Husqvarna P 535HX Manuale utente

P 535HX

EN Operator's manual 2-74

ES Manual de usuario 75-153

IT Manuale dell'operatore 154-231

PT Manual do utilizador 232-309

Contents

Introduction..................................................................... 2

Safety............................................................................12

Assembly...................................................................... 27

Operation...................................................................... 31

Maintenance................................................................. 40

Troubleshooting............................................................ 60

Transportation, storage and disposal........................... 65

Technical data.............................................................. 67

Service..........................................................................72

EC Declaration of Conformity....................................... 73

Introduction

Pre-delivery inspection and product

numbers

Note: A pre-delivery inspection has been done of

this product. Make sure that you receive a signed

copy of the pre-delivery inspection document from your

champion.

Service agent contact informa-

tion:

This operator’s manual belongs to product with product number / serial number:

/

Engine:

Transmission:

Product description

The product is a front mower with hybrid technology.

The power sources are a diesel engine and a 48

V system with batteries, motors and generator. The

product has headlights and an easy to use touch

display. The speed is adjusted with forward and

rearward pedals. The product has all-wheel drive (AWD)

and automatic brake. You can use the product with

different types of cutting decks or other Husqvarna

approved equipment.

Intended use

The product is made for operation in commercial areas.

Use the product with cutting decks to cut grass, or

with other equipment for other tasks. Speak to your

Husqvarna dealer for more information about which

cutting decks or equipment that are available. The

product does not operate when the temperature in the

48 V batteries is less then 0 °C/32 °F. For winter use,

we recommend you to park your product indoors with an

ambient temperature temperature more than 0 °C.

Insure your product

Make sure that you have insurance coverage for your

new product. Speak to your insurance company if you

are not sure. We recommend a fully comprehensive

insurance that includes third party, fire, damage, theft

and liability.

Firmware

Make sure that the latest software versions are installed

on the product. Speak to your Husqvarna servicing

dealer.

21591 - 007 - 18.03.2022

Product overview

12

4

5

6

78 9 1110 12

13

14

17 16 15

21

22

27

28

29

23

18

20

25 24 19

3

26

1. Forward pedal

2. Rearward pedal

3. Hydraulic coupling and power outlet for the auxiliary

system.

4. Manual parking brake

5. Power switch for the auxiliary (AUX) system

6. Lever for the auxiliary system, for example cutting

height for the cutting deck models with the mark X

7. Lever for the hydraulic lifting arms, for example to lift

or lower the cutting deck or other equipment

8. PTO (Power Take Off) button

9. Start button for the electrical drive

10. Start button for the hybrid drive

11. Power key

12. PTO speed switch

13. Optional position for accessory switch

14. Optional position for accessory switch

15. Optional position for accessory switch

16. Power switch for the power outlet

17. Power switch for the headlights

18. Type plate

19. Counterweight (accessory)

20. Main switch, 12 V

21. ROPS (roll over protective structure)

22. Fuel tank cap

23. Seat belt

24. 48 V servicing plug

25. Charging socket for the power supply

26. PTO shaft (below bottom plate)

27. Display

28. Hydraulic lifting arms

29. Service stay, Combi cutting decks

1591 - 007 - 18.03.2022 3

Electrical system

Electrical system overview 48 V

12

11

1

8 7

6

4

3

10

14

9

15

5

2

13

16

1. Wheel motors

2. Motor controls

3. DC/DC charger, 48 V/12 V

4. Batteries 48 V

5. Generator 48 V

6. Charging socket 48 V

7. Cooling fan for the 48 V batteries

8. Servicing plug 48 V

9. Fuse 48 V

10. Vehicle control unit (VCU)

11. Electrical motor for hydraulic pump

12. Motor control unit for the hydraulic system

13. Fuse 48 V

14. Interlock relay

15. Precharge relay

16. DC/DC charger relay

41591 - 007 - 18.03.2022

Electrical system overview 12 V

10

11

1

7

8

3

9

6

5

13

20

12

2

4

23

17

16

15

18

21

19

14

22

24

1. Battery, 12 V

2. Glow plug relay, engine

3. Main switch, 12 V

4. Main fuses, 12 V electrical system

5. Fuel level sensor

6. Operator presence control (OPC)

7. High beam light

8. Work light

9. PTO clutch

10. Control box

11. Mower control module

12. USB outlet, 5 V

13. Power outlet, 12 V

14. 12 V generator

15. Fuses

16. Connection terminal for optional accessories

17. Fuses

18. Control box main relay

19. PTO coupling relay

20. Diesel temperature sensor

21. Oil pressure sensor

22. Fuel hold relay

23. Memory fuse for mower control module

24. Start prevent relay

1591 - 007 - 18.03.2022 5

Fuse overview

12

14

15

16

17

18

13

1 2 10 113 4 5 6 7 8 9

A

BC

19

A: Control box. Refer to

To replace the fuses in the fuse box on page 50

for how to replace a fuse.

B: Fuses, 48 V electrical system. Refer to

To replace the fuses of the 48 V electrical system on page 50

for how to

replace a fuse.

C: Main fuses, 12 V electrical system. Refer to

To replace the fuses of the 12 V electrical system on page 50

for how

to replace a fuse.

1. 12 V power to the mower control module , 20 A.

2. Display power, 5 A.

3. Ignition power, 5 A.

4. J14, 12 V warning light, 10 A.

5. J16, 12 V optional switch, optional out, optional

power, 10 A.

6. Parking brake/seat, USB, 12 V outlet, 10 A.

7. Light power, 10 A.

8. USB, 12 V outlet, 12 V switch power.

9. Cabin power, auto fuse.

10. 12 V battery, 10 A.

11. Mower control module AUX, 10 A.

12. 48 V to pre-charge relay, 10 A.

13. 48 V to DC/DC charger in, 10 A.

14. Available position.

15. Available position.

16. 12 V to glow plug relay, 50 A.

17. 12 V to fuse box, 50 A.

18. 12 V main fuse, 150 A

61591 - 007 - 18.03.2022

19. Memory fuse for mower control module, 3 A

Display overview

The display shows the status of the product. When an

indication light comes on, an information box will show

with information and instructions. Also refer to

Display -

Troubleshooting on page 63

.

1 3

18 1721

22

24

20 19

4

6 8 11

12

13

14

15

16

10

752 9

23

1. Time, language and system menu. This symbol

shows on the display when the product is stationary

for more than 6 seconds.

2. Gauge for the electrical drive

3. Manual parking brake indicator

4. Work light or high beam light indicator / Road kit

work light

5. Speed in km/h when in operation / Total operation

time when in idle position

6. Clock

7. Hour meter

8. Bluetooth® indicator

9. Service indicator

10. Gauge for the PTO speed

11. Screen brightness adjustment. This symbol shows

on the display when the product is stationary for

more than 6 seconds.

12. Generator fault indicator

13. Engine temperature indicator

14. Battery indicator, 12 V

15. Oil pressure indicator

16. Fuel level status, %

17. Fuel level status, bar

18. Fuel level indicator

19. PTO button indicator, engaged/disengaged

20. Battery level status, % / Drive mode selection

indicator

21. Battery level status, bar / Drive mode selection

indicator

22. Battery level indicator, 48 V

23. Battery temperature indicator

24. Operator presence control (OPC)

Display guides and gauges

C

B D

A

1591 - 007 - 18.03.2022 7

• (A): The blue field in the guide is the charge and the

upper half of the guide is the discharge.

• (B): The charge or discharge from the 48 V batteries.

The batteries charge when the indication is in the

lower half of the gauge.

• (C): The green field in the guide shows the

recommended PTO speed. If the load is to high,

the PTO rpm drops and can cause decreased

performance or an engine stop.

• (D): The PTO speed in rpm.

Total operation time and hour meter

The total operation time (A) of the engine shows on

the display when the product is in idle position. The

hour meter (B) shows the operation time in hours and

minutes when hybrid drive is on. The trip meter is

automatically set to 0 when the engine is off for more

than 6 hours.

A

B

Hybrid system

During operation, the 48 V batteries are charged by the

generator when the engine is on. The 48 V batteries are

also charged by the wheel motors through regenerative

braking. The engine also charges the 12 V battery.

The state of charge of the 48 V batteries shows on

the display. You can connect the power supply to the

product to increase the charge of the the 48 V batteries

during stops. Refer to

Display guides and gauges on

page 7

.

Mower control module

The product has a mower control module that gives the

operator information about the product. The information

shows on the display on the instrument panel. Refer to

Display overview on page 7

.

The mower control module enables the servicing dealer

to connect to the product when they do servicing.

Vehicle control unit (VCU)

The VCU controls the different units in the 48 V system,

such as motors and batteries.

Cooling fans for the electrical system

The cooling fan for the 48 V batteries prevents the

temperature in the 48 V batteries to become too hot.

Note: The cooling fan for the 48 V batteries can

continue to operate for until an hour after the power key

is set to OFF.

The cooling fan for the motor control unit for the

hydraulic system operates when the power key is in

the ON position. You find the cooling fan for the motor

control unit for the hydraulic system directly above the

motor control unit for the hydraulic system.

Refer to

Electrical system overview 48 V on page 4

to

see where the cooling fan for the 48 V batteries and

the motor control unit for the hydraulic system is on the

product.

Headlights

The product has a work light and a high beam light.

Push the power switch to position (A) to make the lights

go off. Push the power switch to position (B) to make the

work light come on. Push the power switch to position

(C) to also make the high beam light come on.

AC

B

The work light stays on for 3 minutes after the power key

is set to STOP. When the headlights are on, the display

shows the headlight symbol. Refer to

Display overview

on page 7

.

Power outlet

The voltage of the power outlet is 12 V. The power outlet

has a fuse. Refer to

Fuse overview on page 6

.

Set the power outlet to ON or OFF with the power switch

found on the control panel.

81591 - 007 - 18.03.2022

Operator presence control (OPC)

The OPC is engaged when the operator lifts from the

seat. The OPC indicator in the display comes on. The

OPC engages the safety circuit. Refer to

Safety circuit

on page 22

.

Drive mode

The product has 3 available drive modes (Comfort,

Standard and Dynamic). Standard drive mode is set

from the factory. The last selected drive mode is saved.

To select a drive mode refer to

To select a drive mode

on page 36

.

PTO (Power Take-Off) button

The PTO button engages and disengages the PTO

clutch and the cutting deck or other equipment

connected to it. The correct start conditions must be

obeyed to engage the drive of the blades. Refer

to

Safety circuit on page 22

for the correct start

conditions.

• Pull the PTO button out to engage the drive to the

blades or other equipment.

• Push the PTO button in to disengage the drive to the

blades or other equipment.

PTO speed switch

The PTO speed switch can be set in 3 positions for

operation with different types of cutting decks or other

equipment. When the PTO button is engaged, the

engine speed is supplied to the cutting deck or other

equipment that is attached to the PTO shaft. Refer to

To

set the PTO speed on page 37

and

Technical data on

page 67

.

Note: For operation with cutting decks, use the high

PTO speed.

Forward and rearward pedals

The speed is gradually adjusted with 2 pedals. The left

pedal (A) is used to move forward, and the right pedal

(B) is used to move rearward. The product brakes when

the pedals are released.

B

A

Lever for the hydraulic lifting arms

The lever for the hydraulic lifting arms is used to lift and

lower the cutting deck and other equipment.

A

B

CD

WARNING: It is possible to lower the

hydraulic lifting arms after you stopped the

product. Make sure to stop the product

where the cutting deck or other equipment

can be lowered safely.

• (A) Float position (mow position), the cutting deck or

other equipment follows the ground independently of

the product.

• (B) To lower the cutting deck or other equipment.

• (C) Neutral position.

• (D) To lift the cutting deck or other equipment.

1591 - 007 - 18.03.2022 9

Auxiliary power switch (AUX)

The auxiliary power switch has different functions for

different cutting decks and for other equipment. Refer

to the operator's manual of the cutting deck or other

equipment.

Cutting deck

With this product you can use the Combi cutting decks

or the R180 cutting deck. Refer to

Technical data on

page 67

.

The Combi cutting decks operate with BioClip® or rear

discharge. The R180 cutting decks operate with rear

discharge. BioClip® cuts the grass into smaller pieces

(mulch), that works as a fertilizer to the lawn. When the

BioClip® plug is removed, the cutting deck discharges

the grass rearward.

Symbols on the product

WARNING: This product can be

dangerous and cause serious injury or

death to the operator or others. Be careful

and use the product correctly.

Read the operator's manual carefully

and make sure that you understand the

instructions before you use this product.

Keep persons and animals at a safe

distance from the work area.

Remove the power key before you do

maintenance on the product.

Rotating blades. Keep body parts away

from the cutting deck when the engine is

on.

Warning: rotating parts. Keep body parts

away.

Warning: rotating belt pulley. Keep body

parts away when the engine is on.

Warning: risk of crush injuries.

Warning: risk of crush injuries. The lift

arms will move with great force, keep

body parts away.

Look out for thrown objects and ricochets.

Hot surface.

Never use the product if persons,

especially children, or animals, are in the

vicinity.

Look behind you before and while you

move the product rearward.

Never cut grass across a slope. Do not

cut grass on ground that slopes more than

10°. See

To cut grass on slopes on page

17

.

Never carry passengers on the product or

equipment.

Risk of injury if the product overturns.

Move forward.

Neutral gear.

10 1591 - 007 - 18.03.2022

Move rearward.

Apply parking brake.

Release parking brake.

Always use approved hearing protection.

Float position.

Parking brake.

Activate the product.

Start electrical drive.

Start hybrid drive.

Power off.

Push in the PTO button.

Pull out the PTO button.

Fuel.

Oil level.

This product is in accordance with

applicable EC directives.

Noise emission to the environment

as per EU and UK directives and

regulations, and New South Wales

legislation "Protection of the Environment

Operations (Noise Control) Regulation

2017". The guaranteed sound power level

of the product is specified is specified in

Technical data on page 67

and on the

label.

Scannable code

Environmental mark. The product or

package of the product is not domestic

waste. Recycle it at a recycling station for

electrical and electronic equipment.

Do not use the seat belt if the

ROPS is down.

Always use the seat belt when

the ROPS is up.

Note: Other symbols/decals on the product refer to

certification requirements for some commercial areas.

1591 - 007 - 18.03.2022 11

Type plate

1

2

3

4

5

6

7

8

9

10

11

12

13

1. Husqvarna Identity (HID) with article number, factory

and line, date, sequence number and control number

2. Model name

3. Product number code (PNC)

4. Scannable code

5. Production year

6. Rated power

7. Serial number with production date, year, week and

sequence number

8. Manufacturer and manufacturer address

9. Product number code (PNC)

10. Product weight, unladen

11. Maximum front axle weight (GAWR)

12. Maximum rear axle weight (GAWR)

13. Maximum laden weight (GCWR)

Euro V Emissions

WARNING: Tampering with the engine

voids the EU type-approval of this product.

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:

• the product is incorrectly repaired.

• the product is repaired with parts that are not

from the manufacturer or not approved by the

manufacturer.

• the product has an accessory that is not from the

manufacturer or not approved by the manufacturer.

• the product is not repaired at an approved service

center or by an approved authority.

Safety

Safety definitions

Warnings, cautions and notes

are used to point out specially

important parts of the manual.

WARNING: Used if

there is a risk of

injury or death for the

operator or bystanders

if the instructions in the

manual are not obeyed.

CAUTION: Used if there

is a risk of damage to the

product, other materials

or the adjacent area if

the instructions in the

manual are not obeyed.

Note: Used to give more

information that is necessary in

a given situation.

General safety instructions

WARNING: This product

can cut off hands and

feet and throw objects.

Serious injury or death

may occur if you do

12 1591 - 007 - 18.03.2022

not obey the safety

instructions.

WARNING: Do not

continue to use a product

with damaged cutting

equipment. Damaged

cutting equipment can

throw objects and

cause serious injury or

death. Replace damaged

blades immediately.

WARNING: This

product produces an

electromagnetic field

during operation. This

field may under some

circumstances interfere

with active or passive

medical implants. To

reduce the risk of

serious or fatal injury

we recommend persons

with medical implants to

consult their physician

and the medical implant

manufacturer before

operating this product.

WARNING: Read the

warning instructions that

follow before you use the

product.

• Do not use the product

with cutting decks or other

equipment that is not

approved by Husqvarna.

• Do not apply too much load to

the product. For example do

not tow or lift more than the

product is approved for.

• Always be careful and use

your common sense. Avoid all

situations which you consider

to be beyond your capability.

If you feel uncertainty about

the operating procedures

after you read the operator's

manual, consult an expert

before you continue.

• Read and understand the

operator's manual and the

instructions on the product

carefully before you start the

product.

• Learn how to use the product

and its controls safely and

learn how to stop the product

quickly.

• Learn to recognize the safety

decals.

• Keep the product clean

to make sure that you

can clearly read signs and

stickers.

• Keep in mind that the

operator will be held

1591 - 007 - 18.03.2022 13

responsible for accidents that

involve other persons or their

property.

• Do not transport passengers.

The product must only be

used by one person.

• Do not let the product stay

unsupervised with the engine

or the electrical motors on.

Always stop the blades, apply

the parking brake, stop the

engine and the electrical

motors, and remove the

power key before you let the

product stay unsupervised.

• Only use the product in

daylight or in other well-lit

conditions. Keep the product

at a safe distance from holes

or other irregularities in the

ground. Look out for other

possible risks.

• Do not use the product in

bad weather, for example

in fog, in rain, moist or in

wet locations, strong winds,

intense cold, risk of lightning,

etc.

• Find and mark stones and

other fixed objects to prevent

collision.

• Clear the area of objects such

as stones, toys, wires, etc.

that may become caught in

the blades and be thrown out.

• Do not let children or other

persons not approved for

operation of the product to

use or do servicing on it.

Local laws may regulate the

age of the user.

• Make sure that nobody else

is in the vicinity of the

product when you start the

electrical motors and the

engine, engage the drive or

start to move the product.

• Keep an eye on the traffic

when you mow near a road or

move across a road.

• Do not use the product if you

are fatigued, while under the

influence of alcohol or drugs,

medicine or anything that

14 1591 - 007 - 18.03.2022

can have a negative effect

on your vision, alertness,

coordination or judgement.

• Do not change the adjustment

for the engine speed control.

• Always park the product on a

level surface with the engine

and the electrical motors

stopped.

Safety instructions regarding

children

WARNING: Read the

warning instructions that

follow before you use the

product.

•Serious accidents can occur

if you are not on your guard

for children in the vicinity of

the product. Children may

come near the product when

you do not see them. It is

very possible that children do

not stay where you last saw

them.

•Keep children away from the

area to be mowed. Make sure

that an adult is responsible for

the children.

•Keep an eye out and stop

the product if children enter

the work area. Be very careful

near corners, bushes, trees or

other objects that prevents a

clear view.

•Before and while you move

the product in reverse, look

behind you and look down to

make sure there are no small

children in the vicinity of the

product.

•Do not let children ride along.

They can fall off and get

seriously injured or prevent

safe maneuvering of the

product.

•Do not let children operate

the product.

Safety instructions for operation

WARNING: Do not touch

the engine or exhaust

system during or directly

after operation. The

engine and the exhaust

system become very hot

during operation. Risk of

burn injuries, fire and

damage to property or

adjacent areas. When

you operate the product,

1591 - 007 - 18.03.2022 15

keep away from bushes

and other objects.

WARNING: Do not touch

the power electronics

during or directly

after operation. The

batteries, generator,

motor controls, fuses

or electrical cables

become very hot during

operation. Risk of burn

injuries, electrical shock,

fire and damage to

property or adjacent

areas.

WARNING: Read the

warning instructions that

follow before you use the

product.

•Always look down and behind

you before and while you

move in reverse. Look out for

large and small obstacles.

•Decrease the speed before

you turn around a corner.

•Stop the blades when you

move across areas that you

do not cut.

•Push the PTO button to

disengage the drive on

the cutting deck or other

equipment before you lift from

the seat.

CAUTION: Read the

caution instructions that

follow before you use the

product.

•Before you operate the

product, clear the cold air

intake of the engine from

grass and dirt. If the cold air

intake is blocked, there is a

risk of engine damage.

•Before you operate the

product, make sure that the

air intake to the battery

cooling system is not blocked.

There is a risk of damage to

the batteries if they get too

hot.

•Move around stones and

other larger objects carefully

and make sure that the

blades do not hit the objects.

•Be careful if you operate the

product near water. Do not

use the ROPS and the seat

belt near water.

•Do not operate the product

across objects. Stop and

examine the product and

cutting deck if you operate

the product across or into

an object. If it is necessary,

make repairs before you

restart.

16 1591 - 007 - 18.03.2022

To cut grass on slopes

WARNING: Read the

warning instructions that

follow before you use the

product.

•To cut grass on slopes

increases the risk that you

can not control the product

and that it overturns. This can

cause injury or death. It is

necessary to cut the grass

carefully on all slopes. If you

cannot reverse up a slope or

if you do not feel safe, do not

cut it.

•Remove stones, branches

and other obstacles.

•Cut up and down the slope,

not from side to side.

•Do not move down a slope

with the cutting deck lifted.

•Do not operate the product on

ground that slopes more than

10°.

•Do not start or stop on a

slope.

•Move smoothly and slowly on

slopes.

•Do not make sudden changes

in speed or direction.

•Do not turn more than

necessary. Turn slowly and

gradually when you move

down a slope. Move at

low speed. Turn the wheel

carefully.

•Look out for and do not move

across furrows, holes and

bumps. There is a higher risk

that the product overturns on

ground that is not flat. Long

grass can hide obstacles.

•Do not cut grass near edges,

ditches or banks. The product

can suddenly overturn if a

wheel moves across the edge

of a steep slope or a ditch, or

if an edge gives way. If the

product falls into water, there

is a risk of drowning.

•Do not mow wet grass. It is

slippery, and tires can lose

their grip so that the product

skids.

1591 - 007 - 18.03.2022 17

•Do not put your foot on the

ground to try to make the

product more stable.

•Move very carefully if an

accessory or other object is

attached that can make the

product less stable.

•To make the product

more stable, attach the

counterweights. Speak to

your dealer for more

information.

Personal protective equipment

WARNING: Read the

warning instructions that

follow before you use the

product.

•Use approved personal

protective equipment when

you use the product. Personal

protective equipment cannot

fully prevent injury but it

decreases the degree of

injury if an accident does

occur. Let your dealer

help you select the right

equipment.

•Use approved hearing

protection that provides

adequate noise reduction.

Long-term exposure to

noise can result

in permanent hearing

impairment. Husqvarna

recommends that operators

use hearing protectors when

using products for a longer

coherent time of a day.

Continual and regular users

should have their hearing

checked regularly. Note that

hearing protectors limit the

ability to hear sounds and

warning signals.

•Use approved eye protection.

If you use a visor, you must

also use approved protective

goggles. Approved protective

goggles must agree with

the ANSI Z87.1 standard in

the USA or EN 166 in EU

countries.

•Always wear protective shoes

or protective boots. Steel toes

are recommended. Do not

use the product barefoot.

•Wear gloves when necessary,

for example when you attach,

18 1591 - 007 - 18.03.2022

examine or clean the cutting

equipment.

•Do not wear loose-fitting

clothing, jewelry or other

items that can get caught in

moving parts.

•Keep first aid equipment

and fire extinguisher close at

hand.

Battery safety

WARNING: Read the

warning instructions that

follow before you use the

product.

General:

•Read all safety warnings

and all instructions. Failure

to follow the warnings and

instructions may result in

electric shock and fire and/or

serious injury.

•Regular check that the

batteries are intact. Damaged

or modified batteries may

exhibit unpredictable behavior

resulting in fire, explosion or

risk of injury. Never repair or

open damaged batteries.

•A damaged battery can cause

an explosion and cause

injury. If the battery has a

deformation or is damaged,

do not use the product

and speak to an approved

Husqvarna service agent.

•Do not dismantle, open or

shred batteries.

•Do not subject batteries to

mechanical shock.

•Do not expose cells or

batteries to heat or fire. Avoid

storage in direct sunlight.

•Do not short circuit batteries.

Do not keep batteries in

storage where they can short

circuit each other or be

short circuited by other metal

objects.

•Do not allow battery content

to come in contact with

the skin or eyes. If contact

has been made, wash the

affected area with copious

amounts of water and seek

medical advice.

•Do not use any battery which

is not designed for use with

the equipment.

•Do not mix cells of different

manufacture, capacity, size or

type within a device.

•Keep cells or batteries out of

the reach of children.

•Keep the battery clean and

dry.

•Use only the battery in the

application for which it was

intended.

12 V battery:

1591 - 007 - 18.03.2022 19

•Observe the plus (+) and

minus (-) marks on the battery

and equipment, and ensure

correct use.

•Always purchase the correct

battery for the equipment.

•Wipe the battery terminals

with a clean dry cloth if they

become dirty.

48 V batteries:

•The Husqvarna 48 V

batteries, are exclusively

used as power supply for the

Husqvarna hybrid P 535HX.

To avoid injury, the battery

must not be used as a power

source for other devices.

•Never use batteries or

appliances that is faulty,

modified or damaged.

•Never attempt to modify or

repair the appliances or the

batteries. Entrust all repairs

to your authorized servicing

dealer only.

Fuel safety

WARNING: Be careful

with fuel. It is very

flammable, and can

cause injury and damage

to property.

WARNING: Read the

warning instructions that

follow before you use the

product.

•Do not fill the fuel tank

indoors.

•Diesel and diesel fumes

are poisonous and very

flammable. Be careful with

diesel to prevent injury or fire.

•Do not remove the fuel tank

cap or fill the fuel tank when

the engine is on.

•Do not smoke when you fill

fuel.

•Do not fill fuel near sparks or

naked flames.

•If there are leaks in the

fuel system, do not start the

engine until the leaks are

repaired.

•Do not fill above

recommended fuel level. The

heat from the engine and the

sun makes the fuel expand

and the fuel overflows if the

tank is filled too much.

•Do not fill too much. If you

spill fuel on the product, clean

up the spill and wait until it

is dry before you start the

engine. If you spill on your

clothing, change it.

•Store fuel in approved

containers only.

•Store the product and fuel in

such a way that there is no

20 1591 - 007 - 18.03.2022

La pagina sta caricando ...

Husqvarna P 535HX Manuale utente

Husqvarna P 535HX Manuale utente

in altre lingue

Documenti correlati

Altri documenti