en Home Connect
18
Remote start button }
Re mot e st ar t but t on
If the dishwasher is connected to the
home network, you can activate the
dishwasher's remote control.To do so,
press the remote start button } `.
If the dishwasher has not yet logged
into Home Connect, perform automatic
network login ‘’ by pressing the
remote start button } `.
Observe the Home Connect documents
supplied.
Notes
■ To remotely control the dishwasher,
the remote start button } ` must
be activated.
■ The remote start button } ` goes
out when the login process is
complete.
■ Opening the door deactivates
remote control.
■ If the display WLAN H is flashing,
there is no network connection.
Wi-Fi without a connection to
the Home Connect server
Wi-Fi wi t hout a connec t i on to the Ho me Connec t ser ver
You can use the Home Connect app
to disconnect from the Home Connect
server. The dishwasher is then locally
connected to your mobile device
without however any connection to the
Home Connect server.
Notes
■ If there is no connection to the Home
Connect server, this is displayed in
the app.
■ If you did not deactivate the
connection to the Home Connect
server, check your Internet
connection.
Energy manager •
Ener gy manager
With the energy manager •, your
dishwasher automatically starts during a
time period you select with the cheapest
power supply offered at the time by your
alternative energy source (for example,
photovoltaic system).
If the energy manager • is unable to
start the dishwasher remotely (for
example, due to insufficient supply of
power from the photovoltaic system), it
will start the dishwasher at the latest
time possible using a conventional
power supply.
Note: The menu item “:Ÿ® is not
available until there is a connection to
the home network and the dishwasher
is connected to the app.
Setting up energy manager •:
1. Switch on ON/OFF switch (.
2. Press and hold the button ‹
for 3 seconds.
In the display window @ you will
see •:‹... and ‘ .
3. Press the button ‹ repeatedly
until “:Ÿ® appears in the display
window @.
4. Press the setting button + P.
In the display window @ you will
see ’:©Ÿ.
5. Start connection with the setting
button + P.
6. Connect your dishwasher to the
energy manager of the home
system. Also activate connection on
the energy manager of your home
system. (Observe the instruction
manual of your energy manager
manufacturer.)
If connection is successful, ™:©Ÿ
appears in the display window @.
If connection is unsuccessful, repeat the
process.
Further information and system
requirements for using the energy
manager can be found at
www.home-connect.com.