Mode d'Emploi P30 Pro - VOG-L29 Manuale del proprietario

Quick Start Guide

Guide de démarrage rapide

Schnellstartanleitung

Guida di avvio rapido

Guía de inicio rápido

Guia de Início Rápido

Snelstartgids

VOG-L29

Contents

English (United Kingdom)............................................... 1

Français........................................................................ 13

Deutsch.........................................................................27

Italiano......................................................................... 40

Español.........................................................................52

Português..................................................................... 65

Nederlands................................................................... 77

i

Know Your Device

Before using the device, familiarise yourself with its basic

operations.

l To power on your device, press and hold the power button

until the screen turns on.

l To power off your device, press and hold the power button,

and then touch .

l To restart your device, press and hold the power button,

and then touch .

l Press and hold the power button for 10 or more seconds to

forcibly restart your device.

NFC

4

1

2

5

3

Volume button Power button

Type-C port / Headset

jack Card slot

In-screen ngerprint

l Please keep the NFC area close to other devices or

objects while using the NFC function.

l Check out the pre-installed Tips app and master all the

great features on your device.

English (United Kingdom)

1

Getting Started

l Do not insert or remove the SIM card when your device

is powered on.

l Ensure that the card is correctly aligned and its notch is

rst inserted into the card tray.

l Be careful not to scratch your device or hurt yourself

when using the eject pin.

l Store the eject pin out of the reach of children to

prevent accidental swallowing or injury.

l Do not use cut or modied SIM or NM cards (nano

memory cards) with your device as these may not be

recognised and could damage the card tray (slot).

l If your SIM card does not match your device, please

contact your network provider.

Follow the instructions in the following gures to set up your

device. Please use the eject pin included.

3

2

1

nano-SIM 1

nano-SIM 2

NM Card

nano-SIM 1

2

Dual SIM Card Management

Your device supports dual card dual standby. Under Settings >

Wireless & networks > Dual SIM settings, select the default

mobile data card and calling card as needed.

Dual 4G

l If both of your SIM cards support 4G services, when one of

them is active on a 4G voice call, you will be prompted to

handle any new call to the other SIM card. Answering the

new call will automatically end the active call.

l The default mobile data SIM card can still be used for

Internet surng on a 4G network when the other card is on

a 4G voice call.

l Some of the aforementioned features may be

unavailable in certain areas due to network

interference.

l 4G voice services require the support of your network

provider and the deployment of relevant services.

Contact your network provider to activate 4G services.

l If this guide is inconsistent with the description on the

ofcial website, the latter prevails.

3

For More Information

If you encounter any problems whilst using your device, you

can get help from the following resources:

l Visit http://consumer.huawei.com/en to view device

information, frequently asked questions and other

information.

l Visit http://consumer.huawei.com/en/support for the most

up-to-date contact information for your country or region.

l You can nd service hotlines, retailer addresses, service

policies and more information for your local region in

HiCare.

Go to Settings and touch System > About phone > Legal to

view legal information for your product.

Go to Settings and touch System > About phone > Legal >

Safety information to view safety information for your

product.

Go to Settings and touch System > About phone >

Authentication info to view regulatory information for your

product.

Go to Settings and touch System > Certication logos to

view more information on certication logos for your product.

All pictures and illustrations in this guide, including but

not limited to the device colour, size, and display content,

are for your reference only. The actual device may vary.

Nothing in this guide constitutes a warranty of any kind,

express or implied.

4

Safety Information

Please read all of the safety information carefully before using

your device to ensure its safe and proper operation and to

learn how to dispose of your device properly.

Operation and Safety

l To prevent possible hearing damage, do not

listen at high volume levels for long periods.

l Using an unapproved or incompatible power adapter,

charger or battery may damage your device, shorten its

lifespan or cause a re, explosion or other hazards.

l Ideal operating temperatures are 0 °C to 35 °C. Ideal

storage temperatures are -20 °C to +45 °C.

l Pacemaker manufacturers recommend maintaining a

minimum distance of 15 cm between a pacemaker and a

wireless device to prevent potential interference with the

pacemaker. If using a pacemaker, hold the device on the

side opposite the pacemaker and do not carry the device in

your front pocket.

l Keep the device and the battery away from re, excessive

heat and direct sunlight. Do not place them on or in heating

devices, such as microwave ovens, water heaters, stoves or

radiators.

l Adhere to local laws and regulations while using the device.

To reduce the risk of accidents, do not use your wireless

device while driving. If you must make or answer a call,

stop your vehicle at a safe location rst.

l While ying in an aircraft or immediately before boarding,

ensure that you use your device according to the

instructions provided. Using a wireless device in an aircraft

may disrupt wireless networks, present a hazard to aircraft

operations or be illegal under law.

l To prevent damage to your device's parts or internal

circuits, do not use it in dusty, smoky, damp or dirty

environments or near magnetic elds.

l When charging the device, make sure the power adapter is

plugged into a socket near the devices and is easily

accessible.

l Unplug the charger from the electric socket and from the

device when not in use.

5

l Do not use, store or transport the device where ammables

or explosives are stored (e.g. in a petrol station, oil depot or

chemical plant). Using your device in these environments

increases the risk of explosion or re.

l Dispose of this device, the battery and accessories

according to local regulations. They should not be disposed

of in normal household waste. Improper battery use may

lead to re, explosion or other hazards.

l Please consult your doctor and the device manufacturer to

determine if operation of your device may interfere with the

operation of your medical device.

l Adhere to any rules or regulations set forth by hospitals and

health care facilities.

l This device contains a built-in battery. Do not attempt to

replace the battery by yourself. Otherwise, the device may

not run properly or it may damage the battery. For your

personal safety and to ensure that your device runs

properly, you are strongly advised to contact a Huawei

authorised service centre for a replacement.

l Your device has been tested in a controlled environment

and certied to be splash, water, and dust resistant in

specic situations (meets requirements of classication IP68

as described by the international standard IEC 60529).

Splash, water, and dust resistance are not permanent

conditions and resistance might decrease as a result of

normal wear. Do not charge your device in wet conditions.

Visit http://consumer.huawei.com/en/support for detailed

description of this function.

Potentially Explosive Atmosphere

Power off your device in any area with a potentially explosive

atmosphere, and comply with all signs and instructions. Areas

that may have potentially explosive atmospheres include the

areas where you would normally be advised to turn off your

vehicle engine. Triggering of sparks in such areas could cause

an explosion or a re, resulting in bodily injuries or even

deaths. Do not power on your device at refueling points such

as service stations. Comply with restrictions on the use of radio

equipment in fuel depots, storage, and distribution areas, and

chemical plants. In addition, adhere to restrictions in areas

where blasting operations are in progress. Before using the

device, watch out for areas that have potentially explosive

atmospheres that are often, but not always, clearly marked.

Such locations include areas below the deck on boats,

chemical transfer or storage facilities, and areas where the air

6

contains chemicals or particles such as grain, dust, or metal

powders. Ask the manufacturers of vehicles using liqueed

petroleum gas (such as propane or butane) whether this device

can be safely used in their vicinity.

Disposal and recycling information

The crossed-out wheelie bin symbol on your product, battery,

literature or packaging reminds you that all electronic products

and batteries must be taken to separate waste collection

points at the end of their working lives; they must not be

disposed of in normal household waste. It is the responsibility

of the user to dispose of the equipment using a designated

collection point or service for separate recycling of waste

electrical and electronic equipment (WEEE) and batteries

according to local laws.

Proper collection and recycling of your equipment helps ensure

EEE waste is recycled in a manner that conserves valuable

materials and protects human health and the environment.

Improper handling, accidental breakage, damage, and/or

improper recycling at the end of its life may be harmful for

your health and the environment. For more information about

where and how to drop off your EEE waste, please contact

your local authorities, retailer or household waste disposal

service or visit the website http://consumer.huawei.com/en/.

Reduction of hazardous substances

This device and any electrical accessories are compliant with

local applicable rules on the restriction of the use of certain

hazardous substances in electrical and electronic equipment,

such as EU REACH, RoHS and Batteries (where included)

regulations, etc. For declarations of conformity about REACH

and RoHS, please visit our web site http://

consumer.huawei.com/certication.

EU Regulatory Conformance

Body worn operation

The device complies with RF specications when used near

your ear or at a distance of 0.50 cm from your body. Ensure

that the device accessories, such as a device case and device

holster, are not composed of metal components. Keep the

device away from your body to meet the distance requirement.

7

The highest SAR value reported for this device type when

tested at the ear is

VOG-L29 0.64 W/kg

And when properly worn on the body is

VOG-L29 0.99 W/kg

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device

VOG-L29 is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU.

The most recent and valid version of the DoC (Declaration of

Conformity) can be viewed at http://consumer.huawei.com/

certication.

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is

used.

This device may be restricted for use, depending on the local

network.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical

area within a radius of 20 km from the centre of Ny-Ålesund.

Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the

packaging shows that this radio equipment will be subject to

some restrictions when placed on the market in Belgium (BE),

Bulgaria (BG), the Czech Republic (CZ), Denmark (DK),

Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES),

France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV),

Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT),

Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT),

Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden

(SE), the United Kingdom (UK), Turkey (TR), Norway (NO),

Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use

only when operating in the 5150 to 5350 MHz frequency

range.

Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates:

Some bands may not be available in all countries or all areas.

Please contact the local network provider for more details.

(b) Maximum radio-frequency power transmitted in the

frequency bands in which the radio equipment operates: The

maximum power for all bands is less than the highest limit

value specied in the related Harmonised Standard.

8

The frequency bands and transmitting power (radiated and/or

conducted) nominal limits applicable to this radio equipment

are as follows:

VOG-L29 GSM900: 35 dBm, GSM1800: 32 dBm,

WCDMA900/ 2100: 25.7 dBm, LTE Band

1/3/7/8/20/28/34/38/40: 25.7 dBm, Wi-Fi 2.4G:

20 dBm, Bluetooth: 20 dBm, Wi-Fi 5G:

5150-5250 MHz: 23 dBm, 5250-5350: 20 dBm,

5470-5725 MHz: 20 dBm, 5725-5850 MHz:

13dBm, NFC: 42 dBuA/m at 10m, Wireless

Power Charging: < 42 dBuA/m at 10m

Accessories and Software Information

Some accessories are optional in certain countries or regions.

Optional accessories can be purchased from a licenced vendor

as required. The following accessories are recommended:

Adapters: HW-100400X00 (X represents the different plug

types used, which can be either C, U, J, E, B, A, I, R, Z or K,

depending on your region)

Batteries: HB486486ECW

Earphones: MEND1632B729000, Windy-C, 1331-3301-6001-

TC-296, 618017

The product software version is VOG-L29:

9.1.0.84(C432E84R1P1). Software updates will be released by

the manufacturer to x bugs or enhance functions after the

product has been released. All software versions released by

the manufacturer have been veried and are still compliant

with the related rules.

All RF parameters (for example, frequency range and output

power) are not accessible to the user, and cannot be changed

by the user.

For the most recent information about accessories and

software, please see the DoC (Declaration of Conformity) at

http://consumer.huawei.com/certication.

ErP Product Information

Huawei Technologies Co., Ltd. hereby declares that its

products conform to the Energy-related Products Directive

(ErP) 2009/125/EC. For detailed ErP information and the user

manuals required by Commission Regulation, please visit:

http://consumer.huawei.com/en/certication.

FCC Regulatory Compliance

Body worn operation

The device complies with RF specications when used near

your ear or at a distance of 1.50 cm from your body. Ensure

9

that the device accessories, such as a device case and device

holster, are not composed of metal components. Keep the

device away from your body to meet the distance requirement.

Certication information (SAR)

This device is also designed to meet the requirements for

exposure to radio waves established by the Federal

Communications Commission (USA).

The SAR limit adopted by the USA is 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported to the FCC

for this device type complies with this limit.

The highest SAR value reported to the FCC for this device type

when using it at the ear is

VOG-L29 0.79 W/kg

And when properly worn on the body is

VOG-L29 0.64 W/kg

And when using the Wi-Fi hotspot function is

VOG-L29 0.88 W/kg

FCC statement

This device has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This device generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

device does cause harmful interference to radio or television

reception, which can be determined by turning the equipment

off and on, the user is encouraged to perform one or more of

the following operations to try to correct the interference:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the device into an outlet on a circuit different from

that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for

help.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

10

Caution: Any changes or modications to this device not

expressly approved by Huawei Technologies Co., Ltd. for

compliance could void the user's authority to operate the

device.

11

Legal Notice

Trademarks and Permissions

, , and are trademarks or

registered trademarks of Huawei Technologies Co., Ltd.

Manufactured under license from Dolby Laboratories. Dolby,

Dolby Atmos, and the double-D symbol are trademarks of

Dolby Laboratories.

Android™ is a trademark of Google Inc.

LTE is a trade mark of ETSI.

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Huawei Technologies Co., Ltd. is under license.

Wi-Fi

®

, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are

trademarks of Wi-Fi Alliance.

The N-Mark is a trademark or registered trademark

of NFC Forum, Inc. in the United States and in other countries.

The "Qi" symbol is a trademark of the Wireless Power

Consortium.

Privacy Policy

To better understand how we protect your personal

information, please see the privacy policy at http://

consumer.huawei.com/privacy-policy.

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND

DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.

12

Apprenez le fonctionnement de

votre appareil

Avant d'utiliser votre appareil, veuillez vous familiariser avec

son fonctionnement de base.

l Pour mettre votre appareil sous tension, appuyez

longuement sur le bouton alimentation jusqu’à ce que

l’écran s’allume.

l Pour mettre votre appareil hors tension, appuyez

longuement sur le bouton d’alimentation, puis touchez

.

l Pour redémarrer votre appareil, appuyez longuement sur le

bouton d'alimentation, puis touchez .

l Maintenez enfoncé le bouton d'alimentation pendant 10

secondes ou plus pour forcer le redémarrage de l'appareil.

NFC

4

1

2

5

3

Bouton du volume Bouton marche/arrêt

Port de type C / prise

jack pour casque

Emplacement pour

carte

Empreinte digitale

intégrée à l'écran

Français

13

l Lorsque vous utilisez la fonction NFC, veuillez maintenir

la zone NFC à proximité des autres appareils ou objets.

l Découvrez l'application préinstallée Astuces et

apprenez à maitriser toutes les excellentes fonctions de

votre appareil.

14

Prise en main

l N'insérez pas ni ne retirez la carte SIM lorsque votre

appareil est sous tension.

l Assurez-vous que la carte est correctement orientée et

son encoche insérée en premier dans le tiroir de cartes.

l Faites attention de ne pas éraer votre appareil ni de

vous blesser en utilisant la broche d'éjection.

l Conservez la broche d'éjection hors de la portée des

enfants pour éviter toute ingestion ou blessure

accidentelle.

l N'utilisez pas de cartes SIM ou NM (cartes mémoires

nano) modiées ou découpées dans votre appareil, car

elles risquent de ne pas être détectées ou

d'endommager le tiroir de cartes (emplacement).

l Si votre carte SIM ne correspond pas à votre appareil,

veuillez contacter votre opérateur.

Pour congurer votre appareil, suivez les instructions

présentées sur les illustrations suivantes. Veuillez utiliser la

broche d'éjection fournie.

Pour un usage optimal et vous offrir une compatibilité avec les

services de votre opérateur, nous vous recommandons de

mettre votre carte SIM dans l’emplacement SIM 1 indiqué ci-

dessous.

3

2

1

nano-SIM 1

nano-SIM 2

NM Card

nano-SIM 1

15

Gestion de double SIM

Votre appareil prend en charge la double veille double carte.

Sous Paramètres > Sans l & réseaux > Gestion des cartes

SIM, sélectionnez la carte de données mobiles et la carte

d'appels par défaut selon vos besoins.

Double 4G

l Si vos 2 cartes SIM prennent en charge la 4G, lorsque l'une

d'entre elles est utilisée pour un appel vocal en 4G, il vous

sera demandé de traiter tout nouvel appel avec l'autre carte

SIM. Prendre le nouvel appel mettra automatiquement n à

la communication en cours.

l La carte SIM de données mobiles par défaut peut toujours

être utilisée pour surfer sur Internet sur le réseau 4G lorsque

l'autre carte est utilisée pour un appel vocal en 4G.

l Certaines fonctionnalités mentionnées ci-dessus

peuvent être indisponibles dans certaines zones en

raison d'interférences sur le réseau.

l Les services voix 4G requièrent la prise en charge du

réseau et le déploiement de services relatifs de votre

opérateur. Veuillez contacter votre opérateur pour

activer les services 4G.

l Si ce guide est en contradiction avec la description sur

le site Web ofciel, cette dernière prévaudra.

16

La pagina si sta caricando...

Mode d'Emploi P30 Pro - VOG-L29 Manuale del proprietario

Questo manuale è adatto anche per

Mode d'Emploi P30 Pro - VOG-L29 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti