ASROCK H61M-DPS Guida Rapida

1

ASRock H61M-DPS Motherboard

English

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or trans-

lated in any language, in any form or by any means, except duplication of documentation

by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identiﬁ ca-

tion or explanation and to the owners’ beneﬁ t, without intent to infringe.

Disclaimer:

Speciﬁ cations and information contained in this guide are furnished for informational use

only and subject to change without notice, and should not be constructed as a commit-

ment by ASRock. ASRock assumes no responsibility for any errors or omissions that may

appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind,

either expressed or implied, including but not limited to the implied warranties or condi-

tions of merchantability or ﬁ tness for a particular purpose. In no event shall ASRock, its

directors, ofﬁ cers, employees, or agents be liable for any indirect, special, incidental, or

consequential damages (including damages for loss of proﬁ ts, loss of business, loss of

data, interruption of business and the like), even if ASRock has been advised of the pos-

sibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published December 2012

Copyright

©

2

ASRock H61M-DPS Motherboard

Motherboard Layout

English

1 Power Fan Connector (PWR_FAN1) 14 SATA2 Connector (SATA_0)

2 ATX 12V Power Connector (ATX12V1) 15 SATA2 Connector (SATA_2)

3 1155-Pin CPU Socket 16 USB 2.0 Header (USB6_7)

4 CPU Fan Connector (CPU_FAN1) 17 USB 2.0 Header (USB4_5)

5 2 x 240-pin DDR3 DIMM Slots 18 Consumer Infrared Module Header (CIR1)

(Dual Channel: DDR3_A1, DDR3_B1) 19 COM Port Header (COM1)

6 ATX Power Connector (ATXPWR1) 20 Print Port Header (LPT1)

7 System Panel Header (PANEL1) 21 Front Panel Audio Header (HD_AUDIO1)

8 Intel H61 Chipset 22 PCI Slot (PCI1)

9 Chassis Speaker Header (SPEAKER1) 23 Chassis Intrusion Header (CI1)

10 32Mb SPI Flash 24 Clear CMOS Jumper (CLRCMOS1)

11 SATA2 Connector (SATA_3) 25 PCI Express 2.0 x1 Slot (PCIE2)

12 SATA2 Connector (SATA_1) 26 PCI Express 3.0 x16 Slot (PCIE1)

13 Chassis Fan Connector (CHA_FAN1)

Intel

H61

ATXPWR1

DDR3_A1 (64 bit, 240-pin module)

DDR3_B1 (64 bit, 240-pin module)

PCIE1

Top:

RJ-45

USB 2.0

T: USB2

B: USB3

PS2

Keyboard

USB 2.0

T: USB0

B: USB1

Top:

LINE IN

Center:

FRONT

Bottom:

MIC IN

Super

I/O

CMOS

Battery

PWR_FAN1

CPU_FAN1

H61M-DPS

LAN

PHY

1

HD_AUDIO1

AUDIO

CODEC

32Mb

BIOS

1

SPEAKER1

34

5

6

12

22

21

SATA_0

SATA_1

SATA_2

SATA_3

PS2

Mouse

CHA_FAN1

USB6_7

1

X

Fast LAN

X

Fast USB

RoHS

COM1

1

LPT1

HDLED RESET

PLED PWRBTN

PANEL1

1

X

Fast RAM

ATX12V1

USB4_5

CIR1

1

VGA1

DVI1

1

2

7

8

9

13

15

17

18

19

20

10

11

14

23

16

PCIE2

PCI1

CLRCMOS1

1

CI1

1

24

26

25

3

ASRock H61M-DPS Motherboard

English

I/O Panel

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

ACT/LINK

LED

SPEED

LED

LAN Port

1 PS/2 Mouse Port (Green) 6 USB 2.0 Ports (USB23)

* 2 LAN RJ-45 Port 7 USB 2.0 Ports (USB01)

3 Line In (Light Blue) 8 DVI-D Port

** 4 Front Speaker (Lime) 9 D-Sub Port

5 Microphone (Pink) 10 PS/2 Keyboard Port (Purple)

** To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows

®

XP:

After restarting your computer, you will ﬁ nd “Mixer” tool on your system. Please select “Mixer

ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker

and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then

reboot your system.

For Windows

®

8 / 7 / Vista

TM

:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the

system tray. Set “Speaker Conﬁ guration” to “Quadraphonic” or “Stereo”. Click “Device

advanced settings”, choose “Make front and rear output devices playbacks two different audio

streams simultaneously”, and click “ok”. Then reboot your system.

1

2

3

4

5

10

6

7

8

9

4

ASRock H61M-DPS Motherboard

1. Introduction

Thank you for purchasing ASRock H61M-DPS motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

This Quick Installation Guide contains introduction of the motherboard and step-by-

step installation guide. More detailed information of the motherboard can be found

in the user manual presented in the Support CD.

Because the motherboard speciﬁ cations and the BIOS software might be

updated, the content of this manual will be subject to change without no-

tice. In case any modiﬁ cations of this manual occur, the updated version

will be available on ASRock website without further notice. You may ﬁ nd

the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit

our website for speciﬁ c information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock H61M-DPS Motherboard (Micro ATX Form Factor)

ASRock H61M-DPS Quick Installation Guide

ASRock H61M-DPS Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

ASRock Reminds You...

To get better performance in Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

Vista

TM

64-bit, it is recommended to set the BIOS option in Storage Con-

ﬁ guration to AHCI mode. For the BIOS setup, please refer to the “User

Manual” in our support CD for details.

English

5

ASRock H61M-DPS Motherboard

English

1.2 Speciﬁ cations

Platform - Micro ATX Form Factor

- Solid Capacitor for CPU power

CPU - Supports 3

rd

and 2

nd

Generation Intel

®

Core

TM

i7 / i5 / i3 in

LGA1155 Package

- Supports Intel

®

Turbo Boost 2.0 Technology

- Supports K-Series CPU

Chipset - Intel

®

H61

- Supports Intel

®

Rapid Start Technology and Smart Connect

Technology

Memory - Dual Channel DDR3 Memory Technology

- 2 x DDR3 DIMM slots

- Supports DDR3 1600/1333/1066 non-ECC, un-buffered

memory (DDR3 1600 with Intel

®

Ivy Bridge CPU, DDR3

1333 with Intel

®

Sandy Bridge CPU)

- Max. capacity of system memory: 16GB (see CAUTION 1)

- Supports Intel

®

Extreme Memory Proﬁ le (XMP) 1.3 / 1.2 with

Intel

®

Ivy Bridge CPU

Expansion Slot - 1 x PCI Express 3.0 x16 slot (PCIE1 @ x16 mode)

* PCIE 3.0 is only supported with Intel

®

Ivy Bridge CPU. With

Intel

®

Sandy Bridge CPU, it only supports PCIE 2.0.

- 1 x PCI Express 2.0 x1 slot

- 1 x PCI slot

Graphics * Intel

®

HD Graphics Built-in Visuals and the VGA outputs can

be supported only with processors which are GPU

integrated.

- Supports Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video 2.0, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

Insider

TM

, Intel

®

HD Graphics 2500/4000

with Intel

®

Ivy Bridge CPU

- Supports Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

HD Graphics 2000/3000, Intel

®

Advanced

Vector Extensions (AVX) with Intel

®

Sandy Bridge CPU

- Pixel Shader 5.0, DirectX 11 with Intel

®

Ivy Bridge CPU.

Pixel Shader 4.1, DirectX 10.1 with Intel

®

Sandy Bridge

CPU.

- Max. shared memory 1760MB with Intel

®

Ivy Bridge CPU.

Max. shared memory 1759MB with Intel

®

Sandy Bridge

CPU.

6

ASRock H61M-DPS Motherboard

English

- Dual VGA Output: support DVI and D-Sub ports by

independent display controllers

- Supports DVI with max. resolution up to 1920x1200 @

60Hz

- Supports D-Sub with max. resolution up to 2048x1536 @

75Hz

- Supports HDCP function with DVI port

- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

with DVI port

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111E

- Supports LAN Cable Detection

- Supports Energy Efﬁ cient Ethernet 802.3az

- Supports PXE

Rear Panel I/O I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x D-Sub Port

- 1 x DVI-D Port

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

- HD Audio Jack: Line in / Front Speaker / Microphone

Connector - 4 x SATA2 3.0 Gb/s connectors, support NCQ, AHCI and

Hot Plug functions

- 1 x CIR header

- 1 x Print Port header

- 1 x COM port header

- 1 x Chassis Intrusion header

- 1 x CPU Fan connectors (4-pin)

- 1 x Chassis Fan connector (4-pin)

- 1 x Power Fan connector (3-pin)

- 24 pin ATX power connector

- 4 pin 12V power connector

- Front panel audio connector

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

BIOS Feature - 32Mb AMI UEFI Legal BIOS with GUI support

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

7

ASRock H61M-DPS Motherboard

English

- SMBIOS 2.3.1 Support

Support CD - Drivers, Utilities, AntiVirus Software (Trial Version),

CyberLink MediaEspresso 6.5 Trial, Google Chrome

Browser and Toolbar

Hardware - CPU Temperature Sensing

Monitor - Chassis Temperature Sensing

- CPU Fan Tachometer

- Chassis Fan Tachometer

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

- CPU/Chassis Fan Multi-Speed Control

- CASE OPEN detection

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS - Microsoft

®

Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

Vista

TM

64-bit / XP / XP 64-bit compliant

Certiﬁ cations - FCC, CE, WHQL

- ErP/EuP Ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking,

including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may

affect your system’s stability, or even cause damage to the components

and devices of your system. It should be done at your own risk and

expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. Due to the operating system limitation, the actual memory size

may be less than 4GB for the reservation for system usage

under Windows

®

8 / 7 / Vista

TM

/ XP. For Windows

®

OS with 64-

bit CPU, there is no such limitation. You can use ASRock XFast

RAM to utilize the memory that Windows

®

cannot use.

8

ASRock H61M-DPS Motherboard

1.3 Pin Header Easy Installation Guide

ASRock motherboard is equipped with pin headers with obvious colors which indi-

cate you to recognize the crucial headers more easily. Please refer to below illustra-

tions for the pin deﬁ nition of onboard headers. If you want to have more information

about the usage of these headers, please refer to “Jumpers Setup“ and “Onboard

Headers and Connectors“ for details.

1

GND

PRESENCE#

MIC_RET

MIC2_L

MIC2_R

OUT2_R

J_SENSE

OUT2_L

OUT_RET

Front Panel Audio Header

1

PLED+

PLED-

PWRBTN#

HDLED+

HDLED-

GND

REST#

GND

DUMMY

System Panel Header

USB 2.0 Header

1

USB_PWR

P-

P+

USB_PWR

P-

P+

GND

DUMMY

Chassis Speaker Header

1

+5V

DUMMY

SPEAKER

DUMMY

English

9

ASRock H61M-DPS Motherboard

English

1.4 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose

pin1 and pin2 are “Short” when jumper cap

is placed on these 2 pins.

Jumper Setting Description

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 23)

Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the

system parameters to default setup, please turn off the computer and unplug

the power cord from the power supply. After waiting for 15 seconds, use a

jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However,

please do not clear the CMOS right after you update the BIOS. If you need

to clear the CMOS when you just ﬁ nish updating the BIOS, you must boot up

the system ﬁ rst, and then shut it down before you do the clear-CMOS action.

Please be noted that the password, date, time and user default proﬁ le will be

cleared only if the CMOS battery is removed.

Clear CMOSDefault

If you clear the CMOS, the case open may be detected. Please adjust

the BIOS option “Clear Status” to clear the record of previous chassis

intrusion status.

10

ASRock H61M-DPS Motherboard

English

1.5 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

Serial ATA2 Connectors These four Serial ATA2

(SATA_0: see p.2, No. 13)

(SATA2) connectors support

(SATA_1: see p.2, No. 11)

SATA data cables for internal

(SATA_2: see p.2, No. 14)

storage devices. The current

(SATA_3: see p.2, No. 10)

SATA2 interface allows up to

3.0 Gb/s data transfer rate.

Serial ATA (SATA) Either end of the SATA data

Data Cable cable can be connected to the

(Optional)

SATA2 hard disk or the SATA2

connector on this motherboard.

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB4_5)

ports on the I/O panel, there

(see p.2 No. 16)

are two USB 2.0 headers on

this motherboard. Each

USB 2.0 header can support

two USB 2.0 ports.

(9-pin USB6_7)

(see p.2 No. 15)

Consumer Infrared Module Header This header can be used to

(4-pin CIR1)

connect the remote

(see p.2 No. 17)

controller receiver.

SATA_3 SATA_1

SATA_2 SATA_0

11

ASRock H61M-DPS Motherboard

English

J_SENSE

OUT2_L

1

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

Front Panel Audio Header This is an interface for front

(9-pin HD_AUDIO1)

panel audio cable that allows

(see p.2 No. 20)

convenient connection and

control of audio devices.

1. High Deﬁ nition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows

®

XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS:

Go to the "FrontMic" Tab in the Realtek Control panel. Adjust

“Recording Volume”.

System Panel Header This header accommodates

(9-pin PANEL1)

several system front panel

(see p.2 No. 7)

functions.

Connect the power switch, reset switch and system status indicator on the

chassis to this header according to the pin assignments below. Note the

positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may conﬁ gure

the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset

switch to restart the computer if the computer freezes and fails to perform a

normal restart.

12

ASRock H61M-DPS Motherboard

English

CPU Fan Connector Please connect the CPU fan

(4-pin CPU_FAN1)

cable to the connector and

(see p.2 No. 4)

match the black wire to the

ground pin.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED

is on when the system is operating. The LED keeps blinking when the sys-

tem is in S1 sleep state. The LED is off when the system is in S3/S4 sleep

state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED

is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly

consists of power switch, reset switch, power LED, hard drive activity LED,

speaker and etc. When connecting your chassis front panel module to this

header, make sure the wire assignments and the pin assign-ments are

matched correctly.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

3-Pin Fan Installation

Pin 1-3 Connected

Chassis Speaker Header Please connect the chassis

(4-pin SPEAKER 1)

speaker to this header.

(see p.2 No. 8)

Chassis and Power Fan Connectors Please connect the fan cables

(4-pin CHA_FAN1)

to the fan connectors and

(see p.2 No. 12)

match the black wire to the

ground pin.

(3-pin PWR_FAN1)

(see p.2 No. 1)

GND

+12V

CHA_FAN_SPEED

FAN_SPEED_CONTROL

PWR_FAN_SPEED

GND

+12V

GND

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

4 3 2 1

13

ASRock H61M-DPS Motherboard

English

ATX 12V Power Connector Please connect an ATX 12V

(4-pin ATX12V1)

power supply to this connector.

(see p.2 No. 2)

Chassis Intrusion Header This motherboard supports

(2-pin CI1)

CASE OPEN detection feature

(see p.2, No. 22)

that detects if the chassis cover

has been removed. This feature

requires a chassis with chassis

intrusion detection design.

1

Signal

GND

ATX Power Connector Please connect an ATX power

(24-pin ATXPWR1)

supply to this connector.

(see p.2 No. 6)

12

1

24

13

20-Pin ATX Power Supply Installation

Though this motherboard provides 24-pin ATX power connector,

it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your

power supply along with Pin 1 and Pin 13.

12

1

24

13

Print Port Header This is an interface for print

(25-pin LPT1)

port cable that allows

(see p.2 No. 19)

convenient connection of printer

devices.

1

AFD#

ERROR#

PINIT#

GND

SLIN#

STB#

SPD0

SPD1

SPD2

SPD3

SPD4

SPD5

SPD6

SPD7

ACK#

BUSY

PE

SLCT

Serial port Header This COM1 header supports a

(9-pin COM1)

serial port module.

(see p.2 No. 18)

14

ASRock H61M-DPS Motherboard

2. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up

the computer, please press <F2> or <Del> during the Power-On-Self-Test (POST)

to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you

wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl>

+ <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS

Setup program is designed to be user-friendly. It is a menu-driven program, which

allows you to scroll through its various sub-menus and to select among the prede-

termined choices. For the detailed information about BIOS Setup, please refer to the

User Manual (PDF ﬁ le) contained in the Support CD.

3. Software Support CD information

This motherboard supports various Microsoft

®

Windows

®

operating systems: 8 / 8

64-bit / 7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit / XP / XP 64-bit. The Support CD that

came with the motherboard contains necessary drivers and useful utilities that will

enhance motherboard features. To begin using the Support CD, insert the CD into

your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is

enabled in your computer. If the Main Menu does not appear automatically, locate

and double-click on the ﬁ le “ASSETUP.EXE” from the BIN folder in the Support CD

to display the menus.

English

15

ASRock H61M-DPS Motherboard

Speziﬁ kationen

Plattform - Micro ATX-Formfaktor

- Festkondensator für CPU-Leistung

CPU - Unterstützt Intel

®

Core

TM

i7- / i5- / i3-Prozessoren der 3ten

und 2ten Generation im LGA1155-Package

- Unterstützt Intel

®

Turbo Boost 2.0-Technologie

- Unterstützt CPU der K-Serie

Chipsatz - Intel

®

H61

- Unterstützt Intel

®

Rapid Start Technology und Smart

Connect Technology

Speicher - Unterstützung von Dual-Kanal-Speichertechnologie

- 2 x Steckplätze für DDR3

- Unterstützt DDR3 1600/1333/1066 non-ECC, ungepufferter

Speicher (DDR3 1600 mit Intel

®

Ivy Bridge-Prozessor,

DDR3 1333 mit Intel

®

Sandy Bridge-Prozessor)

- Max. Kapazität des Systemspeichers: 16GB

- Unterstützt Intel

®

Extreme Memory Proﬁ le (XMP)1.3/1.2 mit

Intel

®

Ivy Bridge-Prozessor

Erweiterungs- - 1 x PCI Express 3.0 x16-Steckplatz (PCIE1 für x16-Modus)

steckplätze * PCIE 3.0 wird nur mit Intel

®

Ivy Bridge-Prozessor

unterstützt. Mit Intel

®

Sandy Bridge-Prozessor wird nur

PCIE 2.0 unterstützt.

- 1 x PCI Express 2.0 x1-Steckplätze

- 1 x PCI-Steckplätze

Onboard-VGA * Integrierte Intel

®

HD-Graﬁ kdarstellungen und die VGA-

Ausgänge können nur durch GPU-integrierte Prozessoren

unterstützt werden.

- Unterstützt hochauﬂ ösende integrierte Intel

®

-Graﬁ klösungen:

Intel

®

Quick-Sync-Video 2.0, Intel

®

InTru

TM

3D, Intel

®

Clear-

Video-Technik (HD), Intel

®

Insider

TM

, Intel

®

HD Graphics

2500/4000 mit Intel

®

Ivy Bridge-Prozessor

- Unterstützt hochauﬂ ösende integrierte Intel

®

-Graﬁ klösungen:

Intel

®

Quick-Sync-Video, Intel

®

InTru

TM

3D, Intel

®

Clear-

Video-Technik (HD), Intel

®

HD Graphics 2000/3000, Intel

®

Advanced Vector Extensions (AVX) mit Intel

®

Sandy Bridge-

Prozessor

- Pixel Shader 5.0, DirectX 11 mit Intel

®

Ivy Bridge-Prozessor,

Pixel Shader 4.1, DirectX 10.1 mit Intel

®

Sandy Bridge-

Prozessor

- Maximal gemeinsam genutzter Speicher 1760MB mit Intel

®

Deutsch

16

ASRock H61M-DPS Motherboard

Ivy Bridge-Prozessor. Maximal gemeinsam genutzter

Speicher 1759MB mit Intel

®

Sandy Bridge-Prozessor.

- Doppel-VGA Ausgabe: unterstützt DVI und D-Sub Ports

durch unabhängige Bildschirmanzeige Kontrolleure

- Unterstützt DVI mit einer maximalen Auﬂ ösung von

1920 x 1200 bei 60 Hz

- Unterstützt D-Sub mit einer maximalen Auﬂ ösung von

2048 x 1536 bei 75 Hz

- Unterstützt HDCP-Funktion mit DVI-Port

- Unterstutzt 1080p Blu-ray (BD) / HD-DVD-Wiedergabe mit

DVI-Port

Audio - 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111E

- Unterstützt LAN-Kabelerkennung

- Unterstützt energieefﬁ zientes Ethernet 802.3az

- Unterstützt PXE

E/A-Anschlüsse I/O Panel

an der - 1 x PS/2-Mausanschluss

Rückseite - 1 x PS/2-Tastaturanschluss

- 1 x D-Sub port

- 1 x DVI-D port

- 4 x Standard-USB 2.0-Anschlüsse

- 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED

LED)

- HD Audiobuchse: Audioeingang / Lautsprecher vorne /

Mikrofon

Anschlüsse - 4 x SATA2 3,0 GB/s-Anschlüsse, unterstützen NCQ-, AHCI-

und „Hot Plug“ (Hot-Plugging)- Funktionen

- 1 x

Consumer Infrared-Modul-Header

- 1 x Druckerport-Anschlussleiste

- 1 x COM-Anschluss-Header

- 1 x Verteiler für Gehäuseeindringversuche

- 1 x CPUlüfter-Anschluss (4-pin)

- 1 x Gehäuselüfter-Anschluss (4-pin)

- 1 x Stromlüfter-Anschluss (3-pin)

- 24-pin ATX-Netz-Header

- 4-pin anschluss für 12V-ATX-Netzteil

- Anschluss für Audio auf der Gehäusevorderseite

- 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher

USB 2.0-Anschlüsse)

Deutsch

17

ASRock H61M-DPS Motherboard

BIOS - 32Mb AMIs Legal BIOS UEFI mit GUI-Unterstützung

- Unterstützung für “Plug and Play”

- ACPI 1.1-Weckfunktionen

- JumperFree-Übertaktungstechnologie

- SMBIOS 2.3.1

CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (version d’évaluation),

CyberLink MediaEspresso 6.5 Trial, Google Chrome

Browser und Toolbar

Hardware Monitor - Überwachung der CPU-Temperatur

- Motherboardtemperaturerkennung

- Drehzahlmessung für CPUlüfter

- Drehzahlmessung für Gehäuselüfter

- Geräuscharmer CPUlüfter (ermöglicht die au tomatische

Anpassung der Gehäuselüftergeschwindigkeit durch

CPU Temperatur)

- Mehrstuﬁ ge Geschwindigkeitsteuerung für CPU-/

Gehäuselüfter

- GEHÄUSE OFFEN-Erkennung

- Spannungsüberwachung: +12V, +5V, +3.3V, Vcore

Betriebssysteme - Unterstützt Microsoft

®

Windows

®

8 / 8 64-Bit / 7 / 7 64-Bit /

Vista

TM

/ Vista

TM

64-Bit / XP / XP 64-Bit

Zertiﬁ zierungen - FCC, CE, WHQL

- Gemäß Ökodesign-Richtlinie (ErP/EuP) (Stromversorgung

gemäß Ökodesign-Richtlinie (ErP/EuP) erforderlich)

* Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website:

http://www.asrock.com

Deutsch

18

ASRock H61M-DPS Motherboard

Spéciﬁ cations

Format - Facteur de forme Micro ATX

- Condensateur résistant pour alimentation de processeur

CPU - Prend en charge les processeurs Intel

®

Core

TM

i7 / i5 / i3

2ème et 3ème génération sur socket LGA1155

- Prend en charge la technologie Intel

®

Turbo Boost 2.0

- Prise en charge des unités centrales de série K

Chipsets - Intel

®

H61

- Prend en charge les technologies Intel

®

Rapid Start et Smart

Connect

Mémoire - Compatible avec la Technologie de Mémoire à Canal

Double

- 2 x slots DIMM DDR3

- Supporter DDR3 1600/1333/1066 non-ECC, sans

amortissement mémoire (DDR3 1600 avec CPU Intel

®

Ivy

Bridge, DDR3 1333 avec CPU Intel

®

Sandy Bridge)

- Capacité maxi de mémoire système: 16GB

- Prend en charge le proﬁ l de mémoire extrême Intel

®

(XMP)

1.3/1.2 avec processeur Intel

®

Ivy Bridge CPU

Slot d’extension - 1 x slot PCI Express 3.0 x16 (PCIE1 @ mode x16)

* PCIE 3.0 n’est pris en charge qu’avec le processeur Intel

®

Ivy Bridge. Avec le processeur Intel

®

Sandy Bridge, seul

PCIE 2.0 est pris en charge.

- 1 x slot PCI Express 2.0 x1

- 1 x slot PCI

VGA sur carte * Intel

®

HD Graphics avec visuels intégrés (Built-in Visuals) et

les sorties VGA sont uniquement pris en charge par les

processeurs à GPU intégré.

- Supporte Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video 2.0, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

Insider

TM

, Intel

®

HD Graphics 2500/4000

avec processeur Intel

®

Ivy Bridge CPU

- Supporte Intel

®

HD Graphics Built-in Visuals: Intel

®

Quick

Sync Video, Intel

®

InTru

TM

3D, Intel

®

Clear Video HD

Technology, Intel

®

HD Graphics 2000/3000, Intel

®

Advanced

Vector Extensions (AVX) avec processeur Intel

®

Sandy

Bridge CPU

- Pixel Shader 5.0, DirectX 11 avec CPU Intel

®

Ivy Bridge,

Pixel Shader 4.1, DirectX 10.1 avec CPU Intel

®

Sandy

Bridge

Français

19

ASRock H61M-DPS Motherboard

Français

- Mémoire partagée max 1760MB avec processeur Intel

®

Ivy

Bridge CPU. Mémoire partagée max 1759MB avec

processeur Intel

®

Sandy Bridge CPU.

- Output de VGA Duel: supporter DVI et D-Sub ports par

les controleurs de display independents

- Prend en charge le DVI avec une résolution maximale

jusqu’à 1920x1200 @ 60Hz

- Prend en charge le D-Sub avec une résolution maximale

jusqu’à 2048x1536 @ 75Hz

- Prise en charge de la fonction HDCP avec port DVI

- Supporter 1080p Blu-ray(BD)/ lecteur de HD-DVD avec

port DVI

Audio - 5.1 Son haute déﬁ nition de CH

(codec audio Realtek ALC662)

LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Realtek RTL8111E

- Prise en charge de la détection de câble LAN

- Prend en charge la norme Energy Efﬁ cient Ethernet

(Ethernet à efﬁ cacité énergétique) 802.3az

- Supporte PXE

Panneau arrière I/O Panel

- 1 x port souris PS/2

- 1 x port clavier PS/2

- 1 x port D-Sub

- 1 x port DVI-D

- 4 x ports USB 2.0 par défaut

- 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et

LED VITESSE)

- Prise HD Audio: Entrée Ligne / Haut-parleur frontal /

Microphone

Connecteurs - 4 x connecteurs SATA2, prennent en charge un taux de

transfert de données pouvant aller jusqu’à 3.0Go/s,

supporte NCQ, AHCI et « Hot Plug » (Branche ment à

chaud)

- 1 x

Barrette pour module à infrarouges grand public

- 1 x embase de port d’impression

- 1 x En-tête de port COM

- 1 x Embase d’intrusion châssis

- 1 x Connecteur pour ventilateur de CPU (br. 4)

- 1 x Connecteur pour ventilateur de Châssis (br. 4)

- 1 x Connecteur pour ventilateur de pouvoir (br. 3)

20

ASRock H61M-DPS Motherboard

- br. 24 connecteur d’alimentation ATX

- br. 4 connecteur d’alimentation 12V ATX

- Connecteur audio panneau avant

- 2 x En-tête USB 2.0 (prendre en charge 4 ports USB 2.0

supplémentaires)

BIOS - 32Mb AMI UEFI Legal BIOS avec support GUI

- Support du “Plug and Play”

- Compatible pour événements de réveil ACPI 1.1

- Gestion jumperless

- Support SMBIOS 2.3.1

CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (version d’évaluation),

CyberLink MediaEspresso 6.5 Trial, Google Chrome

Browser et Toolbar

Surveillance - Contrôle de la température CPU

système - Mesure de température de la carte mère

- Tachéomètre ventilateur processeur

- Tachéomètre ventilateur châssis

- Ventilateur silencieux pour unité centrale (permet le réglage

automatique de la vitesse du ventilateur pour châssis, selon

la température de l’unité centrale)

- Commande de ventilateur CPU/châssis à plusieurs vitesses

- Détection d’OUVERTURE DE BOÎTIER

- Monitoring de la tension: +12V, +5V, +3.3V, Vcore

OS - Microsoft

®

Windows

®

8 / 8 64-bit / 7 / 7 64-bit / Vista

TM

/

Vista

TM

64-bit / XP / XP 64-bit

Certiﬁ cations - FCC, CE, WHQL

- Prêt pour ErP/EuP (alimentation Prêt pour ErP/EuP requise)

* Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web:

http://www.asrock.com

Français

La pagina si sta caricando...

ASROCK H61M-DPS Guida Rapida

ASROCK H61M-DPS Guida Rapida

Documenti correlati

Altri documenti