Sony CDX-F5550 Manuale del proprietario

Wichtig!

Bitte nehmen Sie sich etwas Zeit, um den Geräte-Pass vollständig

auszufüllen. Dieser befindet sich auf der hinteren Umschlagseite dieser

Bedienungsanleitung.

Si dichiara che l’apparecchio è stato fabbricato in conformità all’art. 2, Comma l del D.M. 28.08.

1995 n. 548.

For installation and connections, see the supplied installation/connections manual.

Zur Installation und zum Anschluss siehe die mitgelieferte Installations-/Anschlussanleitung.

En ce qui concerne l’installation et les connexions, consulter le manuel d’installation/

raccordement fourni.

Per l’installazione e i collegamenti, fare riferimento al manuale di istruzioni per

l’installazione e i collegamenti in dotazione.

Zie voor het monteren en aansluiten van het apparaat de bijgeleverde handleiding "Installatie

en aansluitingen".

CDX-F5550

2-349-097-11 (1)

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

2-349-097-11 (1)

GB

DE

FR

IT

NL

H:\Data Disk\2349097111\234909711CDXF5550EUR\00GB+00COV-EUR.fm masterpage:Right

FM

/

MW

/

LW

Compact Disc Player

2

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB01INT-EUR.fm masterpage:Left

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT*), CD-R/CD-RW (MP3 files also

containing Multi Session (

page 14)) and

ATRAC CD (ATRAC3 and ATRAC3plus

format (

page 15)).

• Radio reception

–You can store up to 6 stations per band (FM1,

FM2, FM3, MW and LW).

–BTM (Best Tuning Memory) function: the

unit selects strong signal stations and stores

them.

• RDS services

You can use FM station with Radio Data

System (RDS).

• Sound adjustment

–EQ3: You can select an equalizer curve for 7

music types.

–DSO (Dynamic Soundstage Organizer):

creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

• Optional unit operation

You can also control optional CD/MD

changers, in addition to playing with this unit.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

SonicStage and its logo are trademarks of Sony

Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos

are trademarks of Sony Corporation.

Type of discs Label on the disc

CD-DA

MP3

ATRAC CD

Warning if your car’s ignition has no

ACC position

After turning the ignition off, be sure to press

and hold (OFF) on the unit until the display

disappears.

Otherwise, the display does not turn off and

this causes battery drain.

This label is located on the bottom of the

chassis.

3

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\00GB+00COV-EURTOC.fm masterpage:Right

Table of Contents

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 4

Attaching the front panel . . . . . . . . . . . . . . . 5

Inserting the disc in the unit . . . . . . . . . . . . . . . 5

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Card remote commander RM-X151 . . . . . . 6

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . . 8

Repeat and shuffle play . . . . . . . . . . . . . . . . 8

Radio

Storing and receiving stations . . . . . . . . . . . . . . 8

Storing automatically — BTM . . . . . . . . . . 8

Storing manually . . . . . . . . . . . . . . . . . . . . . 8

Receiving the stored stations . . . . . . . . . . . . 8

Tuning automatically . . . . . . . . . . . . . . . . . . 8

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting AF and TA/TP . . . . . . . . . . . . . . . . . 9

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . 10

Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . 10

Other functions

Changing the sound settings. . . . . . . . . . . . . . 11

Adjusting the sound characteristics

— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . 11

Adjusting the equalizer curve — EQ3 . . . 11

Adjusting setup items — SET . . . . . . . . . . . . 11

Using optional equipment. . . . . . . . . . . . . . . . 12

CD/MD changer . . . . . . . . . . . . . . . . . . . . 12

Rotary commander RM-X4S . . . . . . . . . . 13

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 14

About MP3 files . . . . . . . . . . . . . . . . . . . . 14

About ATRAC CD . . . . . . . . . . . . . . . . . . 15

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 16

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 17

Error displays/Messages . . . . . . . . . . . . . . 18

4

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold (SEL).

The setup display appears.

2 Press (SEL) repeatedly until “CLOCK-

ADJ” appears.

3 Press (DSPL ) .

The hour indication flashes.

4 Press the volume +/– button to set the

hour and minute.

To move the digital indication, press (DSPL).

5 Press (SEL).

The clock starts and the next setup display

appears.

6 Press and hold (SEL).

The setup is complete.

To display the clock, press (DSPL) . Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (

page 10).

With the card remote commander

In step 4, to set the hour and minute, press M or m.

DEMO mode

When the unit is turned off, the clock is

displayed first, then demonstration (DEMO)

mode starts the demonstration display.

To cancel the DEMO mode, set “DEMO-OFF”

in setup (

page 11) while the unit is turned off.

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press (OPEN).

The front panel is flipped down.

3 Slide the front panel to the right, then

gently pull out the left end of the front

panel.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel, use the supplied front

panel case

.

RESET

button

1

2

5

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Inserting the disc in the

unit

1 Press (OPEN).

2 Insert the disc (label side up).

3 Close the front panel.

Playback starts automatically.

Ejecting the disc

1 Press (OPEN).

2 Press Z.

The disc is ejected.

3 Close the front panel.

A

B

x

6

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Location of controls and basic operations

Main unit

Front panel removed

Card remote commander

RM-X151

Refer to the pages listed for details. The

corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A Volume +/– button

To adjust volume.

B ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

C DSPL (display) button 4, 8, 12

To change display items.

D SEL (select) button 4, 11, 12

To select items.

E Display window

F EQ3 (equalizer) button 2, 11

To select an equalizer type (XPLOD,

VOCAL, CLUB, JAZZ, NEW

AGE, ROCK,

CUSTOM or OFF).

DSPL

SEL

DSO

EQ3

ATT

OPEN

SEEK

SOURCE MODE

OFF

1 2 3 4 5 6

AF/TA SENS PTY

–+GP/DISC REP SHUF BTM LIST

CDX-F5550

q

j

q

h

q

g

q

f

q

d

q

s

q

a

0

12 3 4 6 7 8 95

RESET

qk ql w;

OFF

DSPL

SCRL

SEL

SOURCE

MODE

132

465

ATT

VOL

+

–

+

–

2

3

qd

qa

qs

4

wf

wa

ws

wg

wd

7

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

G DSO button 2

To select the DSO mode (1, 2, 3 or OFF).

The larger the number, the more enhanced

the effect.

H OPEN button 4, 5

To open the front panel.

I SEEK +/– button

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

CD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); fast-forward/

reverse a track (press and hold).

J Receptor for the card remote

commander

K SOURCE button

To power on/change the source (Radio/CD/

MD*

1

).

L MODE button 8, 12

To select the radio band (FM/MW/LW)/

select the unit*

2

.

M OFF button

To power off/stop the source.

N Number buttons

Radio:

To receive stored stations (press); store

stations (press and hold).

CD/MD*

1

:

(1)/(2): GP*

3

/DISC*

2

–/+

To skip groups (press); skip groups

continuously (press and hold).

(3): REP 8

(4): SHUF 8

O AF (Alternative Frequencies)/TA

(Traffic Announcement) button

9

To set AF and TA/TP in RDS.

P SENS/BTM button 8

To improve weak reception: LOCAL/MONO

(press); start the BTM function (press and

hold).

Q PTY (Programme Type)/LIST button

10

To select PTY in RDS; list up.

R RESET button 4

S Z (eject) button 5

T Disc slot 5

The following buttons on the card remote

commander have also different buttons/functions

from the unit.

wa < (.)/, (>) buttons

To control radio/CD, the same as (SEEK)

+/– on the unit. (For details of other

operations, see “With the card remote

commander” on each pages.)

ws VOL +/– button

To adjust volume.

wd M (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on

the unit. (For details of other operations, see

“With the card remote commander” on each

pages.)

wf SCRL button 8

To scroll the display item.

wg Number buttons

To receive stored stations (press); store

stations (press and hold).

*1 When an MD changer is connected.

*2 When a CD/MD changer is connected.

*3 When an MP3/ATRAC CD is played and a changer

is not connected. If the changer is connected, the

operation is different, see page 12.

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery of the card remote

commander” on page 15.

8

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

CD

For details on connecting to a CD/MD changer,

see

page 12.

Display items

A Track number/Elapsed playing time,

Disc/artist name, Group number*

1

,

Group name, Track name, Text

information*

2

, Clock

B Source

*1 Group number is displayed only when the group is

changed.

*2 When playing an MP3, ID3 tag is displayed and

when playing a ATRAC CD, text information written

by SonicStage, etc. is displayed.

To change display items A, press (DSPL);

scroll display items A, press (SCRL) on the

card remote commander or set “A.SCRL-ON”

(

page 11).

Tip

Displayed item will differ, depending on the disc type

and recorded format. For details on MP3, see

page 14; ATRAC CD, see page 15.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/ATRAC CD is played.

To return to normal play mode, select “REP-

OFF” or “SHUF-OFF.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold (BTM) until “BTM”

flashes.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previous stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is

also stored (

page 9).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

With the card remote commander

To select preset stations, press M or m.

Tuning automatically

1 Select the band, then press (SEEK) +/–

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK)

+/– to locate the

approximate frequency, then press (SEEK)

+/–

repeatedly to fine adjust to the desired frequency

(manual tuning).

Select To play

REP-TRACK track repeatedly.

REP-GP* group repeatedly.

SHUF-GP* group in random order.

SHUF-DISC disc in random order.

AB

9

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio programme signal.

Display items

A Frequency*

1

(Station name), Clock,

RDS data

B Radio band, Function

C TA/TP*

2

*1 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

*2 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

To change display items A, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA/TP

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so as to not miss hearing them.

1 Press the volume +/– button repeatedly to

adjust the volume level.

2 Press and hold (AF/TA) until “TA” appears.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Staying with one regional

programme — REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional programme’s reception

area, set “REG-OFF” in setup (

page 11).

Note

This function does not work in the UK and in some

other areas.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same programme during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Programme)

Provides current traffic information/

programmes. Any information/programme

received, will interrupt the currently selected

source.

PTY (Programme Types)

Displays the currently received programme

type. Also searches your selected programme

type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

AB C

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

continue to next page t

10

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press (PTY) during FM reception.

The current programme type name appears if

the station is transmitting PTY data.

2 Press (PTY) repeatedly until the

desired programme type appears.

3 Press (S EEK) +/–.

The unit starts to search for a station

broadcasting the selected programme type.

With the card remote commander

In step 2, to select the programme type, press M or m.

Type of programmes

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 11).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP

M (Popular Music),

ROCK

M (Rock Music), EASY M (Easy

Listening), LIGHT

M (Light Classical),

CLASSICS (Classical), OTHER

M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programmes), SOCIAL

A (Social Affairs),

RELIGION (Religion), PHONE

IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION

M (National Music), OLDIES (Oldies

Music), FOLK

M (Folk Music), DOCUMENT

(Documentary)

11

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

Other functions

Changing the sound settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer

volume.

1 Press (SEL) repeatedly until “BAL,”

“FAD” or “SUB” appears.

The item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

2

*1 When EQ3 is activated (page 11).

*2 When the audio output is set to “SUB”

(page 11).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 20 steps.

2 Press the volume +/– button

repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press <, M, ,

or m.

Adjusting the equalizer curve

— EQ3

You can adjust and store the equalizer settings

for different tone ranges.

1 Select a source, then press (EQ3)

repeatedly to select the EQ3 type.

2 Press (SEL) repeatedly until “LOW,”

“MID” or “HI” appears.

3 Press the volume +/– button

repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (SEL) before the setting is

complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In step 3, to adjust the selected item, press <, M, ,

or m.

Adjusting setup items — SET

1 Press and hold (SEL) .

The setup display appears.

2 Press (SEL) repeatedly until the

desired item appears.

3 Press the volume +/– button to select

the setting (example “ON” or “OFF”).

4 Press and hold (SEL) .

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In step 3, to select the setting, press < or ,.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

CLOCK-ADJ (Clock Adjust)

(page 4)

CT (Clock Time)

To set “ON” or “OFF” (

z) (page 9, 10).

BEEP

To set “ON” (

z) or “OFF.”

SUB/REAR*

1

To switch the audio output.

–“SUB” (

z): to output to a subwoofer.

–“REAR”: to output to a power amplifier.

DIM (Dimmer)

To change the brightness of the display.

–“ON”: to dim the display.

–“OFF” (

z): to deactivate the dimmer.

CONTRAST

To adjust the contrast of the display.

The contrast level is adjustable in 7 steps.

M.DSPL*

2

(Motion Display)

–“ON” (

z): to show moving patterns.

–“OFF”: to deactivate the Motion Display.

DEMO*

1

(Demonstration)

To set “ON” (

z) or “OFF” (page 4).

A.SCRL (Auto Scroll)

To scroll long displayed items automatically

when the group/track is changed.

–“ON”: to scroll.

–“OFF” (

z): to not scroll.

REG*

3

(Regional)

To set “ON” (

z) or “OFF” (page 9).

continue to next page t

12

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

*1 When the unit is turned off.

*2 When the unit is turned on.

*3 When FM is received.

*4 When the audio output is set to “SUB.”

Using optional equipment

CD/MD changer

Selecting the changer

1 Press (SOURCE) repeatedly until “CD” or

“MD” appears.

2 Press (MODE) repeatedly until the desired

changer appears.

Playback starts.

Skipping groups and discs

1 During playback, press (1)/(2) (GP/DISC)

–/+.

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

*1 When one or more CD/MD changers are

connected.

*2 When one or more CD changers, or two or more

MD changers are connected.

To return to normal play mode, select “REP-

OFF” or “SHUF-OFF.”

Tip

“SHUF-ALL” will not shuffle tracks between CD units

and MD changers.

Labelling a disc

When you play a disc in a CD changer with the

CUSTOM FILE function, you can label each

disc with a custom name up to 8 characters (Disc

Memo).

If you label a disc, the name appears on the list.

1 While playing a disc that you want to

label, press and hold (LIST).

2 Press the volume +/– button

repeatedly until the desired character

appears.

The character changes as follows.

A y B y C ... y 0 y 1 y 2 ... y +

y – y

... y (blank space) y A

To move the digital indication, press (SEL).

Repeat this operation until the entire name is

entered.

3 Press and hold (LIST).

The labelling is complete and the display

returns to normal play mode.

To display the name, press (DSPL) during

playback.

Tips

• To correct or erase a character, overwrite or enter

“

.”

• The Disc Memo always takes priority over any

prerecorded title.

• You can label a disc on the unit if a changer with the

CUSTOM FILE function is connected.

• “REP-TRACK” and all shuffle play are suspended

until the labelling is complete.

With the card remote commander

In step 2, to select the character, press M or m.

Deleting the custom name

1 Select the unit that has stored the custom name

you want to delete, then press and hold

(LIST).

2 Press and hold (DSPL) .

The stored name will flash.

3 Press the volume +/– button repeatedly to

select the name you want to delete.

4 Press and hold (SEL).

The name is deleted. Repeat steps 3 and 4 to

delete other names.

5 Press and hold (LIST).

The unit returns to normal play mode.

LPF*

4

(Low Pass Filter)

To select the cut-off frequency “78HZ,”

“125HZ” or “OFF” (

z).

To skip Press (1)/(2)

group and release (hold for a

moment).

group

continuously

within 2 seconds of first

releasing.

discs repeatedly.

discs

continuously

then, press again within 2

seconds and hold.

Select To play

REP-DISC*

1

disc repeatedly.

SHUF-

CHGR*

1

tracks in the changer in random

order.

SHUF-ALL*

2

tracks in all units in random

order.

Disc number Unit number

13

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

With the card remote commander

In step 3, to select the name, press M or m.

Locating a disc by name — list-up

You can select a disc from the list when

connecting a CD changer with the CUSTOM

FILE function or an MD changer.

If you assign a name to a disc, the name appears

on the list.

1 During playback, press (LIST).

The disc number or disc name appears.

2 Press (LIST) repeatedly until the desired disc

appears.

After 5 seconds, the unit returns to normal

play mode.

3 Press (SEEK) +/– to play the disc.

With the card remote commander

In step 2, to select the disc, press M or m.

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• PRESET/DISC control

To select preset stations; control CD, the same

as (1)/(2) –/+ on the unit (push in and rotate).

• VOL control

The same as the volume +/– button on the unit

(rotate).

• SEEK/AMS control

The same as (SEEK) +/– on the unit (rotate, or

rotate and hold).

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

S

E

L

DSPL

MODE

S

E

L

D

S

P

L

M

O

D

E

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/DISC

To increase

To decrease

14

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power aerial will extend automatically while the

unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm CDs.

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the centre out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analogue discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection technologies are marketed by

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

About MP3 files

MP3, which stands for MPEG-1 Audio Layer-3, is a

music file compression format standard. It

compresses audio CD data to approximately 1/10 of

its original size.

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, ID3 tag version 1.0, 1.1, 2.2, 2.3 and 2.4,

and Multi Session.

• The maximum number of:

– folders (groups): 150 (including root and empty

folders).

– MP3 files (tracks) and folders contained in a

disc: 300 (if a folder/file names contain many

characters, this number may become less than

300).

– displayable characters for a folder/file name is

32 (Joliet), or 32/64 (Romeo); ID3 tag is 15/30

characters (1.0, 1.1, 2.2 and 2.3), or 63/126

characters (2.4).

15

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

Playback order of MP3 files

Notes

• Be sure to finalize the disc before using on the unit.

• When naming an MP3 file, be sure to add the file

expansion “.mp3” to the file name.

• If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

• During playback of a VBR (variable bit rate) MP3 file

or fast-forward/reverse, elapsed playing time may

not display accurately.

• When the disc is recorded in Multi Session, only the

first track of the first session format is recognized

and played (any other format is skipped). The

priority of the format is CD-DA, ATRAC CD and

MP3.

– When the first track is a CD-DA, only CD-DA of the

first session is played.

– When the first track is not a CD-DA, an ATRAC CD

or MP3 session is played. If the disc has no data in

any of these formats, “NO MUSIC” is displayed.

About ATRAC CD

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

ATRAC CD

ATRAC CD is recorded audio CD data which is

compressed to ATRAC3 or ATRAC3plus format

using authorized software, such as SonicStage 2.0 or

later, or SonicStage Simple Burner.

• The maximum number of:

– folders (groups): 255

– files (tracks): 999

• The characters for a folder/file name and text

information written by SonicStage is displayed.

For details on ATRAC CD, see the SonicStage or

SonicStage Simple Burner manual.

Note

Be sure to create the ATRAC CD using authorized

software, such as SonicStage 2.0 or later, or

SonicStage Simple Burner 1.0 or 1.1, which are

supplied with Sony Network products.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Folder

(group)

MP3 file

(track)

MP3

continue to next page t

1

2

c

+ side up

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10A)

16

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 4)

and clean the connectors with a cotton swab dipped

in alcohol. Do not apply too much force. Otherwise,

the connectors may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 4).

2 Engage the release keys together with the

protection collar.

3 Pull out the release keys to remove the

protection collar.

2 Remove the unit.

1Insert both release keys simultaneously

until they click.

2Pull the release keys to unseat the unit.

3Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range: 87.5 – 108.0 MHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz

LW: 153 – 279 kHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: MW: 30 µV, LW: 40 µV

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 50 W × 4 (at 4 ohms)

Main unit

Back of the front panel

Orient the release

keys as shown.

Hook facing

inwards.

17

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

General

Outputs:

Audio outputs terminal (front, sub/rear switchable)

Power aerial relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

BUS control input terminal

BUS audio input terminal

Remote controller input terminal

Aerial input terminal

Tone controls:

Low: ±10 dB at 60 Hz (XPLOD)

Mid: ±10 dB at 1 kHz (XPLOD)

High: ±10 dB at 10 kHz (XPLOD)

Power requirements: 12 V DC car battery

(negative earth)

Dimensions: Approx. 178 × 50 × 181 mm (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 161 mm

(w/h/d)

Mass: Approx. 1.2 kg

Supplied accessories:

Card remote commander: RM-X151

Parts for installation and connections (1 set)

Front panel case (1)

Optional accessories/equipment:

Rotary commander: RM-X4S

BUS cable (supplied with an RCA pin cord):

RC-61 (1 m), RC-62 (2 m)

CD changer (10 discs): CDX-757MX

CD changer (6 discs): CDX-T70MX, CDX-T69

MD changer (6 discs): MDX-66XLP

Source selector: XA-C30

AUX-IN selector: XA-300

Note

This unit cannot be connected to a digital preamplifier

or an equalizer which is Sony BUS system compatible.

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

US and foreign patents licensed from Dolby

Laboratories.

• Lead-free solder is used for soldering certain parts.

(more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• VOC (Volatile Organic Compound)-free vegetable

oil based ink is used for printing the carton.

• Packaging cushions do not use polystyrene foam.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order, check

the fuse.

• If the unit is turned off and the display disappears, it

cannot be operated with the remote commander.

t Turn on the unit.

The power aerial does not extend.

The power aerial does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone ATT

function (when the interface cable of a car telephone

is connected to the ATT lead) is activated.

• The position of the fader control (FAD) is not set for

a 2-speaker system.

• The CD changer is incompatible with the disc format

(MP3/ATRAC CD).

t Play back with a Sony MP3 compatible CD

changer, or this unit.

No beep sound.

• The beep sound is cancelled (page 11).

• An optional power amplifier is connected and you are

not using the built-in amplifier.

The contents of the memory have been erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

key is switched.

The leads are not matched correctly with the car’s

accessory power connector.

The display disappears from/does not appear

in the display window.

• The dimmer is set “DIM-ON” (page 11).

• The display disappears if you press and hold (OFF).

t Press and hold (OFF) again until the display

appears.

• The connectors are dirty (page 16).

DSO does not function.

Depending on the type of car interior or type of music,

DSO may not have a desirable effect.

CD/MD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use (page 14).

MP3 files cannot be played back.

The disc is incompatible with the MP3 format and

version (page 14).

continue to next page t

18

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Left

Error displays/Messages

MP3 files take longer to play back than others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software, such

as SonicStage or SonicStage Simple Burner.

• Tracks that are not included in the group cannot be

played.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “A.SCRL” is set to off.

tSet “A.SCRL-ON” (page 11) or press (SCRL) on

the card remote commander.

The sound skips.

• Installation is not correct.

tInstall the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

“MS” or “MD” does not appear on the source

display when both the optional MGS-X1 and

MD changer are connected.

This unit recognizes MGS-X1 as an MD unit.

t Press (SOURCE) until “MS” or “MD” appears,

then press (MODE) repeatedly.

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power

supply lead of a car’s aerial booster (only when your

car has built-in FM/MW/LW aerial in the rear/side

glass).

• Check the connection of the car aerial.

• The auto aerial will not go up.

tCheck the connection of the power aerial control

lead.

• Check the frequency.

• When the DSO mode is on, the sound is sometimes

hampered by noises.

tSet the DSO mode to “OFF” (page 7).

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

tTuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

tTuning does not stop at a station:

Press (SENS) repeatedly until “MONO-ON” or

“MONO-OFF” (FM), or “LOCAL-OFF” (MW/

LW) appears.

• The broadcast signal is too weak.

tPerform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM programme broadcast in stereo is heard

in monaural.

The unit is in monaural reception mode.

t Press (SENS) until “MONO-OFF” appears.

RDS

The SEEK starts after a few seconds of

listening.

The station is non-TP or has weak signal.

t Deactivate TA (page 9).

No traffic announcements.

• Activate TA (page 9).

• The station does not broadcast any traffic

announcements despite being TP.

t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.

• RDS data has not been received.

• The station does not specify the programme type.

BLANK*

1

Tracks have not been recorded on the MD.*

2

t Play an MD with recorded tracks.

ERROR*

1

• The disc is dirty or inserted upside down.*

2

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

The speaker/amplifier connection is incorrect.

t See the supplied installation/connections manual to

check the connection.

LOAD

The changer is loading the disc.

t Wait until loading is complete.

L.SEEK +/–

The local seek mode is on during automatic tuning.

NO AF

There is no alternative frequency for the current

station.

t Press (SEEK) +/– while the station name is

flashing. The unit starts searching for another

frequency with the same PI (Programme

Identification) data (“PI SEEK” appears).

NO DATA

All custom names have been deleted, or none are

stored.

NO DISC

The disc is not inserted in the CD/MD changer.

t Insert discs in the changer.

NO ID3

ID3 tag information is not written in the MP3 file.

19

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2349097111\234909711CDXF5550EUR\01GB02CD-EUR.fm masterpage:Right

*1 If an error occurs during playback of a CD or MD,

the disc number of the CD or MD does not appear

in the display.

*2 The disc number of the disc causing the error

appears in the display.

If these solutions do not help improve the situation,

consult your nearest Sony dealer.

If you take the unit to be repaired because of CD

playback trouble, bring the disc that was used at the

time the problem began.

NO INFO

Text information is not written in the ATRAC3/

ATRAC3plus file.

NO MAG

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO MUSIC

The disc is not a music file.

tInsert a music CD in this unit or MP3 playable

changer.

NO TP

The unit will continue searching for available TP

stations.

NO NAME

A track/group/disc name is not written in the track.

NOT READ

The disc information has not been read by the unit.

tLoading the disc, then select it on the list.

NOTREADY

The lid of the MD changer is open or the MDs are not

inserted properly.

tClose the lid or insert the MDs properly.

OFFSET

There may be an internal malfunction.

tCheck the connection. If the error indication

remains on in the display, consult your nearest

Sony dealer.

READ

The unit is reading all track and group information on

the disc.

tWait until reading is complete and playback starts

automatically. Depending on the disc structure, it

may take more than a minute.

RESET

The CD unit and CD/MD changer cannot be operated

because of some problem.

tPress the RESET button (page 4).

“ ” or “ ”

During fast-forward or reverse, you have reached the

beginning or the end of the disc and you cannot go any

further.

“ ”

The character cannot be displayed with the unit.

2

CDX-F5550

2-349-097-11 (1)

H:\Data Disk\2349097111\234909711CDXF5550EUR\02DE01INT-EUR.fm masterpage:Left

Willkommen!

Danke, dass Sie sich für diesen CD-Player von

Sony entschieden haben. Mit diesem Gerät

stehen Ihnen im Auto die folgenden Funktionen

zur Verfügung.

• CD-Wiedergabe

Wiedergabe von CD-DAs (auch solche mit CD

TEXT*), CD-Rs/CD-RWs (MP3-Dateien, auch

auf Multisession-CDs (

Seite 15)) sowie

ATRAC-CDs (ATRAC3- und ATRAC3plus-

Format (

Seite 15)).

• Radioempfang

–Für jeden Frequenzbereich (FM1 (UKW1),

FM2 (UKW2), FM3 (UKW3), MW und LW)

können Sie bis zu 6 Sender speichern.

–BTM-Funktion (Best Tuning Memory -

Speicherbelegungsautomatik): Das Gerät

wählt die Sender mit den stärksten Signalen

aus und speichert diese.

• RDS-Funktionen

Sie können die RDS-Dienste von UKW-

Sendern nutzen, die RDS-Signale (Radio Data

System) ausstrahlen.

• Klangeinstellungen

–EQ3: Sie können für 7 Musiktypen eine

spezielle Equalizer-Kurve auswählen.

–DSO (Dynamic Soundstage Organizer):

Mithilfe virtueller Lautsprecher wird auch bei

niedrig in der Tür montierten Lautsprechern

eine bessere Raumklangwirkung erzeugt.

• Bedienung eines gesondert erhältlichen

Geräts

Sie können nicht nur die Wiedergabe mit

diesem Gerät, sondern auch gesondert

erhältliche CD/MD-Wechsler steuern.

* Eine CD mit CD TEXT ist eine CD-DA, die

Informationen wie den Namen der CD, den Namen

des Interpreten und die Namen der Titel enthält.

SonicStage und das entsprechende Logo sind

Markenzeichen der Sony Corporation.

ATRAC, ATRAC3, ATRAC3plus und die

entsprechenden Logos sind Markenzeichen der

Sony Corporation.

CD-Typ Beschriftung auf der CD

CD-DA

MP3

ATRAC-CD

Warnhinweis, wenn die Zündung Ihres

Fahrzeugs nicht über eine

Zubehörposition (ACC oder I) verfügt

Nachdem Sie die Zündung ausgeschaltet

haben, halten Sie am Gerät unbedingt (OFF)

gedrückt, bis die Anzeige ausgeblendet wird.

Andernfalls wird die Anzeige nicht

ausgeschaltet und der Autobatterie wird

Strom entzogen.

Dieses Etikett befindet sich an der Unterseite

des Gehäuses.

La pagina sta caricando ...

Sony CDX-F5550 Manuale del proprietario

Sony CDX-F5550 Manuale del proprietario

in altre lingue

Documenti correlati