Motorola Sphere Guida Rapida

Sphere/Sphere+

Quick Start Guide

EN

MODELS:

SPHERE / SPHERE+

Frequency Band:

2.402 – 2.480 GHz

Maximum RF power:

6 dBm

Working temperature:

0°C~45°C

Product ID: SP003

Bluetooth ID:

D036169

FCC ID: VLJ-SP003

IC: 4522A-SP003

1. At a Glance

3

4

6

5

7

1

2

98

Mode (change between Bluetooth & Aux-in input)

1

2

3

4

5

6

7

8

9

Play/Pause

LED Indicator (Bluetooth)

Microphone

Volume Down/Last Track

Volume Up/Next Track

Charging Indicator (Headphones)

Aux-in Port

Power Port

Power switch

Aux-in

Status

Light

Charge

Play/

Pause

Volume

Up

Volume

Down

(micro USB)

MIC

2. Pairing

1

1.

Plug in power supply to the

speaker power port

2.

Speaker will enter into pairing

mode automatically with LED

ﬂashes blue and red.

3.

Pair your phone with the

speaker

4.

Select “Sphere” / “Sphere+”

from the list

2

1.

Take out the headphones

from the speaker dock

2.

The headphones will

enter into pairing mode

automatically with LED

ﬂashes blue and red.

3.

Pair your phone with the

headphone

4.

Select “Sphere Headphones”

/ “Sphere+ Headphones”

from the list

3

•

The pairing is now successful.

You may listen to the music

either from the speaker or the

headphones

3. Audio Transfer

You may enjoy seamless audio transfer when

you listen to music between the headphones

and speaker. Make sure your phone can

support simultaneously Bluetooth connection

with two Bluetooth devices by checking your

phone Bluetooth “paired list”. If both Speaker

and Headphones are shown “connected” from

the list, it means it is supported.

1



1.

Place the headphones to the speaker

2.

Music will stop playing from headphones and

it will be charged by the speaker. Make sure

the headphones is placed properly onto the

speaker dock, the LED will show orange when

it is successfully charging

3.

Speaker will automatically connect with the

phone*

4.

Press Play once, music will automatically play

from the speaker without the need of any

operation from your phone.

2



1.

Take out the headphones from the speaker

2.

Music will stop playing from the speaker

3.

The headphones will automatically connect

with the phone*

4.

Press Play once, music will automatically play

from the headphones without the need of any

operation from your phone.

* The reconnection time varies from phone to phone

4. Buttons Operation

Speaker & Headphones

Music

Play/Pause Press

Volume Down/Up Press - / +

Next Track Long Press +

Previous Track Long Press -

Calls

Answer/ end call Press

Reject a call

Long Press

Mute during call Long Press –

Re-dial last call Double press

Call waiting

Receive incoming call and

end ongoing call

Press

Receive incoming and on

hold ongoing call

Long Press

Pair

Enter pairing mode

(ﬁrst time)

Press

Enter pairing mode Long Press

Voice

To issue a voice command

during idle mode, then say

the command

Double Press +

5. LED Indicators

Speaker

Pairing Red-blue ﬂash

Standby Blue ﬂash

Charging (Headphones) Orange steady

Headphones

Pairing Red-blue ﬂash

Standby Blue ﬂash

Charging Red steady

Fully charged Blue steady

Battery low Red ﬂash

6. Power Consumption

Standby mode: 0.5W

O mode: 0.1W

General Information

If your product is not working properly, read

this Quick Start Guide or the User’s Guide of

one of the models listed on page 1.

Contact Customer Service:

+44 (0) 844 557 0890 (UK only - Calls cost

7p per minute plus your telephone company’s

access charge.) +44 (0) 8187 62092 (ROl)

Email: support@motorolahome.com

On the Web: www.motorolahome.com/support

Consumer Products and Accessories Limited

Warranty (“Warranty”)

Thank you for purchasing this Motorola

branded product manufactured under license

by Binatone

Electronics International LTD (“BINATONE”).

What Does this Warranty Cover?

Subject to the exclusions contained below,

BINATONE warrants that this Motorola branded

product (“Product”) or certiﬁed accessory

(“Accessory”) sold for use with this product

that it manufactured to be free from defects

in materials and workmanship under normal

consumer usage for the period outlined below.

This Warranty is your exclusive warranty and is

not transferable.

THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS, AND YOU MAY HAVE OTHER

RIGHTS THAT VARY BY STATE, PROVINCE

OR COUNTRY. FOR CONSUMERS WHO ARE

COVERED BY CONSUMER PROTECTION

LAWS OR REGULATIONS IN THEIR COUNTRY

OF PURCHASE OR, IF DIFFERENT, THEIR

COUNTRY OF RESIDENCE, THE BENEFITS

CONFERRED BY THIS LIMITED WARRANTY

ARE IN ADDITION TO ALL RIGHTS AND

REMEDIES CONVEYED BY SUCH CONSUMER

PROTECTION LAWS AND REGULATIONS. FOR

A FULL UNDERSTANDING OF YOUR RIGHTS

YOU SHOULD CONSULT THE LAWS OF YOUR

COUNTRY, PROVINCE OR STATE.

Who is covered?

This Warranty extends only to the ﬁrst

consumer purchaser, and is not transferable.

What will BINATONE do?

BINATONE or its authorised distributor at its

option and within a commercially reasonable

time, will at no charge repair or replace any

Products or Accessories that do not conform

to this Warranty. We may use functionally

equivalent reconditioned/ refurbished/ pre-

owned or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING

WITHOUT LIMITATION THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED TO THE DURATION OF

THIS LIMITED WARRANTY, OTHERWISE THE

REPAIR OR REPLACEMENT PROVIDED UNDER

THIS EXPRESS LIMITED WARRANTY IS THE

EXCLUSIVE REMEDY OF THE CONSUMER,

AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO

EVENT SHALL MOTOROLA OR BINATONE BE

LIABLE, WHETHER IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE) FOR DAMAGES

IN EXCESS OF THE PURCHASE PRICE OF

THE PRODUCT OR ACCESSORY, OR FOR

ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND,

OR LOSS OF REVENUE OR PROFITS, LOSS

OF BUSINESS, LOSS OF INFORMATION OR

OTHER FINANCIAL LOSS ARISING OUT OF

OR IN CONNECTION WITH THE ABILITY

OR INABILITY TO USE THE PRODUCTS OR

ACCESSORIES TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some jurisdictions do not allow the limitation

or exclusion of incidental or consequential

damages, or limitation on the length of an

implied warranty, so the above limitations or

exclusions may not apply to you.

Products Covered Length of Coverage

Consumer Products

One (1) year from the

date of the products

original purchase by the

ﬁrst consumer purchaser

of the product

.

Consumer

Accessories

Ninety (90) days

from

the date of the accessories

original purchase by the ﬁrst

consumer purchaser of the

product.

Consumer Products

and Accessories

that are Repaired or

Replaced

The balance of the

original warranty or

for Ninety (90) days

from the date returned to

the consumer, whichever

is longer.

Exclusions

Normal Wear and Tear. Periodic maintenance,

repair and replacement of parts due to normal

wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged

capacity falls below 80% of their rated capacity

and batteries that leak are covered by this

Warranty.

Abuse & Misuse. Defects or damage that

result from: (a) improper operation, storage,

misuse or abuse, accident or neglect, such

as physical damage (cracks, scratches, etc.)

to the surface of the product resulting from

misuse; (b) contact with liquid, water, rain,

extreme humidity or heavy perspiration,

sand, dirt or the like, extreme heat, or food;

(c) use of the Products or Accessories for

commercial purposes or subjecting the Product

or Accessory to abnormal usage or conditions;

or (d) other acts which are not the fault of

MOTOROLA or BINATONE, are excluded from

coverage.

Use of Non-Motorola branded Products and

Accessories. Defects or damage that result

from the use of Non-Motorola branded or

certiﬁed Products or Accessories or other

peripheral equipment are excluded from

coverage.

Unauthorised Service or Modiﬁcation.

Defects or damages resulting from service,

testing, adjustment, installation, maintenance,

alteration, or modiﬁcation in any way by

someone other than

MOTOROLA, BINATONE or its authorised

service centres, are excluded from coverage.

Altered Products. Products or Accessories with

(a) serial numbers or date tags that have been

removed, altered or obliterated; (b) broken

seals or that show evidence of tampering;

(c) mismatched board serial numbers; or (d)

nonconforming or non-Motorola branded

housings, or parts, are excluded from coverage.

Communication Services. Defects, damages,

or the failure of Products or Accessories due

to any communication service or signal you

may subscribe to or use with the Products or

Accessories is excluded from coverage.

How to Obtain Warranty Service or Other

Information?

To obtain service or information, please call:

+44 (0) 844 557 0890 +44 (0) 8187 62092

(ROl)

Email: support@motorolahome.com

On the Web: www.motorolahome.com/support

You will receive instructions on how to ship the

Products or Accessories at your expense and

risk, to a BINATONE Authorised Repair Centre.

To obtain service, you must include: (a) the

Product or Accessory; (b) the original proof

of purchase (receipt) which includes the date,

place and seller of the Product;(c) if a warranty

card was included in your box, a completed

warranty card showing the serial number

of the Product; (d) a written description

of the problem; and, most importantly;

(e) your address and telephone number.

These terms and conditions constitute the

complete warranty agreement between you

and BINATONE regarding the Products or

Accessories purchased by you, and supersede

any prior agreement or representations,

including representations made in any literature

publications or promotional materials issued

by BINATONE or representations made by any

agent, employee or sta of BINATONE, that

may have been made in connection with the

said purchase.

Disposal of the Device (environment)

At the end of the product life cycle,

you should not dispose of this

product with normal household

waste. Take this product to a

collection point for the recycling of

electrical and electronic equipment.

The symbol on the product, user’s

guide and/ or box indicates this.

Some of the product materials

can be re-used if you take them

to a recycling point. By reusing some parts or

raw materials from used products you make an

important contribution to the protection of the

environment.

Please contact your local authorities in case

you need more information on the collection

points in your area.

Dispose of the battery pack in an

environmentally-friendly manner according to

your local regulations.

European Union Directives Conformance

Statement

The following CE compliance information is

applicable to Motorola products that carry one

of the following CE marks:

Hereby, Binatone declares that this product is in

compliance with:

• The essential requirements and other relevant

provisions of Directive 2014/53/EU

• All other relevant EU Directives

• The Declaration of Conformity can be

obtained from the full user guide at www.

motorolahome.com

Manufactured by Binatone Electronics

International LTD, Floor 23A, 9 Des Voeux Road

West, Sheung Wan, Hong Kong

Imported by: Binatone Communications Europe,

Bosstraat 54/4, 3560 Lummen, Belgium

Manufactured, distributed, or sold by Binatone

Electronics International LTD., ocial licensee

for this product. MOTOROLA and the

Stylized M Logo are trademarks or registered

trademarks of Motorola Trademark Holdings,

LLC. and are used under license. Apple logo

is a trademark of Apple Inc., registered in

the U.S. and other countries. App Store is a

service mark of Apple Inc. Google Play and

Android are trademarks of Google Inc. All other

trademarks are the property of their respective

owners. ©2017Motorola Mobility LLC. All rights

reserved.

EN_EU Version 1.0

Printed in China

Sphere/Sphere+

Schnellstartanlei-

tung

DE

MODELLE:

SPHERE/SPHERE+

Frequenzbereich:

2,402 – 2,480 GHz

Maximale RF-Leistung:

6 dBm

Betriebstemperatur:

0°C~45°C

Produkt-ID: SP003

Bluetooth-ID:

D036169

FCC ID: VLJ-SP003

IC: 4522A-SP003

1. Auf einen Blick

3

4

6

5

7

1

2

98

Modus (Wechsel zwischen Bluetooth und Aux-in-

Eingang)

1

2

3

4

5

6

7

8

9

Wiedergabe/Pause

LED-Anzeige (Bluetooth)

Mikrofon

Leiser stellen/Vorheriger Titel

Lauter stellen/Nächster Titel

Ladeanzeige (Kopfhörer)

Aux-in-Anschluss

Netzanschluss

Ein-/Ausschalter

Aux-in

Status-

leuchte

Laden

Wiederga-

be/Pause

Lauter

Leiser

(Micro-USB)

MIKROFON

Modus (Wechsel zwischen Bluetooth und Aux-in-

Eingang)

1

2

3

4

5

6

7

8

9

Wiedergabe/Pause

LED-Anzeige (Bluetooth)

Mikrofon

Leiser stellen/Vorheriger Titel

Lauter stellen/Nächster Titel

Ladeanzeige (Kopfhörer)

Aux-in-Anschluss

Netzanschluss

Ein-/Ausschalter

Aux-in

Status-

leuchte

Laden

Wiederga-

be/Pause

Lauter

Leiser

(Micro-USB)

MIKROFON

2. Verbindungsherstellung

1

1.

Verbinden Sie das Netzkabel

mit dem Lautsprecher-

Netzanschluss.

2.

Der Lautsprecher wechselt

automatisch in den Pairing-

Modus und die LED blinkt

blau und rot.

3.

Verbinden Sie Ihr Smartphone

mit dem Lautsprecher.

4.

Wählen Sie „Sphere“/

„Sphere+“ in der Liste.

2

1.

Nehmen Sie den Kopfhörer

vom Dockinglautsprecher.

2.

Der Kopfhörer wechselt

automatisch in den Pairing-

Modus und die LED blinkt

blau und rot.

3.

Verbinden Sie Ihr Smartphone

mit dem Kopfhörer.

4.

Wählen Sie „Sphere

Headphones“/„Sphere+

Headphones“ in der Liste.

3

•

Die Verbindung ist nun

hergestellt. Sie können

entweder über den

Lautsprecher oder den

Kopfhörer Musik hören.

3. Audioübertragung

Sie können eine nahtlose Audioübertragung

zwischen dem Kopfhörer und dem

Lautsprecher genießen, wenn Sie Musik hören.

Stellen Sie sicher, dass Ihr Smartphone eine

Bluetooth-Verbindung mit zwei Bluetooth-

Geräten gleichzeitig unterstützen kann,

indem Sie die Bluetooth „Verbindungsliste“

Ihres Smartphones prüfen. Wenn sowohl der

Lautsprecher als auch der Kopfhörer in der

Liste als „verbunden“ angezeigt werden, wird

eine simultane Verbindung unterstützt.

1



1.

Legen Sie den Kopfhörer auf den Lautsprecher.

2.

Die Musikwiedergabe über den Kopfhörer

bricht ab und der Kopfhörer wird über den

Lautsprecher aufgeladen. Achten Sie darauf, den

Kopfhörer korrekt auf den Dockinglautsprecher

zu setzen. Wenn der Kopfhörer geladen wird,

leuchtet die LED orange.

3.

Der Lautsprecher verbindet sich automatisch

mit dem Smartphone*

4.

Drücken Sie einmal kurz die Wiedergabe-

Taste. Die Musik wird automatisch über den

Lautsprecher ausgegeben, ohne dass Sie eine

Taste an Ihrem Smartphone bedienen müssen.

2



1.

Nehmen Sie den Kopfhörer vom Lautsprecher.

2.

Die Musikwiedergabe über den Lautsprecher

bricht ab.

3.

Der Kopfhörer verbindet sich automatisch mit

dem Smartphone*

4.

Drücken Sie einmal kurz die Wiedergabe-

Taste. Die Musik wird automatisch über den

Kopfhörer ausgegeben, ohne dass Sie eine

Taste an Ihrem Smartphone bedienen müssen.

* Die Dauer der erneuten Verbindung variiert von

Smartphone zu Smartphone.

4. Bedientasten

Lautsprecher und Kopfhörer

Musik

Wiedergabe/Pause drücken

Leiser/Lauter stellen - / + drücken

Nächster Titel

+ länger gedrückt

halten

Vorheriger Titel

- länger gedrückt

halten

Telefonieren

Gespräch annehmen/beenden drücken

Anruf ablehnen

länger gedrückt

halten

Stummschalten während eines

Anrufs

– länger gedrückt

halten

Wahlwiederholung des letzten

Anrufs

zweimal drücken

Anklopfen

Eingehende Anrufe annehmen

und laufende Gespräche

beenden

drücken

Eingehende Anrufe annehmen

und laufende Gespräche in die

Warteschleife schalten

länger gedrückt

halten

Verbinden

Pairing-Modus aktivieren

(erstmalig)

drücken

Pairing-Modus aktivieren

länger gedrückt

halten

Sprachsteuerung nutzen

Um im Stand-by-Modus

einen Sprachbefehl zu geben,

sprechen Sie den Befehl

laut aus.

+ zweimal drücken

5. LED-Anzeigen

Lautsprecher

Verbindungsherstellung Blinkt rot und blau

Stand-by Blinkt blau

Lädt (Kopfhörer) Leuchtet stetig orange

Kopfhörer

Verbindungsherstellung Blinkt rot und blau

Stand-by Blinkt blau

Lädt Leuchtet stetig rot

Voll geladen Leuchtet stetig blau

Niedriger Akku-

Ladestand

Blinkt rot

6. Stromverbrauch

Stand-by-Modus: 0,5 W

Ausgeschaltet: 0,1 W

La pagina sta caricando ...

Motorola Sphere Guida Rapida

Questo manuale è adatto anche per

Motorola Sphere Guida Rapida

in altre lingue

Documenti correlati

Altri documenti