Indesit CAA 55 NX 1 Guida utente

Categoria
Frigo-congelatori
Tipo
Guida utente
I
Istruzioni per l’uso
COMBINATO FRIGORIFERO/CONGELATORE
CA 55 NX
CAA 55 NX
Sommario
Installazione, 2-3
Posizionamento e collegamento
Reversibilità apertura porte
Descrizione dell’apparecchio, 4
Vista d’insieme
Avvio e utilizzo, 5-6
Avviare l’apparecchio
Utilizzare al meglio il frigorifero
Utilizzare al meglio il congelatore
Manutenzione e cura, 7
Escludere la corrente elettrica
Pulire l’apparecchio
Evitare muffe e cattivi odori
Sbrinare l’apparecchio
Sostituire la lampadina
Precauzioni e consigli, 8
Sicurezza generale
Smaltimento
Risparmiare e rispettare l’ambiente
Anomalie e rimedi, 9
Assistenza, 10
Assistenza attiva 7 giorni su 7
Italiano, 1 English, 11
GBI
Portuges, 31
P
Espanol, 21
E
Română, 41
RO
Polski,
51
PL
Magyar, 61
HU
Česky, 71
CZ
Français, 81
F
I
2
Installazione
! È importante conservare questo libretto per poterlo
consultare in ogni momento. In caso di vendita,
di cessione o di trasloco, assicurarsi che resti insieme
all’apparecchio per informare il nuovo proprietario
sul funzionamento e sui relativi avvertimenti.
! Leggere attentamente le istruzioni: ci sono importanti
informazioni sull’installazione, sull’uso e sulla sicurezza.
Posizionamento e collegamento
Posizionamento
1. Posizionare l’apparecchio in un ambiente ben aerato e non
umido.
2. Non ostruire le griglie posteriori di ventilazione:
compressore e condensatore emettono calore e
richiedono una buona aerazione per funzionare bene e
contenere i consumi elettrici.
3. Lasciare una distanza di almeno 10 cm tra la parte
superiore dell’apparecchio ed eventuali mobili sovrastanti
e di almeno 5 cm tra le fiancate e mobili/pareti laterali.
4. Lasciare l’apparecchio lontano da fonti di calore (la luce
solare diretta, una cucina elettrica).
5. Per mantenere una ottimale distanza del prodotto dalla
parete posteriore, montare i distanzieri presenti nel kit
di installazione seguendo le istruzioni presenti sul foglio
dedicato.
Livellamento
1. Installare l’apparecchio su un pavimento piano e rigido.
2. Se il pavimento non fosse perfettamente orizzontale,
compensare svitando o avvitando l’unico piedino di
regolazione anteriore.
Collegamento elettrico
Dopo il trasporto, posizionare l’apparecchio verticalmente
e attendere almeno 3 ore prima di collegarlo all’impianto
elettrico. Prima di inserire la spina nella presa della corrente,
accertarsi che:
la presa abbia la messa a terra e sia a norma di legge;
la presa sia in grado di sopportare il carico massimo
di potenza della macchina, indicato nella targhetta
caratteristiche posta nel vano frigorifero in basso a
sinistra (es 150 W);
la tensione di alimentazione sia compresa nei valori
indicati nella targhetta caratteristiche, posta in basso a
sinistra (es 220-240 V);
la presa sia compatibile con la spina dell’apparecchio. In
caso contrario richiedere la sostituzione della spina a un
tecnico autorizzato (vedi Assistenza); non usare prolunghe
e multiple.
! Ad apparecchio installato, il cavo elettrico e la presa della
corrente devono essere facilmente raggiungibili.
! Il cavo non deve subire piegature o compressioni.
! Il cavo deve essere controllato periodicamente e sostituito
solo da tecnici autorizzati (vedi Assistenza).
! L’azienda declina ogni responsabilità qualora queste
norme non vengano rispettate.
I
3
Reversibilità apertura porte
Attenzione: prima di provare a rimuovere le porte, spegnere l’alimentatore e staccare la spina di rete.
Nell’eseguire questa operazione, è consigliabile rimuovere qualunque elemento/accessorio sfuso dall’interno dell’apparecchio e
inserire gli alimenti in contenitori isolati.
Potrebbe essere necessaria assistenza per poggiare con attenzione la parte posteriore dell’apparecchio su materiali protettivi
idonei (ad esempio, l’imballaggio originale).
Rimozione delle porte
1. Poggiare l’apparecchio sulla
parte posteriore.
2. Svitare, estrarre e conservare la
cerniera inferiore.
3. Aprire leggermente la porta
inferiore e farla scivolare verso il
basso; rimuoverla e appoggiarla
attentamente da un lato.
4. Rimuovere la cerniera centrale
e il distanziale, se presente.
Aprire leggermente la porta
superiore e farla scivolare
verso il basso; rimuoverla e
appoggiarla attentamente da un
lato.
5. l perno sarà rimosso e fissato
sul lato opposto.
6. Usare uno strumento sottile e
smussato per rimuovere dalle
porte le boccole delle cerniere
superiori ed inferiori e gli
sbozzatori, facendo attenzione
a non rigare la maniglia. Riposizionare gli sbozzatori e le boccole nel lato opposto.
7. Inserire gli sbozzatori in dotazione all’interno dei due fori d’incernieramento centrali dal lato destro.
8. Prima di spostare la cerniera dal lato destro al lato sinistro, la vite sul pannello del lato sinistro deve essere smontata e montata
sul pannello del lato destro dopo aver spostato la cerniera.
Riposizionamento delle porte
1. Far scivolare la porta superiore verso l’alto e inserire il perno d’incernieramento superiore all’interno della boccola della porta.
Riposizionare la cerniera centrale nel lato opposto.
2. Far scivolare attentamente verso l’altro la porta inferiore all’interno del perno d’incernieramento centrale.
3. Svitare il perno d’incernieramento
inferiore e riposizionarlo nel lato
opposto.
4. Fissare la cerniera inferiore
assicurandosi che la porta sia
allineata al mobile.
5. Mettere attentamente l’apparecchio
in posizione verticale nel punto
richiesto e assicurarsi che sia bene
in piano. Aprire e chiudere le porte
per controllare che la guarnizione
garantisca un’adeguata tenuta senza
fessure quando le porte sono chiuse.
NOTA: reinserire gli elementi/accessori
sfusi nell’apparecchio e aspettare
almeno 15 minuti prima di riaccendere.
I
4
Descrizione
dell’apparecchio
Vista d’insieme
Le istruzioni sull’uso valgono per diversi modelli per cui è possibile che la figura presenti particolari differenti rispetto a quelli
dell’apparecchio acquistato. La descrizione degli oggetti più complessi si trova nelle pagine seguenti.
Manopola
REGOLAZIONE DELLA
TEMPERATURA
RIPIANO•
Cassetto
FRUTTA e VERDURA
Vano
CONGELAMENTO e
CONSERVAZIONE
Vano
CONSERVAZIONE
Bacinella
GHIACCIO
Balconcino estraibile
con coperchio con
PORTAUOVA *
Balconcino estraibile
PORTAOGGETTI
Balconcino
BOTTIGLIE
Scomparto
BOTTIGLIA da 2 LITRI
PIEDINO
di regolazione
Esiste un solo piedino di regolazione.
Variabili per numero e/o per posizione.
* Presente solo in alcuni modelli.
I
5
Avvio e utilizzo
Avviare l’apparecchio
! Prima di avviare l’apparecchio, seguire
le istruzioni sull’installazione (vedi Installazione).
! Prima di collegare l’apparecchio pulire bene i vani
e gli accessori con acqua tiepida e bicarbonato.
1. Inserire la spina nella presa e accertarsi che si accenda la
lampada di illuminazione interna.
2. Ruotare la manopola per LA REGOLAZIONE DELLA
TEMPERATURA su un valore medio. Dopo qualche ora sarà
possibile inserire alimenti nel frigorifero.
Utilizzare al meglio il frigorifero
La temperatura all’interno del reparto frigorifero si regola
automaticamente in base alla posizione della manopola del
termostato.
1 = meno freddo
5 = più freddo
Si consiglia, comunque, una posizione media
Per aumentare lo spazio e disposizione e migliorare l’aspetto
estetico, questo apparecchio ha la “parte raffreddante”
posizionata all’interno della parete posteriore del reparto
frigo. Tale parete, durante il funzionamento, si presenterà
coperta di brina, oppure di goccioline di acqua a secondo se
il compressore è in funzione o in pausa. Non preoccupatevi di
questo! Il frigorifero sta lavorando in modo normale.
Se si imposta la manopola FUNZIONAMENTO FRIGORIFERO
su valori alti, con grossi quantitativi di alimenti e con una
temperatura ambiente elevata, l’apparecchio può funzionare
di continuo, favorendo un’eccessiva formazione di brina ed
eccessivi consumi elettrici: ovviare spostando la manopola
verso i valori più bassi (verrà effettuato uno sbrinamento
automatico).
Negli apparecchi statici l’aria circola in modo naturale: quella
più fredda tende a scendere perché più pesante. Ecco come
sistemare gli alimenti:
Indicatore TEMPERATURA*: per individuare la zona più fredda
del frigorifero.
1. Controllare che sull’indicatore risulti ben evidente OK (vedi
figura).
2. Se non compare la scritta OK significa che la temperatura
è troppo elevata: regolare la manopola FUNZIONAMENTO
FRIGORIFERO su una posizione più alta (più freddo) e
attendere circa 10 h finché la temperatura si sia stabilizzata.
3. Controllare nuovamente l’indicatore: se necessario,
procedere con una nuova regolazione. Se si sono introdotte
grosse quantità di alimenti o si è aperta frequentemente la
porta del frigorifero, è normale che l’indicatore non segni
OK. Attendere almeno 10 h prima di regolare la manopola
FUNZIONAMENTO FRIGORIFERO su una posizione più
alta.• Inserire soltanto alimenti freddi o appena tiepidi, non
caldi (vedi Precauzioni e consigli).
Ricordarsi che gli alimenti cotti non si mantengono più a
lungo di quelli crudi.
Non inserire liquidi in recipienti scoperti: provocherebbero
un aumento di umidità con conseguente formazione di
condensa.
RIPIANI: pieni o a griglia.
Sono estraibili e regolabili in altezza grazie alle apposite guide
(vedi figura), per l’inserimento di contenitori
o alimenti di notevole dimensione. Per regolare l’altezza non è
necessario estrarre completamente il ripiano
I
6
Utilizzare al meglio il congelatore
Non ricongelare alimenti che stanno per scongelare o
scongelati; tali alimenti devono essere cotti per essere
consumati (entro 24 ore).
Gli alimenti freschi da congelare non devono essere posti a
contatto con quelli già congelati; vanno sistemati nel vano
superiore CONGELAMENTO e CONSERVAZIONE dove la
temperatura scende sotto i -18°C e garantisce una buona
velocità di congelamento.
Non mettere nel congelatore bottiglie di vetro contenenti liquidi,
tappate o chiuse ermeticamente, perché potrebbero rompersi.
La quantità massima giornaliera di alimenti da congelare è
indicata sulla targhetta caratteristiche, posta nel vano frigorifero
in basso a sinistra (esempio: Kg/24h 4).
Al fine di ottenere un spazio maggiore nel reparto freezer potete
togliere i cassetti dalle loro sedi (tranne quello più in basso
e l’eventuale cassetto COOL CARE ZONE a temperatura
variabile), sistemando gli alimenti direttamente sulle piastre
evaporanti.
! Durante il congelamento evitare di aprire la porta.
! In caso di interruzione di corrente o di guasto,
non aprire la porta del congelatore: in questo modo congelati e
surgelati si conserveranno senza alterazioni per circa 9-14 ore.
! Se per lungo tempo permane la temperatura ambiente
più fredda di 14°C, non si raggiungono completamente le
temperature necessarie per una lunga conservazione nel
reparto freezer e il periodo di conservazione risulterà pertanto
ridotto.
Bacinella GHIACCIO
La collocazione sulla parte superiore dei cassetti ripisti nel vano
freezer garantisce una maggior pulizia (il ghiaccio non viene più
a contatto con gli alimenti) ed ergonomia (non si sgocciola in
fase di caricamento).
1. Verificare che la bacinella sia completamente vuota e
riempirla d’acqua attraverso l’apposito foro.
2. Fare attenzione a non superare il livello indicato (MAX WATER
LEVEL). Troppa acqua ostacola la fuoriuscita dei ghiaccioli
(se succede, attendere che il ghiaccio si sciolga e svuotare
la bacinella).
3. Ruotare la bacinella di 90°: l’acqua riempie le forme per il
principio dei vasi comunicanti (vedi figura).
4. Chiudere il foro con il coperchio in dotazione e riporre la
bacinella.
5. Quando il ghiaccio sarà formato (tempo minimo circa 8
ore) battere la bacinella su una superficie dura e bagnarne
l’esterno per far staccare i ghiaccioli; farli poi uscire dal foro.
MAX
WATER LEVEL
MAX
WATER LEVEL
I
7
Manutenzione e cura
Escludere la corrente elettrica
Durante i lavori di pulizia e manutenzione è necessario isolare
l’apparecchio dalla rete di alimentazione staccando la spina
dalla presa.
Non è sufficiente portare la manopola per la regolazione della
temperatura sulla posizione (apparecchio spento) per
eliminare ogni contatto elettrico.
Pulire l’apparecchio
Le parti esterne, le parti interne e le guarnizioni in gomma
possono essere pulite con una spugnetta imbevuta di acqua
tiepida e bicarbonato di sodio o sapone neutro. Non usare
solventi, abrasivi, candeggina o ammoniaca.
Gli accessori estraibili possono essere messi a bagno in
acqua calda e sapone o detersivo per piatti. Sciacquarli e
asciugarli con cura.
Il retro dell’apparecchio tende a coprirsi di polvere, che
può essere eliminata utilizzando con delicatezza, dopo
aver spento l’apparecchio e staccato la presa di corrente,
la bocchetta lunga dell’aspirapolvere, impostato su una
potenza media.
Evitare muffe e cattivi odori
L’apparecchio è fabbricato con materiali igienici
che non trasmettono odori. Per mantenere questa
caratteristica è necessario che i cibi vengano sempre protetti
e chiusi bene. Ciò eviterà anche
la formazione di macchie.
Nel caso si voglia spegnere l’apparecchio per un lungo
periodo, pulire l’interno e lasciare le porte aperte.
Sbrinare l’apparecchio
! Attenersi alle istruzioni sottostanti.
Per sbrinare l’apparecchio non usare oggetti taglienti ed
appuntiti che potrebbero danneggiare irreparabilmente il
circuito refrigerante..
Sbrinare il vano frigorifero
Il frigorifero è dotato di sbrinamento automatico: l’acqua viene
convogliata verso la parte posteriore da un apposito foro di
scarico (vedi figura) dove il calore prodotto dal compressore la
fa evaporare. L’unico intervento da fare periodicamente consiste
nel pulire il foro di scarico affinché l’acqua possa defluire
liberamente.
Sbrinare il vano congelatore
Se lo strato di brina è superiore ai 5 mm è necessario effettuare
lo sbrinamento manuale:
1. posizionare la manopola per LA REGOLAZIONE DELLA
TEMPERATURA nella posizione .
2. Avvolgere surgelati e congelati in carta da giornale e metterli
in un altro congelatore o in un luogo fresco.
3. Lasciare aperta la porta finché la brina non si sia sciolta
completamente; facilitare l’operazione sistemando nel vano
congelatore contenitori con acqua tiepida.
4. Pulire e asciugare con cura il vano congelatore prima di
riaccendere l’apparecchio.
5. Prima di inserire i cibi nel vano congelatore attendere circa 2
ore per il ripristino delle condizioni ideali di conservazione.
Sostituire la lampadina
Per sostituire la lampadina di illuminazione del vano frigorifero,
staccare la spina dalla presa di corrente. Seguire le istruzioni
riportate qui sotto.
Accedere alla lampada togliendo la protezione come indicato
in figura.
Sostituirla con una analoga di potenza a quella indicata sulla
protezione (15 W o 25 W).
I
8
Precauzioni e consigli
! L’apparecchio è stato progettato e costruito
in conformità alle norme internazionali di sicurezza. Queste
avvertenze sono fornite per ragioni
di sicurezza e devono essere lette attentamente.
Questa apparecchiatura è conforme
alle seguenti Direttive Comunitarie:
- 73/23/CEE del 19/02/73 (Bassa Tensione)
e successive modificazioni;
- 89/336/CEE del 03/05/89 (Compatibilità
Elettromagnetica) e successive modificazioni.
- 2002/96/CE..
Sicurezza generale
L’apparecchio è stato concepito per un uso di tipo non
professionale all’interno dell’abitazione.
L’apparecchio deve essere usato per conservare
e congelare cibi, solo da persone adulte e secondo le
istruzioni riportate in questo libretto.
L’apparecchio non va installato all’aperto, nemmeno se lo
spazio è riparato, perché è molto pericoloso lasciarlo esposto
a pioggia e temporali.
Non toccare l’apparecchio a piedi nudi o con le mani o i piedi
bagnati o umidi.
Non toccare le parti interne raffreddanti: c’è pericolo di
ustionarsi o ferirsi.
Non staccare la spina dalla presa della corrente tirando il
cavo, bensì afferrando la spina.
È necessario staccare la spina dalla presa prima di effettuare
operazioni di pulizia e manutenzione. Non è sufficiente
portare le manopole per la regolazione della temperatura
sulla posizione (apparecchio spento) per eliminare ogni
contatto elettrico.
In caso di guasto, in nessun caso accedere ai meccanismi
interni per tentare una riparazione.
Ne pas utiliser, à l’intérieur des compartiments de
conservation pour aliments congelés, d’ustensiles pointus et
coupants ou d’appareils électriques d’un type autre que celui
recommandé par le fabricant.
Non mettere in bocca cubetti appena estratti dal congelatore.
Questo apparecchio non è da intendersi adatto all’uso da
parte di persone (incluso bambini) con ridotte capacità
fisiche, sensoriali o mentali, o prive di esperienza e
conoscenza, a meno che siano state supervisionate o
istruite riguardo all’uso dell’apparecchio da una persona
responsabile della loro sicurezza. I bambini dovrebbero
essere supervisionati per assicurarsi che non giochino con
l’apparecchio.
Gli imballaggi non sono giocattoli per bambini.
Smaltimento
Smaltimento del materiale di imballaggio: attenersi alle norme
locali, così gli imballaggi potranno essere riutilizzati.
La direttiva Europea 2012/19/EU sui rifiuti di
apparecchia¬ture elettriche ed elettroniche (RAEE), prevede
che gli elettrodo¬mestici non debbano essere smaltiti
nel normale flusso dei rifiuti solidi urbani. Gli apparecchi
dismessi devono essere raccolti separatamente per
ottimizzare il tasso di recupero e riciclaggio dei materiali che
li compongono ed impedire potenziali danni per la salute
e l’ambiente. Il simbolo del cestino barrato è riportato su
tutti i prodotti per ricordare gli obblighi di raccolta separata.
Quando si acquista una nuova apparecchiatura equivalente
si può consegnare il RAEE al negoziante, che è tenuto a
ritirarlo gratuitamente; i RAEE di “piccolissime dimensioni”
(nessun lato sopra i 25 cm) possono essere consegnati
gratuitamente ai negozianti anche se non si acquista nulla
(solo nei negozi con superficie di vendita superiore a 400
mq). Per ulteriori informazioni sulla corretta dismissione degli
elettrodomestici i detentori potranno rivolgersi al servizio
pubblico preposto o ai rivenditori.
Risparmiare e rispettare l’ambiente
Installare l’apparecchio in un ambiente fresco e ben aerato,
proteggerlo dall’esposizione diretta ai raggi solari, non
disporlo vicino a fonti di calore.
Per introdurre o estrarre gli alimenti, aprire le porte
dell’apparecchio il più brevemente possibile.
Ogni apertura delle porte causa un notevole dispendio di
energia.
Non riempire con troppi alimenti l’apparecchio:
per una buona conservazione, il freddo deve
poter circolare liberamente. Se si impedisce la circolazione, il
compressore lavorerà continuamente.
Non introdurre alimenti caldi: alzerebbero la temperatura
interna costringendo il compressore a un grosso lavoro, con
grande spreco di energia elettrica.
Sbrinare l’apparecchio qualora si formasse del ghiaccio (vedi
Manutenzione); uno spesso strato
di ghiaccio rende più difficile la cessione di freddo
agli alimenti e fa aumentare il consumo di energia.
Mantenere efficienti e pulite le guarnizioni, in modo che
aderiscano bene alle porte e non lascino uscire il freddo
(vedi Manutenzione).
I
9
Anomalie e rimedi
Può accadere che l’apparecchio non funzioni. Prima di telefonare all’Assistenza (vedi Assistenza), controllare
che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco.
Possibili cause / Soluzione:
La spina non è inserita nella presa della corrente o non abbastanza da fare
contatto, oppure in casa non c’è corrente.
Le porte non chiudono bene o le guarnizioni sono rovinate.
Le porte vengono aperte molto spesso.
La manopola per LA REGOLAZIONE DELLA TEMPERATURA non è in posizione
corretta
Il frigorifero o il congelatore sono stati riempiti eccessivamente.
La temperatura ambiente di lavoro del prodotto è inferiore a 14°C.
La manopola per LA REGOLAZIONE DELLA TEMPERATURA non è in posizione
corretta.
Gli alimenti sono a contatto con la parete posteriore.
La porta non è ben chiusa o viene aperta di continuo.
La temperatura dell’ambiente esterno è molto alta.
Lo spessore della brina supera i 2-3 mm (vedi Manutenzione).
L’apparecchio non è stato installato ben in piano (vedi Installazione).
L’apparecchio è stato installato tra mobili o oggetti che vibrano
ed emettono rumori.
Il gas refrigerante interno produce un leggero rumore anche quando
il compressore è fermo: non è un difetto, è normale.
Le temperature elevate sono necessarie per evitare la formazioni di condensa in
particolari zone del prodotto
Si tratta del normale funzionamento del prodotto.
Il foro di scarico dell’acqua è otturato (vedi Manutenzione).
Se la porta del vano dispensa rimane aperta per periodi troppo lunghi,
si possono formare umidità o ghiaccio in eccesso. Il problema si
risolverà non appena la porta verrà chiusa e si permetterà al vano
dispensa di sbrinarsi, eliminando l’umidità presente. Si tratta di
una situazione normale per la funzione di raffreddamento del vano
dispensa, soprattutto nel periodo estivo.
Se la temperatura ambiente è uguale o inferiore a 16°C, ad esempio
quando il frigorifero è installato in un garage o in un luogo aperto, è
necessario che l’interruttore si trovi in posizione ON affinché il frigorifero
funzioni correttamente
Anomalie:
La lampada di illuminazione interna
non si accende.
Il frigorifero e il congelatore
raffreddano poco.
Nel frigorifero gli alimenti
si gelano.
Il motore funziona di continuo.
L’apparecchio emette
molto rumore.
La temperatura di alcune parti esterne
del frigorifero è elevata.
La parete in fondo alla cella frigo presenta
brina o goccioline di acqua.
Sul fo
ndo del frigo c’è dell’acqua.
Umidità o ghiaccio eccessivo nel retro
del frigorifero.
Frigorifero caldo.
Switch
Assistenza
GB
REFRIGERATOR/FREEZER COMBINATION
Operating Instructions
Contents
Installation, 12-13
Positioning and connection
Door reversal
Description of the appliance, 14
Overall view
Start-up and use, 15-16
Starting the appliance
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 17
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Replacing the light bulb
Precautions and tips, 18
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 19
Assistance, 20
Italiano, 1 English, 11
GBI
Portuges, 31
P
Espanol, 21
E
Română, 41
RO
Polski,
51
PL
CA 55 NX
CAA 55 NX
Magyar, 61
HU
Česky, 71
CZ
Français, 81
F
GB
12
Installation
! Before placing your new appliance into operation
please read these operating instructions carefully. They
contain important information for safe use, for installation
and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part
of the appliance and any furniture above it, and at least
5 cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between
the appliance and the wall behind it, fit the spacers
supplied in the installation kit, following the instructions
provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, make the
necessary adjustments by tightening or loosening the
single foot at the front of the appliance.
Electrical connections
After the appliance has been transported, carefully place
it vertically and wait at least 3 hours before connecting it
to the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located
on the bottom left side of the fridge (e.g. 150 W).
The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
The socket is compatible with the plug of the
appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see Assistance).
Do not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
GB
13
DOOR REVERSAL
Warning: Before attempting to remove the doors, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated containers whilst
carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original packaging).
Remove the doors
1. Lay down the appliance on its
back.
2. Unscrew, remove and retain the
bottom hinge.
3. Slightly open the bottom door
and slide downward remove and
carefully place to one side
4. Remove centre hinge and spacer
if fitted.
Slightly open the top door
and slide downwards, remove and
carefully place to one side.
5. The pin will be removed and fixed
to the
opposite side
6. Use a thin blunt instrument to
remove the top and bottom hinge
bushes and blanking plugs from
the doors, take care not to mark
the door handle. Reposition the
blanking plugs and bushes on the opposite side.
7. Fit the blanking plugs provided into the right hand two centre hinge holes.
8. Before changing hinge place from right side to left side, screw on left side panel should be disassemblied and after changing
hinge place, screw should be assemblied on right side panel.
Replacing the doors
1. Slide the top door upwards and locate the top hinge pin into the door bush. Reposition the centre hinge on the opposite side.
2. Carefully slide bottom door upward into the centre hinge pin.
3. Unscrew the bottom hinge pin and
refit it on the opposite side..
4. Fit the bottom hinge making sure that
the door is aligned to the cabinet.
5. Carefully stand the appliance upright
in it’s required location and make
sure it is sitting level on the floor.
Open and close the doors checking
that the gasket makes a good seal
without any gaps when the doors are
closed.
Note: Replace loose items/fittings back
into the appliance and leave for at least
15 minutes before switching back on.
GB
14
Description of the
appliance
TEMPERATURE
REGULATING
Knob
SHELVES
FRUIT and
VEGETABLE bin
FREEZER and
STORAGE
compartment
STORAGE
compartment
ICE tray
Removable lidded shelf
with EGG TRAY*
Removable
multipurpose
SHELVES•
BOTTLE shelf
Compartment for a
2 LITRE BOTTLE
Levelling FOOT
Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent
the appliance purchased. For more complex features, consult the following pages.
There is only one adjustable foot.
Varies by number and/or position.
* Available only on certain models.
GB
15
Start-up and use
Starting the appliance
! Before starting the appliance, follow the installation
instructions (see Installation).
! Before connecting the appliance, clean the compartments and
accessories well with lukewarm water and bicarbonate.
1. Insert the plug into the socket and ensure that the internal
light illuminates.
2. Turn the TEMPERATURE ADJUSTMENT knob to an average
value. After a few hours you will be able to put food in the
refrigerator.
Using the refrigerator to its full potential
The temperature inside the refrigerator compartment
automatically adjusts itself according to the position of the
thermostat knob.
1 = warmest 5 = coldest
We recommend, however, a medium position.
The cooling section of the refrigerator is located inside the
back wall of the refrigerator compartment for increased space
and improved aesthetics. During operation, the back wall will
be covered in frost or water droplets depending on whether
the compressor is operating or paused. Do not worry, the
refrigerator is functioning normally.
If the TEMPERATURE ADJUSTMENT knob has been set on
high values with large quantities of food and with a high ambient
temperature, the appliance can operate continuously, resulting
in excessive frost formation and excessive energy consumption:
compensate for this by shifting the knob towards lower values
(defrosting will occur automatically).
In static appliances, the air circulates in a natural way: the
colder air tends to move downwards as it is heavier. The food
should be stored as follows:
Food
Arrangement inside the
refrigerator
Fresh fish and meat
Above the fruit and vegetable bins
Fresh cheese
Above the fruit and vegetable bins
Cooked food
On any shelf
Salami, loaves of bread,
chocolate
On any shelf
Fruit and vegetables
In the fruit and vegetable
compartment bins
Eggs
On the shelf provided
Butter and margarine
On the shelf provided
Bottles, drinks, milk
On the shelves provided
Place only cold or lukewarm foods in the compartment, not
hot foods (see Precautions and tips).
Remember that cooked foods do not last longer than raw
foods.
Do not store liquids in open containers. They will increase
humidity in the refrigerator and cause condensation to form.
SHELVES: with or without grill.
Due to the special guides the shelves are removable and
the height is adjustable (see diagram), allowing easy storage
of large containers and food. Height can be adjusted without
complete removal of the shelf.
TEMPERATURE Indicator light*: to identify the coldest area in
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word “OK” does not appear it means that the
temperature is too high: adjust the REFRIGERATOR
OPERATION knob to a higher position (colder) and wait
approximately 10 hours until the temperature has been
stabilised.
3. Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK.
Wait at least 10 hours before adjusting the REFRIGERATOR
OPERATION knob to a higher setting.
GB
16
Using the freezer to its full potential
Do not re-freeze food that is defrosting or that has already
been defrosted. These foods must be cooked and eaten
(within 24 hours).
Fresh food that needs to be frozen must not come into
contact with food that has already been defrosted.
Fresh food must be stored above the grill in the freezer
compartment and if possible be in direct contact with the
walls (side and rear), where the temperature drops below
-18°C and guarantees rapid freezing.
Do not place glass bottles which contain liquids, and which
are corked or hermetically sealed in the freezer because
they could break.
• The maximum quantity of food that may be frozen
daily is indicated on the plate containing the technical
properties located on the bottom left side of the refrigerator
compartment (for example: Kg/24h: 4)
In order to obtain a greater amount of space in the freezer
compartment, you may remove the bins (except the lowest
bin and the special COOL CARE ZONE bin, which has an
adjustable temperature) and place the food directly onto the
evaporator plates.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the freezer
door. This will help maintain the temperature inside the freezer,
ensuring that foods are conserved for at least 9 -14 hours.
! If the room temperature drops below 14°C for an extended
period of time, the ideal temperature will not be reached in the
freezer compartment and food preservation will be reduced.
Ice tray
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer
comes into contact with the food placed inside the freezer
compartment; furthermore, the dripping of the water during
filling is avoided (a lid to cover up the hole after filling with water
is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is completely empty and fill it with water
through the opening provided.
2. Take care not to exceed the level indicated (MAX WATER
LEVEL). Excess water prevents the ice cubes from dispensing
(if this happens, wait for the ice to melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments each
mould fills with water (see diagram).
4. Close the opening with the lid provided and put the tray back.
5. When the ice has formed (minimum time approximately 8
hours) knock the tray against a hard surface and wet the
outside so that the ice cubes come loose and take them out
through the opening.
MAX
WATER LEVEL
MAX
WATER LEVEL
GB
17
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to disconnect
the appliance from the electricity supply:
It is not sufficient to set the temperature adjustment knobs on
(appliance off) to eliminate all electrical contact.
Cleaning the appliance
The external and internal parts, as well as the rubber seals
may be cleaned using a sponge that has been soaked in
lukewarm water and bicarbonate of soda or neutral soap. Do
not use solvents, abrasive products, bleach or ammonia.
The removable accessories may be soaked in warm water
and soap or dishwashing liquid. Rinse and dry them
carefully.
The back of the appliance may collect dust which can be
removed by delicately using the hose of a vacuum cleaner
set on medium power. The appliance must be switched
off and the plug must be pulled out before cleaning the
appliance.
Avoiding mould and unpleasant odours
• The appliance is manufactured with hygienic materials which
are odour free. In order to maintain an odour free refrigerator
and to prevent the formation of stains, food must always be
covered or sealed properly.
If you want to switch the appliance off for an extended period of
time, clean the inside and leave the doors open.
Defrosting the appliance
! Follow the instructions below.
Do not use objects with sharp or pointed edges to defrost the
appliance as these may damage the refrigeration circuit beyond
repair.
Defrosting the refrigerator compartment
The refrigerator has an automatic defrosting function: water is
ducted to the back of the appliance by a special discharge
outlet (see diagram) where the heat produced by the
compressor causes it to evaporate. It is necessary to clean the
discharge hole regularly so that the water can flow out easily.
Defrosting the freezer compartment
If the frost layer is greater than 5 mm, it is necessary to defrost
manually:
1. Set the TEMPERATURE ADJUSTMENT knob to the position
.
2. Wrap frozen foods in newspaper and place them in another
freezer or in a cool place.
3. Leave the door open until the frost has melted completely.
This can be made easier by placing containers with lukewarm
water in the freezer compartment.
4. Clean and dry the freezer compartment carefully before
switching the appliance on again.
5. Wait for approximately 2 hours, i.e. until the ideal storage
conditions have been restored, before placing food in the
freezer compartment.
Replacing the light bulb
To replace the light bulb in the refrigerator compartment, pull
out the plug from the electrical socket. Follow the instructions
below.
Access the light bulb by removing the cover as indicated in the
diagram. Replace it with a similar light bulb within the power
range indicated on the cover (15W or 25W).
GB
18
Precautions and tips
! The appliance was designed and manufactured in compliance
with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community
Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent
amendments;
-89/336/EEC of 03.05.89 (Electromagnetic
Compatibility) and subsequent amendments;
- 2002/96/CE..
General safety
The appliance was designed for domestic use inside the home
and is not intended for commercial or industrial use.
The appliance must be used to store and freeze food products
by adults only and according to the instructions in this manual.
The appliance must not be installed outdoors, even in covered
areas. It is extremely dangerous to leave the appliance exposed
to rain and storms.
Do not touch the appliance with bare feet or with wet or moist
hands and feet.
Do not touch the internal cooling elements: this could cause
skin abrasions or frost/freezer burns.
When unplugging the appliance always pull the plug from the
mains socket, do not pull on the cable.
Before cleaning and maintenance, always switch off the
appliance and disconnect it from the electrical supply. It is
not sufficient to set the temperature adjustment knobs on
(appliance off) to eliminate all electrical contact.
In the case of a malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs carried
out by inexperienced persons may cause injury or further
malfunctioning of the appliance.
Do not use any sharp or pointed utensils or electrical
equipment - other than the type recommended by the
manufacturer - inside the frozen food storage compartments.
Do not put ice cubes taken directly from the freezer into your
mouth.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack of experience
and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
Keep packaging material out of the reach of children! It can
become a choking or suffocation hazard.
Disposal
Observe local environmental standards when disposing
packaging material for recycling purposes.
The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), requires that old household
electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and
recycling of the materials they contain and reduce the impact
on human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance it must be
separately collected.
Consumers may take their old appliance to public
waste collection areas, other communal collection
areas, or if national legislation allows return it to a
retailer when purchasing a similar new product.
All major household appliance manufacturers are
active in the creation of systems to manage the
collection and disposal of old appliances.
Respecting and conserving the environment
Install the appliance in a fresh and well-ventilated room.
Ensure that it is protected from direct sunlight and do not
place it near heat sources.
Try to avoid keeping the door open for long periods or
opening the door too frequently in order to conserve energy.
Do not fill the appliance with too much food:
cold air must circulate freely for food to be preserved
properly. If circulation is impeded, the compressor will work
continuously.
Do not place hot food directly into the refrigerator. The
internal temperature will increase and force the compressor
to work harder and will consume more energy.
Defrost the appliance if ice forms (see Maintenance). A thick
layer of ice makes cold transference to food products more
difficult and results in increased energy consumption.
Regularly check the door seals and wipe clean to ensure they
are free of debris and to prevent cold air from escaping (see
Maintenance).
GB
19
Troubleshooting
If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.
Malfunctions:
The internal light does not illuminate.
The refrigerator and the freezer do not cool
well.
The food inside the refrigerator is
beginning to freeze.
The motor runs continuously.
The appliance makes a lot of noise.
Some of the external parts of the
refrigerator become hot.
The back wall of the refrigerator unit is
covered in frost or droplets of water.
There is water at the bottom of the
refrigerator.
Excess moisture / Ice at rear of the Fridge
Warm Fridge
Possible causes / Solutions:
The plug has not been inserted into the electrical socket, or not far enough to make
contact, or there is no power in the house.
The doors do not close properly or the seals are damaged.
The doors are opened too frequently.
The TEMPERATURE ADJUSTMENT knob is not in the correct position
The refrigerator or the freezer have been over-filled.
The atmospheric temperature of the area surrounding the appliance is lower than
14°C.
The TEMPERATURE ADJUSTMENT knob is not in the correct position.
The food is in contact with the back inside wall of the refrigerator.
The door is not closed properly or is continuously opened.
The outside ambient temperature is very high.
The thickness of the frost exceeds 2-3 mm (see Maintenance).
The appliance has not been installed on a level surface (see Installation).
The appliance has been installed between cabinets that vibrate and make noise.
The internal refrigerant makes a slight noise even when the compressor is off. This is
not a defect, it is normal.
These raised temperatures are necessary in order to avoid the formation of
condensation on certain parts of the product.
This shows the appliance is operating normally.
The water discharge hole is blocked (see Maintenance).
Excess moisture / Ice will occur if the Larder door is opened for prolonged periods.
This will disappear once the door is closed and the Larder allowed to defrost
and drain the moisture away. This is normal for cooling function of the Larder
compartment, especially in summer period.
If room temperature is 16 C or lower, (for example the product is located in a garage
or out building), for the refrigerator to operate correctly the “Fast Freeze switch” must
be in the ‘ON’ position.
Switch
GB
20
Assistance
Before calling for Assistance:
Check if the malfunction can be solved on your own (see Troubleshooting).
If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre
Communicating:
type of malfunction
appliance model (Mod.)
serial number (S/N)
This information can be found on the data plate
located on the bottom left side of the refrigerator
compartment.
Never call on unauthorized technicians and always refuse spare parts which are not originals.
model serial number
1 / 1