PURE Evoke-1S Manuale del proprietario

Marca: PURE

Modello: Evoke-1S

Categoria: Radio

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

Marshall EVOKE-1S

Owner’s manual

Vo lume

Info

Source

Standby

Timer

Printed on 100%

recycled paper using

soya-based inks

Safety instructions

Keep the radio away from heat sources.

Do not use the radio near water.

Avoid objects or liquids getting into the radio.

Do not remove screws from or open the radio casing.

Fit the mains adaptor to an easily accessible socket,

located near the radio and ONLY use the mains

power adapter supplied.

Consignes de sécurité

Tenir la radio éloignée de toute source de chaleur.

Ne pas utiliser la radio à proximité d’un point d’eau.

Éviter que des objets ou des liquides ne pénètrent à

l’intérieur de la radio.

Ne pas ouvrir le boîtier de la radio ou en enlever les

vis.

Branchez l’adaptateur sur une prise de courant

facilement accessible, à proximité de la radio et

utilisez UNIQUEMENT l’adaptateur fourni.

Sicherheitshinweise

Halten Sie das Radio fern von Heizquellen.

Benutzen Sie das Radio nicht in der Nähe von Wasser.

Verhindern Sie, dass Gegenstände oder Flüssigkeiten

in das Radio gelangen.

Entfernen Sie keine Schrauben vom Gehäuse und

öffnen Sie dieses nicht.

Schließen Sie das Netzteil an eine leicht erreichbare

Steckdose in der Nähe des Radios an, und benutzen

Sie AUSSCHLIESSLICH das mitgelieferte Netzteil.

Istruzioni di sicurezza

Tenere la radio lontana da fonti di calore.

Non utilizzare la radio vicino all’acqua.

Evitare che oggetti o liquidi penetrino nella radio.

Non rimuovere le viti né aprire l’involucro della radio.

Collegare l’adattatore di rete ad una presa della

corrente facilmente accessibile, situata vicino alla

radio e utilizzare ESCLUSIVAMENTE l’adattatore di

rete fornito.

copied or distributed, transmitted, transcribed, stored

in a retrieval system, or translated into any human

or computer language, in any form or by any means,

electronic, mechanical, magnetic, manual or otherwise,

or disclosed to third parties without the express written

permission of Imagination Technologies Limited.

Trademarks

EVOKE-1S, the EVOKE-1S logo, Intellitext, textSCAN,

ChargePAK, PURE, the PURE logo, PURE Digital,

the PURE Digital logo, EcoPlus, the EcoPlus logo,

Imagination Technologies, and the Imagination

Technologies logo are trademarks or registered

trademarks of Imagination Technologies Limited.

All other product names are trademarks of their

respective companies. Version 1 July 2007.

darf ohne ausdrückliche und schriftliche Zustimmung

von Imagination Technologies Limited in irgendeiner

Form (elektronisch, mechanisch, magnetisch, manuell

oder auf andere Weise) kopiert, verteilt, übermittelt,

überschrieben, in einem Suchsystem gespeichert,

in eine andere natürliche oder Computersprache

übersetzt oder Dritten zugänglich gemacht werden.

Warenzeichen

EVOKE-1S, das EVOKE-1S Logo, Intellitext, textSCAN,

ChargePAK, PURE, das PURE Logo, PURE Digital,

das PURE Digital Logo, EcoPlus, das EcoPlus logo,

Imagination Technologies und das Imagination

Technologies Logo sind Warenzeichen oder eingetragene

Warenzeichen von Imagination Technologies Limited.

Alle anderen Produktnamen sind Warenzeichen

ihrer jeweiligen Besitzer. Version 1. Juli 2007

publication ne doit être copiée ou diffusée, transmise,

retranscrite, stockée dans un système de récupération

de données ou traduite, que ce soit dans une langue

humaine ou dans un langage informatique, sous

quelque forme et par quelque moyen que ce soit,

électronique, mécanique, magnétique, manuel ou autre,

ou encore diffusée auprès de tiers sans autorisation

écrite expresse de Imagination Technologies Limited.

Marques commerciales

EVOKE-1S, le logo EVOKE-1S, Intellitext, textSCAN,

ChargePAK, PURE, le logo PURE, PURE Digital, le logo

PURE Digital, EcoPlus, le logo EcoPlus, Imagination

Technologies et le logo Imagination Technologies sont

des marques commerciales ou des marques déposées

de Imagination Technologies Limited. Tous les autres

noms de produits sont des marques commerciales de

leurs détenteurs respectifs. Version 1 er juillet 2007.

pubblicaziEVOKE-1S può essere copiata o distribuita,

trasmessa, trascritta, memorizzata in un sistema

di archiviaziEVOKE-1S, o tradotta in un formato

normalmente comprensibile, in qualsiasi forma o con

qualsiasi mezzo, elettronico, meccanico, magnetico,

manuale o altro, o divulgata a terze parti senza il

permesso scritto di Imagination Technologies Limited.

Marchi

EVOKE-1S, il logo EVOKE-1S, Intellitext, textSCAN,

ChargePAK, PURE, il logo PURE, PURE Digital, il logo

PURE Digital, EcoPlus, il logo EcoPlus, Imagination

Technologies e il logo Imagination Technologies sono

marchi o marchi registrati di Imagination Technologies

Limited. Tutti gli altri nomi di prodotti sono marchi di

proprietà delle rispettive società. Version 1. luglio 2007.

Sikkerhedsforskrifter

Hold radioen på afstand af varmekilder.

Brug ikke radioen i nærheden af vand.

Undgå at der kommer genstande eller væske i

radioen.

Fjern ikke skruer fra og åbn ikke radiokabinettet.

De bør tilslutte strømforsyningen til et

lettilgængeligt strømudtag tæt på radioen. De bør

KUN bruge den medfølgende strømforsyning.

Limited. Alle rettigheder forbeholdes. Ingen dele af

denne publikation må kopieres eller distribueres,

transmitteres, omskrives, gemmes i et system, hvor den

kan hentes, eller oversættes til menneskeligt forståeligt

sprog eller computersprog, i nogen som helst form eller

med nogen som helst midler, det være sig elektroniske,

mekaniske, magnetiske, manuelle eller på anden

måde, eller fremvises til tredje parter uden udtrykkelig,

skriftlig tilladelse fra Imagination Technologies Limited.

Varemærker

EVOKE-1S, EVOKE-1S-logoet, Intellitext, textSCAN,

ChargePAK, PURE, PURE-logoet, PURE Digital, PURE

Digital-logoet, EcoPlus, EcoPlus-logoet, Imagination

Technologies og Imagination Technologies-logoet

er varemærker eller registrerede varemærker, der

tilhører Imagination Technologies L imited. Alle

andre produktnavne er varemærker, der tilhører

deres respektive virksomheder. Version 1. juli 2007.

Veiligheidsinstructies

Houd de radio uit de buurt van warmtebronnen.

Gebruik de radio niet in de buurt van water.

Vermijd dat voorwerpen of vloeistoffen in de radio

terechtkomen.

Verwijder geen schroeven uit de omkasting van de

radio en open het niet.

Steek de lichtnetadapter in een gemakkelijk

toegankelijk stopcontact in de buurt van de

radio en gebruik ALLEEN de meegeleverde

spanningsadapter voor het lichtnet.

Alle rechten gereserveerd. Geen enkel gedeelte van

deze publicatie mag gekopieerd of gedistribueerd,

uitgezonden, overgeschreven, opgeslagen in een

retrieval system of vertaald in om het even welke

menselijke of computertaal, in geen enkele vorm of

door geen enkel middel, elektronisch, mechanisch,

magnetisch, manueel of anders of bekend gemaakt

aan derde partijen zonder de uitdrukkelijke geschreven

toestemming van Imagination Technologies Limited.

Handelsmerken

EVOKE-1S, het EVOKE-1S logo, Intellitext, textSCAN,

ChargePAK, PURE, het PURE logo, PURE Digital,

het PURE Digital logo, EcoPlus, het EcoPlus logo,

Imagina tion Tec hnolog ies en he t Imagina tion

Technologies logo zijn handelsmerken of geregistreerde

handelsmerken van Imagination Technologies Limited.

Alle andere productnamen zijn handelsmerken

van hun respectieve firma’s. Versie 1. juli 2007.

Contents

Start �� 2

Quick set up .........................................................................................2

Controls at a glance ..............................................................................3

Rear connectors ....................................................................................3

Using your EVOKE-1S �� 4

Volume controls .....................................................................................4

Switching between DAB, FM and an Auxiliary device .................................4

Changing stations ..................................................................................4

Changing the information shown on screen ..............................................5

Using textSCAN™ to pause and control scrolling text ................................5

Setting the alarm & timer �� 6

Setting the alarm ..................................................................................6

To cancel a sounding tone or radio alarm ................................................7

Kitchen timer ........................................................................................7

Presets and Intellitext �� 8

Storing and selecting presets .................................................................8

Intellitext® ............................................................................................9

Setup options �� 10

Options available in DAB ......................................................................10

Options available in FM ........................................................................11

General options ...................................................................................11

Adjusting the display ...........................................................................11

Energy saving ......................................................................................12

Software Updates ................................................................................12

Using a ChargePAK™ ............................................................................12

Help and Specifications �� 13

Secondary and inactive stations ...........................................................13

Hints and tips .....................................................................................13

Technical Specifications .......................................................................14

Contents

Unclip the aerial from the clip on the rear of the radio and fully extend it (steps A and B).

Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).

Plug the mains adapter into the mains supply (step D) and press the Standby button.

a) When you see the message ‘Enable energy saving?’ push the Tune dial.

b) Select ‘On’ to switch on energy saving mode (push the Tune dial).

When energy saving mode is switched on, the radio uses less power in standby

because it does not collect and store Intellitext messages in standby. It still collects

and stores Intellitext messages while the radio is switched on.

With energy saving mode switched on, the power consumption of EVOKE-1S in standby

is less than 1 Watt.

For more information: Intellitext > page 9 energy saving mode > page 12

Wait for Evoke-1S to complete an Autotune for all available DAB stations (this takes

about a minute). When the Autotune is complete, a station will be selected.

Start

Quick set up

Start

Ster eo O ut

Aeri al

Aux InUSB Aux Sp ea ke r

Desi gn ed a nd e ng ine er ed in t he U K M an uf ac tu red i n Ch ina

Desi gne d in t he U K M an uf act ur ed i n C hi na

6V D C

Ster eo O ut

Aeri al

Aux InUSB Aux Sp ea ke r

Desi gn ed a nd e ng ine er ed in t he U K M an uf ac tu red i n Ch ina

Desi gne d in t he U K M an uf act ure d in C hi na

6V D C

6V DC

EcoPlus

saving?

Enable energy

Energy saving

Tune

PURE EVOKE-1S

Now tuning...

Talking to the people wh

BBC Radio 2

Quick set up > Controls at a glance > Rear connectors

Controls at a glance

Volume

Tune

Info

Source

123

456

Standby Timer

Volume dial

Adjust and mute

volume

> page 4

Tune dial

Browse and select radio

stations > page 4

Use textSCAN > page 5

Presets 1 − 6+

Store up to 30 DAB or FM

preset stations > page 8

Light sensor

Auto-adjusts the display

brightness > page 11

Use Intellitext > page 9

Set the alarm > page 6

Adjust the display > page 11

Setup options > pages 10-13

Source

Switch audio

source

> page 4

Standby

Switch the radio

into standby or off

if a ChargePAK is

ﬁtted > page 12

Timer

Set the kitchen

timer > page 7

Info

Change the information shown

on screen > page 5

Rear connectors

6V DC

Aux In

Aux Speaker

Stereo Out

USB

Standard

type-B USB

connector for

upgrades only.

Analogue

stereo input

for iPod,

MiniDisc, etc.

3.5 mm

headphone

socket.

Connect to

an external

ampliﬁer.

Connect to an

optional S-1

speaker for

stereo sound.

Connect to

supplied

mains

adapter only.

Using your EVOKE-1S

Volume controls

Adjusting the volume

Switching between DAB, FM and an Auxiliary device

Press the Source button and then repeat to listen to DAB, FM or Auxiliary device (a separate

device such as an MP3 player).

Changing stations

When listening to DAB

Turn the Tune dial left or right to browse through the list of available DAB stations. The current

station remains at the top of the screen. Push the Tune dial to change the station.

When listening to FM

Seek Tuning

Turn and release the Tune dial right or left to seek to the next or previous FM station that has a

strong signal.

Manual Tuning

1. Change the FM tuning mode to ‘Manual’ (see page 11).

2. Turn the Tune dial right or left to step up or down 0.05 MHz.

Adjust volume > Switch DAB/FM/Aux > Change stations > Change on-screen info > textSCAN™

Using your EVOKE-1S

Source

Muting the volume

Volume

Tune

BBC Radio 6Music

BBC Radio 2

Now playing: Race For T

BBC Radio 6Music

96.60MHz FM

87.50MHz FM

Searching... >

1.5

87.50MHz FM

Changing the information shown on screen

You can change the information that is displayed on screen. Press the Info button and repeat to

cycle through the information display options available for the current audio source.

Scrolling text Information broadcast by most DAB stations and some FM (RDS) stations.

Full screen time Displays the time (and an alarm indicator if the alarm is set).

Time and date Displays the time and date updated regularly by the DAB or FM (RDS) signal.

Programme type Describes the content of the current DAB or FM (RDS) station, e.g., Pop Music.

Multiplex name The DAB multiplex in which the current station is broadcast, e.g., Digital1.

Multiplex info The channel of the current DAB Multiplex, e.g., 12B.

Bit rate The bit rate (audio compression level) of the current DAB station and a

stereo/mono indicator.

Signal quality Displays DAB signal quality: 85 to 100 good; 70 to 84 OK; 0 to 69 poor.

Signal strength Displays a meter illustrating the strength of the DAB or FM signal.

Stereo mode Indicates whether the current FM broadcast is in stereo.

ChargePAK status Displays a charging or percentage power remaining indicator for the

optional ChargePAK Model E1 rechargeable battery pack (see page 12).

Using textSCAN™ to pause and control scrolling text

1. When ‘Scrolling text’ information is displayed in either DAB or FM, push the Tune dial to

pause the scrolling text.

2. Turn the Tune dial right and left to scroll forwards and backwards through the current scrolling

text. To exit textSCAN push the Tune dial again.

Using your EVOKE-1S

Tune

Now playing: Race For T

BBC Radio 6Music

Playing: Race For Th

BBC Radio 6Music

Prize by Flaming Lips

BBC Radio 6Music

> Exit

BBC Radio 6Music

50% charging

BBC Radio 6Music

50%

Charging indicator

(when receiving mains power).

% Charge remaining

(when powered by a ChargePAK)

Setting the alarm & timer

Setting the alarm

EVOKE-1S has an alarm which switches the radio on (if in standby mode) and tunes to a DAB or

FM radio station, or sounds an alarm tone.

1. Press the Menu button, turn the Tune dial and push to select ‘Alarm settings’.

2. Push the Tune dial to select ‘Set alarm’, scroll to ‘On’ and push the Tune dial to select. The

alarm is now active.

3. Push the Tune dial to select ‘Set time’. To set the time you want the alarm to sound turn the

Tune dial to adjust the hours and then push to conﬁrm. Repeat to adjust the minutes.

4. Push the Tune dial to select ‘Set days’. Choose when you want the alarm to repeat (turn the

Tune dial to browse through the options and push to select).

Daily Every day

Weekday Monday – Friday, every week

Weekend Every weekend

Saturday Every Saturday

Sunday Every Sunday

Once only The alarm will sound at the time you have selected and not repeat.

5. Push the Tune dial to select ‘Set mode’ and choose the type of alarm you want to sound:

DAB, FM or Tone. If you select ‘Tone’, there are no further options.

6. For DAB and FM alarms only, push the Tune dial to select ‘Select station’ and choose which

DAB or FM radio station you want to sound for the alarm.

For DAB alarms

Select a DAB station from the station list.

For FM alarms

Choose between ‘Last tuned’ or an FM preset station. If you select ‘Last tuned’ the alarm will

tune to the last FM station you listen to before the alarm sounds.

Set the alarm > Set the kitchen timer

Setting the alarm & timer

Tune

08:00 set hours

07:00

Tune

If you want to set

a ‘one-off’ alarm

choose ‘Once only’.

Tip

(Menu > Alarm settings)

Tune

Set alarm

Off

7. If you have selected a DAB or FM alarm you can push the Tune dial to select ‘Alarm volume’

and turn to adjust the volume level for the alarm from 1 (very quiet) to 32 (very loud).

That’s it! You can see if the alarm is currently switched on in the ‘Full screen time’ display (see

page 5). Alarms can be set and adjusted from standby by pressing the Menu button.

To cancel a sounding tone or radio alarm

When a tone alarm is sounding, push the Tune dial or press Standby to cancel the alarm. To

cancel a DAB or FM alarm and return the radio to standby, press the Standby button.

Kitchen timer

EVOKE-1S has a countdown timer which will sound an alarm after a set time period – handy for

use in the kitchen.

To set a kitchen timer

1. Press the Timer button.

2. Turn the Tune dial to change the hours and push to conﬁrm. Turn again to change the minutes

and push to conﬁrm and start the countdown timer.

The alarm will sound after the time period you have set whether the radio is on or in standby.

Cancel the beeping alarm tone by pressing any button on the radio.

To stop and reset the kitchen timer to zero

To stop and reset the kitchen countdown timer to zero before it sounds a beeping tone, press and

hold down the Timer button for three seconds until you see the message ‘Timer cleared’.

Setting the alarm & timer

Timer

Tune

01 hours 00 mins

01 hours 25 mins

08:30

Tune

Standby

Timer cleared

22:45

08:30

The alarm is set to

sound at 8:30 am

Alarm volume

Tune

An outlined bell

shows that the alarm

will not sound within

the next 24 hours.

Tip

Presets and Intellitext

Storing and selecting presets

Store up to 30 of your favourite DAB or FM radio stations in a combined list.

To quick-store a DAB or FM station to a preset button (1–5)

Tune to the DAB or FM station you want to store. Press and hold one of the numbered Preset

buttons (1–5) for two seconds until you see the ‘Preset saved’ message on the bottom line.

To store a DAB/FM station to the preset list (1–30)

1. Tune to the DAB or FM station you want to store.

2. Press and release the 6+ button to view the numerical list of stored presets, then turn the

Tune dial to choose any Preset number between 1 and 30. You can overwrite existing presets.

3. Press and hold the 6+ button (or the Tune dial) for two seconds until you see the ‘Preset

saved’ message. The current DAB/FM station is now stored to that number on the Preset list.

To recall a preset when listening to DAB or FM

1. To tune to Presets 1 to 5, press the corresponding numbered button on the unit (1 to 5).

2. To access the full list of presets (from 1 to 30), press and release the 6+ button, turn the

Tune dial right or left to scroll through the list of presets, then push and release the Tune dial

to tune to the selected preset. Presets are labelled with ‘DAB’, ‘FM’ or ‘Empty Preset’.

Store and select preset stations > Browse Intellitext

Presets and Intellitext

Empty preset

Preset 6

Empty Preset

Preset 10

Preset 10 saved

theJazz

Now: Remember by Ha

theJazz

Now: Remember by Ha

theJazz

Preset 1 saved

BBC Radio 6Music

BBC Radio 6 Music

Now playing: No Cars G

Tune

DAB theJazz

Preset 10

Tune

Presets and Intellitext

Intellitext®

Intellitext provides on-demand text information such as sports headlines, weather, and news from

DAB stations that support the service including Virgin, BBC Radio Five Live and talkSPORT. The

text is updated by the broadcasters and stored in your radio while you listen to stations. Intellitext

is listed by station and split into categories. For example, the broadcaster may send information

on Football, Cricket, Headlines, etc. When energy saving mode is switched on, Intellitext will be

collected for stations that you have been tuned to for a while. If you have switched off energy

saving mode, the radio will also collect Intellitext in standby (from the last station from which you

viewed Intellitext) which you are able to view when you next switch on.

To view Intellitext messages

1. Press Menu and select ‘Intellitext’ to view a list of stations for which you have Intellitext

information. Push the Tune dial to select a station and use the Tune dial to select and

view Intellitext categories for that station, e.g., BBC Radio 5Live > SPORT > FOOTBALL. The

selected information will scroll across the screen.

2. You can use textSCAN when viewing the text by pushing the Tune dial. To exit textSCAN press

Menu.

To change Intellitext options

Set timeout

Choose to delete old Intellitext messages after 1 week (default) or 1 day.

Clear all

Delete all stored Intellitext messages immediately.

Tune

FOOTBALL

SPORT

Man City complete the s

FOOTBALL

(Menu > Intellitext)

(Menu > Intellitext > Options)

Setup options

Options available in DAB

When listening to DAB, press the Menu button, turn the Tune dial to scroll through the options

and push the Tune dial to select.

DRC value

DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to hear

at low volume or in a noisy environment. Check with the broadcasters to ﬁnd out if they use DRC.

DRC full Applies the DRC level as sent with the broadcast.

DRC half DRC level is set to half that sent with the broadcast.

DRC off Any DRC level broadcast will be ignored.

Station order

Change the order that DAB stations appear in the list.

Alphanumeric Lists all stations in alphanumeric order.

Active station Lists active stations ﬁrst on the station list

Multiplex Lists stations in groups according to their multiplex – a group of stations

broadcast by the same operator.

Trim stn� list Removes inactive stations from the station list (see page 13).

Autotune

Scans all DAB Band III frequencies for stations and automatically adds any new stations found to

the station list. This may take a few minutes. To stop an Autotune press Menu.

Manual tune

Manual tune displays a signal strength meter to help you determine the best position for your

radio where the DAB signal is weak. You can also manually tune to weak multiplexes to add new

stations. Press Menu, scroll to ‘Tuning’ and select ‘Manual tune’.

1. Turn the Tune dial to scroll through different channels and push the dial to choose one.

2. A meter indicating signal strength is displayed. The empty block shows the minimum signal

level required and the ﬁlled blocks show the current reception level.

3. Move the unit or the aerial and try to raise the meter beyond the empty block. Once you have

a good signal the multiplex name will be displayed and any new stations are added to the

station list.

4. Turn the Tune dial to browse to another channel and push to select or press Menu to exit

Manual tune.

Setup options

Options available in DAB > Options available in FM > General options

(Menu > DRC value)

(Menu > Station order)

(Menu > Tuning > Autotune)

(Menu > Tuning > Manual tune)

12B 225.64MHz

12B BBC National DAB

Options available in FM

FM tuning mode

Seek

When you turn the Tune dial, the radio tunes to the next station with a good signal.

Manual

When you turn the Tune dial, the radio tunes up or down the FM frequency range by 0.05 MHz.

FM stereo mode

Choose from Stereo or Mono (default). Mono may improve audio clarity where stereo signals are

weak.

General options

Adjusting the display

You can adjust the brightness and time-out duration of the display for when the unit is switched

on and in standby. To change display options:

1. Press Menu, scroll to ‘Display settings’ and push the Tune dial.

2. Now choose either ‘Active’ to change settings that apply when the unit is switched on, or

‘Standby’ to change settings that apply in standby.

Changing the display time-out duration

Select ‘Duration’ and choose from the following two modes:

Always on The screen is always set to your preferred brightness level.

Timed off The screen is set to your preferred brightness level when a button is pressed and

then switches off after 7 seconds of inactivity.

Changing your preferred brightness level

Select ‘Brightness’ and choose from the following options:

Automatic The brightness of the screen adjusts automatically depending on the ambient light

levels in the room (default).

1–10 Turn the Tune dial to vary the brightness level between 1 (very dim) and 10 (very

bright) and push to conﬁrm your preferred setting.

Screensaver

EVOKE-1S has a screensaver that appears when the unit is left unattended whilst on or in

standby. To avoid screen burn-in over a long period, it is recommended that you do not switch the

screensaver off. Two options are available:

On (default) The screensaver appears after no buttons have been pressed for 15 minutes. Press

any button to exit the screensaver and operate the radio.

Off Screensaver does not appear.

OLED displays are more power-

efﬁcient than LCD displays because

they do not require a backlight.

(Menu > FM tuning mode)

(Menu > FM stereo mode)

(Menu > Display settings)

Setup options

Set clock

You can manually set the time and date if required. If you have a DAB signal and/or a good FM

(RDS) reception these will be updated automatically.

Energy saving

EVOKE-1S is part of the PURE EcoPlus product family, designed and manufactured to minimise

power consumption when the unit is switched on and to use less than 1 Watt in standby. One way

this low power consumption is enabled is by not collecting and storing Intellitext messages when

the unit is in standby. You can override this option by switching off energy saving mode, but this

will increase standby power consumption. Two options are available:

Energy saving On (the default setting)

EVOKE-1S updates the Intellitext data when you tune to a station that broadcasts Intellitext.

Intellitext data is not collected in standby.

Energy saving Off

EVOKE-1S collects Intellitext data in standby from the last station you tuned to with Intellitext,

which increases standby power consumption.

Note: if you ﬁt the optional ChargePAK E1 (see below) the unit will switch off when you press the

Standby button and not enter standby, as long as the unit is not connected to mains power.

Software Updates

Software updates for your EVOKE-1S may be made available in the future. If you register your

product and include a valid e-mail address you will receive notiﬁcation of software updates

(register at www.pure.com/register or ﬁll in the supplied warranty card). Alternatively, visit

www.pure.com/support at any time to check for available software updates.

To update your software

Connect your radio to your PC using a suitable A-to-B type USB cable. Follow the instructions

provided with the software download at www.pure.com/support.

Note: USB update requires a PC (not Mac) with internet access running Windows XP and a

suitable USB cable (not included).

Using a ChargePAK™

ChargePAK Model E1 is a rechargeable battery pack which plugs into the socket in the radio’s

battery compartment. Whenever your radio is connected to a mains supply the ChargePAK will

charge up and the power remaining will be available to view as a percentage in the Information

display options (page 5). A complete charge will provide about 24 hours of portable listening.

To purchase a PURE ChargePAK Model E1, contact your nearest PURE dealer, visit the shop on our

website at www.pure.com or call the PURE order line on 0845 045 1122.

Important: EVOKE-1S can only be powered with a ChargePAK Model E1 and is not compatible

with any other batteries, either disposable or rechargeable, or any other ChargePAK model. Always

switch the unit off and disconnect it from mains power before inserting or removing a ChargePAK.

Charge a new ChargePAK for 24 hours before ﬁrst using battery power. Carefully follow the

separate ﬁtting instructions that are supplied with the ChargePAK Model E1.

Setup options

™

ChargeP A K

This product has a special

energy saving standby mode.

(Menu > Set clock)

(Menu > Upgrade)

(Menu > Energy saving)

Help and Specifications

Secondary and inactive stations

(<</>>) Secondary DAB services

Secondary services accompany some stations, providing extra information or alternative content

and may only be broadcast at certain times. If a station has secondary services available, the

station shows ‘>>’ next to its name in the station list and the secondary service appears next to

the station in the list. A secondary service has a ‘<<’ before its name in the station list.

(?) Inactive or unavailable DAB stations

Inactive or unavailable stations appear on the station list preceded by ‘?’ and cannot be tuned

to. A station may be inactive or unavailable because the station is not broadcasting at the current

time (check with the station) or has stopped broadcasting altogether. Also, you may not have a

strong enough signal to receive the Multiplex on which the station is broadcast.

Hints and tips

Display says ‘No stations available’

Use Autotune (page 10) to search for stations. Try adjusting your aerial or radio position.

Receiving new DAB stations that have started broadcasting

Use Autotune (p 10) to scan for new stations and add any new DAB services to the station list.

The screen is very dark

Check that the light sensor on the front panel is not obstructed.

Using the alarm when a ChargePAK Model E1 is fitted

When the radio is powered by a ChargePAK Model E1 for portable listening, i.e., a ChargePAK

rechargeable battery is ﬁtted and the unit is not connected to mains power, the radio switches off

completely when the Standby button is pressed and the alarm will not sound. In this case, the

message ‘Disabling alarm’ will be displayed when the Standby button is pressed.

Resetting your radio

Resetting your radio removes all presets, clears the station list and resets all options to defaults.

1. Press and hold the Menu button for three seconds.

2. Push the Tune dial within 3 seconds to conﬁrm the reset or the reset will cancel.

Secondary and inactive stations > Hints and tips > Technical Speciﬁcations

Help and Speciﬁcations

Technical Specifications

General Stereo digital radio (stereo output requires optional auxiliary speaker,

headphones or external ampliﬁer) with full Band III and FM reception. ETS 300

410 compliant and capable of decoding all DAB transmission modes 1-4 up to

and including 256 kbps. Supports FM RDS and RadioText.

Frequency ranges Band III 174–240 MHz, FM 87.5–108 MHz.

Speaker Full-range 3” drive unit.

Inputs 6V DC power adaptor socket (230V supplied). 3.5mm Line-in for auxiliary

devices. USB (B type) for product upgrades.

Outputs 3.5mm headphone, 3.5mm line out (analogue), 3.5mm auxiliary speaker output.

Presets 30 DAB and FM presets in a combined list.

Display High contrast yellow graphical 128 x 22 organic LED (OLED) display

Power supply 230V AC to 6V DC external power adapter.

Approvals CE marked. Compliant with the EMC and Low Voltage Directives (89/336/EEC

and 73/23/EEC).

Dimensions (mm) 175 high x 210 wide x 110 deep.

Aerial: Captive telescopic aerial.

Help and Speciﬁcations

Components are selected for

minimised environmental impact.

Warranty information

Imagination Technologies Ltd. warrants to the end user that this product

will be free from defects in materials and workmanship in the course

of normal use for a period of two years from the date of purchase. This

guarantee covers breakdowns due to manufacturing or design faults; it

does not apply in cases such as accidental damage, however caused, wear

and tear, negligence, adjustment, modification or repair not authorised by

us. Please visit www.pure.com/register to register your product with us.

Should you have a problem with your unit please contact your supplier or

contact PURE Support at the address shown on the rear of this manual.

Disclaimer

Imagination Technologies Limited makes no representation or warranties

with respect to the content of this document and specifically disclaims

any implied warranties of merchantability or fitness for any particular

purpose. Further, Imagination Technologies Limited reserves the

right to revise this publication and to make changes in it from time

to time without obligation of Imagination Technologies Limited to

notify any person or organization of such revisions or changes.

Garantie-Informationen

Imagination Technologies Ltd. garantier t dem Endbenutzer, dass

dieses Produkt für die Dauer von zwei Jahren ab Kaufdatum bei

normalem Gebrauch frei von Schäden an Material oder Verarbeitung

ist. Diese Garantie umfasst Ausfälle aufgrund von Herstellungs- und

Konstruktionsfehlern; sie gilt nicht für Unfallschäden, wie auch immer

verursacht, Verschleiß, Fahrlässigkeit und Veränderung oder Reparatur

durch von uns nicht autorisierte Personen. Registrieren Sie Ihr Produkt

bei uns unter www.pure.com/register. Sollten Sie mit Ihrem Gerät ein

Problem haben, wenden Sie sich an Ihren Verkäufer oder den PURE Support.

Die Adresse finden Sie auf der Rückseite dieser Bedienungsanleitung.

Ausschlusshinweis

Imagination Technologies Limited gewährt keine Garantien für den Inhalt

dieses Dokuments und lehnt insbesondere implizierte Garantien für die

allgemeine Gebrauchstauglichkeit bzw. die Eignung für spezielle Zwecke ab.

Weiterhin behält sich Imagination Technologies Limited das Recht vor, diese

Publikation von Zeit zu Zeit zu überarbeiten und zu ändern, ohne dass daraus

eine Verpflichtung für Imagination Technologies Limited entsteht, irgendeine

Person oder Organisation von solchen Änderungen in Kenntnis zu setzen.

Garantie

Imagination Technologies Ltd. garantit à l’utilisateur que le présent produit

est exempt de défauts en termes de matériaux et de main-d’œuvre, dans le

cadre d’une utilisation normale, pour une période de deux ans à compter de

la date d’achat. La présente garantie couvre les pannes dues à un défaut de

conception ou de fabrication ; elle ne prend pas en compte les dommages

accidentels, quelle que soit leur cause, l’usure normale du produit, ainsi que

tous dommages dus à la négligence, à la modification, au réglage ou à la

réparation effectué(e) sur l’appareil sans notre autorisation. Visiter le site www.

pure.com/register pour enregistrer votre produit auprès de nos services. En

cas de problème avec votre appareil, veuillez contacter votre fournisseur ou

le centre d’assistance PURE, à l’adresse indiquée au dos du présent manuel.

Avis de non-responsabilité

Imagination Technologies Limited refuse toute représentation ou garantie

vis-à-vis du contenu du présent document et refuse spécifiquement

toute garantie implicite de valeur marchande ou d’adéquation à un

usage spécifique. En outre, Imagination Technologies Limited se

réserve le droit de réviser la présente publication et d’y apporter des

modifications, quand elle le souhaite, sans obligation de sa part de notifier

toute personne ou organisation desdites révisions ou modifications.

Informazioni sulla garanzia

Imagination Technologies Ltd. garantisce all’utente finale che il

presente prodotto è esente da difetti di materiale e fabbricazione in

condizioni normali di utilizzo per un periodo di due anni a partire dalla

data di acquisto. La presente garanzia copre i danni dovuti a difetti

di fabbricazione o progettazione; non si applica in casi quali danni

accidentali, in qualsiasi modo siano stati provocati, usura, negligenza,

regolazione, modifica o riparazione non autorizzate. Visitare il sito www.

pure.com/register per registrare il prodotto. In caso di problemi relativi

all’unità, contattare il proprio fornitore oppure contattare il Supporto

tecnico PURE all’indirizzo indicato sul retro del presente manuale.

Dichiarazione di non responsabilità

Imagination Technologies Limited non si assume alcuna responsabilità

rispetto al contenuto del presente documento, in particolare non riconosce

nessuna garanzia implicita di commerciabilità o idoneità per uno scopo

specifico. Inoltre, Imagination Technologies Limited si riserva il diritto di

revisionare la presente pubblicazione e di apportarvi modifiche periodiche

senza alcun obbligo di notifica a qualsiasi persona o organizzazione.

Garantioplysninger

Imagination Technologies Ltd. garanterer over for slutbrugeren, at dette

produkt ikke er fejlbehæftet, hvad angår materialer og håndværksmæssig

udførelse ved normal brug i to år fra købsdatoen. Denne garanti

dækker sammenbrud, der skyldes fremstillings- eller designfejl.

Den dækker ikke i tilfælde, hvor enheden beskadiges som følge af

hændeligt uheld, uanset hvordan dette sker, samt slitage, uagtsomhed,

justering, ændring eller reparation, som ikke er godkendt af os. Besøge

www.pure.com/register for at registrere produktet hos os. Hvis der skulle

opstå problemer med enheden, bedes du kontakte leverandøren eller PURE

Support på adressen, der er angivet på bagsiden af denne vejledning.

Ansvarsfraskrivelse

Imagination Technologies Limited afgiver ingen garantier eller erklæringer

med hensyn til indholdet af dette dokument og fralægger sig i særdeleshed

eventuelle stiltiende garantier for salgbarhed eller egnethed til et bestemt

formål. Endvidere forbeholder Imagination Technologies Limited sig ret

til at revidere denne publikation og foretage ændringer fra tid til anden,

uden at Imagination Technologies Limited er forpligtet til at underrette

nogen person eller organisation om sådanne revideringer eller ændringer.

Informatie over de waarborg

Imagination Technologies Ltd. waarborgt de eindgebruiker dat dit product

vrij is van defecten in materialen en werkuren bij normaal gebruik voor een

duur van twee jaar vanaf de datum van aankoop. Deze garantie dekt defecten

door productie- of ontwerpfouten; het is niet van toepassing in gevallen

als accidentele schade, hoe ook veroorzaakt, slijtage, onachtzaamheid,

instelling, wijziging of reparatie die door ons niet werd goedgekeurd. Bezoek

www.pure.com om uw product bij ons te registreren. Indien u een probleem

hebt met uw apparaat, gelieve uw leverancier te contacteren of contacteer

PURE Support op het adres op de achterzijde van deze handleiding.

Vrijwaring

Imagination Technologies Limited geeft geen verklaring of garanties

met betrekking tot de inhoud van dit document en wijst specifiek elke

verantwoordelijkheid af met betrekking tot om het even welke onuitgesproken

garanties naar verhandelbaarheid of geschiktheid voor enig bijzonder doel.

Daarenboven behoudt Imagination Technologies Limited zich het recht voor

om deze publicatie te reviseren en af en toe veranderingen aan te brengen

zonder de verplichting voor Imagination Technologies Limited om personen

of organisaties van deze revisies of veranderingen op de hoog te te brengen.

100JN

EcoPlus

100%

EVOKE-1S is a member of the PURE EcoPlus™ product family�

All EcoPlus products are designed and manufactured to minimise

their environmental impact�

Documentation is printed on 100% recycled paper using soya-

based ink.

The retail carton protecting your product is printed on at least

70% recycled card ﬁnished using a water-based varnish and

sized for maximum transport efﬁciency.

For more information please visit www.pure.com/ecoplus

www.pure.com

PURE Digital - Vertrieb über:

TELANOR AG

Unterhaltungselektronik

Bachstrasse 42

4654 Lostorf

SCHWEIZ/SWITZERLAND

+41 (0)62 285 95 85

+41 (0)62 285 95 95 sales

info@telanor.ch

www.telanor.ch

PURE Digital

Imagination Technologies Ltd.

Home Park Estate

Kings Langley

Herts, WD4 8DH

+44 (0)1923 270188

+44 (0)1923 277477 support

+44 (0)1923 277488 sales

support@pure.com

sales@pure.com

PURE Digital

Karl-Marx Strasse 6

64589 Stockstadt/Rhein

GERMANY

+49 (0)6158 878874

+49 (0)6158 878872 sales

sales_gmbh@pure.com

PURE Evoke-1S Manuale del proprietario

Marca: PURE

Modello: Evoke-1S

Categoria: Radio

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

Marshall EVOKE-1S

Scarica il pdf

rapporto

in altre lingue

English: PURE Evoke-1S Owner's manual
français: PURE Evoke-1S Le manuel du propriétaire
dansk: PURE Evoke-1S Brugervejledning

Documenti correlati

Altri documenti

Sony SRF-DR2000 Manuale utente