LD Systems U500 CC Manuale utente

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

U500 SERIES

TRUE DIVERSITY WIRELESS SYSTEM

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

PREVENTIVE MEASURES 3-4

INTRODUCTION 4

SCOPE OF DELIVERY 5

CONNECTIONS, CONTROLS AND INDICATORS 5-7

BELTPACK MINI-XLR PIN ASSIGNMENT 7-8

RECEIVER OPERATION 8-10

TRANSMITTER OPERATION 11-12

BATTERY REPLACEMENT 12

TROUBLESHOOTING 13

OPTIONAL ACCESSORIES 13-14

SPECIFICATIONS 14-16

MANUFACTURER´S DECLARATIONS 16

DEUTSCH

SICHERHEITSHINWEISE 17-18

EINFÜHRUNG 18

LIEFERUMFANG 19

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 19-21

BELEGUNG MINI-XLR-ANSCHLUSS (TASCHENSENDER) 21-22

BEDIENUNG EMPFÄNGER 22-25

BEDIENUNG SENDER 25-26

BATTERIEWECHSEL 26

FEHLERSUCHE 27

OPTIONALES ZUBEHÖR 27-28

TECHNISCHE DATEN 28-30

HERSTELLERERKLÄRUNGEN 30

FRANCAIS

MESURES PRÉVENTIVES 31-32

INTRODUCTION 32

CONTENU DU CARTON 33

CONNECTEURS, CONTRÔLES ET INDICATEURS 33-35

BROCHAGE TRANSMETTEUR CEINTURE MINI-XLR 35-36

UTILISATION DU RÉCEPTEUR 36-39

UTILISATION DE L’ÉMETTEUR 39-40

REMPLACEMENT DES PILES 40

EN CAS DE PROBLÈME 41

ACCESSOIRES OPTIONNELS 41-42

CARACTÉRISTIQUES TECHNIQUES 42-44

DECLARATIONS 44

ESPAÑOL

MEDIDAS DE SEGURIDAD 45-46

INTRODUCCIÓN 46

ELEMENTOS SUMINISTRADOS 47

CONEXIONES, CONTROLES E INDICADORES 47-49

PINEADO DEL MINI-XLR DE LA PETACAA 49-50

USO DEL RECEPTOR 50-52

USO DEL TRANSMISOR 53-54

SUSTITUCIÓN DE LAS PILAS 54

SOLUCIÓN DE PROBLEMAS 55

ACCESORIOS OPCIONALES 55-56

CARACTERÍSTICAS TÉCNICAS 56-58

DECLARACIÓN DEL FABRICANTE 58

POLSKI

ŚRODKI OSTROŻNOŚCI 59-60

WPROWADZENIE 60

ZAKRES DOSTAWY 61

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 61-63

UKŁAD STYKÓW WEJŚCIA MINI-XLR W

NADAJNIKU BELTPACK 63-64

OBSŁUGA ODBIORNIKA 64-66

INSTRUKCJA NADAJNIKA 67-68

WYMIANA BATERII 68

WYSZUKIWANIE BŁĘDÓW 69

AKCESORIA OPCJONALNE 69-70

SPECYFIKACJE 70-72

DEKLARACJE PRODUCENTA 72

ITALIANO

MISURE PRECAUZIONALI 73-74

INTRODUZIONE 74

IN DOTAZIONE 75

CONNESSIONI, COMANDI E INDICATORI 75-77

ASSEGNAZIONE PIN BELTPACK MINI-XLR 77-78

USO DEL RICEVITORE 78-80

USO DEL TRASMETTITORE 81-82

SOSTITUZIONE DELLE BATTERIE 82

RICERCA ERRORI 83

ACCESSORI OPZIONALI 83-84

DATI TECNICI 84-86

DICHIARAZIONI DEL PRODUTTORE 86

3

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

You‘ve made the right choice!

We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience

as a manufacturer of high-quality audio products. Please read this User‘s Manual carefully, so that you can begin making optimum use of

your LD Systems product quickly.

You can ﬁnd more information about LD-SYSTEMS at our Internet site WWW.LD-SYSTEMS.COM

PREVENTIVE MEASURES

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufﬁciently stable and compatible stands and/or mounts (for ﬁxed installations). Make certain that wall mounts are properly installed and

secured. Make certain that the equipment is installed securely and cannot fall down.

7. During installation, observ e the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always

installed so that is cooled sufﬁciently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the

special instructions noted below. Do not expose this equipment to ﬂammable materials, ﬂuids or gases. Avoid direct sunlight!

12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers ﬁlled with liquids, such as vases or

drinking vessels, on the equipment.

13. Make certain that objects cannot fall into the device.

14. Use this equipment only with the accessories recommended and intended by the manufacturer.

15. Do not open or modify this equipment.

16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.

17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.

18. If your equipment is no longer functioning properly, if ﬂuids or objects have gotten inside the equipment or if it has been damaged in anot

her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by

authorized, qualiﬁed personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS

22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective

ground. Never deactivate the protective ground of a power cord.

23. If the equipment has been exposed to strong ﬂuctuations in temperature (for example, after transport), do not switch it on immediately.

Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.

24. Before connecting the equipment to the power outlet, ﬁrst verify that the mains voltage and frequency match the values speciﬁed on the

equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the

mains power values match. If the included power cord or power adapter does not ﬁt in your wall outlet, contact your electrician.

25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power

adapter and the equipment connector.

26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the

equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and

power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter

with wet hands.

27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of

the equipment.

28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an

authorised service centre.

29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.

30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-

moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries

and/or other damage. For this reason, always be careful when laying cables.

31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of

disuse.

CAUTION:

To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts

inside. Maintenance and repairs should be exclusively carried out by qualiﬁed service personnel.

4

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an

electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for a

cool-down period of at least 10 minutes before handling or transporting the device.

CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!

This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident

prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.

Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)

that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to

volumes in excess of 90 dB.

INTRODUCTION

The radio transmission systems of the LD U500 Series offer professional performance and features including the automatic channel search

and the convenient one-touch infrared synchronisation for easy set-up. With switchable RF power, pilot tone transmission, and a selection of

dynamic and condenser microphones, U500 systems deliver excellent sound with advanced dynamics.

• Wireless True Diversity UHF microphone system

• Automatic channel scan for interference-free operation

• Frequency sync via infrared technology

• Individual user name

• Pilot tone for noise-free transmission

• Adjustable squelch

• Switchable transmission power (2, 10, or 30 mW)

• Hand-held and belt pack transmitter with comfortable Gain setting

• Mechanically decoupled capsules

• High-contrast OLED graphics display

• Simultaneous operation of up to 4 systems (LDU518) /up to 6 systems (LDU508 and LDU506UK) / up to 12 systems (LDU505 and LDU506)

The use of wireless microphone systems may require a license according to country-speciﬁc regulations. Please contact your local appropri-

ate authority for more information.

5

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

SCOPE OF DELIVERY

Scope of delivery

LDU5xxHHC: Single receiver plus hand-held transmitter and condenser capsule (cardioid), power supply, 2 x BNC antennas, audio cable, 2 x

AA batteries, carrying case, instructions

LDU5xxHHD: Single receiver plus hand-held transmitter and dynamic capsule (cardioid), power supply, 2 x BNC antennas, audio cable, 2 x

AA batteries, carrying case, instructions

LDU5xxBPH: Single receiver plus hand-held transmitter and headset (black), power supply, 2 x BNC antennas, audio cable, 2 x AA batteries,

carrying case, instructions

LDU5xxBPHH: Single receiver plus hand-held transmitter and headset (skin coloured), power supply, 2 x BNC antennas, audio cable, 2 x AA

batteries, carrying case, instructions

LDU5xxBPG: Single receiver plus hand-held transmitter and guitar cable, power supply, 2 x BNC antennas, audio cable, 2 x AA batteries,

carrying case, instructions

LDU5xxBPL: Single receiver plus hand-held transmitter and lavalier microphone, power supply, 2 x BNC antennas, audio cable, 2 x AA

batteries, carrying case, instructions

LDU5xxBPW: Single receiver plus hand-held transmitter and clip microphone for brass instruments, power supply, 2 x BNC antennas, audio

cable, 2 x AA batteries, carrying case, instructions

LDU5xxHHC2: Dual receiver plus 2 x hand-held transmitter and condenser capsule (cardioid), power supply, 2 x BNC antennas, audio cable,

4 x AA batteries, carrying case, rack kit, instructions

LDU5xxHHD2: Dual receiver plus 2 x hand-held transmitter and dynamic capsule (cardioid), power supply, 2 x BNC antennas, audio cable, 4

x AA batteries, carrying case, rack kit, instructions

LDU5xxBPH2: Dual receiver plus 2 x hand-held transmitter and headset (black), power supply, 2 x BNC antennas, audio cable, 4 x AA bat-

teries, carrying case, rack kit, instructions

LDU5xxBPHH2: Dual receiver plus 2 x hand-held transmitter and headset (skin coloured), power supply, 2 x BNC antennas, audio cable, 4 x

AA batteries, carrying case, rack kit, instructions

An extensive selection of suitable LD U500 single components and accessories can be found at WWW.LD-SYSTEMS.COM

CONNECTIONS, CONTROLS AND INDICATORS

1 2

5

3

4

9

8

1 2 3 4 5

6 7

2 3 4

9

8

RECEIVER

1

POWER

On / Off switch. Press and hold the switch for approx. 2 seconds to turn the device on or off.

2

DISPLAY

Multi-functional OLED graphics display for displaying information such as radio frequency, radio signal level and audio signal level. Also

indicates the menu items in order to adjust system settings as desired.

3

MENU

Combined pressure rotary encoder to access the Edit menu and to select and edit individual menu items.

4

VOL

Rotary encoder to adjust the audio signal volume of the audio outputs. As soon as volume changes are made, the volume setting will be

shown immediately on the display (VOLUME 00 - 100). After approximately 3 seconds of inactivity, the display will automatically return to to

the main screen.

5

Infrared interface for synchronising the relevant system settings of the receiver and the transmitter (e.g. transmission frequency).

6

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

6

HEADPHONE OUTPUT

6.3 mm jack socket for connecting a headphone (dual receiver only).

7

HEADPHONE VOLUME LEVEL

Drehregler zum Einstellen der Kopfhörerlautstärke (nur Doppelempfänger).

8

Device for attaching the antennas for rack installation. Remove the covers, attach the BNC adapter to the front panel and connect the BNC

antenna connectors (Fig. 11, dual receiver) to the BNC adapters on the front panel (short antenna cable and BNC adapter included). Now, the

antennas can be attached to the front of the receiver.

9

Screw holes for 19” rack mounting.

12 13 14 11 11

11 15 16 17 12 13 14 12 13 14 1110

10

DC SOCKET

Low-voltage socket for the power supply of the device. (Single receiver: DC 12V Plus internal/ 500 mA, Dual receiver: DC 12 V Plus internal/

1000 mA). Please only use the power adapter included.

11

ANTENNA A/B

BNC antenna connector A and B. For optimal reception, please connect the supplied antenna to the connectors A and B and point them

upward in “V” formation.

12

BALANCED OUTPUT

Balanced audio output with 3-pin XLR socket.

13

UNBALANCED OUTPUT

Unbalanced audio output with 6.3 mm jack socket.

14

INSTRUMENT / LINE

Level and impedance adjustment to instruments or line inputs for the unbalanced jack output. Using a suitable tool (e.g. a ball point pen), set

the switch to the down position INSTRUMENT, when connecting the receiver to the input of an instrument ampliﬁer (guitar ampliﬁer, bass

ampliﬁer) and to the opposite position LINE, when connecting to the line input of a mixer or ampliﬁer

15

BALANCED OUTPUT MIX OUT

Balanced audio output with 3-pin XLR socket (dual receiver only, signals from channels 1 and 2 are mixed).

16

UNBALANCED OUTPUT MIX OUT

Unbalanced audio output with 6.3 mm jack socket (dual receiver only, signals from channels 1 and 2 are mixed).

17

INSTRUMENT / LINE MIX OUT

Level and impedance adjustment to instruments or line inputs for the unbalanced jack output MIX OUT (dual receiver only). Using a suitable

tool (e.g. a ball point pen), set the switch to the down position INSTRUMENT, when connecting the receiver to the input of an instrument

ampliﬁer (guitar ampliﬁer, bass ampliﬁer) and to the opposite position LINE, when connecting to the line input of a mixer or ampliﬁer.

7

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

HANDHELD TRANSMITTER

22

21

20

19 18

BELT PACK TRANSMITTER

18

24

21

22

20 19

23

18

ON / OFF

On / Off switch. Set the switch to the ON position to turn the receiver on, and to the OFF position to turn it off.

19

DISPLAY

Multi-functional OLED graphics display for displaying the frequency group and channel, the username and battery status. Also indicates the

menu items in order to adjust transmitter settings as desired.

20

Infrared interface for synchronising the relevant system settings with the receiver (e.g. transmission frequency).

21

MENU / SEL

Switch to access the Edit menu and to select individual menu items.

22

Switch to edit the individual menu options on the Edit menu.

23

ANTENNA

Interchangeable antenna of the belt pack transmitter. For optimal reception, please do not obstruct or bend (belt pack transmitter only).

24

INPUT

3-pin mini XLR socket to connect a headset, lavalier or instrument microphone, as well as a guitar cable (belt pack transmitter only).

BELTPACK MINI-XLR PIN ASSIGNMENT

1

2

3

MINI-XLR

sleeve tip

6,3 mm jack

Guitar & Bass and other high impendance sources.

8

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

1

2

3

MINI-XLR

Condenser with internal pull up resistor.

1

2

3

MINI-XLR

R

2,2k

Condenser without internal pull up resistor.

RECEIVER OPERATION

When operating the wireless transmission system, be sure to place the receiver in the line of sight of the transmitter. For optimal reception,

perform the automatic frequency search after switching on the receiver. Leave the corresponding transmitter off, but other radio systems

turned on, if necessary. For the operating steps, see FREQ AUTO RUN.

DISPLAY

After switching on the receiver, “WELCOME” appears for a short time, then the main screen displays the following information: individual

username, battery status, radio signal level (RF), active antenna (A / B), level of the audio signal, frequency group and channel (GR.xx and

CH.xx) and the radio frequency in MHz.

· Individual username

· Radio signal level and active antenna

· Frequency group and channel

Battery status of the transmitter

· Audio signal level / Peak (PK)

· Radio frequency in MHz

IR SYNC RUN

To synchronize the transmitter with the radio frequency set in the receiver and the individual username, bring the infrared port of the trans-

mitter in direct visual contact with the infrared port of the receiver (distance approx. 10 cm) and turn on the transmitter. Now press the pres-

sure rotary encoder of the receiver (MENU) to access the Edit menu and select the menu item IR SYNC RUN by rotating the encoder (light

background). Press again on MENU to initiate the synchronization process. After a few seconds, the process is completed and the display of

the transmitter switches for a short time to “IR SYNC ”, conﬁrming successful synchronization. To cancel the operation, press MENU. Press

brieﬂy(!) on POWER to return directly to the main display. After about 10 seconds of inactivity, the main display is automatically shown.

FREQ AUTO RUN

Automatic frequency search (frequency scan) to determine an interference-free radio frequency in the current environment and to allow

for optimal reception. For this purpose, leave the corresponding transmitter off, but other radio systems turned on, if necessary. Press the

pressure rotary encoder (MENU) to access the Edit menu and select the menu item FREQ AUTO RUN by rotating the encoder (light back-

ground). To initiate the process, press again on MENU. Progress is now indicated on the display by an animation and the scanning process

is completed after approx. 30 seconds (to cancel, press MENU). The resulting frequency is automatically enabled and, as in “IR SYNC RUN”,

you can now switch on the transmitter and synchronize it with the receiver. Press brieﬂy(!) on POWER to return directly to the main display.

After about 10 seconds of inactivity, the main display is automatically shown.

9

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

GROUP

Menu item to adjust the frequency group. The LD U500 wireless system has 8 frequency groups, which can be selected as desired. Press

the pressure rotary encoder (MENU) to access the Edit menu and select the menu item GROUP by rotating the encoder (light background).

Press MENU again and select one of the groups 01 to 08 by rotating the encoder. To conﬁrm, press MENU. Pressing MENU once more will

take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display. After about 10 seconds of

inactivity, the main display is automatically shown.

CHANNEL

Menu item to adjust the frequency channel. The LD U500 wireless system has 8 frequency groups featuring 12 channels each, which can

be selected as desired. Press the pressure rotary encoder (MENU) to access the Edit menu and select the menu item CHANNEL by rotating

the encoder (light background). Press MENU again and select one of the channels 01 to 12 by rotating the encoder. To conﬁrm, press MENU.

Pressing MENU once more will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display.

After about 10 seconds of inactivity, the main display is automatically shown.

FREQ MAN

Manual adjustment of the radio frequency in 25 kHz increments. Press the pressure rotary encoder (MENU) to access the Edit menu and

select the menu item FREQ MAN by rotating the encoder (light background). Press MENU and adjust the frequency in the MHz range by

rotating the encoder. Press MENU again and adjust the frequency in the kHz range in 25 kHz increments by rotating the encoder. To conﬁrm,

press MENU. Pressing MENU once more will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to

the main display. After about 10 seconds of inactivity, the main display is automatically shown. The display will now show U for user under

group GR. and CH.1 under channel.

NAME

To clearly assign transmitters and receivers to a speciﬁc performer, you have the ability to show names, numbers, or characters on the

display. Press the pressure rotary encoder (MENU) to access the Edit menu and select the menu item NAME by rotating the encoder (light

background). Press MENU and then, as desired, select the letter, number or symbol for the ﬁrst of the 8 digits provided by rotating the

encoder and conﬁrming with MENU; now, the second digit can be set as desired, etc.. Once the last digit has been conﬁrmed, pressing

MENU again will take you to a higher level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display. After about

10 seconds of inactivity, the main display is automatically shown. In addition to the radio frequency, the name is also transferred to the

transmitter when synchronizing.

PILOT TONE

The pilot tone feature protects a wireless microphone system against interference of unwanted signals, for example from other radio

equipment. The transmitter adds a second inaudible signal, the pilot tone, to the signal to be transmitted. The receiver identiﬁes this as the

matching pilot tone and frees the corresponding signal. Signals without pilot tone remain muted. Press the pressure rotary encoder (MENU)

to access the Edit menu and select the menu item PILOT TONE by rotating the encoder (light background). Press again on MENU and using

the encoder, select ON, for initiating pilot tone (right turn), or OFF for pilot tone equipment switched off (turn left). To conﬁrm, press MENU.

Pressing MENU once more will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display.

After about 10 seconds of inactivity, the main display is automatically shown.

10

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

SQUELCH

The squelch control prevents unwanted background noise when the transmitter is turned off. In addition, sudden background noises are

suppressed when the signal transmitted from the transmitter to the receiver is not strong enough (for instance because of excessive

distance) Set the squelch control (with the transmitter switched off) to the lowest setting, which still effectively suppresses background

noises. In unfavourable conditions, in the “HIGH” setting, the transmission range may decrease. Press the pressure rotary encoder (MENU)

to access the Edit menu and select the menu item SQUELCH by rotating the encoder (light background). Press MENU again and select the

optimum setting for your application by rotating the encoder (LOW = low, MID= mid and HIGH = high threshold). To conﬁrm, press MENU.

Pressing MENU once more will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display.

After about 10 seconds of inactivity, the main display is automatically shown.

BRIGHTNESS

Menu item to adjust the brightness of the display illumination. Press the pressure rotary encoder (MENU) to access the Edit menu and

select the menu item BRIGHTNESS by rotating the encoder (light background). Press MENU again and select the optimum setting for your

application by rotating the encoder (LOW = low, MID= mid and HIGH = high brightness). To conﬁrm, press MENU. Pressing MENU once more

will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly to the main display. After about 10 seconds of

inactivity, the main display is automatically shown.

PANEL LOCK

To protect the receiver against accidental and unauthorised operation, it is possible to initiate an automatic locking of the controls. Press the

pressure rotary encoder (MENU) to access the Edit menu and select the menu item PANEL LOCK by rotating the encoder (light background).

Press again on MENU and using the encoder, select ON, for initiating the automatic lock (right turn), or OFF to switch it off (turn left). To con-

ﬁrm, press MENU. Pressing MENU once more will take you up one level in the menu structure. Press brieﬂy(!) on POWER to return directly

to the main display. If the automatic lock is activated, after approx. 10 seconds, “DISPLAY IS LOCKED” is displayed for a short time and also

if one of the controls is activated; a change to the settings of the receiver via the control elements is then not possible. Press and hold the

pressure rotary encoder for approx. 3 seconds to unlock the control elements (“DISPLAY IS UNLOCKED” is displayed for about 1 second).

EXIT

To exit the Edit menu and return to the main display, select EXIT (light background) by rotating the pressure rotary encoder and press

MENU. Alternatively, press brieﬂy(!) on POWER to return directly to the main display. After about 10 seconds of inactivity, the main display is

automatically shown.

BATTERY STATUS

The battery status of the corresponding transmitter will appear on the display and is constantly updated. When the battery is fully charged,

the icon ( = approx. 70%, = approx. 30%) will appear. As soon as the icon for “low battery” is displayed, the

display changes to “LOW BATTERY” and shows approximately every 5 seconds. Replace the batteries immediately.

11

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

TRANSMITTER OPERATION

MAIN DISPLAY

After switching on the transmitter, the main screen displays the following information: username, frequency group and channel (GR.xx

and CH.xx) and battery status. Remove the battery compartment cover on the transmitter to release the controls SEL and arrow buttons

(hand-held transmitter: remove the screwable cover shell by rotating it to the left, belt pack transmitter: pull cover shell by pressing on the

markings on the sides of the housing). Now press the arrow button, and the radio frequency, gain and transmission power are displayed

(back with arrow button).

GAIN

To avoid distortions and to adjust the transmitter optimally to the input audio signal, it is possible to adjust the audio levels in 3dB incre-

ments from 0dB to -27dB. Open the battery compartment cover as previously described to reveal the controls. Press SEL to access the

Edit menu and press SEL repeatedly, if necessary, to select the menu item GAIN (light background). Now lower the audio level if necessary

by repeatedly pressing the arrow button until you have no more distortion and the peak indicator AF PK in the display of the receiver goes

out (watch out for peak levels). To exit the menu item, press SEL, call up the menu item EXIT by pressing SEL repeatedly if necessary, and

conﬁrm by pressing the arrow button. After approximately 10 seconds of inactivity, the display will automatically return to the main screen.

RF POWER

Adjust the output power of the transmitter according to the application (recommendation: outdoors = 30mW, stage = 10mW, conference

setting = 2mW). Open the battery compartment cover as previously described to reveal the controls. Press SEL to access the Edit menu and

press SEL repeatedly, if necessary, to select the menu item RF POWER (light background). Now, using the arrow keys, select the desired

output power (30mW, 10mW, 2mW - in the frequency range of 863 – 865 MHz, the output power is automatically reduced to 10 mW in

accordance with legal requirements). To exit the menu item, press SEL, call up the menu item EXIT by pressing SEL repeatedly if necessary,

and conﬁrm by pressing the arrow button. After approximately 10 seconds of inactivity, the display will automatically return to the main

screen.

EXIT

In order to exit the Edit menu and return to the main display, call up the menu item EXIT and conﬁrm by pressing the arrow button. After

approximately 10 seconds of inactivity, the display will automatically return to the main screen.

BATTERY STATUS

The battery status of the transmitter will appear in the display and is constantly updated. When the battery is fully charged, the icon

( = approx. 70%, = approx. 30%) will appear. As soon as the icon for “low battery” is displayed, the display changes to

“LOW BATTERY” and shows approximately every 5 seconds. Replace the batteries immediately.

12

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

ATTACHING THE PACK TRANSMITTER

Attach the transmitter to a belt or strap as shown below.

BATTERY REPLACEMENT

Open the battery compartment of the hand-held transmitter by turning the battery compartment cover counter-clockwise and pull it from

the housing. Remove the used batteries and insert new batteries (AA, Mignon) as shown on the illustration inside the battery compartment.

Replace the battery compartment cover on the housing and close the battery compartment by turning clockwise. If the transmitter is not in

use for a long period of time, remove the batteries from the battery compartment on the transmitter to avoid damage caused by defective

batteries.

Open the battery compartment of the hand-held transmitter by pressing on both markings on the sides of the battery compartment cover

(Fig. A) and pull it away until it stops. Remove the used batteries and insert new batteries (AA, Mignon) as shown on the illustration inside

the battery compartment. Slide the battery compartment cover back onto the housing until the cover clicks into place. If the transmitter

is not in use for a long period of time, remove the batteries from the battery compartment on the transmitter to avoid damage caused by

defective batteries.

A

13

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

PROBLEM DISPLAY SOLUTION

No audio signal or

low level

Receiver: Reception is not displayed on antenna A or B. Verify that the transmitter is turned on.

Check the batteries in the transmitter.

Receiver: Display light is off Check the power supply in the transmitter.

Receiver: Reception is not displayed on antenna A or B.

Transmitter: Device is turned on. Charge status of the

batteries is ok.

Check whether radio frequency of transmitter and

receiver match.

Check the transmission output.

Reduce the distance between transmitter and receiver.

Make sure that there is a direct line of sight between the

transmitter and receiver.

Make sure that the antennas of the receiver are aligned

upward and into a V-shape.

Reduce the amount of noise reduction (SQUELCH)

Receiver: Neither antenna A nor antenna B LED is

displayed.

Increase the signal level or check the GAIN setting on

the transmitter.

Distortion and

interference

Receiver: Radio signal is displayed Remove possible sources of interference (digital devices,

other wireless systems).

Increase the level of noise reduction (MUTE level) on the

receiver.

Distorted sound Transmitter and Receiver: "LOW BATTERY" is displayed.

Receiver: AF PK peak indicator is displayed on the

receiver display.

Replace the batteries in the transmitter.

Increase the signal level or lower the audio level GAIN on

the transmitter.

TROUBLESHOOTING

OPTIONAL ACCESSORIES

LDU500CH - Microphone head with condenser capsule and hyper cardioid directivity (matt black)

LDU500DH - Microphone head with dynamic capsule and hyper cardioid directivity (matt black)

LDU500CC - Microphone head with condenser capsule and hyper cardioid directivity (matt silver)

LDU500DC - Microphone head with dynamic capsule and hyper cardioid directivity (matt silver)

LDU500RK - 19” rack installation kit for mounting a single receiver (2 rack brackets, 2 BNC adapters, 2 short antenna cables and 1 set of

screws included).

LDU500RK2 - 19” rack installation kit for mounting a dual receiver (2 rack brackets, 2 connectors and 1 set of screws included).

14

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

Receiver

Model name: LDU50xR LDU50xR2

Receiver type: true diversity

Modulation: FM

Frequency range:

823 - 832 MHz & 863 - 865 MHz (LDU508), 584 - 607 MHz (LDU505), 655 - 679 MHz (LDU506),

604 - 614 MHz (LDU506UK), 1785 - 1800 MHz (LDU518)

Channels: 96 (8 x 12)

Groups: 8

Antenna connectors: 2 x BNC

Frequency response: 30 - 16.000 Hz

Noise Reduction: adjustable squelch

THD: <0.1%

Signal-to-noise ratio: >100dB

Balanced output: XLR 2 x XLR

Balanced mix output: XLR

Unbalanced output: 6.3 mm jack 2x 6.3mm jack

Unbalanced mix output: 6.3 mm jack

Headphones output: 6.3 mm stereo jack

Audio output level (balanced): +10dBu

Audio output level

(unbalanced):

+6dBV / 0dBV (Switchable Line / Instrument)

Controls: POWER on/off, MENU push-turn-control, VOL

Volume control, switch INSTRUMENT/LINE

POWER on/off, 2x MENU push-turn-control, 2x

VOL Volume control, 2x switch INSTRUMENT/

LINE, headphones volume control

Indicators: multifunctional OLED-graphic display, 2 x multifunctional OLED-graphic display

Operating voltage: 12V DC, 500 mA 12V DC, 1000 mA

Operating temperature range: 5°C … 40°C

Relative humidity in operation: 20% … 80% (non condensing)

Dimensions (W x H x D): 212 x 44 x 159mm 484 x 44 x 200mm

Weight: 0,95kg 2,05 kg

Accessories included: power adapter, 2 x antenna, audio cable power adapter, 2 x antenna, audio cable, rack

kit

Features: channel scan function, infrared frequency synchronisation, pilot tone

1 2 3

1

MOUNTING

Screw the connectors (receiver A right, receiver B left).

2

Place both receivers together and screw into place.

3

Screw the rack brackets (receiver A right, receiver B left).

An extensive selection of suitable LD U500 wireless systems and further accessories can be found at WWW.LD-SYSTEMS.COM

SPECIFICATIONS

15

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

Handheld transmitter

Model name: LDU50xMD LDU50xMC

Modulation: FM

Frequency range:

823 - 832 MHz & 863 - 865 MHz (LDU508), 584 - 607 MHz (LDU505), 655 - 679 MHz (LDU506),

604 - 614 MHz (LDU506UK), 1785 - 1800 MHz (LDU518)

Channels: 96 (8 x 12)

Groups: 8

Microphone type: dynamic condenser

Polar pattern: cardioid cardioid

Frequency response: 60 - 16.000 Hz

THD: <0.2% @ 1kHz

Signal-to-noise ratio: >95 dB

RF output power: 2mW, 10mW, 30mW switchable and depending on the RF -Range

Controls: Power on/off, Select, Arrow button

Indicators: multifunctional OLED-graphic display

Power supply: 2 x AA battery

Operating time: up to 10 h (depending on batteries)

Operating temperature range: 5°C … 40°C

Relative humidity range in operation: 20% … 80% (non condensing)

Dimensions (L x Ø): 257 x 51mm 257 x 50mm

Weight (without batteries): 0,2 kg 0,21kg

Accessories included: 2 x AA battery

Features: infrared frequency synchronisation

Bodypack transmitter

Model name: LDU50xBP

Modulation: FM

Frequency range:

823 - 832 MHz & 863 - 865 MHz (LDU508), 584 - 607 MHz (LDU505), 655 - 679 MHz (LDU506),

604 - 614 MHz (LDU506UK), 1785 - 1800 MHz (LDU518)

Channels: 96 (8 x 12)

Groups: 8

Input: 3-pin mini-XLR (Low-Z/High-Z)

Frequency response: 30 - 16.000 Hz

THD: <0.1% @ 1kHz

Signal-to-noise ratio: >90 dB

RF output power: 2mW, 10mW, 30mW switchable and depending on the RF -Range

Controls: Power on/off, Select, Arrow button

Indicators: multifunctional OLED-graphic display

Power supply: 2 x AA batteries

Operating time: up to 10 h (depending on batteries)

Operating temperature range: 5°C … 40°C

Relative humidity range in operation: 20% … 80% (non condensing)

Dimensions (W x H x D): 65 x 86 x 23 mm

Weight (without batteries): 0,09 kg

Accessories included: 2 x AA battery

Features: infrared frequency synchronisation

16

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

MANUFACTURER´S DECLARATIONS

MANUFACTURER‘S WARRANTY & LIMITATIONS OF LIABILITY

You can ﬁnd our current warranty conditions and limitations of liability at: http://www.adamhall.com/media/shop/downloads/documents/

manufacturersdeclarations.pdf. To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu

Anspach / Email: [email protected] / +49 (0)6081 / 9419-0. To enquire about the current declaration of conformity, please contact

[email protected].

CORRECT DISPOSAL OF THIS PRODUCT

(Valid in the European Union and other European countries with a differentiated waste collection system) This symbol on the product,

or on its documents indicates that the device may not be treated as household waste. This is to avoid environmental damage or

personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste and have it recycled to

promote sustainable economic activity. Household users should contact either the retailer where they purchased this product, or their local

government ofﬁce, for details on where and how they can recycle this item in an environmentally friendly manner. Business users should

contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial

waste for disposal.

Microphones

Model name: LDWS100MH1 LDWS100MH3 LDWS100ML LDWS1000MW

Microphone type: headset headset lavalier microphone wind instrument

microphone

Capsule:

back-electret con-

denser

back-electret con-

denser

back-electret con-

denser

back-electret con-

denser

Polar pattern: cardioid cardioid cardioid cardioid

Frequency response: 20 - 20.000 Hz 70 - 16.000 Hz 20 - 20.000 Hz 50 - 18.000 Hz

Connector: 3-pin mini-XLR 3-pin mini-XLR 3-pin mini-XLR 3-pin mini-XLR

Accessories included: foam windscreen foam windscreen foam windscreen foam windscreen

Features: skin coloured

Model name: LDU500CC LDU500DC LDU500CH LDU500DH

Microphone type: Microphone head for

U500 handheld

Microphone head for

U500 handheld

Microphone head for

U500 handheld

Microphone head for

U500 handheld

Capsule:

back-electret con-

denser dynamic

back-electret con-

denser dynamic

Polar pattern: cardioid cardioid hyper cardioid hyper cardioid

Connector:

LDU500 screw

connection

LDU500 screw

connection

LDU500 screw

connection

LDU500 screw

connection

Colour: matt silver matt silver matt black matt black

Features: low noise -FET

impedance converter,

customized shock

mount, gold contacts

shock mount, gold

contacts

low noise -FET

impedance converter,

customized shock

mount, gold contacts

shock mount, gold

contacts

Guitar cable

Model name: LDU500GC

Connector 1: 3-pin mini-XLR

Connector 2: 6.3 mm jack

Length: 0.8 m

17

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

DEUTSCH

Sie haben die richtige Wahl getroffen!

Dieses Gerät wurde unter hohen Qualitätsanforderungen entwickelt und gefertigt, um viele Jahre einen reibungslosen Betrieb zu gewähr-

leisten. Dafür steht LD Systems mit seinem Namen und der langjährigen Erfahrung als Hersteller hochwertiger Audioprodukte. Bitte lesen

Sie diese Bedienungsanleitung sorgfältig, damit Sie Ihr neues Produkt von LD Systems schnell optimal einsetzen können.

Mehr Informationen zu LD SYSTEMS ﬁnden Sie auf unserer Internetseite WWW.LD-SYSTEMS.COM

SICHERHEITSHINWEISE

1. Lesen Sie diese Anleitung bitte sorgfältig durch.

2. Bewahren Sie alle Informationen und Anleitungen an einem sicheren Ort auf.

3. Befolgen Sie die Anweisungen.

4. Beachten Sie alle Warnhinweise. Entfernen Sie keine Sicherheitshinweise oder andere Informationen vom Gerät.

5. Verwenden Sie das Gerät nur in der vorgesehenen Art und Weise.

6. Verwenden Sie ausschließlich stabile und passende Stative bzw. Befestigungen (bei Festinstallationen). Stellen Sie sicher, dass Wandhal-

terungen ordnungsgemäß installiert und gesichert sind. Stellen Sie sicher, dass das Gerät sicher installiert ist und nicht herunterfallen kann.

7. Beachten Sie bei der Installation die für Ihr Land geltenden Sicherheitsvorschriften.

8. Installieren und betreiben Sie das Gerät nicht in der Nähe von Heizkörpern, Wärmespeichern, Öfen oder sonstigen Wärmequellen. Sorgen

Sie dafür, dass das Gerät immer so installiert ist, dass es ausreichend gekühlt wird und nicht überhitzen kann.

9. Platzieren Sie keine Zündquellen wie z.B. brennende Kerzen auf dem Gerät.

10. Lüftungsschlitze dürfen nicht blockiert werden.

11. Betreiben Sie das Gerät nicht in unmittelbarer Nähe von Wasser. Bringen Sie das Gerät nicht mit brennbaren Materialien, Flüssigkeiten

oder Gasen in Berührung. Direkte Sonneneinstrahlung vermeiden!

12. Sorgen Sie dafür, dass kein Tropf- oder Spritzwasser in das Gerät eindringen kann. Stellen Sie keine mit Flüssigkeit gefüllten Behältnisse

wie Vasen oder Trinkgefäße auf das Gerät.

13. Sorgen Sie dafür, dass keine Gegenstände in das Gerät fallen können.

14. Betreiben Sie das Gerät nur mit dem vom Hersteller empfohlenen und vorgesehenen Zubehör.

15. Öffnen Sie das Gerät nicht und verändern Sie es nicht.

16. Überprüfen Sie nach dem Anschluss des Geräts alle Kabelwege, um Schäden oder Unfälle, z. B. durch Stolperfallen zu vermeiden.

17. Achten Sie beim Transport darauf, dass das Gerät nicht herunterfallen und dabei möglicherweise Sach- und Personenschäden verursachen

kann.

18. Wenn Ihr Gerät nicht mehr ordnungsgemäß funktioniert, Flüssigkeiten oder Gegenstände in das Geräteinnere gelangt sind, oder das

Gerät anderweitig beschädigt wurde, schalten Sie es sofort aus und trennen es von der Netzsteckdose (sofern es sich um ein aktives Gerät

handelt). Dieses Gerät darf nur von autorisiertem Fachpersonal repariert werden.

19. Verwenden Sie zur Reinigung des Geräts ein trockenes Tuch.

20. Beachten Sie alle in Ihrem Land geltenden Entsorgungsgesetze. Trennen Sie bei der Entsorgung der Verpackung bitte Kunststoff und

Papier bzw. Kartonagen voneinander.

21. Kunststoffbeutel müssen außer Reichweite von Kindern aufbewahrt werden.

BEI GERÄTEN MIT NETZANSCHLUSS

22. ACHTUNG: Wenn das Netzkabel des Geräts mit einem Schutzkontakt ausgestattet ist, muss es an einer Steckdose mit Schutzleiter

angeschlossen werden. Deaktivieren Sie niemals den Schutzleiter eines Netzkabels.

23. Schalten Sie das Gerät nicht sofort ein, wenn es starken Temperaturschwankungen ausgesetzt war (beispielsweise nach dem Transport).

Feuchtigkeit und Kondensat könnten das Gerät beschädigen. Schalten Sie das Gerät erst ein, wenn es Zimmertemperatur erreicht hat.

24. Bevor Sie das Gerät an die Steckdose anschließen, prüfen Sie zuerst, ob die Spannung und die Frequenz des Stromnetzes mit den auf

dem Gerät angegebenen Werten übereinstimmen. Verfügt das Gerät über einen Spannungswahlschalter, schließen Sie das Gerät nur an die

Steckdose an, wenn die Gerätewerte mit den Werten des Stromnetzes übereinstimmen. Wenn das mitgelieferte Netzkabel bzw. der mitgelie-

ferte Netzadapter nicht in Ihre Netzsteckdose passt, wenden Sie sich an Ihren Elektriker.

25. Treten Sie nicht auf das Netzkabel. Sorgen Sie dafür, dass spannungsführende Kabel speziell an der Netzbuchse bzw. am Netzadapter

und der Gerätebuchse nicht geknickt werden.

26. Achten Sie bei der Verkabelung des Geräts immer darauf, dass das Netzkabel bzw. der Netzadapter stets frei zugänglich ist. Trennen Sie

das Gerät stets von der Stromzuführung, wenn das Gerät nicht benutzt wird, oder Sie das Gerät reinigen möchten. Ziehen Sie Netzkabel und

Netzadapter immer am Stecker bzw. am Adapter und nicht am Kabel aus der Steckdose. Berühren Sie Netzkabel und Netzadapter niemals mit

nassen Händen.

27. Schalten Sie das Gerät möglichst nicht schnell hintereinander ein und aus, da sonst die Lebensdauer des Geräts beeinträchtigt werden

könnte.

28. WICHTIGER HINWEIS: Ersetzen Sie Sicherungen ausschließlich durch Sicherungen des gleichen Typs und Wertes. Sollte eine Sicherung

wiederholt auslösen, wenden Sie sich bitte an ein autorisiertes Servicezentrum.

29. Um das Gerät vollständig vom Stromnetz zu trennen, entfernen Sie das Netzkabel bzw. den Netzadapter aus der Steckdose.

30. Wenn Ihr Gerät mit einem verriegelbaren Netzanschluss bestückt ist, muss der passende Gerätestecker entsperrt werden, bevor er ent-

fernt werden kann. Das bedeutet aber auch, dass das Gerät durch ein Ziehen am Netzkabel verrutschen und herunterfallen kann, wodurch

Personen verletzt werden und/oder andere Schäden auftreten können. Verlegen Sie Ihre Kabel daher immer sorgfältig.

31. Entfernen Sie Netzkabel und Netzadapter aus der Steckdose bei Gefahr eines Blitzschlags oder wenn Sie das Gerät länger nicht

verwenden.

18

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

ACHTUNG

Entfernen Sie niemals die Abdeckung, da sonst das Risiko eines elektrischen Schlages besteht. Im

Inneren des Geräts beﬁnden sich keine Teile, die vom Bediener repariert oder gewartet werden können.

Lassen Sie Wartung und Reparaturen ausschließlich von qualiﬁziertem Servicepersonal durchführen.

Das gleichseitige Dreieck mit Blitzsymbol warnt vor nichtisolierten, gefährlichen Spannungen im Geräteinneren, die einen elektrischen

Schlag verursachen können.

Das gleichseitige Dreieck mit Ausrufungszeichen kennzeichnet wichtige Bedienungs- und Wartungshinweise.

Warnung! Dieses Symbol kennzeichnet heiße Oberﬂächen. Während des Betriebs können bestimmte Teile des Gehäuses heiß werden.

Berühren oder transportieren Sie das Gerät nach einem Einsatz erst nach einer Abkühlzeit von mindestens 10 Minuten.

ACHTUNG HOHE LAUTSTÄRKEN BEI AUDIOPRODUKTEN!

Dieses Gerät ist für den professionellen Einsatz vorgesehen. Der kommerzielle Betrieb dieses Geräts unterliegt den jeweils gültigen nationalen

Vorschriften und Richtlinien zur Unfallverhütung. Als Hersteller ist Adam Hall gesetzlich verpﬂichtet, Sie ausdrücklich auf mögliche Gesundheitsrisik-

en hinzuweisen. Gehörschäden durch hohe Lautstärken und Dauerbelastung: Bei der Verwendung dieses Produkts können hohe Schalldruckpegel

(SPL) erzeugt werden, die bei Künstlern, Mitarbeitern und Zuschauern zu irreparablen Gehörschäden führen können. Vermeiden Sie länger

anhaltende Belastung durch hohe Lautstärken über 90 dB.

EINFÜHRUNG

Die Funkübertragungssysteme der LD U500 Serie bieten professionelle Leistung und Funktionen einschließlich der automatischen Kanalsuche

und der bequemen One-Touch-Infrarot-Synchronisierung für einfache Einrichtung. Mit schaltbarer HF-Leistung, Pilotton-Übertragung und

einer Auswahl von dynamischen und Kondensatormikrofonen liefern U500 Systeme hervorragenden Klang mit erweiterter Dynamik.

• Drahtloses True Diversity UHF Mikrofon System

• Automatischer Kanal-Scan für interferenzfreie Funktion

• Frequenz-Sync via Infrarot-Technik

• Individueller Benutzername

• Pilot-Ton für störgeräuschfreie Übertragung

• Einstellbare Rauschsperre (Squelch)

• Schaltbare Sendeleistung (2, 10 oder 30 mW)

• Hand- und Taschensender mit komfortabler Gain-Einstellung

• Mechanisch entkoppelte Kapseln

• Kontrastreiches OLED-Graﬁkdisplay

• Simultaner Betrieb von bis zu 4 Systemen (LDU518) / bis zu 6 Systemen (LDU508 und DU506UK) / bis zu 12 Systemen (LDU505 und LDU506)

Die Verwendung von drahtlosen Mikrofonsystemen kann eine Genehmigung erfordern - je nach landesspeziﬁschen Bestimmungen. Bitte

kontaktieren Sie Ihre zuständigen Behörde für weitere Informationen.

19

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE

1 2

5

3

4

9

8

1 2 3 4 5

6 7

2 3 4

9

8

EMPFÄNGER

1

POWER

Ein- bzw. Ausschalter. Drücken und halten Sie den Taster für die Dauer von ca. 2 Sekunden, um das Gerät ein- bzw. auszuschalten.

2

DISPLAY

Ein- bzw. Ausschalter. Drücken und halten Sie den Taster für die Dauer von ca. 2 Sekunden, um das Gerät ein- bzw. auszuschalten.

3

MENU

Kombinierter Drück-Dreh-Geber, um in das Bearbeitungsmenü zu gelangen und die einzelnen Menüpunkte auszuwählen und zu editieren.

4

VOL

Dreh-Geber zum Einstellen der Lautstärke des an den Audio-Ausgängen anliegenden Audio-Signals. Sobald Lautstärkeänderungen vorge-

nommen werden, wird die Lautstärkeeinstellung augenblicklich im Display angezeigt (VOLUME 00 - 100). Nach ca. 3 Sekunden Inaktivität

kehrt das Display zur Hauptanzeige zurück.

5

Infrarot-Schnittstelle zum Synchronisieren der relevanten Systemeinstellungen des Empfängers mit dem Sender (z.B. Sendefrequenz).

6

KOPFHÖRERAUSGANG

6,3mm Klinkenbuchse zum Anschließen eines Kopfhörers (nur Doppelempfänger).

LIEFERUMFANG

LDU5xxHHC: Einzelempfänger plus Handsender und Kondensatorkapsel (cardioid), Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien,

Transportkoffer, Anleitung

LDU5xxHHD: Einzelempfänger plus Handsender und dynamischer Kapsel (cardioid), Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien,

Transportkoffer, Anleitung

LDU5xxBPH: Einzelempfänger plus Taschensender und Headset (schwarz), Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien, Trans-

portkoffer, Anleitung

LDU5xxBPHH: Einzelempfänger plus Taschensender und Headset (hautfarben), Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien,

Transportkoffer, Anleitung

LDU5xxBPG: Einzelempfänger plus Taschensender und Gitarrenkabel, Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien, Transportk-

offer, Anleitung

LDU5xxBPL: Einzelempfänger plus Taschensender und Lavalier-Mikrofon, Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA Batterien, Trans-

portkoffer, Anleitung

LDU5xxBPW: Einzelempfänger plus Taschensender und Clip-Mikrofon für Blasinstrumente, Netzteil, 2x BNC-Antennen, Audiokabel, 2x AA

Batterien, Transportkoffer, Anleitung

LDU5xxHHC2: Doppelempfänger plus 2x Handsender und Kondensatorkapsel (cardioid), Netzteil, 2x BNC-Antennen, Audiokabel, 4x AA Bat-

terien, Transportkoffer, Rack-Kit, Anleitung

LDU5xxHHD2: Doppelempfänger plus 2x Handsender und dynamischer Kapsel (cardioid), Netzteil, 2x BNC-Antennen, Audiokabel, 4x AA

Batterien, Transportkoffer, Rack-Kit, Anleitung

LDU5xxBPH2: Doppelempfänger plus 2x Taschensender und Headset (schwarz), Netzteil, 2x BNC-Antennen, Audiokabel, 4x AA Batterien,

Transportkoffer, Rack-Kit, Anleitung

LDU5xxBPHH2: Doppelempfänger plus 2x Taschensender und Headset (hautfarben), Netzteil, 2x BNC-Antennen, Audiokabel, 4x AA Batterien,

Transportkoffer, Rack-Kit, Anleitung

Eine umfangreiche Auswahl an LD U500 Einzelkomponenten und Zubehör ﬁnden Sie auf WWW.LD-SYSTEMS.COM

20

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

7

KOPFHÖRERLAUTSTÄRKE

Drehregler zum Einstellen der Kopfhörerlautstärke (nur Doppelempfänger).

8

Vorrichtung zum Anbringen der Antennen beim Rackeinbau. Entfernen Sie die Abdeckkappen, befestigen die BNC-Adapter an der Frontblen-

de und verbinden die BNC-Antennenanschlüsse (Abb. 11, Doppelempfänger) mit den BNC-Adaptern in der Frontblende (kurze Antennenka-

bel und BNC-Adapter im Lieferumfang). Nun können die Antennen an der Vorderseite des Empfängers befestigt werden.

9

Schraublöcher für den 19“ Rackeinbau.

10

DC BUCHSE

Kleinspannungsbuchse für die Spannungsversorgung des Geräts (Einzelempfänger: DC 12V Plus innen, 500mA, Doppelempfänger: DC 12V

Plus innen, 1000mA). Verwenden Sie bitte ausschließlich den mitgelieferten Netzadapter.

12 13 14 11 11

11 15 16 17 12 13 14 12 13 14 1110

10

11

ANTENNE A/B

BNC-Antennenanschluß A und B. Für einen optimalen Empfang schließen Sie bitte jeweils eine mitgelieferte Antenne an den Anschlüssen A

und B an und richten sie nach oben in „V“ Anordnung.

12

BALANCED OUTPUT

Symmetrischer Audio-Ausgang mit 3-poliger XLR-Buchse.

13

UNBALANCED OUTPUT

Unsymmetrischer Audio-Ausgang mit 6,3mm Klinkenbuchse.

14

INSTRUMENT / LINE

Pegel- und Impedanzanpassung an Instrumenten- bzw. Line-Eingänge für den unsymmetrischen Klinken-Ausgang. Bringen Sie den Schalter

mit einem geeigneten Werkzeug (z.B. Kugelschreiber) in die heruntergedrückte Position INSTRUMENT, wenn Sie den Empfänger am Eingang

eines Instrumentenverstärkers anschließen (Gitarrenverstärker, Bassverstärker) und in die nicht heruntergedrückte Position LINE zum

Anschließen an den Line-Eingang eines Mischpults oder Verstärkers.

15

BALANCED OUTPUT MIX OUT

Symmetrischer Audio-Ausgang mit 3-poliger XLR-Buchse (nur Doppelempfänger, Mix aus Signalen der Kanäle 1 und 2).

16

UNBALANCED OUTPUT MIX OUT

Unsymmetrischer Audio-Ausgang mit 6,3mm Klinkenbuchse (nur Doppelempfänger, Mix aus Signalen der Kanäle 1 und 2).

17

INSTRUMENT / LINE MIX OUT

Pegel- und Impedanzanpassung an Instrumenten- bzw. Line-Eingänge für den unsymmetrischen Klinken-Ausgang MIX OUT (nur Dop-

pelempfänger). Bringen Sie den Schalter mit einem geeigneten Werkzeug (z.B. Kugelschreiber) in die heruntergedrückte Position INSTRU-

MENT, wenn Sie den Empfänger am Eingang eines Instrumentenverstärkers anschließen (Gitarrenverstärker, Bassverstärker) und in die nicht

heruntergedrückte Position LINE zum Anschließen an den Line-Eingang eines Mischpults oder Verstärkers.

La pagina sta caricando ...

LD Systems U500 CC Manuale utente

LD Systems U500 CC Manuale utente

in altre lingue

Documenti correlati

Altri documenti