Electrolux ENB5298XREEN Manuale utente

Marca: Electrolux

Modello: ENB5298XREEN

Categoria: Frigo-congelatori

Tipo: Manuale utente

USER INSTRUCTIONS

FROST FREE

REFRIGERATION

ENG

Top Freezer Model

Bottom Freezer Model

Note: Product illustrations demonstrate various features but may not be

completely in line with current products.

ii contents refrigeration

1 Freezer Bins

2 Twin Dairy Compartments

3 Store Safe Bin (where fitted)

4 Adjustable Door Bins

5 Multi Flow Outlets

6 Bottle Restrainer

7 Converta Bin(s)

8 Feature Lighting (where fitted)

9 Wine Rack (where fitted)

10 Deli Bin (where fitted)

11 Food Compartment Light

12 Air Curtain Cooling

13 Freezer Air Returns

14 Ice Cube Tray Lid & Storage Bin

15 Freezer Light (where fitted)

16 Freezer Air Outlets

17 Freezer Temperature Sensor

1 Twin Dairy Compartments

2 Store Safe Bin (where fitted)

3 Adjustable Door Bins

4 Multi Flow Outlets

5 Bottle Restrainer

6 Freezer Air Outlets

7 Ice Cube Tray Lid & Storage Bin

8 Freezer Baskets

9 Freezer Air Returns

10 Freezer Top Shelf

11 Converta Bin(s)

12 Feature Lighting (where fitted)

13 Wine Rack (where fitted)

14 Deli Bin (where fitted)

15 Manual Control (where fitted)

16 Air Curtain Cooling

17 Food Compartment Light

Congratulations

Congratulations and thank you for choosing our refrigerator/

freezer. We are sure you will find your new appliance

a pleasure to use. Before you use the appliance, we

recommend that you read through the entire user manual,

which provides the description of the appliance and its

functions.

To avoid the risks that are always present when you use

an electric appliance, it is important that the appliance is

installed correctly and that you read the safety instructions

carefully to avoid misuse and hazards.

We recommend that you keep this instruction booklet for

future reference and pass it on to any future owners.

After unpacking the appliance please check it is not

damaged. If in doubt, do not use the appliance but contact

your local Electrolux Customer Care Centre.

Contents

• Important safety instructions 4

• Installing your new appliance 5

• Initial start up 6

• Electronic display controls – electronic models only 6

• Controlling the temperature 6

• Manual (rotary) controls – manual models 8

• How to use the features of your appliance 9

• Care and maintenance 11

• General information 12

• Troubleshooting 13

• Specifications 14

electrolux refrigeration contents i

environmental tip

Information on disposal for users

• Most of the packing materials are recyclable. Please

dispose of those materials through your local recycling

depot or by placing them in appropriate collection

containers.

• If you wish to discard this product, please contact your

local authorities and ask for the correct method of

disposal.

Please read the user manual carefully and store in a

handy place for later reference.

The symbols you will see in this booklet have these

meanings:

warning

This symbol indicates information concerning your

personal safety

caution

This symbol indicates information on how to avoid

damaging the appliance

tips and information

This symbol indicates tips and information about use

of the appliance

This symbol indicates tips and information about

economical and ecological use of the appliance

Meanings of symbols used in this manual are shown

below:

This symbol indicates never to do this

This symbol indicates always do this

warning

• If pressurised aerosol containers bear

the word ‘flammable’ and/or a small

flame symbol,

do not store them inside any refrigerator

or freezer.

If you do so you may cause an explosion.

• When you dispose of your old refrigerators

and freezers, remove any doors. Children can

suffocate if they get trapped inside.

• This appliance contains insulation formed with

flammable blowing gases. Avoid safety hazards by

carefully disposing of this appliance.

Important safety instructions

4 important safety instructions electrolux refrigeration

warning

The appliance must be plugged into its own

dedicated 220-240V, 50Hz AC electrical outlet.

It must be possible to disconnect the appliance from

the mains power supply; the plug must therefore be

easily accessible after installation.

Ensure that the electric outlet is properly earthed

to ground. Consult a qualified electrician if you are

unsure.

Do not use an extension cord or adapter plug.

If the power cord is damaged, it should be replaced

by a service technician or a qualified person.

Unplug the appliance before cleaning and before

changing the light bulb to avoid electric shock.

Never unplug the appliance by pulling on the power

cord. Always grip the plug firmly, and pull straight

out of the receptacle to prevent damaging the power

cord.

Choose a location that is not too cold - the

temperature should be above 10°C.

Put the appliance in a dry place, avoiding areas of

high moisture or humidity.

Don’t put the appliance in frosty or unprotected

areas, for example in a garage or on a verandah.

Don’t put the appliance in direct sunlight.

Don’t put the appliance near stoves, fires or heaters.

When correctly installed, your appliance should:

• have adequate clearance to the back and sides for air

circulation (refer to page 5).

• be aligned to the surrounding cupboards.

• have doors that will self-close from a partially open

position.

warning

• Have the stability foot in place (see diagram on page 5)

to prevent the appliance falling forward when a door

with heavy food load is opened.

5 installing your new appliance electrolux refrigeration

Clearance around your appliance

If you do not have a cupboard with a rear gap, the

recommended clearance area on top increases from

50mm to 90mm (x) and from 32mm to 72mm (y).

When positioned in a corner area, spacing of at least

350mm (400mm for E:Line models) on the hinge side will

allow the doors to open enough to enable the removal of

bins and shelves.

Note:

Doors are designed to sit proud of cabinetry (not flush).

Installing your appliance

The appliance should arrive with the front adjustable

rollers wound down to tilt the top of the appliance

backwards by about 10-15mm from upright.

The stability foot should also be wound fully up so it will not

interfere with the operation of the rollers (see diagram in Step

3).

caution

The rollers are designed for forward or backward

movement only. They are not castors. Moving the

appliance sideways may damage your floor and

the rollers.

1. Roll the appliance into its final position.

2. The top of the appliance should be tilted back by

approximately 10-15mm (see diagram above). This will

allow the doors to self-close providing a consistent

door seal.

3. If the appliance is not tilted back, you can adjust the

two front rollers by turning the large, plastic roller nut

(see diagram below). This will increase the height of

the rollers. One turn of the nut will tilt the appliance

back approximately 10mm. If you have difficulty

turning the roller nut you can have someone tilt the

appliance back, so that you have better access.

Alternatively, you can access the rollers from the side,

using a flat screwdriver to help you turn the nut (see

diagram below).

4. Check the alignment of the appliance to the

surrounding cupboards. The top of the appliance

should be level from side to side (see diagram below).

If you need to adjust the level, use the adjustable

rollers as discussed in Step 3.

5. If the appliance now rocks from one corner to the

opposite rear corner, this means that the floor is

uneven; you will need to put some packing under

one of the rear rollers.You could use thin pieces of

solid material, such as thin board, vinyl floor tiles or

laminate. Place the packing so that it will sit under

one of the rear rollers when the appliance is rolled into

position.

6. On certain floor surfaces the appliance may roll

forward during operation. Where provided a “Roller

Stop” can be placed under the front rollers.

7. You may now need to fine-tune the installation by

repeating Steps 3, 4 and 5.

8. When you have the appliance in final position, wind

the stability foot down until it just makes contact with

the floor. Whenever you need to move the appliance,

be sure to wind the foot back up so that the appliance

can roll freely.

9. Clean your appliance thoroughly following the

instructions on page 10 and wipe off any dust that has

accumulated during shipping.

10. Plug the appliance into the power point. Don’t use a

double adaptor. If you need to roll the appliance out to

get at the power point, remember to raise the stability

foot before you do so.

11. We recommend that you let your appliance run for two

to three hours before you put any food in it. This will

allow you to check that it is operating properly.

Congratulations! You have successfully installed your new

appliance.

Installing your new appliance

(x)

50mm

30mm

Recommended

airspace

CABINET

DOOR

350mm

(y)

10-15mm

Fixed rear

rollers

Height adjustable

front rollers

Top of refrigerator

is level ie. horizontal

Adjust fr

ont rollers

for uneveness of floo

eg. wind this roller

down or up

ligned to

cupboards

ie. even gap

Large plastic

ller nut

Stability foot

wound up

Roller Stop

Stability foot

wound down

6 initial start up/electronic display controls – electronic models electrolux refrigeration

The appliance transfers heat from food placed inside the

appliance to the outside air.

This process makes the rear, the sides and the area

adjacent to the doors, particularly at initial start up, feel

warm. This is normal.

There is a cooling coil located behind the rear wall of

the cabinet. This coil cools and removes moisture from

the air. A fan then circulates cold, dry air throughout the

cabinet.

This air circulation means that foods are refrigerated far

more quickly than in appliances where the air remains

relatively static.

Avoid placing food against air outlets as this will affect air

circulation (see diagrams on inside cover).

A light frosting will occasionally occur on the cold interior

of the freezer when the door is opened frequently. This

is normal and will disappear after a few days in most

climates.

Make sure you fully close the freezer door after you load

or remove food. If the door is left partly open, a heavy

frost will coat the inside of the freezer. If a frost develops,

remove it. Take care to properly close the door and the

frost will not reoccur.

Your new energy efficient appliance uses a high-speed

compressor and other energy efficient components that

may produce different noises to your old appliance.

These sounds are normal and include:

• compressor running noise.

• air movement noise from the small fan motor.

• occasional gurgling, similar to water boiling.

• a popping noise, heard during automatic defrosting.

• a clicking noise, just prior to the compressor starting

up.

These noises are normal and not cause for alarm.

Further details can be found on page 11.

tips and information

• On a top mount freezer (TM) refrigerator (where the

freezer is on top of the fresh food compartment):

Do not place food forward of the ribs on the bottom

of the freezer, it will keep the door open. So make

sure food is stored behind the ribs.

• On a bottom mount freezer (BM) refrigerator, single

door all refrigerator (AR) and single door all freezer

(AF):

Ensure freezer baskets and shelves are pushed

completely back to prevent them holding the door

open.

The electronic display panel consists of an LCD display

with blue backlighting and 7 push buttons. When the

power is first turned on, you will see the default settings,

with the white backlighting on.

If no buttons have been pressed and the fridge door is

closed the backlighting will turn off after 30 seconds.

tips and information

A good indication of optimal freezer temperature is

ice cream that is frozen, but still soft enough for easy

scooping.

For the fridge compartment, we recommend using

drinking water and simply adjusting the fridge controls

until the water is at your ideal temperature.

Controlling the temperature

The default temperature for the refrigerator is 3°C, with

a default of -18°C for the freezer. If you want to change

the temperatures, use the instructions below. You should

make only small adjustments and wait 24 hours to see

whether you need to make further changes.

Note:

When you set a temperature, you set an average

temperature for the whole appliance cabinet.

Temperatures inside each compartment may vary,

depending on how much food you store and where you

place it. High or low room temperature may also affect

the actual temperature inside the appliance.

Changing the freezer temperature

Press the freezer button to make the freezer colder in 1°C

steps. Once -23°C is reached the display will return to -

14°C with the next button press. You’ll notice that the bar

graph gets smaller with colder freezer settings.

Changing the refrigerator temperature

Press the fridge button to make the fridge colder in 1°C

steps. Once 0°C is reached the display will return to 7°C

with the next button press. The bar graph gets smaller

with colder settings.

Initial start up Electronic display controls – electronic

models only

Ribs

electrolux refrigeration electronic display controls – electronic models 7

Quick freeze function

Use the quick freeze function when you add a large

amount of food to the freezer compartment. This freezes

the food quickly but does not affect the temperature in

the refrigerator compartment.

To use this function, press the quick freeze button once.

An animated icon will light up. The quick freeze function

will now operate for 90 minutes. If you want to turn the

quick freeze function off before 90 minutes have passed,

simply press the quick freeze button again. The icon will

disappear and the freezer will return to normal operation.

Freezer temperature alarm

If the alarm is sounding for no apparent reason, check

whether anything is holding the door open.

If the freezer becomes too warm due to the freezer door

being left open or warm food being placed too close to the

temperature sensor in the freezer (see diagrams on inside

cover for the sensor location), a buzzer will sound, the icon

above the alarm reset button, the freezer set temperature

and bar graph will all flash until the alarm reset button is

pressed. Once pressed the alarm disable icon adjacent to

the alarm reset button will illuminate for 50 minutes, or until

the temperature reaches an acceptable level.

Make sure nothing is holding the freezer door open and

move any warm food away from the temperature sensor

(see diagrams on inside cover for the sensor location).

If the freezer is still too warm after 50 minutes the alarm

will sound again, indicating that something may be wrong

with your appliance.

Note:

The freezer temperature alarm can be reset for 12 hours

by pressing the alarm reset button continuously for 10

seconds.

Door alarm

If the refrigerator door is left open for longer than 2

minutes a buzzer will sound and an icon above the alarm

reset button will flash. The refrigerator temperature

settings and bar graph will also flash.

If you want to leave the door open while you load the

fridge, you can turn the alarm off for 8 minutes by

pressing the alarm reset button.

Drinks chill timer

To use the timer, press the drinks chill button once to set

a 10 minute time limit, twice for 20 minutes and three

times for 30 minutes. Press four times to turn the timer

off.

If you set the drinks chill timer it will sound an alarm to

remind you that you have left drinks in your freezer for

quick chilling.

An animated icon appears beside the drinks chill button

with a countdown timer.

The timer will count down in 1 minute increments; you

can change the time or turn the timer off even after the

countdown has started. When the countdown is finished

a buzzer will sound and the icon beside the alarm will

flash until the alarm reset button is pressed.

To stop the alarm and turn off the drinks chill timer, press

the alarm reset button. If your drink is chilled, take it out

of the freezer. If it is not cold enough, reset the drinks chill

function (remembering that the drink is already partially

chilled).

Suggested chilling times:

• 10 minutes for cans of drink

• 20 minutes for bottles of wine

• 30 minutes for bottles of soft drink.

8 manual (rotary) controls – manual models electrolux refrigeration

• Holiday mode

If you think that you will be away from your appliance for

an extended period and would like to take advantage of

maximum energy efficiency. Then, just before you leave press

the Holiday mode button once and the appliance will enter

Holiday Mode, as indicated by the umbrella and sun symbol.

Holiday mode will now operate until the button is pressed or

the refrigerator door is opened.

Note:

Opening the freezer door has no effect on the operation of

the Holiday Mode.

Setting the Clock

If no buttons have been pressed and the fridge door is

closed the backlighting will turn off after 30 seconds. The

display will go into clock mode. When the display is in clock

mode, you can view the refrigerator settings by pressing

the freezer, clock or fridge button once. This reactivates

the full display. Opening the fridge door also activates the

full display. However, the display will return to clock mode

30 seconds after the last button press or the closing of the

refrigerator door.

1) If the display is in clock

mode press the clock button

once to activate the display,

then press and hold the

clock button down for two

seconds; hours and minutes

will then appear on the

display

2) While holding down the

clock button, press the

freezer button to advance

the hours. (Hold the freezer

button down for continuous

and fast advance). After

the first 12 hours. The PM

indicator will appear.

3) While holding down the

clock button, press the

fridge button to advance the

minutes. (Hold the fridge

button down for continuous

and fast advance).

4) When the correct time is displayed, release the clock

button.

Turning the clock on and off

If the display is in clock mode, press the clock button once

to activate the display. then press the clock button once

to turn the clock off. The display will return to clock mode

30 seconds after the last button press or the closing of the

refrigerator door. (However the display will be blank because

the clock is OFF).

To turn the clock back on, press the clock button once while

the display is in clock mode..

Note: the time still advances while the display is off.

Controlling the temperature

Set the temperature by using the main temperature

controls at the rear of the refrigerator compartment.

When you first start your refrigerator, set both refrigerator

and freezer controls to MID. The refrigerator temperature

control is affected by altitude and it is recommended

that it be set warmer to compensate. e.g. At 1000 metres

above sea level set the refrigerator temperature control to

one setting warmer than MID.

tips and information

A good indication of optimal freezer temperature is

ice cream that is frozen, but still soft enough for easy

scooping.

For the fridge compartment, we recommend using

drinking water and simply adjusting the fridge controls

until the water is at your ideal temperature.

To change settings. When you change temperature

settings, make small adjustments and wait 24 hours

before assessing whether you need to make any further

changes.

tips and information

• Coldest freezer setting is not recommended in normal

and very hot climates as this will limit the cooling to

the refrigerator section.

• In very cold climates (where temperatures are below

10°C) the freezer may need to be set colder.

• Adjusting the refrigerator temperature – top mount

freezer (TM) model

1. Select the refrigerator control (bottom knob).

2. Rotate the knob clockwise to set colder.

3. Rotate the knob anti-clockwise to set less cold.

• Adjusting the freezer temperature – top mount freezer

(TM) model

1. Select the freezer control (top knob).

2. Rotate the knob clockwise to set colder.

3. Rotate the knob anti-clockwise to set less cold.

Manual (rotary) controls – manual models

electrolux refrigeration how to use the features of your appliance 9

• Adjusting the refrigerator temperature – bottom

mount freezer (BM) model

1. Select the refrigerator control (top knob).

2. Rotate the knob clockwise to set colder.

3. Rotate the knob anti-clockwise to set less cold.

• Adjusting the freezer temperature – bottom mount

freezer (BM) model

1. Select the freezer control (bottom knob).

2. Rotate the knob clockwise to set colder.

3. Rotate the knob anti-clockwise to set less cold.

This section tells you how to make the most of the

refrigerator’s many useful features and how to clean them.

DOOR STORAGE BINS

Both the refrigerator and freezer have door storage bins.

You can adjust the refrigerator bins to meet different

storage needs. All the door bins are completely removable

for cleaning. If you want to remove or adjust a bin, lift it

over the support lugs on the inner door panel. Push the bin

down over the support lugs to lock it in place.

DAIRYCOMPARTMENT (WHERE FITTED)

You can use the Dairy Compartment to store foods such

as butter, margarine and cheese. The Dairy Compartment

is slightly warmer than the rest of the refrigerator

compartment.

CONVERTABIN

You can use the Converta Bin to store vegetables, fruit or

small goods. You can change the humidity inside the bin by

adjusting a humidity slide control.

STORING VEGETABLES

You should store vegetables in the Converta Bin

remembering to set the humidity

slide control to the vegetable

indicator.

STORING FRUIT AND

SMALLGOODS

You can also store fruit in the

Converta Bin remembering to set

the humidity control to the fruit

indicator.

CONVERTABIN AND SHELF

REMOVAL

• Remove Converta Bin(s) by

pulling forward, then up and further

forward.

• Remove the glass (if fitted) by

pushing up from the underside.

Handle the glass with care.

• Lift the catches on the underside

of the shelf and pull the shelf

forward.

How to use the features of your

appliance

10 how to use the features of your appliance electrolux refrigeration

STORE SAFE BIN(S) (WHERE FITTED)

These bins are designed for the storage of items such as

cosmetics and medicines and slide out for easy access.

The left hand bin has a lock that is operated by turning

the knob located on the fixed area between the bins. This

may be turned with a coin.

Do not store solvents or flammable materials such

as nail polish remover or lighter fluid inside your

refrigerator. They will affect the life of the plastic

components and may taint stored food.

REMOVALOF THE STORE SAFE BIN

You can remove the Store Safe Bin(s) for cleaning.

Remove the bin by simply pulling past the stop in the

runners, you need to lift the bin while pulling it forward.

Note: A small amount of force is required to overcome

the front stop.

THE DELI BIN (WHERE FITTED)

You can use the Deli Bin to store foods such as small

goods, fresh or cooked meat and cheese.You can also

use it as an additional crisper. The bin will prevent

strong food odours or smellsgoing into the rest of the

refrigerator.To remove the Deli Bin, pull it forward, then lift

it up and pull it further forward.

SPILL SAFE GLASS SHELVES (where fitted)

Spill safe glass shelves keep spills on the shelf. A shelf

retaining system minimizes accidental movement of

shelves. The shelves can be adjusted to many different

heights. Spill safe glass shelves are not to be used as

slide out shelves.

WIRE SHELVES (WHERE FITTED)

To remove these shelves from the cabinet, lift the rear of

the shelf and pull forward.

WINE RACK (WHERE FITTED)The wine rack can be used

to store various types of bottles such as wine or beer.

Bottlesshould be stored with the bottom end towards the

back of the refrigerator. If you want toremove the wine

rack or change its position, lift the rear of the rack and

pull forward.

FREEZER BASKETS (WHERE FITTED)

Freezer Baskets and a Freezer Shelf are fitted to bottom

freezer refrigerators.

Wire baskets areused to provide easy visibility of the

contents. Both the baskets and the shelf pull out for

easyaccess and have a stop to prevent the basket and

shelf being pulled out too far.

To remove the basket or shelf pull it out until it hits

thestop then lift the front to unhook the stop while

continuingto pull forward.

• Freezer light (where fitted)

1. Switch off the power at the power point and

remove the refrigerator’s power cord from the

power point.

2. Carefully unclip the light cover. You do this by

pulling the light cover tab at the rear towards the

front of the cabinet.

3. Unscrew the light bulb and replace it with a bulb

that is the same as the original.

4. Replace the light cover by hooking the light cover

lugs into the front of the housing and pressing the

rear of the cover up until it clips in.

5. Wait 5 minutes to ensure pressures in the

refrigeration system are equalized. Then reconnect

and turn the refrigerator on at the power point.

electrolux refrigeration care and maintenance 11

Changing the light bulb

•Refrigerator Light

1. Switch off the power at the power point and

remove the refrigerator’s electric cord fromthe

power point.

2. Carefully unclip the light cover. You do this by

pulling the light cover tab at the reartowards the

front of the cabinet.

3. Unscrew the light bulb and replace it with a bulb

that is the same as the original (25 watts)

4. Replace the light cover by hooking the light cover

lugs into the front of the housing and pressing the

rear of the cover up until it clips in.

5. Wait 5 minutes to ensure pressures in the

refrigeration system are equalized. Then turn the

refrigerator on at the power point.

Care and maintenance

Top freezer model

(electronic models only)

12 care and maintenance/general information electrolux refrigeration

Cleaning the appliance

warning

BEFORE CLEANING: Turn appliance off at the power

point, then remove power cord from socket. This will

make sure there is no chance of getting an electric

shock.

• Doors and exterior – white

You should only clean the doors with luke-warm

soapy water and a soft cloth, rinsing with clean water

and then wipe the surface with clean water and a soft

clean cloth to remove soap residue.

• Doors and exterior – stainless steel

Your stainless steel appliance is manufactured from

a mark resistant stainless steel. This stainless steel

has a special advanced protective coating that eases

the removal of marks such as finger prints and water

spots. To keep your stainless steel appliance looking

at its best, you should clean it regularly. You should

only clean the stainless steel doors with luke-warm

soapy water and a soft cloth, rinsing with clean water

and then wipe the surface with clean water and a soft

clean cloth to remove soap residue.

It is important to wipe in the direction of the grain

of the stainless steel to avoid undue marking of the

surface.

caution

Do not use stainless steel cleaners, abrasive pads or

other cleaners as they are likely to scratch the surface.

Damage to this product after delivery is not covered by

your warranty

• Interior

You should clean the appliance interior regularly.

It will be easiest to clean when the food supply

is low. Wash the interior with a soft cloth and use

an unscented mild soap with luke-warm water.

Thoroughly dry all surfaces and removable parts.

Avoid getting water on appliance controls. If you have

taken out any removable parts, replace them and

switch the power on before re-stocking the appliance

with food. Naturally, you should keep the interior of

your appliance hygienic by promptly and thoroughly

wiping up any food spills.

• Door seals

Take care to keep door seals clean. Sticky food and

drink can cause seals to stick to the cabinet and

tear when you open the door. Wash seal with a mild

detergent and warm water. Rinse thoroughly and dry.

caution

Never use hot water, solvents, commercial kitchen

cleaners, aerosol cleaners, metal polishes, caustic or

abrasive cleaners, or scourers to clean this appliance, as

they will damage it. Many commercially available cleaning

products and detergents contain solvents that will

damage your refrigerator. When cleaning, use only a soft

cloth with an unscented mild soap and luke warm water.

Safety

It is important to use your appliance safely. This means

you need to supervise young children and infirm persons

when they use it. You need to make sure that young

children do not play with the appliance. Follow the tips

below.

always do this

Check the power point is properly grounded - if you

are not sure get an electrician to check it.

Switch off the appliance at the power point before

you clean or move it.

If the supply cord is damaged you should have it

replaced by the manufacturer, it’s service agent or

similarly qualified person. This will prevent a safety

hazard.

never do this

Never let children play with the appliance.

Never store spray cans, explosive liquids or

flammable liquids in the refrigerator.

Never store fizzy drinks in the freezer compartment.

Never lick icy foods when they first come out of the

freezer. This can freeze burn your lips and mouth.

Never try to repair the appliance yourself.

Never use electric heaters or dryers to defrost the

freezer because you can receive an electric shock.

Never use electrical appliances inside the food

storage areas.

This appliance contains insulation formed with

flammable blowing gases. For safety reasons, take

care when you dispose of it.

Do not damage the appliance circuit.

warning

When you dispose of your old refrigerator or freezer,

remove any doors. Children can suffocate if they get

trapped inside.

Switching off your appliance

If the appliance needs to be switched off for an extended

period, the following steps should be taken to reduce the

symptoms of mould:

1. Remove all food.

2. Remove the power plug from the power point.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged open slightly for

air circulation.

General information

electrolux refrigeration troubleshooting 13

Troubleshooting

If you think something may be wrong with your

refrigerator, you can carry out some easy checks before

calling for service. You may locate the problem, sparing

yourself from inconvenience and saving time and money.

problem solution

When your appliance

is not operating

• Check that the power cord is plugged

into the power outlet properly and that

the outlet is switched ‘ON’.

• Try running another appliance from the

power outlet. If no power is coming from

the outlet you may have blown a fuse

or tripped a circuit of your household

power supply.

• Try adjusting the temperature control to

a slightly “colder” position.

• It is normal for the freezer fan NOT to

operate during the automatic defrost

cycle, or for a short time after the

appliance is switched on.

When there is

refrigerator/freezer

noise

Modern refrigerators/freezers with

increased storage capacity use high

speed compressors. These can provide

a seemingly high level of sound which is

quite normal. Normal operational sounds

include:

• Occasional gurgling, similar to water

boiling.

• Air flow noise (air circulates because of

a small fan).

• A popping noise heard during automatic

defrost.

• A clicking noise heard just before

the compressor starts (this is merely

the automatic switching action of

the temperature control, turning the

compressor on or off).

Other strange sounds may mean that

you need to check and take action. For

example, noises may mean that:

• The cabinet is not level.

• The floor is uneven or weak.

• Bottles are badly placed and rattling.

• There are vibrations from an object

on top of or behind or beside the

refrigerator.

• The back of the refrigerator cabinet is

touching the wall.

Remember it is quite normal for noise

to seem louder just after the refrigerator

starts operating.

If there are odours

inside the appliance

• The interior may need cleaning.

• Some foods produce odours.

• Some containers and wrapping can

cause odours.

• Ask yourself if the odour started about

the same time you started storing

something unusual.

When the motor

seems to run more

than expected

Your new appliance provides you with

large capacities in both the refrigerator

section and the separate freezer. It is

normal for the motor to operate frequently.

However, to keep operation to a minimum,

check the following:

• Are doors kept open too long or too

often?

• Are controls set too cold? Refer to page

6 “Controlling temperature”.

• Have large amounts of warm food just

recently been stored? Summer, festive

seasons and holidays usually mean a lot

more work for your appliance.

• If the day is hot or the room is very

warm, the appliance will need to run

more than normal.

• The appliance will run more than normal

just after you install it or when it has

been turned off for a long time.

If the temperature in

the refrigerator is too

warm

• Check that the appliance has enough

clearance at the sides, back and top.

Refer to page 2 “Installing your new

appliance”.

• Refer to page 6 “Controlling

temperature”.

• You may have kept the door open too

long or too frequently.

• Food containers or packaging may be

holding a door open.

If the temperature

in the refrigerator is

too cold

• Refer to page 6 “Controlling

temperature”.

• Increase the temperature to avoid high

energy consumption.

If heavy frosting

occurs in the freezer

Make sure you fully close the freezer and

fridge doors. If the doors are left partly

open a heavy frost will coat the inside of

the freezer. If a frost develops, remove it.

Take care to properly close the doors and

the frost will not reoccur.

If water drips on the

floor

The defrost water tray, (located on the

compressor at the back of the cabinet),

may not be properly positioned, or the

drain tube may not be properly positioned

to direct water into this tray. You may need

to pull the refrigerator away from the wall

to check the tray and tube.

If you still require service

If you have a problem, and the problem persists after

you have made the checks mentioned above, contact

your nearest approved Service Centre or the dealer you

bought the refrigerator from. Be ready to quote the model

number, 9-digit PNC and 8-digit serial number, which is

stated on the label inside the refrigerator compartment.

14 specifications electrolux refrigeration

ITEM

MODEL GROUP

Top Freezer

Model

Bottom Freezer

Model

DIMENSIONS (cm)

HEIGHT 172.0 172.0

WIDTH 80.2 80.2

DEPTH 74.3 74.3

POWER SUPPLY VOLTAGE AND

FREQUENCY

220-240v 50Hz

TOTAL POWER ABSORBED (W)

*AVERAGE DAILY UNITS ELECTRICITY (kWh) 1.07 1.19

GROSS CAPACITY (litres)

FRIDGE 395.7 348.7

FREEZER 121.4 156.3

STORAGE CAPACITY (litres)

FRIDGE 377.3 330.6

FREEZER 98.4 132.7

*This figure is based on standard test results in accordance with European Standard EN 153. Actual

consumption will depend on how the appliance is used and where it is located.

This appliance complies with E.E.C Directive No. 87/308 of 2-6-87 relative to radio interference

suppression

This appliance complies the following E.E.C Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 EEC of 3-5-89 (Electromagnetic Compatibility Directive) and subsequent modifications

The symbol on the product or on its packaging indicates that this product may not be treated as household waste.

Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For

more detailed information about recycling of this product, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

MODE D’EMPLOI

LA RÉFRIGÉRATION

SANS GIVRE

FRE

Modèle avec congélateur dans la partie supérieure

Modèle avec congélateur dans la partie inférieure

Remarque : les illustrations de produits servent à expliquer les diverses fonctions mais ne

correspondent pas forcément exactement aux produits actuels.

ii Table des matières

1 Bacs du congélateur

2 Double compartiment pour produits

laitiers

3 Bac de stockage sécurisé (lorsqu’il en

est équipé)

4 Bacs de porte modulables

5 Sorties d’air à débit multiple

6 Casiers à bouteilles

7 Bac(s) à légumes

8 Eclairage partiel (lorsqu’il en est équipé)

9 Porte-bouteilles (lorsqu’il en est équipé)

10 Bac à charcuterie (lorsqu’il en est équipé)

11 Lumière du compartiment à aliments

12 Refroidissement par rideau d’air

13 Retours d’air du congélateur

14 Couvercle du compartiment à glaçons et

bac de rangement

15 Lumière du congélateur (lorsqu’il en est

équipé)

16 Sorties d’air du congélateur

17 Capteur de température du congélateur

1 Double compartiment pour produits

laitiers

2 Bac de stockage sécurisé (lorsqu’il en est

équipé)

3 Bacs de porte modulables

4 Sorties d’air à débit multiple

5 Casiers à bouteilles

6 Sorties d’air du congélateur

7 Couvercle du compartiment à glaçons et

bac de rangement

8 Paniers du congélateur

9 Retours d’air du congélateur

10 Clayette supérieure du congélateur

11 Bac(s) à légumes

12 Eclairage partiel (lorsqu’il en est équipé)

13 Porte-bouteilles (lorsqu’il en est équipé)

14 Bac à charcuterie (lorsqu’il en est équipé)

15 Manual Control (where fitted)

16 Air Curtain Cooling

17 Lumière du compartiment à aliments

Félicitations

Avant d’utiliser cet appareil, nous vous recommandons de

lire entièrement le manuel de l’utilisateur qui fournit une

description du produit et de ses fonctions.

An d’éviter les risques inhérents à l’utilisation d’un

appareil électrique, il est important que le réfrigérateur soit

installé correctement et que vous preniez connaissance

des instructions de sécurité an d’éviter une mauvaise

utilisation et écarter les dangers.

Nous vous conseillons de conserver ce manuel pour une

consultation ultérieure et nous vous recommandons de

le remettre aux futurs propriétaires en cas de cession de

l’appareil.

Une fois l’appareil déballé, veuillez vérier qu’il ne soit

pas endommagé. En cas de doute, ne l’utilisez pas et

contactez votre centre de services Electrolux le plus

proche.

Table des matières

• Consignes importantes concernant la sécurité 4

• Installation de votre nouvel appareil 5

• Première mise en marche 6

• Commandes à afchage électronique –

modèles électroniques uniquement 6

• Contrôle de la température 6

• Comment utiliser les fonctions de votre appareil 9

• Entretien et maintenance 11

• Informations générales 12

• Localisation des pannes 13

• Spécications 14

Réfrigération, table des matières i

Conseil pour l’environnement

Informations concernant la mise au rebut

• La majorité des matériaux d’emballage sont

recyclables. Veuillez les déposer au centre de recyclage

local ou les placer dans les bacs à ordure appropriés.

• Si vous souhaitez jeter ce produit, veuillez contacter les

autorités locales pour connaître la procédure à suivre.

Veuillez lire attentivement ce mode d’emploi et

conservez-le à portée de main pour une consultation

ultérieure.

Les symboles utilisés dans ce livret ont les signications

suivantes :

Avertissement

Ce symbole est associé à une information concernant

votre propre sécurité

Attention

Ce symbole est associé à une information permettant

d’éviter d’endommager l’appareil

Conseils et informations

Ce symbole est associé aux conseils et informations

concernant l’utilisation de l’appareil

Conseil pour l’environnement

Ce symbole est associé aux conseils et informations

concernant une utilisation économique et écologique

de l’appareil

Les signications des symboles utilisés dans ce manuel

sont indiquées ci-dessous :

Ce symbole indique de ne jamais faire cela

Ce symbole indique de toujours faire cela

Avertissement

• Si des aérosols pressurisés comportent

le terme “inammable” et/ou le symbole

d’une petite amme, ne les stockez pas

au réfrigérateur ni au congélateur.

Cela pourrait provoquer une explosion.

• Lors de la mise au rebut de vos anciens

réfrigérateurs et congélateurs, retirez les portes.

Il existe un risque de suffocation si des enfants se

retrouvent coincés à l’intérieur.

• Cet appareil renferme une isolation formée par

des gaz inammables. Evitez tout danger pour la

sécurité en respectant les consignes d’élimination

de ce produit.

Consignes importantes concernant la

sécurité

4 Consignes importantes concernant la sécurité

Avertissement

Cet appareil doit être branché seul (sans prise

multiple) dans une prise électrique de 220-240 V, 50

Hz CA.

Il doit être possible de débrancher l’appareil de

l’alimentation générale ; par conséquent la prise doit

être facilement accessible après installation.

Veillez à ce que la prise électrique soit correctement

mise à la terre. Faites appel à un électricien

professionnel en cas de doute.

N’utilisez pas de rallonge ni d’adaptateur.

Si le cordon d’alimentation est endommagé, celui-ci

doit être remplacé par un technicien de maintenance

ou une personne qualiée.

Débranchez l’appareil avant de le nettoyer et avant

de changer l’ampoule an d’éviter les risques

d’électrocution.

Ne débranchez jamais l’appareil en tirant sur le

cordon d’alimentation. Saisissez toujours fermement

la prise et tirez droit pour ne pas endommager le

cordon d’alimentation.

Choisissez un endroit qui ne soit pas trop froid ; la

température doit être supérieure à 10 °C.

Mettez l’appareil dans un endroit sec en évitant les

zones humides.

Ne mettez pas l’appareil dans un endroit non protégé

ou exposé aux gelées comme un garage ou une

véranda.

Ne placez pas l’appareil à la lumière directe du soleil.

Ne placez pas l’appareil à proximité de cuisinières,

cheminées ou chauffage.

Une fois bien installé l’appareil doit :

• disposer d’un espace sufsant à l’arrière et sur les

côtés pour la circulation de l’air (se reporter à la

page 5).

• être aligné avec les placards environnants.

• avoir les portes qui se referment automatiquement

depuis une position partiellement ouverte.

Avertissement

• Mettez les pieds stabilisateurs en place (voir le

schéma page 5) pour éviter que l’appareil ne tombe

en avant lorsque la porte très chargée est ouverte.

5 Installation de votre nouvel appareil

Espace autour de votre appareil

Si vous ne disposez pas d’un placard avec un espace à

l’arrière, l’espace recommandé en haut augmente de 50

mm à 90 mm (x) et de 32 mm à 72 mm (y).

Lorsqu’il est placé dans un coin, un espace d’au moins

350 mm (400 mm pour les modèles de la ligne E) du côté

des charnières permettra d’ouvrir sufsamment la porte

pour retirer les bacs et les clayettes.

Remarque :

Les portes sont conçues pour être quelque peu

éloignées du meuble (pas exactement au même niveau).

Installation de votre appareil

L’appareil doit arriver avec les pieds avant réglables

roulants étendus an de surélever l’avant de l’appareil de

10 à 15 mm.

Le pied stabilisateur doit également être entièrement

remonté an de ne pas gêner le fonctionnement des pieds

roulants (voir le schéma de l’étape 3).

Attention

Les pieds roulants ont été conçus pour des mouvements

en avant ou en arrière uniquement. Ils ne pivotent pas. Le

déplacement latéral de l’appareil pourrait endommager le

sol et les pieds roulants.

1. Faites rouler l’appareil jusqu’à sa position nale.

2. Le haut de l’appareil doit être incliné vers l’arrière de

10 à 15 mm environ (voir schéma ci-dessus). Cela

permet une fermeture automatique et hermétique des

portes.

3. Si l’appareil n’est pas incliné vers l’arrière, vous pouvez

régler les deux pieds roulants avant en tournant le

grand écrou en plastique (voir schéma ci-dessous).

Cela augmentera la hauteur des pieds roulants. Un

tour d’écrou inclinera l’appareil vers l’arrière d’environ

10 mm. Si vous éprouvez des difcultés à tourner

l’écrou, vous pouvez demander à quelqu’un de

maintenir l’appareil incliné vers l’arrière an de vous

permettre un meilleur accès. Alternativement, vous

pouvez accéder aux pieds roulants latéralement, en

utilisant un tournevis plat pour vous aider à tourner

l’écrou (voir schéma ci-dessous).

4. Vériez que l’appareil soit bien aligné avec les placards

environnants. Le haut de l’appareil doit être de niveau

(voir schéma ci-dessous). Si vous devez ajuster

le niveau, utilisez les pieds roulants ajustables tel

qu’expliqué à l’étape 3.

5. Si l’appareil bascule d’avant en arrière, cela signie

que le sol n’est pas plat ; le cas échéant, placez une

cale sous l’un des pieds roulants arrière. Vous pouvez

utiliser un petit morceau de matériau solide comme un

feuillet de bois, un morceau de tapis vinylique ou de

contre-plaqué. Placez la cale de sorte à ce qu’elle se

positionne sous l’un des pieds lorsque l’appareil est

remis en place.

6. Sur certains sols, il se peut que l’appareil avance

pendant le fonctionnement. Le cas échéant, un

dispositif de blocage de pied roulant peut être placé

sous les pieds avant.

7. Vous devrez peut être parfaire l’installation en

reprenant les étapes 3, 4 et 5.

8. Une fois l’appareil dans sa position nale, abaissez

le pied stabilisateur jusqu’à ce qu’il touche le sol.

Lorsque vous devez déplacer l’appareil, assurez-vous

de remonter le pied an qu’il puisse rouler librement.

9. Nettoyez minutieusement votre appareil en suivant

les instructions de la page 10 et essuyez la poussière

accumulée pendant le transport.

10. Branchez l’appareil. N’utilisez pas de prise multiple.

11. Nous vous recommandons de laisser fonctionner

l’appareil pendant deux à trois heures avant de placer

la nourriture. Cela vous permettra de vérier qu’il

fonctionne correctement.

Félicitations ! Vous avez réussi l’installation de votre

nouvel appareil.

Installation de votre nouvel appareil

Espace vide

recommandé

PORTE DE

L’ARMOIRE

Pieds avant

réglables roulants

Pieds arrières

fixes

ligné sur les

placards,

c’est à dire

que l’espace

doit être régulier

Le haut du

réfrigérateur

est de niveau,

c’est à dire

horizontal

Ajustez les pieds

roulants avant en

cas d’irrégularité

du sol, par ex.

remontez ou

abaissez ce pied

Pied stabilisateur

remonté

Grand écrou

en plastique

Dispositif de blocage

Pied stabilisateur

étendu

6 Première mise en marche/commandes à af chage électronique – modèles électroniques

L’appareil évacue la chaleur des aliments qu’il contient

vers l’extérieur. En raison de ce processus, lors de la

première mise en marche, l’arrière, les côtés et la zone

près de la porte dégagent de la chaleur. Cela est normal.

Un serpentin de refroidissement se trouve derrière la paroi

arrière de la carrosserie. Le serpentin sert à refroidir et à

retirer l’humidité de l’air. Un ventilateur fait alors circuler

de l’air froid et sec dans le réfrigérateur. La circulation

de l’air signi e que les aliments sont réfrigérés bien plus

rapidement que dans les appareils où l’air ne circule pas.

Evitez de placer des aliments contre les sorties d’air car

cela entraverait la circulation de l’air (voir les schémas

sur la couverture interne). Un léger givre apparaîtra

occasionnellement à l’intérieur du réfrigérateur lorsque la

porte est fréquemment ouverte. Ce phénomène est normal

et disparaîtra en quelques jours dans la plupart des climats.

Assurez-vous de bien refermer la porte du congélateur

après avoir ajouté ou retiré des aliments. Si la porte est

partiellement ouverte, un givre épais recouvrira l’intérieur

du congélateur. Faites attention à bien refermer la porte et

vous éviterez toute nouvelle formation de givre.

Votre appareil utilise un compresseur haute pression et

d’autres composants à faible consommation d’énergie

susceptibles de produire un bruit différent de celui de votre

ancien appareil.

Ces sons sont normaux et incluent :

• Le bruit de fonctionnement du compresseur.

• Le bruit du mouvement de l’air produit par le moteur du

petit ventilateur.

• Des gargouillements occasionnels, évoquant de l’eau qui

bout.

• Des bruits secs, émis lors du dégivrage automatique.

• Un cliquetis, émis juste avant la mise en marche du

compresseur.

Vous trouverez de plus amples détails en page 11.

Conseils et informations

• En ce qui concerne un réfrigérateur avec congélateur

dans la partie supérieure (lorsque le congélateur est

au-dessus du compartiment pour produits frais) :

Ne placez pas d’aliments dépassant des nervures

en bas du congélateur, cela empêcherait de fermer

la porte. Assurez-vous que les aliments sont stockés

derrière les nervures.

• En ce qui concerne un réfrigérateur avec congélateur

dans la partie inférieure :

Veillez à ce que les paniers et les clayettes du

congélateur soient poussés à fond a n qu’ils

n’empêchent pas la fermeture de la porte.

Le panneau d’af chage

électronique se compose

d’un af chage LCD

avec un rétroéclairage

bleu et de sept boutons

poussoirs. Lors de

la première mise en

marche, les réglages par défaut s’af cheront, avec le

rétroéclairage bleu allumé. Si aucun bouton n’a été activé et

si la porte est fermée, le rétroéclairage s’éteindra au bout de

30 secondes.

Contrôle de la température

La température par défaut du réfrigérateur est de 3 °C et

de –18 °C pour le congélateur. Si vous souhaitez modi er

les températures, suivez les instructions ci-dessous. Vous

ne devriez réaliser que de petits ajustements et attendre 24

heures pour voir si d’autres modi cations sont nécessaires.

Remarque :

Lorsque vous réglez une température, il s’agit d’une

température moyenne pour tout l’appareil. Les températures

des différents compartiments peuvent varier, en fonction de

la quantité de nourriture stockée et de la manière dont elle

est rangée. Une température ambiante faible ou élevée peut

également affecter la température à l’intérieur de l’appareil.

Changement de la température du congélateur

Appuyez sur le bouton du congélateur a n de réduire la

température par pas

de 1 °C. Une fois la

température de – 23

°C atteinte, l’af chage

repassera à – 14 °C

lorsque la touche est

de nouveau activée.

Le graphique à barres

diminue pour les réglages de congélateur les plus froids.

Changement de la température du réfrigérateur

Appuyez sur le bouton du réfrigérateur a n de réduire la

température par pas

de 1 °C. Une fois la

température de 0 °C

atteinte, l’af chage

repassera à 7 °C lorsque

la touche est de nouveau

activée. Le graphique à

barres diminue pour les

réglages les plus froids.

Fonction de surgélation (quick freeze)

Utilisez la fonction de surgélation lorsque vous ajoutez

une grande quantité

de nourriture dans le

congélateur. Cette

fonction congèle

rapidement la nourriture

mais n’affecte pas

la température du

réfrigérateur.

Pour l’utiliser, appuyez

une fois sur la touche de surgélation. Une icône animée

s’allume. La fonction de surgélation dure 90 minutes. Si

vous souhaitez l’inactiver avant la  n des 90 minutes,

appuyez de nouveau sur la touche de surgélation. L’icône

disparaîtra et le congélateur reprendra un fonctionnement

normal.

Première mise en marche Commandes à af chage électronique

Nervures

Appuyez sur le bouton du congélateur a n de réduire la

La pagina sta caricando ...

Electrolux ENB5298XREEN Manuale utente

Marca: Electrolux

Modello: ENB5298XREEN

Categoria: Frigo-congelatori

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Electrolux ENB5298XREEN User manual
français: Electrolux ENB5298XREEN Manuel utilisateur
Türkçe: Electrolux ENB5298XREEN Kullanım kılavuzu

Electrolux ENB5298XREEN Manuale utente

Electrolux ENB5298XREEN Manuale utente

in altre lingue

Altri documenti