Bartscher 109558 Istruzioni per l'uso

Marca: Bartscher

Modello: 109558

Categoria: Lavastoviglie

Tipo: Istruzioni per l'uso

COD.: 3050EC

Ed. 03 - 03/2018

APPLICARE ETICHETTA

MATRICOLA

Instructions for Installation, Use and

Maintenance

109558

Thank you for choosing our machine.

The instructions for installation, maintenance and use found on the following pages have

been prepared to ensure a long life and perfect operation of your unit.

Please, do follow the instructions carefully.

We have designed and built this machine using the latest innovative technologies. Now

you shall take good care of it.

Your full satisfaction is our greatest reward.

WARNING: FAILURE TO COMPLY, EVEN PARTIALLY, WITH THE PRESCRIPTIONS IN THIS MANUAL

WILL RENDER THE PRODUCT WARRANTY NULL, AND THE MANUFACTURER SHALL NOT BE LIABLE.

READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING THE MACHINE.

page 19

SUMMARY Page

WARNINGS 20

INSTALLER SECTION

1. MACHINE INSTALLATION 22

1.1 Dataplate 22

1.2 Receiving the product 23

1.3 Water connection 23

1.3.1 Water supply characteristics 23

1.4 Electrical connection 24

1.5 Rinse-aid dosing pump functioning 24

1.6 Machine features 24

2. DETERGENT DISPENSER RETROFIT 25

2.1 Detergent dispenser installation 25

3. TECHNICAL DATA AND USEFUL INFORMATION ON PUMPS 25

3.1 Washing pump 25

3.2 Emptying pump (optional) 25

3.3 Standard version keys 25

USER SECTION

4. CONTROL PANEL AND RELATIVE SYMBOLS 27

4.1 Standard version keys 27

4.2 Dataplate 27

5. OPERATION 28

5.1 Cutlery and crockery loading 28

5.2 Detergent use 29

5.3 Rinse aid use 29

5.4 Compliance with H.A.C.C.P. and hygiene standards 29

5.5 Drain pump (optional) 29

5.6 Machine features 29

6. MAINTENANCE 29

6.1 Routine maintenance 29

6.2 Extraordinary maintenance 30

7. ALARMS 30

8. THE ENVIRONMENT 30

8.1 Packing 30

8.2 Disposal 30

9. ECOLOGICAL ASPECTS 31

9.1 Recommendations for optimal use of energy, water and additives 31

10. TROUBLESHOOTING 31

11. EU DECLARATION 33

TRANSLATION OF THE ORIGINAL INSTRUCTION

page 20

WARNINGS

This instructions manual shall be kept with the machine for future

consultation. Should this machine be sold or transferred to other

users, make sure the booklet always goes with it, so that the new owner

can have all necessary information on operations and all relevant

instructions.

The instructions manual must be read carefully before installation and before

starting the machine.

• The connection to the electrical and water networks, for installing this unit, must

be carried out by qualiﬁ ed operators only.

• This machine must only be used by adults. This is a professional machine to be used by

qualiﬁ ed personnel, installed and repaired exclusively by qualiﬁ ed Technical Personnel.

The Manufacturer declines any responsibility for improper installation, use, maintenance

or repair.

• This appliance can be used by trained youth aged from 15 years and above. It cannot

be used by persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Do not slam the door when opening and closing.

• Make sure the dishwasher is not resting on the power cord or the ﬁ lling and drain hoses.

Level the machine by adjusting the support feet.

• Do not use the appliance or any part of it as a stepladder or means of support as it has

been designed exclusively to bear the weight of the dishrack containing dishes to be

washed.

• This machine is designed exclusively for washing dishes, glasses and various

pots and pans with human food type of residue. DO NOT wash articles polluted

with petrol, paint, chips of steel or iron, fragile objects or material not resistant to

the washing process. Do not use acidic corrosive chemical products or alkaline

and solvents or chlorine based detergents.

• Do not open the machine door when operating. In any case, the machine has a special

safety device which immediately stops it if the door is accidentally opened, thus preventing

water spillage. Remember to always switch the machine oﬀ and empty the tank before

accessing the inside for cleaning or any other purpose.

• This machine must be disconnected from the main electrical supply after use at the

end of the day and for any service/maintenance operation following this procedure:

Switch the machine oﬀ from the control panel.

Drain the tank by removing the overﬂ ow pipe.

Disconnect the electrical supply by the omni-polar switch (main switch located on

the wall).

page 21

Shut the water supply valve(s).

Disregarding the aforesaid prescriptions is a serious misuse and can cause

damages and injures to property and people, and will relieve the manufacturer

from whatever liability.

• The user shall not carry out any repair and/or maintenance operations. In any case

contact qualiﬁ ed personnel.

• Servicing of this machine must be performed by authorized personnel only.

N.B.: Use genuine spare parts only. Non-genuine parts will void the warranty and

the manufacturer will take no responsibility for any damage.

• Do not use old load pipe, but only new ones.

• Some important rules must be followed for using this appliance:

1) Never touch the appliance with wet hands or feet

2) Never use the appliance when barefooted

3) Do not install the appliance in places exposed to water splashes.

• Do not dip bare hands into water containing detergent. If this should occur, wash them

immediately with plenty of water.

• Follow the instructions given in the manufacturer’s booklet for cleaning operations (chap.

6).

• This appliance is designed to work at room temperatures up to a max. 35°C, in a suitable

place with temperature not below 5°C.

• Do not use water to extinguish ﬁ res on electrical parts.

• Do not cover the intake or dissipation grids.

• Only qualiﬁ ed personnel can access the control panel, when the main power switch is

OFF.

• The machine has an IPX3 protection rating against accidental water splashes and is not

protected against pressurized water jets. Pressure-cleaning systems shall, therefore, not

be used on this machine.

NOTE: The manufacturer declines any responsibility for accidents to people or any

damage deriving from failure to observe the above listed instructions.

CAUTION: WAIT 10 MINUTES AFTER THE APPLIANCE HAS BEEN

TURNED OFF BEFORE CLEANING THE INSIDE.

CAUTION: DO NOT PUT HANDS IN THE APPLIANCE AND/OR TOUCH

THE PARTS ON THE BOTTOM OF THE TUB DURING AND/OR AT THE

END OF A WASHING CYCLE.

page 22

1. MACHINE INSTALLATION

1.1 Dataplate

Model S/N

%QFG

50 6[RG&9.:::::

ZZ°%

ZZZkcal

ÄM2C

IPXX

/#&'+0+6#.; ;;;;

/QFGN &9::::;;;;

ZZZZ9

80*< ZZ#

RoHS

/#:



&'5%4+26+10

S/N DW X xxxxxxx

ANNO

YEAR

ANNÉE

AÑO

JAHR

NUMERO DI SERIE

SERIAL NUMBER

NUMÉRO DI SÉRIE

NUMERO DI SERIE

SERIENNUMMER

E=2010 - 2011

F=2011 - 2012

G=2013 - 2014

H=xxxx - xxxx

Model DW XXXX

FAMIGLIA PRODOTTO

FAMILY PRODUCT

FAMILLE DU PRODUIT

FAMILIA PRODUCTO

FAMILIE DES PRODUKTES

Model DW XXXX.YYYY

FAMIGLIA PRODOTTO

FAMILY PRODUCT

FAMILLE DU PRODUIT

FAMILIA PRODUCTO

FAMILIE DES PRODUKTES

CODICE MODELLO

CODE MODEL

CODE ARTICLE

CODIGO MODELO

KODE VON MODELL

Model S/N

%QFG

50 6[RG&9.:::::

ZZ°%

ZZZkcal

ÄM2C

IPXX

/#&'+0+6#.; ;;;;

/QFGN &9::::;;;;

ZZZZ9

80*< ZZ#

RoHS

/#:



&'5%4+26+10

A Power source

B Total power installed

C Dynamic pressure

D Envelope protection degree

E Total electricity absorption

ATTENTION:

At the end of installation make sure to remove the parts of this booklet relevant to the installer, for future

consultation.

page 23

INSTALLER SECTION

1.2 Receiving the product

After unpacking, make sure the appliance has not been damaged due to transport. Otherwise, report the

anomaly to the dealer. If it aﬀ ects safety, do not install the appliance.

Double check the ﬁ rm tightness of all hose-clamps on piping, nuts and bolts, and fasteners, that might

come loose with the transport, to prevent water dripping or leakages, or other damages, during the

machine's operation.

For disposal of the packing, see chap. 8.

1.3 Water connection

Connect the machine's water supply with an interrupt valve capable of quickly and completely shutting oﬀ

water intake.

Make sure the water supply pressure is within the values given in table 1.

If is below 2 bar dynamic pressure (200 kPa), for optimal machine operation it is advisable to

install an external pressure increase pump. If the supply pressure is higher than 4 bar (400

KPa), installation of a pressure reducer is recommended.

A water softener must be installed for waters with average hardness above 8°f.

This will ensure cleaner dishes and longer machine life.

Every machine is supplied with a rubber hose for water ﬁ lling with 3/4"F threaded connection.

It is advisable to connect the hose to a water supply not above 60°C, if connected to the

hot water.

Connect the drain hose, supplied with the machine, to the elbow union located under the

tank in such a way that water ﬂ ows freely (therefore ensuring a minimum slope).

If the water cannot be discharged to a level below the machine drain (see pict. 1), it is

advisable to purchase a machine with built-in drain pump.

The drain hose must always be connected to a trap to prevent the return of odours from the

system.

1.3.1 Water supply characteristics

The machine water supply must be potable, in compliance with Directive 98/83/EC.

The inlet water must also meet the parameters given in the table 2.

1 Out of range values might lead to corrosion and jeopardize the life of the machine.

2 Should the water hardness is higher

it is compulsory to install a water softner and check periodically its operation.

3 Out of range values might lead scaling and sediments with a consequent lower performance, functionality, and expected

life of the machine.

4 Desired value: Out of range values might lead stainless steel blackening/tarnishing.

It is recommended a water test once a year.

MAX

500 mm

pict. 1

Water characteristics table Min Max

Static Pressure 200Kpa 400Kpa

Dynamic Pressure 150Kpa 350Kpa

Water Hardness 2°f 8°f

Hot water-supply temperature 50°C 60°C

Capacity 10lt/min

table 1

Water parameters table Min Max

Chlorine

2mg/l

pH 6,5

8,5

Water hardness 8°f

2-3

Iron

0,2 mg/l

Manganese

0,05 mg/l

table 2

page 24

INSTALLER SECTION

1.4 Electrical connection

Electrical connection must be carried out in compliance with current standards.

Make sure the line voltage matches that given on the special machine dataplate.

A suitable omni-polar one-way switch shall be installed and sized according to the absorption provided, in

order to completely guarantee the disconnection from the supply mains, under “category III” overvoltage conditions.

This switch shall be included in the power network solely and exclusively used for this purpose and installed in

the immediate vicinity of the machine. Always turn the machine oﬀ via this switch. This is the only model of switch

that guarantees a total electrical power disconnection.

Make sure that the facility is equipped with eﬃ cient ground connection.

The machine has a connection at the back, indicated by the symbol that is meant to link the steel structure and

masses among diﬀ erent apparatuses (see electrical safety standards).

The special dataplate gives the nominal power and electrical input values in watts (W) and amperes (A), for dimensioning

of the line, cable and switches.

Warning: some versions of this machine can dissipate more than 10mA to earth.

1.5 Rinse-aid dosing pump functioning

Functioning: The dosing pump is powered by the pressure generated by the rinse pump,

used to load a spring.

The release of the spring generates the suction of the rinse-aid chemical from its container

to the boiler.

To prime the rinse-aid pump, run some wash/rinse cycles.

Water connection:

1) Connect the dispenser by its hose holder ﬁ tting A to the pump, by means of the rubber

hose installed in the machine (pump pressure).

2) Connect the black rubber tube by its delivery connection B to the union located near the

boiler (injector).

3) Ensure insertion of the green product suction tube in the special connection C and the ﬁ lter and ballast in the rinse aid tank.

Adjustment: The dosing pump takes a determined quantity of rinse-aid chemical at each rinse.

This quantity is adjustable from 0 to 4 cc, equivalent to circa 0 to 30 cm length of the suction hose.

Turn the adjustment screw clockwise to reduce capacity.

Turn the adjustment screw anticlockwise, to achieve the maximum capacity (up to 20 turns).

For the right amount of product see the paragraph Rinse aid use.

Note: for every turn of the screw the amount of rinse aid drawn in the tube varies by 1.6 cm, equal to 0.2 cm³/turn (approx.

0.21g/turn with rinse aid density of 1.05 g/cm³).

The rinse aid dispenser cannot work correctly if the diﬀ erence in level between the bottom of the machine and the tank is

more than 80 cm.

THE DISPENSERS ARE PRESET FOR DRAWING 5 cm, FOLLOWING A FUNCTIONAL CHECK DURING THE TESTING

PHASE. THIS VALUE MUST ALWAYS BE MODIFIED ACCORDING TO THE TYPE OF RINSE AID AND THE HARDNESS

OF THE WATER.

1.6 Machine features

The machine’s sound level is Lpa = 70dBA ± 2.5dB(A)**

**test made according to EN 60335-2-58/A11

code 10799

pict. 2

WARNING: check very carefully if the “ground connection” of the machine, is properly sized and fully eﬃ cient,

and that not too many units are connected on it. An undersized or poor “ground connection” might lead to

corrosion and/or pitting eﬀ ect on the stainless steel plates, even to perforation.

Note: for machines with 400Vac3N type cables must be used, or replace them with others if diﬀ erent from the

standards in the country where the dishwasher is installed. The dealer/importer/installer must adapt the power

cable insulation class according to the work environment, in conformity with current Technical Standards.

page 25

INSTALLER SECTION

2. DETERGENT DISPENSER RETROFIT

2.1 Detergent dispenser installation

Electrical connection: See the wiring diagram attached to the machine.

Water connection:

a) In the dishwasher, the hole for inserting the injector is already available and

closed with a plastic plug. Just remove the plug from the hole and ﬁ t the delivery

connection (located at the front, below the control panel).

b) Correctly install the injector C, using the appropriate seals.

c) Connect the suction tube to the dispenser suction connection (see pict. 4 point A).

d) Connect the delivery tube to the other connection of the dispenser and the delivery

union (see pict. 4 point B).

e) Insert the tube with ﬁ lter in the detergent tank.

f) Prime the detergent and proceed with the dosage phase.

Dosage: The detergent dispenser delivery can be adjusted

by directly operating with a screwdriver as shown in pict. 3.

Every 2 cm of product drawn corresponds to 0.25 cm³, equal

to 0.3 g (with density 1.2 g/cm³). Also see par. 5.2.

IMPORTANT: DO NOT INVERT THE TUBES IN THE

PRODUCTS; IF THIS OCCURS IT WOULD RUIN THE

METERING PUMPS AND COMPROMISE DISHWASHER

OPERATION.

pict. 3

15185

Ø 10

pict. 5

Main switch 0-1 Washing cycle

indicator

Temperature

indicator

Drain button

(optional)

CONNECTION DIAGRAM

pict. 4

3. TECHNICAL DATA AND USEFUL INFORMATION ON PUMPS

3.1 Washing pump

When the dishwasher has not been used for some time, check that the washing pump turns freely.

To do this, operate using a screwdriver in the special slot on the ventilating side of the motor shaft.

In case of blocking, turn the main switch oﬀ and move the motor shaft, inserting the screwdriver in the notch, turning it

clockwise and anticlockwise.

3.2 Emptying pump (optional)

How installing, pay particular attention to the position of the emptying tube (see pict. 5).

See paragraph 5.5 for operations description.

3.3 Standard version keys

page 26

page 27

USER SECTION

4. CONTROL PANEL AND RELATIVE SYMBOLS

4.1 Standard version keys

4.2 Dataplate

Main switch 0-1 Washing cycle

indicator

Temperature

indicator

Temperature

indicator

Model S/N

%QFG

50 6[RG&9.:::::

ZZ°%

ZZZkcal

ÄM2C

IPXX

/#&'+0+6#.; ;;;;

/QFGN &9::::;;;;

ZZZZ9

80*< ZZ#

RoHS

/#:



&'5%4+26+10

S/N DW X xxxxxxx

ANNO

YEAR

ANNÉE

AÑO

JAHR

NUMERO DI SERIE

SERIAL NUMBER

NUMÉRO DI SÉRIE

NUMERO DI SERIE

SERIENNUMMER

E=2010 - 2011

F=2011 - 2012

G=2013 - 2014

H=xxxx - xxxx

Model DW XXXX

FAMIGLIA PRODOTTO

FAMILY PRODUCT

FAMILLE DU PRODUIT

FAMILIA PRODUCTO

FAMILIE DES PRODUKTES

Model DW XXXX.YYYY

FAMIGLIA PRODOTTO

FAMILY PRODUCT

FAMILLE DU PRODUIT

FAMILIA PRODUCTO

FAMILIE DES PRODUKTES

CODICE MODELLO

CODE MODEL

CODE ARTICLE

CODIGO MODELO

KODE VON MODELL

Model S/N

%QFG

50 6[RG&9.:::::

ZZ°%

ZZZkcal

ÄM2C

IPXX

/#&'+0+6#.; ;;;;

/QFGN &9::::;;;;

ZZZZ9

80*< ZZ#

RoHS

/#:



&'5%4+26+10

A Power source

B Total power installed

C Dynamic pressure

D Envelope protection degree

E Total electricity absorption

page 28

USER SECTION

5. OPERATION

• Insert the overﬂ ow pipe in the special seat inside the tank.

Make sure all the ﬁ lters are properly ﬁ tted in their seats. The ﬁ lters must be cleaned every 40-50 wash cycles

and whenever necessary.

Do not operate the machine without ﬁ lters, and in particular the pump suction ﬁ lters.

• Open the water valve.

• Turn on the main wall switch and start the machine by pressing switch 1 (it is not a total disconnecting switch - see par.

4.1).

• Insert the special green rinse aid dispenser tube in the liquid rinse aid container and check that the quantity is suﬃ cient

for the daily requirement.

• Close the hood: the tank ﬁ lling phase starts automatically.

• After the tank ﬁ lling, the machine automatically starts the heating phase.

• The machine will be ready for washing only when the indicator 3 will light on.

• Before beginning the wash cycle, insert the proper detergent into the tank (if the machine is not equipped with an automatic

dispenser).

N.B.: in order to guarantee the exact rinse temperature, the washing time can increase to allow the boiler water temperature

to reach the set temperature (80°-85°C).

• Insert the basket with dishes or various articles to be washed and close the hood. The wash cycle starts automatically,

immediately followed by the rinse cycle. The cycle is signalled by the indicator 2.

• The cycle is ﬁ nished when the indicator goes oﬀ .

• The appliance is ready for another cycle.

Note: It is advisable to change the tank water, by means of another ﬁ lling, at least every 40-50 washes or twice a day.

Clean the machine at the end of the day (see chap. 6 Maintenance).

Switch the machine oﬀ and close the water valve.

5.1 Cutlery and crockery loading

Before cutlery and crockery loading in the machine, coarsely clean them from the leftover food.

It isn't necessary to rinse the cutlery an crockery under water.

Note the following recommendations :

• Crockery and cutlery should not be inserted inside one another, covering each other.

• Place the crockery in order to all surfaces can be reached by water; otherwise the dishes are not

washed.

• Make sure all the crockery are in a stable position and that the hollow containers don't overturn

(cups, glasses, bowls, etc.) .

• Place in the rack all the hollow containers such as cups, glass, etc. upside-down.

• Place the crockery with deep hollow with upper face downwards, so that water can ﬂ ow out.

• Make sure the smaller crockery do not fall from the rack.

• Check all the wash arms runs freely and they are not blocked by too tall or too prominent crockery.

Eventually, run a manual rotation of the arms to check it.

Some foods, such as carrots, tomatoes, and others, may contain some natural dyes substances, that

in large amounts, can alter the crockery and plastic parts colors.

Any discoloration does not mean that the plastic is not heat resistant.

Crockery and cutlery not suitable for dishwasher

Not suitable for dishwasher:

• Wooden crockery and cutlery or with wooden parts; water at high temperature causes deformation

to wood. Also the adhesives used are not suitable for treatment in the dishwasher; a consequence

could be the handles detachment.

• Crafts, precious vases or decorated glasses.

• Not heat-resistant plastic crockery.

• Copper, brass, pewter or aluminum objects: they may become discolored or opaque.

pict. 6

pict. 7

ATTENTION: Do not wash articles polluted with petrol, paint, chips of steel or iron,

ash, sand, wax, lubricant grease. These substances damage the machine. Do not

wash fragile objects or material not resistant to the washing process.

page 29

USER SECTION

• The decorations on glass, after a certain number of washes, can lose gloss.

• Fragile glasses or crystal items, if often washed, can become opaque.

We recommend to buy exclusively crockery and cutlery suitable for dishwashing.

After several washes, the glass can become opaque.

It is mandatory to repeat the washing cycle if at the end of the cycle the crockery are not well clean or if there are

washing residues (glasses, cups, bowls, etc. with liquid inside).

5.2 Detergent use

Il The detergent shall be the NO FOAM type, suitable for industrial dishwashers.

The use of good quality liquid detergents is recommended.

Put the detergent directly in the tub.

Follow the manufacturer’s recommendations for chemical dosage, related to the local water hardness.

1cm. of the product drawn into the tube is equal to about 0.15 g. A correct amount of detergent is very important

for a successful wash.

5.3 Rinse aid use

The machine has a standard rinse aid dispenser.

The machine automatically sucks the rinse-aid chemical.

The rinse-aid chemical, shall be suitable for professional glass and dishwashers. It is advisable to rely on

specialized retailers in the sector.

5.4 Compliance with H.A.C.C.P. and hygiene standards

• The machines are equipped with a temperature gauge that indicates the set temperature is reached.

• Remove carefully all solids from the objects to be washed, to avoid obstruction of ﬁ lters, nozzles and piping.

• Drain the wash tank and clean the ﬁ lters at least twice a day.

• Check if the detergent and rinse-aid dosage are correct (as recommended by the manufacturer). In the morning, before

starting the machine, check that the quantity of chemicals in the canisters is enough for daily supply.

• Keep your working tables clean.

• Extract the rack with clean hands or gloves to avoid ﬁ nger marks.

• Do not dry or polish the washed objects with cloths, brushes or rags that are not sterile.

5.5 Drain pump (optional)

To empty the tank: remove the overﬂ ow and leave the hood open, then press the key 4 to start the

automatic total emptying time.

After emptying, the machine goes on standby.

At the end of emptying, turn oﬀ the switch 1 and the main wall switch.

If emptying does not occur in the set time, the cycle indicator

2 ﬂ ashes, indicating that emptying did not

occur (check the pump ﬁ lters and insertion of the overﬂ ow).

For another load, switch the machine oﬀ , insert the overﬂ ow and switch the machine on again.

During the wash-rinse cycle the excess water is automatically discharged.

5.6 Machine features

The machine’s sound level is Lpa = 70dBA ± 2.5dB(A)**

**test made according to EN 60335-2-58/A11

6. MAINTENANCE

ATTENTION: The machine is not protected against pressure water jets, therefore do not use such

cleaning systems on the cabinet.

It is also advisable to contact cleaning product dealers for detailed information on methods and products

for periodical sanitizing of the machine.

Do not use bleach or chlorine-based detergents to clean the dishwasher.

6.1 Routine maintenance

Perfect machine operation depends on careful cleaning, which must be carried out at least once a day, in the following way:

• Turn oﬀ the switch (0-1) and the main wall switch.

• Drain the water, removing the overﬂ ow pipe.

Note: for machines arranged with drain pump, after removing the overﬂ ow pipe and turning oﬀ the switch (0-1), press

the button (4) until draining is completed.

• Remove the ﬁ lters and clean them with a brush and a water shower.

pict. 8

DETERGENT

RINSE AID

page 30

USER SECTION

8. THE ENVIRONMENT

8.1 Packing

The packing consists of the following:

• a wooden pallet

• a nylon (LDPE) bag

• a multilayer cardboard box

• polystyrene foam (PS)

• polypropylene (PP) straps.

Please dispose of the materials listed above, according to the current regulations.

8.2 Disposal

The use of the WEEE Symbol indicates that this product may not be treated as householdwaste. By ensuring

this product is disposed of correctly, you will help protect the environment. For more detailed information about

the recycling of this product, please contact your local authority, your household waste disposal service provider

or the shop where you purchased the product.

For the disposal of the machine or one part of its, please follow the directives 2011/65/UE, 2012/19/UE and

following changes and/or the legislative decrees of application.

This product or parts of it cannot be disposed of as domestic waste but must be treated by means of separate collection

(see barred waste container symbol on product).

At the time of product disposal, the user must refer to the speciﬁ c waste collection systems for electric and electronic

appliances (WEEE).

The manufacturer guarantees the absence of dangerous substances in the EEE’s used in compliance with the 2011/65/UE

Directive.

In the case of failure to comply with that prescribed, the user will be subject to the sanctions envisioned by the individual

European Community member.

Disconnect the machine from the electrical and water supply before disposal.

Cut oﬀ the electrical cable in order to make any other use impossible.

All the metal parts are recyclable as they are in stainless steel.

Recyclable plastic parts are marked with the symbol of the plastic material.

• Remove the wash and rinse arms by loosening the ﬁ xing screws, and thoroughly clean them, and the nozzles under

running water.

• Reassemble the parts and reposition the wash pipes ﬁ rmly in place.Take extreme care to re-assemble the nozzles in the

right position (open and / or closed nozzles) and that the arms are installed with the right axial angle.

• Carefully clean the tank; do not use chlorine-based detergents.

• It is recommended to leave the machine hood open at the end of the day.

Do not use a metal scouring pad and/or corrosive detergents for cleaning the machine.

6.2 Extraordinary maintenance

Once or twice a year have the machine inspected by a qualiﬁ ed technician, in order to:

• Clean the solenoid valve ﬁ lter

• Remove scale from the heating elements

• Check the tightness of seals

• Check the integrity and/or wear of components

• Check the functionality of the dispensers

• Tighten ﬁ rmly all electrical connections at least once per year by qualiﬁ ed Service Personnel.

7. ALARMS

TYPE OF ALARMS CAUSES CURES

Cycle indicator ﬂ ashing The wash tank does not fill

with water

Check that the water supply valve is open or correct positioning

of the overﬂ ow. Switch the machine oﬀ and on again to cancel

the alarm.

In machines with thermostop:

the boiler does not heat

Faulty thermostat boiler or heating element: check and if

necessary have them replaced by Technical Assistance

page 31

USER SECTION

9. ECOLOGICAL ASPECTS

9.1 Recommendations for optimal use of energy, water and additives

Use the machine fully loaded when possible: This shall prevent detergent, rinse aid, water and energy

consumption waste.

Detergent and rinse-aids: Use detergents and rinse-aid chemicals with high biodegradability, to best respect the

environment. Verify proper dosage in relation to water hardness at least once a year. Excess product pollutes rivers

and seas while an insuﬃ cient dose results in unsatisfactory dish washing and/or hygiene.

Boiler and Wash-Tank temperatures: The boiler and tank temperatures are set by the manufacturer in order to obtain the best

washing results with detergents on the market. The temperatures can be reset by the installer in relation to your detergent.

Pre-washing: Carefully pre-wash with a moderate amount of water at room temperature to facilitate the removal of animal

fats. To remove encrusted materials warm water soaking is recommended.

Note: Wash objects as soon as possible to avoid deposits from drying and compromise eﬀ ective washing.

For eﬀ ective washing routine dishwasher cleaning and maintenance is advised (see chap. 6).

Disregarding the points listed above and of any the information contained in this manual can cause energy, water

and detergent waste with a subsequent increase in running costs and/or performance reduction.

Type of problem Possible causes Cure

The machine does not

start

Main switch turned oﬀ Turn switch on

The machine does not

load water

Water supply valveclosed Open the water valve

Spraying arm nozzles clogged Clean the spraying arm nozzles and the pipes

Solenoid valve ﬁ lter clogged with sand Clean the ﬁ lter

Inadequate washing

results

The washing nozzles are clogged or the

washing arms do not rotate

Unscrew and clean the nozzles and the rotation shaft

and correctly reﬁ t everything in the special seats

Detergent concentration too low Change the amounts of detergent

Filters too dirty Remove and clean the ﬁ lters with a brush under a jet

of water then reﬁ t them in their seats

Presence of foam Use a non-foaming detergent or reduce the amounts

of that used. Check the amounts of rinse aid

Check the tank temperature (it must be

between 50°C and 60°C)

Adjust the thermostat or check correct operation of

the heating element

During wash, insuﬃ cient for the type of

dirt

Select the longest cycle when possible, otherwise

repeat the wash cycle

Washing water too dirty Drain the tank water, clean the ﬁ lters; reﬁ ll the tank

and correctly reﬁ t the ﬁ lters

Pots and dishes are not

properly dried

Insuﬃ cient rinse aid dosage Increase the amount by adjusting the dispenser screw

(see par. Rinse aid dispenser)

Basket unsuitable for the pots and dishes Use a suitable basket that allows the pots to be tilted

so that the water runs oﬀ

Dishes may have been inside the machine

for too long

As soon as the wash cycle is over immediately remove

the basket with pots and dishes so that they can dry

quicker with air

Rinse water temperature below 80°C Check the boiler thermostat temperature. If necessary

have it adjusted by Technical Assistance

10. TROUBLESHOOTING

page 32

USER SECTION

Note: For any other problems, contact Technical Service.

The Manufacturer reserves the right to modify the technical characteristics without prior notice

Type of problem Possible causes Cure

Streaks or smears on pots

and dishes

Rinse aid concentration too high Reduce the rinse aid concentration by means of the

dispenser micrometrical screw (see par. Rinse aid

dispenser)

Water too hard Check the quality of the water. The water hardness

must not be more than 8°f

During operation the

machine suddenly stops

The machine is connected to an overload

system

Connect the machine separately (call the authorized

personnel).

A machine safety device has triggered Check the safety devices (call the authorized

personnel)

During the wash phase

the machine stops and

replenishes water

The previous day's water was not changed Empty the tank and carry out a new ﬁ lling

Temperature of water in tank too high Have the thermostat and pressure switch checked by

the Assistance Centre

Faulty pressure switch

Overﬂ ow incorrectly positioned Remove and correctly position the overﬂ ow

The washing pump doesn't

work

The pump is blocked Call the Technical Assistance service

page 33

USER SECTION

11. EU DECLARATION

The machine purchased is in compliance with the norms stated in the EU declaration attached to the machine in original.

Please ﬁ nd attached below the facsimile of this declaration, with the general data of the machine purchased. For the absorption

data refer to the data-plate on the machine.

1) Preposto/Person in Charge

Firmato in originale e conservato presso la nostra sede (2).

Original document signed and available at our oﬃ ce (2).

Dieses Dokument ist im Original unterzeichnet und bei uns aufbewahrt (2).

Signé en original et gardé à notre siège (2).

Firmado en original y conservado en nuestro domicilio (2).

Original assinado e armazenado na nossa sede (2).

2) 3)

4) EN 60335-1:2012; EN 60335-2-58:2005; EN 55011:2009;

EN55014:2006; EN 61000 3-2:2006; EN 61000 3-3:2008;

EN61000 3-11:2000; EN 61000 3-12:2005; EN 61000 4-2:2009;

EN61000 4-4:2010; EN 61000 4-5:2006; EN 61000 4-6:2009;

EN61000 4-11:2004

5) 2014/30/EU; 2006/42/EC; 2011/65/EU; 2012/19/EU

DICHIARAZIONE DI CONFORMITA' UE

EU DECLARATION OF CONFORMITY

DÉCLARATION EU DE CONFORMITÉ

EU-KONFORMITÄTSERKLÄRUNG

DECLARACIÓN EU DE CONFORMIDAD

DECLARAÇÃO EU DE CONFORMIDADE

Il sottoscritto (1), autorizzato dall’azienda (2), dichiara che la lavastoviglie elettrica per uso collettivo (3) è stata progettata e costruita in conformità alle

norme armonizzate (4) secondo quanto prescritto dalle seguenti direttive e successivi emendamenti (5) e in applicazione a quanto previsto dalle direttive

citate, è stata dotata di Marcatura CE e sono stati predisposti i fascicoli tecnici presso la nostra sede (2). Tale dichiarazione riguarda esclusivamente la

macchina nello stato in cui è stata immessa sul mercato, escludendo i componenti aggiunti e/o le operazioni eﬀ ettuate successivamente dall’utente ﬁ nale.

Declina ogni responsabilità per sinistri a persone, a cose o ad animali derivanti da manomissione della macchina da parte di terzi, ovvero da carenze di

manutenzione, di riparazione o di installazione della stessa da parte di personale non qualiﬁ cato.(*)

The undersigned (1), autorized by the company(2), hereby declares that the commercial electric dishwashing machine (3) is in compliance with the

harmonised standards (4) according to the following directives and further amendments (5) and pursuant of the above mentioned directives, the CE Marking

have been applied. Furthermore, adeguate technical ﬁ les have been prepared and are available at our oﬃ ces (2). This declaration relates exclusively to

the machinery in the state in which it was placed on the market, and excludes components which are added and/or operations carried out subsequently

by the ﬁ nal user. Declines all responsibility for damages to people, properties and animals resulting from bad servicing of the machine by third parties as

from inadequate maintenance or repairs or installation by unskilled technicians.

Le soussigné (1), désigné par la societé (2), déclare que le lave-vaisselle électrique à usage collectif (3) est conforme aux normes harmonisées (4) selon

les prescriptions et directives suivantes et les amendements successifs (5) et en application des directives citées, il porte le Marquage CE. Les dossiers

techniques sont déposés dans notre siège (2). Cette déclaration concerne exclusivement la machine dans l’état dans lequel elle a été mise sur le marché

et exclut les composants ajoutés et/ou les opérations eﬀ ectuées par la suite par l’utilisateur ﬁ nal. Décline toute responsabilité pour tout sinistre à personnes,

choses ou animaux résultant de l'endommagement de la machine par un tiers, c'est-à-dire dû à une maintenance, des réparations ou une installation

inadéquates eﬀ ectuées par du personnel non-qualiﬁ é.

Der Unterzeichenete (1) berechtigt von der Firma (2), erklärt, daß die elektrischen Spülmaschinen für den gewerblichen Gebrauch (3). In Übereinstimmung

mit den harmonisierten Normen ist (4) gemäß folgender Richtlinien und deren nachfolgenden Änderungen (5) und daß in Übereinstimmung mit den

erwähnten Richtlinien die CE-Kennzeichnung angebracht wurde und daß die relevanten technischen Unterlagen zusammengestellt wurden (2). Diese

Erklärung bezieht sich nur auf die Maschine in dem Zustand, in dem sie in Verkehr gebracht wurde; vom Endnutzer nachträglich angebrachte Teile und/

oder nachträglich vorgenommene Eingriﬀ e bleiben unberücksichtigt. Jede Verantwortung für an Personen, Sachen und Tieren verursachten Schäden, die

durch die Manipulation seitens Dritten, beziehungsweise auf mangelhafte Wartung und Reparaturarbeiten oder Installation von unqualiﬁ ziertem Personal

zurückzuführen sind, werden abgelehnt.

Quien subscribe (1), elegido de la empresa (2), declara que el lavavajilla eléctrico de uso colectivo (3) es conforme a las normas armonizadas (4) como

la prescripción de la siguientes directivas y sucesivas enmiendas (5) y, conforme con lo previsto en las citadas directivas, han recibido el Marcado CE.

Existe asimismo los especiﬁ co expediente técnico relativo disponible en nuestro domicilio (2). Esta declaración se reﬁ ere únicamente a las máquinas en

el estado en que se comercialicen, con exclusión de los elementos añadidos y/o de las operaciones que realice posteriormente el usuario ﬁ nal. Declina

toda responsabilidad por daños a personas, cosas o animales producidos del mal servicio de la máquina por terceras partes asi como por reparaciones

o mantenimiento indadecuados o de instalaciones por parte del personal no cualiﬁ cado.

O abaixo-assinado (1), autorizado pela empresa (2), vem por este meio declarar que a máquina de lavar louça para uso comercial (3) esta de acordo com

as normasharmonizadas (4) de acordo com o previsto pelas seguintes diretivas e posteriores alterações (5) a Marcação CE foi aplicada no seguimento

das diretivas mencionadas. Os processos técnicos estão preparados e adequados e encontram-se disponíveis na nossa sede (2). Esta declaração diz

respeito apenas à máquina tal como se encontra no momento da colocação no mercado, excluindo-se os componentes adicionados e/o

u as operações

efectuadas posteriormente pelo utilizador ﬁ nal. Declina toda e qualquer responsabilidade por danos causados a pessoas, bens e animais, resultantes do

mau manuseamento da máquina por parte de terceiros assim como manutenção incorrecta ou reparações inadequadas ou instalação por pessoal não

qualiﬁ cado.

(*) Lingua originale / Original language / Originalsprache / Langue originale / Idioma original / Idioma original