Kalibrierung erforderlich.

• Para maximizar a potência para a opção câmera e aquecedor, a unidade exige que você

calibrar o gabinete. Durante a calibragem, o processador de bordo inteligentemente

determina a potência de saída máxima de segurança do midspan, e assegura que o

invólucro não exceder o limite. Uma vez que a calibração é completar os valores

necessários são armazenados na memória permanente, sem calibração adicional

necessário.

• Per massimizzare la potenza per l'opzione della fotocamera e il riscaldatore, l'unità

richiede la calibrazione del contenitore. Durante la calibrazione, il processore a bordo

determina in modo intelligente la potenza massima sicurezza del midspan, e assicura

che la custodia non superi tale limite. Una volta calibrazione è completa dei necessari

valori memorizzati nella memoria permanente, senza calibrazione aggiuntiva richiesta.

PoE 30W Input for 30W Camera

WARNING!

• The heater and blower will not start for 60 seconds

after power is applied to the product.

• Wait for the camera to completely boot up before

pressing the calibration button. This will allow for the

most accurate calibration.

• The heater and blower will not start for 60 seconds after power is applied to the product.

• Wait for the camera to completely boot up before pressing the calibration button. This

will allow for the most accurate calibration.

• Le chauffage et de ventilation ne démarre pas pendant 60 secondes après mise sous

tension est appliquée au produit.

• Attendez que l'appareil photo à démarrer complètement avant appuyant sur le bouton

d'étalonnage. Cela permettra pour le calibrage le plus précis.

• Die Heizung und das Gebläse wird nicht für 60 Sekunden nach dem Einschalten starten,

um das Produkt angewendet wird.

• Warten Sie, bis sich die Kamera komplett hochfahren, bevor Sie die Kalibrierung Taste.

Dies wird für die genaue Kalibrierung ermöglichen.

• Aquecedor e soprador A não será iniciado durante 60 segundos após a energia é aplicada

ao produto.

• Aguarde até que a câmera completamente arrancar antes de premir o botão de

calibração. Isto irá permitir a calibração mais precisas.

• Il riscaldamento e sofante non inizierà per 60 secondi dopo l'alimentazione è applicata

al prodotto.

• Attendere che la macchina fotograca per avviare completamente a prima di premere il

pulsante di calibrazione. Questo permetterà la taratura più accurata.

Attach lanyard loop to hook

• Ate el lazo del acollador al gancho

• Attachez la boucle de lanière au crochet

• Bringen Sie Abzuglinieschleife zum Haken an

• Una o laço do colhedor ao gancho

• Attacchi il ciclo della cordicella al gancio

Install security screw, if desired

• Instale el tornillo de la seguridad, si está deseado

• Installez la vis de sécurité, si désiré

• Bringen Sie Sicherheitsschraube an, wenn Sie

gewünscht werden

• Instale o parafuso da segurança, se desejado

• Avviti la vite di sicurezza, se voluto

Secure Dome Assembly to housing

• Asegure la asamblea de la bóveda a la cubierta

• Fixez l'Assemblée de dôme au logement

• Befestigen Sie Haube an Gehäuse

• Fixe o conjunto da abóbada à carcaça

• Assicuri l'Assemblea della cupola ad alloggiamento

Clean dome with MILD soap and water ONLY

• Limpie la bóveda con el jabón y agua SUAVES

SOLAMENTE

• Nettoyez le dôme avec de l'eau le savon et DOUX

SEULEMENT.

• Säubern Sie Haube mit NUR MILDER Seife und Wasser

• Limpe a abóbada com o sabão e água SUAVES

SOMENTE

• Pulisca la cupola con sapone ed acqua DELICATI

SOLTANTO

Replacement Parts List

Item

Number

Part

Number

Comments

RP0SM5TR

RPDC5

RP40VL3586

RP95FSP01

RPBACH8N

RP762010

RPHACH8N

RPVL3790

RP70VL9001G

Replace Trim Ring Assembly

Dome and Gasket

SM5 Housing

1” NPT Plug

Blower

POE SM5 PCB

Heater for POE Housing

Heater Bracket

30Watt Midspan

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assured that Moog Videolarm stands behind its products by offering impressive 3 Year and 5 Year warranties, depending on the product

purchased. See full warranty details at www.moogvideolarm.com/technical-support/warranty-plan/

Please take a few moments to register your purchase via the Online Product Registration Form at:

www.moogvideolarm.com/technical-support/product-registration

• Simple and Trouble-Free RMA process

• Receive product updates, and special promotion

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…