VIPA Panel PC PPC010 EC Manuale del proprietario

PPC | 67K-RRJ0 | Manual

HB160 | PPC | 67K-RRJ0 | en | 23-10

HMI

Panel PC - PPC010 EC

YASKAWA Europe GmbH

Philipp-Reis-Str. 6

65795 Hattersheim

Germany

Tel.: +49 6196 569-300

Fax: +49 6196 569-398

Email: [email protected]

Internet: www.yaskawa.eu.com

Table of contents

1 General.................................................................................................................... 5

1.2 About this manual............................................................................................. 6

1.3 Safety information............................................................................................. 6

2 Hardware description............................................................................................. 8

2.1 Safety information for users.............................................................................. 8

2.2 Properties......................................................................................................... 9

2.3 Structure......................................................................................................... 10

2.3.1 Overview...................................................................................................... 10

2.3.2 Interfaces..................................................................................................... 12

2.3.3 Memory management.................................................................................. 16

2.4 Dimensions..................................................................................................... 17

2.5 General data................................................................................................... 18

2.6 Use in difficult operating conditions................................................................ 19

2.7 Technical data................................................................................................. 20

3 Deployment Panel PC.......................................................................................... 23

3.1 Installation...................................................................................................... 23

3.2 Installation of the CFast card.......................................................................... 24

3.3 Commissioning............................................................................................... 25

3.3.1 Firmware update.......................................................................................... 25

3.3.2 Startup-Manager.......................................................................................... 26

3.4 Connection to a PLC system.......................................................................... 29

3.5 Operating system Windows Embedded Compact 7....................................... 30

3.5.1 General........................................................................................................ 30

3.5.2 Structure...................................................................................................... 31

3.6 Integrated server............................................................................................ 33

3.6.1 General........................................................................................................ 33

3.6.2 ftp server...................................................................................................... 34

3.6.3 Telnet server................................................................................................ 35

3.6.4 VNC server.................................................................................................. 36

3.7 Access to the network resources.................................................................... 38

4 BIOS setup............................................................................................................ 39

4.1 Overview......................................................................................................... 39

4.2 Main................................................................................................................ 40

4.3 Advanced........................................................................................................ 41

4.4 Chipset........................................................................................................... 51

4.5 Security........................................................................................................... 55

4.6 Boot................................................................................................................ 57

4.7 Save and Exit................................................................................................. 58

5 Industrial Security and Installation guidelines.................................................. 60

5.1 Industrial security in information technology................................................... 60

5.1.1 Protection of hardware and applications..................................................... 61

5.1.2 Protection of PC-based software................................................................. 62

5.2 Installation guidelines..................................................................................... 62

5.2.1 Basic rules for the EMC-equitable assembly of installations....................... 62

5.2.2 EMC-equitable assembly............................................................................. 66

5.2.3 EMC-equitable cabling................................................................................ 67

HMI Table of contents

HB160 | PPC | 67K-RRJ0 | en | 23-10 3

5.2.4 Special precautions providing high noise immunity..................................... 70

5.2.5 Checklist for the EMC-compliant installation of controllers.......................... 71

Appendix............................................................................................................... 72

A History of changes............................................................................................ 74

HMI

Table of contents

HB160 | PPC | 67K-RRJ0 | en | 23-10 4

1 General

This document contains proprietary information of Yaskawa and is not to be disclosed or

used except in accordance with applicable agreements.

This material is protected by copyright laws. It may not be reproduced, distributed, or

altered in any fashion by any entity (either internal or external to Yaskawa) except in

accordance with applicable agreements, contracts or licensing, without the express

written consent of Yaskawa and the business management owner of the material.

For permission to reproduce or distribute, please contact: YASKAWA Europe GmbH,

European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany

Tel.: +49 6196 569 300

Fax.: +49 6196 569 398

Email: [email protected]

Internet: www.yaskawa.eu.com

Hereby, YASKAWA Europe GmbH declares that the products and systems are in compli-

ance with the essential requirements and other relevant provisions. Conformity is indi-

cated by the CE marking affixed to the product.

For more information regarding CE marking and Declaration of Conformity (DoC), please

contact your local representative of YASKAWA Europe GmbH.

All Microsoft Windows, Office and Server products mentioned are registered trademarks

of Microsoft Inc., USA.

All other trademarks, logos and service or product marks specified herein are owned by

their respective companies.

Every effort has been made to ensure that the information contained in this document

was complete and accurate at the time of publishing. We cannot guarantee that the infor-

mation is free of errors, and we reserve the right to change the information at any time.

There is no obligation to inform the customer about any changes. The customer is

requested to actively keep his documents up to date. The customer is always responsible

for the deployment of the products with the associated documentation, taking into

account the applicable directives and standards.

This documentation describes all hardware and software units and functions known

today. It is possible that units are described that do not exist at the customer. The exact

scope of delivery is described in the respective purchase contract.

Contact your local representative of YASKAWA Europe GmbH if you have errors or ques-

tions regarding the content of this document. You can reach YASKAWA Europe GmbH via

the following contact:

Email: [email protected]

Contact your local representative of YASKAWA Europe GmbH if you encounter problems

or have questions regarding the product. If such a location is not available, you can reach

the Yaskawa customer service via the following contact:

YASKAWA Europe GmbH,

European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany

Tel.: +49 6196 569 500 (hotline)

Email: [email protected]

EC conformity declaration

Conformity Information

Trademarks

General terms of use

Document support

Technical support

HMI General

HB160 | PPC | 67K-RRJ0 | en | 23-10 5

1.2 About this manual

This manual describes the Panel PC 67K-RRJ0-....

nIt describes the structure, configuration and application.

nThe manual is written for users with basic knowledge of automation technology.

nThe manual consists of chapters. Each chapter describes a completed topic.

nThe following guides are available in the manual:

– An overall table of contents at the beginning of the manual.

– References with pages numbers.

Validity of the documentation

Product Order number as of version:

PPC010 EC 67K-RRJ0-... HW: 01 FW: V1.0.0 WindowsÒ

Embedded Compact

7

Important passages in the text are highlighted by following icons and headings:

DANGER!

Immediate or likely danger. Personal injury is possible.

CAUTION!

Damages to property is likely if these warnings are not heeded.

Supplementary information and useful tips.

1.3 Safety information

The system is constructed and produced for:

ncommunication and process control

ngeneral control and automation tasks

nindustrial applications

noperation within the environmental conditions specified in the technical data

ninstallation into a cubicle

DANGER!

This device is not certified for applications in

–in explosive environments (EX-zone)

Objective and contents

Icons Headings

Applications conforming

with specifications

HMI

General

Safety information

HB160 | PPC | 67K-RRJ0 | en | 23-10 6

The manual must be available to all personnel in the

nproject design department

ninstallation department

ncommissioning

noperation

CAUTION!

The following conditions must be met before using or commis-

sioning the components described in this manual:

– Hardware modifications to the process control system should only be

carried out when the system has been disconnected from power!

–Installation and hardware modifications only by properly trained per-

sonnel.

– The national rules and regulations of the respective country must be

satisfied (installation, safety, EMC ...)

National rules and regulations apply to the disposal of the unit!

Documentation

Disposal

HMI General

Safety information

HB160 | PPC | 67K-RRJ0 | en | 23-10 7

2 Hardware description

2.1 Safety information for users

The modules make use of highly integrated components in MOS-Technology. These com-

ponents are extremely sensitive to over-voltages that can occur during electrostatic dis-

charges. The following symbol is attached to modules that can be destroyed by electro-

static discharges.

The Symbol is located on the module, the module rack or on packing material and it indi-

cates the presence of electrostatic sensitive equipment. It is possible that electrostatic

sensitive equipment is destroyed by energies and voltages that are far less than the

human threshold of perception. These voltages can occur where persons do not dis-

charge themselves before handling electrostatic sensitive modules and they can damage

components thereby, causing the module to become inoperable or unusable. Modules

that have been damaged by electrostatic discharges can fail after a temperature change,

mechanical shock or changes in the electrical load. Only the consequent implementation

of protection devices and meticulous attention to the applicable rules and regulations for

handling the respective equipment can prevent failures of electrostatic sensitive modules.

Modules must be shipped in the original packing material.

When you are conducting measurements on electrostatic sensitive modules you should

take the following precautions:

nFloating instruments must be discharged before use.

nInstruments must be grounded.

Modifying electrostatic sensitive modules you should only use soldering irons with

grounded tips.

CAUTION!

Personnel and instruments should be grounded when working on electro-

static sensitive modules.

Handling of electrostatic

sensitive modules

Shipping of modules

Measurements and altera-

tions on electrostatic sen-

sitive modules

HMI

Hardware description

Safety information for users

HB160 | PPC | 67K-RRJ0 | en | 23-10 8

2.2 Properties

The Panel PC is a combination of industrial PC with state of the art performance features

and a touch panel with ideal display capabilities. The Panel PC is a compact and modular

embedded PC based on WindowsÒ Embedded Compact 7 - WEC7. Besides the exten-

sive WEC7 functions the Panel PC offers varied communication possibilities.

nWindowsÒ Embedded Compact 7

nMovicon 11 CE Standard

n10.1" 16:10 TFT Panel 262K

nPCAP, multitouch

nDisplay resolution 1280 x 800

nProcessor: Baytrail IntelÒ Celeron J1900, Quad core 2GHz

nWork memory: 2x 204Pin DDR3 SO-DIMM Socket, 2GB DDR3

nUser memory: 2GB SATA DOM

nCFast slot

n2 RS232/RS422/RS485 (switchable by BIOS), 3 USB-A, 2 Ethernet interfaces, VGA

port and Audio out, connector for remote Power switch

nMetal case

nPassive cooling

nEasy mounting via integrated pivoted lever

nProtection class IP66 (frontal)

Order data

Type Order number Description

PPC010 EC 67K-RRJ0-... 10.1'' TFT color, 2x RS232/RS422/RS485, 3x USB-A, 2x Ethernet

RJ45, VGA, Audio out

General

HMI Hardware description

Properties

HB160 | PPC | 67K-RRJ0 | en | 23-10 9

2.3 Structure

2.3.1 Overview

1 Slot for voltage supply (DC 12-30V)

2 VGA interface

3 Reset button

4 RS232/RS422/RS485 interface COM 2

5 RS232/RS422/RS485 interface COM 1

6 USB-A interface USB 3.0

7 2x USB-A interface USB 2.0

8 RJ45 jack for Ethernet communication LAN 2

9 RJ45 jack for Ethernet communication LAN 1

10 2 pin connector for remote Power switch

11 3.5mm Audio Line out

12 Power switch (pushbutton)

13 Slot for CFast storage media

14 Display with touch sensitive area (touch screen)

Front view

HMI

Hardware description

Structure > Overview

HB160 | PPC | 67K-RRJ0 | en | 23-10 10

1 Slot for voltage supply (DC 12-30V)

2 VGA interface

3 Reset button

4 RS232/RS422/RS485 interface COM 2

5 RS232/RS422/RS485 interface COM 1

6 USB-A interface USB 3.0

7 2x USB-A interface USB 2.0

8 RJ45 jack for Ethernet communication LAN 2

9 RJ45 jack for Ethernet communication LAN 1

10 2 pin connector for remote Power switch

11 3.5mm Audio Line out

Please make sure that the Panel PC always has to be supplied with

external voltage!

1 Slot for CFast storage media

2 Power switch (pushbutton)

The Panel PC starts automatically when the power supply is switched on.

It may be switched off by the power switch.

But you can change the configuration in the BIOS setup so that the Panel

PC has to be switched on by the power switch.

Ä

‘Restore AC Power

Loss’ page 52

Bottom view

Top view

HMI Hardware description

Structure > Overview

HB160 | PPC | 67K-RRJ0 | en | 23-10 11

2.3.2 Interfaces

The Panel PC has got an integrated power supply. The power supply has to be provided

with DC 12... 30V. For this you find an according DC 24V slot at the back. The power

supply is protected against inverse polarity and overcurrent. The matching 3-pin plug con-

nector is included in the scope of delivery.

VGA SubD HD15 jack to connect a second display.

Power supply

VGA interface

HMI

Hardware description

Structure > Interfaces

HB160 | PPC | 67K-RRJ0 | en | 23-10 12

The 9-pin male SubD connector may be switched with BIOS. Here also the termination

resistor of the RS422 and RS485 interface may be activated or deactivated.

Ä

‘Submenu

"Serial Port 2 Configuration"’ page 45

RS232 interface

nLogical conditions as voltage level

nPoint-to-point connection with serial full-duplex transfer

nData transfer up to a distance of 15m

nData transfer rate up to 115.2kbit/s

RS422 interface

nLogical conditions as voltage difference between 2 twisted lines

nSerial bus connection full-duplex four-wire operation

nLine length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s

nData transfer rate up to 115.2kbit/s

RS485 interface

nLogical conditions as voltage difference between 2 twisted lines

nSerial bus connection half-duplex two-wire operation

nLine length: 250m at 115.2kbit/s ... 1200m at 19.2kbit/s

nData transfer rate up to 115.2kbit/s

RS232/RS422/RS485 inter-

face (switchable)

HMI Hardware description

Structure > Interfaces

HB160 | PPC | 67K-RRJ0 | en | 23-10 13

HMI

Hardware description

Structure > Interfaces

HB160 | PPC | 67K-RRJ0 | en | 23-10 14

The Panel PC has a USB 3.0 and two USB 2.0 interfaces. The fast USB 3.0 interface can

be recognized by the blue connector. USB 2.0 works half-duplex, the data can only be

transmitted in one direction. USB 3.0 works full-duplex, meaning that data can be trans-

ferred simultaneously in both directions. Using the "Host"-USB-A interfaces USB mouse,

keyboard, stick or USB hard discs can be connected.

The two RJ45 jacks provide the interface to the twisted pair cable, required for Ethernet.

LEDs

Activity

yellow

Link

green

Link

orange

Description

blinks 1000Mbit/s link

blinks 100Mbit/s link

blinks 10Mbit/s link or no link

not active

At this connection, you can connect an additional pushbutton as a remote Power switch

to switch the PPC on or off from any location. The matching 2-pin plug connector is

included in the scope of delivery.

Ä

further information page 11

3.5 mm stereo jack to connect an active speaker system or an earphone.

"Host"-USB-A

Ethernet connection

Remote Power switch

connection (SW)

Line out

HMI Hardware description

Structure > Interfaces

HB160 | PPC | 67K-RRJ0 | en | 23-10 15

2.3.3 Memory management

n2GB work memory

n2GB SATA DOM user memory

nUSB storage media using "Host"-USB-A interface

nSlot for CFast memory card

The Panel PC has a work memory with a size of 2GB. The work memory is not buffered

and is deleted after shut down.

As internal permanent storage medium the Panel PC has a 2GB flash module

(1600Mbyte for user data). After the start of WindowsÒ this memory is listed as Flashdisk

under My Device.

The Panel PC has got three USB-A interfaces (1x USB 3.0 and 2x USB 2.0). The con-

nection of USB sticks and USB drives are supported by the Panel PC.

At the back of the Panel PC there is a card slot for a memory card. At this slot you can

plug storage modules of the type CFast 2.0 - 600 MB/s (6GBit/s) - SATA protocol - not

hot-swap compatible.

Pin Assignment Pin Assignment

S1 GND PC6 n.c.

S2 SATA_TX1+ PC7 GND

S3 SATA_TX1- PC8 CFAST_LED1_C

S4 GND PC9 CFAST_LED2_C

S5 SATA_RX1+ PC10 n.c.

S6 SATA_RX1- PC11 n.c.

S7 GND PC12 n.c.

PC1 CFAST_CDI PC13 VCC3

PC2 GND PC14 VCC3

PC3 n.c. PC15 GND

PC4 n.c. PC16 GND

PC5 n.c. PC17 CFAST_CDO

Prior to removing the CFast card, make sure the unit's power is off and

disconnected from the power supply.

Overview

Work memory

User memory

USB storage media

Slot for CFast

HMI

Hardware description

Structure > Memory management

HB160 | PPC | 67K-RRJ0 | en | 23-10 16

2.4 Dimensions

For the installation of the Panel PC in control cabinets and desks the following dimen-

sions are necessary:

Front panel thickness 3 ... 12mm

Installation cutting (W x H) 297 x 212mm

Front panel (W x H x T) 308 x 223 x 6.70mm

Rear panel (W x H x D) 292 x 207 x 54.20mm

Installation depth 54.20mm

The degrees of protection are only guaranteed when the following is

observed:

–The material thickness of the installation cut-out is 3 ... 12mm

–The deviation from the plane for the panel cut-out is

£

0.5mm

–Permissible surface roughness in the area of the seal:

£

120µm (fric-

tion coefficient 120)

Installation dimensions

10.1" - 67K-RRJ0-...

HMI Hardware description

Dimensions

HB160 | PPC | 67K-RRJ0 | en | 23-10 17

2.5 General data

Conformity and approval

Conformity

CE 2014/30/EU EMC directive

Approval

UL Refer to Technical Data

others

RoHS 2011/65/EU Restriction of the use of certain hazardous substances in

electrical and electronic equipment

Protection of persons and device protection

Type of protection - IP20

Electrical isolation

to the field bus - electrically isolated

to the process level - electrically isolated

Insulation resistance -

Insulation voltage to reference earth

Inputs / outputs - AC / DC 50V, test voltage AC 500V

Protective measures - against short circuit

Environmental conditions to EN 61131-2

Climatic

Storage / transport EN 60068-2-14 -20…+75°C

Operation

Horizontal installation EN 61131-2 -10…+60°C

Vertical installation EN 61131-2 -10…+60°C

Air humidity EN 60068-2-30 RH1 (without condensation, rel. humidity 10…95%)

Pollution EN 61131-2 Degree of pollution 2

Mechanical

Oscillation EN 60068-2-6 1g, 9Hz ... 150Hz

Shock EN 60068-2-27 15g, 11ms

Mounting conditions

Mounting place - In the control cabinet

Mounting position - Horizontal and vertical

HMI

Hardware description

General data

HB160 | PPC | 67K-RRJ0 | en | 23-10 18

EMC Standard Comment

Emitted interference EN 61000-6-4 Class A (Industrial area)

Noise immunity

zone B

EN 61000-6-2 Industrial area

EN 61000-4-2 ESD

8kV at air discharge (degree of severity 3),

4kV at contact discharge (degree of severity 2)

EN 61000-4-3 HF field immunity (casing)

80MHz … 1000MHz, 10V/m, 80% AM (1kHz)

1.4GHz ... 2.0GHz, 3V/m, 80% AM (1kHz)

2GHz ... 2.7GHz, 1V/m, 80% AM (1kHz)

EN 61000-4-6 HF conducted

150kHz … 80MHz, 10V, 80% AM (1kHz)

EN 61000-4-4 Burst, degree of severity 3

EN 61000-4-5 Surge, degree of severity 31

1) Due to the high-energetic single pulses with Surge an appropriate external protective circuit with lightning protection elements like conductors for lightning and overvoltage is

necessary.

2.6 Use in difficult operating conditions

Without additional protective measures, the products must not be used in

locations with difficult operating conditions; e.g. due to:

–dust generation

–chemically active substances (corrosive vapors or gases)

–strong electric or magnetic fields

HMI Hardware description

Use in difficult operating conditions

HB160 | PPC | 67K-RRJ0 | en | 23-10 19

2.7 Technical data

Order no. 67K-RRJ0-EB

Type Panel PC PPC010 CE

Display

Display size (diagonal) 10.1 "

Display size (width) 217 mm

Display size (height) 136 mm

Resolution 800 x 1280 / 1280 x 800

Aspect ratio 16:10

Type of display TFT color (262K colors)

MTBF Backlights (25°C) 50000 h

System properties

Processor Intel Celeron Quad core 2 GHz

Operating system Windows Embedded Compact 7

User software Movicon 11 CE Standard

Work memory 2 GB

User memory 2 GB

Available memory (user data) 1600 MB

SD/MMC Slot -

CF Card Slot Typ II -

CFast Slot ü

Time

Real-time clock buffered ü

Clock buffered period (min.) 4 y

Type of buffering lithium battery

Load time for 50% buffering period -

Load time for 100% buffering period -

Accuracy (max. deviation per day) 10 s

Operating controls

Touchscreen PCAP

Touch function Dual Touch

Keyboard external via USB

Mouse external via USB

Interfaces

MPI, PROFIBUS-DP -

MPI, PROFIBUS-DP connector -

Serial, COM1 RS232 / RS422 / RS485

HMI

Hardware description

Technical data

HB160 | PPC | 67K-RRJ0 | en | 23-10 20

La pagina sta caricando ...

VIPA Panel PC PPC010 EC Manuale del proprietario

VIPA Panel PC PPC010 EC Manuale del proprietario

in altre lingue