Candy FCNE613X Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

PROPERTY OF
CL N° REV. DATE
SPECIFICATION
1/1
MODIFY DESCRIPTION
MODIFIED BY
BASE CODE
TREATMENT
MATERIAL
DATE SIGNATURE
DRAWN
CHECKED
FOR
WEIGHT SCALE
SIZE
NAME
(LOCAL LANGUAGE)
PART CODE
SHEET
REPLACE No ORIGIN CL No Class Specification
RELEASE LEVEL
WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN
ALL RIGHTS RESERVED, THE REPRODUCTION OF ANY PART
OF EU DIRECTIVE 2002/95/CE + AMENDMENTS
MATERIALS IN COMPLIANCE WITH REQUIREMENTS
A5
------------
27.11.2020
KULLANMA KILAVUZUL C HNMEF02
61813
27.11.2020
C.FİDANCI
K.ÖZGÜR
USER MANUAL C HNMEF02
OVEN
GENERAL TOLERANCE
ISO 2768 - m
Printing Color
Grey Scala
-
SC 000-000
PRODUCTION RELEASED
------------
A
B
C
D
E
4 2 8 3 5 9 1 1
White Paper
2 2
52 gr/m - 70 gr/m
61813 27.11.20
Kontrol paneli görüntüsü ve 60'lık timer açıklaması eklendi. / Control panel image and 60 timer description have been added.
C.FİDANCI
USER INSTRUCTIONS
OVENS
MANUALE D’ISTRUZIONI
FORNO
EN
02
IT
15
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
Safety Indications
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect,
wait 10-15 minutes after turning on the power before putting food
inside the oven. ln any case, the condensation disappears when the
oven reaches the cooking temperature.
Cook the vegetables in a container with a lid instead of an open tray.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
WARNING: the accessible parts can become hot when the grill is in
use. Children should be kept at a safe distance.
WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.
WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not
be powered by an external switching device, such as a timer, or be
connected to a circuit that is regularly switched on and off.
Children under 8 should be kept at a safe distance from the appliance
if not continuously supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with
instruction as to the operation of the appliance, in a safe way with
awareness of the possible risks.
Cleaning and maintenance should not be carried out by unsupervised
children.
Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.
The oven must be switched off before removing the removable parts.
After cleaning, reassemble them according the instructions.
EN 02
Only use the meat probe recommended for this oven.
Do not use a steam cleaner for cleaning operations.
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is
yellow-green in colour. This operation should be carried out by a suitably
qualified professional. ln case of incompatibility between the socket and
the appliance plug, ask a qualified electrician to substitute the socket
with another suitable type. The plug and the socket must be conformed
to the current norms of the installation country. Connection to the
power source can also be made by placing an omnipolar breaker
between the appliance and the power source that can bear the
maximum connected load and that is in line with current legislation. The
yellow-green earth cable should not be interrupted by the breaker. The
socket or omnipolar breaker used for the connection should be easily
accessible when the appliance is installed.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be
H05V2V2-F. This operation should be carried out by a suitably qualified
professional. The earth conductor (yellow-green) must be
approximately 10 mm longer than the other conductors. For any repairs,
refer only to the Customer Care Department and request the use of
original spare parts.
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
Any excess of spilled material should be removed before cleaning.
A long power supply failure during an occurring cooking phase may
cause a malfunction of the monitor. ln this case contact customer
service.
EN 03
The appliance must not be installed behind a decorative door in order
to avoid overheating.
• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity. The shelf must be inserted
completely into the cavity.
WARNING: Do not line the oven walls with aluminium foil or single-use
protection available from stores. Aluminium foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
WARNING: Never remove the oven door seal.
CAUTION: Do not refill the cavity bottom with water during cooking or
when the oven is hot.
No additional operation/setting is required in order to operate the
appliance at the rated frequencies.
EN 04
Summary
EN 05
General Instructions
6
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
8
3.1 Display description
3.2 Using the minute timer
3.3 Cooking modes
Use of the Oven
9
4.1 General notes on cleaning
4.2 Aquactiva Function
4.3 Maintenance
• Removing and cleaning wire racks
• Removal of the oven window
• Removal and cleaning of the glass
door
• Changing the bulb
Oven Cleaning and Maintenance
11
5.1 F.A.Q.
Troubleshooting
14
1. General Instructions
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you have purchased.
1.1 Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsible for any damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some fundamental rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.
1.2 Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correct supply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac power between the phases or between the phase and neutral. Before the oven is connected to
the electrical supply, it is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
EN 06
1.3 Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
we advise you only use dishes and baking moulds resistant to very high temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last page according to the type of fitting.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The power
cable must only be substituted by technical service staff or by technicians with equivalent qualifications.
1.5 Waste management and environmental protection
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergo specific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a few basic rules:
- the WEEE should not be treated as domestic waste;
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reduced tariff time slot.
1.6 Declaration of compliance
By placing the mark on the appliance, we are confirming compliance to all relevant European
safety, health and environmental requirements which are applicable in legislation for this product.
EN 07
A low light around the central main switch could be present when the oven is off. This is a normal
behavior. I can be removed just turning the plug upside down or swapping the supply terminals.
2.3 First Use
PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
2. Product Description
2.1 Overview
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Oven door
2.2 Accessories
Drip pan
1
Collects the residues that drip during the cooking
of foods on the grills.
EN 08
Metal grill
2
Holds baking trays and plates.
Lateral wire grids
3
It located at both sides of the oven cavity. It holds
metal grills and drip pans.
2
3
5
4
6
1
EN 09
3. Use of the Oven
3.1 Display description
1. Thermostat selector knob
2. Function selector knob
This control enables to set the desired cooking time (max. 120 min.) the oven will
automatically switch off at the end of the set time.
The timer will count down from the set time return to the O position and switch off
automatically.
For normal use of oven set the timer to the position.
To set the oven ensure the timer is not on the O position.
3.2 Using the minute timer
To set the cooking time, turn dial one complete revolution and then position
the index to the required time. When the time has lapsed, the signal will ring
for a few seconds.
3.3 Cooking Modes
T °C
Suggested
180
210
230
Function
Dial
Function (Depends on the oven model)
LAMP: Turns on the oven light.
GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature. Five minutes
preheating is required to get the elements red-hot. Success is guaranteed for grills, kebabs
and gratin dishes. White meats should be put at a distance from the grill; the cooking time
is longer, but the meat will be tastier. You can put red meats and fish fillets on the shelf with
the drip tray underneath.
FAN COOKING: We recommend you use this method for poultry, pastries, fish and
vegetables. Heat penetrates into the food better and both the cooking and preheating
times are reduced. You can cook different foods at the same time with or without the
same preparation in one or more positions. This cooking method gives even heat
distribution and the smells are not mixed.
Allow about ten minutes extra when cooking foods at the same time.
DEFROST: When the dial is set to this position. The fan circulates air at room temperature
around the frozen food so that it defrosts in a few minutes without the protein content of the
food being changed or altered.
BOTTOM HEATING + FAN: The bottom heating element is used with the fan circulating the
air inside the oven. This method is ideal for juicy fruit flans, tarts, quiches and pâté.
It prevents food from drying and encourages rising in cakes, bread dough and other bottom-
cooked food.
Place the shelf in the bottom position.
220
CONVENTIONAL: Both top and bottom heating elements are used. Preheat the oven for
about ten minutes. This method is ideal for all traditional roasting and baking. For seizing
red meats, roast beef, leg of lamb, game, bread, foil wrapped food (papillotes), flaky pastry.
Place the food and its dish on a shelf in mid position.
PIZZA: With this function hot air circulated in the oven to ensure perfect result for dishes such as
pizza or cake.
220
190
*
COOK LIGHT: This function allows to cook in a healthier way, by reducing the amount of fat or
oil required. The combination of heating elements with a pulsating cycle of air ensures a
perfect baking result.
*
*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class
T °C
range
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
EN 10
EN 11
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in
hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.
4.2 Aquactiva Function
The Aquactiva procedure uses steam to help remove remaining fat and food particles from the oven.
1. Pour 300 ml of water into the Aquactiva container at the bottom of the oven.
2. Set the oven function to Static ( )or Bottom ( )heater
3. Set the temperature to the Aquactiva icon
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program and allow the oven to cool down.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
Warning:
Make sure that the appliance is cool before you touch it.
Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.
N.B.: Certain pyrolytic ovens with the Precò Touch User Interface offer the Aquactiva function. To
activate it, set the function selector to the AQUACTIVA symbol ( ) and set the oven temperature
to 90°, using the “-” and “+” keys.
300 ml
4.3 Maintenance
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
3. Replace the window by carrying out the procedure in reverse.
Removing and cleaning wire racks
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are
dried afterwards.
3. After the cleaning process install the wire racks in reverse order.
EN 12
REMOVAL AND CLEANING OF THE GLASS DOOR
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.
LOW-E
1
2
3
1.
2.
3.
4.
5.
6.
7.
EN 13
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
EN 14
Durante la cottura, l'umidità può condensarsi all'interno del vano
cottura o sul vetro della porta. Questa è una condizione normale. Per
ridurre questo effetto, attendere 10-15 minuti dopo l'accensione
prima di mettere gli alimenti all'interno del forno. In ogni caso, la
condensa scompare quando il forno raggiunge la temperatura di
cottura.
• Cuocere le verdure in un contenitore con coperchio invece che in
un vassoio aperto.
• Evitare di lasciare gli alimenti all'interno del forno dopo la cottura
per più di 15/20 minuti.
AVVERTENZA: l'elettrodomestico e le sue parti accessibili
diventano calde durante l’uso.
Fare attenzione a non entrare in contatto con componenti
surriscaldati.
AVVERTENZA: le parti accessibili possono diventare calde quando si
utilizza il grill. I bambini devono rimanere a distanza di sicurezza.
AVVERTENZA: assicurarsi che l'elettrodomestico sia spento prima
di sostituire la lampadina per evitare ogni possibilità di folgorazione.
AVVERTENZA: per evitare rischi causati da un involontario ripristino
dell'interruttore automatico, l'elettrodomestico non deve essere
alimentato da un dispositivo di commutazione esterno, quale ad
esempio un
contaminuti, oppure essere collegato ad un circuito che viene
regolarmente acceso e spento.
Mantenere lontano dall'elettrodomestico i bambini di età inferiore
agli 8 anni, a meno che non siano continuamente supervisionati.
I bambini non devono giocare con l’elettrodomestico.
L'elettrodomestico può essere utilizzato da bambini di età superiore
a 8 anni e da persone con ridotte capacità fisiche, sensoriali o
mentali, oppure prive di esperienza e conoscenza, che siano state
supervisionate o istruite riguardo all’uso dell’elettrodomestico in
sicurezza, comprendendo i rischi che derivano dall'uso dello stesso.
Le operazioni di pulizia e manutenzione non devono essere
Indicazioni di Sicurezza
IT 15
effettuate dai bambini senza sorveglianza.
• Non utilizzare materiali ruvidi, abrasivi o raschietti metallici affilati
per pulire le porte in vetro del forno, dato che possono graffiare la
superficie e causare la frantumazione del vetro.
Il forno deve essere spento prima di rimuovere le parti rimovibili.
Dopo la pulizia, rimontarle secondo le istruzioni.
Utilizzare solo la sonda carne consigliata per questo forno.
Non utilizzare un getto di vapore per pulire l’elettrodomestico.
Collegare al cavo di alimentazione una spina dimensionata per la
tensione, la corrente e la potenza indicate nella targhetta e dotata del
contatto di terra. La presa deve essere adatta al carico indicato sulla
targhetta e deve avere il contatto di terra collegato e in funzione. Il
conduttore di terra è di colore giallo-verde.
Questa operazione deve essere eseguita solo da un tecnico
adeguatamente addestrato. In caso di incompatibilità tra presa e
spina dell'elettrodomestico, richiedere ad un tecnico specializzato di
sostituire la presa con un'altra di tipo compatibile. La spina e la presa
devono essere conformi alle normative attuali del paese di
installazione.
Il collegamento alla rete di alimentazione può essere effettuato
anche collocando un interruttore automatico onnipolare tra
l'elettrodomestico e la rete di alimentazione, in grado di supportare il
carico massimo collegato, in linea con la legislazione corrente.
Il cavo di terra giallo-verde non deve essere interrotto
dall'interruttore automatico. La presa o l'interruttore automatico
onnipolare utilizzati per il collegamento devono essere facilmente
accessibili al momento del montaggio dell'elettrodomestico.
La disconnessione può essere eseguita con la spina accessibile o
aggiungendo un interruttore sul cablaggio fisso, nel rispetto delle
normative relative ai cablaggi.
Se il cavo di alimentazione si danneggia, deve essere sostituito con
un cavo o uno speciale fascio di cavi disponibile presso il produttore o
contattando il reparto assistenza al cliente.
Il cavo di alimentazione deve essere di tipo H05V2V2-F
IT 16
Questa operazione deve essere eseguita solo da un tecnico
adeguatamente addestrato. Il conduttore di terra (giallo-verde) deve
essere circa 10 mm più lungo degli altri conduttori. Per qualsiasi tipo
di riparazione, fare riferimento unicamente al Reparto di Assistenza
Cliente e richiedere l'utilizzo di ricambi originali.
Il mancato rispetto di quanto indicato sopra può compromettere la
sicurezza dell'elettrodomestico e rendere nulla la garanzia.
• Qualsiasi materiale fuoriuscito in eccesso deve essere tolto prima
della pulizia.
L’interruzione prolungata dell’alimentazione durante una fase di
cottura potrebbe causare un guasto del monitor. In tal caso
contattare il servizio clienti.
• Lelettrodomestico non deve essere installato dietro a una porta a
scopo ornamentale per evitarne il surriscaldamento.
Quando si posiziona uno scaffale all’interno, accertarsi che il blocco
sia rivolto verso l’alto e nella parte posteriore della guida. Lo scaffale
deve essere inserito completamente nella guida
AVVERTENZA: Non rivestire le pareti del forno con fogli di alluminio
o protezioni monouso disponibili nei negozi. I fogli di
alluminio o qualsiasi altra protezione, a diretto
contatto con lo smalto caldo, rischiano di
fondere e deteriorare lo smalto degli interni.
AVVERTENZA: Non togliere mai la guarnizione della porta del forno.
ATTENZIONE: Non riempire il fondo della cavità con acqua durante
la cottura o quando il forno è caldo.
• Per far funzionare l'apparecchio alle frequenze nominali non sono
necessarie ulteriori operazioni o regolazioni.
IT 17
IT 18
Sommario
Avvertenze Generali
19
1.1 Suggerimenti sulla sicurezza
1.2 Sicurezza elettrica
1.3 Raccomandazioni
1.4 Installazione
1.5 Gestione dei rifiuti
1.6 Dichiarazione di conformità
2.1 Panoramica
2.2 Accessori
2.3 Primo utilizzo
Descrizione del Prodotto
21
3.1 Descrizione del display
3.2 Uso del contaminuti
3.3 Modalità di cottura
Utilizzo del Forno
22
4.1.Note generiche di pulizia
4.2 Funzione Aquactiva
4.3 Manutenzione
• Rimozione e pulizia delle scaffalature
a filo
• Rimozione dello sportello del forno
• Rimozione e pulizia della porta in
vetro
• Sostituzione della lampadina
Pulizia e Manutenzione del Forno
24
5.1 F.A.Q.
Risoluzione dei problemi
27
Garanzie
27
1. Avvertenze Generali
Vi ringraziamo per aver scelto uno dei nostri prodotti. Per
utilizzare il forno in modo ottimale è consigliabile leggere
con attenzione questo manuale e conservarlo con cura
per ogni ulteriore consultazione. Prima di installare il forno,
prendere nota del numero di serie in modo da poterlo
comunicare al personale del servizio di assistenza in caso
di richiesta di intervento. Dopo aver rimosso il forno
dall’imballaggio, verificare che non abbia subito danni
durante il trasporto. In caso di dubbi, non utilizzare il forno
e richiedere l’assistenza di un tecnico qualificato. Tenere
tutto il materiale da imballaggio (sacchetti di plastica,
polistirolo, chiodi) fuori dalla portata dei bambini. Alla
prima accensione del forno può svilupparsi fumo di odore
acre, causato dal primo riscaldamento del collante dei pannelli d’isolamento avvolgenti il forno: si tratta di un
fenomeno assolutamente normale e, in caso si verificasse, occorre attendere la cessazione del fumo prima di
introdurre le vivande. Il produttore declina ogni responsabilità in caso di mancata osservanza delle istruzioni
contenute in questo documento.
NOTA: le funzioni, le proprietà e gli accessori dei forni citati in questo manuale possono variare a seconda dei
modelli.
1.1 Suggerimenti sulla Sicurezza
Utilizzare il forno solo per lo scopo per cui è stato progettato, ossia solo per la cottura di alimenti; qualsiasi
altro utilizzo, ad esempio come fonte di riscaldamento, è considerato improprio e quindi pericoloso. Il
costruttore non può essere considerato responsabile per eventuali danni derivanti da usi impropri, erronei ed
irragionevoli.
L’uso di un qualsiasi apparecchio elettrico comporta l’osservanza di alcune regole fondamentali:
- non tirare il cavo di alimentazione per staccare la spina della presa di corrente;
- non toccare l’apparecchio con mani o piedi bagnati o umidi;
- in generale è sconsigliabile l’uso di adattatori, prese multiple e prolunghe;
- in caso di guasto e/o cattivo funzionamento dell’apparecchio, spegnerlo e non manometterlo.
1.2 Sicurezza Elettrica
FARE EFFETTUARE I COLLEGAMENTI ELETTRICI AD UN’ELETTRICISTA O TECNICO QUALIFICATO.
La rete di alimentazione a cui viene collegato il forno deve essere conforme con le normative in vigore nel
paese di installazione. Il produttore declina ogni responsabilità per eventuali danni derivanti dalla mancata
osservanza di tali disposizioni. Il forno deve essere collegato alla rete elettrica tramite una presa a muro con
messa a terra o tramite un sezionatore con più poli, a seconda delle disposizioni in vigore nel paese di
installazione. La rete elettrica deve essere protetta mediante fusibili idonei e devono essere utilizzati cavi con
una sezione trasversale idonea a garantire una corretta alimentazione del forno.
COLLEGAMENTO
Il forno viene fornito con un cavo di alimentazione che deve essere collegato solo a una rete elettrica con una
tensione di 220-240 VCA tra le fasi o tra la fase e il neutro. Prima di collegare il forno alla rete elettrica, è
indispensabile controllare:
- la tensione di alimentazione indicata sul misuratore;
- l’impostazione del sezionatore.
Il filo di messa a terra collegato al morsetto di terra del forno deve essere collegato al morsetto di terra della
rete elettrica.
ATTENZIONE
Prima di collegare il forno alla rete elettrica, far controllare la continuità della messa a terra della rete elettrica
ad un elettricista qualificato. Il produttore declina ogni responsabilità per eventuali incidenti o altri problemi
derivanti dal mancato collegamento a terra del forno o dal suo collegamento ad una messa a terra con una
continuità difettosa.
NOTA: poiché il forno potrebbe richiedere interventi di assistenza, è consigliabile prevedere la disponibilità di
un’ulteriore presa a muro a cui collegare il forno dopo che è stato rimosso dallo spazio in cui è stato installato.
IT 19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

Candy FCNE613X Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue