Toshiba dynadock PA3542 Manuale utente

User’s Manual

dynadock™

EN-2 User’s Manual

dynadock™

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting the dynadock to the Computer . . . . . . . . . . . . . . . . . . . . 13

Installing the Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Uninstalling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Uninstalling - Windows Vista Operations . . . . . . . . . . . . . . . . . . . . . . 22

Uninstalling - Windows XP Operations. . . . . . . . . . . . . . . . . . . . . . . . 24

Using the dynadock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

USB 2.0 Ports (Front and Back Panel). . . . . . . . . . . . . . . . . . . . . . . . 26

Ethernet Port (Back Panel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Serial Port (Back Panel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Front Panel Audio Port (Microphone). . . . . . . . . . . . . . . . . . . . . . . . . 28

Front Panel Audio Port (Headphones or Speakers). . . . . . . . . . . . . . 28

Video Port (VGA or DVI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

How Standby/Sleep or Hibernate Mode Affects Devices Attached

to the dynadock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Disconnecting the dynadock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Eject Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Eject Dock and Sleep. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Eject by use of command line. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Removing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Select Audio Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

User’s Manual EN-3

Regulatory Compliance

FCC Information

Product Name: dynadock

Model number: PA3541*, PA3542*

FCC notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

■ Reorient or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■ Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This equipment has been tested and found to comply with Part 15 of the

FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received. Including

interference that may cause undesired operation.

Contact

WARNING: Changes or modifications made to this equipment, not

expressly approved by TOSHIBA or parties authorized by TOSHIBA could

void the user’s authority to operate the equipment.

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618-1697

Telephone: (949) 583-3000

EN-4 User’s Manual

dynadock™

EU Declaration of Conformity

TOSHIBA declares, this product conforms to the following Standards:

This product is carrying the CE-Mark in accordance with the related

European Directives. Responsible for CE-Marking is TOSHIBA Europe,

Hammfelddamm 8, 41460 Neuss, Germany.

WEEE Information

For EU (European Union) member users: According to the WEEE (Waste

electrical and electronic equipment) Directive, do not dispose of this

product as household waste or commercial waste. Waste electrical and

electronic equipment should be appropriately collected and recycled as

required by practices established for your country. For information on

recycling of this product, please contact your local authorities, your

household waste disposal service or the shop where you purchased the

product.

Safety Instructions

Always read the safety instructions carefully:

■ Keep this User’s Manual for future reference

■ Keep this equipment away from humidity

■ If any of the following situations arise, get the equipment checked by a

service technician:

■ The equipment has been exposed to moisture.

■ The equipment has been dropped and damaged.

■ The equipment has obvious sign of breakage.

■ The equipment has not been working well or you cannot get it to

work according to the User’s Manual.

Supplementary

Information:

“This product complies with the requirements of the

EMC Directive 89/336/EEC and/or the Low Voltage

Directive 73/23/EEC.”

User’s Manual EN-5

Copyright Statement

No part of this publication may be reproduced in any form by any means

without the prior written permission. Other trademarks or brand names

mentioned herein are trademarks or registered trademarks of their

respective companies.

Disclaimer

Information in this document is subject to change without notice. The

manufacturer does not make any representations or warranties (implied or

otherwise) regarding the accuracy and completeness of this document and

shall in no event be liable for any loss of profit or any commercial damage,

including but not limited to special, incidental, consequential, or other

damage.

January 2007, Rev2.0

Trademarks

Intel, Intel Core, Pentium and Celeron are trademarks or registered

trademarks of Intel Corporation.

Microsoft, Microsoft Office, Windows and Windows Vista are either

registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries.

AMD, AMD K6, Athlon and Duron are trademarks of Advanced Micro

Devices Incorporated.

Ethernet is a registered trademark and Fast Ethernet is a trademark of

Xerox Corporation.

Adobe and Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

Other trademarks and registered trademarks not listed above may be used

in this manual.

Precautions

The Fn + F5 functionality detailed in the electronic User’s Guide for your

TOSHIBA computer only controls the internal video controller of your

computer.

The TOSHIBA dynadock utilizes an advanced video graphics controller to

display the video on the external monitor connected to it. However, due to

USB 2.0 transfer speed limitations, some or all portions of DVD playback

may appear slow or choppy. This is not a malfunction of the dynadock.

Move the video playback from the external monitor to your computer

display for optimal video performance when viewing DVDs.

EN-6 User’s Manual

dynadock™

The playback of DVD is not supported in the mirror mode.

The 3D screensavers (3D FlowerBox and so on) do not work in either

mirror or extended mode.

This product does not support 3D programs.

Unable to enter full screen DOS mode in the mirror mode.

Google Earth does not work in the mirror mode.

The video driver passes 24-bit data to the device if you have selected 32-bit

color quality. This is for more efficient data transfer.

When recording audio, it is recommended that you manually configure the

microphone volume settings.

Precautions for Windows Vista™ only

The dynadock only supports the mirror mode for display.

When the dynadock is connected, the screens of your computer and

external device will become BASIC mode automatically. The screen of your

computer will return to AERO mode automatically when the dynadock is

disconnected.

The games in OpenGL such as Quake3 will not be supported in the mirror

mode. If you want to play these kinds of games, we suggest you disconnect

the dynadock.

USB, CPU resources and other devices may be affected when playing

movies or transferring large amounts of data via the dynadock

.

The external monitor will not turn off automatically by the operating system

power management.

The sound may be distorted or delayed when you play MIDI/MPG files. If

it’s a MIDI file, please try to change your media player visualization

settings. If it’s a MPG file, we suggest you play it without connecting the

dynadock.

User’s Manual EN-7

Introduction

The Toshiba dynadock with Video utilizes a single USB port to extend your

computer to your desktop environment with one easy connection, enabling

you to connect all of your peripherals, including six USB devices, Ethernet

network, serial device, headphones, speakers and microphone plus an

external monitor and digital audio equipment. It’s ideal for the computers

having extra connectivity demands.

The upright slim design of the dynadock saves your desktop space while

the two USB ports on the front panel give you easy accessibility. The

dynadock is hot swappable; you can add or remove any device without

rebooting the computer. With all these features, the dynadock is a perfect

accessory whether you are at home or at the office.

With the video port, your computer can be connected to an external

monitor, LCD or projector at native display resolutions of up to 1600 x 1200

pixels (DVI version only). The connected monitor can be configured to

either mirror your primary screen or extend (in Windows XP only) the

Windows

®

desktop allowing visibility of more applications at the same time.

No more stacking windows within the confines of a single display.

An additional feature is the S/PDIF digital audio output. It directly outputs

the digital sound source from the computer to your home audio receiver

without the loss of high quality sound. If you are using 2 channel speakers

or headphones via the conventional audio port, you can still enjoy the 7.1

surround sound, which is achieved by the virtual multi-channel audio

function.

Features

■ Single USB plug connecting to your computer

■ Upright slim design saves desktop space

■ Easily accessible ports located on the front

■ Supports notebook-quality video on external monitor

■ VGA resolution up to SXGA (1280 x 1024), 16/32-bit color

■ DVI resolution up to UXGA (1600 x 1200), 16/32-bit color

■ Hot swappable; add or remove devices without rebooting the computer

■ Virtual 7.1 channel surround sound

■ All video and audio drivers included

NOTE: The dynadock is available in two video support versions, either a

VGA video port or a DVI video port. This user manual contains information

for both versions of the dynadock. Please pay attention to and follow the

instructions for the version you have.

EN-8 User’s Manual

dynadock™

■ Provides TOSHIBA dynadock Utility to remove all the devices at one

time

■ Power is always provided by the front USB ports, even though the

computer is off

Front panel

(Sample Illustration) Indicators and connectors on the front of the dynadock

Power LED: Glows blue when the dynadock is

powered on.

USB Hub LED: Glows green when any of the six USB

ports are connected to a USB device.

2 USB 2.0 powered ports: For connection to USB

peripherals.

3.5 mm mono microphone input port: For

connection to an external mono microphone for

recording.

3.5 mm stereo audio output port: For connection to

stereo headphones or speakers.

User’s Manual EN-9

Introduction

Back panel

(Sample Illustration) Connections on the back of the dynadock

Optical S/PDIF digital out port: Use an optical

S/PDIF cable (not provided) to connect to your

digital audio equipment, e.g., Dolby Digital

Surround Sound receiver and speaker system

To use this connection, your receiver must have

an optical S/PDIF input.

DB9 Serial port: For connection to the serial device

you want to control.

4 USB 2.0 ports (A type female connector): For

connection to USB peripherals.

10/100 Mbps Ethernet port: For connection to the

Ethernet network via a network cable (not provided).

USB port: For connection to the USB port of the

host computer.

DVI video output port: For connection to a DVI

monitor (shown).

- or -

VGA video output port: For connection to a VGA

monitor (not shown).

Cable Lock Slot: Allows you to connect a cable lock

to help prevent theft (not provided).

Power jack: For connection to the provided AC

adaptor. The dynadock always needs an external

power supply for operation, as it does not take

power from the USB bus.

Cable holder holes: Allows you to hook the cable

holder once all of your devices are attached.

EN-10 User’s Manual

dynadock™

Package contents

■ dynadock (VGA or DVI video interface)

■ Base plate

■ Cable Holder

■ USB 2.0 Cable

■ AC Power Adaptor

■ AC Power Cord/cable

■ CD (User Manual, Driver and Utility)

■ Quick Installation Guide

■ DVI to VGA video adapter (DVI version only)

System Requirements

■ 1.2GHz or higher processor. Intel Pentium/Celeron family, or AMD K6/

Athlon/Duron family, or compatible processor recommended (Core™ 2

Duo 2.0 GB or higher processor recommended for optimal video

performance)

■ 512 MB memory or higher (1 GB memory or higher recommended)

■ USB 2.0 port

■ 30 MB of available disk space

■ Windows

®

XP with SP2/Windows Vista™ (32-bit edition)

■ For optimal results the display resolution should be configured to

800 x 600 with 16-bit color.

User’s Manual EN-11

Assembly

Remove the base and dynadock from the packaging. You will need to

assemble the two pieces.

(Sample Illustration) The dynadock and base before assembly

Slide the dynadock onto the base as shown below.

(Sample Illustration) Assembling the dynadock and base

EN-12 User’s Manual

dynadock™

When assembled, the dynadock is a self-standing, easy to place unit.

(Sample Illustration) The assembled dynadock

User’s Manual EN-13

Installation

Connecting the dynadock to the Computer

Before installation, it is recommended to connect the dynadock to your PC

first. Please follow the steps to connect it correctly:

1. Plug the AC adaptor into the DC-IN on the back of the dynadock.

(Sample Illustration) Connecting the power to the dynadock

2. Connect the AC adaptor with the power cord/cable, and then connect

the power cord/cable to a live electrical outlet. The power indicator on

the front panel glows blue when the dynadock is powered on.

3. Plug the square end of the USB cable into the USB upstream connector

on the back of the dynadock.

(Sample Illustration) Connecting the USB cable to the dynadock

EN-14 User’s Manual

dynadock™

4. Plug the other end of the USB cable into an available USB 2.0 port on

your computer.

(Sample Illustration) Connecting the USB cable to your computer

5. Connect your notebook computer to a power source and turn it on. For

more information on connecting your computer to a power source, read

the documentation for your computer.

Installing the Drivers

1. Insert the provided Installation CD into your optical disc drive. It will run

automatically and the dialog box will appear.

If the auto-run function is disabled on your system, the program will fail

to load automatically. Please open the disk in explorer, and double click

“AutoRun.exe”.

(Sample Illustration) Initial Screen

NOTE: Be sure to remember which USB port is used for the driver

installation and always plug the dynadock into the same USB port,

otherwise, Windows

®

will treat the dynadock as a new device and ask to

install the drivers again. Only one dynadock can be operated on one PC at

a time.

NOTE: The following installation steps are for both Windows Vista™ and

Windows XP operating systems. Although most steps are similar, there are

some differences between the two operating systems so please follow the

steps for your operating system where indicated.

User’s Manual EN-15

Installation

2. Click on “Install dynadock Utility & Driver”, the program will begin

installing the dynadock Utility and all drivers necessary for the

dynadock device. Follow the screen directions to finish the utility

installation.

Step 1: When the welcome screen appears, click Next.

(Sample Image) Welcome screen

Step 2: Select “I Agree” and click Next.

(Sample Illustration) License Agreement screen

Step 3: Choose the destination folder.

(Sample Image) Choose Destination Location screen

EN-16 User’s Manual

dynadock™

Step 4: Click Next to start the installation. This may take several

minutes.

(Sample Image) Ready to Install screen

Step 5: Click Close when the “Installation Complete” dialog box shown

below appears.

(Sample Image) Finish screen

NOTE: There are slight differences in the installation between Windows

Vista and Windows XP. Please follow the steps for your operating system.

User’s Manual EN-17

Installation

Windows Vista Operations:

3. After the utility installation is completed, the “Video” driver will be

installed.

Step 1: When the welcome screen appears, click Next.

(Sample Image) Welcome screen

Step 2: Select “I accept the terms in the License Agreement” and click

Next.

(Sample Illustration) License Agreement screen

Step 3: Click Install to start the installation. This may take several

minutes.

(Sample Image) Ready to Install screen

EN-18 User’s Manual

dynadock™

Step 4: Click Finish when the dialog box shown below appears.

(Sample Image) Finish screen

4. Once the video drivers are installed, the “Audio” driver will be installed

automatically. This step requires the dynadock to be connected to your

computer. If the dynadock is not detected, the following message will

appear. Please connect the dynadock to your computer and click Retry

to proceed.

(Sample Image) Not detected the dynadock screen

5. After finishing the installation, the program will request you to restart the

computer. Choose “Yes” and click OK to finish the setup. All devices will

take effect after restarting.

(Sample Image) Restart computer screen

NOTE: This completes the installation for Windows Vista.

User’s Manual EN-19

Installation

Windows XP Operations:

3. After the utility installation is completed, the “Video” driver will be

installed automatically.

(Sample Image) Video driver Install screen

4. Once the video drivers are installed, a message will prompt you to

install the “Audio” driver. This step requires the dynadock to be

connected to your computer. Click OK to proceed or connect the

dynadock to your computer now by referring to the Connecting the

dynadock to the Computer section.

If the dynadock is not detected, the message will appear again. Please

make sure the dynadock is connected correctly.

If you click Cancel, the program will exit the installation of the audio

driver.

(Sample Image) Not detected the dynadock screen

NOTE: During the installation, the screen will flicker a couple of times. This

is normal. A dialog box may prompt to restart the computer. Please do not

restart at this time in order to install additional drivers.

NOTE: Installation of the “Audio” driver will fail if the dynadock is not

connected to the PC.

EN-20 User’s Manual

dynadock™

5. Install drivers.

Follow the screen directions to finish the driver installation.

Step 1: When the welcome screen appears, click Next.

(Sample Image) Setting selection screen

Step 2: Choose a destination location for the installation or just use the

default location. Then click Next.

(Sample Image) Choose Destination Location screen

Step 3: Click Next to start copying the program files to your computer.

This step may take a few minutes to install.

(Sample Image) Installation files copying screen

La pagina sta caricando ...

Toshiba dynadock PA3542 Manuale utente

Questo manuale è adatto anche per

Toshiba dynadock PA3542 Manuale utente

in altre lingue

Documenti correlati

Altri documenti