LD Systems MAUI® 28 G3 Manuale del proprietario

MAUI® G3 SERIES

COMPACT COLUMN PA SYSTEMS

LDMAUI11G3(W) / LDMAUI28G3(W)

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D´UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D´USO

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 4

INTENDED USE 4

EXPLANATIONS OF TERMS AND SYMBOLS 4

SAFETY INSTRUCTIONS 5

PACKAGING CONTENT 8

CONNECTIONS, CONTROLS AND INDICATORS 12

CARE, MAINTENANCE AND REPAIR 15

OPTIONAL ACCESSORIES 16

TECHNICAL DATA 16

DISPOSAL 19

MANUFACTURER'S DECLARATIONS 19

DEUTSCH

INFORMATIONEN ZU DIESER

BEDIENUNGSANLEITUNG 21

BESTIMMUNGSGEMÄSSER GEBRAUCH 21

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 21

SICHERHEITSHINWEISE 22

LIEFERUMFANG 26

ANSCHLÜSSE, BEDIENELEMENTE UND ANZEIGEN 30

PFLEGE, WARTUNG UND REPARATUR 33

OPTIONALES ZUBEHÖR 34

TECHNISCHE DATEN 34

ENTSORGUNG 37

HERSTELLERERKLÄRUNGEN 38

FRANCAIS

INFORMATIONS SUR CE MODE D‘EMPLOI 39

UTILISATION RÉGLEMENTÉE 39

EXPLICATIONS DES TERMES ET DES SYMBOLES 39

CONSIGNES DE SÉCURITÉ 40

CONTENU DU CARTON 44

CONNEXIONS, COMMANDES ET INDICATEURS 48

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 51

ACCESSOIRES EN OPTION 52

CARACÉRISTIQUES TECHNIQUES 52

MISE EN DÉCHETTERIE 55

DÉCLARATIONS DU FABRICANT 56

ESPAÑOL

INFORMACIÓN SOBRE ESTAS INSTRUCCIONES

DE USO 57

USO CONFORME A LA NORMATIVA 57

EXPLICACIONES DE TÉRMINOS Y SíMBOLOS 57

INSTRUCCIONES DE SEGURIDAD 58

CONTENIDO DEL EMBALAJE 62

CONEXIONES, CONTROLES E INDICADORES 66

CUIDADO, MANTENIMIENTO Y REPARACIÓN 69

ACCESORIOS OPCIONALES 70

DATOS TÉCNICOS 70

DISPOSICIÓN 73

DECLARACIONES DEL FABRICANTE 74

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ

INSTRUKCJI OBSŁUGI 75

STOSOWANIE ZGODNIE Z PRZEPISAMI 75

OBJAŚNIENIA TERMINÓW I SYMBOLI 75

INSTRUKCJE BEZPIECZEŃSTWA 76

ZAWARTOŚĆ OPAKOWANIA 80

POŁĄCZENIA, ELEMENTY STERUJĄCE I WSKAŹNIKI 84

PIELĘGNACJA, KONSERWACJA I NAPRAWA 87

AKCESORIA OPCJONALNE 88

DANE TECHNICZNE 88

DYSPOZYCJA 91

OŚWIADCZENIA PRODUCENTA 92

ITALIANO

INFORMAZIONI SU QUESTE ISTRUZIONI PER L‘USO 93

UTILIZZO IN CONFORMITÀ ALLE NORMATIVE 93

SPIEGAZIONI DI TERMINI E SIMBOLI 93

ISTRUZIONI DI SICUREZZA 94

CONTENUTO DELL’IMBALLAGGIO 98

CONNESSIONI, CONTROLLI E INDICATORI 102

CURA, MANUTENZIONE E RIPARAZIONE 105

ACCESSORI OPZIONALI 106

DATI TECNICI 106

SMALTIMENTO 109

DICHIARAZIONI DEL PRODUTTORE 110

3

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This unit has been designed and manufactured to high quality standards to ensure many years of

trouble-free operation. This is what LD Systems stands for with its name and many years of experience

as a manufacturer of high-quality audio products. Please read this user manual carefully so that you

can quickly get the most out of your new LD Systems product.

You can find more information about LD Systems on our website WWW.LD-SYSTEMS.COM

INFORMATION ON THIS USER MANUAL

• Read the safety instructions and the entire manual carefully before turning the device on.

• Observe the warnings on the unit and in the user manual

• Always keep the operating instructions within reach.

• If you sell or pass on the unit, be sure to hand over this user manual as well, as they are an essential

part of the product.

INTENDED USE

The product is a device for event technology!

The product has been developed for professional use in the field of event technology and is not suitable

for use in households!

Furthermore, this product is only intended for qualified users with expertise in

handling event technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use!

Liability for damage and third-party damage to persons and property due to improper use is excluded!

The product is not suitable for:

• Persons (including children) with reduced physical, sensory or mental capabilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the appliance).

EXPLANATIONS OF TERMS AND SYMBOLS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING:The word WARNING, possibly in combination with a symbol, is used to indicate potentially

hazardous situations or conditions to life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situations

or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, is used to indicate

situations or conditions that may result in property and/or environmental damage.

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

4

This symbol indicates hazards that may cause electric shock.

This symbol indicates danger points or dangerous situations.

This symbol indicates dangers due to hot surfaces.

This symbol indicates dangers due to high volume levels.

This symbol indicates supplementary information on the operation of the product.

This symbol indicates a unit that does not contain any user-replaceable parts.

SAFETY INSTRUCTIONS

DANGER:

1. Do not open or modify the unit.

2. If your unit no longer functions properly, if liquids or objects have got inside the unit, or if

the unit has been damaged in any other way, switch it off immediately and disconnect it

from the power supply. This appliance may only be repaired by authorised specialists.

3. For protection class 1 units, the protective earth conductor must be connected correctly.

Never interrupt the protective earth conductor. Devices of protection class 2 do not have

a protective earth conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the appliance fuse.

WARNING:

1. The unit must not be put into operation if it shows obvious damage.

2. The unit should not be plugged in during installation.

3. If the mains cable of the appliance is damaged, do not operate the appliance.

4. Permanently connected mains cables may only be replaced by a qualified person.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

5

ATTENTION:

1. Do not operate the unit if it has been exposed to large temperature fluctuations

(for example, after transport). Moisture and condensation could damage the unit.

Do not switch on the unit until it has reached ambient temperature.

2. Make sure that the voltage and frequency of the mains supply match the values indicated

on the unit. If the unit has a voltage selector switch, do not connect the unit until it is set

correctly. Only use suitable mains cables.

3. To disconnect the unit from the mains at all poles, it is not sufficient to press the on/off

switch on the unit.

4. Make sure that the fuse used corresponds to the type printed on the unit.

5. Make sure that appropriate measures have been taken against overvoltage

(e.g. lightning strike).

6. Observe the specified maximum output current on units with Power Out connection.

Make sure that the total current consumption of all connected devices does not exceed

the indicated value!

7. Replace pluggable mains cables only with original cables.

DANGER:

1. Danger of suffocation! Plastic bags and small parts must be kept out of reach of persons

(including children) with reduced physical, sensory or mental capabilities.

2. Danger from falling down! Make sure that the unit is securely installed and cannot fall

down. Use only suitable stands or mountings (especially for permanent installations).

Ensure that accessories are properly installed and secured. Make sure that applicable

safety regulations are observed.

WARNING:

1. Use the appliance only in the manner intended.

2. Operate the appliance only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the unit, check all cable routes to avoid damage or accidents,

e.g. due to tripping hazards.

5.

Be sure to observe the specified minimum distance to normally flammable materials!

If this is not explicitly stated, the minimum distance is 0.3 m.

CAUTION:

1. In the case of moving components such as mounting brackets or other moving

components, there is a possibility of jamming.

2. In the case of units with motor-driven components, there is a risk of injury from the

movement of the unit. Sudden movements of the equipment can lead to startle reactions.

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

6

ATTENTION:

1. Do not install or operate the appliance near any radiators, heat registers, stoves or other

heat sources. Always ensure that the unit is installed in such a way that it is sufficiently

cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the appliance.

3. Ventilation openings must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the unit.

6. Observe the IP protection class as well as the ambient conditions such as temperature

and humidity according to the specification.

7. Devices can be constantly further developed. In the event of any discrepancies between

the operating instructions and the appliance labelling with regard to operating conditions,

performance or other appliance characteristics, the information on the appliance always

takes precedence.

8.

The unit is not suitable for tropical climates and for operation above 2000 m above sea level.

CAUTION:

Connecting signal cables can cause considerable noise. Make sure that devices connected to

the output are muted when plugged in. Otherwise, levels of noise can cause damage.

ATTENTION HIGH VOLUME AUDIO PRODUCTS!

This unit is intended for professional use.

Commercial operation of this appliance is subject to the applicable national regulations and

guidelines for accident prevention. Hearing damage due to high volume and continuous ex-

posure: Use of this product may produce high sound pressure levels (SPL) which may cause

hearing damage. Avoid exposure to high volumes.

SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems, Bluetooth):

The quality and performance of wireless signal transmissions is generally dependent on the

environmental conditions.

The range and signal stability are influenced by, for example:

• Shielding (e.g. masonry, metal buildings, water)

• High radio traffic (e.g. strong W-LAN networks)

• Interference

• Electromagnetic radiation (e.g. LED video walls, dimmers)

All range specifications refer to free-field application with visual contact without interference!

The operation of transmitters is subject to official regulations. These can vary from region to

region and must be checked by the operator before commissioning (e.g. radio frequency and

transmission power).

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

7

WARNING:

Units with wireless signal transmission are not suitable for operation in sensitive areas

where radio operation can lead to possible interactions. These include, for example:

• Hospitals, health centres or other healthcare facilities that provide patient treatment with

specialist staff and equipment.

• Class I, II and III hazardous areas

• Restricted areas

• Military facilities

• Aircraft or vehicles

• Areas where the use of mobile phones is prohibited

NOTES FOR PORTABLE INDOOR EQUIPMENT

1. Temporary operation! Event equipment is generally designed for temporary use only.

2. Continuous operation or permanent installation can lead to impairment of the function

and premature ageing of the units.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material.

Check the completeness and integrity of the delivery and please notify your distributor immediately

after purchase if the delivery is not complete or damaged.

The packaging content of the product MAUI 11 G3 includes:

• 1x MAUI 11 G3 Subwoofer, black

• 1x MAUI 11 G3 lower column (LC), black

• 1x MAUI 11 G3 Upper Column (UC), black

• 1x power cable

• User manual

The packaging content of the product MAUI 11 G3 W includes:

• 1x MAUI 11 G3 subwoofer, white

• 1x MAUI 11 G3 lower column (LC), white

• 1x MAUI 11 G3 Upper Column (UC), white

• 1x power cable

• User manual

The packaging content of the product MAUI 28 G3 includes:

• 1x MAUI 28 G3 Subwoofer, black

• 1x MAUI 28 G3 lower column (LC), black

• 1x MAUI 28 G3 Upper Column (UC), black

• 1x power cable

• User manual

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

8

The packaging content of the product MAUI 28 G3 W includes:

• 1x MAUI 28 G3 Subwoofer, white

• 1x MAUI 28 G3 lower column (LC), white

• 1x MAUI 28 G3 Upper Column (UC), white

• 1x power cable

• Operating instructions

PROPERTIES

MAUI 11 G3 (W)

• Powerful bass reproduction with 2 x 8" subwoofer

• Balanced mids thanks to 6 x 3.5" full-range speakers

• Precise and silky highs with 2 x 1" high-frequency drivers

• Cardioid column for controlled low-mid and midrange sound dispersion

• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion

• Optimised bass-reflex design improves bass response and reduces air flow noise

• Can be combined with an additional MAUI® 11 G3 subwoofer for increased low end

or for cardioid subwoofer setups

• New Dynx® DSP for distortion-free sound even at maximum volume

• AAC coding for HD Bluetooth® 5.0 streaming

• Automatic setup detection for quick and easy operation

• Fast and simple assembly without stands or cables

• Rugged birch plywood subwoofer housing with durable polyurea-coating

• Lightweight, powder-coated aluminium column housing

MAUI 28 G3 (W)

• Powerful and deep bass reproduction with 12" subwoofer

• Balanced mids thanks to 12 x 3.5" full-range speakers

• Precise and silky highs with 2 x 1" high-frequency drivers

• Cardioid column for controlled low-mid and midrange sound dispersion

• BEM optimised HF waveguide and midrange phase plugs for homogeneous dispersion

• HF waveguide and midrange phase plugs for homogeneous dispersion

• Optimised bass-reflex design improves bass response and reduces air flow noise

• Can be combined with an additional MAUI® 28 G3 subwoofer for increased low end

or for cardioid subwoofer setups

• New Dynx® DSP for distortion-free sound even at maximum volume

• AAC coding for HD Bluetooth® 5.0 streaming

• Automatic setup detection for quick and easy operation

• Fast and simple assembly without stands or cables

• Rugged birch plywood subwoofer housing with durable polyurea-coating

• Lightweight, powder-coated aluminium column housing

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

9

ASSEMBLY AND CABLING

DANGER: Always place the speaker system in a suitable location on a sufficiently stable,

level and horizontal surface. Make sure that the speaker system cannot fall off the edge

of a stage (e.g. due to vibration). There is a risk that units that have not been set up and

positioned correctly will fall over or down. This can seriously injure or kill people.

CONSTRUCTION

The LD Systems MAUI 11 G3 and MAUI 28 G3 column systems each consist of three components:

A The subwoofer with integrated electronics for all system components.

B The lower column element with the connections on the bottom and top (Lower Column – LC).

C The upper column element with the connection on the underside (Upper Column – UC).

Place the subwoofer in the desired location, plug the lower

column element (LC) onto the connecting element on the top of the subwoofer 1 and then the upper

column element (UC) onto the lower column element 2. Guide bolts made of stainless steel facilitate

correct assembly and ensure a secure hold at the same time. The column elements are automatically

supplied with the corresponding audio signals when the system components are plugged together

using custom-made multipin connectors.

C

B

A

Upper Column – UC

Lower Column – LC

Subwoofer

1

2

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

10

WIRING EXAMPLES

1

2

3

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

11

CONNECTIONS, CONTROLS AND INDICATORS

The connector panels of the MAUI 11 G3 and MAUI 28 G3 column systems are identical and are located on

the rear of the subwoofers.

LD MAUI LINE PANEL V5 26.07.22

6 7

8

9

3 4 5

5

1 2

10

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

12

1 POWER INPUT

IEC mains socket with integrated fuse holder. A suitable mains cable is included in the packaging content.

IMPORTANT NOTE: Replace the fuse only with one of the same type and rating. Pay attention to the

imprint on the housing. If the fuse blows repeatedly, please contact an authorised service centre.

2 POWER

On/off switch. Always switch on the speaker system as the last unit in the signal chain and switch it off

again as the first unit.

3 IN L – R

Stereo line input with two combo jacks (3-pin XLR / 6.3 mm jack) suitable for both balanced and unba-

lanced cabling.

4 THRU L – R

Stereo line output with two male 3-pin XLR sockets (output signal = input signal).

5 SUB OUT

Balanced line output with a male 3-pin XLR socket for driving a follower subwoofer (MAUI 11 G3 or

MAUI 28 G3 subwoofer). Follower subwoofer: Use either line input IN L or R for signal control.

Both level controls MAIN and SUB as well as the Bluetooth unit are deactivated when the MAUI 11 G3 or

MAUI 28 G3 subwoofer is used as a follower subwoofer (speaker columns not mounted).

The description of the Cardioid setup and the expansion with a follower subwoofer without

Cardioid function can be found at 10 CARDIOID ON / OFF.

6 MAIN

Adjust the overall volume. The subwoofer volume is also controlled according to the setting on the SUB

volume control. Turning to the right increases the volume, turning to the left decreases it.

7 SUB

Volume control for the subwoofer. Turning to the right increases the volume, turning to the left

decreases it.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

13

8 STATUS DISPLAY

PROTECT:

The PROTECT indicator lights up permanently if the system is overloaded or overheats.

The integrated amplifiers are automatically muted. After reaching normal operating conditions,

the unit returns to normal operating mode after a few minutes and the PROTECT indicator goes out.

LIMIT:

Lights up when the speaker system is operated in the upper limit range. A short flash of the LIMIT

display is not critical. To protect the system, an excessive signal level is gently reduced by the integrated

limiter. If the LIMIT indicator is lit for a longer time or continuously, reduce the volume level. Failure

to do so may result in distorted sound reproduction and damage to the speaker system.

SIGNAL:

Indicator for the mixer sum signal. The signal acquisition takes place before the MAIN volume control.

POWER:

Lights up when the subwoofer is correctly connected to the mains and switched on.

FOLLOW:

Lights up when the column elements are not installed on the subwoofer. The two level controls

MAIN and SUB as well as the Bluetooth unit are deactivated in this case. Use as a follower subwoofer.

9 HOLD TO LINK

Press the HOLD TO LINK button for about 3 seconds to put the internal Bluetooth module into pairing

standby, by doing so you also disconnect from a previously paired device.

The Bluetooth symbol flashes for the duration of the pairing readiness. Activate Bluetooth on your

playback device (smartphone, tablet, etc.) and select MAUI 11G3 or MAUI 28G3 in the Bluetooth menu.

Pairing now takes place automatically; as soon as the devices are paired, the Bluetooth symbol lights

up permanently. Audio playback via Bluetooth can now be started.

10 CARDIOID ON / OFF

CARDIOID ON:

With the help of another subwoofer (same model) and the Cardioid function,

a subwoofer array with directional radiation can be realised.

The follower subwoofer is placed upright and turned horizontally by 180° directly next

to the main subwoofer (MAIN). Activate the Cardioid function in the follower subwoofer

(CARDIOID ON, see wiring example 3).

CARDIOID OFF:

Deactivate the cardioid function in the follower subwoofer (CARDIOID OFF) and place it

upright in the same orientation directly next to the main subwoofer (MAIN).

11 COOLING FINS

To prevent damage to the unit, do not cover the cooling fins on the back and ensure

that air can circulate freely.

LD MAUI LINE PANEL V5 26.07.22

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

14

CARE, MAINTENANCE AND REPAIR

To ensure the proper functioning of the unit in the long term, it must be regularly maintained and

serviced as required. The need for care and maintenance depends on the intensity of use and the

environment.

We generally recommend a visual inspection before each commissioning. Furthermore, we recommend

that you carry out all the maintenance measures listed below every 500 hours of operation or, in the

case of less intensive use, after one year at the latest. Defects caused by insufficient care may result in

limitations of the warranty claims.

CARE (CAN BE CARRIED OUT BY THE USER)

WARNING! Before carrying out any maintenance work, disconnect the power supply and, if

possible, all connections to the unit.

NOTE! Improper care can lead to impairment or even destruction of the unit.

1. Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can

penetrate the unit.

2. Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make

sure that damage to the unit is prevented (e.g. fans must be blocked for this case).

3. Cables and plug contacts must be cleaned regularly and freed from dust and dirt.

4. In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used for

maintenance, otherwise the surface finish is likely to be impaired. Especially solvents, such as

alcohol, can impair the function of housing seals.

5. Units should generally be stored in a dry place and protected from dust and dirt.

MAINTENANCE AND REPAIR (BY QUALIFIED PERSONNEL ONLY)

DANGER! There are live components in the unit. Even after disconnecting from the mains,

residual voltage may still be present in the unit, e.g. due to charged capacitors.

NOTICE! There are no assemblies in the unit that require maintenance by the user.

NOTICE! Maintenance and repair work may only be carried out by specialist personnel

authorised by the manufacturer. If in doubt, contact the manufacturer.

NOTICE! Improperly performed maintenance work may affect the warranty claim.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

15

OPTIONAL ACCESSORIES

MAUI 11 G3 (W)

• Castor board for MAUI 11 G3 (W)

Article number LDM11G3CB

• Padded carrying bag for MAUI 11 G3 (W) column speaker

Article number LDM11G3SATBAG

• Padded protective cover for MAUI 11 G3 (W) subwoofer

Article number LDM11G3SUBPC

MAUI 28 G3 (W)

• Castor board for MAUI 28 G3 (W)

Article number LDM28G3CB

• Padded carrying bag for MAUI 28 G3 (W) column speaker

Part number LDM28G3SATBAG

• Padded Protective Cover for MAUI 28 G3 (W) Subwoofer

Part Number LDM28G3SUBPC

TECHNICAL DATA

Item number LDMAUI11G3(W) LDMAUI28G3(W)

General

Product type PA Complete Systems PA Complete Systems

Type Powered Powered

Colour Black: LDMAUI11G3

White: LDMAUI11G3W

Black: LDMAUI28G3

White: LDMAUI28G3W

Max. SPL (Peak) 125 dB 127 dB

Frequency response (–10dB) 39 Hz – 20 kHz 37 Hz – 20 kHz

Dispersion angle (H x V) 120° x 30° 120° x 30°

Total Height 2052 mm 2052 mm

Weight 30.7 kg 35.4kg

Features Bluetooth Audio Streaming,

Cardioid column, DSP-based Signal

Processing, Excellent Sound Dispersion,

Mono/ Stereo Application

Bluetooth Audio Streaming,

Cardioid column, DSP-based Signal

Processing, Excellent Sound Dispersion,

Mono/ Stereo Application

Subwoofer

Woofer dimensions 2 x 8" 12"

Woofer dimensions (mm) 2 x 203 mm 305 mm

Woofer magnet Ferrite Ferrite

Woofer brand Custom-made Custom-made

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

16

Item number LDMAUI11G3(W) LDMAUI28G3(W)

Woofer voice coil 2" 3"

Woofer voice coil (mm) 50.8 mm 76.2 mm

Cabinet construction Bass Reflex Bass Reflex

Housing material 15 mm Birch Plywood 15 mm Birch Plywood

Cabinet surface Polyurea Polyurea

Dimensions Subwoofer

(W x H x D)

305 x 607 x 403 mm 370 x 527 x 472 mm

Subwoofer weight 20.5 kg 22.8 kg

Mid/Hi System

Midrange dimensions 6 x 3.5" 12 x 3.5"

Midrange dimensions (mm) 6 x 89 mm 12 x 89 mm

Midrange magnet Ferrite Ferrite

Midrange brand Custom-made Custom-made

Midrange voice coil 0.75" 0.75"

Midrange voice coil 19 mm 19 mm

Tweeter dimensions 2 x 1" 2 x 1"

Tweeter dimensions (mm) 2 x 25.4 mm 2 x 25.4 mm

Tweeter magnet Neodymium Neodymium

Tweeter brand Custom-made Custom-made

Tweeter voice coil 1" 1"

Tweeter voice coil (mm) 25.4 mm 25.4 mm

Wave Guide CD Waveguide CD Waveguide

Loudspeaker inputs 1 1

Speaker input connections Custom-made multipin Custom-made multipin

Cabinet construction mid/high Passive Cardioid Passive Cardioid

Mid/Hi system cabinet

material

Aluminium Aluminium

Mid/Hi system cabinet surface Powder-coated Powder-coated

Mid/Hi system width 103 mm 103 mm

Mid/Hi system height 1460 mm 1540 mm

Mid/Hi system depth 135 mm 135 mm

Mid/Hi system weight 10.2 kg 12.6 kg

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

17

Item number LDMAUI11G3(W) LDMAUI28G3(W)

Amplier module (integrated in subwoofer)

Amplifier Class D Class D

System output (RMS) 730 W 1030 W

System output (Peak) 1460 W 2060 W

Protective circuits DC protection, Multiband limiter,

short circuit, thermal protection

DC protection, Multiband limiter,

short circuit, thermal protection

Cooling Convection Convection

Controls Bluetooth HOLD TO LINK button, Cardioid

On/Off, Main level, Power On/Off, Sub level

Bluetooth HOLD TO LINK button, Cardioid

On/Off, Main level, Power On/Off, Sub level

Indicators Bluetooth, Cardioid On/Off, Follower

mode, Limit, Power, Protect (protection

circuit engaged), Signal, Subwoofer Mode

Bluetooth, Cardioid On/Off, Follower

mode, Limit, Power, Protect (protection

circuit engaged), Signal, Subwoofer Mode

Mains connector IEC power cable (included) IEC power cable (included)

Operating voltage 100 V AC – 120 V AC, 50 – 60 Hz,

220 V AC – 240 V AC, 50 – 60 Hz

100 V AC – 120 V AC, 50 – 60 Hz,

220 V AC – 240 V AC, 50 – 60 Hz

Fuse T 3.15AL / 250 V T 5AL / 250 V

Power consumption 300 W 400 W

Ambient temperature

(operating)

0 – 40 °C 0 – 40 °C

Relative Humidity < 80% (non-condensing) < 80% (non-condensing)

Line Inputs 2 2

Line Input Connectors Combo XLR / TRS Combo XLR / TRS

Line Outputs 1 Sub OUT, 2x THRU 1 Sub OUT, 2x THRU

Line Output Connectors XLR male XLR male

Number of speaker outputs 1 1

Loudspeaker Output Connectors

Custom-made multipin Custom-made multipin

Bluetooth Standard A2DP A2DP

Bluetooth Audio Decoder AAC, SBC AAC, SBC

DSP characteristics

Bit depth AD/DA converter 24 bit 24 bit

Sampling frequency 48 kHz 48 kHz

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

18

DISPOSAL

Packaging:

1. Packaging can be fed into the recycling system via the usual disposal channels.

2. Please separate the packaging according to the disposal laws and recycling regulations in

your country.

Device:

1. This appliance is subject to the European Directive on Waste Electrical and Electronic

Equipment as amended. WEEE Directive Waste Electrical and Electronical Equipment.

Devices and rechargeable batteries do not belong in household waste. The old device

and/or rechargeable batteries must be disposed of via an authorized disposal company

or a municipal disposal facility. Please observe applicable regulations in your country!

2. Observe all disposal laws applicable in your country.

3. As a private customer, you can obtain information on environmentally friendly disposal

options from the dealer from whom the product was purchased or from the relevant

regional authorities.

MANUFACTURER'S DECLARATIONS

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach / E-Mail [email protected] / +49 (0)6081 / 9419-0.

Our current warranty conditions and limitation of liability can be found at:

https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_LD_SYSTEMS.pdf.

In case of service, please contact your sales partner.

UKCA-CONFORMITY

Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable)

Electrical Equipment (Safety) Regulations 2016

Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

Regulation 2012 (SI 2012/3032)

Radio Equipment Regulations 201 7(SI 2016/2015)

UKCA-DECLARATION OF CONFORMITY

Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or

RoHS Regulation can be requested at [email protected]. Products that are subject to the Radio

Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/.

FCC STATEMENT

1.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

19

RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and

Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm between

the radiator & your body.

CE CONFORMITY

Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):

R&TTE (1999/5/EC) or RED (2014/53/EU) as of June 2017.

Low Voltage Directive (2014/35/EU)

EMC Directive (2014/30/EU)

RoHS (2011/65/EU)

The complete Declaration of Conformity can be found at www.adamhall.com.

Furthermore, you can also request it at [email protected].

CE DECLARATION OF CONFORMITY

Declarations of conformity for products subject to the LVD, EMC, RoHS Directive

can be requested from [email protected].

Declarations of conformity for products subject to RED Directive

can be downloaded from www.adamhall.com/compliance/.

Misprints and errors as well as technical or other changes are reserved!

DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

20

DEUTSCH

SIE HABEN DIE RICHTIGE WAHL GETROFFEN!

Dieses Gerät wurde unter hohen Qualitätsanforderungen entwickelt und gefertigt, um viele Jahre einen

reibungslosen Betrieb zu gewährleisten. Dafür steht LD Systems mit seinem Namen und der langjährigen

Erfahrung als Hersteller hochwertiger Audioprodukte. Bitte lesen Sie diese Bedienungsanleitung

sorgfältig, damit Sie Ihr neues Produkt von LD Systems schnell optimal einsetzen können.

Mehr Informationen zu LD Systems finden Sie auf unserer Internetseite WWW.LD-SYSTEMS.COM

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG

• Lesen Sie vor Inbetriebnahme die Sicherheitshinweise und die gesamte Anleitung aufmerksam durch.

• Beachten Sie die Warnungen auf dem Gerät und in der Bedienungsanleitung.

• Bewahren Sie die Bedienungsanleitung immer in Reichweite auf.

• Wenn Sie das Gerät verkaufen oder weitergeben, händigen Sie unbedingt auch diese Bedienungsan-

leitung aus, da sie ein wesentlicher Bestandteil des Produkts ist.

BESTIMMUNGSGEMÄSSER GEBRAUCH

Bei dem Produkt handelt es sich um ein Gerät für die Veranstaltungstechnik!

Das Produkt ist für den professionellen Einsatz im Bereich der Veranstaltungstechnik entwickelt

worden und ist nicht für die Verwendung in Haushalten geeignet!

Weiterhin ist dieses Produkt nur für qualifizierte Benutzer mit Fachkenntnissen im Umgang mit

Veranstaltungstechnik vorgesehen!

Die Benutzung des Produkts außerhalb der spezifizierten technischen Daten und Betriebsbedingungen

gilt als nicht bestimmungsgemäß!

Haftung für Schäden und Drittschäden an Personen und Sachen durch nicht bestimmungsgemäßen

Gebrauch ist ausgeschlossen!

Das Produkt ist nicht geeignet für:

• Personen (einschließlich Kinder) mit eingeschränkten körperlichen, sensorischen oder geistigen

Fähigkeiten oder mangelnder Erfahrung und Kenntnis.

• Kinder (Kinder müssen angewiesen werden, nicht mit dem Gerät zu spielen).

BEGRIFFS- UND SYMBOLERKLÄRUNGEN

1. GEFAHR: Mit dem Wort GEFAHR, evtl. in Kombination mit einem Symbol, wird auf unmittelbar

gefährliche Situationen oder Zustände für Leib und Leben hingewiesen.

2. WARNUNG: Mit dem Wort WARNUNG, evtl. in Kombination mit einem Symbol, wird auf potentiell

gefährliche Situationen oder Zustände für Leib und Leben hingewiesen.

3. VORSICHT: Mit dem Wort VORSICHT, evtl. in Kombination mit einem Symbol, wird auf Situationen

oder Zustände hingewiesen, die zu Verletzungen führen können.

4. ACHTUNG: Mit dem Wort ACHTUNG, evtl. in Kombination mit einem Symbol, wird auf Situationen

oder Zustände hingewiesen, die zu Sach- und/oder Umweltschäden führen können.

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

La pagina sta caricando ...

LD Systems MAUI® 28 G3 Manuale del proprietario

Questo manuale è adatto anche per

LD Systems MAUI® 28 G3 Manuale del proprietario

in altre lingue