Mode AVIC-F9310BT Manuale del proprietario

Installation Manual

Manuel d’installation

NAVIGATION AV SYSTEM

SYSTEME DE NAVIGATION AV

SISTEMA DI NAVIGAZIONE AV

SISTEMA DE NAVEGACIÓN AV

NAVIGATIONS-/AV-SYSTEM

AV NAVIGATIESYSTEEM

AVIC-F9310BT

Some wiring and installation are described in the

separate installation manual.

Certains câblages et procédés d’installation sont décrits

dans le manuel d’installation séparé.

Alcuni dati di cablaggio e installazione sono descritti nel

Manuale d’installazione separato.

En el manual de instalación independiente se describe

parte del proceso de cableado e instalación.

Gewisse Verkabelungs- und Installationsarbeiten sind in

der separaten Einbauanleitung beschrieben.

Sommige bedradings- en installatie-informatie staat in

de afzonderlijke installatiehandleiding.

English NederlandsDeutschEspañolItalianoFrançais

Precautions

Your new navigation system and this

manual 3

Important safeguards 3

Connecting the system

Precautions before connecting the

system 4

Before installing this product 4

To prevent damage 5

– Notice for the blue lead 5

– Notice for the violet/white lead 5

Parts supplied 6

Connecting the system 8

When connecting to separately sold power

amp 10

When connecting a rear view camera 12

When connecting the external video

component 13

– Using an AV input (AV1) 13

– Using an AV input (AV2) 14

When connecting the rear display 14

– When using a rear display connected to

rear video output 14

Installation

Precautions before installation 15

To avoid electromagnetic interference 15

Before installing 15

Installing the navigation system 16

– Installation notes 16

Concealing the metal brackets 17

Installing the GPS aerial 18

– Installation notes 18

– Parts supplied 18

– When installing the aerial inside the

vehicle (on the dashboard or rear

shelf) 19

Installing the microphone 20

– Parts supplied 20

– Mounting on the sun visor 20

– Installation on the steering column 21

– Adjusting the microphone angle 21

Contents

Engb

2

Your new navigation

system and this manual

! The navigation features of this product

(and the rear view camera option if pur-

chased) are intended solely to aid you in

the operation of your vehicle. It is not a sub-

stitute for your attentiveness, judgement

and care when driving.

! Never use this navigation system to route

to hospitals, police stations, or similar facil-

ities in an emergency. Please call the ap-

propriate emergency number.

! Do not operate this navigation system (or

the rear view camera option if purchased) if

doing so will divert your attention in any

way from the safe operation of your vehicle.

Always observe safe driving rules and fol-

low all existing traffic regulations. If you ex-

perience difficulty in operating the system

or reading the display, park your vehicle in

a safe location and apply the handbrake be-

fore making the necessary adjustments.

! This manual explains how to install this na-

vigation system in your vehicle. However,

some wiring and installation are described

in the separate installation manual. Opera-

tion of this navigation system is explained

in a separate manual.

! Do not install this product where it may (i)

obstruct the driver’s vision, (ii) impair the

performance of any of the vehicle’s operat-

ing systems of safety features, including

airbags, hazard lamp buttons, or (iii) impair

the driver’s ability to safely operate the vehi-

cle. In some cases, it may not be possible

to install this product because of the vehi-

cle type or the shape of the vehicle inter-

ior.

Important safeguards

WARNING

Pioneer does not recommend that you install

your navigation system yourself. We recom-

mend that only authorised Pioneer service

personnel, who have special training and ex-

perience in mobile electronics, set up and in-

stall this product. NEVER SERVICE THIS

PRODUCT YOURSELF. Installing or servi-

cing this product and its connecting cables

may expose you to the risk of electric shock

or other hazards, and can cause damage to

the navigation system that is not covered by

warranty.

! Read this manual fully and carefully before

installing your navigation system.

! Keep this manual handy for future refer-

ence.

! Pay close attention to all warnings in this

manual and follow the instructions care-

fully.

! This navigation system may in certain cir-

cumstances display inaccurate position of

your vehicle, the distance of objects shown

on the screen, and compass directions. In

addition, the system has certain limita-

tions, including the inability to identify one-

way streets, temporary traffic restrictions

and potentially unsafe driving areas. Please

exercise your own judgement in the light of

actual driving conditions.

! As with any accessory in your vehicle’s in-

terior, the navigation system should not di-

vert your attention from the safe operation

of your vehicle. If you experience difficulty

in operating the system or reading the dis-

play, please make adjustments while safely

parked.

! Please remember to wear your seat belt at

all times while operating your vehicle. If

you are in an accident, your injuries can be

considerably more severe if your seat belt

is not properly fastened.

! Certain country and government laws may

prohibit or restrict the placement and use

of this system in your vehicle. Please com-

ply with all applicable laws and regulations

regarding the use, installation and opera-

tion of your navigation system.

Engb

3

English

Section

01

Precautions

Precautions before

connecting the system

CAUTION

! If you decide to perform the installation

yourself, and have special training and ex-

perience in the mobile electronics instal-

lations, please carefully follow all of the

steps in the installation manual.

! Secure all wiring with cable clamps or

electrical tape. Do not allow any bare wir-

ing to remain exposed.

! It is extremely dangerous to allow cables

to become wound around the steering col-

umn or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or hin-

der driving.

! Make sure that the cables and wires will

not interfere with or become caught in

any of the vehicle’s moving parts, espe-

cially the steering wheel, gearstick, hand-

brake, sliding seat tracks, doors, or any of

the vehicle’s controls.

! Do not route wires where they will be ex-

posed to high temperatures. If the insula-

tion heats up, wires may become

damaged, resulting in a short circuit or

malfunction and permanent damage to

the product.

! Do not cut the GPS aerial cable to shorten

it or use an extension to make it longer.

Altering the aerial cable could result in a

short circuit or malfunction.

! Do not shorten any leads. If you do, the

protection circuit (fuse holder, fuse resis-

tor or filter, etc.) may fail to work properly.

! Never feed power to other electronic pro-

ducts by cutting the insulation of the

power supply lead of the navigation sys-

tem and tapping into the lead. The current

capacity of the lead will be exceeded,

causing overheating.

Before installing this product

! Use this unit with a 12-volt battery and ne-

gative earthing only. Failure to do so may

result in a fire or malfunction.

! To avoid shorts in the electrical system, be

sure to disconnect the (–) battery cable be-

fore installation.

Engb

4

Section

02

Connecting the system

To prevent damage

WARNING

! Use speakers over 50 W (output value)

and between 4 W to 8 W (impedance value).

Do not use 1 W to 3 W speakers for this

unit.

! When replacing the fuse, be sure to only

use a fuse of the rating prescribed on this

product.

! When disconnecting a connector, pull the

connector itself. Do not pull the lead, as

you may pull it out of the connector.

! This product cannot be installed in a vehi-

cle without ACC (accessory) position on

the ignition switch.

A

C

O

N

S

T

A

R

T

O

F

O

N

S

T

A

R

T

O

F

ACC position No ACC position

! To avoid short-circuiting, cover the discon-

nected lead with insulating tape. It is espe-

cially important to insulate all unused

speaker leads, which if left uncovered may

cause a short circuit.

! Refer to the owner’s manual for details on

connecting the power amp and other units,

then make connections accordingly.

! Since a unique BPTL circuit is employed,

do not directly earth the * side of the

speaker lead or connect the * side of an-

other side of the speaker lead together. Be

sure to connect the * side of the speaker

lead to the * side of the speaker lead on

this navigation system.

! If the RCA pin jack on this product will not

be used, do not remove the caps attached

to the end of the connector.

Notice for the blue lead

! When the ignition switch is turned on (ACC

ON), a control signal is output through the

blue lead. Connect to an external power

amp’s system remote control terminal, the

auto-aerial relay control terminal, or the

aerial booster power control terminal (max.

300 mA 12 V DC). The control signal is out-

put through the blue lead, even if the audio

source is switched off.

! Be sure not to use this lead as the power

supply lead for the external power amps.

Such connection could cause excessive

current drain and malfunction.

! Be sure not to use this lead as the power

supply lead for the auto-aerial or aerial

booster. Such connection could cause ex-

cessive current drain and malfunction.

Notice for the violet/white lead

! The violet/white lead must be connected so

that the navigation system can detect

whether the vehicle is moving forwards or

backwards. Connect the violet/white lead to

the lead whose voltage changes when the

reverse gear is engaged. Unless connected,

the sensor may not detect your vehicle tra-

velling forwards/backwards properly, and

thus your vehicle position as detected by

the sensor may not correspond to the ac-

tual position.

Engb

5

English

Section

02

Connecting the system

Parts supplied

The navigation unit

RDS-TMC tuner USB and mini-jack

connector

RCA connector GPS aerial

Microphone

Engb

6

Section

02

Connecting the system

Engb

7

English

Section

02

Connecting the system

The navigation unit

Wired remote input

Please refer to the

instruction manual

for the Wired Remote

Control Adapters

(sold separately).

Vehicle Bus adapter input

Please refer to the instruction

manual for the Vehicle Bus

adapter (sold separately).

Power cord

For connection, refer to the wiring and

installation manual separately supplied.

Audio source will be set to mute or attenuate, while the

following sounds will not be muted or attenuated. For details,

refer to Operation Manual.

— voice guidance of the navigation

— incoming ringtone and incoming voice of the mobile

phone that is connected to this navigation system via

Bluetooth wireless technology

15 cm

Note

RCA connector

Yellow/black

If you use an equipment with mute

function, connect that equipment to the

Audio Mute lead. If not, keep this lead free

of any connections.

RDS-TMC tuner

Vehicle aerial

Fuse (10 A)

Aerial jack

30 cm

1 m

Engb

8

Section

02

Connecting the system

Dock

Connector

port

WARNING

· To avoid the risk of accident and the potential

violation of applicable laws, this product should never

be used while the vehicle is being driven except for

navigation purposes. And, also rear displays should

not be in a location where it is a visible distraction to

the driver.

· In some countries, the viewing of images on a display

inside a vehicle even by persons other than the driver

may be illegal. Where such regulations apply they

must be obeyed and this product’s video source

should not be used.

USB and mini-jack

connector

(

*

2)

— When connecting your iPod, both

connections are necessary.

— You must set “AV1 Input” in “AV

System Settings” to “iPod” when

connecting the iPod. (For details, refer

to Operation Manual.)

(

*

2)

USB Interface Cable for iPod

(CD-IU51V) (sold separately)

iPod with

Dock Connector (*3)

(*3)

For details concerning

operations and compatibility,

refer to Operation Manual.

2 m

4 m

Microphone

3.55 m

GPS aerial

(

*

1)

Connect either the USB Interface

Cable for iPod or an appropriate USB

storage device.

(

*

1)

Engb

9

English

Section

02

Connecting the system

When connecting to separat ely sold power amp

The navigation unit

RCA connector

Subwoofer outputs

(SWL, SWR)

To system control terminal of the power amp

(max. 300 mA 12 V DC).

For connection, refer to the wiring and installation

manual separately supplied.

Blue

Rear outputs

(REAR OUTPUT)

Front outputs

(FRONT OUTPUT)

15 cm

Engb

10

Section

02

Connecting the system

























Left Right

System remote control

You can change the RCA output of the subwoofer depending on your subwoofer

system. (Refer to Operation Manual.)

Note

Power amp

(sold separately)

Power amp

(sold separately)

Power amp

(sold separately)

Front speaker Front speaker

Rear speaker Rear speaker

Subwoofer Subwoofer

RCA

cables

(sold separately)

Engb

11

English

Section

02

Connecting the system

When connecting a rear

view camera

When this product is used with a rear view

camera, it is possible to automatically switch

from the video to rear view image when the

gearstick is moved to REVERSE (R). Rear

View mode also allows you to check what is

behind you while driving.

When you use a rear view camera, please be

sure to connect the violet/white lead. Other-

wise the rear view camera picture will not ap-

pear automatically when the vehicle is

reversing.

Instructions for proper connection of the vio-

let/white lead are contained in the wiring and

installation manual that is supplied separately.

WARNING

USE INPUT ONLY FOR REVERSE OR MIRROR

IMAGE REAR VIEW CAMERA. OTHER USE MAY

RESULT IN INJURY OR DAMAGE.

CAUTION

! The screen image may appear reversed.

! The rear view camera is used as an aid to

keep an eye on trailers, or backing into a tight

parking spot. Do not use this function for en-

tertainment purposes.

! Objects in rear view may appear closer or

more distant than in reality.

! Please note that the image area shown by the

rear view camera may differ slightly when full-

screen images are displayed when backing

and when checking the rear of the vehicle

while moving forward.

The navigation unit

20 cm

(e.g. ND-BC4)

(sold separately)

Rear view camera

To video output

RCA cable

Brown

(REAR VIEW CAMERA IN)

RCA connector

Notes

! This mode is available when the rear view

camera setting is set to “On”. (For details,

refer to Operation Manual.)

! Connect the navigation system to the rear

view camera only. Do not connect to any

other equipment.

Engb

12

Section

02

Connecting the system

When connecting the

external video component

Using an AV input (AV1)

The navigation unit

RCA cables

(sold separately)

Yellow

Red, white

External video

component

(sold separately)

To video output

To audio outputs

Mini-jack AV cable

(CD-RM10)

(sold separately)

USB and

mini-jack connector

2 m

! You must set “AV1 Input” in “AV System

Settings” to “Video” when connecting the

external video component. (For details,

refer to Operation Manual.)

CAUTION

Be sure to use a mini-jack AV cable (CD-RM10)

(sold separately) for wiring. If you use other

cables, the wiring position might differ resulting

in disturbed images and sounds.

OK

G

V

R

L

G

R

V

L

L : Left audio (White)

R : Right audio (Red)

V : Video (Yellow)

G : Earth

Engb

13

English

Section

02

Connecting the system

Using an AV input (AV2)

To audio outputs

Yellow

(VIDEO INPUT)

RCA connector

Red, white

(AUDIO INPUT)

RCA cables

(sold separately)

To video output

The navigation unit

External video

component

(sold separately)

20 cm

! You must set “AV2 Input” in “AV System

Settings” to “Video” when connecting the

external video component. (For details,

refer to Operation Manual.)

When connecting the rear

display

The navigation unit

Rear display with

RCA input jacks

Yellow

(VOUT)

RCA cable

(sold separately)

To video input

When using a rear display

connected to rear video output

WARNING

NEVER install the rear display in a location

that enables the driver to watch the video

source while driving.

This navigation system’s rear video output is for

connection of a display to enable passengers in

the rear seats to watch the video source.

Engb

14

Section

02

Connecting the system

Precautions before

installation

CAUTION

! Never install this product in places where,

or in a manner that:

— Could injure the driver or passengers if

the vehicle stops suddenly.

— May interfere with the driver’s opera-

tion of the vehicle, such as on the floor

in front of the driver’s seat, or close to

the steering wheel or gearstick.

! Make sure there is nothing behind the

dashboard or panelling when drilling

holes in them. Be careful not to damage

fuel lines, brake lines, electronic compo-

nents, communication wires or power

cables.

! When using screws, do not allow them to

come into contact with any electrical lead.

Vibration may damage wires or insulation,

leading to a short circuit or other damage

to the vehicle.

! To ensure proper installation, use the sup-

plied parts in the manner specified. If any

parts other than the supplied ones are

used, they may damage internal parts of

this product or they may work loose and

the product may become detached.

! It is extremely dangerous to allow cables

to become wound around the steering col-

umn or gearstick. Be sure to install this

product, its cables, and wiring away in

such so that they will not obstruct or hin-

der driving.

! Make sure that leads cannot get caught in

a door or the sliding mechanism of a seat,

resulting in a short circuit.

! Please confirm the proper function of

your vehicle’s other equipment after in-

stallation of the navigation system.

! Do not install this navigation system

where it may (i) obstruct the driver’s vi-

sion, (ii) impair the performance of any of

the vehicle’s operating systems or safety

features, including airbags, hazard lamp

buttons or (iii) impair the driver’s ability

to safely operate the vehicle.

! Install the navigation system between the

driver’s seat and front passenger seat so

that it will not be hit by the driver or pas-

senger if the vehicle stops quickly.

! Never install the navigation system in

front of or next to the place in the dash-

board, door, or pillar from which one of

your vehicle’s airbags would deploy.

Please refer to your vehicle’s owner’s

manual for reference to the deployment

area of the frontal airbags.

To avoid electromagnetic

interference

In order to prevent interference, set the follow-

ing items as far as possible from this naviga-

tion system, other cables or leads:

! FM, MW/LW aerial and its lead

! GPS aerial and its lead

In addition, you should lay or route each aerial

lead as far as possible from other aerial leads.

Do not bind, lay or route them together, or

cross them. Electromagnetic noise will in-

crease the potential for errors in the vehicle's

location display.

Before installing

! Consult with your nearest dealer if installa-

tion requires drilling holes or other modifi-

cations of the vehicle.

! Before making a final installation of this

product, temporarily connect the wiring to

confirm that the connections are correct

and the system works properly.

Engb

15

English

Section

03

Installation

Installing the navigation

system

Installation notes

! Do not install the navigation system in

places subject to high temperatures or hu-

midity, such as:

— Places close to a heater, vent or air con-

ditioner.

— Places exposed to direct sunlight, such

as on top of the dashboard.

— Places that may be exposed to rain,

such as close to the door or on the vehi-

cle’s floor.

! Install this navigation system in an area

strong enough to bear its weight. Choose a

position where this navigation system can

be firmly installed, and install it securely. If

this navigation system is not securely in-

stalled, the current location of the vehicle

cannot be displayed correctly.

! Install the navigation unit horizontally on a

surface within 0 to 30 degrees tolerance

(within 5 degrees to the lef t or right). Impro-

per installation of the unit with the surface

tilted more than these tolerances increases

the potential for errors in the vehicle's loca-

tion display, and might otherwise cause re-

duced display performance.

30°

5° 5°

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you

leave ample space behind the rear panel

and wrap any loose cables so they are not

blocking the vents.

5cmcm

Leave ample

space

5 cm

! The cords must not cover the area shown

in the figure below. This is necessary to

allow the amps and navigation mechanism

to dissipate heat.

Do not cover this area.

! The semiconductor laser will be damaged

if it overheats, so don’t install the naviga-

tion unit anywhere hot — for instance, near

a heater outlet.

Engb

16

Section

03

Installation

Concealing the metal brackets

Use the supplied self-adhesive sheets to hide

the metal brackets inside that are visible from

the front panel slits.

Self-adhesive sheet

(4 pcs.)

1 Peel the release paper off the sheets.

2 Attach the sheets at the top and bot-

tom on both sides of the panel as illu-

strated below.

Engb

17

English

Section

03

Installation

Installing the GPS aerial

CAUTION

Do not cut the GPS aerial lead to shorten it

or use an extension to make it longer. Alter-

ing the aerial cable could result in a short cir-

cuit or malfunction and permanent damage

to the navigation system.

Installation notes

! The aerial should be installed on a level sur-

face where radio waves will be blocked as

little as possible. Radio waves cannot be re-

ceived by the aerial if reception from the sa-

tellite is blocked.

Dashboard Rear shelf

! When installing the GPS aerial inside the

vehicle, be sure to use the metal sheet pro-

vided with your system. If this is not used,

the reception sensitivity will be poor.

! Do not cut the accessory metal sheet. This

would reduce the sensitivity of the GPS aer-

ial.

! Take care not to pull the aerial lead when

removing the GPS aerial. The magnet at-

tached to the aerial is very powerful, and

the lead may become detached.

! Do not paint the GPS aerial, as this may af-

fect its performance.

Parts supplied

GPS aerial Metal sheet

Engb

18

Section

03

Installation

When installing the aerial inside the vehicle (on the dashboard or

rear shelf)

WARNING

Do not install the GPS aerial over any sen-

sors or vents on the dashboard of the vehicle,

as doing so may interfere with the proper

functioning of such sensors or vents and may

compromise the ability of the metal sheet

under the GPS aerial to properly and se-

curely affix to the dashboard.

Affix the metal sheet on the surface as level as

possible where the GPS aerial faces the win-

dow. Place the GPS aerial on the metal sheet.

(The GPS aerial is fastened with its magnet.)

The metal sheet contains a

strong adhesive which may

leave a mark on the surface if

it is removed.

Note

Clamps

Use separately sold clamps

to secure the lead where necessary

inside the vehicle.

GPS aerial

Metal sheet

Peel off the protective sheet

on the rear.

Make sure the surface is

free of moisture, dust,

grime, oil, etc., before

affixing the metal sheet.

Notes

! When attaching the metal sheet, do not cut

it into small pieces.

! Some models use window glass that does

not allow signals from GPS satellites to

pass through. On such models, install the

GPS aerial on the outside of the vehicle.

Engb

19

English

Section

03

Installation

Installing the microphone

! Install the microphone in a place where its

direction and distance from the driver

make it easiest to pick up the driver’s voice.

! Make sure to connect the microphone to

the navigation system after the system is

turned off (ACC OFF).

Parts supplied

Microphone Microphone clip

Double-sided tape

Mounting on the sun visor

1 Install the microphone in the micro-

phone clip.

Microphone clip Microphone

2 Attach the microphone clip to the sun

visor.

Microphone clip

Clamps

Use separately sold clamps

to secure the lead where ne-

cessar y inside the vehicle.

Install the microphone on the sun visor when

it is in the up position. It cannot recognise the

driver’s voice if the sun visor is in the down po-

sition.

Engb

20

Section

03

Installation

La pagina si sta caricando...

Mode AVIC-F9310BT Manuale del proprietario

Questo manuale è adatto anche per

Mode AVIC-F9310BT Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti