AEG SKD91840S0 Manuale utente

Categoria
Congelatori
Tipo
Manuale utente
SKD91840S0 EN User manual 2
IT Istruzioni per l’uso 25
CONTENTS
1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. HELPFUL HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. NOISES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9. TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable
performance for many years, with innovative technologies that help make life simpler –
features you might not find on ordinary appliances. Please spend a few minutes reading to get
the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com
Register your product for better service:
www.aeg.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
2
www.aeg.com
1.
SAFETY INSTRUCTIONS
In the interest of your safety and to en-
sure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary mis-
takes and accidents, it is important to
ensure that all people using the appli-
ance are thoroughly familiar with its op-
eration and safety features. Save these
instructions and make sure that they re-
main with the appliance if it is moved or
sold, so that everyone using it through
its life will be properly informed on ap-
pliance use and safety.
For the safety of life and property keep
the precautions of these user's instruc-
tions as the manufacturer is not respon-
sible for damages caused by omission.
1.1 Children and vulnerable
people safety
This appliance is not intended for use
by persons (including children) with re-
duced physical, sensory or mental ca-
pabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
Children should be supervised to en-
sure that they do not play with the ap-
pliance.
Keep all packaging well away from
children. There is risk of suffocation.
If you are discarding the appliance
pull the plug out of the socket, cut the
connection cable (as close to the ap-
pliance as you can) and remove the
door to prevent playing children to
suffer electric shock or to close them-
selves into it.
If this appliance featuring magnetic
door seals is to replace an older appli-
ance having a spring lock (latch) on
the door or lid, be sure to make that
spring lock unusable before you dis-
card the old appliance. This will pre-
vent it from becoming a death trap for
a child.
1.2 General safety
WARNING!
Keep ventilation openings, in the appli-
ance enclosure or in the built-in struc-
ture, clear of obstruction.
The appliance is intended for keeping
foodstuff and/or beverages in a nor-
mal household and similar applica-
tions such as:
staff kitchen areas in shops, offices
and other working environments;
farm houses and by clients in hotels,
motels and other residential type
environments;
bed and breakfast type environ-
ments;
catering and similar non-retail appli-
cations.
Do not use a mechanical device or any
artificial means to speed up the thaw-
ing process.
Do not use other electrical appliances
(such as ice cream makers) inside of
refrigerating appliances, unless they
are approved for this purpose by the
manufacturer.
Do not damage the refrigerant circuit.
The refrigerant isobutane (R600a) is
contained within the refrigerant circuit
of the appliance, a natural gas with a
high level of environmental compati-
bility, which is nevertheless flammable.
During transportation and installation
of the appliance, be certain that none
of the components of the refrigerant
circuit become damaged.
If the refrigerant circuit should be-
come damaged:
avoid open flames and sources of
ignition
thoroughly ventilate the room in
which the appliance is situated
It is dangerous to alter the specifica-
tions or modify this product in any
way. Any damage to the cord may
cause a short-circuit, fire and/or elec-
tric shock.
ENGLISH 3
WARNING!
Any electrical component (power
cord, plug, compressor) must be
replaced by a certified service
agent or qualified service per-
sonnel to avoid hazard.
1.
Power cord must not be length-
ened.
2.
Make sure that the power plug is
not squashed or damaged by the
back of the appliance. A squashed
or damaged power plug may
overheat and cause a fire.
3.
Make sure that you can come to
the mains plug of the appliance.
4.
Do not pull the mains cable.
5.
If the power plug socket is loose,
do not insert the power plug.
There is a risk of electric shock or
fire.
6.
You must not operate the appli-
ance without the lamp cover (if
foreseen) of interior lighting.
This appliance is heavy. Care should
be taken when moving it.
Do not remove nor touch items from
the freezer compartment if your hands
are damp/wet, as this could cause skin
abrasions or frost/freezer burns.
Avoid prolonged exposure of the ap-
pliance to direct sunlight.
Bulb lamps (if foreseen) used in this
appliance are special purpose lamps
selected for household appliances use
only. They are not suitable for house-
hold room illumination.
1.3 Daily use
Do not put hot pot on the plastic parts
in the appliance.
Do not store flammable gas and liquid
in the appliance, because they may
explode.
Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instruc-
tions.
1.4 Care and cleaning
Before maintenance, switch off the ap-
pliance and disconnect the mains plug
from the mains socket.
Do not clean the appliance with metal
objects.
Regularly examine the drain in the re-
frigerator for defrosted water. If neces-
sary, clean the drain. If the drain is
blocked, water will collect in the bot-
tom of the appliance.
1.5 Installation
For electrical connection careful-
ly follow the instructions given in
specific paragraphs.
Unpack the appliance and check if
there are damages on it. Do not con-
nect the appliance if it is damaged.
Report possible damages immediately
to the place you bought it. In that case
retain packing.
It is advisable to wait at least four
hours before connecting the appli-
ance to allow the oil to flow back in
the compressor.
Adequate air circulation should be
around the appliance, lacking this
leads to overheating. To achieve suffi-
cient ventilation follow the instructions
relevant to installation.
Wherever possible the back of the
product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.
The appliance must not be located
close to radiators or cookers.
Make sure that the mains plug is ac-
cessible after the installation of the ap-
pliance.
Connect to potable water supply only
(If a water connection is foreseen).
1.6 Service
Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
4
www.aeg.com
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refriger-
ant circuit or insulation materials.
The appliance shall not be dis-
carded together with the urban
refuse and rubbish. The insula-
tion foam contains flammable
gases: the appliance shall be dis-
posed according to the applica-
ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-
changer. The materials used on
this appliance marked by the
symbol
are recyclable.
2. CONTROL PANEL
56 4 3 2
1
1
Display
2
Temperature warmer button
3
Temperature colder button
4
OK button
5
Mode button
6
ON/OFF button
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is reversible.
2.1 Display
FROST
MATIC
COOL
MATIC
E
CB DA
H FG
A)
Timer function
B)
COOLMATIC function
C)
FROSTMATIC function
D)
Temperature indicator
E)
Alarm indicator
F)
Child Lock function
G)
Minute Minder function
H)
Dynamic Air function
2.2 Switching on
To switch on the appliance do these
steps:
1.
Connect the mains plug to the pow-
er socket.
2.
Press the appliance ON/OFF button
if the display is off.
3.
The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4.
If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "WHAT TO DO IF..."
paragraph.
5.
The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the appliance ON/OFF button
for 5 seconds.
2.
The display switches off.
3.
To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
ENGLISH 5
2.4 Temperature regulation
The set temperature of the fridge may
be adjusted by pressing the temperature
button.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
2.5 COOLMATIC function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The COOLMATIC indicator flashes.
2.
Press the OK button to confirm.
The COOLMATIC indicator is
shown.
The COOLMATIC function shuts off au-
tomatically after approximately 6 hours.
To switch off the function before its au-
tomatic end:
1.
Press the Mode button until the
COOLMATIC indicator flashes.
2.
Press the OK button to confirm.
3.
The COOLMATIC indicator goes off.
The function switches off by se-
lecting a different fridge set tem-
perature.
2.6 FROSTMATIC function
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
The FROSTMATIC indicator is
shown.
This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:
1.
Press the Mode button until the
FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
3.
The FROSTMATIC indicator goes
off.
The function switches off by se-
lecting a different freezer set
temperature.
2.7 Door open alarm
An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
flashing Alarm light
acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing alarm button.
2.8 Child Lock function
To lock the buttons from unintentional
operation select the Child Lock function.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the
Child Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.
2.9 Minute Minder function
The Minute Minder function is to be
used to set an acoustic alarm at the pre-
ferred time, useful for example when a
recipe requires to cool down a mixture
for a certain length of time, or when a re-
minder is needed in order not to forget
the bottles placed in the freezer for fast
cooling.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
6
www.aeg.com
The Timer shows the set value (30
minutes) for a few seconds.
2.
Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3.
Press the OK button to confirm.
The Minute Minder indicator is
shown.
The Timer start to flash (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
alarm sounds:
1.
Remove any drinks contained in the
freezer compartment.
2.
Press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function
at any time during the countdown:
1.
Press the Mode button until the Mi-
nute Minder indicator flashes.
2.
Press the OK button to confirm.
3.
The Minute Minder indicator goes
off.
It is possible to change the time during
the countdown and at the end by press-
ing the Temperature colder button and
the Temperature warmer button.
2.10 DYNAMICAIR function
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The DYNAMICAIR indicator flashes.
2.
Press the OK button to confirm.
The DYNAMICAIR indicator is
shown.
To switch off the function:
1.
Press the Mode button until the DY-
NAMICAIR indicator flashes.
2.
Press the OK button to confirm.
3.
The DYNAMICAIR indicator goes
off.
If the function is activated auto-
matically the DYNAMICAIR indi-
cator is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.
3. DAILY USE
3.1 Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abra-
sive powders, as these will dam-
age the finish.
If “dEMo” appears on the Display, the
appliance is in demonstration mode: re-
fer to “WHAT TO DO IF...” paragraph.
3.2 Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze fresh food activate the FROST-
MATIC function at least 24 hours before
placing the food to be frozen in the
freezer compartment.
The maximum amount of food that can
be frozen in 24 hours is specified on the
rating plate (Refer to "Technical data").
The freezing process lasts 24 hours: dur-
ing this period do not add other food to
be frozen.
3.3 Storage of frozen food
When first starting-up or after a period
out of use, before putting the products
in the compartment let the appliance run
at least 2 hours on the higher settings.
If large quantities of food are to be stor-
ed, remove all drawers and baskets from
appliance and place food on cooling
shelves to obtain the best performance.
ENGLISH 7
WARNING!
Make sure that foods do not ex-
ceed the load limit stated on the
side of the upper section (where
applicable)
In the event of accidental de-
frosting, for example due to a
power failure, if the power has
been off for longer that the value
shown in the technical character-
istics chart under "rising time",
the defrosted food must be con-
sumed quickly or cooked imme-
diately and then re-frozen (after
cooling).
3.4 Thawing
Deep-frozen or frozen food, prior to be-
ing used, can be thawed in the refrigera-
tor compartment or at room tempera-
ture, depending on the time available
for this operation.
Small pieces may even be cooked still
frozen, directly from the freezer: in this
case, cooking will take longer.
3.5 Movable shelves
A
B
The walls of the refrigerator are equip-
ped with a series of supports so that the
shelves can be positioned as desired.
For better use of space, the front half-
shelves can be placed under the rear
ones.
3.6 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
3.7 Positioning the sliding box
The sliding box can be placed at differ-
ent heights.
Do make these adjustments proceed as
follow:
1.
lift the shelf with the sliding box up-
wards and out of the holders in the
door
2.
remove the retaining bracket out of
the guide under the shelf
3.
Reverse the above operation to in-
sert the sliding box at a different
height.
8
www.aeg.com
3.8 Temperature Indicator
This appliance is sold in France.
In accordance with regulations
valid in this country it must be
provided with a special device
(see figure) placed in the lower
compartment of the fridge to in-
dicate the coldest zone of it.
3.9 Carbon Air Filter
Your appliance is equipped with a car-
bon filter CLEANAIR CONTROL in a
drawer in the rear wall of the fridge com-
partment.
The filter purifies the air from unwanted
odours in the fridge compartment mean-
ing that the storage quality will be fur-
ther improved.
During the operation, always keep the
air ventilation drawer closed.
3.10 DynamicAir
The refrigerator compartment is equip-
ped with a device that allows for rapid
cooling of foods and more uniform tem-
perature in the compartment.
This device activates by itself when nee-
ded, for example for a quick tempera-
ture recovering after door opening or
when the ambient temperature is high.
Allows you to switch on the device man-
ually when needed (refer to DynamicAir
mode).
The DynamicAir device stops when the
door is open and restarts immediately
after the door closing.
ENGLISH 9
4. HELPFUL HINTS AND TIPS
4.1 Hints for energy saving
Do not open the door frequently or
leave it open longer than absolutely
necessary.
If the ambient temperature is high and
the Temperature Regulator is set to
low temperature and the appliance is
fully loaded, the compressor may run
continuously, causing frost or ice on
the evaporator. If this happens, set the
Temperature Regulator toward warm-
er settings to allow automatic defrost-
ing and so a saving in electricity con-
sumption.
4.2 Hints for fresh food
refrigeration
To obtain the best performance:
do not store warm food or evaporat-
ing liquids in the refrigerator
do cover or wrap the food, particularly
if it has a strong flavour
position food so that air can circulate
freely around it
4.3 Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags
and place on the glass shelf above the
vegetable drawer.
For safety, store in this way only one or
two days at the most.
Cooked foods, cold dishes, etc.: these
should be covered and may be placed
on any shelf.
Fruits and vegetables: these should be
thoroughly cleaned and placed in the
special drawer(s) provided. When in con-
tact, lemon juice can discolor the plastic
parts of your fridge. It is therefore rec-
ommended to keep citruses in separate
containers.
Butter and cheese: these should be
placed in special airtight containers or
wrapped in aluminium foil or polythene
bags to exclude as much air as possible.
Bottles: these should have a cap and
should be stored in the bottle rack on
the door.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the re-
frigerator.
4.4 Hints for freezing
To help you make the most of the freez-
ing process, here are some important
hints:
the maximum quantity of food which
can be frozen in 24 hrs. is shown on
the rating plate;
the freezing process takes 24 hours.
No further food to be frozen should
be added during this period;
only freeze top quality, fresh and thor-
oughly cleaned, foodstuffs;
prepare food in small portions to ena-
ble it to be rapidly and completely fro-
zen and to make it possible subse-
quently to thaw only the quantity re-
quired;
wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
do not allow fresh, unfrozen food to
touch food which is already frozen,
thus avoiding a rise in temperature of
the latter;
lean foods store better and longer
than fatty ones; salt reduces the stor-
age life of food;
water ices, if consumed immediately
after removal from the freezer com-
partment, can possibly cause the skin
to be freeze burnt;
it is advisable to show the freezing in
date on each individual pack to enable
you to keep tab of the storage time.
4.5 Hints for storage of frozen
food
To obtain the best performance from
this appliance, you should:
make sure that the commercially fro-
zen foodstuffs were adequately stored
by the retailer;
be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
10
www.aeg.com
not open the door frequently or leave
it open longer than absolutely neces-
sary;
once defrosted, food deteriorates rap-
idly and cannot be refrozen;
do not exceed the storage period in-
dicated by the food manufacturer.
5. CARE AND CLEANING
CAUTION!
Unplug the appliance before car-
rying out any maintenance oper-
ation.
This appliance contains hydrocar-
bons in its cooling unit; mainte-
nance and recharging must
therefore only be carried out by
authorized technicians.
5.1 Periodic cleaning
The equipment has to be cleaned regu-
larly:
clean the inside and accessories with
lukewarm water and some neutral
soap.
regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
rinse and dry thoroughly.
Do not pull, move or damage
any pipes and/or cables inside
the cabinet.
Never use detergents, abrasive
powders, highly perfumed clean-
ing products or wax polishes to
clean the interior as this will dam-
age the surface and leave a
strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush. This operation will improve
the performance of the appliance and
save electricity consumption.
Take care of not to damage the
cooling system.
Many proprietary kitchen surface clean-
ers contain chemicals that can attack/
damage the plastics used in this appli-
ance. For this reason it is recommended
that the outer casing of this appliance is
only cleaned with warm water with a little
washing-up liquid added.
After cleaning, reconnect the equipment
to the mains supply.
5.2 Replacing the carbon air
filter
To get the best performance the carbon
air filter should be changed once every
year.
New active air filters can be purchased
from your local dealer.
Refer to "Installation of the carbon air fil-
ter" for the instructions.
The air filter is a consumable accessory
and as such is not covered by the guar-
antee.
ENGLISH 11
5.3 Defrosting the refrigerator
Frost is automatically eliminated from
the evaporator of the refrigerator com-
partment every time the motor compres-
sor stops, during normal use. The de-
frost water drains out through a drain
hole into a special container at the back
of the appliance, over the motor com-
pressor, where it evaporates.
It is important to periodically clean the
defrost water drain hole in the middle of
the refrigerator compartment channel to
prevent the water overflowing and drip-
ping onto the food inside.
5.4 Defrosting the freezer
A certain amount of frost will always form
on the freezer shelves and around the
top compartment.
Defrost the freezer when the frost layer
reaches a thickness of about 3-5 mm.
About 12 hours prior to defrost-
ing, set the Temperature regula-
tor toward higher settings , in or-
der to build up sufficient chill re-
serve for the interruption in oper-
ation.
To remove the frost, follow the instruc-
tions below:
1.
Switch off the appliance.
2.
Remove any stored food, wrap it in
several layers of newspaper and put
it in a cool place.
CAUTION!
Do not touch frozen goods with
wet hands. Hands can freeze to
the goods.
3.
Leave the door open.
In order to speed up the defrost-
ing process, place a pot of warm
water in the freezer compart-
ment. In addition, remove pieces
of ice that break away before de-
frosting is complete.
4.
When defrosting is completed, dry
the interior thoroughly.
5.
Switch on the appliance.
6.
After two or three hours, reload the
previously removed food into the
compartment.
Never use sharp metal tools to
scrape off frost from the innerlin-
er as you could damage it.
Do not use a mechanical device
or any artificial means to speed
up the thawing process other
than those recommended by the
manufacturer.
A temperature rise of the frozen
food packs, during defrosting,
may shorten their safe storage
life.
5.5 Periods of non-operation
When the appliance is not in use for
long periods, take the following precau-
tions:
disconnect the appliance from elec-
tricity supply
remove all food
defrost (if foreseen) and clean the ap-
pliance and all accessories
leave the door/doors ajar to prevent
unpleasant smells.
If the cabinet will be kept on, ask some-
body to check it once in a while to pre-
vent the food inside from spoiling in
case of a power failure.
12
www.aeg.com
6. WHAT TO DO IF…
WARNING!
Before troubleshooting, discon-
nect the mains plug from the
mains socket.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
Problem Possible cause Solution
The appliance is
noisy
The appliance is not sup-
ported properly
Check if the appliance
stands stable (all the four
feet should be on the
floor)
The appliance does
not operate. The
lamp does not oper-
ate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not
connected to the mains
socket correctly.
Connect the mains plug to
the mains socket correctly.
The appliance has no
power. There is no volt-
age in the mains socket.
Connect a different electri-
cal appliance to the mains
socket.
Contact a qualified electri-
cian.
The lamp does not
work.
The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the
lamp".
The compressor op-
erates continually.
The temperature is not
set correctly.
Set a higher temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The product temperature
is too high.
Let the product tempera-
ture decrease to room
temperature before stor-
age.
The room temperature is
too high.
Decrease the room tem-
perature.
ENGLISH 13
Problem Possible cause Solution
The compressor
does not start imme-
diately after press-
ing the COOLMATIC
or FROSTMATIC
switch, or after
changing the tem-
perature.
This is normal, no error
has occurred.
The compressor starts af-
ter a period of time.
Water flows on the
rear plate of the re-
frigerator.
During the automatic de-
frosting process, frost de-
frosts on the rear plate.
This is correct.
Water flows into the
refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Products prevent that wa-
ter flows into the water
collector.
Make sure that products
do not touch the rear
plate.
The temperature in
the appliance is too
low/high.
The temperature regula-
tor is not set correctly.
Set a higher/lower temper-
ature.
The temperature in
the refrigerator is
too high.
There is no cold air circu-
lation in the appliance.
Make sure that there is
cold air circulation in the
appliance.
The temperature in
the freezer is too
high.
Products are too near to
each other.
Store products so that
there is cold air circulation.
There is too much
frost.
Food is not wrapped cor-
rectly.
Wrap the food correctly.
The door is not closed
correctly.
Refer to "Closing the
door".
The temperature regula-
tor is not set correctly.
Set a higher temperature.
Upper or lower
square is shown in
the temperature Dis-
play.
An error has occurred in
measuring the tempera-
ture.
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible).
dEMo appears on
the Display.
The appliance is in dem-
onstration mode
(dEMo).
Keep pressed approxi-
mately 10 sec. the OK but-
ton since a long sound of
buzzer is heard and the
Display shut off for a short
while: appliance start
works regularly.
14
www.aeg.com
6.1 Replacing the lamp
The appliance is equipped with a long-
life LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center.
6.2 Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer
to "Installation".
3.
If necessary, replace the defective
door gaskets. Contact the Service
Center.
7. INSTALLATION
7.1 Positioning
WARNING!
If you are discarding an old appli-
ance that has a lock or catch on
the door, you must ensure that it
is made unusable to prevent
young children being trapped in-
side.
The appliance shall have the
plug accessible after installation.
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
Cli-
mate
class
Ambient temperature
T +16°C to + 43°C
7.2 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic pow-
er supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the do-
mestic power supply socket is not earth-
ed, connect the appliance to a separate
earth in compliance with current regula-
tions, consulting a qualified electrician.
The manufacturer declines all responsi-
bility if the above safety precautions are
not observed.
This appliance complies with the E.E.C.
Directives.
ENGLISH 15
7.3 Installation of the CLEANAIR CONTROL Filter
TheCLEANAIR CONTROL Filter is an ac-
tive carbon filter which absorbs bad
odors maintain the best flavour and aro-
ma for all foodstuffs without risk of odor
cross contamination.
On delivery the carbon filter is in a plas-
tic bag to preserve performance.
The filter should be placed in the drawer
before the appliance is turned on.
Open the drawer.
Take the filter out of the plastic bag.
Insert the filter in the drawer.
Close the drawer.
The filter should be handled
carefully so fragments do not
loosen from the surface.
Make sure that the air lever draw-
er is closed to obtain proper
function.
7.4 Door reversibility
The door of the appliance opens to the
right. If you want to open the door to the
left, follow these steps before you install
the appliance:
1.
Loosen and remove the upper pin.
2.
Remove the door.
3.
Remove the spacer.
4.
With a key, loosen the lower pin.
On the opposite side:
1.
Tighten the lower pin.
2.
Install the spacer.
3.
Install the door.
4.
Tighten the upper pin.
16
www.aeg.com
7.5 Ventilation requirements
5 cm
min.
200 cm
2
min.
200 cm
2
The airflow behind the appliance must
be sufficient.
7.6 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
Do the following steps:
x
x
If necessary cut the adhesive sealing strip
and then apply it to the appliance as
shown in figure.
ENGLISH 17
Ø 2.5 mm
13 mm
1
3
2
Drill the appliance using a Ø 2.5 mm drill
(10 mm max. penetration).
Fix the square fitting to the appliance.
1
2
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
arrow (2) against the cupboard on the op-
posite side of the hinge.
44mm
4mm
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge is
44 mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen fur-
niture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4 mm.
Open the door. Put the lower hinge cover
in position.
18
www.aeg.com
I
I
Attach the appliance to the niche with 4
screws.
Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
E
E
B
D
C
Attach the covers (C, D) to the lugs and
the hinge holes.
Install the vent grille (B).
Attach the hinge covers (E) to the hinge.
ENGLISH 19
Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
21 mm
~50 mm
~50 mm
90
o
90
o
90
o
Install the part (Ha) on the inner side of
the kitchen furniture.
Ha
Hc
Push the part (Hc) on the part (Ha).
20
www.aeg.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

AEG SKD91840S0 Manuale utente

Categoria
Congelatori
Tipo
Manuale utente

in altre lingue