11
“STAIN BLASTER” button
H
“SPIN SELECTION” button
The spin cycle is very important to remove as much water as possible from the laundry without
damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle
can be cancelled.
To reactivate the spin cycle press the button until you reach the spin speed you would like to set.
To prevent damage to the fabrics, it is not possible to increase the speed over that which is
automatically suitable during the selection of the program.
It is possible to modify the spin speed without to pausing the machine.
Note:
The machine is fitted with a special electronic device, which
prevents the spin cycle should the load be unbalanced.
This reduces the noise and vibration in the machine and so
prolongs the life of your machine.
I
“DIGITAL” Display
L
By pressing this button,which can only be activated in the Cotton cycles, the sensors
in the new Sensor system come into operation. They affect both the selected
temperature, keeping it at a constant level throughout the wash cycle, and the
mechanical function of the drum.
The drum is made to turn at two different speeds at crucial moments.When the
detergent enters the garments, the drum rotates in such a way that the detergent is
distributed in a uniform manner; during the wash and rinse procedures, however, the
speed increases in order to maximise the cleaning action. Thanks to this special
system, the efficiency of the wash procedure is improved WITHOUT ANY INCREASE
IN THE LENGTH OF THE PROGRAM.
By pressing this button,which can only be activated in the Cotton cycles, the sensors in the new Sensor system come into
operation. They affect both the selected temperature, keeping it at a constant level throughout the wash cycle, and the
mechanical function of the drum.
The drum is made to turn at two different speeds at crucial moments.When the detergent enters the garments, the drum rotates in
such a way that the detergent is distributed in a uniform manner; during the wash and rinse procedures, however, the speed
increases in order to maximise the cleaning action. Thanks to this special system, the efficiency of the wash procedure is
improved WITHOUT ANY INCREASE IN THE LENGTH OF THE PROGRAM.
By pressing this button,which can only be activated in the Cotton cycles, the sensors in
the new Sensor system come into operation. They affect both the selected temperature,
keeping it at a constant level throughout the wash cycle, and the mechanical function of
the drum.
The drum is made to turn at two different speeds at crucial moments.When the
detergent enters the garments, the drum rotates in such a way that the detergent is
distributed in a uniform manner; during the wash and rinse procedures, however, the
speed increases in order to maximise the cleaning action. Thanks to this special
system, the efficiency of the wash procedure is improved WITHOUT ANY INCREASE IN
THE LENGTH OF THE PROGRAM.
By pressing this button,which can only be activated in the Cotton cycles, the sensors in
the new Sensor system come into operation. They affect both the selected temperature,
keeping it at a constant level throughout the wash cycle, and the mechanical function of
the drum.
The drum is made to turn at two different speeds at crucial moments.When the detergent
enters the garments, the drum rotates in such a way that the detergent is distributed in a
uniform manner; during the wash and rinse procedures, however, the speed increases in
order to maximise the cleaning action. Thanks to this special system, the efficiency of
the wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH OF THE
PROGRAM.
The display’s indicator system allows you to be constantly informed about the status of the
machine:
1) WASH TEMPERATURE
When a programme is selected the relevant indicator will light up to show the recommended
wash temperature. The Temperature button can be used to decrease or increase the
temperature of your chosen wash cycle. Each time the button is pressed, the new
temperature level is shown on the Wash Temperature Indicator.
5
4 6
2
7
{
1
3
{
{
If you want carry out a cold wash, all the indicators must be off.