Sony CDX-GT360 Istruzioni per l'uso

Categoria
Lettore CD
Tipo
Istruzioni per l'uso
Operating Instructions
2-886-504-41 (1)
GB
CDX-GT360
To cancel the demonstration (DEMO) display, see page 10.
©
2006 Sony Corporation
FM
/
MW/SW
Compact Disc Player
2
Warning if your car’s ignition has no
ACC position
Be sure to set the Auto Off function (page 10).
The unit will shut off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain.
If you do not set the Auto Off function, press
and hold (OFF) until the display disappears
each time you turn the ignition off.
For installation and connections, see the
supplied installation/connections manual.
This label is located on the bottom of the
chassis.
Microsoft, Windows Media,
and the Windows logo are
trademarks or registered
trademarks of Microsoft
Corporation in the United States and/or other
countries.
3
Table of Contents
Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4
Preparing the card remote commander . . . . . . . 4
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 5
Detaching the front panel . . . . . . . . . . . . . . . . . 5
Attaching the front panel . . . . . . . . . . . . . . . 5
Location of controls and basic
operations
Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Card remote commander RM-X151 . . . . . . . 6
CD
Display items . . . . . . . . . . . . . . . . . . . . . . . . 8
Repeat and shuffle play. . . . . . . . . . . . . . . . . 8
Radio
Storing and receiving stations . . . . . . . . . . . . . . 8
Storing automatically — BTM . . . . . . . . . . . 8
Storing manually. . . . . . . . . . . . . . . . . . . . . . 8
Receiving the stored stations . . . . . . . . . . . . 8
Tuning automatically . . . . . . . . . . . . . . . . . . 9
Other functions
Changing the sound settings . . . . . . . . . . . . . . . 9
Adjusting the sound characteristics
— BAL/FAD/SUB. . . . . . . . . . . . . . . . . . . . 9
Customizing the equalizer curve
— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting setup items — SET . . . . . . . . . . . . 10
Using optional equipment. . . . . . . . . . . . . . . . 10
Auxiliary audio equipment. . . . . . . . . . . . . 10
CD/MD changer . . . . . . . . . . . . . . . . . . . . . 11
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Notes on discs . . . . . . . . . . . . . . . . . . . . . . 12
About MP3/WMA files . . . . . . . . . . . . . . . 12
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Removing the unit. . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 15
Error displays/Messages. . . . . . . . . . . . . . . 16
4
Welcome !
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy your drive with the
following functions.
CD playback
You can play CD-DA (also containing CD
TEXT*) and CD-R/CD-RW (MP3/WMA files
also containing Multi Session (page 12)).
Radio reception
You can store up to 6 stations per band (FM1,
FM2, FM3, MW, SW1 and SW2).
BTM (Best Tuning Memory): The unit selects
strong signal stations and stores them.
Sound adjustment
EQ3 stage2: You can choose any one of 7
preset equalizer curves.
Optional unit operation
You can also control optional CD/MD
changers.
Auxiliary equipment connection
An AUX input jack on the front of the unit
allows connection of a portable audio device.
* A CD TEXT disc is a CD-DA that includes
information such as disc, artist and track name.
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Preparing the card remote
commander
Before using the card remote commander for the
first time, remove the insulation film.
Type of discs Label on the disc
CD-DA
MP3
WMA
RESET
button
5
Setting the clock
The clock uses a 12-hour digital indication.
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until “CLOCK-ADJ” appears.
3 Press (SEEK) +.
The hour indication flashes.
4 Rotate the volume control dial to set
the hour and minute.
To move the digital indication, press (SEEK)
–/+.
5 Press the select button.
The setup is complete and the clock starts.
To display the clock, press (DSPL). Press
(DSPL) again to return to the previous display.
With the card remote commander
In step 4, to set the hour and minute, press M or m.
Detaching the front panel
You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1 Press (OFF).
The unit is turned off.
2 Press , then pull it off towards you.
Notes
Do not drop or put excessive pressure on the front
panel and display window.
Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in a parked
car or on a dashboard/rear tray.
Attaching the front panel
Engage part A of the front panel with part B of
the unit, as illustrated, and push the left side into
position until it clicks.
Note
Do not put anything on the inner surface of the front
panel.
B
A
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
C Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
D SOURCE button
To power on; change the source (Radio/CD/
MD*
1
/AUX).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G AUX input jack 10
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I BTM button 8
To start the BTM function (press and hold).
J (front panel release) button 5
OFF
BTM
DSPL
MODE
SCRL
PUSH SELECT
SEEK
SEEK
PAUSE
ALBMDIM REP SHUF
EQ3
AUX
SOURCE
123456
1 2
q
j
q
h
4 5 8673
CDX-GT360
q
a
q
d
q
;
9 q
s
q
f
q
g
OFF
DSPL
SCRL
SEL
SOURCE
MODE
132
465
ATT
VOL
+
+
4
wa
qd
1
qj
qk
qf
w;
ql
wd
ws
7
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L Receptor for the card remote
commander
M MODE button 8, 11
To select the radio band (FM/MW/SW);
select the unit*
2
.
N DSPL (display)/DIM (dimmer) button
8
To change display items (press); change the
display brightness (press and hold).
O RESET button (located behind the front
panel) 4
P Number buttons
CD/MD*
1
:
(1)/(2): ALBM –/+*
3
*
4
To skip albums (press); skip albums
continuously (press and hold).
(3): REP 8
(4): SHUF 8
(6): PAUSE*
5
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q SCRL (scroll) button 8
To scroll the display item.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qk < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
ql VOL (volume) +/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wa SEL (select) button
The same as the select button on the unit.
ws M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) on the unit.
wd Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected.
*3 When an MP3/WMA is played.
*4 If the changer is connected, the operation is
different, see page 11.
*5 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
8
CD
For details on selecting a CD/MD changer, see
page 11.
Display items
A WMA/MP3 indication
B Source
C Track number/Elapsed playing time, Disc/
artist name, Album number*
1
, Album name,
Track name, Text information*
2
, Clock
*1 Album number is displayed only when the album is
changed.
*2 When playing an MP3, ID3 tag is displayed, and
when playing a WMA, WMA tag is displayed.
To change display items C, press (DSPL);
scroll display items C, press (SCRL) or set
A.SCRL-ON” (page 10).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3/
WMA, see page 12.
Repeat and shuffle play
1 During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
* When an MP3/WMA is played.
To return to normal play mode, select “ OFF”
or “SHUF OFF.
Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1 Press (SOURCE) repeatedly until
“TUNER” appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW, SW1 or SW2.
2 Press and hold (BTM) until “BTM”
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
Storing by the setup menu
1 After step 1 above, press and hold the select
button.
The setup display appears.
2 Press the select button repeatedly until “BTM”
appears.
3 Press (SEEK) +.
Storing manually
1 While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
“MEM” appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Receiving the stored stations
1 Select the band, then press a number
button ((1) to (6)).
Select To play
TRACK track repeatedly.
ALBUM* album repeatedly.
SHUF ALBUM* album in random order.
SHUF DISC disc in random order.
9
Tuning automatically
1 Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) /+ to locate the
approximate frequency, then press (SEEK) /+
repeatedly to fine adjust to the desired frequency
(manual tuning).
Other functions
Changing the sound settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1 Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*
1
t MID*
1
t HI*
1
t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
2
t AUX*
3
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB”
(page 10).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3 When AUX source is activated (page 10).
2 Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 2, to adjust the selected item, press <, M, ,
or m.
Customizing the equalizer curve
— EQ3
“CUSTOM” of EQ3 allows you to make your
own equalizer settings.
1 Select a source, then press (EQ3)
repeatedly to select “CUSTOM.
2 Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3 Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
continue to next page t
10
Tip
Other equalizer types are also adjustable.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.
Adjusting setup items — SET
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until the desired item appears.
3 Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
4 Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
z” indicates the default settings.
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3 Connect to the unit.
CLOCK-ADJ (Clock Adjust) (page 5)
BEEP
To set “BEEP-ON” (
z) or “BEEP-OFF.
AUX-A*
1
(AUX Audio)
To turn the AUX source display “AUX-A-ON”
(
z) or “AUX-A-OFF” (page 10).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off,
A.OFF-NO” (
z), “A.OFF-30S (Seconds),
A.OFF-30M (Minutes)” orA.OFF-60M
(Minutes).
SUB/REAR*
1
To switch the audio output.
–“SUB-OUT (
z): to output to a subwoofer.
“REAR-OUT”: to output to a power amplifier.
B.OUT (Black Out)
To turn off the illumination automatically for
any source (for example, during CD playback/
radio reception, etc.).
“B.OUT-ON”*
2
: to turn off the illumination if
no operation is performed for 5 seconds.
– “B.OUT-OFF” (
z): to deactivate the Black Out
function.
To bring the light back on, press any button.
DEMO*
1
(Demonstration)
To set “DEMO-ON” (z) or “DEMO-OFF.
DIM (Dimmer)
To change the brightness of the display.
“DIM-ON”: to dim the display.
–“DIM-OFF (
z): to deactivate the dimmer.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
A.SCRL-ON” (
z): to scroll.
A.SCRL-OFF”: to not scroll.
LOCAL (Local Seek Mode)
“LOCAL-ON”: to only tune into stations with
stronger signals.
–“LOCAL-OFF (
z): to tune normal reception.
MONO*
3
(Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
“MONO-ON”: to hear stereo broadcast in
monaural.
“MONO-OFF” (
z): to hear stereo broadcast in
stereo.
LPF*
4
(Low Pass Filter)
To select the subwoofer cut-off frequency: “LPF
OFF” (
z), “LPF125Hz” or “LPF 78Hz.
BTM (page 8)
*1 When the unit is turned off.
*2 When the black out function is activated, the unit
cannot be operated with the card remote
commander.
*3 When FM is received.
*4 When the audio output is set to “SUB.
11
* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until “AUX”
appears.
AUX FRONT IN” appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until AUX”
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
Skipping albums and discs
1 During playback, press (1)/(2) (ALBM –/+).
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
*1 When one or more CD/MD changers are
connected.
*2 When one or more CD changers, or two or more
MD changers are connected.
To return to normal play mode, select “ OFF”
or “SHUF OFF.
Tip
“SHUF ALL” will not shuffle tracks between CD units
and MD changers.
AUX
AUX
Connecting cord*
(not supplied)
Disc number
Unit number
To skip Press (1)/(2) (ALBM –/+)
album and release (hold for a
moment).
album
continuously
within 2 seconds of first
releasing.
discs repeatedly.
discs
continuously
then, press again within 2
seconds and hold.
Select To play
DISC*
1
disc repeatedly.
SHUF
CHANGER*
1
tracks in the changer in random
order.
SHUF ALL*
2
tracks in all units in random
order.
12
Additional Information
Precautions
If your car has been parked in direct sunlight,
allow the unit to cool off before operating it.
Power antenna (aerial) will extend automatically
while the unit is operating.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit will
not operate properly. In such a case, remove the disc
and wait for about an hour until the moisture has
evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
Notes on discs
To keep a disc clean, do not touch its surface.
Handle the disc by its edge.
Keep your discs in their cases or disc magazines
when not in use.
Do not subject discs to heat/high temperature.
Avoid leaving them in a parked car or on a
dashboard/rear tray.
Do not attach labels, or use discs with sticky ink/
residue. Such discs may stop spinning when used,
causing a malfunction, or may ruin the disc.
Do not use any discs with labels or stickers
attached.
The following malfunctions may result from using
such discs:
Inability to eject a disc (due to a label or sticker
peeling off and jamming the eject mechanism).
Inability to read audio data correctly (e.g.,
playback skipping, or no playback) due to heat
shrinking of a sticker or label causing a disc to
warp.
Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do not
use such discs.
You cannot play 8 cm (3
1
/4 in) CDs.
Before playing, clean the discs
with a commercially available
cleaning cloth. Wipe each disc
from the center out. Do not use
solvents such as benzine,
thinner, commercially available
cleaners, or antistatic spray
intended for analog discs.
Notes on CD-R/CD-RW discs
Some CD-Rs/CD-RWs (depending on the
equipment used for its recording or the condition
of the disc) may not play on this unit.
You cannot play a CD-R/a CD-RW that is not
finalized.
Music discs encoded with copyright
protection technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed by
some record companies. Please be aware that among
those discs, there are some that do not conform to
the CD standard and may not be playable by this
product.
About MP3/WMA files
MP3, which stands for MPEG-1 Audio Layer-3, is a
music file compression format standard. It
compresses audio CD data to approximately 1/10 of
its original size.
WMA, which stands for Windows Media Audio, is
another music file compression format standard. It
compresses audio CD data to approximately 1/22*
of its original size.
* only for 64 kbps
The unit is compatible with the ISO 9660 level 1/
level 2 format, Joliet/Romeo in the expansion
format, and Multi Session.
The maximum number of:
– folders (albums): 150 (including root and empty
folders).
MP3/WMA files (tracks) and folders contained
in a disc: 300 (if a folder/file names contain
many characters, this number may become less
than 300).
displayable characters for a folder/file name is
32 (Joliet), or 64 (Romeo).
ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to
MP3 only. ID3 tag is 15/30 characters (1.0 and
1.1), or 63/126 characters (2.2, 2.3 and 2.4).
WMA tag is 63 characters.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However,
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
13
Playback order of MP3/WMA files
Notes
When naming an MP3 file/WMA file, be sure to add
the file extension “.mp3”/“.wma” to the file name.
During playback of a VBR (variable bit rate) MP3/
WMA file or fast-forward/reverse, elapsed playing
time may not display accurately.
When the disc is recorded in Multi Session, only the
first track of the first session format is recognized
and played (any other format is skipped). The
priority of the format is CD-DA and MP3/WMA.
– When the first track is a CD-DA, only CD-DA of the
first session is played.
– When the first track is not a CD-DA, an MP3/WMA
session is played. If the disc has no data in any of
these formats, “NO MUSIC” is displayed.
Notes on MP3
Be sure to finalize the disc before using on the unit.
If you play a high-bit-rate MP3, such as 320 kbps,
sound may be intermittent.
Notes on WMA
Files made with lossless compression are not
playable.
Files protected by copyright are not playable.
If you have any questions or problems concerning
your unit that are not covered in this manual, consult
your nearest Sony dealer.
Maintenance
Replacing the lithium battery of the
card remote commander
Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
card remote commander becomes shorter.
Replace the battery with a new CR2025 lithium
battery. Use of any other battery may present a
risk of fire or explosion.
Notes on the lithium battery
Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
Wipe the battery with a dry cloth to assure a good
contact.
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
Fuse replacement
When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.
Folder
(album)
MP3/WMA file
(track)
MP3/WMA
continue to next page t
1
2
+ side up
c
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
Fuse (10A)
14
Cleaning the connectors
The unit may not function properly if the connectors
between the unit and the front panel are not clean. In
order to prevent this, detach the front panel (page 5)
and clean the connectors with a cotton swab. Do not
apply too much force. Otherwise, the connectors
may be damaged.
Notes
For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
Never touch the connectors directly with your fingers
or with any metal device.
Removing the unit
1 Remove the protection collar.
1 Detach the front panel (page 5).
2 Engage the release keys together with the
protection collar.
3 Pull out the release keys to remove the
protection collar.
2 Remove the unit.
1Insert both release keys simultaneously
until they click.
2Pull the release keys to unseat the unit.
3Slide the unit out of the mounting.
Specifications
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Tuner section
FM
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 10.7 MHz/450 kHz
Usable sensitivity: 9 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)
Harmonic distortion at 1 kHz: 0.5 % (stereo),
0.3 % (mono)
Separation: 35 dB at 1 kHz
Frequency response: 30 – 15,000 Hz
MW/SW
Tuning range:
MW: 531 – 1,602 kHz
SW1: 2,940 – 7,735 kHz
SW2: 9,500 – 18,135 kHz
(except for 10,140 – 11,575 kHz)
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 10.7 MHz/450 kHz
Sensitivity: 30 µV
Main unit
Back of the front
panel
Orient the release
keys as shown.
Hook facing
inwards.
15
Power amplifier section
Outputs: Speaker outputs (sure seal connectors)
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W × 4 (at 4 ohms)
General
Output:
Audio outputs terminal (sub/rear switchable)
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
BUS control input terminal
BUS audio input terminal
Antenna (aerial) input terminal
AUX input jack (stereo mini jack)
Tone controls:
Low: ±10 dB at 60 Hz (XPLOD)
Mid: ±10 dB at 1 kHz (XPLOD)
High: ±10 dB at 10 kHz (XPLOD)
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions: Approx. 178 × 50 × 179 mm
(7
1
/8 × 2 × 7
1
/8 in) (w/h/d)
Mounting dimensions: Approx. 182 × 53 × 162 mm
(7
1
/4 × 2
1
/8 × 6
1
/2 in) (w/h/d)
Mass: Approx. 1.2 kg (2 lb 11 oz)
Supplied accessories:
Card remote commander: RM-X151
Parts for installation and connections (1 set)
Optional accessories/equipment:
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
CD changer (10 discs): CDX-757MX, CDX-656X
Source selector: XA-C40
AUX-IN selector: XA-300
Interface adaptor for iPod: XA-110IP
Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
information.
Design and specifications are subject to change
without notice.
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check the
connection and operating procedures.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
Halogenated flame retardants are not used in the
certain printed wiring boards.
Halogenated flame retardants are not used in
cabinets.
Paper is used for the packaging cushions.
VOC (Volatile Organic Compound)-free vegetable
oil based ink is used for printing the carton.
General
No power is being supplied to the unit.
• Check the connection. If everything is in order, check
the fuse.
• If the unit is turned off and the display disappears, it
cannot be operated with the remote commander.
t Turn on the unit.
The power antenna (aerial) does not extend.
The power antenna (aerial) does not have a relay box.
No sound.
• The volume is too low.
• The ATT function is activated.
• The position of the fader control “FAD” is not set for
a 2-speaker system.
• The CD changer is incompatible with the disc format
(MP3/WMA).
t Play back with a Sony MP3 compatible CD
changer, or this unit.
No beep sound.
• The beep sound is canceled (page 10).
• An optional power amplifier is connected and you are
not using the built-in amplifier.
The contents of the memory have been erased.
• The RESET button has been pressed.
t Store again into the memory.
• The power supply lead or battery has been
disconnected.
• The power supply lead is not connected properly.
Stored stations and correct time are erased.
The fuse has blown.
Makes noise when the position of the ignition
is switched.
The leads are not matched correctly with the cars
accessory power connector.
The display disappears from/does not appear
in the display window.
• The dimmer is set “DIM-ON” (page 10).
• The display disappears if you press and hold (OFF).
t Press and hold (OFF) on the unit until the
display appears.
• The connectors are dirty (page 14).
The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates
after turning off the unit.
t Turn off the unit.
The display disappears while the unit is
operating.
The Black Out function is set to on (page 10).
continue to next page t
16
Error displays/Messages
Card remote commander operation is not
possible.
• If the Black Out function is activated (no lighting),
card remote commander operation is not possible
(page 10).
Make sure the insulation film has been removed
(page 4).
CD/MD playback
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not playback.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use (page 12).
MP3/WMA files cannot be played back.
The disc is incompatible with the MP3/WMA format
and version (page 12).
MP3/WMA files take longer to play back than
others.
The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in Multi Session.
– a disc to which data can be added.
The display items do not scroll.
• For discs with very many characters, those may not
scroll.
• “A.SCRL” is set to “OFF”.
tSet “A.SCRL-ON” (page 10) or press (SCRL).
The sound skips.
• Installation is not correct.
tInstall the unit at an angle of less than 45° in a
sturdy part of the car.
• Defective or dirty disc.
The operation buttons do not function.
The disc will not eject.
Press the RESET button (page 4).
Radio reception
The stations cannot be received.
The sound is hampered by noises.
Connect a power antenna (aerial) control lead (blue)
or accessory power supply lead (red) to the power
supply lead of a car’s antenna (aerial) booster (only
when your car has built-in FM/MW/SW antenna
(aerial) in the rear/side glass).
Check the connection of the car antenna (aerial).
• The auto antenna (aerial) will not go up.
tCheck the connection of the power antenna
(aerial) control lead.
Check the frequency.
Preset tuning is not possible.
Store the correct frequency in the memory.
• The broadcast signal is too weak.
Automatic tuning is not possible.
Setting of the local seek mode is not correct.
t Tuning stops too frequently:
Set “LOCAL-ON” (page 10).
t Tuning does not stop at a station:
Set “MONO-ON” (page 10).
The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “ST” indication
flashes.
• Tune in the frequency accurately.
The broadcast signal is too weak.
t Set “MONO-ON” (page 10).
An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
t Set “MONO-OFF” (page 10).
BLANK*
1
Tracks have not been recorded on the MD.*
2
t Play an MD with recorded tracks.
ERROR*
1
The disc is dirty or inserted upside down.*
2
t Clean or insert the disc correctly.
A blank disc has been inserted.
The disc cannot play due to a problem.
t Insert another disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation guide manual of this model to
check the connection.
LOAD
The changer is loading the disc.
t Wait until loading is complete.
L. SEEK +/
The local seek mode is on during automatic tuning.
NO DISC
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO INFO
Text information is not written in the MP3/WMA file.
NO MAG
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
NO MUSIC
The disc is not a music file.
t Insert a music CD in this unit or MP3 playable
changer.
NO NAME
A disc/album/track name is not written in the track.
NOT READ
The disc information has not been read by the unit.
t Load the disc, then select it on the list.
17
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
NOTREADY
The lid of the MD changer is open or the MDs are not
inserted properly.
tClose the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
tCheck the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
READ
The unit is reading all track and album information on
the disc.
tWait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
RESET
The CD unit and CD/MD changer cannot be operated
due to a problem.
tPress the RESET button (page 4).
“” or “”
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
“”
The character cannot be displayed with the unit.
*1 If an error occurs during playback of a CD or MD,
the disc number of the CD or MD does not appear
in the display.
*2 The disc number of the disc causing the error
appears in the display.
±∑
NO NAME
ÆX« ÁbA tu „«d —œ „«dØÂu¬Øpœ ÂU p
NOT READ
ÆX« ÁbA Áb«u ÁU~œ ju pœ Uö«
TXO ÈË— d «— ʬ fá ¨bOM È—«cÖ—U «— pœ
ÆbOM »U«
NOTREADY
ÁbMM iuF ‘uÄ—œMD U X« “U MD`O —uD U
Æb« ÁbA œ—«Ë
T U bbM «— ‘uÄ—œMDÆbOM œ—«Ë `O —uD «— U
OFFSET
ÆbU t«œ œuË vK«œ œdJKL ¡u p X« sJL
TtH ÈË— d UD d~UA dÖ« ÆbOM vMO“U «— ‰UB«
vu ÁbMËd sdJœe U ¨bU v vU gUL
Sony
ÆbOUL —uA œu
READ
ÈË— d Âu¬ Ë „«d Uö« ÂUL Êb«u ‰U —œ ÁU~œ
ÆbU v pœ
TŸËd —Uœu —uD gÄ Ë œu ÂUL Êb«u U bOM d
“« dAO X« sJL ʬ ¨pœ —UU t t Æœu v
ÆbAJ ‰u tIOœ p
RESET
ÁU~œCD ÁbMM iuF Ë CD/MDt UM bM«u vL
Æbu tdÖ —UJ vKJA
T tLœRESETÆ©¥ tH® bOœ —UA «—
"" U ""
ÊUUÄ U «b« t UL ¨uK t ld U s— VI sO —œ
ÆbËd gOÄ s« “« gO bO«u vL Ë b« ÁbO— pœ
""
Æœu Áœ«œ gUL ÁU~œ ju b«u vL d«—U
*±
p gÄ sO —œ dÖ«
CD
U
MD
¨bUO ‚UH« UD p
pœ Á—UL
CD
U
MD
Æœu vL dU gUL tH —œ
*
gUL tH —œ œu v UD YU t vJœ pœ Á—UL
Æœu v dU
¨bMM vL œU« j«d œuN —œ vJL U q Á«— s« dÖ«
vu ÁbMËd sdJœe U
SonyÆbOUL —uA œu
gÄ —œ qJA qOœ t «— ÁU~œ UL dÖ«
CDdOLF È«d
ÁœUH« œ—u qJA “Ëd ÂU~M —œ t vJœ ¨bd v
Æb—ËUO Á«dL eO «— X« tdÖ —«d
±∂
Æœu v u gUL tH X« —U ‰U —œ ÁU~œ tJOU —œ
tH® X« Áb rOEM sË— ÈË— d qU lD œdJKL
Æ©±∞
ÆXO sJL —U —Ëœ Á«— “« ‰dM ÁU~œ UOKL
UOKL ¨©vUMË— ÊËb® bU ‰UF qU lD œdJKL dÖ«
Æ©±∞ tH® XO sJL —U —Ëœ Á«— “« ‰dM ÁU~œ
X« Áb t«œd oU gË— t bOM qU ÊUMOL«
Æ©¥ tH®
gÄCD/MD
Æœd È—«cÖ—U Ê«u vL «— pœ
ÆX« Áb È—«cÖ—U q “« d~œ pœ p
ÆX« Áb œ—«Ë ÁU« XN —œ U t Ë d —U« U pœ
Æœu vL gÄ pœ
ÆnO U »uOF pœ
CD-R/CD-RW
Æ©±≤ tH® bMO vu ÁœUH« È«d U
ÈU qUMP3/WMAÆbu gÄ bM«u vL
t Ë Xd U pœMP3/WMAÆ©±≤ tH® X« —UÖ“UU
ÈU qU gÄMP3/WMA‰u d~œ ÈU qU “« dAO
ÆbA v
ʬ gÄ U bMA v ‰u ÈdAO ÊU“ b d“ ÈU pœ
Æœu ŸËd U
ÆÁbOâOÄ X—œ —UU p U Áb j{ pœ p ≠
È« tK bMÇ —uB Áb j{ pœ p ≠
Multi Session
Æ
Æbu tU{« ʬ t bM«u v U Áœ«œ t pœ p ≠
Æœd —Ëd Ê«u vL «— gUL ÈU r¬
sJL U ʬ ¨d«—U ÈœU“ —UO œ«bF U U pœ È«d
ÆbuA —Ëd X«
"A.SCRL" ÈË— d "OFF"ÆX« Áb rOEM
T "A.SCRL-ON"U bOM rOEM «— ©±∞ tH®
(SCRL)ÆbOœ —UA «—
Æœu v œ— «b
ÆbU vL `O VB
TrJ XL p —œ t—œ ¥µ tË«“ p —œ «— ÁU~œ
ÆbOM VB qOu« “«
ÆnO U »uOF pœ
ÆbMM vL —U ÈdOÖ—UJ ÈU tLœ
Æb b«u ×U pœ
tLœ RESETÆ©¥ tH® bOœ —UA «—
uœ«— XU—œ
Æœd XU—œ Ê«u vL «— U ÁU~«
Æœu v q U X“«—UÄ ju «b
©ed® vU ‚d lM rO U ©v¬® vd s¬ ‰dM rO p
bOM qË qOu« s¬ ÁbMM XuI p ‚d lM rO t «—
s¬ È«—«œ UL qOu« t vU~M UNM®
FM/MW/SW
vK«œ
Æ©bU v È—UMØVI tAO —œ
ÆbOM vMO“U «— qOu« s¬ ‰UB«
ÆX— b«u ôU —Uœu s¬
TÆbOM vMO“U «— vd s¬ ‰dM rO ‰UB«
ÆbOM vMO“U «— fUd
ÆXO sJL Áb rOEM gOÄ “« vU Ãu
ÆbOM ÁdO– «— tEU —œ `O fUd
ÆX« nOF{ —UO gÄ ‰UM~O
ÆXO sJL —Uœu vU Ãu
ÆXO `O vK Èu XU rOEM
T∫œu v nu vÄUOÄ —uD vU Ãu
"LOCAL-ON"Æ©±∞ tH® bOM rOEM «—
T∫œu vL nu ÁU~« p —œ vU Ãu
"MONO-ON"Æ©±∞ tH® bOM rOEM «—
ÆX« nOF{ —UO gÄ ‰UM~O
TÆbOœ ÂU« «— vœ vU Ãu
XU—œ sO —œFM d~UA ¨"ST"Æb“ v pLAÇ
ÆbOM vU Ãu `O —uD «— fUd
ÆX« nOF{ —UO gÄ ‰UM~O
T"MONO-ON"Æ©±∞ tH® bOM rOEM «—
tUd gÄ p
FM
Æœu v ÁbOM ‰«—uu —uB ud« —œ
Æœ—«œ —«d ‰«—uu XU—œ XU —œ ÁU~œ
T"MONO-OFF"Æ©±∞ tH® bOM rOEM «—
UD ÈU ÂUGOÄØU gUL
*BLANK
±
ÈË— d U „«dMDÆb« ÁbA j{ *
T pMDÆbOM gÄ «— Áb j{ ÈU „«d U
*ERROR
±
ÆX« Áb œ—«Ë t Ë d U X« nO pœ*
TÆbOM œ—«Ë `O —uD U bOM eOL «— pœ
ÆX« Áb œ—«Ë vU pœ p
Æœu gÄ b«u vL vKJA qOœ t pœ
TÆbOM œ—«Ë «— Èd~œ pœ
FAILURE
UuÖbMK ‰UB«U ÁbMM XuIØÆX« X—œU
T‰UB« vMO“U È«d «— ‰b s« ‰UB« VB ÈULM«—
ÆbOUL tEö
LOAD
ÆX« pœ È—«cÖ—U ‰U —œ ÁbMM iuF
TÆœu qU È—«cÖ—U U bOM d
L. SEEK +/–
ÆX« sË— —Uœu vU Ãu sO —œ vK Èu XU
NO DISC
ÁbMM iuF —œ pœCD/MDÆX« ÁbA œ—«Ë
TÆbOM œ—«Ë ÁbMM iuF —œ «— U pœ
NO INFO
ÈU qU —œ s Uö«MP3/WMAÆœu vL tu
NO MAG
ÁbMM iuF —œ pœ ÊeCDÆX« ÁbA œ—«Ë
TÆbOM œ—«Ë ÁbMM iuF —œ «— Êe
NO MUSIC
ÆXO vIOu qU p pœ
T pCDqU ÁbMM iuF U ÁU~œ s« —œ «— vIOu
gÄ
MP3ÆbOM œ—«Ë
1 / 1

Sony CDX-GT360 Istruzioni per l'uso

Categoria
Lettore CD
Tipo
Istruzioni per l'uso

in altre lingue