IKEA 603.923.02 BEMOTA Wall Mounted Extractor Hood Istruzioni per l'uso

GB

DE

FR

IT

BEMOTA

ENGLISH 4

DEUTSCH 17

FRANÇAIS 30

ITALIANO 49

2

1345

Please refer to the last page

of this manual for the full list

of IKEA appointed Authorized

Service Centre and relative

national phone number

2

1345

2

1345

Consultare l’ultima pagina

di questo manuale dove è

riportato l’elenco completo

dei Centri Assistenza IKEA

Autorizzati con i relativi numeri

telefonici nazionali.

2

1345

Consultez la dernière page

de ce manuel contenant la

liste complète des services

Après-vente agréés IKEA avec

les numéros de téléphone

nationaux correspondants.

Konsultieren Sie die letzte Seite

dieser Bedienungsanleitung,

auf der die vollständige Liste

der nationalen autorisierten

IKEA Kundendienststellen mit

den entsprechenden Telefon-

nummern aufgelistet ist.

4

ENGLISH

Contents

Safety information 4

Product description 8

Care and cleaning 9

What to do if... 11

Technical data 12

Energy efficiency 13

Environment concerns 14

IKEA GUARANTEE 14

Safety information

For your safety and correct operation of the appliance, read

this manual carefully before installation and use. Always

keep these instructions with the appliance even if you move or

sell it. Users must fully know the operation and safety features

of the appliance.

The wire connection has to be done by specialized

technician.

• The manufacturer will not be held liable for any damages

resulting from incorrect or improper installation.

• The minimum safety distance between the cooker top and

the extractor hood is: for electrical hob 500mm and for gas

hob 500mm.

• If the instructions for installation for the gas hob specify a

greater distance, this must be respected.

• Check that the mains voltage corresponds to that indicated

on the rating plate fixed to the inside of the hood.

• Means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

• For Class I appliances, check that the domestic power supply

guarantees adequate earthing.

• Connect the extractor to the exhaust flue through a pipe of

minimum diameter 120 mm. The route of the flue must be

as short as possible.

• Do not connect the extractor hood to exhaust ducts carrying

combustion fumes (boilers, fireplaces, etc.).

5

ENGLISH

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient degree

of aeration must be guaranteed in the room in order to

prevent the backflow of exhaust gas. When the cooker hood

is used in conjunction with appliances supplied with energy

other than electric, the negative pressure in the room must

not exceed 0,04 mbar to prevent fumes being drawn back

into the room by the cooker hood.

• The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other

fuels.

• If the supply cord is damaged, it must be replaced from the

manufacturer or its service agent.

• Connect the plug to a socket complying with current

regulations, located in an accessible place.

• With regards to the technical and safety measures to be

adopted for fume discharging it is importat to closely follow

the regulations provided by the local authorities.

WARNING: Before installing the Hood, remove the

protective films.

• Use only screws and small parts in support of the hood.

WARNING: Failure to install the screws or fixing device in

accordance with these instructions may result in electrical

hazards.

• Connect the hood to the power net by using a bipolar switch

having a contact gap of at least 3 mm.

• Do not look directly at the light through optical devices

(binoculars, magnifying glasses…).

• Do not flambè under the range hood; risk of fire.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

6

ENGLISH

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Children should be supervised to ensure that they do not

play with the appliance.

• The appliance is not to be used by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

Accessible parts may become hot when used with cooking

appliances.

• Clean and/or replace the Filters after the specified time

period (Fire hazard).

• There shall be adequate ventilation of the room when the

range hood is used at the same time as appliances burning

gas or other fuels (not applicable to appliances that only

discharge the air back into the room)

7

ENGLISH

Use

• Switch off or unplug the appliance

from the mains supply before

carrying out any maintenance work.

• The top of the hood must not to be used

as a shelf.

• The extractor hood has been

designed exclusively for domestic

use to eliminate kitchen smells.

• Never use the hood for purposes

other than for which it has been

designed.

• Never leave high naked flames under

the hood when it is in operation.

• Adjust the flame intensity to direct

it onto the bottom of the pan only,

making sure that it does not engulf

the sides.

• Deep fat fryers must be continuously

monitored during use: overheated oil

can burst into flames.

Care and cleaning

• Grease filters must be cleaned every

2 months of operation, or more

frequently for particularly heavy

usage, and can be washed in a

dishwasher.

• Clean the hood using a damp cloth

and a neutral liquid detergent.

Care and cleaning long life Charcoal

filter (Green)

• The anti-odour Flter can be washed

and regenerated every 3-4 months

(or more frequently if the hood is

subject to intensive use), up to a

Max. of 8 regeneration cycles (in

case of particularly intensive use it

is recommended that you do not

exceed 5 cycles).

Regeneration procedure:

• Wash in the dishwasher at a MAX

temperature of 70° or hand wash in hot

water without using abrasive sponges

(do not use detergents!)

• Dry in the oven at a MAX temperature

of 70° for 2 hours or dry at room

temperature, standing the Flter in a

vertical position to facilitate drainage.

8

ENGLISH

Installation modes

The hood has been designed to be installed

and used either as a “Exhaust mode”, or as

a “Recirculation mode”.

Exhaust mode (see symbol

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

in

installation booklet)

Cooking steam is sucked and

channelled outside the house through

a discharge duct (not supplied), fitted to

the hood steam outlet.

Ensure that the discharge duct is

correctly fitted to the air outlet, unit

using an appropriate connection

system.

Recirculation mode (see symbol

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

in installation booklet)

The air is filtered through one or more

the charcoal filters, and then resent into

room.

Important: Ensure appropriate air

circulation around the hood.

Important: If the hood is supplied

without charcoal filters and installed on

recirculation mode, these must be fitted

before the hood can be used. Filters are

available in shops.

The hood should be installed away from

particularly dirty areas, windows, doors

and heat sources.

The accessories for wall fixing are not

included because wall made of different

materials require different types of

fixing accessories. Use fixing systems

suitable for the walls of your home and

the weight of the appliance. For more

details, contact a specialized dealer.

Keep this booklet for future

consultation.

Filters Alarm.

When the filter alarm is activated, the

following messages will appear over

time:

Grease filter must be cleaned:

“A” key flashes once per second. For

maintenance see paragraph Care and

cleaning.

Anti-odour filter must be cleaned:

“A” key flashes twice per second. For

maintenance see paragraph Care and

cleaning.

Once the filters have been regenerated

reset the alarm signal (see paragraph

Control Panel).

9

ENGLISH

Product description

Upper chimney

Lower chimney

Hood body

LED Lighting

Grease filter

Control panel

Control Panel

S0614 (170201)

backlight symbols

112

20 20 20 20

8

S0614 (170201)

backlight symbols

"

#

$

%

&

"

Speed

Turns the motor on/o at speed one.

Attention: the product is with the lter alarm disabled.

Press and hold the button for approximately 2 seconds, with all the loads turned o (Motor+Lights), to turn the grease lter alarm on. LED

(B) ashes twice to conrm.

To turn the alarm o, press the button again and hold for at least 2 seconds. The relevant LED (B) ashes once.

#

Speed

Turns the motor on at speed two / Activate charcoal lter alarm.

Attention: the product is with the lter alarm disabled.

Press and hold the button for approximately 2 seconds, with all the loads turned o (Motor+Lights), to turn the Activated Charcoal Filter

alarm on. LED (A) ashes twice to conrm.

To turn the alarm o, press the button again and hold for at least 2 seconds.The relevant LED ashes once (A). Only for recirculation mode.

$

Speed

Turns the Motor on at speed three / Reset alarm lter saturation.

Press and hold the button for approximately 2 seconds, with all the loads turned o (Motor+Lights), to reset the grease lter

saturation alarm or charcoal lter alarm. LED (A) ashes three times.

%

Speed

Turns the motor on at Booster speed.

This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to the speed that was set before. If it is

activated with the motor turned o, it will switch to OFF at the end of the time. To deactivate it, press button D or press button A.

&

Light

Press briey: Turns the lighting system on and o at maximum intensity.

Press and hold to change the lighting intensity up or down.

10

ENGLISH

Care and cleaning

Switch off or unplug the appliance

from the mains supply before carrying out

any maintenance work.

IMPORTANT Clean the hood using a damp

cloth and a neutral liquid detergent.

Long Life Charcoal Filter

The anti-odour Filter can be washed and

regenerated every 3-4 months (or more

frequently if the hood is subject to inten-

sive use), up to a Max. of 8 regeneration

cycles (in case of particularly intensive use

it is recommended that you do not exceed

5 cycles).

• Switch ON the hood at minimum speed when you start cooking and keep it running for

few minutes after cooking is finished.

• Increase the speed only in case of large amount of smoke and vapour and use boost

speed(s) only in extreme situations.

• Replace the charcoal filter(s) when necessary to maintain a good odour reduction ef-

ficiency.

• Clean the grease filter(s) when necessary to maintain a good grease filter efficiency.

• Use the maximum diameter of the ducting system indicated in this manual to optimize

efficiency and minimize noise.

General hints

Grease Filters

Clean or replace the filters continuously ac-

cording to below time intervals, to maintain

good performance of the hood and to

prevent a potential fire hazard, caused by

excessive grease build-up.

The grease filters must be cleaned every 2

months of operation, or more frequently

for particularly heavy usage, and can be

washed in a dishwasher.

Replacing the lamps

For Replacement please contact an Author-

ized Service Center.

11

ENGLISH

What to do if...

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find a

solution to the problem yourself, contact an

authorized service center.

If you operated the appliance wrongly,

or the installation was not carried out

according to the Assembly instructions, the

visit from the Authorized Service Centre

technician may not take place free of

charge, even during the warranty period.

Before contacting the Authorized Service Centre:

Switch the appliance on again to see if the problem has disappeared. If not, switch it off

again and repeat the operation after an hour.

If your appliance still does not work properly after carrying out the checks listed in the trou-

bleshooting guide and switching the appliance on again, contact the Authorized Service

Centre, clearly explaining the problem and specifying:

• the type of fault;

• the model;

• the type and serial number of the appliance (given on the rating plate).

PROBLEM POSSIBLE CAUSE SOLUTION

Appliance not stable. The appliance is not correctly

installed.

Follow the Installation instruction enclosed to the ap-

pliance.

Appliance is not in horizon-

tal position.

The appliance is not correctly

installed.

Follow the Installation instruction enclosed to the ap-

pliance.

Performance in terms of oil

capture are not satisfying.

Oil and grease on metal lters or

charcoal lters.

Follow the cleaning frequency of lters as described in

the user manual.

Appliance does not work. The appliance is not correctly con-

nected.

Verify that the main cable is connected to the motor

group or the plug is connected to the socket.

The light does not work. The LED is broken. For replacement, contact the Authorized Service Centre.

Noise of hood is higher

than customer expectation.

Air outlet diameter in the wall is too

small, causing a pressure drop and an

increase in motor speed.

Follow the Installation instruction enclosed to the ap-

pliance.

Product is installed in recirculation

mode.

Product in recirculation mode(and using a charcoal

lter) will generate an higher noise than a product in

extration mode.

More than one bend in the ventilation

duct.

If the exhaust system in the building has multiple bend

in or a long distance, this can increase the noise of the

product.

Button A light ashing once

per second. Grease lter alarm.

Please clean grease lter and reset alarm. Refer to care

and cleaning guide for maintenance.

Press and hold the “C” button for approximately 2

seconds, with all the loads turned o (Motor+Lights), to

reset the grease lter saturation alarm. LED (A) ashes

three times to conrm.

Button A lights ashing

twice per second. Charcoal lter alarm.

Charcoal lter alarm. Please clean charcoal lter and

reset alarm. Refer to care and cleaning guide for

maintenance.

Press and hold the “C” button for approximately 2

seconds, with all the loads turned o (Motor+Lights),

to reset the charcoal lter alarm. LED (A) ashes three

times to conrm

12

ENGLISH

This appliance has been designed,

manufactured and marketed in compliance

with the E.E.C. Directives.

The technical information is situated in

the rating plate on the internal side of the

appliance.

Technical Data

Unit Value

Product Type Wall mounted hood

Dimensions

Width mm 698

Depth mm 381

Exhaust Height min/max mm 815/1065

Recirculating Height min/max mm 912/1185

Airow max* - Exhaust m3/h 380

Noise max* - Exhaust dBA 60

Airow max* - Recirculating m3/h 365

Noise max* - Recirculating dBA 78

Total Power W276

Lamps info

Type LED BAR

Number & Power 1 x 6W

Socket N/A

Installation minimum height - gas hob mm 500

Installation minimum height - elec hob mm 500

Net Weight Kg 16,5

* Maximum speed (boost excluded).

13

ENGLISH

Energy efficiency

Normative references:

EN/IEC 61591

EN/IEC 60704-1

EN/IEC 60704-2-13

EN/IEC 60704-3

EN 50564

Energy saving

The appliance contains features which help

you save energy during everyday cooking.

Product Information according to EU n°66/2014

Unit Value

Model identier BEMOTA

603.923.02

Annual Energy Consumption kWh/a 34,8

Time increase factor 0,6

Fluid Dynamic Eciency

37,6

Energy Eciency Index 36,6

Measured air ow rate at best eciency point m3/h 410

Measured air pressure at best eciency point Pa 459

Maximum air ow m3/h 700

Measured electric power input at best eciency point W139,0

Nominal power of the lighting system W6,0

Average illumination of the lighting system on the cooking surface lux 350

Measured power consumption in standby mode

WN/A

Measured power consumption o mode

W0,49

Sound power level at maximum speed (boost excluded)

dBA 60

14

ENGLISH

Environment concerns

IKEA GUARANTEE

Maintenance

• The symbol on the product or on

its packaging indicates that this product

may not be treated as household waste.

Instead it shall be handed over to the ap-

plicable collection point for the recycling

of electrical and electronic equipment.

By ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the environ-

ment and human health, which could

otherwise be caused by inappropriate

waste handling of this product.

For more detailed information about

How long is the IKEA guarantee valid?

This guarantee is valid for five (5) years

from the original date of purchase of Your

appliance at IKEA. The original sales receipt

is required as proof of purchase. If service

work is carried out under guarantee, this

will not extend the guarantee period for the

appliance.

Who will execute the service?

IKEA service provider will provide the ser-

vice through its own service operations or

authorized service partner network.

What does this guarantee cover?

The guarantee covers faults of the appli-

ance, which have been caused by faulty

construction or material faults from the

date of purchase from IKEA. This guarantee

applies to domestic use only. The excep-

tions are specified under the headline

“What is not covered under this guaran-

tee?” Within the guarantee period, the

costs to remedy the fault e.g. repairs, parts,

labour and travel will be covered, provided

that the appliance is accessible for repair

recycling of this product, please contact

your local city office, your household

waste disposal service or the shop

where you purchased the product.

Packaging materials

The materials with the symbol are re-

cyclable. Dispose the packaging in suitable

collection containers to recycle it.

without special expenditure. On these

conditions the EU guidelines (Nr. 99/44/

EG) and the respective local regulations

are applicable. Replaced parts become the

property of IKEA.

What will lKEA do to correct the prob-

lem?

IKEA appointed service provider will exam-

ine the product and decide, at its sole dis-

cretion, if it is covered under this guarantee.

If considered covered, IKEA service provider

or its authorized service partner through

its own service operations, will then, at its

sole discretion, either repair the defective

product or replace it with the same or a

comparable product.

What is not covered under this guaran-

tee?

• Normal wear and tear.

• Deliberate or negligent damage, dam-

age caused by failure to observe operat-

ing instructions, incorrect installation

or by connection to the wrong voltage,

15

ENGLISH

damage caused by chemical or electro-

chemical reaction, rust, corrosion or

water damage including but not limited

to damage caused by excessive lime in

the water supply, damage caused by

abnormal environmental conditions.

• Consumable parts including batteries

and lamps.

• Non-functional and decorative parts

which do not affect normal use of the

appliance, including any scratches and

possible color differences.

• Accidental damage caused by foreign

objects or substances and cleaning or

unblocking of filters, drainage systems

or soap drawers.

• Damage to the following parts: ceramic

glass, accessories, crockery and cutlery

baskets, feed and drainage pipes, seals,

lamps and lamp covers, screens, knobs,

casings and parts of casings. Unless

such damages can be proved to have

been caused by production faults.

• Cases where no fault could be found

during a technician’s visit.

• Repairs not carried out by our appointed

service providers and/or an authorized

service contractual partner or where

non-original parts have been used.

• Repairs caused by installation which is

faulty or not according to specification.

• The use of the appliance in a non-do-

mestic environment i.e. professional use.

• Transportation damages. If a customer

transports the product to their home or

other address, IKEA is not liable for any

damage that may occur during trans-

port. However, if IKEA delivers the prod-

uct to the customer’s delivery address,

then damage to the product that occurs

during this delivery will be covered by

this guarantee.

• Cost for carrying out the initial installa-

tion of the IKEA appliance. However, if

an IKEA service provider or its author-

ized service partner repairs or replaces

the appliance under the terms of this

guarantee, the service provider or its au-

thorized service partner will re-install the

repaired appliance or install the replace-

ment, if necessary.

This restriction do not apply to fault-free

work carried out by a qualified specialist us-

ing our original parts in order to adapt the

appliance to the technical safety specifica-

tions of another EU country.

How country law applies

The IKEA guarantee gives You specific legal

rights, which covers or exceed local de-

mands. However these conditions do not

limit in any way consumer rights described

in the local legislation

Area of validity

For appliances which are purchased in

one EU country and taken to another EU

country, the services will be provided in the

framework of the guarantee conditions

normal in the new country. An obligation to

carry out services in the framework of the

guarantee exists only if the appliance com-

plies and is installed in accordance with:

• the technical specifications of the

country in which the guarantee claim is

made;

• the Assembly Instructions and User

Manual Safety Information;

The dedicated After Sales Service for

IKEA appliances:

Please do not hesitate to contact IKEA After

Sales Service to:

1. make a service request under this guar-

antee;

2. ask for clarification on installation of the

IKEA appliance in the dedicated IKEA

kitchen furniture. The service won’t

provide clarifications related to:

- the overall IKEA kitchen installation;

- connections to electricity (if machine

16

ENGLISH

comes without plug and cable), to water

and to gas since they have to be execut-

ed by an authorized service engineer.

3. ask for clarification on user manual

contents and specifications of the IKEA

appliance.

To ensure that we provide you with the best

assistance, please read carefully the Assem-

bly Instructions and/or the User Manual

section of this booklet before contacting us.

How to reach us if You need our service

Please refer to the last page of this manual

for the full list of IKEA appointed contacts

and relative national phone numbers.

Important! In order to provide You with a

quicker service, we recommend that You

use the specific phone numbers listed at

the end of this manual. Always refer to

the numbers listed in the booklet of the

specific appliance You need an assistance

for. Before calling us, assure that You have

to hand the IKEA article number (8 digit

code) for the appliance of which you need

our assistance.

Important! SAVE THE SALES RECEIPT! It is

Your proof of purchase and required for the

guarantee to apply. Note that the receipt

reports also the IKEA article name and

number (8 digit code) for each of the appli-

ances you have purchased.

Do You need extra help?

For any additional questions not related

to After Sales of your appliances. Please

contact our nearest IKEA store call centre.

We recommend you read the appliance

documentation carefully before contacting

us.

17

DEUTSCH

Inhalt

Sicherheitsinformationen 17

Produktbeschreibung 21

Reinigung und Wartung 22

Was tun wenn... 24

Technische Daten 25

Energieeffizienz 26

Umweltaspekte 27

IKEA-GARANTIE 27

Sicherheitsinformationen

Zu Ihrer eigenen Sicherheit und für die korrekte Funktion des

Gerätes lesen Sie bitte diese Betriebsanleitung aufmerksam

durch, bevor Sie das Gerät installieren und benutzen. Verwahren Sie

die Bedienungsanleitung stets zusammen mit dem Gerät, auch

wenn Sie dieses an Dritte weitergeben oder übertragen. Es ist

wichtig, dass der Benutzer alle Betriebs- und Sicherheitsmerkmale

des Gerätes kennt.

Die Kabel müssen von einem zuständigen Fachmann

angeschlossen werden.

• Der Hersteller haftet nicht für etwaige Schäden, die durch eine

fehlerhafte Installation oder einen ungeeigneten Gebrauch

entstehen könnten.

• Der minimale Sicherheitsabstand zwischen Kochfeld und

Abzugshaube beträgt: für Elektro-Kochfelder 500 mm und für

Gas-Kochfelder 500 mm.

• Sollten die Installationsanweisungen des gasbetriebenen

Kochfelds einen größeren Abstand als oben angegeben vorsehen,

ist dies zu berücksichtigen.

• Sicherstellen, dass die Netzspannung der auf dem Typenschild

angegebenen Spannung entspricht. Das Typenschild ist im

Inneren der Haube angebracht.

• Trennvorrichtungen müssen in der festen Anlage gemäß Normen

über Verkabelungssysteme installiert werden.

• Für Geräte der Klasse I sicherstellen, dass das Versorgungsnetz

des Gebäudes korrekt geerdet ist.

• Die Abzugshaube an den Schornstein mit einem Rohr mit

18

DEUTSCH

Mindestdurchmesser von 120 mm anschließen. Der Verlauf des

Rauchabzugs muss so kurz wie möglich sein.

• Die Abzugshaube darf nicht an einen Schacht angeschlossen

werden, in den Rauchgase abgeleitet werden (z. B. von

Heizkesseln, Kaminen, usw.).

• Falls die Abzugshaube mit Geräten verwendet wird, die nicht

elektrisch betrieben sind (z.B. Gasgeräte), muss im Raum für eine

ausreichende Belüftung gesorgt werden, damit der Rückfluss

der Abgase verhindert wird. Wird die Abzugshaube zusammen

mit nicht elektrisch betriebenen Geräten eingesetzt, darf der

Unterdruck im Raum 0,04 mbar nicht überschreiten, damit die

Abgase nicht wieder angesaugt werden.

• Die Luft darf nicht durch einen Kanal abgelassen werden, der als

Rauchabzug für Gasgeräte oder Geräte verwendet wird, die mit

anderen Brennstoffen betrieben werden.

• Wenn das Gerätekabel beschädigt ist, muss es vom Hersteller

oder von einem Kundendiensttechniker ersetzt werden.

• Den Stecker in eine den einschlägigen Vorschriften entsprechende

zugängliche Steckdose stecken.

• Was die technischen und sicherheitsrelevanten Maßnahmen

für den Rauchabzug betrifft, sind die Vorgaben der örtlichen

Behörden streng einzuhalten.

WARNUNG: Bevor die Haube installiert wird, die Schutzfolien

abziehen.

• Nur für die Abzugshaube geeignete Schrauben und Kleinteile

verwenden.

WARNUNG: Die mangelnde Verwendung von Schrauben und

Befestigungselementen gemäß der vorliegenden Anleitung

kann zu Stromschlaggefahr führen.

• Die Haube an das Stromnetz mithilfe eines zweipoligen Schalters

mit einem Kontaktabstand von mindestens 3 mm anschließen.

• Nicht direkt mit optischen Instrumenten (Fernglas, Lupe, usw.) in

das Licht schauen.

19

DEUTSCH

• Auf keinen Fall unter der Haube flambieren: Dabei könnte ein

Brand entstehen.

• Dieses Gerät darf von Kindern ab 8 Jahren und von Personen

mit beschränkten geistigen, physischen oder sensorischen

Fähigkeiten oder mangels Erfahrung und/oder mangels Wissen

benutzt werden, vorausgesetzt, sie werden aufmerksam

beaufsichtigt oder über den sicheren Gebrauch des Geräts und

die damit verbundenen Gefahren eingewiesen. Sicherstellen, dass

Kinder nicht mit dem Gerät spielen. Vom Benutzer auszuführende

Reinigungs- und Wartungsarbeiten dürfen nicht von Kindern

ausgeführt werden, sofern sie nicht dabei beaufsichtigt werden.

• Kinder müssen beaufsichtigt werden, damit sichergestellt wird,

dass sie nicht am Gerät spielen.

• Dieses Gerät darf nicht von Personen (einschließlich Kindern)

mit beschränkten geistigen, physischen oder sensorischen

Fähigkeiten oder mangels Erfahrung und/oder mangels Wissen

benutzt werden, außer sie werden aufmerksam beaufsichtigt und

eingewiesen.

Die frei zugänglichen Teile können während des Kochens mit

Kochgeräten sehr heiß werden.

• Die Filter sind nach den angegebenen Intervallen zu reinigen und/

oder zu ersetzen (Brandgefahr).

• Wenn die Abzugshaube gleichzeitig mit Geräten verwendet wird,

die Gas oder andere Brennstoffe benutzen, muss im Raum eine

ausreichende Belüftung vorhanden sein (gilt nicht für Geräte, die

nur Luft in den Raum ablassen)

20

DEUTSCH

Gebrauch

• Vor Reinigungs- oder Wartungsarbeiten

am Gerät muss dieses ausgeschaltet

und spannungslos gemacht werden.

• Keine Gegenstände auf der

Abzugshaube abstellen.

• Die Abzugshaube wurde ausschließlich

dazu entwickelt, um im Haushalt

Küchendünste zu beseitigen.

• Die Haube niemals für andere Zwecke

verwenden, als die für welche sie

entwickelt worden ist.

• Unter der eingeschalteten Haube keine

offenen hohen Flammen benutzen.

• Die Flamme so regulieren, dass sie nicht

über den Umfang des Kochgeschirrs

hinausragt.

• Fritteusen müssen während des

Gebrauchs ständig überwacht werden:

überhitztes Öl könnte sich entzünden.

Reinigung und Wartung

• Die Fettfilter sind alle 2 Betriebsmonate

oder bei intensiver Nutzung häufiger

zu reinigen und können in der

Spülmaschine gewaschen werden.

• Die Haube mit einem feuchten Lappen

und einem neutralen Putzmittel

reinigen.

Reinigung und Wartung des langlebigen

Aktivkohlefilters (grün)

• Der Geruchsfilter kann alle 3-4 Monate

(oder bei intensivem Gebrauch häufiger)

gewaschen und bis maximal 8 Mal

regeneriert werden (bei besonders

intensivem Gebrauch, empfehlen

wir den Filter nicht mehr als 5 Mal zu

regenerieren).

Regenerierungsprozedur:

• In der Spülmaschine bei max. 70°

oder von Hand mit warmem Wasser

waschen, ohne scheuernde Schwämme

zu benutzen (keine Waschmittel

verwenden!)

• Zwei Stunden im Ofen bei einer

Temperatur von max. 70° trocknen

(lesen Sie bitte aufmerksam die

Gebrauchs- und Montageanleitung Ihres

Ofens).

La pagina si sta caricando...

IKEA 603.923.02 BEMOTA Wall Mounted Extractor Hood Istruzioni per l'uso

IKEA 603.923.02 BEMOTA Wall Mounted Extractor Hood Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti