5
English
EN
Massage heads and their
functions
Round head is indicated for the
areas: arms, back, buttocks and legs.
Flat head is indicated to relax and
shape all muscles.
Taper head is indicated for deep
tissues such as joints, palm of
the hand or the plantar area.
U-shaped head is indicated for
the neck, spine and Achilles
tendon areas.
-To change the head simply pull the
head and exchange it for the desired
one.
-To turn off the appliance, press and
hold the ON / OFF button.
CLEANING AND STORAGE
-Do not use abrasive detergents or
products that could damage the
appliance. Simply clean the surface
with a wet cloth.
-Do not immerse the appliance in
water or any other liquid.
TECHNICAL DATA
5V 1A (by USB)
7.4V (Ion Lithio)
Capacity 1200 mAh
This product complies
with the directives
2014/35 / EU EMC,
2014/30 / EU LVD,
2011 /65 / EU ROSH
PRODUCT RECYCLING –
ENVIROMENT
Do not throw this product
in the trash at the end of its
useful life. Take it to a
waste collection point,
designated for this purpose (subject
to the 2012/96 / EU DEEE directive).
HOW TO REMOVE THE BATTERIES:
If the product contains any
batteries, they must be removed
before disposing of the product.
Follow the steps: Make sure the
batteries are completely discharged
before proceeding to removal. The
appliance must be disconnected
from the power supply when the
batteries are removed.
-To remove the batteries, once
the life cycle of the device is over,
proceed as follows:
-Open the compartment, previously
removing the fixing screws with a
screwdriver.
-Identify the battery and cut its
cables (Red and Black). In order
to avoid risks of a short circuit with
the possible residual charge of
the battery, first cut the Red cable
and protect its conductive part with
insulating tape, then proceed to cut
the Black cable proceeding in the
same way.
-Safely remove the battery.
Remember that batteries must be
deposited in special authorized.