DTS DELTA R FULL COLOR Manuale utente

Marca: DTS

Modello: DELTA R FULL COLOR

Tipo: Manuale utente

DELTA RDELTA R

User Manual Rel 1.1

www.bluelight.at

DELTA R

Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia

non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo

documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso

scritto della D.T.S .

DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di

design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei

prodotti o dei circuiti descritti.

The information contained in this publication has been carefully prepared and checked. However, no

responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,

photocopied or reproduced, in part or completely, without prior written consent from D.T.S.

D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products

without prior notice. D.T.S. assumes no responsibility for the use or application of the products or

circuits described herein.

Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand soin.

document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement, sans le

consentement préalable de .

se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou

de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou

sur l'application des produits ou des circuits décrits.

D.T.S

D.T.S.

Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y

controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.

Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado o

reproducido, total o parcialmente, sin previa autorizaciónescrita de

se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter

estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de

ningún tipo sobre la utilización o sobre la aplicació

n de los productos o de los circuitos descritos.

D.T.S.

www.bluelight.at

DELTA R

INDEX:

1- TECHNICAL FEATURES 4

2- IMPORTANT SAFETY INFORMATION 5

2.1 Fire prevention

2.2 Prevention of electric shock

2.3 Protection against direct light radiation

2.4 Safety

2.5 Level of protection against the penetration of solid and liquid matter

3- VOLTAGE AND FREQUENCY 6

4- INSTALLATION 6

4.1 Safety cable

4.2 Risk of fire

4.3 Ambient temperature

5- MAINS CONNECTION 7

5.1 Protection:

6- DMX SIGNAL CONNECTION 7

6.1 DMX Addresses

6.2 Selecting the DMX address

7- MOVEMENT 8

8- DISPLAY FUNCTIONS 9

9- OPENING UP THE PROJECTOR HOUSING 19

9.1 Arms

9.2 base

10- CHANGHING THE LENSES 20

11- PERIODIC CLEANING 21

12- PERIODIC CONTROLS

13- DMX PROTOCOL 22

www.bluelight.at

1- TECHNICAL FEATURES

40 RGB Full Color LEDs/ LED power 3W

Total luminous flux 2.800 Lumens

RGB color generation / 16 million colours

Colour temperature variable on a linear range (3.200°K÷5.500°K)

No infrared emission / no ultraviolet emission

LEDs average lifespan: 100.000 hours

Optical units can be interchanged by users (narrow / medium /wide)

Interface: OLED display + 4 buttons / infrared remote control

Control signals: USITT DMX 512 USITT serial digital signals

15 DMX channels

Independent operation (Master / Slave)

Programmable automated playback (7 days)

Movement on 3 axes (Pan 320° /Tilt1 130° / Tilt2 180°)

Safety-locking system

IP65 protection level

Professional HARTING / ILME sockets (IP65 protection rating)

Full range AC 90-270V, 50-60Hz power supply

Operating ambient temperature -10° / 40°

Weight: 20 Kg

ACCESSORIES

Lenses set narrow° (cod. 03.LK.008)

Lenses set medium° (cod. 03.LK.001)

Lenses set wide° (cod. 03.LK.002)

Flight case for 1 DELTA (cod. 0521C029)

Flight case for 2 DELTA (cod. 0521C030)

Safety wire (3mm x 60 cm), Ring spring catch (max. capacity load 60Kg) (Cod. 0521A010)

“C” Clamp GQUICK with “Fast Lock” connection ¼ turn (max. load 80Kg) (cod. 0521A014)

Dimensions (LxWxH)

projector 430 x 330 x 570 mm

Weight20 Kg (motorized version)

Packaging Dimensions (LxWxH)

870 x 410 x 530 mm

Weight 24 Kg (motorized version)

DELTA R

www.bluelight.at

2- IMPORTANT SAFETY INFORMATION

2.1 Fire prevention:

-Never locate the fixture on any flammable surface.

-Minimum distance from flammable materials: 1 m.

-Minimum distance from the closest illuminable surface: 1 m.

-Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if

there is any doubt.

-Connect the projector to mains power via a thermal magnetic circuit breaker.

2.2 Prevention of electric shock:

-High voltage is present inside the unit. Isolate the projector from the mains supply prior to performing

any function which involves touching the inside of the unit.

-The level of technology inherent in the DELTA R requires the assistance of specialised personnel for all

servicing.Please refer to an authorised DTS service centre.

-A good earth connection is essential for proper functioning of the projector.

Never connect the unit without proper earth connection.

-The fixture should be located in places with a good air ventilation.

2.3 Protection against direct light radiation:

-Never turn the unit on if any of the lenses or the glass lenses protection is damaged.

-Never look directly the leds when they are on.

2.4 Safety:

-The projector should always be installed with bolts, clamps and other tools that are capable of

supporting the weight of the unit.

-Always use a second safety chain to sustain the weight of the unit in case of the failure of the main

fixing point.

-The external surface of the unit, at various points, may exceed 80°C. Never handle the unit until it’s on.

-Never install the fixture in an enclosed area lacking sufficient air flow.

-The ambient temperature should not exceed 45°C.

2.5 Level of protection against the penetration of solid and liquid matter:

-The projector is classified as an ordinary appliance and its protection level against the penetration of

solid and liquid matter is IP 65.

DELTA R

www.bluelight.at

3- VOLTAGE AND FREQUENCY:

Delta R can operate at 90-270V, 50 or 60 Hz.

4- INSTALLATION:

4.1 Safety cable:

4.2 Risk of fire:

Each fixture produces heat and must be installed in a well-ventilated position. The minimum

recommended distance from flammable material is 1m. Minimum distance from the object being

illuminated is 30 cm.

Delta R may be either floor or ceiling mounted.

For floor mounting installations, the unit is supplied with four rubber mounting feet on the base.

For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the

mounting surface.

The supporting structure from which the unit is hung should be capable of bearing the weight of the

unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to

move or shake whilst the Delta R is moving.

Four quarter turn fast locks placed on the base of the units,allows by using the two fast lock C clamps

provided in the box, to fix the unit in any position.

We recommend the use of a safety cable or chain connected to the Delta R and to the suspension truss

in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the iron

cable or chain can bear the weight of the entire unit.

You may attach the safety chain to the holes located on the base of the fixture, as shown in the picture

below.

DELTA R

SAFETY CABLE

FIXING POINT

www.bluelight.at

4.3 Ambient temperature:

The projector should never be installed in places that lack a constant air flow. The ambient temperature

should NOT exceed 45°C.

5- MAINS CONNECTION:

Delta R can operate at 90-270V, 50 or 60Hz.

For connection purposes, ensure that your plug can handle at least 300W power consuption.

Strict adherence to regulatory norms is strongly

Recommended.

5.1 Protection:

The use of a thermal magnetic circuit breaker is recommended for each Delta R.

A good earth connection is essential for the correct operation of the projector.

6- DMX SIGNAL CONNECTION:

The unit operates using a digital DMX 512 (1990) signal. Connection between the control box and the

projector or between projectors must be carried out using a two pair screened ø0.5 mm cable and a

CANNON XLR 5 or 3 pole connector.

P.S:

If the display showing the DMX address flashes, then one of the following errors has occurred:

- DMX signal not present

- DMX reception problem

Ensure that the conductors do not touch each other.Do not connect the cable ground to the XLR chassy

The plug housing must be isolated. Connect the mixer signal to the DMX IN projector plug and connect

it to the next projector by connecting the DMX OUT plug on the first projector to the DMX IN plug of the

second one.

In this way, all the projectors are cascade connected.

4 2

1=GND

2=DATA-

3=DATA+

CONTROLLER

S T A N D A R D

DM X 5 1 2

OUT

DELTA R

Electronic ballast

90-270V 50 / 60Hz

OUT OUT

DMX IN

DMX OUT

FUSE: T 3,15A

MAINS

www.bluelight.at

DELTA R

6.1 DMX Addresses:

DELTA R have 15 DMX control channels.

Here below are described the DMX channels addressing for the controller:

Projector 1 A001

Projector 2 A016 If you want to select the next projector, just add “15”

Projector 3 A031

….. A….

projector 6 A091

6.2 Selelcting the DMX address:

1) Press the UP-DOWN key until you reach the required DMX address. The numbers on the display will

start to flash (but the new DMX address hasn't yet been set).

2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the

projector is now controlled by the new DMX address.

TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get

a faster selection.

7- Movement

The projector has a maximum movement of 320° for Pan,180° for Tilt 1 and 135° for tilt 2

(7 mechanical steps 22,5° each).

DO NOT place any obstructions in the path of the projector's movement.

ENTER

DOWN

Tilt 2 mechanical regulation

TILT1 180°

PAN 320°

TILT2 135°

www.bluelight.at

8- DISPLAY FUNCTIONS

DISPLAY FUNCTIONS

The DELTA R display panel shows all the available functions . Using these functions, it is possible

to change some of the parameters and add some functions. Changing the DTS setting can vary the

functions of the unit so that it does not respond to the DMX 512 used to control it. Carefully

follow the instructions below before carrying out any variations or selections.

DELTA R

1)GLOBAL SETTING MENU

LANGUAGE

DEFAULT PAGE

SECURITY

DEFAULT SETTING

SET DATE

SET TIME

REMOTE CONTROL ID

UPDATE

ABOUT

2)MODE SETTING MENU

DMX MODE

MASTER MODE

SLAVE MODE

IR MODE

TEST MODE

TWILIGHT MODE

3)MOVING HEAD SETUP MENU

PAN MIN

PAN MAX

TILT MIN

TILT MAX

CALIBRATE PAN

CALIBRATE TILT

INVERT PAN

INVERT TILT

SWAP PAN & TILT

ENCODER

RESET PAN & TILT

SPEED PAN & TILT

4)LED SETUP MENU

COLOUR MODE

WHITE BALANCE

BOOST DRIVING

MIN RGB

MAX RGB

5)DIPLAY SETUP MENU

CONTRAST

DISPLAY FLIP

SCREEN SAVER SELECT

SCREEN SAVER ENABLE

6)MEASURE MENU

LIFE

DMX

VOLTAGE

TEMPERATURA

TWILIGHT

www.bluelight.at

DELTA R

1)GLOBAL SETTING MENU

LANGUAGE

DEFAULT PAGE

SECURITY

DEFAULT SETTING

SET DATE

SET TIME

REMOTE CONTROL ID

UPDATE

ABOUT

Up-Down

A001

GLOBAL SETTING

ENTER

Language

Up-Down

Up-DownENTER

Up-Down

LANGUAGE SELECTION

This menu allow to set the language

English = Default

Default Page

Up-Down

Up-DownENTER

Up-Down

DEFAULT PAGE SELECTION

This menu allow to set the

visualisation for the start up page

Four Digit = DMX address

visualisation

ENTER

Status = DMX / Color Mode / Boost

Power / Security

ENTER

Security

Up-Down

Up-DownENTER

SECURITY PASSWORD

This menu allow to select a security

password to lock the user’s settings

Default 0000 = no password

ENTER

Up-Down

Default Setting

Up-Down

DEFAULT SETTINGS

This menu allow to set the unit to

the company settings

Set Date

Up-Down

Up-DownENTER

25-12-06 Sunday

DATE SETTING

This menu allow to set the day of

the week the month and the year

ENTER

GAME,TIMER and WHITE SETTING

will not be changed

ENTER

Set Language

English

Italian

Set Default Page

Four Digit

Status

A001

Security Unlocked

Enter Security Code

0 0 0 0

Confirm Security Code

0 0 0 0

Set Default

Yes

Up-Down

ENTER

Up-Down

Set Date

Date setting for Stand Alone mode

www.bluelight.at

DELTA R

Remote control ID

Up-Down

ENTER

REMOTE CONTROL ID SETTING

This menu allow to set the ID of the

Remote control

ENTER

Update

Up-Down

Up-DownENTER

UPDATE MENU

This menu allow to upgrade the

uni’s software by computer or

remote control

ENTER

Update the unit’s software from PC by

using the Remote Control

Update the unit’s software from PC by

cable

Download

Up-Down

Up-DownENTER

DOWNLOAD MENU

This menu allow to save unit’s

programs into computer

ENTER

Download the unit’s program to PC by

using the Remote Control

Download the unit’s program to PC by

cable

ABOUT

Up-Down

ENTER

About DELTA R

Master PCB 0514L019

Loader Version 1.00

HW Version 1.00

SW Version 1.00b14

Pan&Tilt PCB 0506312

PAn&Tilt Version 1.10

ABOUT MENU

This menu show informations about

unit’s hardware and software

Up-Down

ENTER

TIME SETTING

This menu allow to set the unit’s on

board clock for STAND ALONE

MODE

Set Time

Up-Down

Up-DownENTER

Real time internal clock setting

ENTER

Set Time

15-10-06

Set ID Remote Control

ID : 005

Remote control ID setting

Select UPDATE Mode

With REMOTE CONTROL

Direct to PC

Select DOWNLOAD Mode

With REMOTE CONTROL

Direct to PC

Unit’s Hardware and software infos

www.bluelight.at

DELTA R

2)MODE SETTING MENU

DMX MODE

MASTER MODE

SLAVE MODE

IR MODE

TEST MODE

TWILIGHT MODE

A001

MODE SETTINGS

Up-Down

ENTER

DMX Mode

Up-Down

Up-DownENTER

DMX ADDRESS SELECTION

This menu allow to set the unit’s

DMX address.

Master Mode

The MASTER unit send DMX signal to

the SLAVE units

ENTER

Up-Down

Up-DownENTER

MASTER MODE SETTING

This menu allow to set Delta R as

master unit.(No DMX must be

present on unit’s DMX input panel)

Slave Mode

ENTER

The SLAVE unit receive DMX signal

from the MASTER unit

Up-Down

Up-DownENTER

SLAVE MODE SETTING

This menu allow to set the Delta R

as slave unit

Set Address DMX

001

Address range 001-489

ENTER

Set Master Mode

Yes

Set Slave Mode

Yes

IR Mode

ENTER

The unit is controlled by the infrared

remote control

Up-Down

Up-DownENTER

IR MODE SETTING

This menu allow to control the unit

with an infrared remote control

Up-Down

Set IR Mode

Yes

Test Mode

Yes

Test Mode

Preprogrammed test sequence

ENTER

Up-Down

Up-DownENTER

TEST MODE MENU

This menu allow to test all the

unit’s funtions

Up-Down

www.bluelight.at

DELTA R

TWILIGHT MODE

Up-Down

Up-DownENTER

TWILIGHT MODE MENU

This menu allow to set the Twilight

Level

ENTER

The unit is switched on and off at

the desired twilight value

3)MOVING HEAD SETUP MENU

PAN MIN

PAN MAX

TILT MIN

TILT MAX

CALIBRATE PAN

CALIBRATE TILT

INVERT PAN

INVERT TILT

SWAP PAN & TILT

ENCODER

RESET PAN & TILT

SPEED PAN & TILT

Up-Down

A001

MOVING HEAD SETUP

ENTER

Up-Down

Up-DownENTER

PAN MINIMUM POSITION

This menu allow to set the Pan

minimum position (Default =000)

Pan Max

Up-Down

Up-DownENTER

PAN MAXIMUM POSITION

This menu allow to set Pan

maximum position (Default = 255)

Pan Min

Up-Down

Up-DownENTER

TILT MINIMUM POSITION

This menu allow to set the Tilt

minimum position in degrees

(Default =000)

Tilt Min

Set Twilight Level

001

Setting Pan Min

Pan Min : 000

Range 000-255

Default = 000

ENTER

Setting Pan Max

Pan Man : 000

Range 255-000

Default = 255

ENTER

Setting Tilt Min

Tilt Min : 000

Range 000-255

Default = 000

ENTER

www.bluelight.at

DELTA R

Calibrate Pan

Up-Down

Up-DownENTER

PAN CALIBRATION

This menu allow to calibrate Pan

home position (Default = 105)

Calibrate Tilt

Up-Down

Up-DownENTER

TILT CALIBRATION

This menu allow to calibrate Tilt

home position (Default = 128)

Invert Pan

Up-Down

Up-DownENTER

PAN INVERTION

This menu allow to set the Pan

movement.

Normal or Inverted

Invert Tilt

Up-Down

Up-DownENTER

TILT INVERTION

This menu allow to set the Tilt

movement.

Normal or Inverted

Swap Pan&Tilt

Up-Down

Up-DownENTER

PAN&TILT SWAP

This menu allow to invert the

control of Pan with the control of

Tilt.

IMPORTANT: (During PAN/TILT MIN,PAN/TILT MAX and PAN/TILT CALIBRATE setting,PAN/TILT INVERT and PAN/TILT SWAP are disabled

Encoder

Tilt Max

Setting Tilt Max

Tilt Max : 000

Range 000-255

ENTER

Up-Down

Up-DownENTER

TILT MAXIMUM POSITION

This menu allow to set the Tilt

maximum position (Default = 255)

Calibrating Pan

Pan : 105

Calibrating Tilt

Tilt : 105

Range 000-255

ENTER

Set PAN INVERTION

Pan : Normal

Actual Normal

Pan movement Normal or Inverted

Default = Normal

ENTER

Set TILT INVERTION

Tilt : Normal

Actual Normal

Tilt movement Normal or Inverted

Default = Normal

ENTER

Set Pan/Tilt SWAPPING

Swap : Normal

Actual Normal

Pan control inverted with Tilt control

and vice versa

Dfault = Normal

ENTER

Set Encoder Status

Encoder : Active

Actual Active

Pan/Tilt auto-repositioning system

enabled or disabled

Default = Active

ENTER

Up-Down

Up-DownENTER

ENCODER SETTING

This menu allow to enable/disable

the auto-repositioning function for

Pan and Tilt

Range 255-000

Default = 255

ENTER

www.bluelight.at

DELTA R

4)LED SETUP MENU

COLOUR MODE

WHITE BALANCE

BOOST DRIVING

MIN RGB

MAX RGB

Up-Down

A001

LED SETUP

ENTER

Set Colour Mode

RGB

CMYK

HSV

Actual RGB

Up-Down

Up-DownENTER

COLOUR MODE

This menu allow to select the

LED’S colour mode control system

between RGB, CMYK or HSV

Colour Mode

ENTER

RGB Mode (Default)

Ch7 = Dimmer / Ch8 = Red Ch9= Green

/ Ch10= BLue

CMYK Mode

Ch7 = Black / Ch8 = Cyan

Ch9= Magenta / Ch10= Yellow

HSV Mode

Ch7 = Nu / Ch8 = Hue

Ch9= Saturation / Ch10= Value

Setting WHITE

RED 255

GREEN 255

BLUE

Up-Down

Up-DownENTER

WHITE BALANCE

This menu allow to select the levels

for Red,Green and blue obtaining a

custom White

White balance

ENTER

255

Setting LED BOOST

BOOST Status

Active

Warning TEMPERATURE

PROTECTION ACTIVATED

Up-Down

ENTER

BOOST DRIVING

This menu allow to increase the

LED’s current from 350mA to 500

Boost Driving

ENTER

The Custom White can be

Recall by setting DMX channel 11

(WHITE) in the range 172-213

Whit BOOST active,the LED’s current is

setted to 500mA (30%more gain).

Default = Disable

NTC thermal protection active.

Resetting Pan & Tilt

PRESS ENTER

To RESET Pan & Tilt

PAN&TILT RESET

This menu allow to reset Pan and

Tilt Motors

Reset Pan & Tilt

Up-Down

ENTER

Pan &Tilt motors reset

ENTER

Set SPEED MAX P&T

Speed MAX % 100

PAN & TILT MAXIMUM SPEED

This menu allow to set the

maximum speed for Pan & Tilt

movement.

Speed Pan & Tilt

Up-Down

Up-DownENTER

Pan&Tilt maximum motor speed

Selectable between 25-100%

ENTER

www.bluelight.at

DELTA R

5)DIPLAY SETUP MENU

CONTRAST

DISPLAY FLIP

SCREEN SAVER SELECT

SCREEN SAVER ENABLE

Up-Down

A001

DISPLAY SETUP MENU

ENTER

Contrast 7

0 1 2 3 4 5 6 7 8 9

Up-Down

ENTER

DISPLAY CONTRAST

This menu allow to select display’s

contrast level.

Contrast

Flip Select

Up-Down

ENTER

DISPLAY FLIP

This menu allow to reverse display's

reading depending on the

mounting position

(On the ground or suspended).

Flip Display

Up-Down

ENTER

SCREEN SAVER SELECT

This menu allow to select between

different screen savers

Screen saver select

Setting RGB Max

Max RED : 000

Max GREEN: 000

Max BLUE

These settings have priority on Master

Dimmer (DMX channel 7)

RGB MAXIMUM VALUES

This menu allow to select the

maximum levels for Red,Green and

blue

: 000

Max RGB

ENTER

Up-Down

Up-DownENTER

Setting RGB Min

Min RED : 000

Min GREEN : 000

Min BLUE

These settings have priority on Master

Dimmer (DMX channel 7)

RGB MINIMUM VALUES

This menu allow to select the

minimum levels for Red,Green and

blue

: 000

Min RGB

ENTER

Up-Down

Up-DownENTER

Range = 0-9

ENTER

Default = On the ground

ENTER

Not yet implemented

ENTER

www.bluelight.at

DELTA R

6)MEASURE MENU

LIFE

DMX

VOLTAGE

TEMPERATURE

TWILIGHT

Up-Down

A001

MEASURE MENU

ENTER

Up-Down

ENTER

LIFE TIME

This menu show the total UNIT LIFE TIME

(reset not possible) and the RGB life

TIME (reset possible)

Life

Measure Life

Delta R Total LIFE

Days Hours Min Sec

ENTER

Total Unit Life Time

Reset not possible

ENTER

To resed Red life time,keep pushed

Enter button for more than 5

seconds

SCREEN SAVER ENABLE

This menu allow to enable the

selected screen saver.

Not yet implemented

Screen saver enable

ENTER

Up-Down

Up-DownENTER

ENTER

To resed Green life time,keep

pushed Enter button for more than

5 seconds

ENTER

To resed Blue life time,keep

pushed Enter button for more than

5 seconds

UP/DW Change Measure

1 19 47 55

Measure Life

Delta R RED LIFE

Days Hours Min Sec

UP/DW Change Measure

0 5 22 30

Measure Life

Delta R GREEN LIFE

Days Hours Min Sec

UP/DW Change Measure

0 4 37 15

Measure Life

Delta R BLUE LIFE

Days Hours Min Sec

UP/DW Change Measure

0 4 06 53

www.bluelight.at

Up-Down

Up-DownENTER

DMX

This menu show the DMX rate and

channels level

Dmx

DELTA R

Up-Down

Up-DownENTER

VOLTAGE

This menu show the different Voltage

levels inside the unit

Voltage

Measure TEMPERATURE

Celsius 20,5

Up-Down

Up-DownENTER

TEMPERATURE

This menu show the NTC sensor

temperature.

Temperature

ENTER

LED’s temperature monitor

Measure TWILIGHT

Value : 0314

Up-Down

Up-DownENTER

TWILIGHT

This menu show thetwilight level.

Twilight

ENTER

Light sensor Twilight level

(Located on the front of the unit)

Not yet implemented

ENTER

Not yet implemented

ENTER

Not yet implemented

ENTER

www.bluelight.at

DELTA R

9- OPENING UP THE PROJECTOR HOUSING:

It is possible to inspect the inside of the projector by removing the covers as shown below.

Attention: REMOVE MAINS POWER PRIOR TO ACCESSING THE PROJECTOR'S INTERNAL

COMPONENTS.

Proceed as per the pictures below

9.1- Arms

9.2- Base

Remove these two screws on both arm sides

Remove the 12 screws located on the base

www.bluelight.at

DELTA R

10- CHANGHING THE LENSES

To change the lenses set, proceed as per the pictures below

Optical Lenses set can be interchanged by users.

Three different models are available: (narrow / medium /wide)

Lenses set narrow (cod. 03.LK.008)

Lenses set medium (cod. 03.LK.001)

Lenses set wide (cod. 03.LK.002)

Remove these 12 screws on both

sides of the rear head assembly

Remove the top head cover

Remove these 8 screws and change

the panel

www.bluelight.at

La pagina sta caricando ...

DTS DELTA R FULL COLOR Manuale utente

Marca: DTS

Modello: DELTA R FULL COLOR

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: DTS DELTA R FULL COLOR User manual

DTS DELTA R FULL COLOR Manuale utente

DTS DELTA R FULL COLOR Manuale utente

in altre lingue

Documenti correlati