Ravelli MAGNUS Use and Maintenance Manual

USE AND MAINTENANCE MANUAL

Magnus

SCHEDA PRODOTTO

PRODUCT DATASHEET

FICHE DE PRODUIT

PRODUCTKAART

PRODUKTDATENBLATT

FICHA DEL PRODUTO

EU 2015/1186

Marca / Trademark / Marque / Merk / Marke / Marca Ravelli

Modello / Model / Modèle / Model / Modell / Modelo Magnus

Classe di efficienza energetica / Energy Efficiency class /Classe d’Efficacité Énergétique /

Energie-efficiëntieklasse / Energieeffizienzklasse / Clase de eficiencia energética A+

Potenza termica diretta / Direct thermal power / Puissance thermique directe / Directe

warmteafgifte / Direkte Wärmeleistung / Potencia calorífica directa 14,4 kW

Potenza termica indiretta / Indirect thermal power / Puissance thermique indirecte /

Indirecte warmteafgifte / Indirekte Wärmeleistung / Potencia calorífica indirecta --

Indice di efficienza energetica /Energy Efficiency Index / Indice de eficiencia energética /

Energie-efficiëntie-index / Energieeffizienzindex / Índice de eficiencia energética 126

Efficienza utile (Potenza nominale) / Useful efficiency (Nominal power) / Rendement utile

(puissance nominale) / Nuttig rendement (bij nominale) / Brennstoff-Energieeffizienz

(Nennwärmeleistung) / Eficiencia energética útil (potencia nominal)

89,4 %

Efficienza utile (Potenza ridotta) / Useful efficiency (Reduced power) / Rendement utile

(puissance minimale) / Nuttig rendement (bij minimale) / Brennstoff-Energieeffizienz

(Mindestlast) / Eficiencia energética útil (potencia minima)

93,0 %

Rispettare le avvertenze e le indicazioni di installazione e manutenzione periodica riportate nel manuale di

istruzioni. / Comply with the warnings and instructions concerning installation and routine maintenance provided in

the instruction manual. / Respecter les avertissements et les indications sur l’installation et l’entretien périodique

fournis dans le manuel d’instructions. / Neem de waarschuwingen en instructies voor installatie en periodiek

onderhoud in acht zoals aangegeven in de hoofdstukken van de gebruiksaanwijzing. / Beachten Sie die Warnungen

und Hinweise betreffend die Installation und regelmäßige Wartung in der Bedienungsanleitung. / Respete las

advertencias y las indicaciones de instalación y mantenimiento periódico, detalladas en los capítulos del manual de

instrucciones.

14,4

Magnus

PRODUCT DATASHEET

FICHA DO PRODUTO

ΔΕΛΤΙΟ ΠΡΟΪΟΝΤΟΣ

PRODUKTBLAD

KARTA PRODUKTU

PODATKOVNI LIST IZDELKA

EU 2015/1186

Trademark / Marca / Μάρκα / Mærke / Marka / Blagovna znamka Ravelli

Model / Modelo / Μοντέλο / Model / Model / Model Magnus

Energy Efficiency class / Classe de Eficiência Energética / Κατηγορία ενεργειακής απόδοσης /

Energiklasse / Klasa efektywności energetycznej / Razred energetske učinkovitosti A+

Direct thermal power / Potência calorífica direta / Άμεση θερμική ισχύς / Direkte

varmeydelse / Bezpośrednia moc produktu / Neposredna izhodna toplotna moč 14,4 kW

Indirect thermal power / Potência calorífica indireta / Έμμεση θερμική ισχύς / Indirekte

varmeydelse / Pośrednia moc produktu / Posredna izhodna toplotna moč --

Energy Efficiency Index / Índice de eficiência energética / Δείκτης ενεργειακής απόδοσης /

Indeks energieffektivitet / Wskaźnik efektywności energetycznej / Kazalo energetske

učinkovitosti

126

Useful efficiency (Nominal power) / Eficiência energética útil (potência nominal) / Ωφέλιμη

ενεργειακή απόδοση (ονομαστική ισχύ) / Virkningsgrad (nominel varmeydelse) / Sprawność

użytkowa (nominalnej mocy) / izkoristek energije (nazivni izhodni moči)

89,4 %

Useful efficiency (Reduced power) / Eficiência energética útil (potência mínima) / Ωφέλιμη

ενεργειακή απόδοση (ελάχιστο ισχύ) / Virkningsgrad (mindste varmeydelse) / Sprawność

użytkowa (minimalnym mocy) / izkoristek energije (nazivni izhodni moči)

93,0 %

Comply with the warnings and instructions concerning installation and routine maintenance provided in the

instruction manual. / Respeitar as advertências e as indicações de instalação e manutenção periódica referidas nos

capítulos do manual de instruções. / Τηρείτε τις προειδοποιήσεις και τις οδηγίες εγκατάστασης και περιοδικής

συντήρησης που αναφέρονται στα κεφάλαια του εγχειριδίου των οδηγιών. / Overhold advarslerne og angivelserne

for installation og vedligeholdelse, som angivet i kapitel i brugsvejledningen. / Należy przestrzegać ostrzeżeń i

wskazówek dotyczących instalacji i okresowej konserwacji podanych w rozdziałach w instrukcji obsługi. /

Upoštevajte opozorila in navodila za namestitev in redno vzdrževanje, navedena v poglavjih priročnika z navodili.

Magnus

14,4

DECLARATION OF PERFORMANCE

Declaration of performance according to Regulation (EU) 305/2011

n. : 225CPR13.07

1. Unique identification code of the product type:

M0001JR00, residential space heating appliance fired by wood pellets

EN 14785:2006

2. Type, batch or serial number or any other element allowing identification of the construction product as required under Art. 11(4):

Magnus,

3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer:

Residential space heating appliance fired by wood pellets

4. Name, registered trade name or registered trademark and contact address of the manufacturer as required by Art. 11 (5):

Ravelli

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) Italia

5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):

---

6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V:

System 3, System 4

7. In case of the declaration of performance concerning a construction product covered by a harmonised standard:

The notified laboratory IMQ (NB 0051) performed the determination of the product type on the basis of type testing under system 3 and issued

test report CS20-0058801-01

8. Declared performances:

Harmonized technical specification:

EN 14785:2006

Essential characteristics

Performance

Fire safety

Reaction to fire

A1

Distance to combustible materials

Minimum distances (mm):

rear = 100

sides = 250

front = 1000

ceiling = 650

floor = 0

Risk of burning fuel falling out

Pass

Emission of combustion products

(at 13% of O2)

Nominal heat output

CO 0,002 % - 25 mg/Nm3

NOx 125 mg/Nm3

OGC 2 mg/Nm3

PM 12 mg/Nm3

Reduced heat output

CO 0,051 % - 633 mg/Nm3

OGC 2 mg/Nm

3

Surface temperature

Pass

Electrical safety

Pass

Cleanability

Pass

Maximum operating pressure

--

Flue gas temperature at nominal heat output

165 °C

Mechanical resistance(to carry a chimney/flue)

NPD

Nominal heat output

14,4 kW

Room heating output

14,4 kW

Water heating output

--

Efficiency Ƞ

89,4 % Nominal heat output

Ƞ

93,0 % Reduced heat output

9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance

is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer Claudio Mezzalira, Operations Manager

Place Palazzolo sull'Oglio Date 23/02/2021 Sign _______________

DECLARATION OF PERFORMANCE

Declaration of performance according to Regulation (EU) 305/2011

n. : 225CPR13.07

1. Unique identification code of the product type:

M0001JR00, residential space heating appliance fired by wood pellets

EN 14785:2006

2. Type, batch or serial number or any other element allowing identification of the construction product as required under Art. 11(4):

Magnus,

3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer:

Residential space heating appliance fired by wood pellets

4. Name, registered trade name or registered trademark and contact address of the manufacturer as required by Art. 11 (5):

Ravelli

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) Italia

5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12(2):

---

6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V:

System 3, System 4

7. In case of the declaration of performance concerning a construction product covered by a harmonised standard:

The notified laboratory IMQ (NB 0051) performed the determination of the product type on the basis of type testing under system 3 and issued

test report CS20-0058801-01

8. Declared performances:

Harmonized technical specification:

EN 14785:2006

Essential characteristics

Performance

Fire safety

Reaction to fire

A1

Distance to combustible materials

Minimum distances (mm):

rear = 100

sides = 250

front = 1000

ceiling = 650

floor = 0

Risk of burning fuel falling out

Pass

Emission of combustion products

(at 13% of O2)

Nominal heat output

CO 0,002 % - 25 mg/Nm3

NOx 125 mg/Nm3

OGC 2 mg/Nm3

PM 12 mg/Nm3

Reduced heat output

CO 0,051 % - 633 mg/Nm3

OGC 2 mg/Nm3

Surface temperature

Pass

Electrical safety

Pass

Cleanability

Pass

Maximum operating pressure

--

Flue gas temperature at nominal heat output

165 °C

Mechanical resistance(to carry a chimney/flue)

NPD

Nominal heat output

14,4 kW

Room heating output

14,4 kW

Water heating output

--

Efficiency

Ƞ 89,4 % Nominal heat output

Ƞ 93,0 % Reduced heat output

9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance

is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer Claudio Mezzalira, Operations Manager

Place Palazzolo sull'Oglio Date 23/02/2021 Sign _______________

Dichiarazione di conformità UE

EU Declaration of Conformity

Declaration de Conformite UE

(DoC)

Il costruttore

The manufacturer

Le fabricant

Aico S.p.A.

Via A. Kupfer, 31

25036 Palazzolo s/O (Bs) – Italy

ph: +39 030 74 02 939, e-mail: info@ravelligroup.it

DICHIARA che la dichiarazione viene rilasciata sotto la propria responsabilità e si riferisce al seguente

prodotto:

DECLARES that the DoC is issued under our sole responsibility and belongs to the following product:

DÉCLARE que la declaration est délivré sous notre seule responsanilité et elle se refère au suivant produit:

Tipo di prodotto

Product type

Type de produit

Stufa a pellet

Pellet stove

Poêle à granulés de bois

Marchio

Trademark

Marque

Ravelli

Modello

Model

Modèle

Magnus

L'oggetto della dichiarazione di cui sopra è conforme alla pertinente normativa di armonizzazione

dell'Unione:

The object of the declaration described above is in conformity with the relevant Union harmonisation

legislation:

L'objet de la déclaration décrit ci-dessus est conforme à l'harmonisation de l'Union concernant la

législation la directive:

• 2014/30/EU, EMCD

• 2014/35/EU, LVD

• 2011/65/EU, 2015/863/EU, 2017/2102/EU, RoHS

Sono state applicate le seguenti norme armonizzate e/o specifiche tecniche:

The following harmonised standards and/or technical specifications have been applied:

Les normes et les spécifications techniques harmonisées suivantes ont été appliquées:

EN 55014-1

EN 55014-2

EN 61000-3-2

EN 61000-3-3

EN 60335-1

EN 60335-2-102

EN 62233 EN 50581

Palazzolo Sull'Oglio (BS), ITALY

19/11/2020

Preface

Dear Customer, We would like to thank you for choosing one of our stoves.

We invite you to read this manual carefully, before starting installation and use, so that you are able to benefit from all of its

characteristics better and in full safety. It contains all necessary information for correct installation, start-up, operation, cleaning,

maintenance, etc.

Keep this manual in a suitable location, do not discard it without reading it.

Incorrect installation, maintenance and improper use of the product relieve the Manufacturer of all liability deriving from use of the

stove.

For further information and requirements contact your Ravelli-authorised Technical Assistance Centre.

means, including photocopies, recordings or any other storage system, for other purposes that are not exclusively use by the buy-

er’s staff, without the express written consent of the Manufacturer.

Use and maintenance manual Magnus

Pag.8

Rev.1 16/06/2021

EN

Sommario

Preface........................................................................................................................................................................ 7

IDENTIFICATION .......................................................................................................................10

Stove identication ................................................................................................................................................. 10

Manufacturer identication .................................................................................................................................... 10

Reference standards ............................................................................................................................................... 10

Label ......................................................................................................................................................................... 10

WARRANTY ................................................................................................................................11

Certicate of warranty............................................................................................................................................. 11

Warranty conditions ................................................................................................................................................ 11

Registration of warranty ......................................................................................................................................... 11

Info and problems ................................................................................................................................................... 11

GENERAL INFORMATION .........................................................................................................12

Supply and safe-keeping ....................................................................................................................................... 12

Language ................................................................................................................................................................. 12

Symbols used in the manual ................................................................................................................................. 12

SAFETY MEASURES ........................................................................................................................................ 12

General safety warnings ........................................................................................................................................ 12

Residual risks ......................................................................................................................................................... 13

DESCRIPTION OF THE STOVE ..................................................................................................14

Intended use ........................................................................................................................................................... 14

Reasonably foreseeable incorrect use ................................................................................................................. 14

Obligations and forbidden actions ....................................................................................................................... 15

Characteristics of the fuel ..................................................................................................................................... 16

Non-permitted fuels ................................................................................................................................................. 16

TECHNICAL CHARACTERISTICS ............................................................................................17

Technical diagram Magnus .................................................................................................................................... 18

Main parts ................................................................................................................................................................ 19

Description of operation ......................................................................................................................................... 19

Automatic cleaning system .................................................................................................................................... 20

Recharge the fuel .................................................................................................................................................... 20

User training ............................................................................................................................................................ 20

Safety devices.......................................................................................................................................................... 21

SHIPPING AND INSTALLATION ...............................................................................................22

Safety warnings for transportation and installation ........................................................................................... 22

Set-ups for the smoke evacuation system ........................................................................................................... 23

Installation ............................................................................................................................................................... 24

Removing of the xing brackets ............................................................................................................................ 27

Assembly of the wheels .......................................................................................................................................... 28

Assembly of the bae ............................................................................................................................................ 29

Positioning of the monobloc .................................................................................................................................. 30

Fume extractor......................................................................................................................................................... 30

CONFIGURATIONS .....................................................................................................................31

Ash drawer, cleaner and card................................................................................................................................. 31

Pellet hopper cover ................................................................................................................................................. 34

Door .......................................................................................................................................................................... 35

COATING .....................................................................................................................................37

Minimum (internal) dimensions of the coating ..................................................................................................... 37

Air vents ................................................................................................................................................................... 37

Access door ............................................................................................................................................................. 37

CONNECTIONS ..........................................................................................................................38

Connection with external air intake ....................................................................................................................... 38

Chimney connection .............................................................................................................................................. 38

Electrical connection .............................................................................................................................................. 38

Ducting and ventilation ........................................................................................................................................... 39

Connection of external probe or thermostat ....................................................................................................... 39

Testing and commissioning .................................................................................................................................. 40

Electric scheme Magnus......................................................................................................................................... 40

Use and maintenance manual Magnus

Pag.9

Rev.1 16/06/2021 EN

CONTROLS AND USE .................................................................................................................41

Control panel description ....................................................................................................................................... 41

Handheld touch radio initialization ....................................................................................................................... 41

Description of the handheld set ............................................................................................................................. 42

Description of the display ...................................................................................................................................... 42

Time and date setting ............................................................................................................................................. 43

PROCEDURES FOR USE ...........................................................................................................44

Checks prior to start-up ......................................................................................................................................... 44

Feed screw loading ................................................................................................................................................. 44

Switching the appliance on and o ....................................................................................................................... 44

Failed ignition ......................................................................................................................................................... 45

Setting operating temperature and power: .......................................................................................................... 45

OPERATING PHASES OF THE APPLIANCE .............................................................................. 45

Sequence of ignition phases .......................................................................................................................... 45

Modulation ............................................................................................................................................................... 45

Description of menu functions .............................................................................................................................. 45

Setting ...................................................................................................................................................................... 48

Double ducting ....................................................................................................................................................... 50

Stove phase general layout .................................................................................................................................... 54

INSTALLATION QUICK GUIDE RAVELLI SMART WI-FI ...........................................................58

Connect the WiFi module cable ............................................................................................................................. 58

App ............................................................................................................................................................................ 58

Connection to the WiFi module .............................................................................................................................. 58

Account registration ............................................................................................................................................... 60

MAINTENANCE .................................................................................................................................................. 62

Safety warnings for maintenance .......................................................................................................................... 62

Cleaning .................................................................................................................................................................. 62

Extraordinary maintenance .................................................................................................................................... 63

Failure cases ............................................................................................................................................................ 66

STORAGE AND DISPOSAL ............................................................................................................................. 69

Disposal ................................................................................................................................................................... 69

TROUBLESHOOTING .................................................................................................................69

The stove does not work ........................................................................................................................................ 69

Dicult lighting ....................................................................................................................................................... 69

Smoke leakage......................................................................................................................................................... 69

The glass gets dirty easily ...................................................................................................................................... 69

Downtime (end of season) ..................................................................................................................................... 69

Use and maintenance manual Magnus

Pag.10

Rev.1 16/06/2021

EN

IDENTIFICATION

Stove identication

Type of product PELLET STOVE

Trademark Ravelli

Model Magnus

Manufacturer identication

Manufacturer Aico S.p.A.

Via Consorzio Agrario, 3/D - 25032

Chiari (BS) - Italy

T. + 39 030 7402939

[email protected]

www.ravelligroup.it

Reference standards

The Magnus stoves that this manual refers to are compliant with the regulation:

305/2011 CONSTRUCTION PRODUCT REGULATION

and the following directives

2014/53/EU (RED)

2011/65/EU 2015/863/EU, 2017/2102/EU, (RoHS)

2009/125/EC (Ecodesign)

And the following harmonised standards and/or technical specications have been applied:

EN 14785; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-102; EN 62233; EN 50581; ETSI

EN 300220-1

All local regulations, including those referring to national and European standards, must be respected when installing the appliance.

Remote control: Synthetic Declaration of Conformity (DoC)

The manufacturer Aico S.p.A. declares that the Remote Control, with the Ravelli brand and model PNET00003 (Palm Touch) is in

conformity with the relevant Union harmonisation legislation: 2014/53/EU (RED), and that the following harmonised standards and/

or technical specications have been applied: ETSI EN 301 489-3, ETSI EN 301 489-1, EN 60950-1 A11+A1+A12+AC+A2, EN

62479.

These declarations can be found in full format on the website www.ravelligroup.it.

Label

The following symbols are used on the label:

PIN,nom Heat input power

(max)

PIN,part Heat input power

(min)

Pnom Nominal power Ppart Reduced power

COnom CO at nominal

power

COpart CO at reduced

power

ηnom Efficiency at nominal

power

ηpart Efficiency at reduced

power

pnom Minimum draught at

nominal power

TFlue gas temperature

at nominal

power

230 V -

50 Hz

Alimentation

Distance to combustible materials

dS-L Left side dCCeiling

dS-R Right side dFFront

dRRear dBFloor

n.d.: undeclared data

Usare solo il combustibile raccomandato:

Use only reccomended fuel:

Utilizer seulement les combustibles recomandés:

Use solo el combustible recomandado:

Gebruik alleen de aanbevolen brandstof:

Nur empfohlenes Brennmaterial verwenden:

50 Hz

Pellet di legno

16,1 kW 7,5 kW

14,4 kW 7,0 kW

0,0507 %0,0020 %

93,0 %89,4 %

165 °C

12 Pa 0,12 mbar

650 W

230 V

APPARECCHIO PER IL RISCALDAMENTO DOMESTICO ALIMENTATO A PELLET DI LEGNO

RESIDENTIAL SPACE HEATING APPLIANCE FIRED BY WOOD PELLETS

APPAREIL DE CHAUFFAGE DOMESTIQUE À CONVECTION À GRANULES DE BOIS

APARATO DE CALEFACCION DOMESTICA ALIMENTADO CON PELLETS DE MADERA

HUISHOUDELIJKE RUIMTEVERWARMINGSTOESTELLEN GESTOOKT MET GEPERST HOUT

RAUMHEIZER ZUR VERFEUERUNG VON HOLZPELLETS

Model: MAGNUS

P

IN,nom

P

IN,part

P

nom

P

part

CO

nom(13%O2)

CO

part(13%O2)

η

nom

η

part

p

nom

T

nom

W

Wood pellet

Granulee de bois

Pellet de madera

Houtpellet

Holzpellets

Ø 6 mm

Leggere le istruzioni d’uso

/ Read and follow the operating manual / Lire et suivre le mode d’emploi / Lea

y respete le manual de operacion / Lees en volg de handleiding voor bediening / Bitte lesen und befolgen

Sie die Montage und Nutzungsanweisungen

Distanza minima da materiali infiammabili

Minimum distance from flammable materials

Distance moindre de matériels inflammables

Distancia minima de materiales inflamables

Minimale afstand van brandbare materialen

Mindestabstand zu brennbaren Materialien

250 mm

100 mm

d

S-L

d

S-R

d

R

650 mm

d

C

1000 mm

d

F

0 mm

d

B

D.o.P. n° 225CPR13.07 (Notified Body 0051)

EN 14785:2006

Anno di produzione: 2021

AICO S.p.A. - Via Kupfer, 31 - 25036 Palazzolo - Brescia (Italy)

21

C199R8001

Use and maintenance manual Magnus

Pag.11

Rev.1 16/06/2021 EN

WARRANTY

Certicate of warranty

Ravelli thanks you for the trust granted with the purchase of one of its products and invites the purchaser to:

• read the installation, use and maintenance instructions for the product;

• read the warranty conditions contained below.

Warranty conditions

The warranty for the Customer is acknowledged by the Dealer under the terms of law.

The Dealer acknowledges the warranty only if the product has not been tampered with and only if it has been installed in accordance

with the Manufacturer’s instructions.

The limited warranty covers manufacturing material defects, as long as the product has not broken sue to an incorrect use, negli-

gence, incorrect connection, tampering, installation errors.

The warranty becomes null and void even if only one requirement in this manual is not complied with.

The following are not covered by warranty:

• the combustion chamber refractory stones;

• the door glass;

• the gaskets;

• the paint job;

• the stainless steel or cast iron combustion grille;

• the resistance;

• the Majolica cladding;

• the aesthetic parts;

• any damages caused by unsuitable installation and/or use of the product and/or shortcomings on the part of the customer.

The use of poor quality pellet or any other unauthorised fuel may damage the product’s components, cause its warranty to be voided

and as a result eliminate the connected manufacturer liability.

It is therefore recommended to use good quality pellet that fulfils the requirements listed in the dedicated chapter.

All damages caused by transportation are not recognised, for this reason it is recommended to carefully check goods upon receipt,

immediately warning the reseller of any damage.

Registration of warranty

To activate the warranty, it is necessary to register the product on the Guarantee Portal on the website

www.ravelligroup.it, by entering your data and the purchase receipt.

Info and problems

Dealers authorised by Ravelli use a trained Technical Service Centre network to meet the Customer’s requirements. For any

information or request for assistance, please contact your Dealer or the Technical Service Centre.

Use and maintenance manual Magnus

Pag.12

Rev.1 16/06/2021

EN

GENERAL INFORMATION

Supply and safe-keeping

The manual is supplied in printed format.

Keep this manual safe, with the stove, so that the user can consult it easily.

The manual is an integral part, for safety reasons, therefore:

• it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:

• it must be kept with the stove until demolition (including relocation, sale, rental, lease, etc....).

The Manufacturer will not be held liable for improper use of the stove and/or damage caused by operations that are not set forth in

the technical documentation.

Language

The original manual was written in Italian.

Any translations into additional languages must be carried out based on the original instructions.

The Manufacturer is liable for the information contained in the original instructions; the translations into dierent languages cannot be

fully veried therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical

Documentation Oce.

Symbols used in the manual

symbol denition

📌This symbol is used to identify particularly important information in the manual. This information also concerns the

safety of users involved in using the stove.

This symbol is used to identify important warnings for the safety of the user and/or the stove.

SAFETY MEASURES

General safety warnings

📌Read this instructions manual carefully before stove installation

and use. Failure to observe the instructions set forth herein

can void the warranty and/or cause damage to property and/

or people.

Stove installation, system verification, operation verification

and initial calibration must be carried out exclusively by qualified

and authorised staff.

The stove needs to be connected to a single chimney that

guarantees the draught declared by the Manufacturer and

observes the installation regulations that apply to the installation

site.

The room where the stove is installed must have an air intake.

The stove must not be used as an incinerator or differently

from its purpose

Use and maintenance manual Magnus

Pag.13

Rev.1 16/06/2021 EN

Do not use any fuel other than fire pellet. It is strictly forbidden

to use liquid fuels.

It is prohibited to use the stove with the door or ash drawer

open or the glass broken.

Do not touch the hot surfaces of the stove without suitable

protective equipment, to avoid getting burned. When it is

running, the outer surfaces reach hot temperatures to the

touch.

It is forbidden to make unauthorised changes to the stove.

Before using the stove it is necessary to know the position and

function of the controls.

If the chimney catches fire you must call the fire brigade.

Only use original spare parts. Any tampering and/or

replacements that have not been authorised by Ravelli can

pose a danger to the user’s safety.

In the event of particularly adverse weather conditions, the

safety systems could intervene and switch off the stove. In any

case, doe not disable the safety systems.

Residual risks

The stove was designed so as to guarantee the user’s essential

safety requirements.

Safety was integrated into the stove’s design and construction as

much as possible.

For every residual risk there is a description of the risk and the zone

or part that is applies to (unless the risk applies to the entire stove

overall). Procedure-related information is also provided on how to

avoid the risk and on the correct use of the personal protective

equipment required by and made compulsory by the Manufacturer.

Use and maintenance manual Magnus

Pag.14

Rev.1 16/06/2021

EN

residual

risk

description procedure-related information

Risk of

burns When the stove is running, it may reach high

temperatures to the touch, especially on its external

surfaces. Take care to avoid burns and use the specic

tools if necessary.

Use the supplied glove to open pellet cover for loading

operations.

DESCRIPTION OF THE STOVE

Intended use

The appliance in question is intended for:

operation allowed fuel forbidden setting

Domestic space

heating by

burning:

pellet Any fuel other

than the

permitted ones.

Residential

or

Commercial

The stove is designed and built to work safely if:

• it is installed by qualied sta according to the specic standards;

• it is used within the limits declared in the contract and herein;

• the operating manual procedures are followed;

• routine maintenance is carried out according to the times and

methods set forth;

• extraordinary maintenance is promptly carried out when needed;

• safety devices are not removed and/or bypassed.

📌This stove must be intended for the use it was specifically

designed for.

Reasonably foreseeable incorrect use

Reasonably foreseeable incorrect use is listed below:

• using the stove as an incinerator;

• using the stove with fuel other than pellet;

• using the stove with liquid fuels;

• using the stove with the door open and the ash drawer out.

Any use of the appliance other than intended must be preventively

authorised in writing by the Manufacturer. Without said written

authorisation, the use is considered “improper”. Any contractual

and non-contractual liability of the manufacturer is excluded for

damages to persons, animals or property due to installation and

maintenance adjustment errors and improper use.

Use and maintenance manual Magnus

Pag.15

Rev.1 16/06/2021 EN

Obligations and forbidden actions

Obligations

The user must:

• read this instructions manual before performing any operation

on the stove;

• the appliance must not be used by children under the age of 8 or

by people with reduced physical, sensorial or mental capacities

or without experience or without the necessary knowledge, and

always with supervision;

• do not use the stove improperly, i.e. for uses other than those

described in the “INTENDED USE” paragraph;

• it is strictly forbidden to use liquid fuels;

• keep objects that are not heat and/or ame-resistant at a safe

distance;

• only and exclusively load the stove with pellet with the

characteristics described herein;

• connect the stove to a regulation chimney;

• provide a suitable system for the supply of combustion air (air

intake or intake duct for watertight stoves);

• always perform maintenance with the stove o and cold;

• perform cleaning activities at the frequency stated herein;

• use original parts recommended by the Manufacturer.

Forbidden actions

The user must never:

• remove or change the safety devices without authorisation;

• perform operations or manoeuvres of his/her own initiative that

are not part of his/her job description, meaning that he/she might

jeopardise his/her own safety and that of others;

• use fuels other than pellet and those allowed for lighting;

• use the stove as an incinerator;

• use ammable or explosive substances near the stove during

operation;

• use the stove with the door open and/or with the glass ruined or

broken;

• close the combustion air and smoke outlet openings, whatsoever;

• use the stove to dry laundry;

• replace or change some of the stove parts.

Use and maintenance manual Magnus

Pag.16

Rev.1 16/06/2021

EN

Characteristics of the fuel

Wood pellet is a fuel made of pressed wood sawdust, often recovered from processing scraps of carpentries. The material used

cannot contain any extraneous substance such as, for example, glue, lacquer or synthetic substances.

The sawdust, once it has been dried and cleaned from impurities, is pressed using a die with holes: as a result of high pressure, the

sawdust heats up by activating the natural wood binders; this way the pellet maintains its shape even without adding articial

substances.

Wood pellet density varies based on the type of wood and can exceed that of natural wood by 1.5 - 2 times.

The cylinders have a diameter of 6 mm and a variable length between 10 and 40 mm.

Their density is equal to approximately 650 kg/m3. Due to their low water content (< 10%) they have a high energy content.

The UNI EN ISO 17225-2:2014 standard (that replaces the EN PLUS standard) denes pellet quality by specifying three classes: A1,

A2 and B. Maintain fuels and other ammables at a suitable distance.

Ravelli recommends using wood pellet classied A1 and A2 according to the EN ISO 17225-2:2014 standard, or certied DIN PLUS

(more restrictive than the A1 class) or ONORM M 7135. Pellet may be light or dark coloured, it is normally bagged into bags that show

the name of the producer, the main characteristics and classication according to standards.

📌 Pellets must be transported and stored in a dry area. Upon contact with humidity they swell and become unusable

📌 It is therefore necessary to protect them from humidity, both during transport and during storage.

Non-permitted fuels

We recommend not using the following materials as fuel:

• wood

• treated wood (painted, lacquered, glued wood etc.);

• sawdust or chips

• liquid fuel

• coal or other fossil fuels

• plastic and derivatives

• treated paper and cardboard

• waste

• fuels that release toxic or polluting substances

Using these fuels, on top of being forbidden due to the emission of polluting and harmful substances, causes the stove to deteriorate

more rapidly and debris to accumulate in the stove and in the smoke evacuation system, thereby reducing performance and safety.

📌The gases produced by these fuels are dangerous for the environment and for your health!

📌Using fuel that is not compliant with the above will void the warranty.

Use and maintenance manual Magnus

Pag.17

Rev.1 16/06/2021 EN

TECHNICAL CHARACTERISTICS

U Magnus

Energy efficiency class - - A+

Heating input reduced - nominal kW 7,5 - 16,1

Heating output reduced - nominal kW 7,0 - 14,4

Red. - Nom. Yield % 93,0 - 89,4

Hourly consumption kg/h 1,6 - 3,3

Loading interval h 20 - 42

Max. heating volume* m3345 - 410

CO at 13% of O2% 0,051 - 0,002

mg/m3 633 - 25

OGC at 13% of O2mg/m3 2 - 2

NOX at 13% of O2mg/m3 118 - 125

PM at 13% of O2mg/m3 39 - 12

Smoke temperature °C 88 - 165

Smoke ow g/s 7 - 11,3

Minimum draft Pa - mbar 10 - 0,1

Electrical connection Hz - V 230 - 50

Electrical power consumption max. W 650

Electrical power consumption reduced - nominal W 72 - 121

Stand-by electrical consumption W 2,3

smoke air inlet Ø mm 60

smoke outlet pipe Ø mm 100

Hopper capacity kg 65

Seasonal energy eciency % 77,9

Type of room temperature control with electronic room temperatu-

re control plus week timer

Other control options with distance control option

The data shown here is provided as a guideline and is not binding, and may change based on what type and quality of wood is used.

Ravelli reserves the right to make any changes in order to improve product performance.

* Heatable volume based on the requested power equal to 35 W/m³ and 55 W/m³

Use and maintenance manual Magnus

Pag.18

Rev.1 16/06/2021

EN

Measurements

Unit of

measurement

Magnus

Height mm 1351

Width mm 1035

Depth mm 663

Weight kg 115

Technical diagram Magnus

1000

470

505

1035

880

1354

PORTA REVERSIBILE DX E SX

1035

Ø80 CANALIZZAZIONE

391,5

+

30

0

505

48,55

62

457

668

KIT RUOTE PER MOVIMENTAZIONE

DA SMONTARE PER FISSAGGIO

226

CARICO PELLET

REVERSIBILE DX O SX

USCITA FUMI Ø100

POSIZIONE REGOLABILE A 180°

COMPATTATORE CENERE

REVERSIBILE

767

148,5

160

50 ENTRATA ARIA

316

310

VALVOLA ANTISCOPPIO

E ISPEZIONE

MISURE CON CORNICE PROFONDA

CODICE K0069AZ00

Via Kupfer,31 25036 Palazzolo S/O

- BRESCIA - ITALY

MONOBLOCCO MAGNUS

CODICE DISEGNO / REV

AICO S.p.a.

TOLLERANZE GENERALI SECONDO LA CLASSE UNI EN 22768-mK

GENERAL TOLERANCES AS PER UNI EN 22768-mK

STATO

FORMATO

TUTTE LE QUOTE MANCANTI SONO DA

RICAVARE DAL MODELLO 3D

ALL THE MISSING MEASUREMENTS CAN

BE FOUND IN THE 3D MODEL

SCALA

DISEGNATO

MASSA

CONTROLLATO

DATA

GRUPPO DI APPARTENENZA

TIPOLOGIA

FOGLIO

1:15

A3

M0001JR00

Assieme Assemblato

-

V.Bertanza

Proprietà della Società

AICO S.p.A.

Senza autorizzazione scritta della stessa, il presente

disegno non potrà essere utilizzato per la costruzione dell’oggetto rappresentato né venire

comunicato a terzi o riprodotto. La Società proprietaria tutela i propri diritti a rigore di legge.

All proprietary rights reserved by

AICO S.p.A.

This drawing shall not be reproduced or in any

way utilized for the manufacture of the component of unit herein illustrated and must not be

released to other parties without written consent. Any infringement will be legally pursued.

227.721 Kg

DENOMINAZIONE

1 / 3

Use and maintenance manual Magnus

Pag.19

Rev.1 16/06/2021 EN

Main parts

element element

A Combustion chamber door D Control panel

B Ashes drawer E Combustion chamber

C Pellet cover F Brazier

Description of operation

Ravelli Magnus are appliances for domestic heating powered by wood pellets with automatic loading. They are suitable for use as a

secondary heating system or as a support for the main heating system.

The heat generated by the combustion of the pellets is diffused in the installation room thanks to the ventilation system as well as by

radiation and natural convection. Thanks to the ducts it is possible to heat other rooms.

The stove is controlled by an electronic control unit that manages the start-up, operation and shutdown phases and also includes

many other functions for control, programming and safety.

The user can choose the operating power from 5 levels, or set the temperature to be maintained in the rooms. In this case the stove

will manage the power to ensure maximum comfort. Among the functions of the electronic control unit there is also that of being able

to program the stove’s start-up and shutdown by setting the weekly chronothermostat.

All this can be done comfortably from the sofa using the handheld remote control.

FUNCTION DESCRIPTION

Ventilation Adjustable from 1 to 5

Automatic

Ducting Double ducting

Manual or automatic (RFS)

Fire pot With automatic cleaning system

Chronothermostat Weekly

4 programs

RDS system

Not available

Thermal reset

Automatic

A A

B B

C C

D D

E E

F F

G G

H H

J J

K K

L L

M M

N N

P P

R R

T T

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

DISEG.

VERIF.

APPR.

FABB.

Qual.

SE NON SPECIFICATO:

QUOTE IN MILLIMETRI

FINITURA SUPERFICIE:

TOLLERANZE:

LINEARE:

ANGOLARE:

FINITURA:

INTERRUZIONE

BORDI NETTI

NOME

FIRMA

DATA

MATERIALE:

NON SCALARE DISEGNO

REVISIONE

TITOLO:

N. DISEGNO

SCALA:1:5

FOGLIO 1 DI 1

A0

PESO:

M0001JR00

D

B

A A

B B

C C

D D

E E

F F

G G

H H

J J

K K

L L

M M

N N

P P

R R

T T

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

DISEG.

VERIF.

APPR.

FABB.

Qual.

SE NON SPECIFICATO:

QUOTE IN MILLIMETRI

FINITURA SUPERFICIE:

TOLLERANZE:

LINEARE:

ANGOLARE:

FINITURA:

INTERRUZIONE

BORDI NETTI

NOME

FIRMA

DATA

MATERIALE:

NON SCALARE DISEGNO

REVISIONE

TITOLO:

N. DISEGNO

SCALA:1:5

FOGLIO 1 DI 1

A0

PESO:

M0001JR00

E

F

A

C

Use and maintenance manual Magnus

Pag.20

Rev.1 16/06/2021

EN

Automatic cleaning system

The stove is equipped with atuomatic brazier cleaning system. This means that there is no need to carry out daily manual cleaning

of the brazier or every time the stove is lit. The automatic cleaning system is activated every time the stove is lit and after 6 hours of

continuous operation. The cleaning cycle, which involves shutting down, automatic cleaning and restarting the stove, takes about

10 minutes. During this period the heating is guaranteed by the heat accumulated by the appliance itself.

Note: the times indicated are those set by default by the Manufacturer.

Recharge the fuel

Use only wood pellets, the characteristics shown in this manual.

During pellet loading prevent the pellet bag from coming into contact with hot surfaces.

📌It is not recommended to empty the pellet bag directly into the hopper to avoid depositing wood sawdust on the bottom of

the hopper.

To load the pellets inside the hopper, proceed as described below:

step

1 Open the pellet hopper cover

2 Pour the pellets into the hopper

3 Close the pellet hopper cover

When the pellet is running out, the signal appears on the display thanks to the sensor with which the fireplace is equipped.

User training

Once installation is complete, the user must always be fully trained in the functions and characteristics of the stove by the technician

authorized by Ravelli to ensure optimal and safe use.

The training should cover the following topics:

• Description of the stove, its operation and basic settings

• How to turn the stove on and off safely

• Fuel storage and refilling

• What to do in the event of an alarm, in particular that of “no ignition”

• How to clean the stove correctly and the importance of performing it on a regular basis

• It is advisable to schedule the first annual maintenance

La pagina sta caricando ...

Ravelli MAGNUS Use and Maintenance Manual

Ravelli MAGNUS Use and Maintenance Manual

in altre lingue

Documenti correlati