Samsung SC24TA6D Manuale utente

Marca: Samsung

Modello: SC24TA6D

Categoria: Condizionatori d'aria a sistema split

Tipo: Manuale utente

E§§HNIKA

RUSSIAN

ENGLISH

Split-type Room Air Conditioner (Cool and Heat)

Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)

Condizionatore d’aria per ambienti ad unità Separate (Raffreddamento e Riscaldamento)

Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento)

Climatiseur de type Séparé (Refroidissement et Chauffage)

Geteilte raumklimaanlage (Kühlen und Wärmen)

¢IAIPOYMENO K§IMATI™TIKO ¢øMATIOY (æ‡ÍË˜ Î·È £¤ÚÌ·ÓÛË˜)

äéåçÄíçõâ äéçÑàñàéçÖê ëàëíÖåõ ëèãàí (éıÎ‡Ê‰ÂÌËÂ Ë Ó·Ó„Â‚)

AQ24A5(6)RB(C)(D)(E)D

AQT24A5(6)RE(B)D

SH24TA5(6)(8)D

SH24AC5(6)

AQ18A9(0)RB(C)(D)(E)D

SH18ZA9(0)D

SH18AC9(0)

AQ12AA(B)MB(D)(E)

AQV12AC(D)ME

SH12VAC(D)

SH12ZAA(B)

SH12ACA(B)

AQ09A5(6)MB(D)(E)D

AQV09AC(D)ME

SH09VAC(D)

SH09VCD

SH09ZA5(6)D

SH09ACA(B)

AQ07A5(6)MB(E)D

SH07ZA5(6)D

SH07AC5(6)

Indoor unit

AQ24B5(6)RB(C)(D)(E)D

AQT24B5(6)RE(B)D

SH24TB5(6)(8)D

AQ18B9(0)RB(C)(D)(E)D

SH18ZB9(0)D

AQ12BA(B)MB(D)(E)

AQV12BC(D)ME

SH12VBC(D)

SH12VCD

SH12ZBA(B)

AQ09B5(6)MB(D)(E)D

AQV09BC(D)ME

SH09VBC(D)

SH09ZB5(6)D

AQ07B5(6)MB(E)D

SH07ZB5(6)D

AQ24C5(6)RB(C)(D)(E)D

AQT24C5(6)RB(E)D

AQ18C9(0)RB(C)(D)(E)D

AQ12CA(B)MB(D)(E)

AQ09C5(6)MB(D)(E)D

AQ07C5(6)MB(E)D

Indoor unit

ESPAÑOL

ITALIANO

PORTUGUÉS

FRANÇAIS

DEUTSCH

OWNER’S INSTRUCTIONS

MANUAL DE INSTRUCCIONES

ISTRUZIONI PER L’USO

MANUAL DE INSTRUÇÕES

MANUEL D’UTILISATION

GEBRAUCHSANWEISUNG

O¢H°IE™

àçëíêìäñàü Ñãü èéãúáéÇÄíÖãü

ES I PFDGRDB98-03778A(4)

E-2

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials

over it.

2 NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your

air conditioner and contact your installation specialist.

3 Do NOT insert anything between the air flow blades, as the inner fan may become damaged and you may be

hurt. Keep children away from the indoor unit.

4 Do NOT place any obstacles in front of the outdoor unit.

5 If the remote control will not be used for a long time, remove the batteries.

6 Users of this product are cautioned not to attempt repair of this product at their own discretion.

Instead, they are requested to directly contact a designated service center or the outlet at which the

product was purchased.

7 If the supply cord is damaged, it must be replaced by a special cord or assembly available from the

manufacturer or its service centre.

8 This device must be installed according to the national electrical rules.

9 Before disposing of the remote control it is necessary to remove batteries.

10 The appliance is not intended for use by young children or infirm person without supervision;

young children should be supervised to ensure that they do not play with the appliance.

11 Max current is measured according to IEC standard for safety

and current is measured according to ISO standard for energy efficiency.

The manufacturer does not take any responsibility for any accidents that

occur because the air conditioner is not fixed firmly or installed securely,

during installing or using the product. In case you experience difficulty in

installation, you must use an installation specialist. An accident will occur

if the installation is not done as recommends in the installation guide.

E-3

ENGLISH

Contents

◆

REPARING YOUR AIR CONDITIONER

■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■ Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . 6

■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . 8

◆

PERATING YOUR AIR CONDITIONER

■ 5 Way Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . . 10

■ Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 13

■ Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■ Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 16

■ Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 17

◆

ROGRAMMING YOUR AIR CONDITIONER

■ Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

■ Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

◆

ECOMMENDATIONS FOR USE

■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 22

■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Installing a Filter (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

◆

ECHNICAL SPECIFICATIONS

E-4

View of the Unit

The design and shape are subject to change according to the model.

Indoor Unit

Air filter

(under the grille)

Air flow blades (outlet)

Air inlet

Timer indicator

STANDARD indicator

NATURE indicator

Inverter Power Monitor indicator

(Only the Inverter models)

POWER indicator

SILENCE indicator

Remote control sensor

SAVING indicator

On/Off & 5 Way

selection button

◆ For details on the 5 Way, refer to page 9.

◆ Inverter Power Monitor indicator(Only the inverter models) :

Following the condition of it's operation, Power Monitor indicator

would be allowed to increase or decrease.

- The first state of it's operation, the maximum

permissible dose of it's operation.

- The state of appropriate room

temperature.

E-5

ENGLISH

Air Inlet(Rear)

Air Outlet

Connection

Valve

(Inside)

Air Inlet(Rear)

Air Outlet

Connection

Valve

SH✴✴VCD / SH✴✴AC✴✴ / AQ(T)✴✴C✴R(M)✴✴

Indoor Unit

The design and shape are subject to change according to the model.

Outdoor Unit

◆ For details on the 5 Way, refer to page 9.

◆ Inverter Power Monitor indicator(Only the inverter models) :

Following the condition of it's operation, Power Monitor indicator

would be allowed to increase or decrease.

- The first state of it's operation, the maximum

permissible dose of it's operation.

- The state of appropriate room

temperature.

Air filter

(under the grille)

Air flow blades (outlet)

Air Inlet

STANDARD indicator

NATURE indicator

POWER indicator

SILENCE indicator

TIMER indicator

SAVING indicator

On/Off & 5 Way

selection button/

Remote Control Sensor/

Inverter Power Monitor indicator

(Only the Inverter models)

E-6

Remote Control - Buttons and Display

Operating mode

( AUTO, COOL, DRY,

FAN, HEAT)

Remote control

transmission indicator

Mode selection button

(AUTO, COOL, DRY, FAN, HEAT)

Turbo/Sleep mode

selection button

Swing button

On Timer button

Off Timer button

On/Off &

Timer Set/Cancel button

Fan speed adjustment

button

Temperature adjustment

buttons

Temperature setting

Sleep mode

Turbo mode

Fan speed

Air flow direction

On Timer setting

Off Timer setting

Battery discharge indicator

5 Way selection button

E-7

ENGLISH

etting Started

You have just purchased a split type air conditioner and it has been

installed by your installation specialist.

Your Owner’s Instructions contains valuable information on using your

air conditioner. Please take the time to read it as it will help you take full

advantage of the unit’s features.

The booklet is organized as follows.

◆ The following figures are shown on pages from 4 to 6 :

- Indoor and outdoor units

- Remote control(buttons and display)

They will help you find the buttons and understand the symbols displayed.

◆ In the main part of the installation book, you will find a series of

step-by-step procedures for each function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS PUSH HOLD DOWN

E-8

Inserting the Remote Control Batteries

Push the battery cover on the rear of the remote control with your thumb

in the direction of the arrow and remove it.

Insert the two batteries, taking care to respect the polarities :

◆ + on the battery with + on the remote control.

◆ - on the battery with - on the remote control.

Close the cover by sliding it back until it clicks into place.

◆ Use two AAA, LR03 1.5V batteries.

◆ Do not use old batteries or different kinds of batteries together.

◆ Batteries may be completely discharged after 12 months, even

◆ if they have not actually been used.

You must insert or replace the remote control batteries when :

◆ You purchase the air conditioner

◆ The remote control does not work correctly

E-9

ENGLISH

5 Way Function

Press the (ON/OFF) button one time and then select the desired

mode.

To stop the operating, press the (ON/OFF) button until all indicators turn off.

You can select the 5 Way function with operating mode of the air conditioner for

more comfortable circumstances. You can use the 5 Way function with the indoor

unit as well as the remote control. Thus, you can use this function

even though you have lost your remote control.

Using with the indoor unit

To select the 5 Way function with the remote control, press the 5 Way

button one or more times until the desired mode is selected.

◆ Each time you press the 5 Way button:

Each 5 Way indicator on the indoor unit lights up in order.

Selecting with the Remote Control

Even if the air conditioner has been turned on via the ON/OFF

button on the unit, operations can still be controlled using the

remote control as usual.

To obtain a(n)...

Normal operating

(STANDARD) mode

Then select...

(NATURE) mode

Reducing the uncomfortable

temperature gradually

(POWER) mode

High fan speed

(SAVING) mode

Compressor run time reduced

(SILENCE) mode

Fan speed reduces as the temperature

decreases

To obtain a(n)...

Normal operating

(STANDARD) mode

Then select...

(NATURE) mode

Reducing the uncomfortable

temperature gradually

(POWER) mode

High fan speed

(SAVING) mode

Compressor run time reduced

(SILENCE) mode

Fan speed reduces as the temperature

decreases

SH✴✴VCD / SH✴✴AC✴✴ / AQ(T)✴✴C✴R(M)✴✴

E-10

Selecting the Automatic Operating Mode

You can start the air conditioner in Automatic mode from your remote

control. In the Automatic mode, the standard temperature and the

optimum fan speed is selected automatically. You can adjust the

standard temperature but not the fan speed.

If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it

appears.

Result

: ◆ The indoor unit beeps each time you press the MODE button.

◆ The air conditioner runs in AUTO mode.

You can change modes at any time.

If necessary, press the (On/Off) button.

Result: ◆ The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

Auto Change Over Function (Only the Inverter Models)

◆

In the Automatic mode, the air conditioner selects one of

COOL, HEAT, DRY depending on the indoor and outdoor

temperatures. If the air conditioner has not been operated

for an hour, the air conditioner will take the current

temperatures again and it will restart operating in

the optimum mode.

To adjust the standard temperature (The air conditioner automatically

set the standard temperature by the current room temperature.),

press the TEMPERATURE buttons one or more times.

SET TEMP. SET TEMP. - SET TEMP. SET TEMP.

-2°C -1°C Standard temperature +1°C +2°C

< When you feel hot > < When you feel chilly >

E-11

ENGLISH

Cooling Your Room

If necessary, press the (On/Off) button.

Result:

◆

The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it

appears.

Result:

◆

The indoor unit beeps each time you press the MODE button.

◆

The air conditioner runs in COOL mode.

You can change modes at any time.

To adjust the temperature, press the TEMPERATURE buttons one or

more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆

Each time you press the TEMPERATURE buttons:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts cooling, provided that the room

temperature is higher than the selected temperature.

◆ If the room temperature reaches the set temperature, the

air conditioner stops cooling, but the fan is still operating.

Select the fan speed by pressing the FAN button one or more times

until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result

: Each time you press the FAN button, the indoor unit beeps.

To control the direction of the air flow, refer to page 16 and 17.

You must select the Cool mode if you wish to adjust the:

◆ Cooling temperature

◆ Fan speed when cooling

E-12

Heating Your Room

You must select the Heat mode if you wish to adjust the:

◆ Heating temperature

◆ Fan speed when heating

1 If necessary, press the (On/Off) button.

Result: ◆

The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism

to prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

It will start up normally after three minutes.

2 If the is not displayed at the top of the remote control, press the

MODE button on the remote control one or more times until it appears.

Result

: ◆

The indoor unit beeps each time you press the MODE button.

◆

The air conditioner runs in HEAT mode.

ee You can change modes at any time.

3 To adjust the temperature, press the TEMPERATURE buttons one or

more times until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result

: ◆ Each time you press the TEMPERATURE buttons:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts heating, provided that the room

temperature is lower than the desired temperature

(selected temperature+3°C).

◆ If the room temperature reaches the set temperature,

the air conditioner stops heating, but the fan is still operating.

4 Select the fan speed by pressing the FAN button one or more times

until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result

: ◆

Each time you press the FAN button, the indoor unit beeps.

◆

For the first three to five minutes, the fan operates very

slowly until the air has been sufficiently warmed. Once the

correct temperature has been reached, the fan is automatically

set to the required speed.

5 To control the direction of the air flow, refer to page 16 and 17.

IMPORTANT

E-13

ENGLISH

Changing the Room Temperature Quickly

The Turbo cooling/heating function is used to cool or heat your room as

quickly as possible.

: You have just come home and find that the room is very

hot. You wish to cool it down as quickly as possible.

The Turbo function operates for 30 minutes with the maximum settings before

returning automatically to the mode and temperature previously selected.

If necessary, press the (On/Off) button.

Result

: ◆ The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when the unit

was last used.

◆ The indoor unit beeps.

Press the button.

Result: ◆ The temperature and fan settings are adjusted automatically.

◆ The air conditioner cools or heats the room as quickly as possible.

◆ After 30 minutes, the air conditioner is reset automatically to the

previous mode, temperature and fan settings.

But, if you press the button in DRY or FAN mode,

it will change to AUTO mode automatically.

If you wish to stop the Turbo function before the end of the 30-minute period,

press the button one or more times until or disappears.

Result

: The air conditioner is reset automatically to the previous mode,

temperature and fan settings.

To control the direction of the air flow, refer to page

16 and 17.

E-14

Removing Excess Humidity

If the atmosphere in your room is very humid or damp, you can

remove excess humidity without lowering the room temperature too

much.

1 If necessary, press the (On/Off) button.

Result

: ◆

The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism

to prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

It will start up normally after three minutes.

2 If the is not displayed at the top of the remote control, press the

MODE button on the remote control one or more times until it appears.

Result

: ◆

The indoor unit beeps each time you press the MODE button.

◆

The air conditioner runs in DRY mode.

ee You can change modes at any time.

3 To adjust the temperature, press the TEMPERATURE buttons one or

more times until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result

: ◆ Each time you press the TEMPERATURE buttons:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts removing the excess humidity;

the quantity of air is adjusted automatically.

4 To control the direction of the air flow, refer to page 16 and 17.

IMPORTANT

E-15

ENGLISH

Airing Your Room

If the atmosphere in your room is stale, you can air the room using

the Fan feature.

1 If necessary, press the (On/Off) button.

Result

: ◆

The 5 Way indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

2 If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it

appears.

Result

: ◆

The indoor unit beeps each time you press the MODE button.

◆

The air conditioner runs in FAN mode.

◆

The temperature is set automatically.

ee You can change modes at any time.

3 Select the fan speed by pressing the FAN button one or more times

until the required setting is displayed:

Low

Medium

High

Result

: Each time you press the FAN button, the indoor unit beeps.

4 To control the direction of the air flow, refer to page 16 and 17.

E-16

Adjusting the Air Flow Direction Vertically

Depending on the position of the indoor unit on the wall of your

room, you can adjust the position of the outer air flow blade on the

bottom of the unit, thus increasing the efficiency of the air

conditioner.

1 Press the SWING button one or more times as required.

Result

: The outer blade is adjusted vertically.

RECOMMENDATION When... Adjust the blade to face...

Cooling Upwards.

Heating Downwards.

2 If you want the blade to move up and down automatically when the air

conditioner is operating, press the SWING button.

Result

: The blade move up and down, around the base position set.

To stop the blade moving up and down, press the SWING button again.

If you switch the air conditioner... Then the blade is...

Off Closed completely.

On again Set to the initial position powered.

E-17

ENGLISH

Adjusting the Air Flow Direction Horizontally

There are two sets of inner air flow blades. Just as the outer air flow

blade can be adjusted vertically, the inner blades can be adjusted

horizontally.

1 Adjust each set of inner blades to the required position, by pushing or

pulling them sideways.

❄ The design and shape are subject to

change according to the model.

E-18

Setting the On Timer

If you want to turn on the air conditioner before the timer reaches

the setting time, press the (ON/OFF) button.

The On Timer enables you to switch on the air conditioner automatically

after a given period of time. You can set the period of time from

30 minutes to 24 hours.

To set the operating time, press the ON TIMER button one or more times

until the required time is displayed. Possible time is between 0.5 hour and

24 hour inclusive.

Press the (Set/Cancel) button to complete the setting.

Result:

◆ The remaining time is displayed.

◆ Blinking of the timer indicator stops.

◆ The selected mode and the temperature on the display

disappear after 10 seconds.

◆ The air conditioner will switch on automatically when the

counter displayed on the remote control reaches the set time

and disappears the On timer setting.

To cancel the On Timer, press the ON TIMER button one or more times

until the timer setting disappears.

Press the (Set/Cancel) button.

To Cancel the On Timer

To select an operating mode in advance, press the button until the

desired mode is displayed at the top of the remote control.

Result:

◆ The air conditioner will run in the selected mode when it is

turned on.

E-19

ENGLISH

Setting the Off Timer

The Off Timer enables you to switch off the air conditioner automatically

after a given period of time. You can set the period of time from

30 minutes to 24 hours.

To set the operating time, press the OFF TIMER button one or more times

until the required time is displayed. Possible time is between 0.5 hour and 24

hour inclusive.

You can see or change the setting mode and/or the temperature

by pressing the MODE button or the TEMPERATURE buttons

after setting the Off timer.

Press the (Set/Cancel) button to complete the setting.

Result:

◆ The remaining time is displayed.

◆ Blinking of the timer indicator stops.

◆ The air conditioner will switch off automatically when the

counter displayed on the remote control reaches the set time

and disappears the Off timer setting.

If you would like to turn the air conditioner on after 2 hours

and to operate it for 2 hours:

1. Press the ON TIMER button until ‘2.0 Hr’ is displayed.

2. Press the (Set/Cancel) button.

3. Press the OFF TIMER button until ‘4.0 Hr’ is displayed.

4. Press the (Set/Cancel) button.

If you want to turn off the air conditioner before the timer reaches

the setting time, press the (ON/OFF) button.

To cancel the Off Timer, press the OFF TIMER button one or more times

until the timer setting disappears.

Press the (Set/Cancel) button.

To Cancel the Off Timer

E-20

Setting the Sleep Timer

The Sleep Timer can be used when you are cooling or heating your

room to switch the air conditioner off automatically after a period of

six hours.

ee If you wish to switch the unit off at a specific time, refer to

page 19.

1 Make sure that you have selected either COOL or HEAT mode.

2 Press the button one or more times until appears on the

remote control.

Result

: ◆ The indoor unit beeps.

◆ The air conditioner will be controlled as indicated in the

illustrations below.

Cooling The desired temperature is

increased by 1°C every hour.

When it has been increased

by 2°C (after two hours), the

temperature is maintained for

four hours.

Heating The desired temperature is

decreased by 1°C every hour.

When it has been decreased

by 2°C (after two hours), the

temperature is maintained for

four hours.

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you

can cancel it at any time.

Press the button.

Result

: ◆ The indoor unit beeps.

◆ The is no longer displayed.

◆ The air conditioner operates normally.

La pagina si sta caricando...

Samsung SC24TA6D Manuale utente

Marca: Samsung

Modello: SC24TA6D

Categoria: Condizionatori d'aria a sistema split

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: Samsung SC24TA6D User manual

Samsung SC24TA6D Manuale utente

Samsung SC24TA6D Manuale utente

in altre lingue

Documenti correlati