Moog Videolarm FDW7TS-3 Manuale utente

Marca: Moog Videolarm

Modello: FDW7TS-3

Categoria: Accessori per telecamere di sicurezza

Tipo: Manuale utente

www.videolarm.com

F D W 7 C N - 3

Outdoor / Indoor PTZ Fusion Dome Mount

Installation and Operation Instructions for the following models:

Before attempting to connect or operate this product, please read these

instructions completely. To be used with the 81-IN5409 Instruction Manual.

CERTIFIED

81-IN5357

07-26-2010

FDW7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDW7CN-3 Day/Night camera, wall mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

FDP7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom Day/Night

IFDP7CN-3 camera, pendent mount, MPEG-4/ MJPEG video compression, full D1. Clear dome, with

(Indoor) 24Vac input, heater/blower (Outdoor only)

FDW7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom Day/Night

IFDW7TS-3 camera, wall mount, MPEG-4/ MJPEG video compression, full D1. Clear dome, with

(Indoor) 24Vac input, heater/blower (Outdoor only)

FDP7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDP7CS-3 Day/Night camera, pendent mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

The unit is available in both tinted (T) and clear (C) Models

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

LIMITED WARRANTY

FOR VIDEOLARM INC. PRODUCTS

VIDEOLARM INC. warrants this Product to be free from defectsin material or workmanship,as follows:

PRODUCTCATEGORY PARTS LABOR

All Enclosuresand Electronics Five (5) Years Five (5) Years

Pan/Tilts Three (3) Years **6 months if usedin autoscan Three (3) Years **6 months if usedin autoscan

Poles/PoleEvators Three (3) Years Three (3) Years

Warrior/Q-View/I.R.Illuminators Five (5) Years Five (5) Years

Controllers Five (5) Years Five (5) Years

PowerSupplies Five (5) Years Five (5) Years

AccessoryBrackets Five (5) Years Five (5) Years

During the labor warranty period, to repair the Product,Purchaserwill either return the defective product,freight prepaid, or deliver it to Videolarm Inc.

Decatur GA.The Productto be repaired is to be returned in either its original carton or a similar package

an equal degree of protection with a

RMA# (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA#you must contactour TechnicalSupport

Teamat 800.554.1124,extension 101.Videolarm will return the repaired Productfreight prepaid to Purchaser.Videolarm is not obligated to provide

Purchaserwith a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchasermust pay all labor and/or

parts charges.

1.NOTIFICATIONOF CLAIMS: WARRANTYSERVICE:If Purchaser believes that the Product is defective in material or workmanship, then written notice

with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the

warranty period. If after investigation Videolarm determines that the reported problem was not covered by the warranty, P

urchaser shall pay Videolarm

for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall

extend the warranty period as to the entire Product. The

warranty on the repaired part only shall be in for a period of ninety (90) days

following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater.

2.EXCLUSIVE REMEDY: ACCEPTANCE:Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair

any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3.EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service

during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts

of God (i.e., hurricanes, earthquakes),

failure of the end-user to follow the directions outlined in the product instructions, failure of the

end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions,

or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is

for regular

replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by

personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original

(trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold

AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying

documentation furnished with, or as part of the Product is furnished “AS IS” (i.e., without any warranty of any kind), except where expressly provided

otherwise in any documentation or license agreement furnished with the Product.

4.PROOF OF PURCHASE:The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMEROF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH

REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF

THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE

STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM

PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE

PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL VIDEOLARM BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT

OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

/tour operation

**6 months if used in autoscan

/tour operation

**6 months if used in autoscan

/tour operation

SView Series Five (5) Years

Five (5) Years

The limited warranty stated in these product instructions is subject to all of the following terms and conditions:

TERMS AND CONDITIONS

FDW7CN-3

FDW7CS-3

FDP7CN-3

FDP7CS-3

* IFDW7CN-3

* IFDP7CN-3

24 VAC

80 Watts

Accessories: Heater: 50 Watts, Blower: 2 Watt

Camera Power: (See Camera Specications): 28 Watts Max

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

24 VAC

80 Vatios

De Accesorios: Calentador: 50 Watts, Blower: 2 Vatio

Energía De la Cámara fotográca De : (Véase Las

Especicaciones De la Cámara fotográca): 28 Vatios

De Herramientas Máximas

Requeridas: Destornillador Principal Phillips Del Destornillador

Principal Plano Del 100"

24 VCA

80 Watts

D'Accessoires : Réchauffeur : 50 Watts, Ventilateur : 2 watts.

Puissance D'Appareil-photo : (Voir Les Caractéristiques

D'Appareil-photo) : 28 Watts De Maximum

Les Outils Ont exigé : Tournevis Principal Phillips De Tournevis

Principal Plat De 100".

24 VAC

80 Watt

Zusatzgerät: Heizung: 50 Watts, Blower: 2

Watt-Kamera-Energie: (Sehen Sie Kamera-Spezikationen):

28 Watt Maximale Werkzeug-Erfordert: 100"Flacher

Hauptschraubenzieher-Kreuzkopfhauptschraubenzieher

24 VAC

80 Watts

De Acessórios: Calefator: 50 Watts, Blower: 2 Watt

Poder Da Câmera De : (Veja Especicações Da Câmera):

28 Watts De Ferramentas Máximas Requereram: Chave de

fenda Principal Phillips Da Chave de fenda Principal Lisa Do 100"

24 VCA

80 Watt

Di Accessori: Riscaldatore: 50 Watts, Blower: 2 Watt

Alimentazione Della Macchina fotograca Da :

(Veda Le Speciche Della Macchina fotograca): 28 Watt

Di Attrezzi Massimi Hanno richiesto: Cacciavite Capo "phillips"

Del Cacciavite Capo Piano Del 100"

* INDOOR UNITS DO NOT INCLUDE HEATER/BLOWER

Electrical Specications

Power 24VAC

Class 2 Only

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

* Pan/Tilt unit boxed separately

Pendent Model

(ONLY)

*** Pan Tilt boxed separately along with its instructions.

Bracket is designed for 45° conduit tting (If using the

conduit). Run wire into bracket secure to wall.

• El soporte se diseña para la guarnición del conducto 45° (si usa el

conducto). Funcione con el alambre en el soporte seguro para

emparedar.

• La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si

à l'aide du conduit). Courez le l dans la parenthèse bloquée pour murer.

• Haltewinkel ist für Befestigung des Rohres 45° bestimmt (wenn das Rohr

verwendet wird). Lassen Sie Draht in den Haltewinkel laufen, der, um zu

ummauern sicher ist.

• O suporte é projetado para o encaixe da canalização 45° (se usando a

canalização). Funcione o o no suporte seguro para murar.

• La staffa è progettata per il montaggio del condotto 45° (se per mezzo

del condotto). Faccia funzionare il legare nella staffa sicura per murare.

Trim incoming control & power wires to 4”- 5”,

for either wall or pendent bracket

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

4”-5”

Secure lanyard to lanyard clip

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Complete ALL wiring connections

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

WALL MOUNTING

3 4

Align large arrows

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Important

Gasket

Must be in

place

To lock turn clockwise

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Secure with ¼” Allen wrench

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Trim incoming control and power wires to 4-5 for

either wall or pendent bracket

• La tapa segura de la cubierta SM5 con mercancías duras

proporcionó; termine a la asamblea por las instrucciones SM5

• Le dessus bloqué du logement SM5 avec les articles durs a

fourni; accomplissez l'assemblée par instructions SM5

• Sichere Oberseite des Gehäuses SM5 mit den harten Waren

bereitgestellt; schließen Sie Versammlung pro Anweisungen

SM5 ab

• Parte superior segura da carcaça SM5 com os mercadorias

duros fornecidos; termine o conjunto por as instruções SM5

• Parte superiore sicura dell'alloggiamento SM5 con gli articoli

duri forniti; completi l'assemblea per istruzioni SM5

4”-5”

Secure lanyard to lanyard clip

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Complete all wiring connections

(coax wire not supplied)

• Termine todas las conexiones del cableado

(alambre coaxil no suministrado)

• Accomplissez tous les raccordements de câblage

(fil coaxial non fourni)

• Schließen Sie alle Verdrahtungsanschlüsse ab

(koaxialer Draht nicht geliefert)

• Termine todas as conexões da fiação

(fio co-axial não fornecido)

• Completi tutti i collegamenti dei collegamenti

(legare coassiale non fornito)

FOR PENDENT/

WALL MOUNTING

Align large arrows

• Alinee las flechas grandes

• Alignez les grandes flèches

• Richten Sie große Pfeile aus

• Alinhe grandes setas

• Allini le grandi frecce

To lock turn clockwise

• Alinee las flechas grandes

• Alignez les grandes flèches

• Richten Sie große Pfeile aus

• Alinhe grandes setas

• Allini le grandi frecce

Important

Gasket

Must be in

place

Secure with ¼” Allen wrench

• Asegure con la llave Allen del ¼”

• Fixez clé Allen avec de ¼”

• Sichern Sie mit ¼“ Inbusschlüssel

• Fixe com chave Allen do ¼ de”

• Fissi con chiave di Allen del ¼”

To loosen - unscrew bolts ½” turn counter

clockwise

• Para aflojar - desatornille a la derecha contrario de la vuelta

del ½ de los pernos”

• Pour se desserrer - dans le sens des aiguilles d'une montre de

tour dévissez de boulons ½ » contre-

• Um sich zu lösen - schrauben Sie Schraubbolzen ½“

Umdrehungs-Gegenrechtses herum ab

• Para afrouxar - desaparafuse sentido horário contrário volta

do ½ dos parafusos da”

• Per allentare - sviti in senso orario di girata del ½ dei bulloni„

contro

Green

Yellow

Orange

Red

Camera

Power

Accessory

Power

Camera = red & orange wires to terminal

Heater/Blower = yellow & green wires to terminal

• Cámara fotográfica = alambres rojos y anaranjados al

terminal Heater/Blower = alambres del amarillo y del verde

al terminal

• Appareil-photo = fils rouges et oranges à la borne

Heater/Blower = fils de jaune et de vert à la borne

• Kamera = rote u. orange Leitungen zum Anschluß

Heater/Blower = Gelb- u. Grünleitungen zum Anschluß

• Câmera = fios vermelhos & alaranjados ao terminal

Heater/Blower = fios do amarelo & do verde ao terminal

• Macchina fotografica = legare rossi & arancioni al terminale

Heater/Blower = legare di verde & di colore giallo al termi-

nale

AWG

,5 ,75 1,0 1,5 2,5 4 6

22 20 18 16 14 12 10

The beam angle may be adjusted on the

bottom of the unit.

• Éstos se recomiendan las distancias máximas para

24VAC con una gota del voltage del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une chute de tension de 10%.

• Diese werden maximale Abstände für 24VAC mit

einem 10% Spannungsabfall empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma queda de tensão de 10%.

• Questi sono suggeriti distanze massime per 24VAC

con una differenza de potenziale di 10%.

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

RJ45

BNC (Not Used with NETWORK)

24VAC

Camera

Heater/Blower

Red

Orange

Yellow

Green

POWER

Max 28 Watts

52 Watts

1/0

Alarm 1

Alarm 2

Alarm 3

Common

Blue

Violet

Gray

White

NETWORK:

BNC

24VAC

Camera

Heater/Blower

Red

Orange

Yellow

Green

POWER

Max 28 Watts

52 Watts

1/0

RS-485RX A

RS-485RX B

RS-485TX A

RS-485TX B

Blue

Violet

Gray

White

ANALOG:

Make the appropriate male and female connections. Indoor model does not include pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le modèle d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen Beziehungen her. Innenmodell schließt nicht vor-laufen lassen Kabel

ein.

• Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno non include pre-fa funzionare i cavi.

CAPTIVE SCREW

To secure in place, tighten captive screw.

• Para asegurar en lugar, apriete el tornillo prisionero.

• Pour fixer en place, serrez la vis captive.

• Um im Platz zu sichern, ziehen Sie Sicherheitsschraube

fest.

• Para fixar-se no lugar, aperte o parafuso prisioneiro.

• Per fissare sul posto, stringa la vite prigioniera.

Fasten down the dome with a Phillips

screwdriver.

• Sujete abajo de la bóveda con un destornillador

Phillips.

• Attachez en bas du dôme avec un tournevis

Phillips.

• Befestigen Sie sich hinunter die Haube mit einem

Kreuzkopfschraubenzieher.

• Prenda abaixo a abóbada com uma chave de

fenda Phillips.

• Fissisi giù la cupola con un cacciavite "phillips".

Before

After

Align the arrows on the outside of the dome

and lock.

• Alinee las flechas en el exterior de la bóveda y

trábese.

• Alignez les flèches sur l'extérieur du dôme et

fermez à clef.

• Richten Sie die Pfeile auf der Außenseite der

Haube aus und verriegeln Sie sich.

• Alinhe as setas na parte externa da abóbada e

trave-as.

• Allinei le frecce sulla parte esterna della cupola e

blocchi.

Remove Pan/Tilt from shipping carton.

Install in base bracket in housing.

• Quite Pan/Tilt del cartón del envío. Instale en soporte

bajo en la cubierta.

• Enlevez Pan/Tilt du carton d'expédition. Installez dans

la parenthèse basse dans le logement.

• Entfernen Sie Pan/Tilt vom Verschiffenkarton. Bringen

Sie in niedrigen Haltewinkel im Gehäuse an.

• Remova Pan/Tilt da caixa do transporte. Instale no

suporte baixo na carcaça.

• Rimuova Pan/Tilt dalla scatola di trasporto. Installi in

staffa bassa in alloggiamento.

20 21

Tab

Loop the lanyard around the tab inside the

housing.

• Coloque el acollador alrededor de la lengüeta

dentro de la cubierta.

• Faites une boucle la lanière autour de l'étiquette à

l'intérieur du logement.

• Schlingen Sie die Abzuglinie um den Vorsprung

innerhalb des Gehäuses.

• Dê laços no colhedor em torno da aba dentro da

carcaça.

• Colleghi la cordicella in circuito intorno alla

linguetta all'interno dell'alloggiamento.

Wipe the dome clean.

• Limpie la bóveda limpia.

• Essuyez le dôme.

• Wischen Sie die Haube sauber ab.

• Limpe a abóbada limpa.

• Asciughi la cupola.

Additional wires are provided to run power to PB24. Use with connector supplied. Run RJ45 connector

through PB24, wall mount, and connect lead from housing.

• Los alambres adicionales se proporcionan a la energía funcionada con a PB24. El uso con el conectador proveyó.

Funcione con el conectador RJ45 con PB24, emparede el montaje, y conecte el plomo de la cubierta.

• Des fils additionnels sont fournis à la puissance courue à PB24. L'utilisation avec le connecteur a fourni. Courez le

connecteur RJ45 par PB24, murez le bâti, et reliez le fil du logement.

• Zusätzliche Drähte zur Verfügung gestellt zu laufen gelassener Energie zu PB24. Gebrauch mit Verbindungsstück lieferte.

Laufen lassen Sie Verbindungsstück RJ45 durch PB24, ummauern Sie Einfassung und anschließen Sie Blei vom Gehäuse n.

• Os fios adicionais são fornecidos ao poder funcionado a PB24. O uso com conector forneceu. Funcione o conector RJ45

com PB24, mure a montagem, e conecte a ligação da carcaça.

• I legare supplementari sono forniti a potere funzionato a PB24. L'uso con il connettore ha fornito. Faccia funzionare il

connettore RJ45 con PB24, muri il supporto e colleghi il cavo da alloggiamento.

PB24 Addendum

Replacement Parts List

FDW75

PART NUMBER DESCRIPTION

1 FD7C CLEAR REPLACEMENT CAPSULE

1A FD7T TINTED REPLACEMENT CAPSULE

2 RPFD7501 LOWER TRIM RING

3 RPFD703 DOME CLAMPING RING

4 RPNET02 NETWORK HGS POWER SUPPLY

5 RPFD072 24V HEATER

5A RPFD072/12 12V HEATER (12VDC MODELS ONLY)

6 RPFD080 BLOWER

7 RP3510 CAMERA BRACKET

8 RP70FP7PB CONNECTION PCB(24VAC)

8A RP70FP7PB12 CONNECTION PCB (12VDC)

9 RPFD040 HOUSING TOP

10 RPFD2612 HOUSING TOP GASKET

11 RPFD3245 WALL/PENDE

NT ADAPTER

12 RPGK3356 WALL/PENDENT GASKET

13 RP3458 LANYARD SET

14 RP3551 WM11 WALL MOUNT

15 RP3606 PENDENT MOUNT BRACKET

16 RP3719 1 1/2 FEMALE /FEMALE COUPLING

N/S RPPKH2098 BRACKET PACKET ASSEMBLY

N/S RPPKE1100 ELECTRICAL PACKET ASSEMBLY

N/S RPTRAN02 110 TO 24VAC WALL TRANSFORMER

17 RPVL2857 PAN/TILT BASE BRACKET

18 RP76VL385A PAN/TILT CONNECTION PCB

19 RP96PSGK08 PANT/TILT GROMMET

20 RPVL3097 IP CARD BRACKET

21 RP76P0F060E IP CONNECTION PCB

22 RP7OP14015 IP CARD

FDW7CN-3

Product Registration/Warranty

Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you

with only the highest quality products available with unmatched customer service levels that are second-

to-none in the security industry.

Should a problem arise, rest assure that Videolarm stands behind its products

by offering some of the most impressive warranty plans available: 3 Years

on all Housings, Poles, Power Supplies, and Accessories and 5 Years on

all camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Option 1: Online Option 2: Mail-In

Take a few moments and validate your purchase with our Online Product Registration Form

www.videolarm.com/productregistration.jsp

or complete and mail-in the bottom portion of this yer.

• Simple and Trouble-Free RMA process

• Added into customer database to receive product updates / news

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…

Main Contact Info

First Name: Last Name:

Professional Title: Company:

Address 1: Address 2:

City: State / Province/Country:

Zip / Postal Code: Phone Number: E-mail Address:

Product Information

Please Circle One: Business Personal

Name & Location of Company / Store where Purchased:

(City, State, Country)

Videolarm Product ID Product Description

Serial #

(Available only for Camera Systems, IR Illuminators, Wireless Devices)

PO#

Cut at the dotted Line

Place in envelope, afx stamp and mail to: Videolarm ATTN: Warranty

2525 Park Central Ave.

Decatur, GA 30035

Moog Videolarm FDW7TS-3 Manuale utente

Marca: Moog Videolarm

Modello: FDW7TS-3

Categoria: Accessori per telecamere di sicurezza

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Moog Videolarm FDW7TS-3 User manual

Moog Videolarm FDW7TS-3 Manuale utente

Moog Videolarm FDW7TS-3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti