Tekno Point IC-24 Guida d'installazione

Climatizzatore Monoblocco a parete

Manuale installatore

Installation manual

IC-24

I prodotti elettrici ed elettronici di eventuale scarto dovranno essere disposti con i normali rifiuti domestici, ma

smaltiti a norma di legge RAEE in base alle direttive Europee 2002/96/CE e successive modifiche 2003/108/CE,

informandosi presso il Comune di residenza o presso il rivenditore nel caso in cui il prodotto venga sostituito

con uno analogo.

Possible wasted electrical or electronic devices/products should not be located together with normal

domestic waste, but disposed according to the current WEEE law in compliance with the European

Directive 2002/96/EC and following modifications 2003/108/EC. Please inform yourself at your local

ITALIANO

4

2

5

INCLINAZIONE 3/5°

Reali

SCARICO CONDENSA

6

NOTA BENE:

Nel funzionamento prolungato in modalità

riscaldamento, in condizioni di elevata umidità

esterna è possibile la formazione di condensa

sulla griglia di espulsione dell’aria. E’ possibile

inoltre che parte della condensa fuoriesca dal

tubo di espulsione aria per effetto di trascina-

mento dell’aria o di difficoltà di smaltimento

dall’eventuale tubo di diametro 30mm.

7

8

9

10

3.1 ICONE DEL TELECOMANDO

Auto

Orologio

Riscaldamento

Raffreddamento

Deumidificazione

Ventilazione

Significato

Velocita' ventilatore

Direzione aria

Timer off

Timer on

Notturno

Non in uso

3. USO E MANUTENZIONE

Significato

3.2 FUNZIONI DEL TELECOMANDO

ITALIANO

11

3.3 MODO RISCALDAMENTO

3.4 MODO RAFFREDDAMENTO

3. USO E MANUTENZIONE ITALIANO

12

3.5 MODO DEUMIDIFICAZIONE

3.6 MODO VENTILAZIONE

3. USO E MANUTENZIONE ITALIANO

13

3.7 MODO NOTTURNO

3.8 MODO AUTOMATICO

21

3. USO E MANUTENZIONE ITALIANO

14

3.9 SPEGNIMENTO CON IL TIMER

3.10 ACCENSIONE CON IL TIMER

3. E

Sequenza delle operazioni.

Fare riferimento al punto 3.1 e 3.2

Sequenza delle operazioni.

Fare riferimento al punto 3.1 e 3.2

1

2

3

4

5

2

1

15

3.16 SOLUZIONE PROBLEMI 3.16 SOLUZIONE PROBLEMI

16

ENGLISH

Do not attempt to repair or adjust any

electrical or mechanical functions on this air

conditioner as this may void warranty,

contact your service engineer.

This air conditioner is not intended for use in

wet or damp locations.

Do not place the air conditioner near an

open flame, cooking or heating appliance,

or hot surface.

Do not let the power cord hand over the

edge of a table or counter. Arrange the

power cord away from an area where it may

be tripped over.

Never place the power cord under a carpet

or rug. Do not operate the air conditioner

in areas where petrol, paint, or other

flammable liquid are used or stored.

Do not carry out any cleaning or maintenance

or access internal parts until the air

conditioner has been disconnected from the

mains electricity supply.

Do not alter the safety or regulating devices

without the permission and instructions of

the air conditioner manufacturer.

Do not pull, remove or twist the electric

cable connected to the air conditioner, even

if disconnected from the mains electricity

supply avoid prolonged direct contact with

the flow of the air from the air conditioner

and the room being closed with no

ventilation for a long period of time.

Repair or maintenance work must be carried

out by a service engineer or by qualified

technicians in compliance with the instructions

given in this booklet. Do not alter the

appliance, since hazardous situations could

be created while the manufacture of the

appliance will not be liable for any damage

or injury caused.

This instruction booklet is an integral part of

the appliance and should therefore be

carefully preserved and always accompany

the appliance in the event of transfer to

another owner or user or another installation

engineer. Should the booklet be damaged or

lost, please request an additional.

Always operate the product from a power

source of the same voltage, frequency and

rating as indicated on the product

identification plate.

1.1 INTRODUCTION

Please note:Don't dispose of any packaging

until the installation of the air conditioner is

completed.

After having removed the packing,check that

all the content is intact and complete.(See

list of accessories). In the event of missing

parts, contact your retailer.

This air conditioner has been designed to cool

or heat the air of a room and should only be

used for this purpose.

Don't switch on before having totally assembled

the air conditioner and before installing in its

correct operating position.

Before starting the appliance, check that it is

correctly earthed, according to the legislation

in force in the country concerned.

Don't place objects on the products or allow

objects to obstruct the inlet or outlet

openings. Extreme care should be taken

when any product is used by,or near children

and pets, and whenever the products is left

operating and unattended.

Before operating the product, remove the air

conditioner from its packaging and check if it

is in good condition.

Do not operate any products with a damaged

cord or plug, or after the air conditioner

malfunctions, has been dropped,or damaged in

any manner.

Do not let child play with the package, for

example the plastic bags.

Please note:

When using electrical appliance, basic safety

precautions should always be followed:

1.2 IMPORTANT SAFETY

INSTRUCTIONS

The manufacture can not be held liable for

damage caused to property or injury to persons

or animals due to incorrect installation,

regulation and maintenance or improper use.

This air conditioner contains R410A refrigerant,

at the end of its life, the disposal of this air

conditioner must be accordance with the strict

regulation governing the recycling of this

product, please operate with caution during the

disposal. Please contact your local authority

for regulation advice.

service centre for examination and repair to

avoid a hazard.

Return the air conditioner to an authorised

8

1

24

55

7

P0

3

6

(SEE PAGE)

The air conditioner is delivered in a

protective packaging and is accompanied by

an instruction manual. This manual is an

integral part of the air conditioner and should

therefore be carefully read and preserved.

When the air conditioner is unpacked, please

check that the air conditioner and accessory

packed are complete and undamaged.

Be fully aware of the weight of the air

conditioner before attempting to lift it. Take

all necessary precautions to avoid damaging

the product or causing personal injury. It is

advisable to remove the packaging only when

the air conditioner has been located in the

point of installation. Carefully remove the

adhesive strips positioned on the air

conditioner. Packaging components must be

tidied up correctly and not left within reach

of children, since they are hiding of danger.

This product has been manufactured to

comply with 2006/95/EC and with

amendments 92/31/EEC and 93/68/EEC.

DISPOSAL: Do not dispose this product as

unsorted municipal waste. Collection of such

waste separately for special treatment is

necessary.

Any batteries used in the remote control

contain materials, which are hazardous to

the environment. They must be removed

from the remote control when they reach the

end of their life and disposed of responsibly.

INSTRUCTION MANUAL

iCOOL 2.3 can be connected only to a supply

wi t h sy ste m i mpe dan ce no m o re t h an

0.216 ohm. In case necessary, please consult

your supply authority for system impedance

information.

W

P1

2346(8000)

973

40

1900

Net weight ( Kg)

900

350

4.35

4.0

50

43/95/19.5

12.5

iCOOL 2.3iCOOL 2.3

Installation bracket

Condenser outlet fan

Condenser inlet fan

Fron panel

Air inlet area

P2

The display will show both setting

temperature and ambient temperature. After

adjusting the setting temperature, the setting

temperature will flash 15 times on the

display, then the display will show the

ambient temperature for 70 seconds. After

that, the display will be off until next

adjustment.

Fuse (T6.3A)

La pagina sta caricando ...

Tekno Point IC-24 Guida d'installazione

Tekno Point IC-24 Guida d'installazione

in altre lingue

Altri documenti