Sony XR-CA430X Manuale del proprietario

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

FM/MW/LW Cassette Car Stereo

GB

DE

FR

IT

NL

3-238-147-11 (2)

Wichtig!

Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig

auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser

Bedienungsanleitung.

Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma 1 del D.M. 28.08.

1995 n. 548.

XR-CA430X

XR-CA440

For installation and connections, see the supplied installation/connections manual.

Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung.

En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/

raccordement fourni.

Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni per

l’installazione e i collegamenti in dotazione.

Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding “Installatie

en aansluitingen”.

FM

/

MW

/

LW

Cassette Car Stereo

2

Welcome !

Thank you for purchasing this Sony Cassette

Player. You can enjoy its various features even

more with:

• Optional CD/MD units (both changers and

players)*

1

.

• CD TEXT information (displayed when a CD

TEXT disc*

2

is played on a connected optional

CD unit with the CD TEXT function).

XR-CA440 only

• Optional controller accessory

Rotary commander RM-X4S

*1 This unit works with Sony products only.

*2 A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names. This information is recorded on

the disc.

3

Table of Contents

Location of controls . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 5

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 6

Detaching the front panel . . . . . . . . . . . . . . . 6

Setting the clock . . . . . . . . . . . . . . . . . . . . . . 7

Cassette Player

Listening to a tape . . . . . . . . . . . . . . . . . . . . . 8

Playing a tape in various functions . . . . . . . . 9

Radio

Storing stations automatically

— Best Tuning Memory (BTM). . . . . . . . 9

Storing only the desired stations . . . . . . . . . 10

Receiving the stored stations. . . . . . . . . . . . 10

RDS

Overview of RDS . . . . . . . . . . . . . . . . . . . . 11

Automatic retuning for best reception results

— AF (Alternative Frequencies) . . . . . . 11

Receiving traffic announcements

— TA (Traffic Announcement)/

TP (Traffic Programme) . . . . . . . . . . . . . 12

Presetting RDS stations with AF and

TA setting . . . . . . . . . . . . . . . . . . . . . . . . 13

Tuning in stations by programme type

— PTY (Programme types) . . . . . . . . . . 13

Setting the clock automatically

— CT (Clock Time) . . . . . . . . . . . . . . . . 14

Other Functions

Using the rotary commander

(XR-CA440 only). . . . . . . . . . . . . . . . . . 15

Adjusting the sound characteristics. . . . . . . 16

Quickly attenuating the sound. . . . . . . . . . . 16

Changing the sound and display settings

— Menu . . . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting the sound position

— My Best sound Position (MBP). . . . . 17

Boosting the bass sound

— D-bass . . . . . . . . . . . . . . . . . . . . . . . . 18

CD/MD Unit (optional)

Playing a CD or MD . . . . . . . . . . . . . . . . . . 18

Display items . . . . . . . . . . . . . . . . . . . . . . . 19

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 20

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 20

MP3 playable CD Unit (optional)

Listening to an MP3 file . . . . . . . . . . . . . . . 20

Display items . . . . . . . . . . . . . . . . . . . . . . . 21

Playing tracks repeatedly

— Repeat Play . . . . . . . . . . . . . . . . . . . . 22

Playing tracks in random order

— Shuffle Play. . . . . . . . . . . . . . . . . . . . 22

Additional Information

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22

Removing the unit. . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . 24

Troubleshooting . . . . . . . . . . . . . . . . . . . . . 25

Error displays . . . . . . . . . . . . . . . . . . . . . . . 26

4

Location of controls

Refer to the pages listed for details.

a SOURCE (Power on/Tape/Radio/CD/

MD) select button

b MODE (o) button

Selecting the source.

c VOL +/– button

d ATT (attenuate) button

e Display window

f Z (eject) button 8

g SEEK/AMS button

Tape:

Fast-forwarding, reversing a tape.

Radio:

Tuning in stations automatically.

Finding a station manually.

CD (MP3 files)/MD:

Skipping tracks.

h MBP (My Best sound Position) button

17

i D-BASS button 18

j RELEASE (front panel release) button

k SEL (select) button

Selecting items.

l RESET button (located on the front side of

the unit, behind the front panel) 6

m AF button 11, 13

n SENS/BTM button

Storing the stations with the strongest

signals.

o Number buttons

Tape:

(3): REP (Repeat)

(5): BL SKIP (Blank Skip)

(6): ATA (Automatic Tuner Activation)

Radio:

Storing the desired station on each number

button.

CD (MP3 files)/MD:

(1): DISC –

(2): DISC +

(3): REP (Repeat)

(4): SHUF (Shuffle)

MP3 files:

(5): ALBM –

(6): ALBM +

p PTY/MTL (programme type/Metal)

button 9, 14

q TA button 12, 13

r DSPL (display mode change) button

s OFF (Stop/Power off) button*

* Warning when installing in a car without

an ACC (accessory) position on the

ignition switch

After turning off the ignition, be sure to press

(OFF) on the unit for 2 seconds to turn off

the clock display.

Otherwise, the clock display does not turn off

and this causes battery drain.

XR-CA430X/CA440

SOURCE

ATT

VOL

AF SENS

BTM

DISC

REP

SHUF BL

SKIP/ ALBM

-

+

/ATA

MTL

–

+

MODE

SEL

RELEASE

123456

D-BASS

SEEK

AMS

TAPTY

MBP

OFFDSPL

5

Precautions

• If your car was parked in direct sunlight, allow

the unit to cool off before operating it.

• If no power is being supplied to the unit, check

the connections first. If everything is in order,

check the fuse.

• If no sound comes from the speakers of a two-

speaker system, set the fader control to the

centre position.

• When a tape is played back for a long period,

the cassette may become warm because of the

built-in power amplifier. However, this is not a

sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in this

manual, please consult your nearest Sony dealer.

To maintain high quality sound

Be careful not to splash juice or other soft drinks

onto the unit or tapes.

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while playing

the cassette. The cassette player head should be

cleaned after each 50 hours of use.

The use of cassettes longer than 90 minutes

is not recommended except for long

continuous play

The tape used for these cassettes is very thin and

tends to stretch easily.

Frequent playing and stopping of these tapes

may cause them to become entangled in the

cassette deck mechanism.

Slack

6

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset the

unit.

Remove the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

If you connect an optional amplifier and do not

use the built-in amplifier, the beep sound will be

deactivated.

1 Press (OFF)*.

Tape playback or radio reception stops (the

key illumination and display remain on).

* If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it from

the unit.

• If you detach the panel while the unit is still turned

on, the power will turn off automatically to prevent

the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

RESET button

(OFF)

(RELEASE)

7

Attaching the front panel

Attach part A of the front panel to part B of the

unit as illustrated and push the left side into

position until it clicks.

Notes

• Be sure not to attach the front panel upside down.

• Do not press the front panel too hard against the unit

when attaching it.

• Do not press too hard or put excessive pressure on

the display window of the front panel.

• Do not expose the front panel to direct sunlight or

heat sources such as hot air ducts, and do not leave

it in a humid place. Never leave it on the dashboard

of a car parked in direct sunlight or where there may

be a considerable rise in temperature.

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press ( D SPL) for two seconds.

The hour indication flashes.

1 Press either side of (VOL) to set the

hour.

2 Press (SEL).

The minute indication flashes.

3 Press either side of (VOL) to set the

minute.

2 Press ( D SPL).

The clock starts.

After the clock setting is completed, the

display returns to normal play mode.

Tip

You can set the clock automatically with the RDS

feature (page 14).

A

B

VOL

to go forward

to go back

VOL

to go forward

to go back

8

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

If a cassette is already inserted, to start playback,

press (SOURCE) repeatedly until “TAPE”

appears.

Fast-winding the tape

During playback, press and hold either

side of (SEEK/AMS).

To start playback during fast-forwarding or

rewinding, press (MODE) (o).

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each

track you want to skip.

You can skip up to nine tracks at one time.

Note

The AMS function may not work when:

– the blanks between tracks are shorter than four

seconds.

– there is noise between tracks.

– there are long sections of low volume or quiet

sections.

To Press

Stop playback (OFF)

Eject the cassette Z

The side facing up is played

The side facing down is played

SEEK

AMS

Fast-forward

Rewind

SEEK

AMS

To locate succeeding tracks

To locate preceding tracks

9

Playing a tape in various

functions

You can play the tape in various functions:

• REP (Repeat Play) repeats the current track.

• BL SKIP (Blank Skip) skips blanks longer than

8 seconds.

• ATA (Automatic Tuner Activation) turns on the

tuner automatically when fast-winding the tape.

• MTL (Metal) lets you play a metal or CrO2

tape.

During tape playback, press the

desired function button repeatedly

until “ON” in the display appears.

Function buttons

(3): REP

(5): BL SKIP

(6): ATA

(PTY): MTL

Example: ATA function

ATA function starts.

To return to normal playback function, select

“OFF.”

Radio

The unit can store up to 6 stations per band

(FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use Best

Tuning Memory to prevent accidents.

Storing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals within the selected band, and stores them

in the order of their frequency.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press ( SEN S) (BTM) for 2 seconds.

A beep sounds when the setting is stored.

Notes

• If only a few stations can be received due to weak

signals, some number buttons will retain their former

settings.

• When a number is indicated in the display, the unit

starts storing stations from the one currently

displayed.

AF SENS

BTM

DISC

REP MTL

–

+

123456

TAPTY

SHUF BL

SKIP/ ALBM

-

+

/ATA

10

Storing only the desired

stations

You can manually preset the desired stations on

any chosen number button.

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to

tune in the station that you want to

store.

4 Press the desired number button ((1)

to (6)) for 2 seconds until “MEM”

appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be erased.

Receiving the stored stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6))

on which the desired station is stored.

If preset tuning does not work

— Automatic tuning/Local Seek Mode

Automatic tuning:

Press either side of (SEEK/AMS) to

search for the station (automatic

tuning).

Scanning stops when the unit receives a

station. Repeat until the desired station is

received.

Local Seek Mode:

If the automatic tuning stops too

frequently, press (SENS) repeatedly

until “LOCAL-ON” appears.

Only the stations with relatively strong

signals will be tuned in.

To cancel the local seek mode, select “LOCAL-

OFF.”

Tip

If you know the frequency of the station you want to

listen to, press and hold either side of (SEEK/AMS) to

locate the approximate frequency, then press

(SEEK/AMS) repeatedly to fine adjust to the desired

frequency (manual tuning).

If FM stereo reception is poor

— Monaural Mode

During radio reception, press ( SEN S)

repeatedly until “MONO-ON” appears.

The sound improves, but becomes monaural

(“ST” disappears).

To return to normal mode, select “MONO-OFF.”

“LCL” indicator is displayed

“MONO” indicator is displayed

11

RDS

Overview of RDS

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio programme signal. For

example, one of the following will be displayed

upon receiving a station with RDS capability.

RDS services

RDS data offers you other conveniences, such as:

• Automatic retuning of a programme, helpful

during long-distance drives. — AF t page 11

• Receiving traffic announcements, even

when enjoying another programme/source. —

TA t page 12

• Selecting stations by the type of programme

it broadcasts. — PTY t page 13

• Automatic clock time setting. — CT t page

14

Notes

• Depending on the country or region, not all of the

RDS functions are available.

• RDS may not work properly if the signal strength is

weak or if the station you are tuned to is not

transmitting RDS data.

Automatic retuning for best

reception results

— AF (Alternative Frequencies)

The AF function allows the radio to always tune

into the area’s strongest signal for the station you

are listening to.

1 Select an FM station (page 9).

2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

frequency with a stronger signal in the same

network.

If “NO AF” flashes, the currently tuned into

station does not have an alternative frequency.

Note

When there is no alternative frequency in the area or

when you do not need to search for one, turn the AF

function off by selecting “AF-OFF.”

Changing the display item

Each time you press (AF), the item changes as

follows:

AF-ON y AF-OFF

To Press

Switch display

item

(DSPL)

Displayable items

• Music source

•Function

Displayable items

• Station name (frequency)

•Clock

continue to next page t

Frequencies change automatically.

98.5 MHz

Station

102.5 MHz

96.0 MHz

12

For stations without alternative

frequencies

Press either side of (SEEK) while the

station name is flashing (within 8

seconds).

The unit starts searching for another

frequency with the same PI (Programme

Identification) data (“PI SEEK” appears).

If the unit cannot find the same PI, the unit

returns to the previously selected frequency.

Staying with one regional programme

When AF function is on: this unit’s factory-set

setting restricts reception to a specific region, so

you won’t be switched to another regional station

with a stronger frequency.

If you leave this regional programme’s reception

area or would like to take advantage of the whole

AF function, select “REG-OFF.”

During radio reception, press (AF) for

two seconds until “REG-OFF”

appears.

Selecting “REG-OFF” might cause the unit to

switch to another regional station within the

same network.

To return to regional on, select “REG-ON.”

Note

This function does not work in the United Kingdom

and in some other areas.

Changing the display item

Each time you press (AF) for two seconds, the

item changes as follows:

REG-ON y REG-OFF

Local Link function

(United Kingdom only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 Press a number button ((1) to (6))

that has a local station stored on it.

2 Within 5 seconds, press the number

button of the local station again.

3 Repeat this procedure until the

desired local station is received.

Receiving traffic

announcements

— TA (Traffic Announcement)/TP (Traffic

Programme)

By activating TA and TP, you can automatically

tune in an FM station broadcasting traffic

announcements. These settings function

regardless of the current FM programme/source,

CD/MD; the unit switches back to the original

source when the bulletin is over.

Press (TA) repeatedly until “TA-ON”

appears.

The unit starts searching for traffic

information stations.

“TP” indicates reception of such stations, and

“TA” flashes during an actual traffic

announcement. The unit will continue

searching for stations available with TP if

“NO TP” is indicated.

To cancel all traffic announcements, select “TA-

OFF.”

Tip

You can also cancel the current announcement by

pressing (SOURCE) or (MODE).

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so you won’t miss hearing them.

1 Press either side of (VOL) to adjust

the desired volume level.

2 Press (TA) for 2 seconds.

“TA” appears and the setting is stored.

Receiving emergency announcements

If either AF or TA is on, the unit will switch to

emergency announcements, if one comes in

while listening to an FM station, a tape, or

optional CD/MD.

To Press

Cancel current

announcement

(TA)

13

Presetting RDS stations with

AF and TA setting

When you preset RDS stations, the unit stores

each station’s AF/TA setting (on/off) as well as

its frequency. You can select a different setting

(for AF, TA, or both) for individual preset

stations, or the same setting for all preset

stations. If you preset stations with “AF-ON” the

unit automatically stores stations with the

strongest radio signal.

Presetting the same setting for all

preset stations

1 Press (SOURCE) repeatedly to select

the radio.

2 Press (MODE) repeatedly to select an

FM band.

3 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

Note that selecting “AF-OFF” and “TA-OFF”

applies to non-RDS stations as well as RDS

stations.

4 Press (SENS) (BTM) until “BTM”

flashes.

Presetting different settings for each

preset station

1 Select an FM band, and tune in the

desired station (page 10).

2 Press (AF) and/or (TA) to select “AF-

ON” and/or “TA-ON.”

3 Press the desired number button ((1)

to (6)) until “MEM” appears.

Repeat from step 1 to preset other stations.

Tuning in stations by

programme type

— PTY (Programme types)

You can tune in a station by selecting the type of

programme you would like to listen to.

Note

You cannot use this function in some countries where

no PTY (Programme Type selection) data is available.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VA RIE D

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

continue to next page t

14

1 Press (PTY) during FM reception.

The current programme type name appears if

the station is transmitting the PTY data.

“- - - - - - - -” appears if the received station is

not an RDS station, or if the RDS data is not

received.

2 Press (PTY) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the table.

“NONE” appears if the programme type is

not specified in the RDS data.

3 Press either side of (SEEK/AMS).

The unit starts searching for a station

broadcasting the selected programme type.

Setting the clock

automatically

— CT (Clock Time)

The CT data from the RDS transmission sets the

clock automatically.

During radio reception, press ( SEL )

and (2) simultaneously

The clock is set.

After one second, the display goes back to the

normal playback mode.

To select “CT-OFF”, press (SEL) and (2)

simultaneously again.

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

15

Other Functions

XR-CA440 only

You can also control the unit (and optional CD/

MD units) with a rotary commander

(optional).

Using the rotary commander

(XR-CA440 only)

First, attach the appropriate label depending on

how you want to mount the rotary commander.

The rotary commander works by pressing

buttons and/or rotating controls.

By pressing buttons

By rotating the control

Rotate and release to:

– Locate the beginning of tracks on the tape.

– Tune in stations automatically.

– Skip tracks on the disc.*

1

Rotate, hold, and release to:

– Fast-wind the tape.

– Find a station manually.

– Fast-forward/reverse a track.*

1

Tip

To start playback while fast-winding the tape, press

(MODE).

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change discs during CD (MD) playback*

1

.

During playback of a CD containing MP3 files*

3

Push in and repeat rotating quickly to:

– Change discs one by one.

Push in, then rotate and hold to:

– Change albums.

*1 Only if the corresponding optional equipment is

connected.

*2 If your car has no ACC (accessory) position on the

ignition key switch, be sure to press (OFF) for 2

seconds to turn off the clock indication after turning

off the ignition.

*3 Available only when optional CD unit with the MP3

file control function is connected.

Press To

(SOURCE)

Change source

(radio/CD*

1

/MD*

1

/tape)

(MODE)

Change operation

(radio band/CD unit*

1

/MD

unit*

1

/tape playback

direction)

(ATT) Attenuate sound

(OFF)*

2

Stop playback or radio

reception

(SEL) Adjust and select

(DSPL) Change the display item

SEL

DSPL

MODE

SEL

DSPL

MODE

OFF

Rotate the VOL control

to adjust the volume.

(SOURCE)

(SEL)

(ATT)

(MODE)

(DSPL)

(OFF)

continue to next page t

SEEK/AMS

control

PRESET/

DISC control

16

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

Press (SEL) for 2 seconds while

pushing the VOL control.

Tip

You can also change the operative direction of these

controls with the unit (see “Changing the sound and

display settings” on page 17).

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

1 Select the item you want to adjust by

pressing (SEL) repeatedly.

Each time you press (SEL), the item changes

as follows:

BAS (bass) t TRE (treble) t BAL (left-

right)

t FAD (front-rear)

2 Adjust the selected item by pressing

either side of (VOL).

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the

sound

Press (ATT).

After “ATT-ON” momentarily appears, the

“ATT” appears in the display.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

To increase

To decrease

17

Changing the sound and

display settings

— Menu

The following items can be set:

SET (Set Up)

• CLOCK (page 7)

• CT (Clock Time) (page 14)

• A.SCRL (Auto Scroll)* (page 19).

• M.DSPL (Motion Display)

– the demonstration mode which appears when

the tape is ejected and no source is selected

(e.g., tuner is turned off).

• BEEP — to turn the beeps on or off.

Selecting the desired item

Press (SEL) and the desired preset

number button simultaneously.

(SEL) + (2): CT

(SEL) + (3): A.SCRL*

(SEL) + (4): M.DSPL

(SEL) + (6): BEEP

* When no CD or MD is playing, this item will not

appear.

After the mode setting completed, the display

returns to normal play mode.

Note

The displayed item will differ depending on the source.

To cancel the item, press (SEL) and the preset

number button simultaneously again.

Selecting the sound position

— My Best sound Position (MBP)

When you drive without passengers, you can

enjoy the most comfortable sound environment

with “My Best sound Position.”

“My Best sound Position” has two presets, which

are best suited for the front seats. You can select

one very easily with the MBP button.

MBP-A: best suited for the person in the front-

left seat.

MBP-B: best suited for the person in the front-

right seat.

Press (MBP) repeatedly for the desired

listening position.

After 1 second, the display goes back to the

normal playback mode.

To cancel the MBP function, select “MBP-OFF.”

If you want to adjust the sound characteristics

more precisely, you can do it using the (SEL)

button (see “Adjusting the sound characteristics”

on page 16).

Notes

• If you adjust any sound characteristics by using the

(SEL) button (page 16), the MBP setting returns to

OFF.

• When MBP is set to OFF, the sound setting you

adjusted (page 16) is activated.

18

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass sound.

The D-bass function boosts the low frequency

signal and high frequency signal with a sharper

curve than conventional bass boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasize and adjust the bass sound easily

with the D-BASS button.

Adjusting the bass curve

Press (D-BASS) repeatedly to select

the desired bass curve.

As the D-BASS number increases so does the

effect.

D.BASS-1 t D.BASS-2 t D.BASS-3 t

D.BASS-OFF

Note

The bass sound may distort at same volume. If the

bass sound distorts, select less effective bass curve.

CD/MD Unit (optional)

This unit can control external CD/MD units

(optional).

If you connect an optional CD unit with the CD

TEXT function, the CD TEXT information will

appear in the display when you play a CD TEXT

disc.

If you connect MP3 playable CD units (e.g. MP3

CD changer), you can play MP3 files;

compressed audio files with quality of sound.

See “MP3 playable CD Unit (optional)” on page

20.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select

“CD” or “MD (MS*).”

2 Press (MODE) repeatedly until the

desired unit appears.

CD/MD playback starts.

* MS: MG Memory Stick System-up Player MGS-X1

Cautions when connecting MGS-X1 and MD unit(s)

This unit recognizes MGS-X1 as an MD unit.

• When you want to play MGS-X1, press (SOURCE) to

select “MS” or “MD.” If “MS” appears in the source

display, MGS-X1 starts to play. If “MD” appears in

the source display, press (MODE) to select “MS,” to

start playback.

• When you want to play an MD unit, press (SOURCE)

to select “MD” or “MS.” If your desired MD unit

appears in the source display, it starts to play. If “MS”

or another MD unit appears in the source display,

press (MODE) to select your desired MD unit, to

start playback.

0dB

D.BASS-3

D.BASS-2

D.BASS-1

D.BASS-3

D.BASS-2

D.BASS-1

Frequency (Hz)

Level

19

Display items

When the disc/track changes, any prerecorded

title*

1

of the new disc/track is automatically

displayed (if the Auto Scroll function is set to

“ON,” names exceeding 8 characters will be

scrolled).

Selecting “A.SCRL-ON”

During playback, press (SEL) and (3)

simultaneously.

After 2 seconds, the display goes back to the

normal playback mode.

To select “A.SCRL-OFF”, press (SEL) and (3)

simultaneously again.

*1 “NO NAME” indicates there is no prerecorded

name to display.

*2 Only for CD TEXT discs with the artist name.

Notes

• Some characters cannot be displayed.

• For some CD TEXT discs with very many

characters, information may not scroll.

• This unit cannot display the artist name for each

track of a CD TEXT disc.

Tip

When Auto scroll is set to OFF and the disc/track

name is changed, the disc/track name does not scroll.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each

track you want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

Switching to other discs

During playback, press (1) (DISC –) or

(2) (DISC +) button.

The desired disc in the current unit begins

playback.

(1) (DISC –): For preceding discs

(2) (DISC +): For succeeding discs

To Press

Switch display

item

(DSPL)

Displayable items

• Music source

•Function

Displayable items

•Clock

• Elapsed playback time

• Disc name*

1

/artist name*

2

•Track title*

2

Disc number

SEEK

AMS

To locate succeeding tracks

To locate preceding tracks

SEEK

AMS

To search forward

To search backward

Disc number

Track number

20

Playing tracks repeatedly

— Repeat Play

You can select:

• REP-TRACK — to repeat a track.

• REP-DISC* — to repeat a disc.

* Available only when one or more optional CD (MD)

units are connected.

During playback, press (3) (REP)

repeatedly until the desired setting

appears in the display.

Repeat Play starts.

To return to normal play mode, select “REP-

OFF.”

Playing tracks in random

order

— Shuffle Play

You can select:

•SHUF-DISC*

1

— to play the tracks on the

current disc in random order.

• SHUF-CHGR*

1

— to play the tracks in the

current optional CD (MD) unit in random

order.

• SHUF-ALL*

2

— to play all the tracks in all the

connected CD (MD) units in random order.

*1 Available only when one or more optional CD (MD)

units are connected.

*2 Available only when two or more optional CD (MD)

units are connected.

During playback, press (4) (SHUF)

repeatedly until the desired setting

appears in the display.

Shuffle Play starts.

To return to normal play mode, select “SHUF-

OFF.”

Note

“SHUF-ALL” will not shuffle tracks between CD units

and MD units.

MP3 playable CD Unit

(optional)

This unit can control external MP3 playable CD

units. If you connect optional MP3 playable CD

units, you can play a disc containing MP3 files.

Listening to an MP3 file

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly until the

appropriate indication for the MP3

playable CD unit (“CD1,” “CD2,” etc.)

appears.

Playback starts.

When the last file on the disc is over

The file number indication returns to “1,” and

playback restarts from the first file of the disc.

Notes

• If a disc with no MP3 files (tracks) is inserted, “CD”

appears in the disc type display to start playback but

there will be no sound.

• Before playing a track, this unit reads all track and

album information on the disc. Depending on the

track structure, it may take more than a minute

before play begins. During this time, “READ” is

displayed. Please wait for play to start automatically

when the reading is complete.

To Press

Stop playback (OFF)

Skip discs

–Disc selection

(1) (–)

(2) (+)

Skip albums

–album selection

(5) (–)

(6) (+)

Skip tracks

–Automatic

Music Sensor

(SEEK/AMS) (./>)

[once for each track]

Fast-forward/

reverse

–Manual Search

(SEEK/AMS) (m/M)

[hold to desired point]

La pagina sta caricando ...

Sony XR-CA430X Manuale del proprietario

Sony XR-CA430X Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti