Panasonic TX40MS360E Istruzioni per l'uso

OPERATING INSTRUCTIONS / BEDIENUNGSANLEITUNG /

MODE D’EMPLOI / MANUAL DE FUNCIONAMIENTO /

ISTRUZIONI DI FUNZIONAMENTO / BRUGSANVISNING/

KÄYTTÖOHJE / DRIFTINSTRUKTIONER / BRUKSANVISNING

HANDLEIDING / INSTRUÇÕES DE UTILIZAÇÃO /

UŽIVATELSKÁ PŘÍRUČKA / INSTRUKCJE UŻYTKOWANIA /

HASZNÁLATI UTASÍTÁS / INSTRUCŢIUNI DE OPERARE /

ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ / ИНСТРУКЦИИ ЗА ЕКСПЛОАТАЦИЯ /

POUŽÍVATEĽSKÁ PRÍRUČKA

TX-40MS360E

LED TV / Téléviseur LED / Televisor LED / TV a LED

Led-tv / Televisor LED / LED televizor /

Telewizor LED / LED TV / Τηλεόραση LED /

LED телевизор / LED televízor

• You can nd instructions for your TV’s features in the E-Manual. To access the E-Manual, enter Settings menu, select Manuals and press OK. For quick access press

Home/Menu button and then Info button.

• Im E-Manuel können Sie Anweisungen über die Eigenschaften Ihres TV-Gerätes nden. Um auf die E-Manuel zuzugreifen, rufen Sie das Einstellungenmenü auf, wählen

Sie Anleitungen und drücken Sie OK. Für einen schnellen Zugri drücken Sie die Home/Menu-Taste und dann die Info-Taste.

• Vous pouvez accéder aux instructions relatives aux fonctions de votre téléviseur à partir du E-Manuel. Pour accéder au E-Manual, accédez au menu Réglages, sélectionnez

Manuels et appuyez sur OK. Pour un accès rapide, appuyez sur le bouton Home/Menu, puis sur le bouton Info.

• Puede encontrar instrucciones sobre las funciones de su televisor en el E-Manual. Para acceder al E-Manual o manual electrónico, ingrese al menú de Settings

Conguración, seleccione Manuales y presione OK. Para un acceso rápido, presione el botón Home/Menu y luego el botón Info.

• Sarà possibile trovare istruzioni per le caratteristiche della TV nel E-Manual (Manuale elettronico). Per accedere al E-Manual, aprire il menu Impostazioni, selezionare

Manuali e premere OK. Per un accesso rapido premere il pulsante Home/Menu e il pulsante Info.

• Du kan nde en vejledning til TV‘ets funktioner i E-Manualen. For at bruge E-Manualen, skal du indtaste menuen Indstillinger, vælge Manualer og trykke på OK. For

hurtig adgang til E-Manual skal du trykke på Home/Menu-knappen og derefter Info-knappen.

• Löydät TV:n käyttöohjeet E-oppaasta. E-oppaan käyttämiseksi, avaa Asetukset-valikko, valitse Oppaat ja paina OK. Avataksesi E-oppaan nopeasti, paina Home/

Menu-painiketta ja sitten Info-painiketta.

• Du kan hitta instruktionerna för Tv:ns funktioner i E-manualen. För att komma till E-manualen, gå in i inställningsmenyn, välj Manualer (Handböcker) och tryck på OK.

För snabb åtkomst, tryck på Home/Menu-knappen och sedan Info-knappen.

• Du kan nne anvisninger for TV-funksjonen i den E-Manual (elektroniske håndboken). For å få tilgang til den E-Manual (elektroniske håndboken), gå inn i Instllinger-

menyen, velg Bruksanvininger (Håndbøker) og trykk OK. For rask tilgan, trykk på Home/Menu-knappen og deretter Info-knappen.

•U vindt de instructies voor de functies van uw tv in de E-handleiding. Voor toegang tot de E-handleiding gaat u naar het menu Instellingen. Selecteer Handleidingen

en druk op OK. Voor snelle toegang drukt u op de knop Home/Menu en daarna op de knop Info.

• Encontra instruções para as funções da sua TV no E-Manual. Para aceder ao E-Manual, entrar no menu Conguração, selecionar Manuais e premir em OK. Para

acesso rápido premir o botão Home/Menu e depois o botão Info.

• V E-Manual (elektronické příručce) najdete pokyny pro funkce vašeho televizoru. Chcete-li použít E-Manual (elektronickou příručku), vstupte do nabídky Nastavení, zvolte

Návod (Manuál) a stiskněte OK. Pro rychlý přístup do elektronické příručky, stiskněte tlačítko Home/Menu a poté tlačítko Info.

• E-Manual (Instrukcję obsługi) dotyczącą możliwości Twojego TV możesz znaleźć w E-poradniku. Aby skorzystać z E-instrukcji, wejdź do Home/Menu Ustawieńia,

wybierz Instrukcję obsługi i naciśnij OK. Aby uzyskać szybki dostęp, naciśnij przycisk Menu, a następnie przycisk Info.

• A TV-készülék funkcióira vonatkozó használati utasításokat az E-kézikönyv tartalmazza. Az E-kézikönyv eléréséhez lépjen be a Beállítások menübe, válassza a

Kézikönyvek opciót, és nyomja meg az OK gombot. A gyors eléréshez nyomja meg a Home/Menu gombot, majd az Info gombot.

• În E-Manual (Manualul electronic) puteţi găsi instrucţiuni privind funcţiile televizorului dumneavoastră. Pentru a accesa E-Manual (Manualul electronic), accesați meniul

Setări, selectați Manuale și apăsați OK. Pentru acces rapid, apăsați butonul Home/Menu și apoi butonul Info.

• Στο Ηλ. E-Manual (εγχειρίδιο) μπορείτε να βρείτε οδηγίες σχετικά με τις λειτουργίες της τηλεόρασής σας. Για να αποκτήσετε πρόσβαση στο Ηλ. E-Manual (εγχειρίδιο),

εισέλθετε στο μενού Ρυθμίσεις, επιλέξτε Εγχειρίδια και πιέστε OK. Για γρήγορη πρόσβαση, πιέστε το πλήκτρο Home/Menu και κατόπιν το πλήκτρο Info.

• Можете да откриете инструкции за функциите на Вашия телевизор в електронното E-Manual (ръководство). За да получите достъп до електронното E-Manual

(ръководство), влезте в меню Настройки, изберете Ръководства и натиснете OK. За бърз достъп натиснете бутона Home/Menu и след това бутона Информация.

• V E-Manual (elektronickej príručke) nájdete pokyny pre funkcie vášho televízora. Pre prístup k E-Manual (elektronickej príručke) prejdite do ponuky Nastavenia,

vyberte Príručky a stlačte OK. Pre rýchly prístup stlačte tlačidlo Home/Menu a potom tlačidlo Info.

e-MANUAL

English - 1 -

Contents

Safety Information ................................................... 2

Markings on the Product.......................................... 2

Maintenance ............................................................ 4

Display panel, Cabinet, Pedestal............................. 4

Mains plug ............................................................... 4

Assembling / Removing the pedestal ...................... 4

When using the wall-hanging bracket...................... 5

Environmental Information....................................... 5

Features .................................................................. 5

Accessories Included............................................... 6

Standby Mode Picture ............................................. 6

Standby Notifications ............................................... 6

TV Control & Operation ........................................... 6

Using Main TV Menu ............................................... 7

Inserting the Batteries into the Remote ................... 8

Power Connection ................................................... 8

Antenna Connection ................................................ 9

Licence Notification ................................................. 9

Disposal of Old Equipment and Batteries ................ 9

Declaration of Conformity (DoC) ........................... 10

Specification .......................................................... 10

Notice .................................................................... 11

Remote Control ..................................................... 12

Connections........................................................... 13

Switching On/Off .................................................... 14

First Time Installation............................................. 14

Media Playback via USB Input .............................. 15

Media Browser....................................................... 15

Settings Menu Content .......................................... 17

General TV Operation ........................................... 24

Using the Channel List .......................................... 24

Configuring Parental Settings ................................ 24

Electronic Programme Guide ................................ 24

Teletext Services ................................................... 25

Software Upgrade.................................................. 25

Troubleshooting & Tips .......................................... 25

PC Input Typical Display Modes ............................ 26

AV and HDMI Signal Compatibility ........................ 26

Supported File Formats for USB Mode ................. 27

Video File Formats ................................................ 27

Picture File Formats .............................................. 27

Audio File Formats ................................................ 27

Subtitle File Formats.............................................. 28

Supported DVI Resolutions ................................... 28

Connectivity ........................................................... 29

Wired Connectivity................................................. 29

Wireless Connectivity ............................................ 29

Handling of the customer information .................... 30

Networked Standby Mode ..................................... 31

Connectivity Troubleshooting ................................ 31

Using Audio Video Sharing Network Service ......... 31

Apps ...................................................................... 32

Internet Browser .................................................... 32

HBBTV System...................................................... 33

Alexa Ready .......................................................... 33

Google Assistant.................................................... 35

DVB functionality information ................................ 35

English - 2 -

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the related

features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby

mode or switched off.

IMPORTANT - Please read these instructions

fully before installing or operating

WARNING: This device is intended to be used

by persons (including children) who are

capable / experienced of operating such a device

unsupervised, unless they have been given

supervision or instruction concerning the use of

the device by a person responsible for their safety.

• Use this TV set at an altitude of less than 5000 meters

above the sea level, in dry locations and in regions

with moderate or tropical climates.

• The TV set is intended for household and similar

indoor use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering

or blocking the ventilation openings with items, such

as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause fire or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands as

this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced, this

should only be done by qualified personnel.

• Do not expose the TV to dripping or splashing of

liquids and do not place objects filled with liquids,

such as vases, cups, etc. on or over the TV (e.g.,

on shelves above the unit).

• Do not expose the TV to direct sunlight or do not

place open flames such as lit candles on the top of

or near the TV.

• Do not place any heat sources such as electric

heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined

surfaces.

• To avoid danger of suffocation, keep plastic bags

out of the reach of the babies, children and domestic

animals.

• Carefully attach the stand to the TV. If the stand is

provided with screws, tighten the screws firmly to

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with

hazardous or flammable materials.

WARNING

• Batteries must not be exposed to excessive heat

such as sunshine, fire or the like.

• Excessive sound pressure from earphones or

headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially

children, push or hit the screen, push anything

into holes, slots or any other openings in the case.

Caution Serious injury or death risk

Risk of electric shock Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

i

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

CLASS 1

LASER PRODUCT

Class 1 Laser Product: This

product contains Class 1

laser source that is safe under

reasonably foreseeable

conditions of operation.

English - 3 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the pro-

duct may contain a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause severe

internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

– – – – – – – – – – – –

A television may fall, causing serious personal injury

or death. Many injuries, particularly to children, can be

avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting me-

thods recommended by the manufacturer of the

television set.

• ALWAYS use furniture that can safely support the

television set.

• ALWAYS ensure the television set is not overhanging

the edge of the supporting furniture.

• ALWAYS educate children about the dangers of

climbing on furniture to reach the television set or

its controls.

• ALWAYS route cords and cables connected to your

television so they cannot be tripped over, pulled or

grabbed.

• NEVER place a television set in an unstable location.

• NEVER place the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• NEVER place the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

• NEVER place items that might tempt children to

climb, such as toys and remote controls, on the top

of the television or furniture on which the television

is placed.

• The equipment is only suitable for mounting at



If the existing television set is going to be retained and

relocated, the same considerations as above should

be applied.

– – – – – – – – – – – –

Apparatus connected to the protective earthing of the

building installation through the MAINS connection or

through other apparatus with a connection to protective

earthing – and to a television distribution system using

coaxial cable, may in some circumstances create a fire

hazard. Connection to a television distribution system

has therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator)

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

• The wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• Use the specified wall mounting screws and other

accessories.

• Tighten the wall mounting screws firmly to prevent

the TV from fall. Do not over-tighten the screws.

WARNING

• Using other wall-hanging brackets, or installing

a wall-hanging bracket by yourself have the risk

of personal injury and product damage. In order

to maintain the unit’s performance and safety, be

absolutely sure to ask your dealer or a licensed

contractor to secure the wall-hanging brackets.

Any damage caused by installing without a

qualified installer will void your warranty.

• Carefully read the instructions accompanying

optional accessories, and be absolutely sure to

take steps to prevent the TV from falling off.

• Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.

• Take care when fixing wall brackets to the wall.

Always ensure that there are no electrical cables

or pipes in the wall before hanging bracket.

• To prevent fall and injury, remove the TV from

its fixed wall position when it is no longer in use.

Figures and illustrations in this user manual are

provided for reference only and may differ from the

actual product appearance. Product design and

specifications may be changed without notice.

English - 4 -

Assembling / Removing the pedestal

Preparations

Take out the pedestal(s) and the TV from the packing

case and put the TV onto a work table with the screen

panel down on the clean and soft cloth (blanket, etc.)

• Use a flat and firm table bigger than the TV.

• Do not hold the screen panel part.

• Make sure not to scratch or break the TV.

Assembling the pedestal

1. The stand of the TV consists of two pieces. Install

these pieces together.

2. Place the stand(s) on the stand mounting

pattern(s) on the rear side of the TV.

3. Insert the screws (M4 x 12) provided and tighten

them gently until the stand is properly fitted.

x4

Maintenance

  

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,

or pedestal by using a soft cloth to remove dirt or

fingerprints.

For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

3. Wring out the cloth firmly. (Please note, do not

let liquid enter the TV inside as it may lead to

product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile substances.

This may degrade surface quality or cause peeling

of the paint.

• The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap

or scratch the surface with your fingernail or other

hard objects.

• Do not allow the cabinet and pedestal to make

contact with a rubber or PVC substance for a long

time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular

intervals.

Moisture and dust may cause fire or electrical shock.

English - 5 -

setting) manually using Left or Right buttons on the

remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending

on the selected Mode in the Settings>Picture menu.

The Energy Saving settings can be found in the Set-

tings>Picture menu. Note that some picture settings

will be unavailable to be changed.

If pressed Right button or Left button consecutively,

“

Proceed and press

OK to turn the screen off immediately. If you don’t

press any button, the screen will be off in 15 seconds.

Press any button on the remote or on the TV to turn

the screen on again.

Note: Screen Off option is not available if the Mode is set

to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Back AV inputs for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours

• Sleep timer

• Child lock

• Automatic sound mute when no transmission

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

• Ethernet (LAN) for Internet connectivity and service

• 802.11 a/b/g/n built in WLAN Support

• Audio Video Sharing

• HbbTV

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way

when using the wall-hanging bracket or repacking

the TV.

• Put the TV onto a work table with the screen panel

down on the clean and soft cloth. Leave the stand(s)

protruding over the edge of the surface.

• Unsrew the screws that fixing the stand(s).

• Remove the stand(s).

When using the wall-hanging bracket

Please contact your local Panasonic dealer to

purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

a

b

a (mm) 100

b (mm) 100

View from the side

c

VESA

Bracket

d

(d) Depth of screw (c) min. 9 mm

max. 10 mm

Diameter M4

Note: The screws for fixing the TV onto the wall-hanging

bracket are not supplied with the TV.

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

Backlight to a fixed value set as Custom and adjust

the Backlight (located under the Energy Saving

English - 6 -

High Dynamic Range (HDR) / Hybrid Log-Gamma

(HLG)

Using this feature the TV can reproduce greater

dynamic range of luminosity by capturing and then

combining several different exposures. HDR/HLG

promises better picture quality thanks to brighter, more

realistic highlights, more realistic colour and other

improvements. It delivers the look that filmmakers

intended to achieve, showing the hidden areas of

dark shadows and sunlight with full clarity, colour and

detail. HDR/HLG contents are supported via native

and market applications, HDMI, USB inputs and over

DVB-S broadcasts.

Accessories Included

• Remote Control

• Batteries: 2 x AA

• Instruction Book

• Power Cord

• Detachable stand

• Stand mounting screws (M4 x 12)

Standby Mode Picture

You can use your TV as a digital picture frame using

the Standby Mode Picture feature. In order to do this

follow the steps below.

• Set the Standby Mode Picture option in the Set-

tings>System>More menu as On. This option is

set as Off by default.

• Create a separate folder named as standby_picture

in the USB storage device's root directory and copy

the files you want to use into that folder and then

connect the USB storage device to your TV.

• Press the Standby button on the remote briefly to

switch your TV into standby mode picture state.

Note that once the Standby Mode Picture option is

set as On, the function of the Standby button on the

remote will change. After this you will need to press

and hold the button to switch the TV into standby mode

while the TV is in normal operating mode.

If there are more than 1 picture file available in the

folder all picture files will be displayed as a slide show

in succession. If the necessary folder is not created

or there isn't any picture file in the folder, a warning

message will be displayed on the screen for a few

seconds and then disappear.

In standby mode picture state the backlight level of the

screen will be decreased by 50 % and Smart Center

features will not be usable, if Smart Center is available

for your TV model.

To switch your TV from standby mode picture state

back to normal operating mode press the Standby

button on the remote briefly.

Beside the remote control you can also use the control

unit on the TV to switch into standby mode picture

state and back to normal operating mode. In order to

do that follow the same instructions as described in the

TV Control & Operation section for switching the TV

into the standby mode. Note that you will not be able to

switch the TV into standby mode using the control unit

on the TV while the TV is in standby mode picture state.

Note: The availability of this feature depends on the TV model

and its features.

Refer to the Supported File Formats for USB Mode section

for the supported media file formats.

Standby Notifications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.” You can disable this functionality

by setting the Timer of No Signal option in the

Settings>Devices menu accordingly.

The Auto Power Down option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as Off

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-on

the TV, the following message will be displayed. “TV

switched to stand-by mode automatically because

no operation was made for a long time.” Before the

TV switches into standby mode a dialogue window will

be displayed. If you do not press any button the TV

will switch into the standby mode after a waiting period

of about 5 minutes. You can highlight Yes and press

OK to switch the TV into standby mode immediately.

If you highlight No and press OK, the TV will remain

on. You can also choose to cancel the Auto Power

Down function from this dialogue. Highlight Disable

and press OK, the TV will remain on and the function

will be cancelled. You can enable this function again by

changing the setting of the Auto Power Down option

from the Settings>System>More menu.

TV Control & Operation

P+

V+ V-

P-

English - 7 -

The joystick allows you to control the Volume /

Programme / Source and Turn Off - On functions of

the TV.

Note: The position of the joystick may differ depending on

the model.

To change volume: Increase the volume by pushing

the joystick right. Decrease the volume by pushing

the joystick left.

To change channel: Scroll through the stored

channels by pushing the joystick up or down.

To change source: Press the centre of the joystick

in, the sources list will appear on the screen. Scroll

through the available sources by pushing the joystick

up or down.

To turn the TV off (Hard Standby): Press the centre

of the joystick in and hold it down for more than 3

seconds, the TV will turn into hard standby mode.

In hard standby mode the remote control will not

function and the standby LED on the TV will not lit.

The functions such as networked standby mode (if

available) and timers will be disabled. You can turn on

the TV from the hard standby only via joystick.

To turn on the TV: Press the centre of the joystick in,

the TV will turn on.

Note: Main menu OSD cannot be displayed via control button.

Operation with the Remote Control

Press the Home button on your remote control to

display main menu. Use the directional buttons and

OK button to navigate and set. Press Return/Back

or Home button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Programme +/- and Volume +/- buttons

on the remote.

Reset and Power Off via Standby Button

Press and hold the Standby button to see additional

actions for this button. Reset (Restart), Standby (Nor-

mal Standby), and Power off (Forced Standby) options

will be available. Highlight one and press OK to perform

the selected action. If a problem occurs that prevents

the TV from switching into standby mode properly, you

can use the Power off option to force the TV to switch

into standby mode.

If your TV stops responding to commands and the

actions menu can not be displayed, the TV will be forced

to restart when the button is kept pressed for about 5

seconds. This will terminate the process.

Using Main TV Menu

When the Home button is pressed, the main TV menu

will appear on the screen. You can navigate through

the menu items using the directional buttons on the

remote. To select an item or see the sub-menu options

of the highlighted menu press OK button. When you

highlight a menu option some of the sub-menu items

of this menu may appear on the upper side of the

menu bar for quick access. To use a quick access item

highlight it, press OK and set as desired using the Left/

Right directional buttons. When finished press OK or

Back/Return button to exit.

You can also see information on location, weather,

time and date on the main TV menu screen. The green

small icons indicate the current status for time, network

and sync for apps. If these icons appear in green, it

means that the time information is updated, network

is connected and sync is completed in success.

Otherwise the icons will appear in white.

Press Exit button to close the main menu.

1. Home

When main menu is opened Home menu bar will be

highlighted. The content of the Home menu can be

s go to the TV menu,

highlight the Edit Home option and press OK. The

Home menu will switch to edit mode. In edit mode

you can delete or change the position of any item in

the Home menu. Highlight an option and press OK.

Select Delete or Move option and press OK. In order

to move a menu item use the Right, Left, Up and Down

direction buttons to select the position that you want

the item to move to and press OK.

You can also add options from other menus to Home

menu. Just highlight an option and press the Down

direction button on the remote. If you see Add to Home

option you can add it to the Home menu.

2. Search

You can search for Channels, Guide, TV menus,

Applications, Web, YouTube and Videos using this

option. Press OK and enter a key word using the virtual

keyboard. Then highlight OK and press OK to start

the search. Results will be displayed on the screen.

Highlight the desired result using the directional

buttons and press OK to open.

3. TV

3.1. Guide

You can access the electronic programme guide menu

using this option. Refer to Electronic Programme

Guide section for more information.

3.2. Channels

You can access the Channels menu using this option.

Refer to Using the Channel List section for more

information.

English - 8 -

3.3. Timers

You can set timers for future events using the options of

this menu. You can also review the previously created

timers under this menu.

To add a new timer select the Add Timer tab using the

Left/Right buttons and press OK. Set the sub-menu

options as desired and when finished press OK. A new

timer will be created.

To edit a previously created timer, highlight that timer,

select the Edit Selected Timer tab and press OK.

Change the sub-menu options as desired and press

OK to save your settings.

To cancel an already set timer, highlight that timer,

select Delete Selected Timer tab and press OK. A

confirmation message will be displayed. Highlight Yes

and press OK to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events

that will broadcasted in different channels at the same

time interval. In this case you will be asked to choose

one of these timers and cancel others. Highlight the

timer you want to cancel and press OK, Options menu

will be displayed. Then highlight Set/Cancel and press

OK to cancel that timer. You will have to save changes

after that. In order to do that press OK, highlight Save

Changes and press OK again.

3.4. More Apps

In order to manage the apps installed on your TV,

you can use this option. Highlight and press OK. You

can add an installed app to Home menu, launch or

remove it. Highlight an app and press OK to see the

available options.

3.5. Market

You can add new apps from the application market

using this option. Highlight and press OK. Available

apps will be displayed. You can also access the

application market from within the More Apps menu.

3.6. Accessibility

You can access the accessibility settings menu directly

using this option.

3.7. Privacy Settings

You can access the privacy settings menu directly

using this option. This option may not be available

depending on the model of your TV and the selected

country during the first time installation process.

4. Settings

You can manage the settings of your TV using the

options of this menu. Refer to Settings Menu Content

section for more information.

You can reset your customisations on the Home menu

to defaults using the Reset Apps option (availability

depends on TV model and its features). Highlight and

press OK. A confirmation message will be displayed.

Highlight Yes and press OK to proceed. Note that you

will not be able to perform this operation again within

the next few minutes.

5. Sources

You can manage your input source preferences using

the options of this menu. To change the current source

highlight one of the options and press OK.

5.1. Source Settings

You can access the source settings menu directly using





Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart-

ment. Insert two size AA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat

such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a

220-240V AC, 50 Hz supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains.

Plug one end (the two-hole plug) of the supplied

detachable power cord into the power cord inlet on

English - 9 -

the rear side of the TV as shown above. Then plug

the other end of the power cord into the mains socket

outlet.

Note: The position of the power cord inlet may differ depending

on the model.

Antenna Connection

Connect the aerial or cable TV plug to the aerial input

(ANT) socket or satellite plug to the satellite input (LNB)

socket located on the rear side of the TV.

Rear side of the TV

1

2

LNB

ANT

1. Satellite

2. Aerial or cable

If you want to connect a device to the TV, make

sure that both the TV and the device are turned off

before making any connection. After the connection

is done, you can turn on the units and use them.

Licence Notification

The terms HDMI, HDMI High-Definition Multimedia

Interface, HDMI trade dress and the HDMI Logos

are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc.

Manufactured under licence from Dolby Laboratories.

Dolby, Dolby Audio, and the double-D symbol

are trademarks of Dolby Laboratories Licensing

Corporation.

YouTube and the YouTube logo are trademarks of

Google Inc.

This product contains technology subject to certain

intellectual property rights of Microsoft. Use or

distribution of this technology outside of this product

is prohibited without the appropriate licence(s) from

Microsoft.

Content owners use Microsoft PlayReady™ content

access technology to protect their intellectual property,

including copyrighted content. This device uses

PlayReady technology to access PlayReady-protected

content and/or WMDRM-protected content. If the

device fails to properly enforce restrictions on content

usage, content owners may require Microsoft to revoke

the device’s ability to consume PlayReady-protected

content. Revocation should not affect unprotected

content or content protected by other content access

technologies. Content owners may require you to

upgrade PlayReady to access their content. If you

decline an upgrade, you will not be able to access

content that requires the upgrade.

The “CI Plus” Logo is a trademark of CI Plus LLP.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of

such technology outside of this product is prohibited

without a licence from Microsoft or an authorised

Microsoft subsidiary.

Disposal of Old Equipment and Batteries

Only for European Union and

countries with recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries must not

be mixed with general household waste.

For proper treatment, recovery and

recycling of old products and batteries,

please take them to applicable collection

points in accordance with your national

legislation.

By disposing of them correctly, you will

help to save valuable resouces and

   

on human health and the environment.

For more information about collection

and recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in

combination with a chemical symbol.

In this case it complies with the

requirement set by the Directive for the

chemical involved.

English - 10 -

Declaration of Conformity (DoC)

Hereby, Panasonic Marketing Europe GmbH, declares

that this TV is in compliance with the essential requi-

rements and other relevant provisions of the Directive

2014/53/EU.

If you want to get a copy of the original DoC of this TV,

please visit the following website:

http://www.ptc.panasonic.eu/compliance-documents

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Web Site: http://www.panasonic.com

Specification

TV Broadcasting PAL BG/I/DK

SECAM BG/DK

Receiving Channels VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Digital Reception





TV(DVB-T-C-S)

(DVB-T2, DVB-S2



Number of Preset

Channels 11 000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio A2 Stereo+Nicam Stereo

Headphone 3.5mm mini stereo jack

Audio Output Power

(WRMS.) (10% THD) 2 x 8 W

Power Consumption (W) 75 W

Networked Standby Mode

Power Consumption (W) < 2

Weight (kg) 7,5 Kg

TV Dimensions DxLxH

(with stand) (mm) 235 x 909 x 563

TV Dimensions DxLxH

(without stand) (mm) 87 x 909 x 522

 16/9 40”

Operation temperature

and operation humidity

0ºC up to 40ºC, 85%

humidity max

Wireless LAN Transmitter Specifications

Frequency Ranges Max Output Power

2400 - 2483,5 MHz (CH1-CH13) < 100 mW

5150 - 5250 MHz (CH36 - CH48) < 200 mW

5250 - 5350 MHz (CH52 - CH64) < 200 mW

5470 - 5725 MHz (CH100 -

CH140) < 200 mW

Country Restrictions

This device is intended for home and office use in

all EU countries (and other countries following the

relevant EU directive). The 5.15 - 5.35 GHz band is

restricted to indoor operations only in the EU countries.

Country Restriction

Bulgaria General authorization required for outdoor

use and public service

Italy

If used outside of its own premises, general

authorization is required. Public use is

subject to general authorisation by the

respective service provider

Greece In-door use only for 5470 MHz to 5725

MHz band

Luxembourg General authorization required for network

and service supply(not for spectrum)

Norway

Radio transmission is prohibited for the

geographical area within a radius of 20 km

from the centre of Ny-Ålesund

Russian

Federation In-door use only

Israel 5 GHz band only for 5180 MHz-5320

MHz range

The requirements for any country may change at

any time. It’s recommended that user checks with

local authorities for the current status of their national

regulations for 5 GHz wireless LAN’s.

Standard

IEEE 802.11.a/b/g/n

Host Interface

USB 2.0

Security

WEP 64/128, WPA, WPA2, TKIP, AES, WAPI

English - 11 -

Notice

DVB / Data broadcasting / IPTV functions

• This TV is designed to meet the standards (as of

March, 2021) of DVB-T / T2 (MPEG2, MPEG4-

AVC(H.264) and HEVC(H.265)) digital terrestrial

services, DVB-C (MPEG2, MPEG4-AVC(H.264)

and HEVC(H.265)) digital cable services and DVB-S

(MPEG2, MPEG4-AVC(H.264) and HEVC(H.265))

digital satellite services.

Consult your local dealer for availability of DVB-T /

T2 or DVB-S services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.

• This TV may not work correctly with the signal which

does not meet the standards of DVB-T / T2, DVB-C

or DVB-S.

• Not all the features are available depending on the

country, area, broadcaster, service provider, satellite

and network environment.

• Not all CI modules work properly with this TV. Consult

your service provider about the available CI module.

• This TV may not work correctly with CI module that

is not approved by the service provider.

• Additional fees may be charged depending on the

service provider.

• The compatibility with future services is not

guaranteed.

• Internet apps are provided by their respective service

providers, and may be changed, interrupted, or

discontinued at any time.

Panasonic assumes no responsibility and makes no

warranty for the availability or the continuity of the

services.

• Panasonic does not guarantee operation and

performance of peripheral devices made by other

manufacturers; and we disclaim any liability or

damage arising from operation and/or performance

from usage of such other maker's peripheral devices.

English - 12 -

Remote Control

EXIT

LANG.LANG.

E

M

O

H

BACK

G

1

2

1

3

4

5

21

6

10

7

9

8

11

12

13

14

15 16

17

18

19

20

22

23

24

25

1. Standby (*): Standby / On (press briefly)

Reset / Power Off (press and hold)

2. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

3. Guide: Displays the electronic programme guide

4. Home: Displays TV menu

5. Directional buttons: Helps navigate menus,

content etc. and displays the subpages in TXT

mode when pressed Right or Left

6. OK: Confirms user selections, holds the page (in

TXT mode), views Channels menu (DTV mode)

7. Exit: Closes and exits from displayed menus or

returns to previous screen

8. Coloured Buttons: Follow the on-screen instruc-

tions for coloured button functions

9. Volume +/-

10. Mute: Completely turns off the volume of the TV

11. Numeric buttons: Switches the channel, enters

a number or a letter in the text box on the screen,

switches the TV on when in standby mode

12. Language: Switches among sound modes (an-

alogue TV), displays and changes audio/subtitle

language and turns subtitles on or off (digital TV,

where available)

13. Rewind: Moves frames backwards in media such

as movies

14. Stop: Stops the media being played

15. Play: Starts to play selected media

16. Pause: Pauses the media being played

17. No function

18. Fast Forward: Moves frames forward in media

such as movies

19. Text: Displays teletext (where available), press

again to superimpose the teletext over a normal

broadcast picture (mix)

20. Programme +/-: Programme up-down, Page up-

down (in TXT mode), switches the TV on when in

standby mode

21. Back/Return: Returns to previous screen, previous

menu, opens index page (in TXT mode). Quickly

cycles between previous and current channels

or sources

22. My Button 2 (**)

23. Netflix: Launches the Netflix application

24. My Button 1 (**)

25. Source: Shows available broadcast and content

sources

(*) Standby Button

Press and hold the Standby button to see additional ac-

tions for this button. Highlight one of the Reset (Restart),

Standby (Normal Standby), and Power off (Forced

Standby) options and press OK to perform the selected

action. If your TV stops responding to commands and

the actions menu can not be displayed, the TV will be

forced to restart when the button is kept pressed for

about five seconds.

Press briefly and release the button to switch the

TV into standby mode or to switch it on when it’s in

standby mode.

(**) My Button 1 & My Button 2

These buttons may have default functions depending

on the model. However you can set a special function

to these buttons by pressing on them for more than

three seconds when on a desired source, channel or

application. A confirmation message will be displayed on

the screen. Now the selected My Button is associated

with the selected function.

Note that if you perform First Time Installation, My

Button 1&2 will return to their default function.

English - 13 -

Connections

Connector Type Cables Device

VGA

Connection

(back)

AUDIO IN PC/YPbPr

Audio

Connection

(back) YPbPr/PC Audio Cable

HDMI

Connection

(side&back)

SPDIF SPDIF

(Optical Out)

Connection

(back)

BACK AV Back AV

(Audio/Video)

Connection

(back) Audio Video Cable

HEADPHONE Headphone

Connection

(side)

YPBPR YPbPr Video

Connection

(back) PC to YPbPr Connection Cable

USB

Connection

(side)

CI

Connection

(side)

CAM

module

LAN Ethernet

Connection

(back) LAN / Ethernet Cable

See the illustrations on the left

side. You can use YPbPr to VGA

cable to enable YPbPr signal via

VGA input. You cannot use VGA

and YPbPr at the same time. To

enable PC/YPbPr audio, you will

need to use the back audio inputs

with a YPbPr/PC audio cable for

audio connection. When using

the wall mounting kit (available

from a third party in the market,

if not supplied), we recommend

that you plug all your cables into

the back of the TV before mounting

on the wall. Insert or remove the

CI module only when the TV is

SWITCHED OFF. You should refer

to the module instruction manual

for details of the settings. The/

Each USB input of your TV supports

devices up to 500mA. Connecting

devices that have current value

above 500mA may damage your TV.

When connecting equipment using a

HDMI cable to your TV, to guarantee

sufficient immunity against parasitic

frequency radiation, you have to use

a high speed shielded (high grade)

HDMI cable with ferrites.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 14 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the centre of the joystick on the TV in or push

it up/down.

To switch on the TV from hard standby

• Press the centre of the joystick on the TV in.

To switch the TV into standby

Press the Standby button on the remote control, the

TV will switch into standby mode.

To switch the TV into hard standby

Press the centre of the joystick on the TV in and hold it

down for more than 3 seconds, the TV will switch into

hard standby mode.

To switch off the TV

To power down the TV completely, unplug the power

cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby Mode

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

After the language selection, you will be asked whether

you want to change accessibility settings. Highlight

Yes and press OK to change. Refer to System Menu

Content section for detailed information on available

options.

Set your country preference on the next screen.

Depending on the Country selection you may be asked

to set and confirm a PIN at this point. The selected PIN

cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option in the next step.

This option will configure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed

on the screen as an info banner or the pre-installed

video file may be played back. This option is intended

only for store use. It is recommended to select Home

Mode for home use. This option will be available in

Settings>System>More menu and your preference

for this setting can be changed later. Make your

selection and press OK to continue.

The picture mode selection screen will then be

displayed. In order for your TV to consume less

energy and be more environmentally friendly select

Natural and press OK to continue. You can change

your selection later using the Mode option in the

Settings>Picture menu.

Depending on the model of your TV and the country

selection Privacy Settings menu may appear at

this point. Using this menu you can set your privacy

privileges. Highlight a feature and press OK to

enable or disable. Read the related explanations

displayed on the screen for each highlighted feature

before making any changes. You can press the Right

directional button to highlight the text and use the

Programme +/- or Up/Down directional buttons to

scroll up and down to read the entire text. You will

be able to change your preferences at any time

later from the Settings>System>Privacy>Privacy

Settings menu. If the Internet Connection option is

disabled Network/Internet Settings screen will be

skipped and not displayed. If you have any questions,

complaints or comments regarding this privacy

policy or its enforcement, please contact by email at

[email protected].

Highlight Next and press OK button on the remote

control to continue and the Network/Internet Settings

menu will be displayed. Please refer to Connectivity

section to configure a network connection. If you want

your TV to consume less power in standby mode, you

can disable the Networked Standby Mode option

by setting it as Off. After the settings are completed

highlight Next and press OK button to continue.

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

channel list. When finished, highlight Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight

it and press OK. The checkbox next to the selected

option will be checked. To turn the search option off

clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

English - 15 -

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

When finished, highlight Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should be

made. Antenna Type menu will be displayed first. You

can select Antenna Type as Direct, Single Satellite

Cable or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and Configure LNB options will be available. You

can change the transponder and LNB settings using

the related menu options.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

continue. Select an available satellite on the next

screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK to continue. Configure

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. Then

set the DiSEqC version and press OK to continue.

You can set up to four satellites (if available) for

version v1.0 and sixteen satellites for version v1.1

on the next screen. Press OK button to scan the first

satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Home button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to confirm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

After the first time installation is completed HD+

operator application screen may be displayed

depending on selections you made during the

installation process. In order to access operator

services this application needs to be activated. If

you activate the application, the elements of the user

interface such as channel info banner and electronic

programme guide, which are normally provided by the

TV, will be replaced by the operator application. If you

do not perform satellite or HD+ installation and want

to activate the application at a later time, highlight the

HD+ application on the Home menu and press OK.

You will be directed to a screen where you can carry

out the activation.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the files on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any file damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting.

Wait a little while before each plugging and unplugging

as the player may still be reading files. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a file.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image files the Media Browser menu

can only display 1000 image files stored on the connected

USB device.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV, the

Sources bar will be displayed with USBx highlighted.

Press OK, Media Browser menu will be displayed on

the screen. Select the file of your choice and press OK

to display or play it back. You can access the content

of the connected USB device any time later from the

Sources menu. You can also press the Source button

on the remote and then select your USB storage device

from the list of sources.

English - 16 -

You can set your media browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen while playing back a video or

an audio file or displaying a picture file. Press the

Info button if the information bar has disappeared,

highlight the gear wheel symbol positioned on the

right side of the information bar and press OK. Picture

Settings, Sound Settings, Media Browser Settings

and Options menus may be available depending on

the media file type and the model of your TV and its

features. The content of these menus may also differ

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate ,

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

Custom Boot Up Logo

You can personalize your TV and see your favourite

image or photo on the screen each time your TV boots

up. To do this, copy your favourite image files into a

USB disk and open them in the Media Browser. Select

USB input from the Sources menu and press OK.

When you have chosen the desired image, highlight

it and press OK to view it in full screen. Press the

Info button, highlight the gear wheel symbol on the

information bar and press OK. Select Options and

press OK to enter. Set Boot Logo option will be

available. Highlight it and press OK again to choose the

image as custom boot logo. A confirmation message

will be displayed. Select Yes and press OK again. If

the image is suitable(*) you will see it on the screen

during the TV’s next boot up.

Note: You can use the Restore Default Boot Logo option in

the Settings>System>More menu to restore the default boot

logo. If you perform First Time Installation the boot logo will

also be restored to its default.

(*) Images should be in jpeg file formats. Only files with sizes

no greater then 4MB are supported. CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>Devices menu should

be set as Enabled at first. Press the Source button and

select the HDMI input of the connected CEC device

from the Sources List menu. When new CEC source

device is connected, it will be listed in source menu

with its own name instead of the connected HDMI ports

name(such as DVD Player, Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>Devices menu

accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV will mute its other audio

outputs, except the headphone jack, automatically

and volume control buttons are directed to connected

audio device. To activate ARC set the Sound Output

option in the Settings>Sound menu as HDMI ARC.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with the

TV. The volume can be controlled using the remote

control of the TV. To activate this feature set the

Sound Output option in the Settings>Sound menu

as HDMI ARC. When HDMI ARC option is selected,

CEC option will be set as Enabled automatically, if it

is not already set. The TV speakers will be muted and

the sound of the watched source will be provided from

the connected sound system.

Note: The audio device should support System Audio Control

feature.

English - 17 -

Settings Menu Content

Devices Menu Content

Virtual Remote Enable or disable the virtual remote feature.

Audio Video Sharing

This feature allows you to share files stored on your smartphone or tablet pc. If you have

a compatible smartphone or tablet pc and the appropriate software is installed, you can

share/play photos on your TV. See instructions of your sharing software for more information.

Timer of No Signal

If your TV does not receive any input signal (e.g. from an aerial or HDMI source) for

3 minutes, it will go into standby mode. You can enable or disable this functionality by

setting this option accordingly.

CEC With this setting you can enable and disable CEC functionality completely. Press Left

or Right button to enable or disable the feature.

CEC Auto Power On

This function allows the connected HDMI-CEC compatible device to turn on the TV

and switch to its input source automatically. Press Left or Right button to enable or

disable the feature.

Picture Menu Content

Mode You can change the picture mode to suit your preference or requirements. Picture mode can

be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,

Screen Off or Off.

Note: Available options may differ depending on the selected Mode.

Backlight This setting controls the backlight level. The backlight function will be inactive if the

Energy Saving is set to an option other than Custom.

Picture Zoom Sets the desired image size format.

Picture Shift This option may be available depending on the Picture Zoom setting. Highlight and

press OK, then use directional buttons to shift the picture upwards or downwards.

PC Position Appears only when the input source is set to VGA/PC.

Autoposition If the image is not centered in VGA mode use this option to automatically adjust the

position of the image. Press OK to start the auto adjustment.

H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture on

the screen. You can use phase to get a clearer picture by trial and error.

Advanced Settings

Dynamic

Contrast

You can change the dynamic contrast ratio to desired value.

Colour Temp Sets the desired colour temperature value. Cool, Normal, Warm and Custom options

are available.

White Point If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

English - 18 -

Vivid Blue White colour enhancement function that makes white colour more cooler in order to

make more bright picture. Set as On to enable.

Vivid Dimming Low, Medium, High and Off options are available. While Vivid Dimming is active, it

will enhance contrast locally for each defined zone.

Noise Reduction Low, Medium, High and Off options are available. If the signal is weak and the picture

is noisy, use the Noise Reduction setting to reduce the amount of noise.

Film Mode Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching films to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

Colour Tuner Opens colour tuner settings. Set the Colour Tuner as enabled to adjust the Hue, Colour

and Brightness values manually.

Gamut Mapping

You can use this option to set the range of colours displayed on your TV screen. When

set as On, colours are set according to the source signal. When set as Off, the TV’s

maximum colour capacity is used by default (recommended option).

Note: This option may not be available depending on the TV model and its features.

HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this feature

to enhance blackness in the picture.

Reset

Resets the picture settings to factory default settings (except Game mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu

while in PC mode.

English - 19 -

Sound Menu Content

Dolby Audio Smart, Movie, Music, News and Off options will be available. Set as Off to disable.

Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than Off.

Surround Sound Surround Sound mode can be changed as On or Off.

Sound Output

Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and

Lineout options will be available. There will be no sound output except through the

selected option and the headphone jack.

When you connect an external amplifier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone Only. Please ensure before using headphones that this menu

item is set to Headphone Only. If it is set to Lineout, the output from the headphone

socket will be set to maximum which could damage your hearing.

If HDMI ARC option is selected, CEC feature will be enabled.

Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be

unavailable.

AVL (Automatic

Volume Limiting)

Sets the sound to obtain fixed output level between programmes.

If the Dolby Audio menu item is set to an option other than Off the AVL setting options

will change. Auto, Night, Normal and Off options will be available. In Auto mode the

TV will switch to Normal or Night mode automatically according to the current time

information. If no time information is available this option will always function as Normal.

When the TV switches to Night mode for the first time after setting this option as Auto,

an information bar will pop up on the screen.

Please note that compared to Normal mode Night mode provides more aggressive

dynamic compression control which is suitable for silent environments.

Advanced Settings

Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.

Dynamic Bass Enables or disables the Dynamic Bass.

Sound Mode You can select a sound mode (If the viewed channel supports).

Digital Out Sets digital out audio type.

Headphone

Sets headphone volume. This option will not be available if the Sound Output option

is set as Lineout.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Balance

Sets sound balance. This feature will be activated if Sound Output option is set as

TV or Headphone Only. Balance item adjusts the balance level of the TV speakers

and headphone together.

Reset Resets some of the sound settings to factory defaults.

La pagina sta caricando ...

Panasonic TX40MS360E Istruzioni per l'uso

Panasonic TX40MS360E Istruzioni per l'uso

in altre lingue