LG WM3001HRA Manuale del proprietario

Before beginning installation, read these

instructions carefully. This will simplify installation and

ensure that the washer is installed correctly and safely.

Leave these instructions near the

washer after installation for future reference.

USER’S GUIDE &

INSTALLATION INSTRUCTIONS

P/No. MFL31245164

Avant de commencer à installer votre machine à laver, lisez atten-

tivement ces instructions. Cela simpliﬁera votre installation et as-

surera que la machine à laver est installée correctement et en toute

sécurité. Conservez ces instructions à proximité de la machine à

laver après son installation, pour référence future.

Model/Modèle

WM3001H*A

Designed specially to use only

HE (High-Efﬁciency) detergent

Spécialement conçu pour

utilisation avec un détergent haute ef-

ﬁcacité uniquement

STEAM WASHER

TM

GUIDE DE L’UTILISATEUR ET

DIRECTIVES D’INSTALLATION

STEAM WASHER

MC

To contact LG Electronics, 24 hours a day,

7 days a week:

1-888-LGCANADA

Or visit us on the Web at: ca.lge.com

Pour contacter LG Electronics, 24 heures par

jour, 7 jours par semaine :

1-888-LGCANADA

Ou visitez notre site Web à l’adresse : ca.lge.com

Protocol P172

Sanitization Performance of Residential and

Commercial, Family Sized Clothes Washers

Protocole P172

Performance en matière d'assainissement des laveuses

résidentielles et commerciales de grande taille

Congratulations on your purchase

and welcome to the LG family.

Your new LG Steam Washer™

combines the most advanced

washing technology with simple

operation and high efficiency.

By following the operating and care

instructions in this manual, your

washer will provide you with many

years of reliable service.

THANK YOU!

I N T RO D U C T I O N

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations With Optional Pedestal Base

or Stacking Kit ...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line .................................... 13

Leveling the Washer ............................................. 14

HOW TO USE

Sorting Wash Loads ............................................. 15

Selecting Detergent .............................................. 16

About the Dispenser ............................................. 16

Loading the Dispenser ......................................... 17

Control Panel Features ......................................... 18

Cycle Guide .......................................................... 19

The LCD Display ................................................... 20

Operating the Washer .......................................... 21

Steam Cycles ....................................................... 22

Cycle Setting Buttons .......................................... 23

Special Function Buttons ..................................... 24

Custom Program .................................................. 25

Secondary Functions ........................................... 25

The Option Button ............................................... 26

Special Care Cycles ............................................. 26

PARTS AND FEATURES

Special Features ..................................................... 7

Key Parts and Components ................................... 8

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 31

Before Calling for Service ............................... 31–33

CARE AND CLEANING

Regular Cleaning .................................................. 27

Cleaning the Washer ............................................ 28

Maintenance ................................................... 29–30

WARRANTY ................................................... 35

SPECIFICATIONS/OPTIONAL ACCESSORIES

IMPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions .................................. 3–6

Key Dimensions and Speciﬁ cations ..................... 34

Optional Accessories ........................................... 34

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on the

rating plate on the front of the washer.

2

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

wDANGER: You can be killed or seriously injured if you don’t immediately follow instructions.

wWARNING: You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

3

READ ALL INSTRUCTIONS BEFORE USE

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other ﬂ ammable or

explosive substances, as they give off vapors that could

ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

ﬂ ammable or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.

If the hot water system has not been used for such a

period, before using the washer, turn on all hot water

faucets and let the water ﬂ ow from each for several

minutes. This will release any accumulated hydrogen

gas. As the gas is ﬂ ammable, do not smoke or use an

open ﬂ ame during this time.

• Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is

used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualiﬁ ed individual.

• See Installation Instructions for grounding

requirements.

• ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch ﬁ re.

• Use fabric softeners or products to eliminate static only

as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water taps and unplug the washer if the

machine is to be left for an extended period of time,

such as during vacations.

• Do not use to dry articles containing foam rubber or

similarly textured rubber-like materials.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging from

children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

BASIC SAFETY PRECAUTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in accordance with all

local codes and ordinances.

GROUNDING INSTRUCTIONS

wWARNING: Improper connection of the equipment-grounding conductor can result in risk

of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance. If it does not fit the

outlet, have a proper outlet installed by a qualified electrician. Failure to follow these warnings can cause

serious injury, fire, electrical shock, or death.

4

• Refer to INSTALLATION INSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed in the washer for installer’s

reference. If the washer is moved to a new location,

have it checked and reinstalled by a qualiﬁed service

person. Failure to follow this warning can cause

serious injury, ﬁre, electrical shock, or death.

• Do not, under any circumstances cut or remove

the third (ground) prong from the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet to

minimize the possibillty of electric shock hazard from

this appliance.

• This washer must be plugged into a 120VAC, 60Hz

grounded outlet. Failure to follow this warning can

cause serious injury, ﬁre, electrical shock, or death.

• Have the wall outlet and circuit checked by a

qualiﬁed electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• Where a standard 2-prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

• Do not install on carpet. Install washer on a solid

ﬂoor. Failure to follow this warning can cause serious

leak damage.

• Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow these warnings can

cause serious injury, ﬁre, electrical shock, or death.

• The washer should always be plugged into its

own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a ﬁre hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug ﬁrmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, ﬁre, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• The washer must be installed and electrically

grounded by a qualiﬁed service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

• Washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in back or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• Do not install the washer in humid spaces to

reduce the risk of electric shock. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

SAFETY INSTRUCTIONS FOR INSTALLATION

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

5

I M P O RTA N T S A F E T Y I N S T RU C T I O N S

SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL

•

Unplug the washer before cleaning to avoid the

risk of electric shock.

•

Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the ﬁ nish.

•

Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

•

Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

ﬁ re by itself.

•

Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury, ﬁ re, electrical

shock, or death.

•

Do not combine laundry products for use

in one load unless speciﬁ ed on the label.

•

Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

Incorrect usage can produce poisonous gas,

resulting in serious injury or death.

•

Do not reach into the washer while parts are

moving. Before loading, unloading, or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury, ﬁ re, electrical

shock, or death.

•

Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances. Failure to

comply with these warnings could result in serious

personal injuries.

•

Destroy the carton, plastic bag, and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuries.

•

Keep laundry products out of children’s reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

•

Remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside before your washer is

removed from service or discarded. Failure to do

so can result in serious personal injury or death.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

6

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁ re or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

PA RT S A N D F E AT U R E S

3

2

1

6

4

5

SPECIAL FEATURES

7

3

1

2

6

4

5

7

DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate

dispensers for prewash and main wash detergent,

liquid bleach, and liquid fabric softener.

CONTROL PANEL LCD DISPLAY SCREEN

Simple electronic controls are user-friendly.

The LCD screen shows cycle options and cycle

information and displays status messages

during operation.

EASY-ACCESS LOCKING DOOR

Extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

HIGH-EFFICIENCY STEAM CYCLES

During LG’s unique high-efficiency STEAM cycles,

the steam nozzle injects fabrics with hot steam to

gently remove tough stains.

ROLLERJETS

The RollerJet system enhances wash

performance while reducing fabric wear.

Integrated jets spray clothes to further improve

washing efficiency.

INTERIOR DRUM LIGHT

The drum light illuminates the washer interior for

greater visibility when loading and unloading.

The ultra long-life LED bulbs should never need

replacement.

DIRECT-DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys

found on most washers to provide improved

performance and reliability while increasing

energy efficiency.

7

PA RT S A N D F E AT U R E S

1

2

4

Hot and Cold

Water Inlets

Drain

Hose

Rear of Washer

KEY PARTS AND COMPONENTS

In addition to the special features and components outlined in

the Special Features section, there are several other important

components that are referenced in this manual.

3

Included Accessories

Hot and Cold

Water Hoses

Wrench

(for removing

shipping bolts and

adjusting leveling feet)

Tie Strap

(for securing

drain hose)

Elbow Bracket

(for securing

drain hose)

Caps (4)

(for covering

shipping bolt holes)

1

ULTRA-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum offers extreme durability

and is tilted to improve efficiency and allow easier access for

large items.

2

WATER CIRCULATION AND STEAM NOZZLES

The water circulation nozzles spray the water/detergent

solution directly onto garments for super cleaning

performance. During LG’s unique high-efficiency STEAM

cycles, the steam nozzle injects fabrics with hot steam to

gently remove tough stains.

3

LEVELING FEET

Four leveling feet (two in the front and two in the back) adjust

to improve washer stability on uneven floors.

4

DRAIN ACCESS PANEL

Provides access to the drain line and drain pump filter.

8

I N S TA L L AT I O N I N S T RU C T I O N S

CHOOSE THE PROPER LOCATION

CLEARANCES

Allow at least 24 in. (61.2 cm) in front of the

washer to open the door.

To ensure sufficient clearance for water lines and

airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm)

behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required

clearances.

• Do not remove ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3-prong outlet. Failure to follow this

warning can cause serious injury, ﬁre, electrical

shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring codes and regulations.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

wWARNING

• Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to

follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• The base opening must not be obstructed by

carpeting when the washer is installed on a

carpeted ﬂoor.

22

1

⁄2”

(57 cm)

29

3

⁄4”

(75.6 cm)

51”

(129.7 cm)

4”

(10 cm)

1”

(2.5 cm)

1”

(2.5 cm)

27”

(68.6 cm)

9

I N S TA L L AT I O N I N S T RU C T I O N S

FLOORING

NOTE: Please note that the floor must be strong

and rigid enough to support the weight of the

washer when fully loaded, without flexing or

bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more

rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front-

loading washer, due to the difference in the spin

speed and direction. If the floor is not solid, your

washer may vibrate and you may hear and feel

the vibration throughout your house.

INSTALLATIONS WITH OPTIONAL PEDESTAL BASE OR STACKING KIT

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed ﬂ oor.

See the NOTE at right.

• Allowable slope under the entire washer is

1° maximum.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal as described below.

IMPORTANT: If you are installing your washer using

an optional pedestal base or stacking kit, please

refer to Optional Accessories in this manual or to the

instructions for your pedestal or stacking kit before

proceeding with the installation.

Required Dimensions for Installation

With Pedestal

Required Dimensions for Installation

With Stacking Kit

29

3

⁄4”

(75.6 cm)

4”

(10 cm)

1”

(2.5 cm)

1”

(2.5 cm)

27”

(68.6 cm)

77

1

⁄2”

(196.8 cm)

10

I N S TA L L AT I O N I N S T RU C T I O N S

When removing the washer from the carton base, be

sure to remove the foam tub support in the middle of the

carton base.

If you must lay the washer down to remove the base

packaging materials, always lay it carefully on its side. Do

NOT lay the washer on its front or back.

IMPORTANT: To prevent internal damage during transport,

the washer is equipped with 4 shipping bolts and plastic

retainers. These bolts and retainers MUST be removed

before operating the washer.

• Failure to remove shipping bolts and retainers may cause

severe vibration and noise, which can lead to permanent

damage to the washer. The cord is secured to the back of

the washer with a shipping bolt to help prevent operation

with shipping bolts in place.

Carton Base

Foam Tub

Support

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

1

Shipping

Bolts

2

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

Retainer

Hole Cap

UNPACKING AND REMOVING SHIPPING BOLTS

11

I N S TA L L AT I O N I N S T RU C T I O N S

CONNECTING THE WATER LINES

Insert a rubber seal into the threaded

ﬁ ttings on each hose.

1

Rubber Seal

Water Hose

(to tap)

Rubber Seal

Water Hose

(to water inlet

on washer)

3

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold

water tap.

Tighten the ﬁ ttings securely. Open the water

taps fully to check for leaks.

Water Tap

NOTE: Do not cross-thread the hose ﬁ ttings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

2

Water

Inlets

• IMPORTANT: Use new hoses when installing

the washer. Do NOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to ﬁ t or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

• Water supply pressure must be between

14.5 PSI and 116 PSI (100~800 kPa). If the

water supply pressure is more than 116 PSI,

a pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored

in a location subject to freezing temperatures.

Damage to the water lines and internal

mechanisms of the washer can result. If the

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

12

I N S TA L L AT I O N I N S T RU C T I O N S

CONNECTING THE DRAIN LINE

Insert the end of the drain hose into the floor

drain. Secure the hose in place to prevent it

from moving.

Drain Hose

Floor Drain

Option 3: Floor Drain

Stand

Pipe

Tie Strap

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 1: Standpipe

Elbow

Bracket

Drain

Hose

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Laundry

Tub

Option 2: Laundry Tub

Elbow

Bracket

Tie

Strap

Drain

Hose

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in ﬂooding and property

damage.

• Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the

washer.

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

13

3

I N S TA L L AT I O N I N S T RU C T I O N S

LEVELING THE WASHER

Loosen the locknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

2

Once the washer is level from side to side

and front to back, tighten all locknuts

securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

NOTE: To make sure that the washer is

properly level, run the washer with a test

load: place approximately 6 pounds of

laundry in the machine. Then press POWER,

press RINSE+SPIN, and then press the

START/PAUSE button. See the following

sections for additional information on cycle

selection and operation.

Verify that the washer does not rock or

vibrate excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable

and retest.

Position the washer in the final location,

taking special care to not pinch, strain, or

crush the water and drain lines. Place a level

across the top of the washer.

1

Level

Leveling

Feet

Leveling

Feet

The drum of your new washer spins at very high

speeds, up to 1,300 RPM. To minimize vibration,

noise, and unwanted movement, the floor must

be a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

• All four leveling feet must rest solidly on the

ﬂ oor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

If you are installing the washer on the optional

pedestal, you must use the leveling feet on

the pedestal to level the washer. The washer’s

leveling feet should be fully retracted and locked

into position with the locknuts.

Raise

Lower

Tighten all 4

locknuts securely

14

SORTING WASH LOADS

H O W TO U S E

Fabric Care Labels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Bleach

symbols

Any bleach

(when needed)

Only non-chlorine bleach

(when needed)

Do not bleach

Machine

wash

cycle

Normal

Permanent press/

wrinkle resistant

Gentle/

delicate

Hand wash

Do not wash Do not wring

Water

temperature

Hot

(50°C/120°F)

Warm

(40°C/105°F)

Cold/cool

(30°C/85°F)

Fabric Care Labels

Sort Laundry...

by Colors by Soil by Fabric by Lint

Whites Heavy Delicates Lint Producer

Lights Normal Easy Care Lint Collector

Darks Light Sturdy

Loading the Washer

• Check all pockets to make sure that they

are empty. Items such as clips, matches,

pens, coins, and keys can damage both your

washer and your clothes.

• Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load

large items ﬁrst.

• Large items should not be more than half of the

total washload.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

• To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

• Do not wash or spin waterproof clothes.

• When unloading the washer, check under the

door seal for small items.

NOTE: The front loading washer rotates the

wet laundry to wash it with less water. If you

do not see the water during washing, it is not

a problem because the laundry is sufficiently

wet.

15

H O W TO U S E

SELECTING DETERGENT

ABOUT THE DISPENSER

The automatic dispenser consists of four

compartments which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments. They

will be dispensed at the appropriate time for the

most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent, bleach, and fabric softener to

the automatic dispenser:

Open the dispenser drawer.

Load the laundry products into the

appropriate compartments.

Slowly close the dispenser drawer to

avoid early dispensing of the laundry

products.

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle.

1

2

3

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efﬁ ciency) detergent

Liquid Chlorine

Bleach

Compartment

Liquid Fabric

Softener

Compartment

Prewash

Detergent

Compartment

Main Wash Detergent

Compartment

Liquid

Detergent

Cup

Insert

IMPORTANT: Your Steam Washer™ is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause oversudsing

and unsatisfactory performance.

16

H O W TO U S E

LOADING THE DISPENSER

Prewash Detergent Compartment

Add liquid or powdered detergent to this

compartment when using the Prewash option.

Always use HE (High-Efficiency) detergent with

your washing machine.

• The amount of detergent added for the Prewash

option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires one measure of detergent, add

1/2 measure for the Prewash option.

NOTE: If liquid detergent is to be used for the

main wash when using the pre-wash option, the

liquid detergent cup accessory must be used

in main wash dispenser to prevent the main

wash liquid detergent from being dispensed

immediately.

Main Wash Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

washing machine.

Never exceed the manufacturer’s

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

• When using liquid detergent, make sure the

liquid detergent cup and insert are in place.

Do not exceed the maximum ﬁll line.

• When using powdered detergent, remove

the insert and liquid detergent cup from the

compartment. Powdered detergent will not

dispense with the liquid detergent cup and

insert in place.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach,

which will be dispensed automatically at the

proper time during the wash cycle.

• Do not add powdered or liquid color-safe bleach

to this compartment.

• Always follow the manufacturer’s

recommendations when adding bleach. Do not

exceed the maximum ﬁll line. Using too much

bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric

damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

• Always follow the manufacturer’s

recommendations when adding fabric softener.

Do not exceed the maximum ﬁll line. Using

too much fabric softener may result in stained

clothes.

• Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum ﬁll line.

• Never pour fabric softener directly onto the load

or into the drum.

Designed specially to use only

HE (High-Efﬁciency) detergent

17

H O W TO U S E

CONTROL PANEL FEATURES

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn

the washer OFF.

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle setting

buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

STEAM BUTTON

Press the STEAM button to add steam to the

selected cycle for added cleaning power.

NOTE: Steam can only be added to the

following cycles: STEAMFRESH™, SANITARY,

BULKY/LARGE, PERM. PRESS, COTTON/

NORMAL, and ALLERGIENE™.

1

2

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. The current

options are shown in the display. Press the

button for that option to view and select

other settings.

DELAY BUTTON

Press this button to delay the start of the wash

cycle. Each press of the button increases the

delay time by one hour, up to 19 hours.

LCD DISPLAY

The display shows the settings, estimated

time remaining, options, and status messages

for your Steam Washer™. The light in the

display will remain on through the cycle.

SPECIAL FUNCTION BUTTONS

The special function buttons allow you to select

additional functions and will light when selected.

Certain buttons also allow you to activate

secondary functions by pressing and holding

the button for 3 seconds.

For detailed information about the individual

functions, please see the following pages.

OPTION BUTTON

Press this button to select additional cycle

options such as WATER PLUS, QUICK CYCLE,

EXTRA RINSE, STAIN CYCLE, and SPINSENSE

™

.

Press the button next to the desired option in the

display to select. The button will light to show

the option has been selected.

5

6

3

4

7

8

9

2

1

3

4

7

9

6

8 8

5

18

H O W TO U S E

CYCLE GUIDE

Cycle

Steam

Fresh

TM

Dress shirts, blouses

Heavily soiled

underwear, work

clothes, diapers, etc.

Extra Hot/Cold

High

Extra High

No Spin

Low

Medium

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Heavy

Light

Normal

Light

Normal

Heavy

Light

Low

Medium

No Spin

Medium

High

No Spin

Low

High

Extra High

No Spin

Low

Medium

No Spin

Low

No Spin

High

Extra High

No Spin

Low

Medium

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Warm/Cold

Cold/Cold

Warm/Warm

Large items such as

blankets and comforters

Dress shirts/pants,

wrinkle-free clothing,

poly/cotton blend

clothing, tablecloths

Cotton, linen, towels,

shirts, sheets, jeans,

mixed loads

Dress shirts/blouses,

nylons, sheer or lacy

garments

Items labeled

“hand-washable”

Cotton, underwear,

pillow covers,

bed sheets, baby wear

Sanitary

Bulky/

Large

Perm. Press

Cotton/

Normal

Delicates

Hand Wash/

Wool

Allergiene

TM

Fabric Type

Wash/Rinse

Temp.

Spin Speed Soil Level

Pre-

Wash

Rinse +

Spin

Water

Plus

Stain

Cycle

Quick

Cycle

Wash/Rinse

Optimizer

TM

Steam

Extra

Rinse

Light

Normal

Heavy

Extra High

No Spin

Low

Medium

High

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Lightly soiled clothing

and small loads

Speed

Wash

The cycle guide below shows the options and recommended fabric types for each cycle.

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level,

or option is available with every cycle.

19

H O W TO U S E

THE LCD DISPLAY

The LCD display shows the settings, estimated

time remaining, options, and status messages

for your washer. When the washer is turned on,

the light in the display will illuminate.

STATUS/CYCLE DISPLAY

This portion of the display shows the selected

cycle, operating status, and special messages.

If a cycle has special instructions, they will also

be displayed in this area.

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the

washer automatically detects the wash load

(weight) and optimizes the washing time, based

on the selected cycle and options. The display

will then indicate the estimated time remaining

for the selected wash cycle.

NOTE: The cycle time displayed may appear

much longer than that of a top-loading washer.

The displayed time is for the complete cycle,

rather than just the agitation portion of the cycle,

as is typically shown on a top-loading washer.

CYCLE COMPLETION INDICATOR

Shows how much of the current wash cycle has

been completed.

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer

door will lock while the washer is operating. The

door can be unlocked by pressing the START/

PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too

high, the door cannot be unlocked until the

washer has cooled. If the water level is too high,

select the DRAIN & SPIN cycle to drain excess

water. Do not try to force open the door.

1

2

QUICK CYCLE

This indicator shows that the washer has been

set for QUICK CYLE.

STAIN CYCLE INDICATOR

This indicator shows that the washer has been

set for the STAIN CYCLE option.

WATER PLUS INDICATOR

This indicator shows that the washer has been

set for the WATER PLUS option.

EXTRA RINSE INDICATOR

This indicator shows that the washer has been

set for the EXTRA RINSE option.

SPINSENSE™ INDICATOR

This indicator shows that the washer has been

set for SPINSENSE™

CYCLE SETTING INDICATORS

These indicators show the current cycle settings

for WASH/RINSE, SPIN SPEED, SOIL LEVEL,

and BEEPER. To change these settings, press the

appropriate settings button.

NOTE: To protect your garments, not every wash/

rinse temperature, spin speed, soil level, or option

is available with every cycle.

5

6

3

4

7

8

CHILD LOCK INDICATOR

When CHILD LOCK is set, the Child Lock

indicator will appear and all buttons are

disabled. This prevents children from changing

settings while the washer is operating.

9

10

11

1

11

2

3

4

5

6 8

7

9 10

20

La pagina sta caricando ...

LG WM3001HRA Manuale del proprietario

LG WM3001HRA Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti