PAIRING YOUR DEVICE
1) Make sure the SZ-801 is fully charged.
2) Enable Bluetooth on your Bluetooth device (iPhone, iPad, tablet). Bluetooth
controls are typically found in the tools or settings menu. Turn on Bluetooth
connectivity and make sure your device is "visible" or "discoverable".
3) Turn on your new SZ-801 by switching the button on the back of the speaker
to "On", there will be a warning tone "power on".
4) After turning on the SZ-801, the LED lights should alternate between shining
red and blue. These signals indicate that the Speaker is in "pairing mode".
5) Choose "add new Bluetooth device" or "setup Bluetooth device" on your
device. It will search for the SZ-801.
6) As your Bluetooth device discovers possible items to connect to, it will list
their names. Select the device named SZ-801. This will connect your speaker
to your Bluetooth device. There will be a warning voice "connected" that
indicate the bluetooth is connected successfully.
7) If the pairing attempt fails or times out (roughly 3 minutes), restart both
devices and start the pairing process again (Steps 2 - 6).
8) Once paired successfully, the LED indicator lights will turn blue and blink
twice every 3 seconds.
9) If you need to pair with another bluetooth device, press the Play/Pause
button for 3 seconds, the speaker will be disconnected with the before
bluetooth device automatically, there will be a warning tone "paring", then you
can repeat the paring process again (Steps 2-6)
10) Enjoy your music wirelessly anywhere you go!
NFC FUNCTION
If your bluetooth audio device has NFC function (mostly only Samsung and
Huawei have this function), then you can skip the processes of bluetooth
paring, just need two steps to pair with bluetooth device with the speaker.
1) Enable NFC on your Bluetooth device (Huawei, Samsung). NFC controls
are typically found in the tools or settings menu. Turn on NFC and make sure
your device is "visible" or "discoverable".
2) Put your device with NFC on the right side of the speaker where the NFC
chip lies in. Then the bluetooth paring is done, and there will be words on your